[ 0.000000] Linux version 2.6.31-rc5-tip-00896-g6efa9e9-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #718 SMP PREEMPT Tue Aug 4 11:30:30 CEST 2009 [ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] 0000000000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000043fff] [ 0.000000] bootmap [0000000000044000 - 000000000004bfff] pages 8 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0007cd4058] TEXT DATA BSS ==> [0001000000 - 0007cd4058] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0007cd5000 - 0007cd5149] BRK ==> [0007cd5000 - 0007cd5149] [ 0.000000] #5 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] mpc: f1400-f152c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] DMA zone: 104 pages used for memmap [ 0.000000] DMA zone: 611 pages reserved [ 0.000000] DMA zone: 3268 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6552 pages used for memmap [ 0.000000] DMA32 zone: 251480 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: f1400-f152c [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is PCI [ 0.000000] Bus #6 is ISA [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 480 pages at ffff880007cee000, static data 1942408 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 254748 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] debug: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 903748k/1048512k available (15689k kernel code, 452k absent, 144312k reserved, 9369k data, 3384k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.391 MHz processor. [ 0.000035] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [ttyS0] enabled, bootconsole disabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000999] ... CLASSHASH_SIZE: 4096 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000999] ... CHAINHASH_SIZE: 16384 [ 0.000999] memory used by lock dependency info: 6367 kB [ 0.000999] per task-struct memory footprint: 2688 bytes [ 0.000999] ODEBUG: 11 of 11 active objects replaced [ 0.000999] ODEBUG: selftest passed [ 0.001040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.78 BogoMIPS (lpj=2010391) [ 0.004503] Security Framework initialized [ 0.005013] SELinux: Disabled at boot. [ 0.007294] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009469] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010487] Mount-cache hash table entries: 256 [ 0.013668] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.014008] CPU: L2 Cache: 512K (64 bytes/line) [ 0.015009] CPU 0/0x0 -> Node 0 [ 0.016006] tseg: 0000000000 [ 0.017030] CPU: Physical Processor ID: 0 [ 0.018005] CPU: Processor Core ID: 0 [ 0.019007] mce: CPU supports 5 MCE banks [ 0.020024] Performance Counters: AMD PMU driver. [ 0.022015] ... version: 0 [ 0.023005] ... bit width: 48 [ 0.024004] ... generic counters: 4 [ 0.025004] ... value mask: 0000ffffffffffff [ 0.026004] ... max period: 00007fffffffffff [ 0.027004] ... fixed-purpose counters: 0 [ 0.028003] ... counter mask: 000000000000000f [ 0.031192] debug: unmapping init memory ffffffff8287c000..ffffffff8288f000 [ 0.032473] Setting APIC routing to flat [ 0.033008] enabled ExtINT on CPU#0 [ 0.034067] ExtINT not setup in hardware but reported by MP table [ 0.035116] ENABLING IO-APIC IRQs [ 0.036003] init IO_APIC IRQs [ 0.037002] 2-0 (apicid-pin) not connected [ 0.039051] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.040022] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.041018] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 0.041993] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.041993] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.041993] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.041993] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.041993] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.041993] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.041993] ..... (found apic 0 pin 0) ... [ 0.052859] ....... works. [ 0.052998] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.055998] Using local APIC timer interrupts. [ 0.056000] calibrating APIC timer ... [ 0.057991] ... lapic delta = 1256253 [ 0.057991] ..... delta 1256253 [ 0.057991] ..... mult: 53963858 [ 0.057991] ..... calibration result: 201000 [ 0.057991] ..... CPU clock speed is 2010.0004 MHz. [ 0.057991] ..... host bus clock speed is 201.0000 MHz. [ 0.057991] ... verify APIC timer [ 0.160718] ... jiffies delta = 100 [ 0.160981] ... jiffies result ok [ 0.162008] calling migration_init+0x0/0x7b @ 1 [ 0.163326] initcall migration_init+0x0/0x7b returned 0 after 0 usecs [ 0.163983] calling spawn_ksoftirqd+0x0/0x7b @ 1 [ 0.165143] initcall spawn_ksoftirqd+0x0/0x7b returned 0 after 0 usecs [ 0.165983] calling init_call_single_data+0x0/0xd4 @ 1 [ 0.166989] initcall init_call_single_data+0x0/0xd4 returned 0 after 0 usecs [ 0.167982] calling spawn_softlockup_task+0x0/0x97 @ 1 [ 0.169086] initcall spawn_softlockup_task+0x0/0x97 returned 0 after 0 usecs [ 0.169982] calling relay_init+0x0/0x2d @ 1 [ 0.170981] initcall relay_init+0x0/0x2d returned 0 after 0 usecs [ 0.171993] calling tracer_alloc_buffers+0x0/0x2b5 @ 1 [ 0.173252] Testing tracer nop: PASSED [ 0.174989] initcall tracer_alloc_buffers+0x0/0x2b5 returned 0 after 1952 usecs [ 0.175981] calling init_trace_printk+0x0/0x2d @ 1 [ 0.176980] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs [ 0.177980] calling trace_workqueue_early_init+0x0/0x164 @ 1 [ 0.180002] initcall trace_workqueue_early_init+0x0/0x164 returned 0 after 976 usecs [ 0.183070] lockdep: fixing up alternatives. [ 0.184170] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009954) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 5 MCE banks [ 0.256043] CPU1: [ 0.255973] ------------[ cut here ]------------ [ 0.255982] WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x45/0x100() [ 0.255986] Hardware name: System Product Name [ 0.255990] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 0.255994] Call Trace: [ 0.255996] [] ? __rcu_process_callbacks+0x45/0x100 [ 0.256007] [] warn_slowpath_common+0x88/0xcb [ 0.256014] [] ? scheduler_tick+0x123/0x26c [ 0.256019] [] warn_slowpath_null+0x27/0x3d [ 0.256024] [] __rcu_process_callbacks+0x45/0x100 [ 0.256029] [] rcu_process_callbacks+0x4c/0x88 [ 0.256036] [] __do_softirq+0x14d/0x25b [ 0.256042] [] call_softirq+0x1c/0x30 [ 0.256048] [] do_softirq+0x5e/0xcf [ 0.256053] [] irq_exit+0x5d/0xc5 [ 0.256059] [] smp_apic_timer_interrupt+0x9e/0xc2 [ 0.256064] [] apic_timer_interrupt+0x13/0x20 [ 0.256067] [] ? native_safe_halt+0xb/0xd [ 0.256077] [] ? native_safe_halt+0x9/0xd [ 0.256082] [] ? default_idle+0x55/0x94 [ 0.256087] [] ? enter_idle+0x38/0x4e [ 0.256092] [] ? cpu_idle+0xc3/0x11f [ 0.256098] [] ? start_secondary+0xcb/0xe6 [ 0.256129] ---[ end trace 93d72a36b9146f22 ]--- [ 0.256968] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.259001] Brought up 2 CPUs [ 0.259968] Total of 2 processors activated (8040.69 BogoMIPS). [ 0.262319] CPU0 attaching sched-domain: [ 0.262972] domain 0: span 0-1 level MC [ 0.264966] groups: 0 1 [ 0.266967] CPU1 attaching sched-domain: [ 0.267970] domain 0: span 0-1 level MC [ 0.269965] groups: 1 0 [ 0.272857] khelper used greatest stack depth: 4720 bytes left [ 0.280843] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1 [ 0.280973] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs [ 0.281965] calling net_ns_init+0x0/0x11b @ 1 [ 0.283015] initcall net_ns_init+0x0/0x11b returned 0 after 0 usecs [ 0.284041] calling cpufreq_tsc+0x0/0x28 @ 1 [ 0.284964] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs [ 0.285963] calling pci_reboot_init+0x0/0x3b @ 1 [ 0.286964] initcall pci_reboot_init+0x0/0x3b returned 0 after 0 usecs [ 0.288012] calling print_banner+0x0/0xe @ 1 [ 0.288962] Booting paravirtualized kernel on bare hardware [ 0.289963] initcall print_banner+0x0/0xe returned 0 after 976 usecs [ 0.290963] calling init_smp_flush+0x0/0x68 @ 1 [ 0.292012] initcall init_smp_flush+0x0/0x68 returned 0 after 0 usecs [ 0.292962] calling sysctl_init+0x0/0x3d @ 1 [ 0.293969] initcall sysctl_init+0x0/0x3d returned 0 after 0 usecs [ 0.294962] calling ksysfs_init+0x0/0xe4 @ 1 [ 0.296198] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs [ 0.297032] calling async_init+0x0/0x69 @ 1 [ 0.297961] initcall async_init+0x0/0x69 returned 0 after 0 usecs [ 0.298961] calling init_jiffies_clocksource+0x0/0x39 @ 1 [ 0.300013] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs [ 0.301963] calling init_hw_breakpoint+0x0/0x39 @ 1 [ 0.302964] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs [ 0.303960] calling filelock_init+0x0/0x55 @ 1 [ 0.305054] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs [ 0.305960] calling init_script_binfmt+0x0/0x3b @ 1 [ 0.306981] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.307959] calling init_elf_binfmt+0x0/0x3b @ 1 [ 0.309009] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.309959] calling init_compat_elf_binfmt+0x0/0x3b @ 1 [ 0.310960] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs [ 0.311960] calling debugfs_init+0x0/0x80 @ 1 [ 0.313020] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs [ 0.313959] calling securityfs_init+0x0/0x77 @ 1 [ 0.314970] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs [ 0.315959] calling random32_init+0x0/0xff @ 1 [ 0.317027] initcall random32_init+0x0/0xff returned 0 after 0 usecs [ 0.318000] calling gnttab_init+0x0/0x1a8 @ 1 [ 0.319004] initcall gnttab_init+0x0/0x1a8 returned -19 after 0 usecs [ 0.320006] calling cpufreq_core_init+0x0/0xaa @ 1 [ 0.321056] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs [ 0.322006] calling cpuidle_init+0x0/0x66 @ 1 [ 0.323024] initcall cpuidle_init+0x0/0x66 returned 0 after 0 usecs [ 0.324007] calling sock_init+0x0/0x80 @ 1 [ 0.326336] initcall sock_init+0x0/0x80 returned 0 after 976 usecs [ 0.327008] calling netpoll_init+0x0/0x69 @ 1 [ 0.328008] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs [ 0.329056] calling netlink_proto_init+0x0/0x169 @ 1 [ 0.330110] NET: Registered protocol family 16 [ 0.332072] initcall netlink_proto_init+0x0/0x169 returned 0 after 1953 usecs [ 0.333056] calling bdi_class_init+0x0/0x68 @ 1 [ 0.335579] initcall bdi_class_init+0x0/0x68 returned 0 after 976 usecs [ 0.336063] calling kobject_uevent_init+0x0/0x7b @ 1 [ 0.337032] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs [ 0.338007] calling pcibus_class_init+0x0/0x40 @ 1 [ 0.339149] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.340124] calling pci_driver_init+0x0/0x39 @ 1 [ 0.342079] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs [ 0.343083] calling lcd_class_init+0x0/0x74 @ 1 [ 0.344080] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs [ 0.345061] calling backlight_class_init+0x0/0x84 @ 1 [ 0.346248] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs [ 0.347057] calling video_output_class_init+0x0/0x40 @ 1 [ 0.348078] initcall video_output_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.349012] calling xenbus_probe_init+0x0/0xe4 @ 1 [ 0.350007] initcall xenbus_probe_init+0x0/0xe4 returned -19 after 0 usecs [ 0.351007] calling tty_class_init+0x0/0x58 @ 1 [ 0.352092] initcall tty_class_init+0x0/0x58 returned 0 after 0 usecs [ 0.353063] calling vtconsole_class_init+0x0/0xe8 @ 1 [ 0.354193] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 0 usecs [ 0.355063] calling register_node_type+0x0/0xa4 @ 1 [ 0.357121] initcall register_node_type+0x0/0xa4 returned 0 after 976 usecs [ 0.358084] calling spi_init+0x0/0xd4 @ 1 [ 0.359125] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs [ 0.360060] calling i2c_init+0x0/0x8c @ 1 [ 0.362140] i2c-core: driver [dummy] registered [ 0.363119] initcall i2c_init+0x0/0x8c returned 0 after 1953 usecs [ 0.364008] calling amd_postcore_init+0x0/0xa3 @ 1 [ 0.365010] node 0 link 0: io port [1000, fffff] [ 0.366007] TOM: 0000000040000000 aka 1024M [ 0.367007] node 0 link 0: mmio [e0000000, efffffff] [ 0.368197] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.369197] node 0 link 0: mmio [a0000, bffff] [ 0.371060] node 0 link 0: mmio [40000000, fed3ffff] [ 0.373006] bus: [00,ff] on node 0 link 0 [ 0.374006] bus: 00 index 0 io port: [0, ffff] [ 0.375054] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.376006] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 0.377006] bus: 00 index 3 mmio: [a0000, bffff] [ 0.378007] initcall amd_postcore_init+0x0/0xa3 returned 0 after 12695 usecs [ 0.379056] calling arch_kdebugfs_init+0x0/0x55 @ 1 [ 0.380111] initcall arch_kdebugfs_init+0x0/0x55 returned 0 after 0 usecs [ 0.381007] calling dmi_id_init+0x0/0xf7 @ 1 [ 0.382297] initcall dmi_id_init+0x0/0xf7 returned 0 after 0 usecs [ 0.383157] calling pci_arch_init+0x0/0x67 @ 1 [ 0.384012] PCI: Using configuration type 1 for base access [ 0.385014] initcall pci_arch_init+0x0/0x67 returned 0 after 976 usecs [ 0.386007] calling topology_init+0x0/0xe0 @ 1 [ 0.388208] initcall topology_init+0x0/0xe0 returned 0 after 976 usecs [ 0.390019] calling param_sysfs_init+0x0/0xf6 @ 1 [ 0.599249] initcall param_sysfs_init+0x0/0xf6 returned 0 after 203125 usecs [ 0.600150] calling audit_watch_init+0x0/0x46 @ 1 [ 0.601031] audit: cannot initialize inotify handle [ 0.602007] initcall audit_watch_init+0x0/0x46 returned 0 after 976 usecs [ 0.603007] calling init_slow_work+0x0/0x5f @ 1 [ 0.604056] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs [ 0.605007] calling default_bdi_init+0x0/0x5e @ 1 [ 0.606197] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs [ 0.607173] calling init_bio+0x0/0x100 @ 1 [ 0.609193] bio: create slab at 0 [ 0.610106] initcall init_bio+0x0/0x100 returned 0 after 1953 usecs [ 0.611057] calling fsnotify_init+0x0/0x39 @ 1 [ 0.612011] initcall fsnotify_init+0x0/0x39 returned 0 after 0 usecs [ 0.613007] calling fsnotify_notification_init+0x0/0x129 @ 1 [ 0.614087] initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs [ 0.616010] calling cryptomgr_init+0x0/0x39 @ 1 [ 0.617008] initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs [ 0.618008] calling blk_settings_init+0x0/0x51 @ 1 [ 0.619056] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs [ 0.620007] calling blk_ioc_init+0x0/0x51 @ 1 [ 0.621091] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs [ 0.622008] calling blk_softirq_init+0x0/0x8f @ 1 [ 0.623056] initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs [ 0.624007] calling genhd_device_init+0x0/0x8c @ 1 [ 0.626382] initcall genhd_device_init+0x0/0x8c returned 0 after 976 usecs [ 0.627178] calling pci_slot_init+0x0/0x73 @ 1 [ 0.629023] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs [ 0.630008] calling fbmem_init+0x0/0xb8 @ 1 [ 0.632106] initcall fbmem_init+0x0/0xb8 returned 0 after 976 usecs [ 0.633094] calling setup_shutdown_event+0x0/0x3b @ 1 [ 0.634008] initcall setup_shutdown_event+0x0/0x3b returned 0 after 0 usecs [ 0.635007] calling misc_init+0x0/0xd6 @ 1 [ 0.637145] initcall misc_init+0x0/0xd6 returned 0 after 976 usecs [ 0.638060] calling cn_init+0x0/0x11a @ 1 [ 0.639097] initcall cn_init+0x0/0x11a returned 0 after 0 usecs [ 0.640008] calling tifm_init+0x0/0xab @ 1 [ 0.642345] initcall tifm_init+0x0/0xab returned 0 after 976 usecs [ 0.643065] calling wm8400_module_init+0x0/0x59 @ 1 [ 0.645160] i2c-core: driver [WM8400] registered [ 0.646085] initcall wm8400_module_init+0x0/0x59 returned 0 after 1953 usecs [ 0.647007] calling twl4030_init+0x0/0x3b @ 1 [ 0.648139] i2c-core: driver [twl4030] registered [ 0.649062] initcall twl4030_init+0x0/0x3b returned 0 after 976 usecs [ 0.650007] calling pcf50633_init+0x0/0x3b @ 1 [ 0.651208] i2c-core: driver [pcf50633] registered [ 0.652060] initcall pcf50633_init+0x0/0x3b returned 0 after 976 usecs [ 0.653007] calling ab3100_i2c_init+0x0/0x3b @ 1 [ 0.655219] i2c-core: driver [ab3100] registered [ 0.656010] initcall ab3100_i2c_init+0x0/0x3b returned 0 after 1953 usecs [ 0.657007] calling init_scsi+0x0/0xb7 @ 1 [ 0.660290] SCSI subsystem initialized [ 0.661068] initcall init_scsi+0x0/0xb7 returned 0 after 2929 usecs [ 0.663009] calling ata_init+0x0/0xb4 @ 1 [ 0.664492] libata version 3.00 loaded. [ 0.665181] initcall ata_init+0x0/0xb4 returned 0 after 976 usecs [ 0.666007] calling phy_init+0x0/0x57 @ 1 [ 0.668298] initcall phy_init+0x0/0x57 returned 0 after 976 usecs [ 0.669069] calling init_pcmcia_cs+0x0/0x56 @ 1 [ 0.670112] initcall init_pcmcia_cs+0x0/0x56 returned 0 after 0 usecs [ 0.671124] calling nop_usb_xceiv_init+0x0/0x39 @ 1 [ 0.672121] initcall nop_usb_xceiv_init+0x0/0x39 returned 0 after 0 usecs [ 0.673085] calling usb_init+0x0/0x199 @ 1 [ 0.675302] usbcore: registered new interface driver usbfs [ 0.677247] usbcore: registered new interface driver hub [ 0.679198] usbcore: registered new device driver usb [ 0.680061] initcall usb_init+0x0/0x199 returned 0 after 5859 usecs [ 0.681007] calling serio_init+0x0/0xb2 @ 1 [ 0.682138] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs [ 0.683060] calling gameport_init+0x0/0xb2 @ 1 [ 0.684148] initcall gameport_init+0x0/0xb2 returned 0 after 0 usecs [ 0.685013] calling input_init+0x0/0x15d @ 1 [ 0.686084] initcall input_init+0x0/0x15d returned 0 after 0 usecs [ 0.687010] calling rtc_init+0x0/0x98 @ 1 [ 0.689068] initcall rtc_init+0x0/0x98 returned 0 after 976 usecs [ 0.690010] calling pps_init+0x0/0xd7 @ 1 [ 0.691226] LinuxPPS API ver. 1 registered [ 0.692008] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.693008] initcall pps_init+0x0/0xd7 returned 0 after 1953 usecs [ 0.694007] calling power_supply_class_init+0x0/0x5f @ 1 [ 0.696094] initcall power_supply_class_init+0x0/0x5f returned 0 after 976 usecs [ 0.697007] calling hwmon_init+0x0/0x6e @ 1 [ 0.699113] initcall hwmon_init+0x0/0x6e returned 0 after 976 usecs [ 0.700007] calling md_init+0x0/0xf7 @ 1 [ 0.701037] initcall md_init+0x0/0xf7 returned 0 after 0 usecs [ 0.702007] calling leds_init+0x0/0x67 @ 1 [ 0.703264] initcall leds_init+0x0/0x67 returned 0 after 0 usecs [ 0.704010] calling pci_subsys_init+0x0/0x136 @ 1 [ 0.705005] PCI: Probing PCI hardware [ 0.706069] PCI: Probing PCI hardware (bus 00) [ 0.708297] PCI: Scanning bus 0000:00 [ 0.710085] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00 [ 0.711096] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.712106] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00 [ 0.714052] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xec [ 0.715006] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.716007] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.717093] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00 [ 0.718032] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.719035] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.720014] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.721067] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.722029] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.723010] pci 0000:00:01.1: PME# disabled [ 0.724069] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00 [ 0.725082] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff] [ 0.726053] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.727029] pci 0000:00:02.0: supports D1 D2 [ 0.728006] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.730011] pci 0000:00:02.0: PME# disabled [ 0.731047] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00 [ 0.732040] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.734055] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.735040] pci 0000:00:02.1: supports D1 D2 [ 0.736007] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.737058] pci 0000:00:02.1: PME# disabled [ 0.739054] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00 [ 0.740032] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff] [ 0.741062] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff] [ 0.742014] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff] [ 0.743040] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.744029] pci 0000:00:04.0: supports D1 D2 [ 0.745095] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00 [ 0.746058] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.747028] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.749086] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01 [ 0.750034] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.751044] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00 [ 0.752032] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff] [ 0.753064] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007] [ 0.754046] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.755029] pci 0000:00:0a.0: supports D1 D2 [ 0.756006] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.757058] pci 0000:00:0a.0: PME# disabled [ 0.758098] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01 [ 0.759048] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.760049] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761058] pci 0000:00:0b.0: PME# disabled [ 0.763056] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01 [ 0.764047] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.765097] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.766010] pci 0000:00:0c.0: PME# disabled [ 0.767062] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01 [ 0.768047] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.769098] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.770010] pci 0000:00:0d.0: PME# disabled [ 0.771062] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01 [ 0.772047] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.773096] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.774010] pci 0000:00:0e.0: PME# disabled [ 0.775090] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 [ 0.776059] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.777104] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 [ 0.778059] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.779037] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 [ 0.780059] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd [ 0.781085] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 [ 0.782061] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd [ 0.783062] PCI: Fixups for bus 0000:00 [ 0.784009] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0 [ 0.785073] PCI: Scanning bus 0000:05 [ 0.786065] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00 [ 0.787036] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff] [ 0.788015] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff] [ 0.789102] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.790032] pci 0000:05:07.0: supports D1 D2 [ 0.791006] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 0.792010] pci 0000:05:07.0: PME# disabled [ 0.793169] PCI: Fixups for bus 0000:05 [ 0.794006] pci 0000:00:09.0: transparent bridge [ 0.795010] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff] [ 0.796010] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff] [ 0.797058] PCI: Bus scan for 0000:05 returning with max=05 [ 0.798011] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0 [ 0.799024] PCI: Scanning bus 0000:04 [ 0.801152] PCI: Fixups for bus 0000:04 [ 0.803025] PCI: Bus scan for 0000:04 returning with max=04 [ 0.804011] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0 [ 0.805072] PCI: Scanning bus 0000:03 [ 0.806143] PCI: Fixups for bus 0000:03 [ 0.807024] PCI: Bus scan for 0000:03 returning with max=03 [ 0.808011] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0 [ 0.809072] PCI: Scanning bus 0000:02 [ 0.810142] PCI: Fixups for bus 0000:02 [ 0.811023] PCI: Bus scan for 0000:02 returning with max=02 [ 0.812011] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0 [ 0.813072] PCI: Scanning bus 0000:01 [ 0.814038] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00 [ 0.815019] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47 [ 0.816019] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.817063] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff] [ 0.818015] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff] [ 0.820020] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.821060] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd [ 0.822043] pci 0000:01:00.0: supports D1 D2 [ 0.823057] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00 [ 0.824019] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47 [ 0.825065] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff] [ 0.826060] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd [ 0.827039] pci 0000:01:00.1: supports D1 D2 [ 0.828119] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.829272] PCI: Fixups for bus 0000:01 [ 0.830014] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff] [ 0.831010] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.832014] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.833054] PCI: Bus scan for 0000:01 returning with max=01 [ 0.834011] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1 [ 0.835013] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1 [ 0.836013] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1 [ 0.837061] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1 [ 0.838013] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1 [ 0.839011] PCI: Bus scan for 0000:00 returning with max=05 [ 0.852354] pci 0000:00:00.0: default IRQ router [10de:005e] [ 0.853584] initcall pci_subsys_init+0x0/0x136 returned 0 after 144531 usecs [ 0.854008] calling proto_init+0x0/0x39 @ 1 [ 0.855027] initcall proto_init+0x0/0x39 returned 0 after 0 usecs [ 0.856056] calling net_dev_init+0x0/0x1c2 @ 1 [ 0.859245] initcall net_dev_init+0x0/0x1c2 returned 0 after 1953 usecs [ 0.860008] calling neigh_init+0x0/0x98 @ 1 [ 0.861009] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs [ 0.862008] calling fib_rules_init+0x0/0xcc @ 1 [ 0.863061] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs [ 0.864007] calling genl_init+0x0/0x100 @ 1 [ 0.867139] initcall genl_init+0x0/0x100 returned 0 after 1953 usecs [ 0.868015] calling cipso_v4_init+0x0/0xae @ 1 [ 0.869032] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs [ 0.870008] calling irda_init+0x0/0xb8 @ 1 [ 0.871104] NET: Registered protocol family 23 [ 0.872204] initcall irda_init+0x0/0xb8 returned 0 after 976 usecs [ 0.873008] calling bt_init+0x0/0x81 @ 1 [ 0.874006] Bluetooth: Core ver 2.15 [ 0.875163] NET: Registered protocol family 31 [ 0.876057] Bluetooth: HCI device and connection manager initialized [ 0.877040] Bluetooth: HCI socket layer initialized [ 0.878008] initcall bt_init+0x0/0x81 