From: eric.paturage@orange.fr
To: linux-media@vger.kernel.org
Subject: regression : saa7134 with Pinnacle PCTV 50i (analog) can not tune anymore
Date: Sat, 4 Jul 2009 15:16:22 +0200 (CEST) [thread overview]
Message-ID: <200907041316.n64DGiQ04366@neptune.localwarp.net> (raw)
hello
I had my Pinnacle PCTV 50i analog tv card working quite well for several years
with linux . but since mid june it can not tune anymore when using the latest mercurial version
of the v4l2 drivers .
It is working fine up to the official V4l2 driver of 2.6.30 .
here is an example of /var/log/messages with official v4l2 drivers of 2.6.27.4 (working well) :
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
saa7134 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
saa7133[0]: found at 0000:00:0d.0, rev: 208, irq: 11, latency: 32, mmio: 0xed800000
saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
saa7133[0]: board init: gpio is 200c000
saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 76 03 24 31 05
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner' 1-004b: chip found @ 0x96 (saa7133[0])
tda829x 1-004b: setting tuner address to 61
tda829x 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
--------------------------------------------------------------------------------------------
here is what happens with the latest mercurial v4l2 driver (kernel 2.6.29.4) :
something is wrong with the tuner (module tda829x 1-004b does not get loaded ?).
[root@neptune v4l-dvb]# hg parent
changeset: 12172:0bb569fba22a
tag: tip
user: Mauro Carvalho Chehab <mchehab@redhat.com>
date: Fri Jul 3 15:36:18 2009 -0300
summary: em28xx: Add autodetection code for Silvercrest 1.3 mpix
saa7130/34: v4l2 driver version 0.2.15 loaded
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
saa7134 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
saa7133[0]: found at 0000:00:0d.0, rev: 208, irq: 11, latency: 32, mmio: 0xed800
000
saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [c
ard=77,autodetected]
saa7133[0]: board init: gpio is 200e000
IRQ 11/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 76 03 24 31 05
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
TUNER: Unable to find symbol tda829x_probe()
tuner 1-004b: chip found @ 0x96 (saa7133[0])
DVB: Unable to find symbol tda9887_attach()
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
IRQ 11/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
saa7133[0]/alsa: saa7133[0] at 0xed800000 irq 11 registered as card -1
Jul 2 09:12:43 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq
Jul 2 09:19:14 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq
Jul 2 09:20:16 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq
Jul 2 09:20:26 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq
any idea what is going on ?
thanks
next reply other threads:[~2009-07-04 13:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-04 13:16 eric.paturage [this message]
2009-07-04 16:48 ` regression : saa7134 with Pinnacle PCTV 50i (analog) can not tune anymore hermann pitton
2009-07-04 18:05 eric.paturage
2009-07-04 21:05 ` hermann pitton
[not found] <200907050708.n6578BL04018@neptune.localwarp.net>
2009-07-05 23:03 ` hermann pitton
2009-07-06 21:47 eric.paturage
2009-07-06 22:48 ` hermann pitton
2009-07-07 6:44 eric.paturage
2009-07-07 20:45 ` hermann pitton
2009-07-07 23:18 ` Michael Krufky
2009-07-07 23:41 ` hermann pitton
2009-07-08 6:38 ` hermann pitton
2009-07-08 19:07 eric.paturage
2009-07-09 17:46 ` hermann pitton
2009-07-10 5:50 eric.paturage
2009-07-11 0:40 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907041316.n64DGiQ04366@neptune.localwarp.net \
--to=eric.paturage@orange.fr \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.