returned 0 after 3906 usecs [ 0.879008] calling wireless_nlevent_init+0x0/0x69 @ 1 [ 0.880064] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs [ 0.881008] calling cfg80211_init+0x0/0x9f @ 1 [ 0.887211] cfg80211: Using static regulatory domain info [ 0.888057] cfg80211: Regulatory domain: US [ 0.889006] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.890007] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.891006] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.893008] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.894007] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.895006] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.896055] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.897137] cfg80211: Calling CRDA for country: US [ 0.898290] initcall cfg80211_init+0x0/0x9f returned 0 after 15625 usecs [ 0.899058] calling ieee80211_init+0x0/0x3b @ 1 [ 0.900042] initcall ieee80211_init+0x0/0x3b returned 0 after 0 usecs [ 0.901007] calling netlbl_init+0x0/0xa8 @ 1 [ 0.902006] NetLabel: Initializing [ 0.903053] NetLabel: domain hash size = 128 [ 0.904005] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.906030] NetLabel: unlabeled traffic allowed by default [ 0.907057] initcall netlbl_init+0x0/0xa8 returned 0 after 4882 usecs [ 0.908008] calling rfkill_init+0x0/0xb1 @ 1 [ 0.910202] initcall rfkill_init+0x0/0xb1 returned 0 after 976 usecs [ 0.911058] calling sysctl_init+0x0/0x6f @ 1 [ 0.912012] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs [ 0.913008] calling pci_iommu_init+0x0/0x39 @ 1 [ 0.914008] initcall pci_iommu_init+0x0/0x39 returned 0 after 0 usecs [ 0.915056] calling print_all_ICs+0x0/0xbf @ 1 [ 0.916006] [ 0.916007] printing PIC contents [ 0.917008] ... PIC IMR: fffa [ 0.918000] ... PIC IRR: 0001 [ 0.918005] ... PIC ISR: 0001 [ 0.919055] ... PIC ELCR: 0828 [ 0.920007] printing local APIC contents on CPU#0/0: [ 0.921000] ... APIC ID: 00000000 (0) [ 0.921000] ... APIC VERSION: 00040010 [ 0.921000] ... APIC TASKPRI: 00000000 (00) [ 0.921000] ... APIC ARBPRI: 000000e0 (e0) [ 0.921000] ... APIC PROCPRI: 00000000 [ 0.921000] ... APIC LDR: 01000000 [ 0.921000] ... APIC DFR: ffffffff [ 0.921000] ... APIC SPIV: 000001ff [ 0.921000] ... APIC ISR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC TMR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC IRR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.921000] ... APIC ESR: 00000000 [ 0.921000] ... APIC ICR: 000008fd [ 0.921000] ... APIC ICR2: 02000000 [ 0.921000] ... APIC LVTT: 000200ef [ 0.921000] ... APIC LVTPC: 00000400 [ 0.921000] ... APIC LVT0: 00010700 [ 0.921000] ... APIC LVT1: 00000400 [ 0.921000] ... APIC LVTERR: 000000fe [ 0.921000] ... APIC TMICT: 00003112 [ 0.921000] ... APIC TMCCT: 000030e3 [ 0.921000] ... APIC TDCR: 00000003 [ 0.921000] [ 0.920999] printing local APIC contents on CPU#1/1: [ 0.921000] ... APIC ID: 01000000 (1) [ 0.921000] ... APIC VERSION: 00040010 [ 0.921000] ... APIC TASKPRI: 00000000 (00) [ 0.921000] ... APIC ARBPRI: 000000e0 (e0) [ 0.921000] ... APIC PROCPRI: 00000000 [ 0.921000] ... APIC LDR: 02000000 [ 0.921000] ... APIC DFR: ffffffff [ 0.921000] ... APIC SPIV: 000001ff [ 0.921000] ... APIC ISR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC TMR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.921000] ... APIC IRR field: [ 0.921000] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.921000] ... APIC ESR: 00000000 [ 0.921000] ... APIC ICR: 000008fd [ 0.921000] ... APIC ICR2: 01000000 [ 0.921000] ... APIC LVTT: 000200ef [ 0.921000] ... APIC LVTPC: 00010400 [ 0.921000] ... APIC LVT0: 00010700 [ 0.921000] ... APIC LVT1: 00010400 [ 0.921000] ... APIC LVTERR: 000000fe [ 0.921000] ... APIC TMICT: 00003112 [ 0.921000] ... APIC TMCCT: 0000098d [ 0.921000] ... APIC TDCR: 00000003 [ 0.921000] [ 1.027898] number of MP IRQ sources: 17. [ 1.028006] number of IO-APIC #2 registers: 24. [ 1.029006] testing the IO APIC....................... [ 1.030009] [ 1.031054] IO APIC #2...... [ 1.032006] .... register #00: 00000000 [ 1.033006] ....... : physical APIC id: 00 [ 1.034006] ....... : Delivery Type: 0 [ 1.035054] ....... : LTS : 0 [ 1.036006] .... register #01: 00170011 [ 1.037006] ....... : max redirection entries: 0017 [ 1.038006] ....... : PRQ implemented: 0 [ 1.039054] ....... : IO APIC version: 0011 [ 1.040006] .... register #02: 00000000 [ 1.041006] ....... : arbitration: 00 [ 1.042006] .... IRQ redirection table: [ 1.043053] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.044009] 00 003 0 0 0 0 0 1 1 30 [ 1.046008] 01 003 0 0 0 0 0 1 1 31 [ 1.048008] 02 000 1 0 0 0 0 0 0 00 [ 1.050008] 03 003 1 1 0 1 0 1 1 33 [ 1.052008] 04 003 0 0 0 0 0 1 1 34 [ 1.054008] 05 003 1 1 0 1 0 1 1 35 [ 1.056008] 06 003 0 0 0 0 0 1 1 36 [ 1.058008] 07 003 1 0 0 0 0 1 1 37 [ 1.060008] 08 003 0 0 0 0 0 1 1 38 [ 1.062008] 09 003 0 0 0 0 0 1 1 39 [ 1.064009] 0a 003 0 0 0 0 0 1 1 3A [ 1.066008] 0b 003 1 1 0 1 0 1 1 3B [ 1.068009] 0c 003 0 0 0 0 0 1 1 3C [ 1.070008] 0d 003 0 0 0 0 0 1 1 3D [ 1.072008] 0e 003 0 0 0 0 0 1 1 3E [ 1.074008] 0f 003 0 0 0 0 0 1 1 3F [ 1.076008] 10 000 1 0 0 0 0 0 0 00 [ 1.078008] 11 000 1 0 0 0 0 0 0 00 [ 1.080008] 12 000 1 0 0 0 0 0 0 00 [ 1.082008] 13 000 1 0 0 0 0 0 0 00 [ 1.084008] 14 000 1 0 0 0 0 0 0 00 [ 1.086008] 15 000 1 0 0 0 0 0 0 00 [ 1.089008] 16 000 1 0 0 0 0 0 0 00 [ 1.091058] 17 000 1 0 0 0 0 0 0 00 [ 1.093006] IRQ to pin mappings: [ 1.094006] IRQ0 -> 0:0 [ 1.096197] IRQ1 -> 0:1 [ 1.098006] IRQ3 -> 0:3 [ 1.100197] IRQ4 -> 0:4 [ 1.102195] IRQ5 -> 0:5 [ 1.104741] IRQ6 -> 0:6 [ 1.106195] IRQ7 -> 0:7 [ 1.108791] IRQ8 -> 0:8 [ 1.110197] IRQ9 -> 0:9 [ 1.111732] IRQ10 -> 0:10 [ 1.113197] IRQ11 -> 0:11 [ 1.115006] IRQ12 -> 0:12 [ 1.116873] IRQ13 -> 0:13 [ 1.118197] IRQ14 -> 0:14 [ 1.120247] IRQ15 -> 0:15 [ 1.122356] .................................... done. [ 1.123010] initcall print_all_ICs+0x0/0xbf returned 0 after 202148 usecs [ 1.124057] calling hpet_late_init+0x0/0xa6 @ 1 [ 1.125009] initcall hpet_late_init+0x0/0xa6 returned -19 after 0 usecs [ 1.126008] calling clocksource_done_booting+0x0/0x37 @ 1 [ 1.127008] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs [ 1.128056] calling ftrace_init_debugfs+0x0/0x56 @ 1 [ 1.129115] initcall ftrace_init_debugfs+0x0/0x56 returned 0 after 0 usecs [ 1.130008] calling rb_init_debugfs+0x0/0x56 @ 1 [ 1.131023] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs [ 1.132056] calling tracer_init_debugfs+0x0/0x254 @ 1 [ 1.134729] initcall tracer_init_debugfs+0x0/0x254 returned 0 after 976 usecs [ 1.135008] calling init_trace_printk_function_export+0x0/0x56 @ 1 [ 1.136072] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs [ 1.137008] calling stat_workqueue_init+0x0/0x54 @ 1 [ 1.138077] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs [ 1.139008] calling event_trace_init+0x0/0x212 @ 1 [ 1.156079] initcall event_trace_init+0x0/0x212 returned 0 after 15625 usecs [ 1.157009] calling ksym_tracer_stat_init+0x0/0x54 @ 1 [ 1.158029] initcall ksym_tracer_stat_init+0x0/0x54 returned 0 after 0 usecs [ 1.159008] calling init_pipe_fs+0x0/0x72 @ 1 [ 1.161143] initcall init_pipe_fs+0x0/0x72 returned 0 after 976 usecs [ 1.162008] calling eventpoll_init+0x0/0x102 @ 1 [ 1.163171] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs [ 1.164057] calling anon_inode_init+0x0/0x150 @ 1 [ 1.166065] initcall anon_inode_init+0x0/0x150 returned 0 after 976 usecs [ 1.167010] calling blk_scsi_ioctl_init+0x0/0x2ad @ 1 [ 1.168057] initcall blk_scsi_ioctl_init+0x0/0x2ad returned 0 after 0 usecs [ 1.169008] calling chr_dev_init+0x0/0xca @ 1 [ 1.174288] initcall chr_dev_init+0x0/0xca returned 0 after 3906 usecs [ 1.176040] calling firmware_class_init+0x0/0x9f @ 1 [ 1.177116] initcall firmware_class_init+0x0/0x9f returned 0 after 0 usecs [ 1.178080] calling ieee1394_init+0x0/0x289 @ 1 [ 1.182193] initcall ieee1394_init+0x0/0x289 returned 0 after 2929 usecs [ 1.184056] calling cpufreq_gov_performance_init+0x0/0x39 @ 1 [ 1.185035] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs [ 1.186007] calling cpufreq_gov_userspace_init+0x0/0x39 @ 1 [ 1.187058] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs [ 1.188008] calling ssb_modinit+0x0/0x9a @ 1 [ 1.189356] initcall ssb_modinit+0x0/0x9a returned 0 after 0 usecs [ 1.190074] calling pcibios_assign_resources+0x0/0x9a @ 1 [ 1.191240] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 1.192009] pci 0000:00:09.0: IO window: 0xc000-0xcfff [ 1.193012] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff [ 1.194057] pci 0000:00:09.0: PREFETCH window: disabled [ 1.195010] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 1.196006] pci 0000:00:0b.0: IO window: disabled [ 1.197011] pci 0000:00:0b.0: MEM window: disabled [ 1.198060] pci 0000:00:0b.0: PREFETCH window: disabled [ 1.199010] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 1.200006] pci 0000:00:0c.0: IO window: disabled [ 1.201011] pci 0000:00:0c.0: MEM window: disabled [ 1.202057] pci 0000:00:0c.0: PREFETCH window: disabled [ 1.203010] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 1.204006] pci 0000:00:0d.0: IO window: disabled [ 1.205011] pci 0000:00:0d.0: MEM window: disabled [ 1.206057] pci 0000:00:0d.0: PREFETCH window: disabled [ 1.207018] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200 [ 1.208011] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 1.209008] pci 0000:00:0e.0: IO window: 0xb000-0xbfff [ 1.210060] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff [ 1.211011] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.212024] pci 0000:00:09.0: setting latency timer to 64 [ 1.213019] pci 0000:00:0b.0: setting latency timer to 64 [ 1.214067] pci 0000:00:0c.0: setting latency timer to 64 [ 1.215019] pci 0000:00:0d.0: setting latency timer to 64 [ 1.216019] pci 0000:00:0e.0: setting latency timer to 64 [ 1.217010] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.218055] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.219007] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 1.220007] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff] [ 1.221007] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.222055] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.223008] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 1.224007] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff] [ 1.225007] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 1.226056] initcall pcibios_assign_resources+0x0/0x9a returned 0 after 34179 usecs [ 1.227008] calling sysctl_core_init+0x0/0x5f @ 1 [ 1.228061] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs [ 1.229008] calling inet_init+0x0/0x1ff @ 1 [ 1.231082] NET: Registered protocol family 2 [ 1.232405] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.236560] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.241858] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) [ 1.252684] TCP: Hash tables configured (established 131072 bind 65536) [ 1.253058] TCP reno registered [ 1.255065] initcall inet_init+0x0/0x1ff returned 0 after 24414 usecs [ 1.256009] calling af_unix_init+0x0/0x7b @ 1 [ 1.258063] NET: Registered protocol family 1 [ 1.259032] initcall af_unix_init+0x0/0x7b returned 0 after 1953 usecs [ 1.260011] calling populate_rootfs+0x0/0x100 @ 1 [ 1.262658] initcall populate_rootfs+0x0/0x100 returned 0 after 976 usecs [ 1.263010] calling calgary_fixup_tce_spaces+0x0/0x121 @ 1 [ 1.264009] initcall calgary_fixup_tce_spaces+0x0/0x121 returned -19 after 0 usecs [ 1.265008] calling vmx_init+0x0/0x233 @ 1 [ 1.267457] kvm: no hardware support [ 1.268022] initcall vmx_init+0x0/0x233 returned -95 after 1953 usecs [ 1.269008] initcall vmx_init+0x0/0x233 returned with error code -95 [ 1.271009] calling svm_init+0x0/0x40 @ 1 [ 1.272527] has_svm: svm not available [ 1.273006] kvm: no hardware support [ 1.275010] initcall svm_init+0x0/0x40 returned -95 after 2929 usecs [ 1.276008] initcall svm_init+0x0/0x40 returned with error code -95 [ 1.277007] calling i8259A_init_sysfs+0x0/0x49 @ 1 [ 1.279215] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 976 usecs [ 1.280069] calling vsyscall_init+0x0/0x60 @ 1 [ 1.281021] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs [ 1.282007] calling sbf_init+0x0/0x118 @ 1 [ 1.283008] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs [ 1.284059] calling i8237A_init_sysfs+0x0/0x49 @ 1 [ 1.286111] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 976 usecs [ 1.288125] calling add_rtc_cmos+0x0/0x68 @ 1 [ 1.289166] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.290063] initcall add_rtc_cmos+0x0/0x68 returned 0 after 976 usecs [ 1.291009] calling cache_sysfs_init+0x0/0x85 @ 1 [ 1.295284] initcall cache_sysfs_init+0x0/0x85 returned 0 after 2929 usecs [ 1.296141] calling mce_init_device+0x0/0x124 @ 1 [ 1.299144] initcall mce_init_device+0x0/0x124 returned 0 after 1953 usecs [ 1.300087] calling threshold_init_device+0x0/0xc0 @ 1 [ 1.300011] Clocksource tsc unstable (delta = 1237999586 ns) [ 1.301008] initcall threshold_init_device+0x0/0xc0 returned 0 after 0 usecs [ 1.302009] calling inject_init+0x0/0x4b @ 1 [ 1.303006] Machine check injector initialized [ 1.304055] initcall inject_init+0x0/0x4b returned 0 after 976 usecs [ 1.305007] calling msr_init+0x0/0x15c @ 1 [ 1.307390] initcall msr_init+0x0/0x15c returned 0 after 976 usecs [ 1.308095] calling ioapic_init_sysfs+0x0/0xd0 @ 1 [ 1.309144] initcall ioapic_init_sysfs+0x0/0xd0 returned 0 after 0 usecs [ 1.310070] calling add_pcspkr+0x0/0x4f @ 1 [ 1.312103] initcall add_pcspkr+0x0/0x4f returned 0 after 976 usecs [ 1.313055] calling start_periodic_check_for_corruption+0x0/0x61 @ 1 [ 1.314008] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 0 usecs [ 1.315008] calling audit_classes_init+0x0/0xd6 @ 1 [ 1.316039] initcall audit_classes_init+0x0/0xd6 returned 0 after 0 usecs [ 1.317056] calling pt_dump_init+0x0/0x57 @ 1 [ 1.318030] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs [ 1.319008] calling crypto_fpu_module_init+0x0/0x39 @ 1 [ 1.320129] initcall crypto_fpu_module_init+0x0/0x39 returned 0 after 0 usecs [ 1.321056] calling aes_init+0x0/0x39 @ 1 [ 1.322207] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 1.323012] calling init+0x0/0x39 @ 1 [ 1.325111] initcall init+0x0/0x39 returned 0 after 976 usecs [ 1.326007] calling init+0x0/0x39 @ 1 [ 1.327099] initcall init+0x0/0x39 returned 0 after 0 usecs [ 1.328010] calling aesni_init+0x0/0x188 @ 1 [ 1.329006] Intel AES-NI instructions are not detected. [ 1.330008] initcall aesni_init+0x0/0x188 returned -19 after 976 usecs [ 1.331007] calling crc32c_intel_mod_init+0x0/0x47 @ 1 [ 1.332062] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs [ 1.334008] calling init_vdso_vars+0x0/0x272 @ 1 [ 1.335027] initcall init_vdso_vars+0x0/0x272 returned 0 after 0 usecs [ 1.336056] calling ia32_binfmt_init+0x0/0x3b @ 1 [ 1.337014] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs [ 1.338007] calling sysenter_setup+0x0/0xfb @ 1 [ 1.339015] initcall sysenter_setup+0x0/0xfb returned 0 after 0 usecs [ 1.340056] calling init_aout_binfmt+0x0/0x3b @ 1 [ 1.341009] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs [ 1.342007] calling init_sched_debug_procfs+0x0/0x53 @ 1 [ 1.343027] initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.345009] calling proc_schedstat_init+0x0/0x49 @ 1 [ 1.346020] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs [ 1.347008] calling proc_execdomains_init+0x0/0x49 @ 1 [ 1.348068] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs [ 1.349008] calling ioresources_init+0x0/0x63 @ 1 [ 1.350031] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs [ 1.351008] calling uid_cache_init+0x0/0xb4 @ 1 [ 1.352126] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs [ 1.353008] calling init_posix_timers+0x0/0x10e @ 1 [ 1.354055] initcall init_posix_timers+0x0/0x10e returned 0 after 0 usecs [ 1.355008] calling init_posix_cpu_timers+0x0/0x109 @ 1 [ 1.356057] initcall init_posix_cpu_timers+0x0/0x109 returned 0 after 0 usecs [ 1.357007] calling nsproxy_cache_init+0x0/0x54 @ 1 [ 1.358054] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs [ 1.359010] calling create_proc_profile+0x0/0x85 @ 1 [ 1.360057] initcall create_proc_profile+0x0/0x85 returned 0 after 0 usecs [ 1.361008] calling timekeeping_init_device+0x0/0x49 @ 1 [ 1.363208] initcall timekeeping_init_device+0x0/0x49 returned 0 after 976 usecs [ 1.364008] calling init_clocksource_sysfs+0x0/0x77 @ 1 [ 1.366195] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 976 usecs [ 1.367064] calling init_timer_list_procfs+0x0/0x53 @ 1 [ 1.368021] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.369008] calling init_tstats_procfs+0x0/0x53 @ 1 [ 1.370020] initcall init_tstats_procfs+0x0/0x53 returned 0 after 0 usecs [ 1.371062] calling lockdep_proc_init+0x0/0xa3 @ 1 [ 1.372063] initcall lockdep_proc_init+0x0/0xa3 returned 0 after 0 usecs [ 1.373008] calling futex_init+0x0/0xa9 @ 1 [ 1.374057] initcall futex_init+0x0/0xa9 returned 0 after 0 usecs [ 1.375056] calling proc_dma_init+0x0/0x49 @ 1 [ 1.376020] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs [ 1.377008] calling kallsyms_init+0x0/0x4c @ 1 [ 1.378020] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs [ 1.379056] calling crash_save_vmcoreinfo_init+0x0/0x492 @ 1 [ 1.380036] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 0 usecs [ 1.381008] calling crash_notes_memory_init+0x0/0x5f @ 1 [ 1.382015] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs [ 1.383057] calling backtrace_regression_test+0x0/0x11f @ 1 [ 1.384006] ====[ backtrace testing ]=========== [ 1.385006] Testing a backtrace from process context. [ 1.386006] The following trace is a kernel self test and not a bug! [ 1.388010] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 1.389006] Call Trace: [ 1.390011] [] ? backtrace_regression_test+0x0/0x11f [ 1.391058] [] backtrace_regression_test+0x4a/0x11f [ 1.392009] [] ? backtrace_regression_test+0x0/0x11f [ 1.393010] [] ? jiffies_read+0xd/0x3c [ 1.394009] [] ? ktime_get+0x77/0xea [ 1.395057] [] ? kallsyms_init+0x0/0x4c [ 1.396009] [] ? backtrace_regression_test+0x0/0x11f [ 1.397011] [] do_one_initcall+0x85/0x1a5 [ 1.398011] [] ? __lock_acquire+0x3e6/0x463 [ 1.399058] [] ? proc_register+0x114/0x138 [ 1.400010] [] ? put_lock_stats+0x3b/0x5a [ 1.401009] [] ? lock_release_holdtime+0xc5/0xe1 [ 1.402009] [] ? proc_register+0x114/0x138 [ 1.403057] [] ? __lock_release+0x17f/0x19f [ 1.404011] [] ? _raw_spin_unlock+0x9e/0xbb [ 1.405009] [] ? test_ti_thread_flag+0xd/0x3a [ 1.406011] [] ? _spin_unlock+0x5e/0x82 [ 1.407057] [] ? proc_register+0x114/0x138 [ 1.408009] [] ? create_proc_entry+0x92/0xbe [ 1.409011] [] ? register_irq_proc+0x12/0xf2 [ 1.410009] [] ? irq_to_desc+0xd/0x49 [ 1.411059] [] ? early_idt_handler+0x0/0x71 [ 1.412009] [] ? early_idt_handler+0x0/0x71 [ 1.413009] [] do_basic_setup+0x59/0x82 [ 1.414009] [] ? early_idt_handler+0x0/0x71 [ 1.415057] [] kernel_init+0x88/0xe2 [ 1.416009] [] ? early_idt_handler+0x0/0x71 [ 1.417011] [] child_rip+0xa/0x20 [ 1.418010] [] ? restore_args+0x0/0x30 [ 1.419057] [] ? kernel_init+0x0/0xe2 [ 1.420009] [] ? child_rip+0x0/0x20 [ 1.421006] Testing a backtrace from irq context. [ 1.422006] The following trace is a kernel self test and not a bug! [ 1.423065] Pid: 4, comm: ksoftirqd/0 Tainted: G W 2.6.31-rc5-tip-00896-g6efa9e9-dirty #718 [ 1.424003] Call Trace: [ 1.425003] [] backtrace_test_irq_callback+0x21/0x43 [ 1.427008] [] tasklet_action+0xd1/0x160 [ 1.428006] [] __do_softirq+0x14d/0x25b [ 1.429006] [] call_softirq+0x1c/0x30 [ 1.430003] [] do_softirq+0x5e/0xcf [ 1.432006] [] ksoftirqd+0xa8/0x19d [ 1.433006] [] ? complete+0x57/0x76 [ 1.434006] [] ? ksoftirqd+0x0/0x19d [ 1.435007] [] kthread+0x96/0x9e [ 1.436006] [] child_rip+0xa/0x20 [ 1.437006] [] ? restore_args+0x0/0x30 [ 1.438006] [] ? kthread+0x0/0x9e [ 1.439006] [] ? child_rip+0x0/0x20 [ 1.440016] Testing a saved backtrace. [ 1.441006] The following trace is a kernel self test and not a bug! [ 1.442010] [] save_stack_trace+0x3e/0x73 [ 1.444060] [] backtrace_regression_test+0xe8/0x11f [ 1.446006] [] do_one_initcall+0x85/0x1a5 [ 1.448054] [] do_basic_setup+0x59/0x82 [ 1.450006] [] kernel_init+0x88/0xe2 [ 1.452054] [] child_rip+0xa/0x20 [ 1.454006] [] 0xffffffffffffffff [ 1.456054] ====[ end of backtrace testing ]==== [ 1.457009] initcall backtrace_regression_test+0x0/0x11f returned 0 after 71289 usecs [ 1.458008] calling pid_namespaces_init+0x0/0x54 @ 1 [ 1.459102] initcall pid_namespaces_init+0x0/0x54 returned 0 after 0 usecs [ 1.460057] calling audit_init+0x0/0x17a @ 1 [ 1.461007] audit: initializing netlink socket (disabled) [ 1.462129] type=2000 audit(1249399790.462:1): initialized [ 1.463021] initcall audit_init+0x0/0x17a returned 0 after 1953 usecs [ 1.464056] calling hung_task_init+0x0/0x79 @ 1 [ 1.465116] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs [ 1.466010] calling rcuclassic_trace_init+0x0/0x17d @ 1 [ 1.467099] initcall rcuclassic_trace_init+0x0/0x17d returned 0 after 0 usecs [ 1.468008] calling utsname_sysctl_init+0x0/0x3b @ 1 [ 1.469014] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 1.470064] calling init_lstats_procfs+0x0/0x4c @ 1 [ 1.471024] initcall init_lstats_procfs+0x0/0x4c returned 0 after 0 usecs [ 1.472008] calling ftrace_nodyn_init+0x0/0x37 @ 1 [ 1.473008] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs [ 1.474056] calling init_events+0x0/0x8c @ 1 [ 1.475029] initcall init_events+0x0/0x8c returned 0 after 0 usecs [ 1.476008] calling init_sched_switch_trace+0x0/0x39 @ 1 [ 1.477016] Testing tracer sched_switch: PASSED [ 1.580957] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 100586 usecs [ 1.581009] calling init_stack_trace+0x0/0x39 @ 1 [ 1.582010] Testing tracer sysprof: .. no entries found ..FAILED! [ 1.686807] initcall init_stack_trace+0x0/0x39 returned -1 after 101562 usecs [ 1.688010] initcall init_stack_trace+0x0/0x39 returned with error code -1 [ 1.690009] calling init_function_trace+0x0/0x39 @ 1 [ 1.691010] Testing tracer function: PASSED [ 1.796011] initcall init_function_trace+0x0/0x39 returned 0 after 102539 usecs [ 1.797008] calling init_irqsoff_tracer+0x0/0x53 @ 1 [ 1.798010] Testing tracer irqsoff: PASSED [ 1.801011] Testing tracer preemptoff: PASSED [ 1.803063] Testing tracer preemptirqsoff: PASSED [ 1.805010] initcall init_irqsoff_tracer+0x0/0x53 returned 0 after 6835 usecs [ 1.806008] calling init_graph_trace+0x0/0x39 @ 1 [ 1.807010] Testing tracer function_graph: PASSED [ 1.911012] initcall init_graph_trace+0x0/0x39 returned 0 after 101562 usecs [ 1.912010] calling init_power_trace+0x0/0x39 @ 1 [ 1.913011] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs [ 1.914056] calling init_kmem_tracer+0x0/0x7d @ 1 [ 1.915014] Warning: could not register the kmem tracer [ 1.916008] initcall init_kmem_tracer+0x0/0x7d returned 1 after 976 usecs [ 1.917008] initcall init_kmem_tracer+0x0/0x7d returned with error code 1 [ 1.918056] calling init_blk_tracer+0x0/0x7e @ 1 [ 1.919016] initcall init_blk_tracer+0x0/0x7e returned 0 after 0 usecs [ 1.920056] calling register_ftrace_syscalls+0x0/0xc5 @ 1 [ 1.921016] initcall register_ftrace_syscalls+0x0/0xc5 returned 0 after 0 usecs [ 1.922008] calling init_ksym_trace+0x0/0x76 @ 1 [ 1.923031] Testing tracer ksym_tracer: PASSED [ 1.939777] initcall init_ksym_trace+0x0/0x76 returned 0 after 15625 usecs [ 1.940009] calling perf_counter_sysfs_init+0x0/0x40 @ 1 [ 1.941036] initcall perf_counter_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 1.942009] calling init_per_zone_wmark_min+0x0/0x8d @ 1 [ 1.943138] initcall init_per_zone_wmark_min+0x0/0x8d returned 0 after 0 usecs [ 1.944008] calling pdflush_init+0x0/0x43 @ 1 [ 1.945129] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs [ 1.946010] calling kswapd_init+0x0/0x97 @ 1 [ 1.947170] initcall kswapd_init+0x0/0x97 returned 0 after 0 usecs [ 1.948009] calling init_tmpfs+0x0/0x64 @ 1 [ 1.949196] initcall init_tmpfs+0x0/0x64 returned 0 after 0 usecs [ 1.950009] calling setup_vmstat+0x0/0xef @ 1 [ 1.951077] initcall setup_vmstat+0x0/0xef returned 0 after 0 usecs [ 1.952009] calling mm_sysfs_init+0x0/0x50 @ 1 [ 1.953023] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs [ 1.954008] calling proc_vmalloc_init+0x0/0x4c @ 1 [ 1.956023] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs [ 1.957009] calling procswaps_init+0x0/0x49 @ 1 [ 1.958021] initcall procswaps_init+0x0/0x49 returned 0 after 0 usecs [ 1.959009] calling hugetlb_init+0x0/0x230 @ 1 [ 1.960012] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.961051] initcall hugetlb_init+0x0/0x230 returned 0 after 976 usecs [ 1.962008] calling slab_proc_init+0x0/0x4c @ 1 [ 1.963022] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs [ 1.964008] calling slab_sysfs_init+0x0/0x11b @ 1 [ 2.017158] initcall slab_sysfs_init+0x0/0x11b returned 0 after 50781 usecs [ 2.018144] calling fasync_init+0x0/0x51 @ 1 [ 2.020050] initcall fasync_init+0x0/0x51 returned 0 after 976 usecs [ 2.021071] calling proc_filesystems_init+0x0/0x49 @ 1 [ 2.022029] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs [ 2.023008] calling dnotify_init+0x0/0xa7 @ 1 [ 2.025493] initcall dnotify_init+0x0/0xa7 returned 0 after 976 usecs [ 2.026058] calling aio_setup+0x0/0x9c @ 1 [ 2.030168] initcall aio_setup+0x0/0x9c returned 0 after 2929 usecs [ 2.031058] calling proc_locks_init+0x0/0x49 @ 1 [ 2.032027] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs [ 2.033008] calling init_sys32_ioctl+0x0/0xac @ 1 [ 2.034024] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs [ 2.035056] calling init_mbcache+0x0/0x3b @ 1 [ 2.036012] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs [ 2.037008] calling dquot_init+0x0/0x12a @ 1 [ 2.038007] VFS: Disk quotas dquot_6.5.2 [ 2.040068] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.041067] initcall dquot_init+0x0/0x12a returned 0 after 2929 usecs [ 2.042008] calling init_v1_quota_format+0x0/0x39 @ 1 [ 2.043010] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs [ 2.044056] calling init_v2_quota_format+0x0/0x39 @ 1 [ 2.045009] initcall init_v2_quota_format+0x0/0x39 returned 0 after 0 usecs [ 2.046008] calling proc_cmdline_init+0x0/0x49 @ 1 [ 2.047023] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs [ 2.048057] calling proc_cpuinfo_init+0x0/0x49 @ 1 [ 2.049021] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs [ 2.050008] calling proc_devices_init+0x0/0x49 @ 1 [ 2.051021] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs [ 2.052057] calling proc_interrupts_init+0x0/0x49 @ 1 [ 2.053021] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs [ 2.054008] calling proc_loadavg_init+0x0/0x49 @ 1 [ 2.055021] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs [ 2.057009] calling proc_meminfo_init+0x0/0x49 @ 1 [ 2.058021] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs [ 2.059009] calling proc_stat_init+0x0/0x49 @ 1 [ 2.060069] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs [ 2.061008] calling proc_uptime_init+0x0/0x49 @ 1 [ 2.062021] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs [ 2.063009] calling proc_version_init+0x0/0x49 @ 1 [ 2.064069] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs [ 2.065008] calling proc_softirqs_init+0x0/0x49 @ 1 [ 2.066021] initcall proc_softirqs_init+0x0/0x49 returned 0 after 0 usecs [ 2.067009] calling proc_kmsg_init+0x0/0x4c @ 1 [ 2.068081] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs [ 2.069008] calling proc_page_init+0x0/0x69 @ 1 [ 2.070033] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs [ 2.071008] calling configfs_init+0x0/0xfb @ 1 [ 2.073125] initcall configfs_init+0x0/0xfb returned 0 after 976 usecs [ 2.074014] calling init_devpts_fs+0x0/0x72 @ 1 [ 2.075355] initcall init_devpts_fs+0x0/0x72 returned 0 after 0 usecs [ 2.076008] calling init_dlm+0x0/0xbe @ 1 [ 2.079348] DLM (built Aug 4 2009 11:29:49) installed [ 2.080063] initcall init_dlm+0x0/0xbe returned 0 after 2929 usecs [ 2.081009] calling init_ext3_fs+0x0/0x99 @ 1 [ 2.083533] initcall init_ext3_fs+0x0/0x99 returned 0 after 976 usecs [ 2.084093] calling journal_init+0x0/0xf5 @ 1 [ 2.088278] initcall journal_init+0x0/0xf5 returned 0 after 2929 usecs [ 2.089086] calling journal_init+0x0/0xd6 @ 1 [ 2.093170] initcall journal_init+0x0/0xd6 returned 0 after 2929 usecs [ 2.094059] calling init_cramfs_fs+0x0/0x57 @ 1 [ 2.095048] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs [ 2.096009] calling init_squashfs_fs+0x0/0x93 @ 1 [ 2.098087] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.099058] initcall init_squashfs_fs+0x0/0x93 returned 0 after 1953 usecs [ 2.100008] calling init_ramfs_fs+0x0/0x39 @ 1 [ 2.101010] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs [ 2.102008] calling init_hugetlbfs_fs+0x0/0xbe @ 1 [ 2.104309] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 976 usecs [ 2.105015] calling init_coda+0x0/0x16a @ 1 [ 2.110167] initcall init_coda+0x0/0x16a returned 0 after 3906 usecs [ 2.111009] calling init_fat_fs+0x0/0x75 @ 1 [ 2.114157] initcall init_fat_fs+0x0/0x75 returned 0 after 1953 usecs [ 2.115098] calling init_vfat_fs+0x0/0x39 @ 1 [ 2.116011] initcall init_vfat_fs+0x0/0x39 returned 0 after 0 usecs [ 2.117008] calling init_msdos_fs+0x0/0x39 @ 1 [ 2.118010] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs [ 2.119056] calling init_hfsplus_fs+0x0/0x83 @ 1 [ 2.120417] initcall init_hfsplus_fs+0x0/0x83 returned 0 after 0 usecs [ 2.121060] calling ecryptfs_init+0x0/0x220 @ 1 [ 2.132370] initcall ecryptfs_init+0x0/0x220 returned 0 after 9765 usecs [ 2.133154] calling vxfs_init+0x0/0x7f @ 1 [ 2.135175] initcall vxfs_init+0x0/0x7f returned 0 after 976 usecs [ 2.136061] calling init_nfs_fs+0x0/0x15e @ 1 [ 2.141081] initcall init_nfs_fs+0x0/0x15e returned 0 after 3906 usecs [ 2.142009] calling init_nfsd+0x0/0xe1 @ 1 [ 2.143007] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.145978] initcall init_nfsd+0x0/0xe1 returned 0 after 1953 usecs [ 2.146009] calling init_nlm+0x0/0x49 @ 1 [ 2.147013] initcall init_nlm+0x0/0x49 returned 0 after 0 usecs [ 2.148009] calling init_nls_cp737+0x0/0x39 @ 1 [ 2.149082] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs [ 2.150008] calling init_nls_cp775+0x0/0x39 @ 1 [ 2.151010] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs [ 2.152009] calling init_nls_cp852+0x0/0x39 @ 1 [ 2.153058] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs [ 2.154008] calling init_nls_cp855+0x0/0x39 @ 1 [ 2.155010] initcall init_nls_cp855+0x0/0x39 returned 0 after 0 usecs [ 2.156008] calling init_nls_cp857+0x0/0x39 @ 1 [ 2.157058] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs [ 2.158008] calling init_nls_cp861+0x0/0x39 @ 1 [ 2.159010] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs [ 2.160008] calling init_nls_cp865+0x0/0x39 @ 1 [ 2.161058] initcall init_nls_cp865+0x0/0x39 returned 0 after 0 usecs [ 2.162008] calling init_nls_cp866+0x0/0x39 @ 1 [ 2.163010] initcall init_nls_cp866+0x0/0x39 returned 0 after 0 usecs [ 2.164008] calling init_nls_cp869+0x0/0x39 @ 1 [ 2.165058] initcall init_nls_cp869+0x0/0x39 returned 0 after 0 usecs [ 2.166013] calling init_nls_cp874+0x0/0x39 @ 1 [ 2.167010] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs [ 2.168008] calling init_nls_cp932+0x0/0x39 @ 1 [ 2.170011] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs [ 2.171008] calling init_nls_euc_jp+0x0/0x6f @ 1 [ 2.172011] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs [ 2.173057] calling init_nls_cp936+0x0/0x39 @ 1 [ 2.174010] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs [ 2.175008] calling init_nls_cp950+0x0/0x39 @ 1 [ 2.176010] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs [ 2.177057] calling init_nls_cp1250+0x0/0x39 @ 1 [ 2.178010] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs [ 2.179009] calling init_nls_cp1251+0x0/0x39 @ 1 [ 2.180010] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs [ 2.181058] calling init_nls_iso8859_1+0x0/0x39 @ 1 [ 2.182010] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs [ 2.183009] calling init_nls_iso8859_2+0x0/0x39 @ 1 [ 2.184010] initcall init_nls_iso8859_2+0x0/0x39 returned 0 after 0 usecs [ 2.185057] calling init_nls_iso8859_4+0x0/0x39 @ 1 [ 2.186010] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs [ 2.187009] calling init_nls_iso8859_5+0x0/0x39 @ 1 [ 2.188010] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs [ 2.189057] calling init_nls_iso8859_6+0x0/0x39 @ 1 [ 2.190010] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs [ 2.191009] calling init_nls_cp1255+0x0/0x39 @ 1 [ 2.192010] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs [ 2.193057] calling init_nls_iso8859_9+0x0/0x39 @ 1 [ 2.194010] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs [ 2.195009] calling init_nls_iso8859_13+0x0/0x39 @ 1 [ 2.196010] initcall init_nls_iso8859_13+0x0/0x39 returned 0 after 0 usecs [ 2.197059] calling init_nls_iso8859_14+0x0/0x39 @ 1 [ 2.198010] initcall init_nls_iso8859_14+0x0/0x39 returned 0 after 0 usecs [ 2.199009] calling init_nls_iso8859_15+0x0/0x39 @ 1 [ 2.200010] initcall init_nls_iso8859_15+0x0/0x39 returned 0 after 0 usecs [ 2.201057] calling init_nls_utf8+0x0/0x4a @ 1 [ 2.202010] initcall init_nls_utf8+0x0/0x4a returned 0 after 0 usecs [ 2.203009] calling init_sysv_fs+0x0/0x75 @ 1 [ 2.205513] initcall init_sysv_fs+0x0/0x75 returned 0 after 976 usecs [ 2.206082] calling init_cifs+0x0/0x37a @ 1 [ 2.211310] initcall init_cifs+0x0/0x37a returned 0 after 3906 usecs [ 2.212066] calling init_ufs_fs+0x0/0x89 @ 1 [ 2.214163] initcall init_ufs_fs+0x0/0x89 returned 0 after 976 usecs [ 2.215075] calling init_efs_fs+0x0/0x95 @ 1 [ 2.216007] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 2.218328] initcall init_efs_fs+0x0/0x95 returned 0 after 1953 usecs [ 2.220015] calling init_autofs4_fs+0x0/0x4c @ 1 [ 2.222152] initcall init_autofs4_fs+0x0/0x4c returned 0 after 976 usecs [ 2.223009] calling init_adfs_fs+0x0/0x89 @ 1 [ 2.224365] initcall init_adfs_fs+0x0/0x89 returned 0 after 0 usecs [ 2.225011] calling init_omfs_fs+0x0/0x39 @ 1 [ 2.226010] initcall init_omfs_fs+0x0/0x39 returned 0 after 0 usecs [ 2.227008] calling init_jfs_fs+0x0/0x28a @ 1 [ 2.229381] JFS: nTxBlock = 7060, nTxLock = 56484 [ 2.239148] initcall init_jfs_fs+0x0/0x28a returned 0 after 10742 usecs [ 2.240010] calling init_nilfs_fs+0x0/0xb9 @ 1 [ 2.244156] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 2929 usecs [ 2.245065] calling ocfs2_init+0x0/0x484 @ 1 [ 2.246007] OCFS2 1.5.0 [ 2.252157] initcall ocfs2_init+0x0/0x484 returned 0 after 5859 usecs [ 2.253065] calling ocfs2_stack_glue_init+0x0/0xbb @ 1 [ 2.255053] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs [ 2.256009] calling o2cb_stack_init+0x0/0x39 @ 1 [ 2.257056] ocfs2: Registered cluster interface o2cb [ 2.258009] initcall o2cb_stack_init+0x0/0x39 returned 0 after 976 usecs [ 2.259008] calling ocfs2_user_plugin_init+0x0/0x7c @ 1 [ 2.261065] ocfs2: Registered cluster interface user [ 2.262058] initcall ocfs2_user_plugin_init+0x0/0x7c returned 0 after 1953 usecs [ 2.263008] calling init_o2nm+0x0/0xcf @ 1 [ 2.264007] OCFS2 Node Manager 1.5.0 [ 2.268595] initcall init_o2nm+0x0/0xcf returned 0 after 3906 usecs [ 2.269016] calling dlm_init+0x0/0x356 @ 1 [ 2.270007] OCFS2 DLM 1.5.0 [ 2.273449] initcall dlm_init+0x0/0x356 returned 0 after 2929 usecs [ 2.274066] calling init_dlmfs_fs+0x0/0x106 @ 1 [ 2.275007] OCFS2 DLMFS 1.5.0 [ 2.277149] OCFS2 User DLM kernel interface loaded [ 2.278127] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 2929 usecs [ 2.279009] calling init_gfs2_fs+0x0/0x20d @ 1 [ 2.285163] Slow work thread pool: Starting up [ 2.286157] Slow work thread pool: Ready [ 2.288035] GFS2 (built Aug 4 2009 11:30:00) installed [ 2.289014] initcall init_gfs2_fs+0x0/0x20d returned 0 after 8789 usecs [ 2.290009] calling init_exofs+0x0/0x89 @ 1 [ 2.291444] initcall init_exofs+0x0/0x89 returned 0 after 0 usecs [ 2.293017] calling init_mqueue_fs+0x0/0xee @ 1 [ 2.295326] initcall init_mqueue_fs+0x0/0xee returned 0 after 976 usecs [ 2.296116] calling key_proc_init+0x0/0x5a @ 1 [ 2.297033] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs [ 2.298009] calling init_sel_fs+0x0/0x8e @ 1 [ 2.299009] initcall init_sel_fs+0x0/0x8e returned 0 after 0 usecs [ 2.300056] calling selnl_init+0x0/0x74 @ 1 [ 2.301038] initcall selnl_init+0x0/0x74 returned 0 after 0 usecs [ 2.302009] calling sel_netif_init+0x0/0x8d @ 1 [ 2.303009] initcall sel_netif_init+0x0/0x8d returned 0 after 0 usecs [ 2.304057] calling sel_netnode_init+0x0/0x9a @ 1 [ 2.305009] initcall sel_netnode_init+0x0/0x9a returned 0 after 0 usecs [ 2.306009] calling sel_netport_init+0x0/0x9a @ 1 [ 2.307009] initcall sel_netport_init+0x0/0x9a returned 0 after 0 usecs [ 2.308057] calling aurule_init+0x0/0x5e @ 1 [ 2.309011] initcall aurule_init+0x0/0x5e returned 0 after 0 usecs [ 2.310009] calling crypto_wq_init+0x0/0x59 @ 1 [ 2.311165] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs [ 2.312106] calling crypto_algapi_init+0x0/0x34 @ 1 [ 2.313028] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs [ 2.314009] calling chainiv_module_init+0x0/0x39 @ 1 [ 2.315017] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.316058] calling eseqiv_module_init+0x0/0x39 @ 1 [ 2.317014] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.318009] calling seqiv_module_init+0x0/0x39 @ 1 [ 2.319014] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.320059] calling hmac_module_init+0x0/0x39 @ 1 [ 2.321014] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.322009] calling crypto_xcbc_module_init+0x0/0x39 @ 1 [ 2.323014] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.324057] calling crypto_null_mod_init+0x0/0xa5 @ 1 [ 2.325102] alg: No test for cipher_null (cipher_null-generic) [ 2.332072] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 2.333262] alg: No test for digest_null (digest_null-generic) [ 2.339348] alg: No test for compress_null (compress_null-generic) [ 2.340064] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 14648 usecs [ 2.341064] calling md5_mod_init+0x0/0x39 @ 1 [ 2.342105] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.344011] calling rmd160_mod_init+0x0/0x39 @ 1 [ 2.345096] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.346059] calling rmd320_mod_init+0x0/0x39 @ 1 [ 2.347110] initcall rmd320_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.348014] calling sha1_generic_mod_init+0x0/0x39 @ 1 [ 2.349108] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.350011] calling sha256_generic_mod_init+0x0/0x65 @ 1 [ 2.352264] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 976 usecs [ 2.353064] calling sha512_generic_mod_init+0x0/0x65 @ 1 [ 2.354247] initcall sha512_generic_mod_init+0x0/0x65 returned 0 after 0 usecs [ 2.356040] calling crypto_ecb_module_init+0x0/0x39 @ 1 [ 2.357014] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.358009] calling crypto_cbc_module_init+0x0/0x39 @ 1 [ 2.359061] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.360009] calling crypto_pcbc_module_init+0x0/0x39 @ 1 [ 2.361014] initcall crypto_pcbc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.362009] calling crypto_cts_module_init+0x0/0x39 @ 1 [ 2.364016] initcall crypto_cts_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.365009] calling crypto_module_init+0x0/0x39 @ 1 [ 2.366014] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.368010] calling crypto_module_init+0x0/0x39 @ 1 [ 2.370016] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.371057] calling crypto_ctr_module_init+0x0/0x69 @ 1 [ 2.372019] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs [ 2.373009] calling crypto_ccm_module_init+0x0/0x87 @ 1 [ 2.374024] initcall crypto_ccm_module_init+0x0/0x87 returned 0 after 0 usecs [ 2.375057] calling cryptd_init+0x0/0x109 @ 1 [ 2.376020] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs [ 2.377009] calling des_generic_mod_init+0x0/0x65 @ 1 [ 2.379246] initcall des_generic_mod_init+0x0/0x65 returned 0 after 976 usecs [ 2.380059] calling fcrypt_mod_init+0x0/0x39 @ 1 [ 2.381111] alg: No test for fcrypt (fcrypt-generic) [ 2.386510] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 4882 usecs [ 2.387009] calling blowfish_mod_init+0x0/0x39 @ 1 [ 2.389276] initcall blowfish_mod_init+0x0/0x39 returned 0 after 976 usecs [ 2.390009] calling aes_init+0x0/0x39 @ 1 [ 2.391143] initcall aes_init+0x0/0x39 returned 0 after 0 usecs [ 2.392011] calling camellia_init+0x0/0x39 @ 1 [ 2.393147] initcall camellia_init+0x0/0x39 returned 0 after 0 usecs [ 2.394011] calling cast5_mod_init+0x0/0x39 @ 1 [ 2.395111] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.396011] calling arc4_init+0x0/0x39 @ 1 [ 2.397132] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs [ 2.398011] calling tea_mod_init+0x0/0x8a @ 1 [ 2.400387] initcall tea_mod_init+0x0/0x8a returned 0 after 976 usecs [ 2.401064] calling khazad_mod_init+0x0/0x39 @ 1 [ 2.402157] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.403084] calling deflate_mod_init+0x0/0x39 @ 1 [ 2.405812] initcall deflate_mod_init+0x0/0x39 returned 0 after 976 usecs [ 2.406014] calling michael_mic_init+0x0/0x39 @ 1 [ 2.407135] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs [ 2.408011] calling crc32c_mod_init+0x0/0x39 @ 1 [ 2.409163] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs [ 2.410011] calling crypto_authenc_module_init+0x0/0x39 @ 1 [ 2.411015] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs [ 2.412009] calling krng_mod_init+0x0/0x39 @ 1 [ 2.413109] alg: No test for stdrng (krng) [ 2.417929] initcall krng_mod_init+0x0/0x39 returned 0 after 3906 usecs [ 2.418009] calling prng_mod_init+0x0/0x4e @ 1 [ 2.419109] alg: No test for stdrng (ansi_cprng) [ 2.423925] initcall prng_mod_init+0x0/0x4e returned 0 after 3906 usecs [ 2.424009] calling proc_genhd_init+0x0/0x63 @ 1 [ 2.425037] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs [ 2.426009] calling bsg_init+0x0/0x155 @ 1 [ 2.428112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.429128] initcall bsg_init+0x0/0x155 returned 0 after 1953 usecs [ 2.430009] calling noop_init+0x0/0x3b @ 1 [ 2.431056] io scheduler noop registered [ 2.432009] initcall noop_init+0x0/0x3b returned 0 after 976 usecs [ 2.433056] calling as_init+0x0/0x3b @ 1 [ 2.434008] io scheduler anticipatory registered (default) [ 2.435009] initcall as_init+0x0/0x3b returned 0 after 976 usecs [ 2.436009] calling deadline_init+0x0/0x3b @ 1 [ 2.437057] io scheduler deadline registered [ 2.438009] initcall deadline_init+0x0/0x3b returned 0 after 976 usecs [ 2.439009] calling cfq_init+0x0/0xbb @ 1 [ 2.441523] io scheduler cfq registered [ 2.442105] initcall cfq_init+0x0/0xbb returned 0 after 1953 usecs [ 2.443009] calling debug_objects_init_debugfs+0x0/0x8a @ 1 [ 2.444073] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs [ 2.445008] calling libcrc32c_mod_init+0x0/0x53 @ 1 [ 2.446066] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs [ 2.447008] calling percpu_counter_startup+0x0/0x54 @ 1 [ 2.448008] initcall percpu_counter_startup+0x0/0x54 returned 0 after 0 usecs [ 2.449009] calling pci_init+0x0/0x60 @ 1 [ 2.450072] pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.451050] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.452011] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.453009] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xe3 [ 2.454068] pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.455012] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.456009] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.457009] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3 [ 2.458068] pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.459017] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.460009] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.461009] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xe3 [ 2.462068] pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.463017] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.464009] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.476052] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe3 [ 2.477020] pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.478022] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.479009] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.480037] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xe3 [ 2.481019] pci 0000:00:04.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.482017] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.483009] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.484009] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xe3 [ 2.485019] pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.486017] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.487009] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.488008] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xe3 [ 2.489019] pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.490011] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.491009] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.492008] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xe3 [ 2.493019] pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.494017] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.495009] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.496009] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3 [ 2.497019] pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.499151] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.500009] pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.501025] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 2.502023] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.503009] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.504010] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.505009] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.506008] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xe3 [ 2.507019] pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.508167] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.509009] pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.510025] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 2.511024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.512009] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.513010] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.514009] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.515008] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xe3 [ 2.516019] pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.517187] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.518009] pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.519025] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 2.520024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.521009] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.522010] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.523009] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.524008] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3 [ 2.525019] pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x39 [ 2.526208] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.527009] pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0xb3 [ 2.528025] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 2.529024] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.530009] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1 [ 2.531010] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.532009] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.533008] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xe3 [ 2.534019] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x76 [ 2.535014] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.536009] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.537008] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3 [ 2.538018] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x76 [ 2.539014] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.540009] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.541008] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3 [ 2.542019] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x76 [ 2.543014] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e [ 2.544009] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.545008] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3 [ 2.546018] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x76 [ 2.547014] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e [ 2.548009] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.549008] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3 [ 2.550019] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.551009] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.552008] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xe3 [ 2.553019] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e [ 2.554009] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.555008] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3 [ 2.556011] pci 0000:01:00.0: Boot video device [ 2.557019] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e [ 2.558009] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0xc4 [ 2.559008] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3 [ 2.560018] initcall pci_init+0x0/0x60 returned 0 after 107421 usecs [ 2.561008] calling pci_proc_init+0x0/0x90 @ 1 [ 2.562507] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs [ 2.563009] calling pcie_portdrv_init+0x0/0x72 @ 1 [ 2.564236] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X [ 2.565021] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 2.566299] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X [ 2.567075] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 2.569094] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X [ 2.570019] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 2.572233] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X [ 2.573096] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 2.575235] initcall pcie_portdrv_init+0x0/0x72 returned 0 after 10742 usecs [ 2.576066] calling aer_service_init+0x0/0x47 @ 1 [ 2.577150] initcall aer_service_init+0x0/0x47 returned 0 after 0 usecs [ 2.578084] calling aer_inject_init+0x0/0x39 @ 1 [ 2.579119] initcall aer_inject_init+0x0/0x39 returned 0 after 0 usecs [ 2.581012] calling pci_hotplug_init+0x0/0x74 @ 1 [ 2.582007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.583008] initcall pci_hotplug_init+0x0/0x74 returned 0 after 976 usecs [ 2.584056] calling pcied_init+0x0/0x9a @ 1 [ 2.585097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.586059] initcall pcied_init+0x0/0x9a returned 0 after 976 usecs [ 2.587009] calling zt5550_init+0x0/0xa3 @ 1 [ 2.588007] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 2.590149] initcall zt5550_init+0x0/0xa3 returned 0 after 1953 usecs [ 2.591014] calling cpcihp_generic_init+0x0/0x254 @ 1 [ 2.592007] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 2.593007] cpcihp_generic: not configured, disabling. [ 2.594009] initcall cpcihp_generic_init+0x0/0x254 returned -22 after 1953 usecs [ 2.595063] initcall cpcihp_generic_init+0x0/0x254 returned with error code -22 [ 2.596008] calling init_legacy+0x0/0x69 @ 1 [ 2.597491] initcall init_legacy+0x0/0x69 returned 0 after 0 usecs [ 2.598009] calling platform_lcd_init+0x0/0x39 @ 1 [ 2.600037] initcall platform_lcd_init+0x0/0x39 returned 0 after 976 usecs [ 2.601009] calling tdo24m_init+0x0/0x39 @ 1 [ 2.602095] initcall tdo24m_init+0x0/0x39 returned 0 after 0 usecs [ 2.603011] calling progearbl_init+0x0/0x7b @ 1 [ 2.605216] ALI M7101 PMU not found. [ 2.606178] initcall progearbl_init+0x0/0x7b returned 0 after 1953 usecs [ 2.607009] calling cr_backlight_init+0x0/0x8b @ 1 [ 2.609196] INTEL CARILLO RANCH LPC not found. [ 2.610124] Carillo Ranch Backlight Driver Initialized. [ 2.611010] initcall cr_backlight_init+0x0/0x8b returned 0 after 2929 usecs [ 2.612008] calling kb3886_init+0x0/0x63 @ 1 [ 2.613010] initcall kb3886_init+0x0/0x63 returned -19 after 0 usecs [ 2.614056] calling arcfb_init+0x0/0x9a @ 1 [ 2.615009] initcall arcfb_init+0x0/0x9a returned -6 after 0 usecs [ 2.616009] initcall arcfb_init+0x0/0x9a returned with error code -6 [ 2.617008] calling cyber2000fb_init+0x0/0xf6 @ 1 [ 2.619096] initcall cyber2000fb_init+0x0/0xf6 returned 0 after 976 usecs [ 2.620060] calling pm3fb_init+0x0/0x107 @ 1 [ 2.621123] initcall pm3fb_init+0x0/0x107 returned 0 after 0 usecs [ 2.622015] calling matroxfb_init+0x0/0x8d @ 1 [ 2.623134] initcall matroxfb_init+0x0/0x8d returned 0 after 0 usecs [ 2.624066] calling matroxfb_crtc2_init+0x0/0x59 @ 1 [ 2.625010] initcall matroxfb_crtc2_init+0x0/0x59 returned 0 after 0 usecs [ 2.626008] calling atyfb_init+0x0/0x94 @ 1 [ 2.627157] initcall atyfb_init+0x0/0x94 returned 0 after 0 usecs [ 2.628121] calling aty128fb_init+0x0/0x75 @ 1 [ 2.629282] initcall aty128fb_init+0x0/0x75 returned 0 after 0 usecs [ 2.630104] calling sisfb_init+0x0/0x70 @ 1 [ 2.631126] initcall sisfb_init+0x0/0x70 returned 0 after 0 usecs [ 2.632091] calling viafb_init+0x0/0x78 @ 1 [ 2.633008] VIA Graphics Intergration Chipset framebuffer 2.4 initializing [ 2.634254] i2c-adapter i2c-0: adapter [via_i2c] registered [ 2.635315] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.636009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 2.659009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.702009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.745008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.788008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.789009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 2.790008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 2.812053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.813008] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 2.835008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.878009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.921008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.964008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 2.965009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 2.966008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 2.988063] i2c-adapter i2c-0: master_xfer[0] W, addr=0x08, len=1 [ 2.989008] i2c-adapter i2c-0: master_xfer[1] R, addr=0x08, len=1 [ 3.011008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.054009] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.097008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.140008] i2c-adapter i2c-0: i2c_outb: 0x10, timeout at bit #7 [ 3.141009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x08: failed, timeout? [ 3.142008] i2c-adapter i2c-0: NAK from device addr 0x08 msg #0 [ 3.164052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.165009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.187009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.230009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.273008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.316009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.317009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.318008] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.340052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.341009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.363008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.406008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.449009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.492008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.493009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.494009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.516052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.517009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.539009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.582008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.625009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.668008] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.669009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.670009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.692056] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.693009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.715009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.758009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.801009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.844009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.845009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 3.846009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 3.868052] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 3.869009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 3.891009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.934009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 3.977010] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.020009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.021009] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 4.022009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 4.044053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 [ 4.045009] i2c-adapter i2c-0: master_xfer[1] R, addr=0x50, len=1 [ 4.067009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.110009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.153009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.196009] i2c-adapter i2c-0: i2c_outb: 0xa0, timeout at bit #7 [ 4.197010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x50: failed, timeout? [ 4.198009] i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 [ 4.220054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.221010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.243009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.286010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.329010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.372010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.373010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.374009] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.396053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.397010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.419010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.462009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.505009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.548010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.549010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.550009] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.572054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.573010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.595009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.638009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.681010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.724011] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.725010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.726010] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.748053] i2c-adapter i2c-0: master_xfer[0] W, addr=0x40, len=1 [ 4.749010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x40, len=1 [ 4.771010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.814009] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.857010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.900010] i2c-adapter i2c-0: i2c_outb: 0x80, timeout at bit #7 [ 4.901010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x40: failed, timeout? [ 4.902010] i2c-adapter i2c-0: NAK from device addr 0x40 msg #0 [ 4.924054] i2c-adapter i2c-0: master_xfer[0] W, addr=0x38, len=1 [ 4.925010] i2c-adapter i2c-0: master_xfer[1] R, addr=0x38, len=1 [ 4.947010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 4.990010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.033010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.076010] i2c-adapter i2c-0: i2c_outb: 0x70, timeout at bit #7 [ 5.077010] i2c-adapter i2c-0: Used 4 tries to write to client at 0x38: failed, timeout? [ 5.078010] i2c-adapter i2c-0: NAK from device addr 0x38 msg #0 [ 5.100057] ioremap failed [ 5.101012] initcall viafb_init+0x0/0x78 returned -1 after 2410158 usecs [ 5.102011] initcall viafb_init+0x0/0x78 returned with error code -1 [ 5.103010] calling kyrofb_init+0x0/0xf0 @ 1 [ 5.104138] initcall kyrofb_init+0x0/0xf0 returned 0 after 0 usecs [ 5.105011] calling savagefb_init+0x0/0x9a @ 1 [ 5.106256] initcall savagefb_init+0x0/0x9a returned 0 after 0 usecs [ 5.107013] calling gx1fb_init+0x0/0x70 @ 1 [ 5.108243] initcall gx1fb_init+0x0/0x70 returned 0 after 0 usecs [ 5.109013] calling gxfb_init+0x0/0xa7 @ 1 [ 5.110137] initcall gxfb_init+0x0/0xa7 returned 0 after 0 usecs [ 5.111013] calling neofb_init+0x0/0x70 @ 1 [ 5.113164] initcall neofb_init+0x0/0x70 returned 0 after 976 usecs [ 5.114011] calling tdfxfb_init+0x0/0x129 @ 1 [ 5.116038] initcall tdfxfb_init+0x0/0x129 returned 0 after 976 usecs [ 5.117067] calling vt8623fb_init+0x0/0x7c @ 1 [ 5.118124] initcall vt8623fb_init+0x0/0x7c returned 0 after 0 usecs [ 5.119013] calling tridentfb_init+0x0/0x70 @ 1 [ 5.120126] initcall tridentfb_init+0x0/0x70 returned 0 after 0 usecs [ 5.121013] calling vmlfb_init+0x0/0xbb @ 1 [ 5.122009] vmlfb: initializing [ 5.124237] initcall vmlfb_init+0x0/0xbb returned 0 after 1953 usecs [ 5.125061] calling cr_pll_init+0x0/0x10a @ 1 [ 5.126033] Could not find Carillo Ranch MCH device. [ 5.127011] initcall cr_pll_init+0x0/0x10a returned -19 after 976 usecs [ 5.128010] calling s3fb_init+0x0/0xdf @ 1 [ 5.130123] initcall s3fb_init+0x0/0xdf returned 0 after 976 usecs [ 5.131076] calling metronomefb_init+0x0/0x39 @ 1 [ 5.132147] initcall metronomefb_init+0x0/0x39 returned 0 after 0 usecs [ 5.133091] calling broadsheetfb_init+0x0/0x39 @ 1 [ 5.134115] initcall broadsheetfb_init+0x0/0x39 returned 0 after 0 usecs [ 5.135059] calling s1d13xxxfb_init+0x0/0x54 @ 1 [ 5.136099] initcall s1d13xxxfb_init+0x0/0x54 returned 0 after 0 usecs [ 5.137060] calling xenfb_init+0x0/0x6b @ 1 [ 5.138011] initcall xenfb_init+0x0/0x6b returned -19 after 0 usecs [ 5.139012] calling uvesafb_init+0x0/0x116 @ 1 [ 5.141327] uvesafb: failed to execute /sbin/v86d [ 5.142108] uvesafb: make sure that the v86d helper is installed and executable [ 5.143018] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 5.144016] uvesafb: vbe_init() failed with -22 [ 5.145050] uvesafb: probe of uvesafb.0 failed with error -22 [ 5.146074] initcall uvesafb_init+0x0/0x116 returned 0 after 5859 usecs [ 5.147011] calling evtchn_init+0x0/0x94 @ 1 [ 5.148011] initcall evtchn_init+0x0/0x94 returned -19 after 0 usecs [ 5.149010] calling xenfs_init+0x0/0x54 @ 1 [ 5.150058] XENFS: not registering filesystem on non-xen platform [ 5.151011] initcall xenfs_init+0x0/0x54 returned 0 after 976 usecs [ 5.152012] calling rand_initialize+0x0/0x58 @ 1 [ 5.153053] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs [ 5.154059] calling tty_init+0x0/0x11c @ 1 [ 5.182346] initcall tty_init+0x0/0x11c returned 0 after 26367 usecs [ 5.183113] calling pty_init+0x0/0x39 @ 1 [ 5.405330] initcall pty_init+0x0/0x39 returned 0 after 215820 usecs [ 5.406190] calling sysrq_init+0x0/0x4c @ 1 [ 5.407038] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs [ 5.408011] calling rp_init+0x0/0x34f @ 1 [ 5.409010] RocketPort device driver module, version 2.09, 12-June-2003 [ 5.410137] No rocketport ports found; unloading driver [ 5.411093] initcall rp_init+0x0/0x34f returned -6 after 1953 usecs [ 5.412011] initcall rp_init+0x0/0x34f returned with error code -6 [ 5.413010] calling cy_init+0x0/0x148 @ 1 [ 5.414061] Cyclades driver 2.5 (built Aug 4 2009 11:29:45) [ 5.415345] initcall cy_init+0x0/0x148 returned 0 after 976 usecs [ 5.416096] calling stallion_module_init+0x0/0x33d @ 1 [ 5.417010] Stallion Multiport Serial Driver: version 5.6.0 [ 5.421216] initcall stallion_module_init+0x0/0x33d returned 0 after 3906 usecs [ 5.422160] calling nozomi_init+0x0/0x153 @ 1 [ 5.423010] Initializing Nozomi driver 2.1d (build date: Aug 4 2009 11:29:47) [ 5.425098] initcall nozomi_init+0x0/0x153 returned 0 after 1953 usecs [ 5.426011] calling specialix_init_module+0x0/0xc4 @ 1 [ 5.427010] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. [ 5.428009] sx: derived from work (c) D.Gorodchanin 1994-1996. [ 5.429057] sx: DTR/RTS pin is always RTS. [ 5.461314] sx0: specialix IO8+ Board at 0x100 not found. [ 5.462088] sx1: specialix IO8+ Board at 0x180 not found. [ 5.463021] sx2: specialix IO8+ Board at 0x250 not found. [ 5.464021] sx3: specialix IO8+ Board at 0x260 not found. [ 5.530119] sx: No specialix IO8+ boards detected. [ 5.531016] initcall specialix_init_module+0x0/0xc4 returned -5 after 101562 usecs [ 5.532011] initcall specialix_init_module+0x0/0xc4 returned with error code -5 [ 5.533011] calling moxa_init+0x0/0x14c @ 1 [ 5.534058] MOXA Intellio family driver version 6.0k [ 5.601360] initcall moxa_init+0x0/0x14c returned 0 after 65429 usecs [ 5.602018] calling mxser_module_init+0x0/0x230 @ 1 [ 5.603013] MOXA Smartio/Industio family driver version 2.0.4 [ 5.604143] initcall mxser_module_init+0x0/0x230 returned 0 after 976 usecs [ 5.605014] calling ip2_loadmain+0x0/0xa04 @ 1 [ 5.607012] Computone IntelliPort Plus multiport driver version 1.2.14 [ 5.608158] initcall ip2_loadmain+0x0/0xa04 returned 0 after 976 usecs [ 5.609070] calling riscom8_init_module+0x0/0xb0 @ 1 [ 5.610009] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. [ 5.628222] rc0: RISCom/8 Board at 0x220 not found. [ 5.629231] rc1: RISCom/8 Board at 0x240 not found. [ 5.630075] rc2: RISCom/8 Board at 0x250 not found. [ 5.631075] rc3: RISCom/8 Board at 0x260 not found. [ 5.666224] rc: No RISCom/8 boards detected. [ 5.667079] initcall riscom8_init_module+0x0/0xb0 returned -5 after 55664 usecs [ 5.668011] initcall riscom8_init_module+0x0/0xb0 returned with error code -5 [ 5.669012] calling synclinkmp_init+0x0/0x1b7 @ 1 [ 5.670010] SyncLink MultiPort driver $Revision: 4.38 $ [ 5.742188] SyncLink MultiPort driver $Revision: 4.38 $, tty major#250 [ 5.744035] initcall synclinkmp_init+0x0/0x1b7 returned 0 after 72265 usecs [ 5.745012] calling slgt_init+0x0/0x1e6 @ 1 [ 5.746010] SyncLink GT [ 5.747088] SyncLink GT, tty major#249 [ 5.748175] SyncLink GT no devices found [ 5.750035] initcall slgt_init+0x0/0x1e6 returned 0 after 3906 usecs [ 5.751011] calling sx_init+0x0/0x10e @ 1 [ 5.753216] initcall sx_init+0x0/0x10e returned 0 after 976 usecs [ 5.754068] calling xen_init+0x0/0xbb @ 1 [ 5.755011] initcall xen_init+0x0/0xbb returned -19 after 0 usecs [ 5.756011] calling r3964_init+0x0/0x68 @ 1 [ 5.757010] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 5.758062] initcall r3964_init+0x0/0x68 returned 0 after 976 usecs [ 5.759012] calling nvram_init+0x0/0xaa @ 1 [ 5.760173] Non-volatile memory driver v1.3 [ 5.761067] initcall nvram_init+0x0/0xaa returned 0 after 976 usecs [ 5.762011] calling i8k_init+0x0/0x78 @ 1 [ 5.763015] initcall i8k_init+0x0/0x78 returned -19 after 0 usecs [ 5.764011] calling mod_init+0x0/0x231 @ 1 [ 5.766208] initcall mod_init+0x0/0x231 returned -19 after 976 usecs [ 5.767011] calling mod_init+0x0/0x73 @ 1 [ 5.768011] initcall mod_init+0x0/0x73 returned -19 after 0 usecs [ 5.769060] calling mwave_init+0x0/0x2ca @ 1 [ 5.770019] smapi::smapi_init, ERROR invalid usSmapiID [ 5.771010] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 5.772010] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 5.773058] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 5.774012] initcall mwave_init+0x0/0x2ca returned -5 after 3906 usecs [ 5.775012] initcall mwave_init+0x0/0x2ca returned with error code -5 [ 5.776012] calling agp_init+0x0/0x4b @ 1 [ 5.777058] Linux agpgart interface v0.103 [ 5.778012] initcall agp_init+0x0/0x4b returned 0 after 976 usecs [ 5.779011] calling agp_amd64_init+0x0/0xe8 @ 1 [ 5.780401] initcall agp_amd64_init+0x0/0xe8 returned -19 after 0 usecs [ 5.781110] calling agp_intel_init+0x0/0x50 @ 1 [ 5.782144] initcall agp_intel_init+0x0/0x50 returned 0 after 0 usecs [ 5.783018] calling agp_sis_init+0x0/0x50 @ 1 [ 5.784127] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs [ 5.785014] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1 [ 5.787120] ipmi message handler version 39.2 [ 5.788036] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 1953 usecs [ 5.789013] calling init_ipmi_si+0x0/0x286 @ 1 [ 5.790113] IPMI System Interface driver. [ 5.796337] ipmi_si: Unable to find any System Interface(s) [ 5.797064] initcall init_ipmi_si+0x0/0x286 returned -19 after 6835 usecs [ 5.798012] calling ipmi_wdog_init+0x0/0x153 @ 1 [ 5.800012] IPMI Watchdog: driver initialized [ 5.801059] initcall ipmi_wdog_init+0x0/0x153 returned 0 after 1953 usecs [ 5.802012] calling ipmi_poweroff_init+0x0/0xb7 @ 1 [ 5.803010] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 5.804024] initcall ipmi_poweroff_init+0x0/0xb7 returned 0 after 976 usecs [ 5.805060] calling init_atmel+0x0/0x1af @ 1 [ 5.806010] Platform driver 'tpm_atmel' needs updating - please use dev_pm_ops [ 5.808210] initcall init_atmel+0x0/0x1af returned -19 after 1953 usecs [ 5.809092] calling drm_core_init+0x0/0x145 @ 1 [ 5.810302] [drm] Initialized drm 1.1.0 20060810 [ 5.811077] initcall drm_core_init+0x0/0x145 returned 0 after 976 usecs [ 5.812011] calling tdfx_init+0x0/0x39 @ 1 [ 5.813142] initcall tdfx_init+0x0/0x39 returned 0 after 0 usecs [ 5.814011] calling radeon_init+0x0/0x50 @ 1 [ 5.818478] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) [ 5.819068] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 [ 5.820016] pci 0000:01:00.0: setting latency timer to 64 [ 5.822404] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 5.828678] initcall radeon_init+0x0/0x50 returned 0 after 12695 usecs [ 5.829012] calling mga_init+0x0/0x45 @ 1 [ 5.830099] initcall mga_init+0x0/0x45 returned 0 after 0 usecs [ 5.831060] calling i810_init+0x0/0x45 @ 1 [ 5.832098] initcall i810_init+0x0/0x45 returned 0 after 0 usecs [ 5.833012] calling savage_init+0x0/0x45 @ 1 [ 5.834504] initcall savage_init+0x0/0x45 returned 0 after 0 usecs [ 5.835060] calling via_init+0x0/0x4a @ 1 [ 5.837093] initcall via_init+0x0/0x4a returned 0 after 976 usecs [ 5.838012] calling cn_proc_init+0x0/0x63 @ 1 [ 5.839068] initcall cn_proc_init+0x0/0x63 returned 0 after 0 usecs [ 5.840012] calling intelfb_init+0x0/0x9f @ 1 [ 5.841010] intelfb: intelfb_init [ 5.842010] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 5.843058] intelfb: Version 0.9.6 [ 5.844010] intelfb: intelfb_setup [ 5.845009] intelfb: no options [ 5.846173] initcall intelfb_init+0x0/0x9f returned 0 after 4882 usecs [ 5.847111] calling serial8250_init+0x0/0x16f @ 1 [ 5.848011] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.850196] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.854100] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 5.855230] initcall serial8250_init+0x0/0x16f returned 0 after 6835 usecs [ 5.856206] calling serial8250_pci_init+0x0/0x42 @ 1 [ 5.858094] initcall serial8250_pci_init+0x0/0x42 returned 0 after 976 usecs [ 5.859068] calling max3100_init+0x0/0x39 @ 1 [ 5.861211] initcall max3100_init+0x0/0x39 returned 0 after 976 usecs [ 5.862060] calling init_kgdboc+0x0/0x3b @ 1 [ 5.863012] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs [ 5.864012] calling parport_default_proc_register+0x0/0x42 @ 1 [ 5.865021] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs [ 5.867013] calling parport_pc_init+0x0/0xd2 @ 1 [ 5.870368] parport0: PC-style at 0x378 (0x778)async_waiting @ 1 [ 5.873028] async_continuing @ 1 after 0 usec [ 6.012150] [PCSPP(,...)] [ 6.014823] parport0: irq 7 detected [ 6.016380] initcall parport_pc_init+0x0/0xd2 returned 0 after 144531 usecs [ 6.018014] calling parport_serial_init+0x0/0x42 @ 1 [ 6.019159] initcall parport_serial_init+0x0/0x42 returned 0 after 0 usecs [ 6.020137] calling parport_ax88796_init+0x0/0x39 @ 1 [ 6.021109] initcall parport_ax88796_init+0x0/0x39 returned 0 after 0 usecs [ 6.022088] calling topology_sysfs_init+0x0/0x82 @ 1 [ 6.023095] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs [ 6.024012] calling floppy_init+0x0/0x5bf @ 1 [ 6.025162] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 6.027316] Floppy drive(s): fd0 is 1.44M [ 6.043015] FDC 0 is a post-1991 82077 [ 6.047235] initcall floppy_init+0x0/0x5bf returned 0 after 21484 usecs [ 6.049014] calling brd_init+0x0/0x193 @ 1 [ 6.067335] brd: module loaded [ 6.068135] initcall brd_init+0x0/0x193 returned 0 after 17578 usecs [ 6.069012] calling loop_init+0x0/0x1bc @ 1 [ 6.079203] loop: module loaded [ 6.080169] initcall loop_init+0x0/0x1bc returned 0 after 9765 usecs [ 6.081012] calling cpqarray_init+0x0/0x92 @ 1 [ 6.082010] Compaq SMART2 Driver (v 2.6.0) [ 6.084205] initcall cpqarray_init+0x0/0x92 returned -19 after 1953 usecs [ 6.085110] calling DAC960_init_module+0x0/0x78 @ 1 [ 6.087163] initcall DAC960_init_module+0x0/0x78 returned 0 after 976 usecs [ 6.088075] calling init_cryptoloop+0x0/0x55 @ 1 [ 6.089013] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs [ 6.090012] calling carm_init+0x0/0x42 @ 1 [ 6.091131] initcall carm_init+0x0/0x42 returned 0 after 0 usecs [ 6.092065] calling ibmasm_init+0x0/0x8a @ 1 [ 6.093230] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 6.094015] initcall ibmasm_init+0x0/0x8a returned 0 after 976 usecs [ 6.095012] calling ics932s401_init+0x0/0x3b @ 1 [ 6.096275] i2c-core: driver [ics932s401] registered [ 6.097054] initcall ics932s401_init+0x0/0x3b returned 0 after 976 usecs [ 6.098012] calling tifm_7xx1_init+0x0/0x42 @ 1 [ 6.099129] initcall tifm_7xx1_init+0x0/0x42 returned 0 after 0 usecs [ 6.100015] calling phantom_init+0x0/0x12f @ 1 [ 6.102236] Phantom Linux Driver, version n0.9.8, init OK [ 6.103064] initcall phantom_init+0x0/0x12f returned 0 after 1953 usecs [ 6.104013] calling ioc4_init+0x0/0x47 @ 1 [ 6.105309] initcall ioc4_init+0x0/0x47 returned 0 after 0 usecs [ 6.106074] calling ilo_init+0x0/0xb8 @ 1 [ 6.107161] initcall ilo_init+0x0/0xb8 returned 0 after 0 usecs [ 6.108099] calling isl29003_init+0x0/0x3b @ 1 [ 6.109134] i2c-core: driver [isl29003] registered [ 6.110083] initcall isl29003_init+0x0/0x3b returned 0 after 976 usecs [ 6.111012] calling c2port_init+0x0/0x77 @ 1 [ 6.112010] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 6.113087] initcall c2port_init+0x0/0x77 returned 0 after 976 usecs [ 6.114142] calling duramar2150_c2port_init+0x0/0x97 @ 1 [ 6.116174] c2port c2port0: C2 port uc added [ 6.117065] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 6.118013] initcall duramar2150_c2port_init+0x0/0x97 returned 0 after 2929 usecs [ 6.119012] calling at24_init+0x0/0x5d @ 1 [ 6.120126] i2c-core: driver [at24] registered [ 6.121116] initcall at24_init+0x0/0x5d returned 0 after 976 usecs [ 6.122012] calling at25_init+0x0/0x39 @ 1 [ 6.123140] initcall at25_init+0x0/0x39 returned 0 after 0 usecs [ 6.124018] calling eeprom_init+0x0/0x3b @ 1 [ 6.125095] i2c-core: driver [eeprom] registered [ 6.126025] initcall eeprom_init+0x0/0x3b returned 0 after 976 usecs [ 6.127012] calling max6875_init+0x0/0x3b @ 1 [ 6.129198] i2c-core: driver [max6875] registered [ 6.130021] initcall max6875_init+0x0/0x3b returned 0 after 1953 usecs [ 6.131012] calling cb710_init_module+0x0/0x42 @ 1 [ 6.132151] initcall cb710_init_module+0x0/0x42 returned 0 after 0 usecs [ 6.133069] calling pasic3_base_init+0x0/0x40 @ 1 [ 6.134256] initcall pasic3_base_init+0x0/0x40 returned -19 after 0 usecs [ 6.135015] calling ezx_pcap_init+0x0/0x39 @ 1 [ 6.136096] initcall ezx_pcap_init+0x0/0x39 returned 0 after 0 usecs [ 6.137015] calling pcf50633_adc_init+0x0/0x39 @ 1 [ 6.139031] initcall pcf50633_adc_init+0x0/0x39 returned 0 after 976 usecs [ 6.140014] calling mac_hid_init+0x0/0xfd @ 1 [ 6.142074] input: Macintosh mouse button emulation as /class/input/input0 [ 6.143032] initcall mac_hid_init+0x0/0xfd returned 0 after 1953 usecs [ 6.144011] calling scsi_tgt_init+0x0/0xb1 @ 1 [ 6.146464] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 976 usecs [ 6.147071] calling spi_transport_init+0x0/0x9f @ 1 [ 6.149169] initcall spi_transport_init+0x0/0x9f returned 0 after 976 usecs [ 6.150143] calling fc_transport_init+0x0/0x73 @ 1 [ 6.152183] initcall fc_transport_init+0x0/0x73 returned 0 after 976 usecs [ 6.153104] calling iscsi_transport_init+0x0/0x173 @ 1 [ 6.154010] Loading iSCSI transport class v2.0-870. [ 6.157378] initcall iscsi_transport_init+0x0/0x173 returned 0 after 2929 usecs [ 6.158161] calling sas_transport_init+0x0/0xe1 @ 1 [ 6.161320] initcall sas_transport_init+0x0/0xe1 returned 0 after 1953 usecs [ 6.163017] calling sas_class_init+0x0/0x58 @ 1 [ 6.165074] initcall sas_class_init+0x0/0x58 returned 0 after 976 usecs [ 6.167174] calling srp_transport_init+0x0/0x65 @ 1 [ 6.168165] initcall srp_transport_init+0x0/0x65 returned 0 after 0 usecs [ 6.169078] calling scsi_dh_init+0x0/0x65 @ 1 [ 6.170014] initcall scsi_dh_init+0x0/0x65 returned 0 after 0 usecs [ 6.171011] calling rdac_init+0x0/0x55 @ 1 [ 6.172060] rdac: device handler registered [ 6.173060] initcall rdac_init+0x0/0x55 returned 0 after 976 usecs [ 6.174011] calling libfc_init+0x0/0x96 @ 1 [ 6.176492] initcall libfc_init+0x0/0x96 returned 0 after 976 usecs [ 6.177097] calling fcoe_init+0x0/0x1ab @ 1 [ 6.179229] initcall fcoe_init+0x0/0x1ab returned 0 after 976 usecs [ 6.186083] calling advansys_init+0x0/0x42 @ 1 [ 6.191095] initcall advansys_init+0x0/0x42 returned 0 after 976 usecs [ 6.197071] calling BusLogic_init+0x0/0x5b2 @ 1 [ 6.202179] initcall BusLogic_init+0x0/0x5b2 returned 0 after 0 usecs [ 6.208011] calling adpt_init+0x0/0xb1 @ 1 [ 6.213010] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 6.218010] Detecting Adaptec I2O RAID controllers... [ 6.223035] initcall adpt_init+0x0/0xb1 returned -19 after 9765 usecs [ 6.230014] calling arcmsr_module_init+0x0/0x47 @ 1 [ 6.235592] initcall arcmsr_module_init+0x0/0x47 returned 0 after 0 usecs [ 6.242012] calling ahc_linux_init+0x0/0x8d @ 1 [ 6.247414] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs [ 6.253012] calling ahd_linux_init+0x0/0xa7 @ 1 [ 6.258894] initcall ahd_linux_init+0x0/0xa7 returned 0 after 0 usecs [ 6.265012] calling aac_init+0x0/0x95 @ 1 [ 6.269011] Adaptec aacraid driver 1.1-5[2461]-ms [ 6.274556] initcall aac_init+0x0/0x95 returned 0 after 4882 usecs [ 6.280012] calling aic94xx_init+0x0/0x160 @ 1 [ 6.285011] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.293394] initcall aic94xx_init+0x0/0x160 returned 0 after 7812 usecs [ 6.300016] calling ips_module_init+0x0/0x8e @ 1 [ 6.305495] initcall ips_module_init+0x0/0x8e returned -19 after 0 usecs [ 6.312013] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 6.317095] scsi: Detection failed (no card) [ 6.323013] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 5859 usecs [ 6.330012] calling qla1280_init+0x0/0x42 @ 1 [ 6.335468] initcall qla1280_init+0x0/0x42 returned 0 after 0 usecs [ 6.341013] calling qla2x00_module_init+0x0/0x152 @ 1 [ 6.347537] QLogic Fibre Channel HBA Driver: 8.03.01-k4 [ 6.353200] initcall qla2x00_module_init+0x0/0x152 returned 0 after 6835 usecs [ 6.360013] calling qla4xxx_module_init+0x0/0x108 @ 1 [ 6.366306] iscsi: registered transport (qla4xxx) [ 6.371738] QLogic iSCSI HBA Driver [ 6.375014] initcall qla4xxx_module_init+0x0/0x108 returned 0 after 9765 usecs [ 6.382012] calling lpfc_init+0x0/0xfb @ 1 [ 6.386010] Emulex LightPulse Fibre Channel SCSI driver 8.3.3 [ 6.392010] Copyright(c) 2004-2009 Emulex. All rights reserved. [ 6.398828] initcall lpfc_init+0x0/0xfb returned 0 after 11718 usecs [ 6.405013] calling init_this_scsi_driver+0x0/0x10c @ 1 [ 6.410038] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs [ 6.417012] calling dc395x_module_init+0x0/0x42 @ 1 [ 6.423208] initcall dc395x_module_init+0x0/0x42 returned 0 after 976 usecs [ 6.430013] calling dc390_module_init+0x0/0xbf @ 1 [ 6.435011] DC390: clustering now enabled by default. If you get problems load [ 6.442010] with "disable_clustering=1" and report to maintainers [ 6.449390] initcall dc390_module_init+0x0/0xbf returned 0 after 13671 usecs [ 6.456013] calling megasas_init+0x0/0x180 @ 1 [ 6.461011] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 6.467216] initcall megasas_init+0x0/0x180 returned 0 after 5859 usecs [ 6.473013] calling _scsih_init+0x0/0x117 @ 1 [ 6.478011] mpt2sas version 01.100.03.00 loaded [ 6.483435] initcall _scsih_init+0x0/0x117 returned 0 after 4882 usecs [ 6.490013] calling initio_init_driver+0x0/0x42 @ 1 [ 6.495652] initcall initio_init_driver+0x0/0x42 returned 0 after 0 usecs [ 6.502012] calling tw_init+0x0/0x55 @ 1 [ 6.506011] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 6.513740] initcall tw_init+0x0/0x55 returned 0 after 6835 usecs [ 6.519013] calling twa_init+0x0/0x55 @ 1 [ 6.523011] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. [ 6.531639] initcall twa_init+0x0/0x55 returned 0 after 7812 usecs [ 6.537013] calling ppa_driver_init+0x0/0x4c @ 1 [ 6.542011] ppa: Version 2.07 (for Linux 2.4.x) [ 6.549093] initcall ppa_driver_init+0x0/0x4c returned 0 after 6835 usecs [ 6.556015] calling imm_driver_init+0x0/0x4c @ 1 [ 6.561011] imm: Version 2.05 (for Linux 2.4.0) [ 6.565486] initcall imm_driver_init+0x0/0x4c returned 0 after 4882 usecs [ 6.572012] calling ipr_init+0x0/0x5c @ 1 [ 6.577011] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009) [ 6.584872] initcall ipr_init+0x0/0x5c returned 0 after 6835 usecs [ 6.591013] calling mvs_init+0x0/0x79 @ 1 [ 6.595636] initcall mvs_init+0x0/0x79 returned 0 after 0 usecs [ 6.601013] calling cxgb3i_init_module+0x0/0x5d @ 1 [ 6.606012] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 6.612665] iscsi: registered transport (cxgb3i) [ 6.617054] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 10742 usecs [ 6.624013] calling init_st+0x0/0x129 @ 1 [ 6.628012] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [ 6.635271] initcall init_st+0x0/0x129 returned 0 after 6835 usecs [ 6.641013] calling init_osst+0x0/0x160 @ 1 [ 6.646011] osst :I: Tape driver with OnStream support version 0.99.4 [ 6.646014] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 6.659544] initcall init_osst+0x0/0x160 returned 0 after 12695 usecs [ 6.666013] calling init_sd+0x0/0x125 @ 1 [ 6.671104] initcall init_sd+0x0/0x125 returned 0 after 976 usecs [ 6.677013] calling osd_uld_init+0x0/0xfe @ 1 [ 6.682387] osd: LOADED open-osd 0.1.0 [ 6.686014] initcall osd_uld_init+0x0/0xfe returned 0 after 4882 usecs [ 6.692066] calling ahci_init+0x0/0x42 @ 1 [ 6.697411] initcall ahci_init+0x0/0x42 returned 0 after 0 usecs [ 6.703076] calling piix_init+0x0/0x50 @ 1 [ 6.708112] initcall piix_init+0x0/0x50 returned 0 after 976 usecs [ 6.714017] calling pdc_ata_init+0x0/0x42 @ 1 [ 6.719137] initcall pdc_ata_init+0x0/0x42 returned 0 after 976 usecs [ 6.725013] calling sil_init+0x0/0x42 @ 1 [ 6.730077] initcall sil_init+0x0/0x42 returned 0 after 976 usecs [ 6.736013] calling vsc_sata_init+0x0/0x42 @ 1 [ 6.741126] initcall vsc_sata_init+0x0/0x42 returned 0 after 976 usecs [ 6.747013] calling sis_init+0x0/0x42 @ 1 [ 6.752154] initcall sis_init+0x0/0x42 returned 0 after 976 usecs [ 6.758013] calling pdc_sata_init+0x0/0x42 @ 1 [ 6.763181] initcall pdc_sata_init+0x0/0x42 returned 0 after 976 usecs [ 6.769013] calling nv_init+0x0/0x42 @ 1 [ 6.774132] initcall nv_init+0x0/0x42 returned 0 after 976 usecs [ 6.780013] calling uli_init+0x0/0x42 @ 1 [ 6.784636] initcall uli_init+0x0/0x42 returned 0 after 0 usecs [ 6.790013] calling mv_init+0x0/0x6e @ 1 [ 6.794969] initcall mv_init+0x0/0x6e returned 0 after 976 usecs [ 6.801067] calling adma_ata_init+0x0/0x42 @ 1 [ 6.806356] initcall adma_ata_init+0x0/0x42 returned 0 after 0 usecs [ 6.812073] calling amd_init+0x0/0x42 @ 1 [ 6.817185] pata_amd 0000:00:06.0: version 0.4.1 [ 6.819026] pata_amd 0000:00:06.0: setting latency timer to 64 [ 6.821171] scsi0 : pata_amd [ 6.824443] scsi1 : pata_amd [ 6.825335] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 6.826077] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 6.987045] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 [ 6.993014] ata1.00: 488397168 sectors, multi 1: LBA48 [ 6.998036] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 [ 7.017255] ata1.00: configured for UDMA/100 [ 7.022321] async_waiting @ 2169 [ 7.023013] async_continuing @ 2169 after 0 usec [ 7.025018] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 [ 7.028045] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.029355] sd 0:0:0:0: [sda] Write Protect is off [ 7.030015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.031182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.034265] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 7.138539] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.140606] async_waiting @ 2169 [ 7.141070] async_continuing @ 2169 after 0 usec [ 7.295315] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 [ 7.296035] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 [ 7.303226] ata2.01: configured for UDMA/33 [ 7.305193] async_waiting @ 2169 [ 7.306013] async_continuing @ 2169 after 0 usec [ 7.307255] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 [ 7.310217] work_for_cpu used greatest stack depth: 2448 bytes left [ 7.310296] initcall amd_init+0x0/0x42 returned 0 after 482422 usecs [ 7.310302] calling artop_init+0x0/0x42 @ 1 [ 7.310660] initcall artop_init+0x0/0x42 returned 0 after 0 usecs [ 7.310664] calling atiixp_init+0x0/0x42 @ 1 [ 7.311001] initcall atiixp_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cmd640_init+0x0/0x42 @ 1 [ 7.311005] initcall cmd640_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cmd64x_init+0x0/0x42 @ 1 [ 7.311005] initcall cmd64x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cs5520_init+0x0/0x42 @ 1 [ 7.311005] initcall cs5520_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cy82c693_init+0x0/0x42 @ 1 [ 7.311005] initcall cy82c693_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling efar_init+0x0/0x42 @ 1 [ 7.311005] initcall efar_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling hpt36x_init+0x0/0x42 @ 1 [ 7.311005] initcall hpt36x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling it821x_init+0x0/0x42 @ 1 [ 7.311005] initcall it821x_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling netcell_init+0x0/0x42 @ 1 [ 7.311005] initcall netcell_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ninja32_init+0x0/0x42 @ 1 [ 7.311005] initcall ninja32_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling opti_init+0x0/0x42 @ 1 [ 7.311005] initcall opti_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling marvell_init+0x0/0x42 @ 1 [ 7.311005] initcall marvell_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling mpiix_init+0x0/0x42 @ 1 [ 7.311005] initcall mpiix_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling oldpiix_init+0x0/0x42 @ 1 [ 7.311005] initcall oldpiix_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling radisys_init+0x0/0x42 @ 1 [ 7.311005] initcall radisys_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling rz1000_init+0x0/0x42 @ 1 [ 7.311005] initcall rz1000_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling serverworks_init+0x0/0x42 @ 1 [ 7.311005] initcall serverworks_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling sis_init+0x0/0x42 @ 1 [ 7.311005] initcall sis_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling triflex_init+0x0/0x42 @ 1 [ 7.311005] initcall triflex_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ata_generic_init+0x0/0x42 @ 1 [ 7.311005] initcall ata_generic_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling e1000_init_module+0x0/0xab @ 1 [ 7.311005] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 7.311005] Copyright (c) 1999-2006 Intel Corporation. [ 7.311005] initcall e1000_init_module+0x0/0xab returned 0 after 0 usecs [ 7.311005] calling e1000_init_module+0x0/0x8f @ 1 [ 7.311005] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 7.311005] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 7.311005] initcall e1000_init_module+0x0/0x8f returned 0 after 0 usecs [ 7.311005] calling igb_init_module+0x0/0x7b @ 1 [ 7.311005] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 7.311005] Copyright (c) 2007-2009 Intel Corporation. [ 7.311005] initcall igb_init_module+0x0/0x7b returned 0 after 0 usecs [ 7.311005] calling ixgbe_init_module+0x0/0x7f @ 1 [ 7.311005] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2 [ 7.311005] ixgbe: Copyright (c) 1999-2009 Intel Corporation. [ 7.311005] initcall ixgbe_init_module+0x0/0x7f returned 0 after 0 usecs [ 7.311005] calling ixgb_init_module+0x0/0x71 @ 1 [ 7.311005] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 7.311005] Copyright (c) 1999-2008 Intel Corporation. [ 7.311005] initcall ixgb_init_module+0x0/0x71 returned 0 after 0 usecs [ 7.311005] calling cxgb3_init_module+0x0/0x47 @ 1 [ 7.311005] initcall cxgb3_init_module+0x0/0x47 returned 0 after 0 usecs [ 7.311005] calling atl1_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling atl2_init_module+0x0/0x71 @ 1 [ 7.311005] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 7.311005] Copyright (c) 2007 Atheros Corporation. [ 7.311005] initcall atl2_init_module+0x0/0x71 returned 0 after 0 usecs [ 7.311005] calling atl1e_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1e_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling atl1c_init_module+0x0/0x42 @ 1 [ 7.311005] initcall atl1c_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling bdx_module_init+0x0/0xb0 @ 1 [ 7.311005] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 7.311005] tehuti: Options: hw_csum [ 7.311005] initcall bdx_module_init+0x0/0xb0 returned 0 after 0 usecs [ 7.311005] calling enic_init_module+0x0/0x5c @ 1 [ 7.311005] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933 [ 7.311005] initcall enic_init_module+0x0/0x5c returned 0 after 0 usecs [ 7.311005] calling jme_init_module+0x0/0x55 @ 1 [ 7.311005] jme: JMicron JMC2XX ethernet driver version 1.0.4 [ 7.311005] initcall jme_init_module+0x0/0x55 returned 0 after 0 usecs [ 7.311005] calling be_init_module+0x0/0x9d @ 1 [ 7.311005] initcall be_init_module+0x0/0x9d returned 0 after 0 usecs [ 7.311005] calling plip_init+0x0/0x84 @ 1 [ 7.311005] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient! [ 7.311005] NET3 PLIP version 2.4-parport gniibe@mri.co.jp [ 7.311005] plip0: Parallel port at 0x378, not using IRQ. [ 7.311005] initcall plip_init+0x0/0x84 returned 0 after 0 usecs [ 7.311005] calling rr_init_module+0x0/0x42 @ 1 [ 7.311005] initcall rr_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling happy_meal_probe+0x0/0x42 @ 1 [ 7.311005] initcall happy_meal_probe+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling gem_init+0x0/0x42 @ 1 [ 7.311005] initcall gem_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling cas_init+0x0/0x64 @ 1 [ 7.311005] initcall cas_init+0x0/0x64 returned 0 after 0 usecs [ 7.311005] calling vortex_init+0x0/0xd8 @ 1 [ 7.311005] initcall vortex_init+0x0/0xd8 returned 0 after 0 usecs [ 7.311005] calling ne2k_pci_init+0x0/0x42 @ 1 [ 7.311005] initcall ne2k_pci_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling pcnet32_init_module+0x0/0x154 @ 1 [ 7.311005] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 7.311005] initcall pcnet32_init_module+0x0/0x154 returned 0 after 0 usecs [ 7.311005] calling e100_init_module+0x0/0x81 @ 1 [ 7.311005] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 7.311005] e100: Copyright(c) 1999-2006 Intel Corporation [ 7.311005] initcall e100_init_module+0x0/0x81 returned 0 after 0 usecs [ 7.311005] calling tlan_probe+0x0/0x108 @ 1 [ 7.311005] ThunderLAN driver v1.15a [ 7.311005] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 7.311005] initcall tlan_probe+0x0/0x108 returned -19 after 0 usecs [ 7.311005] calling r6040_init+0x0/0x42 @ 1 [ 7.311005] initcall r6040_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling acenic_init+0x0/0x42 @ 1 [ 7.311005] initcall acenic_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling natsemi_init_mod+0x0/0x42 @ 1 [ 7.311005] initcall natsemi_init_mod+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling fealnx_init+0x0/0x42 @ 1 [ 7.311005] initcall fealnx_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling tg3_init+0x0/0x42 @ 1 [ 7.311005] initcall tg3_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling ks8842_init+0x0/0x39 @ 1 [ 7.311005] initcall ks8842_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling ks8851_init+0x0/0x39 @ 1 [ 7.311005] initcall ks8851_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling velocity_init_module+0x0/0x42 @ 1 [ 7.311005] initcall velocity_init_module+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling starfire_init+0x0/0x42 @ 1 [ 7.311005] initcall starfire_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling davicom_init+0x0/0x83 @ 1 [ 7.311005] initcall davicom_init+0x0/0x83 returned 0 after 0 usecs [ 7.311005] calling cicada_init+0x0/0x65 @ 1 [ 7.311005] initcall cicada_init+0x0/0x65 returned 0 after 0 usecs [ 7.311005] calling vsc82xx_init+0x0/0x65 @ 1 [ 7.311005] initcall vsc82xx_init+0x0/0x65 returned 0 after 0 usecs [ 7.311005] calling broadcom_init+0x0/0x125 @ 1 [ 7.311005] initcall broadcom_init+0x0/0x125 returned 0 after 0 usecs [ 7.311005] calling ip175c_init+0x0/0x39 @ 1 [ 7.311005] initcall ip175c_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling realtek_init+0x0/0x39 @ 1 [ 7.311005] initcall realtek_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling et1011c_init+0x0/0x39 @ 1 [ 7.311005] initcall et1011c_init+0x0/0x39 returned 0 after 0 usecs [ 7.311005] calling fixed_mdio_bus_init+0x0/0xf6 @ 1 [ 7.311005] Fixed MDIO Bus: probed [ 7.311005] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 0 usecs [ 7.311005] calling hamachi_init+0x0/0x42 @ 1 [ 7.311005] initcall hamachi_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling net_olddevs_init+0x0/0x45 @ 1 [ 7.311005] D-Link DE-620 pocket adapter io 0x378, which is busy. [ 7.311005] initcall net_olddevs_init+0x0/0x45 returned 0 after 0 usecs [ 7.311005] calling hp100_module_init+0x0/0x42 @ 1 [ 7.311005] initcall hp100_module_init+0x0/0x42 returned 0 after 0 usecs [ 7.311005] calling b44_init+0x0/0x89 @ 1 [ 7.311005] initcall b44_init+0x0/0x89 returned 0 after 0 usecs [ 7.311005] calling init_nic+0x0/0x42 @ 1 [ 7.312567] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 7.314071] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) [ 7.315021] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 7.316017] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 7.317128] nv_probe: set workaround bit for reversed mac addr [ 7.831213] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 [ 7.832015] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 7.833014] initcall init_nic+0x0/0x42 returned 0 after 511719 usecs [ 7.840071] calling ql3xxx_init_module+0x0/0x42 @ 1 [ 7.846199] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 976 usecs [ 7.853073] calling ppp_init+0x0/0x104 @ 1 [ 7.857067] PPP generic driver version 2.4.2 [ 7.862343] initcall ppp_init+0x0/0x104 returned 0 after 4882 usecs [ 7.869016] calling ppp_async_init+0x0/0x5c @ 1 [ 7.873016] initcall ppp_async_init+0x0/0x5c returned 0 after 0 usecs [ 7.880014] calling ppp_sync_init+0x0/0x5c @ 1 [ 7.884015] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs [ 7.891014] calling pppox_init+0x0/0x39 @ 1 [ 7.895014] NET: Registered protocol family 24 [ 7.899017] initcall pppox_init+0x0/0x39 returned 0 after 3906 usecs [ 7.906014] calling pppoe_init+0x0/0xaf @ 1 [ 7.910051] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs [ 7.916014] calling pppol2tp_init+0x0/0xa8 @ 1 [ 7.921047] PPPoL2TP kernel driver, V1.0 [ 7.925015] initcall pppol2tp_init+0x0/0xa8 returned 0 after 3906 usecs [ 7.931014] calling slip_init+0x0/0xe6 @ 1 [ 7.935013] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 7.945012] CSLIP: code copyright 1989 Regents of the University of California. [ 7.952012] SLIP linefill/keepalive option. [ 7.957024] initcall slip_init+0x0/0xe6 returned 0 after 21484 usecs [ 7.963014] calling dummy_init_module+0x0/0xd8 @ 1 [ 7.969159] initcall dummy_init_module+0x0/0xd8 returned 0 after 976 usecs [ 7.976015] calling macvlan_init_module+0x0/0x79 @ 1 [ 7.981017] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs [ 7.988013] calling de600_init+0x0/0x48 @ 1 [ 7.992034] DE600: port 0x378 busy [ 7.995078] initcall de600_init+0x0/0x48 returned -16 after 2929 usecs [ 8.002019] initcall de600_init+0x0/0x48 returned with error code -16 [ 8.008014] calling dfx_init+0x0/0x47 @ 1 [ 8.013399] initcall dfx_init+0x0/0x47 returned 0 after 0 usecs [ 8.019015] calling cp_init+0x0/0x42 @ 1 [ 8.023572] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 8.024014] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 8.025013] initcall cp_init+0x0/0x42 returned 0 after 1953 usecs [ 8.032072] calling rtl8139_init_module+0x0/0x42 @ 1 [ 8.037502] 8139too Fast Ethernet driver 0.9.28 [ 8.038056] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 8.040671] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11 [ 8.041427] initcall rtl8139_init_module+0x0/0x42 returned 0 after 3906 usecs [ 8.049073] calling atp_init_module+0x0/0xbf @ 1 [ 8.053134] atp.c:v1.09=ac 2002/10/01 Donald Becker [ 8.060101] initcall atp_init_module+0x0/0xbf returned -19 after 6835 usecs [ 8.067079] calling sc92031_init+0x0/0x42 @ 1 [ 8.072497] initcall sc92031_init+0x0/0x42 returned 0 after 0 usecs [ 8.078073] calling eql_init_module+0x0/0x89 @ 1 [ 8.083016] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 8.092665] initcall eql_init_module+0x0/0x89 returned 0 after 8789 usecs [ 8.099015] calling tun_init+0x0/0xb7 @ 1 [ 8.103013] tun: Universal TUN/TAP device driver, 1.6 [ 8.108012] tun: (C) 1999-2004 Max Krasnyansky [ 8.115429] initcall tun_init+0x0/0xb7 returned 0 after 11718 usecs [ 8.121016] calling veth_init+0x0/0x39 @ 1 [ 8.125016] initcall veth_init+0x0/0x39 returned 0 after 0 usecs [ 8.131014] calling rio_init+0x0/0x42 @ 1 [ 8.136422] initcall rio_init+0x0/0x42 returned 0 after 0 usecs [ 8.142015] calling rtl8169_init_module+0x0/0x42 @ 1 [ 8.147805] initcall rtl8169_init_module+0x0/0x42 returned 0 after 0 usecs [ 8.154015] calling amd8111e_init+0x0/0x42 @ 1 [ 8.159616] initcall amd8111e_init+0x0/0x42 returned 0 after 0 usecs [ 8.166015] calling myri10ge_init_module+0x0/0x99 @ 1 [ 8.171013] myri10ge: Version 1.5.0-1.418 [ 8.175540] initcall myri10ge_init_module+0x0/0x99 returned 0 after 3906 usecs [ 8.182014] calling mlx4_init+0x0/0xcb @ 1 [ 8.187263] initcall mlx4_init+0x0/0xcb returned 0 after 0 usecs [ 8.193015] calling mlx4_en_init+0x0/0x39 @ 1 [ 8.198071] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs [ 8.204014] calling enc28j60_init+0x0/0x4a @ 1 [ 8.209200] initcall enc28j60_init+0x0/0x4a returned 0 after 976 usecs [ 8.215015] calling ethoc_init+0x0/0x39 @ 1 [ 8.220377] initcall ethoc_init+0x0/0x39 returned 0 after 0 usecs [ 8.226015] calling dnet_init+0x0/0x39 @ 1 [ 8.231079] initcall dnet_init+0x0/0x39 returned 0 after 976 usecs [ 8.237015] calling ipddp_init_module+0x0/0x48 @ 1 [ 8.242027] ipddp.c:v0.01 8/28/97 Bradford W. Johnson [ 8.250318] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson [ 8.259016] initcall ipddp_init_module+0x0/0x48 returned 0 after 16601 usecs [ 8.266014] calling olympic_pci_init+0x0/0x42 @ 1 [ 8.271460] initcall olympic_pci_init+0x0/0x42 returned 0 after 0 usecs [ 8.278015] calling xl_pci_init+0x0/0x42 @ 1 [ 8.282840] initcall xl_pci_init+0x0/0x42 returned 0 after 0 usecs [ 8.289017] calling arcnet_init+0x0/0x84 @ 1 [ 8.293012] arcnet loaded. [ 8.296015] initcall arcnet_init+0x0/0x84 returned 0 after 2929 usecs [ 8.302014] calling arcnet_rfc1201_init+0x0/0x98 @ 1 [ 8.307012] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 8.314014] initcall arcnet_rfc1201_init+0x0/0x98 returned 0 after 6835 usecs [ 8.321014] calling arcnet_rfc1051_init+0x0/0x6c @ 1 [ 8.326012] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 8.334014] initcall arcnet_rfc1051_init+0x0/0x6c returned 0 after 7812 usecs [ 8.341014] calling arcnet_raw_init+0x0/0x80 @ 1 [ 8.346012] arcnet: raw mode (`r') encapsulation support loaded. [ 8.352015] initcall arcnet_raw_init+0x0/0x80 returned 0 after 5859 usecs [ 8.358014] calling com90io_init+0x0/0x91 @ 1 [ 8.363057] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 8.370012] E-mail me if you actually test this driver, please! [ 8.376014] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 8.384097] initcall com90io_init+0x0/0x91 returned -19 after 20507 usecs [ 8.391019] calling com20020pci_init+0x0/0x57 @ 1 [ 8.396012] arcnet: COM20020 PCI support [ 8.400605] initcall com20020pci_init+0x0/0x57 returned 0 after 3906 usecs [ 8.407015] calling catc_init+0x0/0x5e @ 1 [ 8.412124] usbcore: registered new interface driver catc [ 8.417024] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 8.423015] initcall catc_init+0x0/0x5e returned 0 after 11718 usecs [ 8.429014] calling kaweth_init+0x0/0x42 @ 1 [ 8.434550] usbcore: registered new interface driver kaweth [ 8.440026] initcall kaweth_init+0x0/0x42 returned 0 after 5859 usecs [ 8.446014] calling usb_rtl8150_init+0x0/0x4e @ 1 [ 8.451012] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 8.458595] usbcore: registered new interface driver rtl8150 [ 8.464021] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 12695 usecs [ 8.471014] calling asix_init+0x0/0x42 @ 1 [ 8.475757] usbcore: registered new interface driver asix [ 8.481022] initcall asix_init+0x0/0x42 returned 0 after 5859 usecs [ 8.487014] calling cdc_init+0x0/0x42 @ 1 [ 8.491903] usbcore: registered new interface driver cdc_ether [ 8.497022] initcall cdc_init+0x0/0x42 returned 0 after 5859 usecs [ 8.503014] calling eem_init+0x0/0x42 @ 1 [ 8.508387] usbcore: registered new interface driver cdc_eem [ 8.514021] initcall eem_init+0x0/0x42 returned 0 after 5859 usecs [ 8.520014] calling dm9601_init+0x0/0x42 @ 1 [ 8.524950] usbcore: registered new interface driver dm9601 [ 8.530022] initcall dm9601_init+0x0/0x42 returned 0 after 5859 usecs [ 8.537014] calling smsc95xx_init+0x0/0x42 @ 1 [ 8.541863] usbcore: registered new interface driver smsc95xx [ 8.547023] initcall smsc95xx_init+0x0/0x42 returned 0 after 5859 usecs [ 8.554014] calling usbnet_init+0x0/0x42 @ 1 [ 8.558948] usbcore: registered new interface driver gl620a [ 8.564022] initcall usbnet_init+0x0/0x42 returned 0 after 5859 usecs [ 8.571014] calling plusb_init+0x0/0x42 @ 1 [ 8.575602] usbcore: registered new interface driver plusb [ 8.581033] initcall plusb_init+0x0/0x42 returned 0 after 5859 usecs [ 8.587014] calling rndis_init+0x0/0x42 @ 1 [ 8.592080] usbcore: registered new interface driver rndis_host [ 8.598022] initcall rndis_init+0x0/0x42 returned 0 after 6835 usecs [ 8.604014] calling zaurus_init+0x0/0x42 @ 1 [ 8.609080] usbcore: registered new interface driver zaurus [ 8.614022] initcall zaurus_init+0x0/0x42 returned 0 after 5859 usecs [ 8.621014] calling usbnet_init+0x0/0x52 @ 1 [ 8.625024] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs [ 8.631014] calling usbpn_init+0x0/0x42 @ 1 [ 8.636331] usbcore: registered new interface driver cdc_phonet [ 8.642022] initcall usbpn_init+0x0/0x42 returned 0 after 5859 usecs [ 8.648014] calling ipw_init+0x0/0xad @ 1 [ 8.652012] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq [ 8.659012] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 8.666001] initcall ipw_init+0x0/0xad returned 0 after 13671 usecs [ 8.672016] calling ieee80211_init+0x0/0xda @ 1 [ 8.676044] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 8.683013] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 8.691014] initcall ieee80211_init+0x0/0xda returned 0 after 14648 usecs [ 8.698014] calling strip_init_driver+0x0/0x8e @ 1 [ 8.703024] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) [ 8.710041] initcall strip_init_driver+0x0/0x8e returned 0 after 6835 usecs [ 8.717015] calling init_orinoco+0x0/0x42 @ 1 [ 8.721013] orinoco 0.15 (David Gibson , Pavel Roskin , et al) [ 8.731015] initcall init_orinoco+0x0/0x42 returned 0 after 9765 usecs [ 8.737014] calling orinoco_plx_init+0x0/0x55 @ 1 [ 8.742013] orinoco_plx 0.15 (Pavel Roskin , David Gibson , Daniel Barlow ) [ 8.755327] initcall orinoco_plx_init+0x0/0x55 returned 0 after 12695 usecs [ 8.762016] calling orinoco_pci_init+0x0/0x55 @ 1 [ 8.767013] orinoco_pci 0.15 (Pavel Roskin , David Gibson & Jean Tourrilhes ) [ 8.780062] initcall orinoco_pci_init+0x0/0x55 returned 0 after 12695 usecs [ 8.787015] calling orinoco_tmd_init+0x0/0x55 @ 1 [ 8.791013] orinoco_tmd 0.15 (Joerg Dorchain ) [ 8.798396] initcall orinoco_tmd_init+0x0/0x55 returned 0 after 6835 usecs [ 8.805017] calling airo_init_module+0x0/0x110 @ 1 [ 8.810034] airo(): Probing for PCI adapters [ 8.814854] airo(): Finished probing for PCI adapters [ 8.819016] initcall airo_init_module+0x0/0x110 returned 0 after 8789 usecs [ 8.826015] calling atmel_init_module+0x0/0x42 @ 1 [ 8.832150] initcall atmel_init_module+0x0/0x42 returned 0 after 976 usecs [ 8.839016] calling at76_mod_init+0x0/0x99 @ 1 [ 8.843013] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 8.849590] usbcore: registered new interface driver at76c50x-usb [ 8.855163] initcall at76_mod_init+0x0/0x99 returned 0 after 11718 usecs [ 8.862015] calling prism54_module_init+0x0/0x5c @ 1 [ 8.867013] Loaded prism54 driver, version 1.2 [ 8.872456] initcall prism54_module_init+0x0/0x5c returned 0 after 4882 usecs [ 8.879015] calling hostap_init+0x0/0x6c @ 1 [ 8.884032] initcall hostap_init+0x0/0x6c returned 0 after 0 usecs [ 8.890015] calling b43_init+0x0/0x7b @ 1 [ 8.894685] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 8.901016] initcall b43_init+0x0/0x7b returned 0 after 6835 usecs [ 8.907014] calling b43legacy_init+0x0/0x82 @ 1 [ 8.912829] Broadcom 43xx-legacy driver loaded [ Features: PLD, Firmware-ID: FW10 ] [ 8.920016] initcall b43legacy_init+0x0/0x82 returned 0 after 7812 usecs [ 8.927015] calling rtl8180_init+0x0/0x42 @ 1 [ 8.932104] initcall rtl8180_init+0x0/0x42 returned 0 after 976 usecs [ 8.938016] calling rtl8187_init+0x0/0x42 @ 1 [ 8.943368] usbcore: registered new interface driver rtl8187 [ 8.949022] initcall rtl8187_init+0x0/0x42 returned 0 after 5859 usecs [ 8.955015] calling rndis_wlan_init+0x0/0x42 @ 1 [ 8.960632] usbcore: registered new interface driver rndis_wlan [ 8.966022] initcall rndis_wlan_init+0x0/0x42 returned 0 after 5859 usecs [ 8.973015] calling zd1201_init+0x0/0x42 @ 1 [ 8.978078] usbcore: registered new interface driver zd1201 [ 8.983022] initcall zd1201_init+0x0/0x42 returned 0 after 5859 usecs [ 8.990015] calling lbs_init_module+0x0/0x5d @ 1 [ 8.994032] initcall lbs_init_module+0x0/0x5d returned 0 after 0 usecs [ 9.001015] calling if_usb_init_module+0x0/0x42 @ 1 [ 9.006709] usbcore: registered new interface driver usb8xxx [ 9.012022] initcall if_usb_init_module+0x0/0x42 returned 0 after 5859 usecs [ 9.019015] calling if_spi_init_module+0x0/0x45 @ 1 [ 9.024013] libertas_spi: Libertas SPI driver [ 9.029127] initcall if_spi_init_module+0x0/0x45 returned 0 after 4882 usecs [ 9.036016] calling lbtf_init_module+0x0/0x6c @ 1 [ 9.041166] initcall lbtf_init_module+0x0/0x6c returned 0 after 0 usecs [ 9.047017] calling if_usb_init_module+0x0/0x42 @ 1 [ 9.053212] usbcore: registered new interface driver lbtf_usb [ 9.058023] initcall if_usb_init_module+0x0/0x42 returned 0 after 6835 usecs [ 9.066017] calling mwl8k_init+0x0/0x42 @ 1 [ 9.070697] initcall mwl8k_init+0x0/0x42 returned 0 after 0 usecs [ 9.076015] calling init_ath5k_pci+0x0/0x5e @ 1 [ 9.081821] initcall init_ath5k_pci+0x0/0x5e returned 0 after 0 usecs [ 9.088016] calling ath9k_init+0x0/0x95 @ 1 [ 9.092953] initcall ath9k_init+0x0/0x95 returned 0 after 0 usecs [ 9.099015] calling ar9170_init+0x0/0x42 @ 1 [ 9.103773] usbcore: registered new interface driver ar9170usb [ 9.109022] initcall ar9170_init+0x0/0x42 returned 0 after 5859 usecs [ 9.116015] calling init_mac80211_hwsim+0x0/0x535 @ 1 [ 9.121570] mac80211_hwsim: Initializing radio 0 [ 9.129267] phy0: Selected rate control algorithm 'minstrel' [ 9.136405] phy0: hwaddr 02:00:00:00:00:00 registered [ 9.141127] mac80211_hwsim: Initializing radio 1 [ 9.148297] phy1: Selected rate control algorithm 'minstrel' [ 9.155186] phy1: hwaddr 02:00:00:00:01:00 registered [ 9.160936] initcall init_mac80211_hwsim+0x0/0x535 returned 0 after 39062 usecs [ 9.168017] calling wl12xx_init+0x0/0x57 @ 1 [ 9.173080] initcall wl12xx_init+0x0/0x57 returned 0 after 976 usecs [ 9.179016] calling usb_irda_init+0x0/0x65 @ 1 [ 9.184348] usbcore: registered new interface driver irda-usb [ 9.190022] USB IrDA support registered [ 9.193016] initcall usb_irda_init+0x0/0x65 returned 0 after 8789 usecs [ 9.200015] calling stir_init+0x0/0x42 @ 1 [ 9.205122] usbcore: registered new interface driver stir4200 [ 9.210022] initcall stir_init+0x0/0x42 returned 0 after 5859 usecs [ 9.217015] calling nsc_ircc_init+0x0/0x1fd @ 1 [ 9.221014] Platform driver 'nsc-ircc' needs updating - please use dev_pm_ops [ 9.229322] initcall nsc_ircc_init+0x0/0x1fd returned -19 after 7812 usecs [ 9.236017] calling w83977af_init+0x0/0x74 @ 1 [ 9.241072] initcall w83977af_init+0x0/0x74 returned -19 after 0 usecs [ 9.247015] calling smsc_ircc_init+0x0/0x87 @ 1 [ 9.252013] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops [ 9.260484] initcall smsc_ircc_init+0x0/0x87 returned -19 after 7812 usecs [ 9.267015] calling ali_ircc_init+0x0/0x196 @ 1 [ 9.272013] Platform driver 'ali-ircc' needs updating - please use dev_pm_ops [ 9.279555] initcall ali_ircc_init+0x0/0x196 returned -19 after 6835 usecs [ 9.286015] calling vlsi_mod_init+0x0/0x151 @ 1 [ 9.291809] initcall vlsi_mod_init+0x0/0x151 returned 0 after 0 usecs [ 9.298015] calling irtty_sir_init+0x0/0x65 @ 1 [ 9.302016] initcall irtty_sir_init+0x0/0x65 returned 0 after 0 usecs [ 9.309014] calling sir_wq_init+0x0/0x5c @ 1 [ 9.313865] initcall sir_wq_init+0x0/0x5c returned 0 after 0 usecs [ 9.320016] calling tekram_sir_init+0x0/0x52 @ 1 [ 9.324082] initcall tekram_sir_init+0x0/0x52 returned 0 after 0 usecs [ 9.331015] calling actisys_sir_init+0x0/0x69 @ 1 [ 9.336018] initcall actisys_sir_init+0x0/0x69 returned 0 after 0 usecs [ 9.342015] calling litelink_sir_init+0x0/0x39 @ 1 [ 9.347017] initcall litelink_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.354015] calling mcp2120_sir_init+0x0/0x39 @ 1 [ 9.359017] initcall mcp2120_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.365015] calling ma600_sir_init+0x0/0x39 @ 1 [ 9.370017] initcall ma600_sir_init+0x0/0x39 returned 0 after 0 usecs [ 9.376015] calling toim3232_sir_init+0x0/0x52 @ 1 [ 9.381017] initcall toim3232_sir_init+0x0/0x52 returned 0 after 0 usecs [ 9.388015] calling ksdazzle_init+0x0/0x42 @ 1 [ 9.393357] usbcore: registered new interface driver ksdazzle-sir [ 9.399022] initcall ksdazzle_init+0x0/0x42 returned 0 after 5859 usecs [ 9.406015] calling init_netconsole+0x0/0x184 @ 1 [ 9.410065] console [netcon0] enabled [ 9.414014] netconsole: network logging started [ 9.419015] initcall init_netconsole+0x0/0x184 returned 0 after 8789 usecs [ 9.426014] calling niu_init+0x0/0x64 @ 1 [ 9.430518] initcall niu_init+0x0/0x64 returned 0 after 0 usecs [ 9.436015] calling efx_init_module+0x0/0xfd @ 1 [ 9.441014] Solarflare NET driver v2.3 [ 9.448066] initcall efx_init_module+0x0/0xfd returned 0 after 6835 usecs [ 9.454016] calling fusion_init+0x0/0x164 @ 1 [ 9.459014] Fusion MPT base driver 3.04.10 [ 9.463013] Copyright (c) 1999-2008 LSI Corporation [ 9.468060] initcall fusion_init+0x0/0x164 returned 0 after 8789 usecs [ 9.474015] calling mptsas_init+0x0/0x130 @ 1 [ 9.479014] Fusion MPT SAS Host driver 3.04.10 [ 9.484203] initcall mptsas_init+0x0/0x130 returned 0 after 4882 usecs [ 9.490015] calling mptctl_init+0x0/0x141 @ 1 [ 9.495014] Fusion MPT misc device (ioctl) driver 3.04.10 [ 9.501081] mptctl: Registered with Fusion MPT base driver [ 9.506016] mptctl: /dev/mptctl @ (major,minor=10,220) [ 9.511016] initcall mptctl_init+0x0/0x141 returned 0 after 15625 usecs [ 9.518015] calling pcilynx_init+0x0/0x62 @ 1 [ 9.523234] initcall pcilynx_init+0x0/0x62 returned 0 after 976 usecs [ 9.529015] calling ohci1394_init+0x0/0x42 @ 1 [ 9.534628] initcall ohci1394_init+0x0/0x42 returned 0 after 0 usecs [ 9.541016] calling video1394_init_module+0x0/0xfc @ 1 [ 9.546586] video1394: Installed video1394 module [ 9.551016] initcall video1394_init_module+0x0/0xfc returned 0 after 4882 usecs [ 9.558015] calling init_raw1394+0x0/0x11a @ 1 [ 9.563619] ieee1394: raw1394: /dev/raw1394 device initialized [ 9.569896] initcall init_raw1394+0x0/0x11a returned 0 after 5859 usecs [ 9.576016] calling dv1394_init_module+0x0/0xc5 @ 1 [ 9.581851] initcall dv1394_init_module+0x0/0xc5 returned 0 after 0 usecs [ 9.588015] calling ether1394_init_module+0x0/0x96 @ 1 [ 9.594640] initcall ether1394_init_module+0x0/0x96 returned 0 after 976 usecs [ 9.602016] calling uio_init+0x0/0x2d @ 1 [ 9.606015] initcall uio_init+0x0/0x2d returned 0 after 0 usecs [ 9.612015] calling hilscher_init_module+0x0/0x42 @ 1 [ 9.617722] initcall hilscher_init_module+0x0/0x42 returned 0 after 0 usecs [ 9.624016] calling uio_pdrv_init+0x0/0x39 @ 1 [ 9.629594] initcall uio_pdrv_init+0x0/0x39 returned 0 after 0 usecs [ 9.635016] calling uio_pdrv_genirq_init+0x0/0x39 @ 1 [ 9.641467] initcall uio_pdrv_genirq_init+0x0/0x39 returned 0 after 0 usecs [ 9.648016] calling smx_ce_init_module+0x0/0x39 @ 1 [ 9.653761] initcall smx_ce_init_module+0x0/0x39 returned 0 after 0 usecs [ 9.660015] calling aectc_init+0x0/0x42 @ 1 [ 9.665218] initcall aectc_init+0x0/0x42 returned 0 after 976 usecs [ 9.671017] calling butterfly_init+0x0/0x39 @ 1 [ 9.785078] parport0: AVR Butterfly [ 9.788019] initcall butterfly_init+0x0/0x39 returned 0 after 109375 usecs [ 9.795016] calling init_spi_lm70llp+0x0/0x39 @ 1 [ 9.800026] parport0: cannot grant exclusive access for device spi-lm70llp [ 9.807022] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 9.812016] initcall init_spi_lm70llp+0x0/0x39 returned 0 after 11718 usecs [ 9.819015] calling spidev_init+0x0/0xbf @ 1 [ 9.824508] initcall spidev_init+0x0/0xbf returned 0 after 0 usecs [ 9.830017] calling tle62x0_init+0x0/0x39 @ 1 [ 9.835769] initcall tle62x0_init+0x0/0x39 returned 0 after 0 usecs [ 9.842019] calling nonstatic_sysfs_init+0x0/0x39 @ 1 [ 9.847068] initcall nonstatic_sysfs_init+0x0/0x39 returned 0 after 0 usecs [ 9.854015] calling yenta_socket_init+0x0/0x42 @ 1 [ 9.859506] initcall yenta_socket_init+0x0/0x42 returned 0 after 0 usecs [ 9.866015] calling uwb_subsys_init+0x0/0x77 @ 1 [ 9.871298] initcall uwb_subsys_init+0x0/0x77 returned 0 after 976 usecs [ 9.878016] calling hwarc_driver_init+0x0/0x42 @ 1 [ 9.883271] usbcore: registered new interface driver hwa-rc [ 9.888023] initcall hwarc_driver_init+0x0/0x42 returned 0 after 5859 usecs [ 9.895015] calling mon_init+0x0/0x141 @ 1 [ 9.900403] initcall mon_init+0x0/0x141 returned 0 after 0 usecs [ 9.907019] calling ehci_hcd_init+0x0/0x10e @ 1 [ 9.911014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.918015] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 9.924432] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table [ 9.925016] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! [ 9.927021] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 [ 9.929187] initcall ehci_hcd_init+0x0/0x10e returned 0 after 17578 usecs [ 9.936016] calling oxu_module_init+0x0/0x39 @ 1 [ 9.941078] initcall oxu_module_init+0x0/0x39 returned 0 after 976 usecs [ 9.947016] calling isp116x_init+0x0/0x67 @ 1 [ 9.952014] 116x: driver isp116x-hcd, 03 Nov 2005 [ 9.957307] initcall isp116x_init+0x0/0x67 returned 0 after 4882 usecs [ 9.963016] calling ohci_hcd_mod_init+0x0/0x101 @ 1 [ 9.968014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.975014] ohci_hcd: block sizes: ed 80 td 96 [ 9.979643] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table [ 9.980015] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! [ 9.981018] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 [ 9.982261] initcall ohci_hcd_mod_init+0x0/0x101 returned 0 after 13671 usecs [ 9.989071] calling uhci_hcd_init+0x0/0x15a @ 1 [ 9.994144] uhci_hcd: USB Universal Host Controller Interface driver [ 10.002157] initcall uhci_hcd_init+0x0/0x15a returned 0 after 7812 usecs [ 10.008086] calling xhci_hcd_init+0x0/0x52 @ 1 [ 10.013889] initcall xhci_hcd_init+0x0/0x52 returned 0 after 0 usecs [ 10.020074] calling sl811h_init+0x0/0x67 @ 1 [ 10.024018] sl811: driver sl811-hcd, 19 May 2005 [ 10.029688] initcall sl811h_init+0x0/0x67 returned 0 after 4882 usecs [ 10.036016] calling r8a66597_init+0x0/0x67 @ 1 [ 10.040014] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 [ 10.046431] initcall r8a66597_init+0x0/0x67 returned 0 after 5859 usecs [ 10.053016] calling isp1760_init+0x0/0x76 @ 1 [ 10.059304] initcall isp1760_init+0x0/0x76 returned 0 after 1953 usecs [ 10.066016] calling wusbcore_init+0x0/0x9a @ 1 [ 10.070766] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs [ 10.077017] calling cbaf_driver_init+0x0/0x42 @ 1 [ 10.082252] usbcore: registered new interface driver wusb-cbaf [ 10.088023] initcall cbaf_driver_init+0x0/0x42 returned 0 after 6835 usecs [ 10.095015] calling acm_init+0x0/0x128 @ 1 [ 10.099534] usbcore: registered new interface driver cdc_acm [ 10.105020] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 10.113016] initcall acm_init+0x0/0x128 returned 0 after 13671 usecs [ 10.120015] calling usblp_init+0x0/0x42 @ 1 [ 10.124728] usbcore: registered new interface driver usblp [ 10.130034] initcall usblp_init+0x0/0x42 returned 0 after 5859 usecs [ 10.136015] calling wdm_init+0x0/0x42 @ 1 [ 10.141104] usbcore: registered new interface driver cdc_wdm [ 10.146022] initcall wdm_init+0x0/0x42 returned 0 after 5859 usecs [ 10.152016] calling usb_usual_init+0x0/0x66 @ 1 [ 10.158215] usbcore: registered new interface driver libusual [ 10.163026] initcall usb_usual_init+0x0/0x66 returned 0 after 6835 usecs [ 10.170016] calling usb_mdc800_init+0x0/0x32e @ 1 [ 10.175851] usbcore: registered new interface driver mdc800 [ 10.181021] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 10.189016] initcall usb_mdc800_init+0x0/0x32e returned 0 after 13671 usecs [ 10.196015] calling microtek_drv_init+0x0/0x42 @ 1 [ 10.201292] usbcore: registered new interface driver microtekX6 [ 10.207023] initcall microtek_drv_init+0x0/0x42 returned 0 after 6835 usecs [ 10.214016] calling adu_init+0x0/0xba @ 1 [ 10.218014] drivers/usb/misc/adutux.c : adu_init : enter [ 10.224136] usbcore: registered new interface driver adutux [ 10.229021] adutux adutux (see www.ontrak.net) v0.0.13 [ 10.234014] adutux is an experimental driver. Use at your own risk [ 10.241014] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 [ 10.247016] initcall adu_init+0x0/0xba returned 0 after 28320 usecs [ 10.254015] calling berry_init+0x0/0x42 @ 1 [ 10.258839] usbcore: registered new interface driver berry_charge [ 10.264023] initcall berry_init+0x0/0x42 returned 0 after 5859 usecs [ 10.271016] calling cypress_init+0x0/0x60 @ 1 [ 10.276081] usbcore: registered new interface driver cypress_cy7c63 [ 10.282023] initcall cypress_init+0x0/0x60 returned 0 after 6835 usecs [ 10.288015] calling emi26_init+0x0/0x42 @ 1 [ 10.293555] usbcore: registered new interface driver emi26 - firmware loader [ 10.300022] initcall emi26_init+0x0/0x42 returned 0 after 6835 usecs [ 10.307018] calling usb_idmouse_init+0x0/0x6c @ 1 [ 10.311014] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver [ 10.318206] usbcore: registered new interface driver idmouse [ 10.323023] initcall usb_idmouse_init+0x0/0x6c returned 0 after 11718 usecs [ 10.330016] calling iowarrior_init+0x0/0x42 @ 1 [ 10.335826] usbcore: registered new interface driver iowarrior [ 10.341023] initcall iowarrior_init+0x0/0x42 returned 0 after 5859 usecs [ 10.348016] calling ld_usb_init+0x0/0x60 @ 1 [ 10.353081] usbcore: registered new interface driver ldusb [ 10.358025] initcall ld_usb_init+0x0/0x60 returned 0 after 5859 usecs [ 10.365016] calling lego_usb_tower_init+0x0/0xaf @ 1 [ 10.370014] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter [ 10.377081] usbcore: registered new interface driver legousbtower [ 10.383021] legousbtower: v0.96:LEGO USB Tower Driver [ 10.388015] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0 [ 10.396016] initcall lego_usb_tower_init+0x0/0xaf returned 0 after 25390 usecs [ 10.403015] calling usb_rio_init+0x0/0x5e @ 1 [ 10.408269] usbcore: registered new interface driver rio500 [ 10.413021] rio500: v1.1:USB Rio 500 driver [ 10.418016] initcall usb_rio_init+0x0/0x5e returned 0 after 10742 usecs [ 10.424015] calling usbtest_init+0x0/0x66 @ 1 [ 10.429455] usbcore: registered new interface driver usbtest [ 10.435023] initcall usbtest_init+0x0/0x66 returned 0 after 5859 usecs [ 10.441016] calling uss720_init+0x0/0x88 @ 1 [ 10.446368] usbcore: registered new interface driver uss720 [ 10.451021] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 10.461014] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 10.468014] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 10.475014] uss720: If you just want to connect to a printer, use usblp instead [ 10.483016] initcall uss720_init+0x0/0x88 returned 0 after 36132 usecs [ 10.489015] calling usb_sisusb_init+0x0/0x47 @ 1 [ 10.494727] usbcore: registered new interface driver sisusb [ 10.500023] initcall usb_sisusb_init+0x0/0x47 returned 0 after 5859 usecs [ 10.507016] calling i8042_init+0x0/0x143 @ 1 [ 10.514615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.520062] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.525032] initcall i8042_init+0x0/0x143 returned 0 after 13671 usecs [ 10.531017] calling serport_init+0x0/0x5a @ 1 [ 10.536017] initcall serport_init+0x0/0x5a returned 0 after 0 usecs [ 10.542016] calling pcips2_init+0x0/0x42 @ 1 [ 10.547291] initcall pcips2_init+0x0/0x42 returned 0 after 976 usecs [ 10.553017] calling serio_raw_init+0x0/0x42 @ 1 [ 10.558671] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs [ 10.565016] calling emu_init+0x0/0x42 @ 1 [ 10.569612] initcall emu_init+0x0/0x42 returned 0 after 0 usecs [ 10.575016] calling ns558_init+0x0/0x60 @ 1 [ 10.588423] initcall ns558_init+0x0/0x60 returned -19 after 8789 usecs [ 10.595016] calling mousedev_init+0x0/0x87 @ 1 [ 10.601211] mice: PS/2 mouse device common for all mice [ 10.606020] initcall mousedev_init+0x0/0x87 returned 0 after 5859 usecs [ 10.613016] calling evdev_init+0x0/0x39 @ 1 [ 10.617925] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs [ 10.624017] calling evbug_init+0x0/0x39 @ 1 [ 10.628022] evbug.c: Connected device: input0 (Macintosh mouse button emulation at unknown) [ 10.636018] initcall evbug_init+0x0/0x39 returned 0 after 7812 usecs [ 10.643016] calling atkbd_init+0x0/0x4e @ 1 [ 10.647689] initcall atkbd_init+0x0/0x4e returned 0 after 0 usecs [ 10.653016] calling lm8323_init+0x0/0x3b @ 1 [ 10.658545] i2c-core: driver [lm8323] registered [ 10.663022] initcall lm8323_init+0x0/0x3b returned 0 after 4882 usecs [ 10.669016] calling nkbd_init+0x0/0x42 @ 1 [ 10.674174] input: AT Translated Set 2 keyboard as /class/input/input1 [ 10.676296] initcall nkbd_init+0x0/0x42 returned 0 after 2929 usecs [ 10.682138] calling skbd_init+0x0/0x42 @ 1 [ 10.687419] evbug.c: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 10.688277] initcall skbd_init+0x0/0x42 returned 0 after 1953 usecs [ 10.695081] calling xtkbd_init+0x0/0x42 @ 1 [ 10.700155] initcall xtkbd_init+0x0/0x42 returned 0 after 976 usecs [ 10.706088] calling a3d_init+0x0/0x42 @ 1 [ 10.711105] initcall a3d_init+0x0/0x42 returned 0 after 976 usecs [ 10.717076] calling cobra_init+0x0/0x42 @ 1 [ 10.721950] initcall cobra_init+0x0/0x42 returned 0 after 0 usecs [ 10.728021] calling gc_init+0x0/0xe8 @ 1 [ 10.732017] initcall gc_init+0x0/0xe8 returned -19 after 0 usecs [ 10.738016] calling gf2k_init+0x0/0x42 @ 1 [ 10.742638] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs [ 10.748017] calling grip_init+0x0/0x42 @ 1 [ 10.753212] initcall grip_init+0x0/0x42 returned 0 after 976 usecs [ 10.759017] calling grip_init+0x0/0x42 @ 1 [ 10.763964] initcall grip_init+0x0/0x42 returned 0 after 0 usecs [ 10.770018] calling iforce_init+0x0/0x42 @ 1 [ 10.774707] usbcore: registered new interface driver iforce [ 10.780023] initcall iforce_init+0x0/0x42 returned 0 after 5859 usecs [ 10.786016] calling interact_init+0x0/0x42 @ 1 [ 10.791638] initcall interact_init+0x0/0x42 returned 0 after 0 usecs [ 10.798017] calling joydump_init+0x0/0x42 @ 1 [ 10.802817] initcall joydump_init+0x0/0x42 returned 0 after 0 usecs [ 10.809017] calling sw_init+0x0/0x42 @ 1 [ 10.813478] initcall sw_init+0x0/0x42 returned 0 after 0 usecs [ 10.819017] calling spaceball_init+0x0/0x42 @ 1 [ 10.824329] initcall spaceball_init+0x0/0x42 returned 0 after 976 usecs [ 10.830017] calling stinger_init+0x0/0x42 @ 1 [ 10.835610] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs [ 10.842066] calling tmdc_init+0x0/0x42 @ 1 [ 10.846661] initcall tmdc_init+0x0/0x42 returned 0 after 0 usecs [ 10.852077] calling tgfx_init+0x0/0xe7 @ 1 [ 10.857013] initcall tgfx_init+0x0/0xe7 returned -19 after 0 usecs [ 10.863066] calling twidjoy_init+0x0/0x42 @ 1 [ 10.868168] initcall twidjoy_init+0x0/0x42 returned 0 after 976 usecs [ 10.874019] calling usb_xpad_init+0x0/0x5e @ 1 [ 10.879507] usbcore: registered new interface driver xpad [ 10.884021] xpad: X-Box pad driver [ 10.888017] initcall usb_xpad_init+0x0/0x5e returned 0 after 8789 usecs [ 10.894016] calling usb_acecad_init+0x0/0x5e @ 1 [ 10.900068] usbcore: registered new interface driver usb_acecad [ 10.906021] acecad: v3.2:USB Acecad Flair tablet driver [ 10.911017] initcall usb_acecad_init+0x0/0x5e returned 0 after 11718 usecs [ 10.918016] calling aiptek_init+0x0/0x6c @ 1 [ 10.922833] usbcore: registered new interface driver aiptek [ 10.928021] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) [ 10.936015] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen [ 10.943017] initcall aiptek_init+0x0/0x6c returned 0 after 20507 usecs [ 10.950016] calling wacom_init+0x0/0x6a @ 1 [ 10.954891] usbcore: registered new interface driver wacom [ 10.960021] wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver [ 10.967017] initcall wacom_init+0x0/0x6a returned 0 after 12695 usecs [ 10.973016] calling ad7877_init+0x0/0x39 @ 1 [ 10.978432] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs [ 10.984017] calling ad7879_init+0x0/0x3b @ 1 [ 10.989333] i2c-core: driver [ad7879] registered [ 10.993021] initcall ad7879_init+0x0/0x3b returned 0 after 3906 usecs [ 11.000016] calling ads7846_init+0x0/0x39 @ 1 [ 11.005197] initcall ads7846_init+0x0/0x39 returned 0 after 976 usecs [ 11.011066] calling eeti_ts_init+0x0/0x3b @ 1 [ 11.016548] i2c-core: driver [eeti_ts] registered [ 11.021079] initcall eeti_ts_init+0x0/0x3b returned 0 after 4882 usecs [ 11.027098] calling inexio_init+0x0/0x42 @ 1 [ 11.032684] initcall inexio_init+0x0/0x42 returned 0 after 0 usecs [ 11.038021] calling mtouch_init+0x0/0x42 @ 1 [ 11.043595] initcall mtouch_init+0x0/0x42 returned 0 after 0 usecs [ 11.049017] calling usbtouch_init+0x0/0x42 @ 1 [ 11.054683] usbcore: registered new interface driver usbtouchscreen [ 11.060023] initcall usbtouch_init+0x0/0x42 returned 0 after 5859 usecs [ 11.067016] calling pm_init+0x0/0x42 @ 1 [ 11.071971] initcall pm_init+0x0/0x42 returned 0 after 0 usecs [ 11.077017] calling ati_remote_init+0x0/0x70 @ 1 [ 11.082871] usbcore: registered new interface driver ati_remote [ 11.088021] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control [ 11.094017] initcall ati_remote_init+0x0/0x70 returned 0 after 11718 usecs [ 11.101016] calling ati_remote2_init+0x0/0x70 @ 1 [ 11.106406] usbcore: registered new interface driver ati_remote2 [ 11.112021] ati_remote2: ATI/Philips USB RF remote driver 0.3 [ 11.118017] initcall ati_remote2_init+0x0/0x70 returned 0 after 11718 usecs [ 11.125016] calling cm109_init+0x0/0x69 @ 1 [ 11.129015] cm109: Keymap for Komunikate KIP1000 phone loaded [ 11.135514] usbcore: registered new interface driver cm109 [ 11.141021] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 11.147017] initcall cm109_init+0x0/0x69 returned 0 after 17578 usecs [ 11.154017] calling usb_keyspan_init+0x0/0x60 @ 1 [ 11.159184] usbcore: registered new interface driver keyspan_remote [ 11.165071] initcall usb_keyspan_init+0x0/0x60 returned 0 after 6835 usecs [ 11.172071] calling pcf50633_input_init+0x0/0x39 @ 1 [ 11.177954] initcall pcf50633_input_init+0x0/0x39 returned 0 after 0 usecs [ 11.184075] calling pcspkr_init+0x0/0x39 @ 1 [ 11.189872] input: PC Speaker as /class/input/input2 [ 11.195427] evbug.c: Connected device: input2 (PC Speaker at isa0061/input0) [ 11.202856] initcall pcspkr_init+0x0/0x39 returned 0 after 12695 usecs [ 11.209018] calling twl4030_pwrbutton_init+0x0/0x39 @ 1 [ 11.215130] initcall twl4030_pwrbutton_init+0x0/0x39 returned 0 after 976 usecs [ 11.222018] calling uinput_init+0x0/0x39 @ 1 [ 11.227205] initcall uinput_init+0x0/0x39 returned 0 after 976 usecs [ 11.233067] calling yealink_dev_init+0x0/0x5e @ 1 [ 11.238853] usbcore: registered new interface driver yealink [ 11.244081] yealink: yld-20051230:Yealink phone driver [ 11.249105] initcall yealink_dev_init+0x0/0x5e returned 0 after 10742 usecs [ 11.256066] calling xenkbd_init+0x0/0x6b @ 1 [ 11.261020] initcall xenkbd_init+0x0/0x6b returned -19 after 0 usecs [ 11.267016] calling cmos_init+0x0/0x55 @ 1 [ 11.272477] rtc_cmos: dev (254:0) [ 11.275037] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 11.282081] rtc0: alarms up to one day, 114 bytes nvram [ 11.287918] initcall cmos_init+0x0/0x55 returned 0 after 15625 usecs [ 11.294018] calling ds1286_init+0x0/0x39 @ 1 [ 11.299067] initcall ds1286_init+0x0/0x39 returned 0 after 976 usecs [ 11.305017] calling ds1305_init+0x0/0x39 @ 1 [ 11.310120] initcall ds1305_init+0x0/0x39 returned 0 after 976 usecs [ 11.316017] calling ds1307_init+0x0/0x3b @ 1 [ 11.321250] i2c-core: driver [rtc-ds1307] registered [ 11.326023] initcall ds1307_init+0x0/0x3b returned 0 after 5859 usecs [ 11.332017] calling ds1390_init+0x0/0x39 @ 1 [ 11.337379] initcall ds1390_init+0x0/0x39 returned 0 after 0 usecs [ 11.343018] calling ds1511_rtc_init+0x0/0x39 @ 1 [ 11.348645] initcall ds1511_rtc_init+0x0/0x39 returned 0 after 0 usecs [ 11.355017] calling ds1553_init+0x0/0x39 @ 1 [ 11.359901] initcall ds1553_init+0x0/0x39 returned 0 after 0 usecs [ 11.366017] calling ds1672_init+0x0/0x3b @ 1 [ 11.370801] i2c-core: driver [rtc-ds1672] registered [ 11.375021] initcall ds1672_init+0x0/0x3b returned 0 after 4882 usecs [ 11.382017] calling ds1742_init+0x0/0x39 @ 1 [ 11.386945] initcall ds1742_init+0x0/0x39 returned 0 after 0 usecs [ 11.393021] calling ds3234_init+0x0/0x39 @ 1 [ 11.397859] initcall ds3234_init+0x0/0x39 returned 0 after 0 usecs [ 11.404017] calling isl1208_init+0x0/0x3b @ 1 [ 11.408845] i2c-core: driver [rtc-isl1208] registered [ 11.413021] initcall isl1208_init+0x0/0x3b returned 0 after 4882 usecs [ 11.420017] calling m41t80_rtc_init+0x0/0x3b @ 1 [ 11.425492] i2c-core: driver [rtc-m41t80] registered [ 11.430021] initcall m41t80_rtc_init+0x0/0x3b returned 0 after 4882 usecs [ 11.437017] calling m41t94_init+0x0/0x39 @ 1 [ 11.441971] initcall m41t94_init+0x0/0x39 returned 0 after 0 usecs [ 11.448017] calling m48t35_init+0x0/0x39 @ 1 [ 11.452876] initcall m48t35_init+0x0/0x39 returned 0 after 0 usecs [ 11.459017] calling m48t59_rtc_init+0x0/0x39 @ 1 [ 11.464119] initcall m48t59_rtc_init+0x0/0x39 returned 0 after 976 usecs [ 11.470018] calling max6900_init+0x0/0x3b @ 1 [ 11.475658] i2c-core: driver [rtc-max6900] registered [ 11.480021] initcall max6900_init+0x0/0x3b returned 0 after 4882 usecs [ 11.487017] calling max6902_init+0x0/0x39 @ 1 [ 11.492122] initcall max6902_init+0x0/0x39 returned 0 after 976 usecs [ 11.498018] calling pcf8563_init+0x0/0x3b @ 1 [ 11.503380] i2c-core: driver [rtc-pcf8563] registered [ 11.508021] initcall pcf8563_init+0x0/0x3b returned 0 after 4882 usecs [ 11.514017] calling pcf8583_init+0x0/0x3b @ 1 [ 11.519619] i2c-core: driver [pcf8583] registered [ 11.524058] initcall pcf8583_init+0x0/0x3b returned 0 after 4882 usecs [ 11.531095] calling rs5c348_init+0x0/0x39 @ 1 [ 11.535973] initcall rs5c348_init+0x0/0x39 returned 0 after 0 usecs [ 11.542081] calling rs5c372_init+0x0/0x3b @ 1 [ 11.547119] i2c-core: driver [rtc-rs5c372] registered [ 11.552021] initcall rs5c372_init+0x0/0x3b returned 0 after 5859 usecs [ 11.558017] calling s35390a_rtc_init+0x0/0x3b @ 1 [ 11.563862] i2c-core: driver [rtc-s35390a] registered [ 11.568021] initcall s35390a_rtc_init+0x0/0x3b returned 0 after 4882 usecs [ 11.575017] calling stk17ta8_init+0x0/0x39 @ 1 [ 11.580704] initcall stk17ta8_init+0x0/0x39 returned 0 after 0 usecs [ 11.587017] calling v3020_init+0x0/0x39 @ 1 [ 11.591700] initcall v3020_init+0x0/0x39 returned 0 after 0 usecs [ 11.597017] calling x1205_init+0x0/0x3b @ 1 [ 11.602430] i2c-core: driver [rtc-x1205] registered [ 11.607022] initcall x1205_init+0x0/0x3b returned 0 after 4882 usecs [ 11.613017] calling pcf50633_rtc_init+0x0/0x39 @ 1 [ 11.618917] initcall pcf50633_rtc_init+0x0/0x39 returned 0 after 0 usecs [ 11.625018] calling i2c_dev_init+0x0/0xcb @ 1 [ 11.630015] i2c /dev entries driver [ 11.634273] i2c-core: driver [dev_driver] registered [ 11.639933] i2c-dev: adapter [via_i2c] registered as minor 0 [ 11.645024] initcall i2c_dev_init+0x0/0xcb returned 0 after 14648 usecs [ 11.652021] calling i2c_ali1535_init+0x0/0x42 @ 1 [ 11.657573] initcall i2c_ali1535_init+0x0/0x42 returned 0 after 0 usecs [ 11.664018] calling ali1563_init+0x0/0x42 @ 1 [ 11.669103] initcall ali1563_init+0x0/0x42 returned 0 after 976 usecs [ 11.675018] calling amd756_init+0x0/0x42 @ 1 [ 11.680317] initcall amd756_init+0x0/0x42 returned 0 after 976 usecs [ 11.686018] calling i2c_i801_init+0x0/0x42 @ 1 [ 11.691615] initcall i2c_i801_init+0x0/0x42 returned 0 after 0 usecs [ 11.698018] calling i2c_sch_init+0x0/0x42 @ 1 [ 11.702851] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs [ 11.709018] calling nforce2_init+0x0/0x42 @ 1 [ 11.714214] i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c00] registered [ 11.715078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x69 [ 11.718112] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.719082] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x50 [ 11.724030] i2c-adapter i2c-1: Creating eeprom at 0x50 [ 11.725098] i2c 1-0050: uevent [ 11.726142] eeprom 1-0050: probe [ 11.727051] i2c-adapter i2c-1: client [eeprom] registered with bus id 1-0050 [ 11.728017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x51 [ 11.733029] i2c-adapter i2c-1: Creating eeprom at 0x51 [ 11.734110] i2c 1-0051: uevent [ 11.735153] eeprom 1-0051: probe [ 11.736035] i2c-adapter i2c-1: client [eeprom] registered with bus id 1-0051 [ 11.737016] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x52 [ 11.740029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.741020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x53 [ 11.744028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.745020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x54 [ 11.748028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.749017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x55 [ 11.752028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.753017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x56 [ 11.756028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.757017] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x57 [ 11.760028] i2c-adapter i2c-1: Transaction failed (0x10)! [ 11.761411] i2c-dev: adapter [SMBus nForce2 adapter at 4c00] registered as minor 1 [ 11.762020] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c00 [ 11.763250] i2c-adapter i2c-2: adapter [SMBus nForce2 adapter at 4c40] registered [ 11.764064] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x69 [ 11.767029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.768030] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50 [ 11.771028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.772020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x51 [ 11.775028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.776017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x52 [ 11.779028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.780017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x53 [ 11.783028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.784017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x54 [ 11.787028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.788025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x55 [ 11.791028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.792017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x56 [ 11.795028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.796017] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x57 [ 11.799028] i2c-adapter i2c-2: Transaction failed (0x10)! [ 11.800357] i2c-dev: adapter [SMBus nForce2 adapter at 4c40] registered as minor 2 [ 11.801020] i2c-adapter i2c-2: nForce2 SMBus adapter at 0x4c40 [ 11.802194] initcall nforce2_init+0x0/0x42 returned 0 after 86914 usecs [ 11.809076] calling i2c_piix4_init+0x0/0x42 @ 1 [ 11.814513] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs [ 11.820077] calling i2c_sis630_init+0x0/0x42 @ 1 [ 11.826142] initcall i2c_sis630_init+0x0/0x42 returned 0 after 976 usecs [ 11.832068] calling i2c_sis96x_init+0x0/0x42 @ 1 [ 11.838123] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 976 usecs [ 11.844075] calling i2c_vt586b_init+0x0/0x42 @ 1 [ 11.850111] initcall i2c_vt586b_init+0x0/0x42 returned 0 after 976 usecs [ 11.856077] calling ocores_i2c_init+0x0/0x39 @ 1 [ 11.861982] initcall ocores_i2c_init+0x0/0x39 returned 0 after 976 usecs [ 11.868018] calling i2c_parport_init+0x0/0x6b @ 1 [ 11.873015] i2c-parport: adapter type unspecified [ 11.878017] initcall i2c_parport_init+0x0/0x6b returned -19 after 4882 usecs [ 11.885017] calling taos_init+0x0/0x42 @ 1 [ 11.889836] initcall taos_init+0x0/0x42 returned 0 after 0 usecs [ 11.895018] calling usb_i2c_tiny_usb_init+0x0/0x42 @ 1 [ 11.901447] usbcore: registered new interface driver i2c-tiny-usb [ 11.907025] initcall usb_i2c_tiny_usb_init+0x0/0x42 returned 0 after 5859 usecs [ 11.914019] calling i2c_voodoo3_init+0x0/0x42 @ 1 [ 11.920140] initcall i2c_voodoo3_init+0x0/0x42 returned 0 after 976 usecs [ 11.926018] calling i2c_pca_pf_init+0x0/0x39 @ 1 [ 11.932069] initcall i2c_pca_pf_init+0x0/0x39 returned 0 after 976 usecs [ 11.938018] calling pca9539_init+0x0/0x3b @ 1 [ 11.943588] i2c-core: driver [pca9539] registered [ 11.948043] initcall pca9539_init+0x0/0x3b returned 0 after 4882 usecs [ 11.954017] calling pcf8574_init+0x0/0x3b @ 1 [ 11.959661] i2c-core: driver [pcf8574] registered [ 11.964038] initcall pcf8574_init+0x0/0x3b returned 0 after 4882 usecs [ 11.970017] calling tsl2550_init+0x0/0x3b @ 1 [ 11.975721] i2c-core: driver [tsl2550] registered [ 11.980023] initcall tsl2550_init+0x0/0x3b returned 0 after 4882 usecs [ 11.986018] calling w1_init+0x0/0xcd @ 1 [ 11.991016] Driver for 1-wire Dallas network protocol. [ 11.997183] initcall w1_init+0x0/0xcd returned 0 after 5859 usecs [ 12.003018] calling matrox_w1_init+0x0/0x42 @ 1 [ 12.008306] initcall matrox_w1_init+0x0/0x42 returned 0 after 976 usecs [ 12.014018] calling sensors_ds2482_init+0x0/0x3b @ 1 [ 12.020346] i2c-core: driver [ds2482] registered [ 12.024040] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 4882 usecs [ 12.032017] calling w1_f2d_init+0x0/0x39 @ 1 [ 12.036069] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs [ 12.042018] calling w1_ds2760_init+0x0/0x51 @ 1 [ 12.047016] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 12.056020] initcall w1_ds2760_init+0x0/0x51 returned 0 after 8789 usecs [ 12.062017] calling w1_bq27000_init+0x0/0x49 @ 1 [ 12.067020] initcall w1_bq27000_init+0x0/0x49 returned 0 after 0 usecs [ 12.074017] calling ds2760_battery_init+0x0/0x39 @ 1 [ 12.079568] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs [ 12.086018] calling ds2782_init+0x0/0x3b @ 1 [ 12.091183] i2c-core: driver [ds2782-battery] registered [ 12.096024] initcall ds2782_init+0x0/0x3b returned 0 after 5859 usecs [ 12.102018] calling bq27x00_battery_init+0x0/0x57 @ 1 [ 12.108443] i2c-core: driver [bq27200-battery] registered [ 12.113024] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 4882 usecs [ 12.121017] calling max17040_init+0x0/0x3b @ 1 [ 12.125972] i2c-core: driver [max17040] registered [ 12.130024] initcall max17040_init+0x0/0x3b returned 0 after 4882 usecs [ 12.137017] calling pcf50633_mbc_init+0x0/0x39 @ 1 [ 12.142649] initcall pcf50633_mbc_init+0x0/0x39 returned 0 after 0 usecs [ 12.149018] calling asb100_init+0x0/0x3b @ 1 [ 12.154132] i2c-core: driver [asb100] registered [ 12.158029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.167031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.172028] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.181029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.186025] initcall asb100_init+0x0/0x3b returned 0 after 32226 usecs [ 12.193019] calling sensors_w83627hf_init+0x0/0x9e @ 1 [ 12.198035] initcall sensors_w83627hf_init+0x0/0x9e returned -19 after 0 usecs [ 12.205018] calling sensors_w83792d_init+0x0/0x3b @ 1 [ 12.211475] i2c-core: driver [w83792d] registered [ 12.216028] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.225029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.230018] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.239029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.244018] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.253029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.258019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.267029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.272025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.281029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.286018] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.295029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.300019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.309029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.314019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.323029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.328025] initcall sensors_w83792d_init+0x0/0x3b returned 0 after 114257 usecs [ 12.336019] calling sensors_w83793_init+0x0/0x3b @ 1 [ 12.341604] i2c-core: driver [w83793] registered [ 12.346078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.355079] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.361075] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.369029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.374019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.383029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.388019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.397029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.402025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.411029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.416019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.425029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.430020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.439029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.444019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.453029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.458025] initcall sensors_w83793_init+0x0/0x3b returned 0 after 114257 usecs [ 12.466019] calling sensors_w83781d_init+0x0/0x3b @ 1 [ 12.471790] i2c-core: driver [w83781d] registered [ 12.476028] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 12.485030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.490019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 12.499029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.504019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 12.513029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.518019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 12.527029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.532019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.541029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.546019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.555029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.560019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.569029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.574019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.583029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.588025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 12.597029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.602019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 12.611029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.616019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 12.625029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.630019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 12.639029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.644019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.653029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.658019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.667029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.672019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.681029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.686020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.695029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.700025] initcall sensors_w83781d_init+0x0/0x3b returned 0 after 223632 usecs [ 12.708030] calling sensors_w83791d_init+0x0/0x3b @ 1 [ 12.713866] i2c-core: driver [w83791d] registered [ 12.718029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 12.727030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.732019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 12.741029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.746019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 12.755029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.760019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 12.769029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.774025] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 12.783029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.788019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 12.797029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.802019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 12.811029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.816019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 12.825029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 12.830026] initcall sensors_w83791d_init+0x0/0x3b returned 0 after 114257 usecs [ 12.838019] calling abituguru3_init+0x0/0x185 @ 1 [ 12.843020] initcall abituguru3_init+0x0/0x185 returned -19 after 0 usecs [ 12.849019] calling ad7414_init+0x0/0x3b @ 1 [ 12.854665] i2c-core: driver [ad7414] registered [ 12.859024] initcall ad7414_init+0x0/0x3b returned 0 after 4882 usecs [ 12.865018] calling init_adcxx+0x0/0xa1 @ 1 [ 12.871169] initcall init_adcxx+0x0/0xa1 returned 0 after 976 usecs [ 12.877019] calling sensors_adm1021_init+0x0/0x3b @ 1 [ 12.883153] i2c-core: driver [adm1021] registered [ 12.887217] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x18 [ 12.897030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.902023] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x19 [ 12.911030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.916019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x1a [ 12.925029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.930019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 12.939029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.944021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 12.953029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.958019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 12.967029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.972019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4c [ 12.981029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 12.986019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4d [ 12.995029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.000019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4e [ 13.009030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.014026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x18 [ 13.023029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.028019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x19 [ 13.037029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.042019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x1a [ 13.051029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.056019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 13.065029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.070019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 13.079029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.084019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 13.093029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.098019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c [ 13.107029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.112019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4d [ 13.121029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.126019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4e [ 13.135029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.140026] initcall sensors_adm1021_init+0x0/0x3b returned 0 after 251953 usecs [ 13.148019] calling sm_adm1026_init+0x0/0x3b @ 1 [ 13.153425] i2c-core: driver [adm1026] registered [ 13.158029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.167030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.172019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.181030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.186019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.195029] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.200027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.209030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.214019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.223029] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.228019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.237030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.242026] initcall sm_adm1026_init+0x0/0x3b returned 0 after 86914 usecs [ 13.249019] calling sensors_adm1029_init+0x0/0x3b @ 1 [ 13.255319] i2c-core: driver [adm1029] registered [ 13.260029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 13.268030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.273019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 13.282030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.287019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 13.296030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.301019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 13.310030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.315019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.324030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.329019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.338030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.343019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.352030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.357019] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.366030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.371026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 13.380030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.385019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 13.394030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.399019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 13.408030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.413019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 13.422030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.427019] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.436030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.441020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.450030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.455020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.464030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.469020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.478030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.483026] initcall sensors_adm1029_init+0x0/0x3b returned 0 after 223632 usecs [ 13.491020] calling sensors_adm9240_init+0x0/0x3b @ 1 [ 13.496853] i2c-core: driver [adm9240] registered [ 13.501029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.510030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.515020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.524030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.529020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.538030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.543020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.552030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.557026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.566030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.571020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 13.580030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.585020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.594030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.599020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.608030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.613026] initcall sensors_adm9240_init+0x0/0x3b returned 0 after 114257 usecs [ 13.621020] calling sensors_ads7828_init+0x0/0x78 @ 1 [ 13.626851] i2c-core: driver [ads7828] registered [ 13.631029] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 13.640030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.645020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x49 [ 13.654030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.659020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4a [ 13.668030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.673020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 13.682030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.687026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 13.696030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.701029] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x49 [ 13.710030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.715020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a [ 13.724030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.729020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 13.738030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.743026] initcall sensors_ads7828_init+0x0/0x78 returned 0 after 114257 usecs [ 13.751020] calling adt7470_init+0x0/0x3b @ 1 [ 13.756166] i2c-core: driver [adt7470] registered [ 13.760030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.769030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.774020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.783030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.788020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 13.797030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.802026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.811031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.816020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 13.825030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.830020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 13.839030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.844026] initcall adt7470_init+0x0/0x3b returned 0 after 86914 usecs [ 13.851020] calling atxp1_init+0x0/0x3b @ 1 [ 13.856185] i2c-core: driver [atxp1] registered [ 13.860078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x37 [ 13.869080] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.875076] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4e [ 13.883030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.888026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x37 [ 13.897030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.902020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4e [ 13.911030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 13.916026] initcall atxp1_init+0x0/0x3b returned 0 after 59570 usecs [ 13.923020] calling coretemp_init+0x0/0x182 @ 1 [ 13.928020] initcall coretemp_init+0x0/0x182 returned -19 after 0 usecs [ 13.934020] calling dme1737_init+0x0/0xdb @ 1 [ 13.939463] i2c-core: driver [dme1737] registered [ 13.944030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 13.953031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.958020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 13.967030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.972020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 13.981030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 13.986026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 13.995030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.000020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 14.009030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.014020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 14.023030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.028040] initcall dme1737_init+0x0/0xdb returned 0 after 86914 usecs [ 14.035020] calling ds1621_init+0x0/0x3b @ 1 [ 14.040293] i2c-core: driver [ds1621] registered [ 14.044030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 14.053031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.058020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x49 [ 14.067030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.072020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4a [ 14.081030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.086020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 14.095030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.100020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4c [ 14.109030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.114020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4d [ 14.123030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.128020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4e [ 14.137030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.142020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4f [ 14.151030] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.156026] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 14.165030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.170020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x49 [ 14.179030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.184020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a [ 14.193031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.198020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 14.207030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.212020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c [ 14.221030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.226020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4d [ 14.235032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.240020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4e [ 14.249030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.254020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4f [ 14.263030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.268026] initcall ds1621_init+0x0/0x3b returned 0 after 223632 usecs [ 14.275020] calling sensors_f75375_init+0x0/0x3b @ 1 [ 14.280979] i2c-core: driver [f75375] registered [ 14.285030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 14.294031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.299020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 14.308031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.313027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 14.322030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.327020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 14.336030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.341026] initcall sensors_f75375_init+0x0/0x3b returned 0 after 59570 usecs [ 14.349020] calling sensors_fscher_init+0x0/0x3b @ 1 [ 14.354591] i2c-core: driver [fscher] registered [ 14.359030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x73 [ 14.368031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.373027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x73 [ 14.382030] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.387027] initcall sensors_fscher_init+0x0/0x3b returned 0 after 32226 usecs [ 14.395020] calling sm_fscpos_init+0x0/0x3b @ 1 [ 14.400122] i2c-core: driver [fscpos] registered [ 14.404030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x73 [ 14.413031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.418027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x73 [ 14.427031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.432027] initcall sm_fscpos_init+0x0/0x3b returned 0 after 32226 usecs [ 14.439020] calling g760a_init+0x0/0x3b @ 1 [ 14.444388] i2c-core: driver [g760a] registered [ 14.448027] initcall g760a_init+0x0/0x3b returned 0 after 3906 usecs [ 14.455020] calling sensors_gl520sm_init+0x0/0x3b @ 1 [ 14.460794] i2c-core: driver [gl520sm] registered [ 14.465026] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 14.474031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.479020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 14.488031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.493028] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 14.502031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.507020] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 14.516031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.521027] initcall sensors_gl520sm_init+0x0/0x3b returned 0 after 59570 usecs [ 14.529020] calling i5k_amb_init+0x0/0x8c @ 1 [ 14.534203] initcall i5k_amb_init+0x0/0x8c returned 0 after 976 usecs [ 14.541020] calling aem_init+0x0/0x75 @ 1 [ 14.545529] initcall aem_init+0x0/0x75 returned 0 after 0 usecs [ 14.551020] calling ibmpex_init+0x0/0x39 @ 1 [ 14.555022] initcall ibmpex_init+0x0/0x39 returned 0 after 0 usecs [ 14.562020] calling sm_it87_init+0x0/0x8d @ 1 [ 14.566047] it87: Found IT8712F chip at 0x290, revision 7 [ 14.571023] it87: in3 is VCC (+5V) [ 14.575017] it87: in7 is VCCH (+5V Stand-By) [ 14.580317] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface [ 14.588808] initcall sm_it87_init+0x0/0x8d returned 0 after 21484 usecs [ 14.595021] calling k8temp_init+0x0/0x42 @ 1 [ 14.602163] initcall k8temp_init+0x0/0x42 returned 0 after 2929 usecs [ 14.608026] calling init_lm70+0x0/0x65 @ 1 [ 14.613420] initcall init_lm70+0x0/0x65 returned 0 after 0 usecs [ 14.619161] calling sensors_lm75_init+0x0/0x3b @ 1 [ 14.625166] i2c-core: driver [lm75] registered [ 14.629057] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 14.638100] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.644025] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x49 [ 14.652031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.657020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4a [ 14.666031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.671020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 14.680031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.685020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4c [ 14.694031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.699020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4d [ 14.708031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.713020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4e [ 14.722031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.727020] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4f [ 14.736031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.741027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 14.750031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.755021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x49 [ 14.764031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.769021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a [ 14.778031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.783021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 14.792031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.797021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c [ 14.806031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.811021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4d [ 14.820031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.825021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4e [ 14.834031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.839021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4f [ 14.848031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.853027] initcall sensors_lm75_init+0x0/0x3b returned 0 after 223632 usecs [ 14.861021] calling sensors_lm77_init+0x0/0x3b @ 1 [ 14.866355] i2c-core: driver [lm77] registered [ 14.870030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 14.879031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.884021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x49 [ 14.893031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.898021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4a [ 14.907031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.912021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 14.921031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 14.926027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 14.935031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.940021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x49 [ 14.949031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.954021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a [ 14.963031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.968021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 14.977031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 14.982027] initcall sensors_lm77_init+0x0/0x3b returned 0 after 114257 usecs [ 14.990021] calling sm_lm78_init+0x0/0x91 @ 1 [ 14.994041] lm78: Failed to request high part of region [ 15.000124] i2c-core: driver [lm78] registered [ 15.004030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 15.013032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.018021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 15.027031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.032021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 15.041031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.046021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 15.055031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.060021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 15.069031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.074021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 15.083031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.088021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 15.097031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.102021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 15.111031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.116027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 15.125031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.130021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 15.139031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.144021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 15.153031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.158021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 15.167031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.172021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 15.181031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.186021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 15.195031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.200021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 15.209031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.214021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 15.223031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.228027] initcall sm_lm78_init+0x0/0x91 returned 0 after 228515 usecs [ 15.235021] calling sensors_lm80_init+0x0/0x3b @ 1 [ 15.240901] i2c-core: driver [lm80] registered [ 15.245030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x28 [ 15.254032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.259021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x29 [ 15.268031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.273021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a [ 15.282031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.287021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b [ 15.296031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.301021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 15.310031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.315021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 15.324031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.329021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 15.338031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.343021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 15.352031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.357027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x28 [ 15.366031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.371021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x29 [ 15.380031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.385021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2a [ 15.394031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.399021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2b [ 15.408031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.413021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 15.422031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.427021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 15.436031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.441021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 15.450031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.455021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 15.464031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.469027] initcall sensors_lm80_init+0x0/0x3b returned 0 after 223632 usecs [ 15.477021] calling sm_lm85_init+0x0/0x3b @ 1 [ 15.481892] i2c-core: driver [lm85] registered [ 15.486030] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 15.495032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.500021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 15.509032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.514021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 15.523033] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.528028] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 15.537031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.542021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 15.551031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.556021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 15.565031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.570027] initcall sm_lm85_init+0x0/0x3b returned 0 after 86914 usecs [ 15.577021] calling ltc4215_init+0x0/0x3b @ 1 [ 15.582362] i2c-core: driver [ltc4215] registered [ 15.587041] initcall ltc4215_init+0x0/0x3b returned 0 after 4882 usecs [ 15.593021] calling max1111_init+0x0/0x39 @ 1 [ 15.598433] initcall max1111_init+0x0/0x39 returned 0 after 0 usecs [ 15.604021] calling sensors_max6650_init+0x0/0x3b @ 1 [ 15.610188] i2c-core: driver [max6650] registered [ 15.614079] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x1b [ 15.623082] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.628078] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x1f [ 15.637032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.642021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x48 [ 15.651031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.656021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4b [ 15.665031] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.670027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x1b [ 15.679031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.684021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x1f [ 15.693032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.698021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x48 [ 15.707031] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.712021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b [ 15.721032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.726028] initcall sensors_max6650_init+0x0/0x3b returned 0 after 114257 usecs [ 15.734021] calling pc87427_init+0x0/0x96 @ 1 [ 15.738034] initcall pc87427_init+0x0/0x96 returned -19 after 0 usecs [ 15.745020] calling smsc47b397_init+0x0/0xfd @ 1 [ 15.749027] initcall smsc47b397_init+0x0/0xfd returned -19 after 976 usecs [ 15.756021] calling sm_smsc47m1_init+0x0/0x80 @ 1 [ 15.761027] initcall sm_smsc47m1_init+0x0/0x80 returned -19 after 0 usecs [ 15.768020] calling smsc47m192_init+0x0/0x3b @ 1 [ 15.773542] i2c-core: driver [smsc47m192] registered [ 15.778031] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 15.787032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.792021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 15.801032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.806027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 15.815032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.820021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 15.829032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.834027] initcall smsc47m192_init+0x0/0x3b returned 0 after 59570 usecs [ 15.841021] calling sm_thmc50_init+0x0/0x3b @ 1 [ 15.846819] i2c-core: driver [thmc50] registered [ 15.851031] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2c [ 15.860032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.865021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2d [ 15.874032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.879021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 15.888032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.893027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2c [ 15.902032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.907021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2d [ 15.916032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.921021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 15.930032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.935027] initcall sm_thmc50_init+0x0/0x3b returned 0 after 86914 usecs [ 15.942021] calling tmp401_init+0x0/0x3b @ 1 [ 15.947453] i2c-core: driver [tmp401] registered [ 15.952031] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x4c [ 15.960032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 15.965028] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c [ 15.974032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 15.979027] initcall tmp401_init+0x0/0x3b returned 0 after 31250 usecs [ 15.986021] calling sm_via686a_init+0x0/0x42 @ 1 [ 15.991604] initcall sm_via686a_init+0x0/0x42 returned 0 after 0 usecs [ 15.998020] calling sensors_w83l786ng_init+0x0/0x3b @ 1 [ 16.003826] i2c-core: driver [w83l786ng] registered [ 16.008031] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2e [ 16.017032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 16.022021] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2f [ 16.031032] i2c-adapter i2c-1: Transaction failed (0x10)! [ 16.036027] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2e [ 16.045032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 16.050021] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x2f [ 16.059032] i2c-adapter i2c-2: Transaction failed (0x10)! [ 16.064027] initcall sensors_w83l786ng_init+0x0/0x3b returned 0 after 59570 usecs [ 16.072021] calling pcipcwd_init_module+0x0/0x5c @ 1 [ 16.077897] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs [ 16.084021] calling wdtpci_init+0x0/0x42 @ 1 [ 16.089540] initcall wdtpci_init+0x0/0x42 returned 0 after 0 usecs [ 16.095021] calling usb_pcwd_init+0x0/0x70 @ 1 [ 16.100653] usbcore: registered new interface driver pcwd_usb [ 16.106025] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 [ 16.112021] initcall usb_pcwd_init+0x0/0x70 returned 0 after 11718 usecs [ 16.118020] calling advwdt_init+0x0/0x83 @ 1 [ 16.123019] WDT driver for Advantech single board computer initialising. [ 16.131081] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 16.137040] initcall advwdt_init+0x0/0x83 returned 0 after 13671 usecs [ 16.143075] calling watchdog_init+0x0/0xf1 @ 1 [ 16.148122] initcall watchdog_init+0x0/0xf1 returned -19 after 0 usecs [ 16.155143] calling ibwdt_init+0x0/0x83 @ 1 [ 16.159078] ib700wdt: WDT driver for IB700 single board computer initialising. [ 16.167335] ib700wdt: START method I/O 443 is not available. [ 16.173099] ib700wdt: probe of ib700wdt failed with error -5 [ 16.179034] initcall ibwdt_init+0x0/0x83 returned 0 after 19531 usecs [ 16.185020] calling ibmasr_init+0x0/0xdb @ 1 [ 16.190021] initcall ibmasr_init+0x0/0xdb returned -19 after 0 usecs [ 16.196020] calling watchdog_init+0x0/0x8a @ 1 [ 16.200019] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 [ 16.207579] initcall watchdog_init+0x0/0x8a returned 0 after 7812 usecs [ 16.214071] calling iTCO_wdt_init_module+0x0/0x8a @ 1 [ 16.219156] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 16.226206] iTCO_wdt: No card detected [ 16.230050] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 9765 usecs [ 16.237074] calling it8712f_wdt_init+0x0/0x114 @ 1 [ 16.242121] it8712f_wdt: Found IT8712F chip revision 7 - using DogFood address 0x201 [ 16.250025] it8712f_wdt: disabling watchdog timer [ 16.255044] it8712f_wdt: cannot register miscdev on minor=130 (err=-16) [ 16.261026] initcall it8712f_wdt_init+0x0/0x114 returned -16 after 18554 usecs [ 16.269021] initcall it8712f_wdt_init+0x0/0x114 returned with error code -16 [ 16.276020] calling sc1200wdt_init+0x0/0x13a @ 1 [ 16.280019] sc1200wdt: build 20020303 [ 16.284019] sc1200wdt: io parameter must be specified [ 16.289020] initcall sc1200wdt_init+0x0/0x13a returned -22 after 8789 usecs [ 16.296020] initcall sc1200wdt_init+0x0/0x13a returned with error code -22 [ 16.303023] calling pc87413_init+0x0/0xb5 @ 1 [ 16.308019] pc87413 WDT: Version 1.1 at io 0x2E [ 16.312020] pc87413 WDT: cannot register miscdev on minor=130 (err=-16) [ 16.319020] initcall pc87413_init+0x0/0xb5 returned -16 after 10742 usecs [ 16.326020] initcall pc87413_init+0x0/0xb5 returned with error code -16 [ 16.332020] calling sbc8360_init+0x0/0x1ca @ 1 [ 16.337024] sbc8360: failed to register misc device [ 16.342030] initcall sbc8360_init+0x0/0x1ca returned -16 after 4882 usecs [ 16.348021] initcall sbc8360_init+0x0/0x1ca returned with error code -16 [ 16.355021] calling cpu5wdt_init_module+0x0/0x37 @ 1 [ 16.360026] cpu5wdt: sorry, was my fault [ 16.364020] cpu5wdt: misc_register failed [ 16.368025] initcall cpu5wdt_init_module+0x0/0x37 returned -16 after 7812 usecs [ 16.376020] initcall cpu5wdt_init_module+0x0/0x37 returned with error code -16 [ 16.383020] calling sch311x_wdt_init+0x0/0x176 @ 1 [ 16.388038] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs [ 16.395020] calling wdt_init+0x0/0x142 @ 1 [ 16.399019] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. [ 16.407052] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec [ 16.415049] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16) [ 16.422025] initcall wdt_init+0x0/0x142 returned -16 after 22460 usecs [ 16.429020] initcall wdt_init+0x0/0x142 returned with error code -16 [ 16.435020] calling w83877f_wdt_init+0x0/0x183 @ 1 [ 16.440028] w83877f_wdt: I/O address 0x0443 already in use [ 16.446025] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 5859 usecs [ 16.453021] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5 [ 16.460020] calling w83977f_wdt_init+0x0/0x16d @ 1 [ 16.465019] W83977F WDT: W83977F WDT driver, v1.00 [ 16.469023] W83977F WDT: cannot register miscdev on minor=130 (err=-16) [ 16.476026] initcall w83977f_wdt_init+0x0/0x16d returned -16 after 10742 usecs [ 16.483021] initcall w83977f_wdt_init+0x0/0x16d returned with error code -16 [ 16.490020] calling watchdog_init+0x0/0xde @ 1 [ 16.495024] epx_c3: cannot register miscdev on minor=130 (err=-16) [ 16.501026] initcall watchdog_init+0x0/0xde returned -16 after 5859 usecs [ 16.508020] initcall watchdog_init+0x0/0xde returned with error code -16 [ 16.515020] calling watchdog_init+0x0/0xdb @ 1 [ 16.519021] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 16.525020] initcall watchdog_init+0x0/0xdb returned -16 after 5859 usecs [ 16.532020] initcall watchdog_init+0x0/0xdb returned with error code -16 [ 16.539020] calling telephony_init+0x0/0x71 @ 1 [ 16.544019] Linux telephony interface: v1.00 [ 16.548032] initcall telephony_init+0x0/0x71 returned 0 after 3906 usecs [ 16.555020] calling linear_init+0x0/0x39 @ 1 [ 16.559049] md: linear personality registered for level -1 [ 16.565022] initcall linear_init+0x0/0x39 returned 0 after 5859 usecs [ 16.571020] calling raid0_init+0x0/0x39 @ 1 [ 16.575020] md: raid0 personality registered for level 0 [ 16.581021] initcall raid0_init+0x0/0x39 returned 0 after 5859 usecs [ 16.587020] calling raid_init+0x0/0x39 @ 1 [ 16.591020] md: raid1 personality registered for level 1 [ 16.596021] initcall raid_init+0x0/0x39 returned 0 after 4882 usecs [ 16.603020] calling raid_init+0x0/0x39 @ 1 [ 16.607020] md: raid10 personality registered for level 10 [ 16.612021] initcall raid_init+0x0/0x39 returned 0 after 4882 usecs [ 16.619020] calling raid_init+0x0/0x39 @ 1 [ 16.623020] md: faulty personality registered for level -5 [ 16.628021] initcall raid_init+0x0/0x39 returned 0 after 4882 usecs [ 16.635020] calling dm_init+0x0/0x6f @ 1 [ 16.643171] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 16.651081] initcall dm_init+0x0/0x6f returned 0 after 11718 usecs [ 16.657138] calling dm_crypt_init+0x0/0x8f @ 1 [ 16.663267] initcall dm_crypt_init+0x0/0x8f returned 0 after 976 usecs [ 16.669085] calling dm_delay_init+0x0/0xe8 @ 1 [ 16.675284] initcall dm_delay_init+0x0/0xe8 returned 0 after 976 usecs [ 16.681022] calling dm_snapshot_init+0x0/0x267 @ 1 [ 16.688392] initcall dm_snapshot_init+0x0/0x267 returned 0 after 1953 usecs [ 16.695021] calling dm_mirror_init+0x0/0x9f @ 1 [ 16.701205] initcall dm_mirror_init+0x0/0x9f returned 0 after 976 usecs [ 16.707032] calling dm_dirty_log_init+0x0/0x7f @ 1 [ 16.712056] initcall dm_dirty_log_init+0x0/0x7f returned 0 after 0 usecs [ 16.719021] calling userspace_dirty_log_init+0x0/0xca @ 1 [ 16.724169] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 16.731022] initcall userspace_dirty_log_init+0x0/0xca returned 0 after 6835 usecs [ 16.738021] calling dm_zero_init+0x0/0x57 @ 1 [ 16.743024] initcall dm_zero_init+0x0/0x57 returned 0 after 0 usecs [ 16.749021] calling bcm203x_init+0x0/0x78 @ 1 [ 16.753020] Bluetooth: Broadcom Blutonium firmware driver ver 1.2 [ 16.760459] usbcore: registered new interface driver bcm203x [ 16.766029] initcall bcm203x_init+0x0/0x78 returned 0 after 12695 usecs [ 16.772021] calling bpa10x_init+0x0/0x55 @ 1 [ 16.777019] Bluetooth: Digianswer Bluetooth USB driver ver 0.10 [ 16.783391] usbcore: registered new interface driver bpa10x [ 16.788027] initcall bpa10x_init+0x0/0x55 returned 0 after 10742 usecs [ 16.795021] calling btusb_init+0x0/0x55 @ 1 [ 16.799019] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 16.805724] usbcore: registered new interface driver btusb [ 16.811027] initcall btusb_init+0x0/0x55 returned 0 after 11718 usecs [ 16.817024] calling cpufreq_stats_init+0x0/0xca @ 1 [ 16.822044] initcall cpufreq_stats_init+0x0/0xca returned 0 after 0 usecs [ 16.829021] calling cpufreq_gov_powersave_init+0x0/0x39 @ 1 [ 16.835023] initcall cpufreq_gov_powersave_init+0x0/0x39 returned 0 after 0 usecs [ 16.842021] calling cpufreq_gov_dbs_init+0x0/0x103 @ 1 [ 16.849040] initcall cpufreq_gov_dbs_init+0x0/0x103 returned 0 after 1953 usecs [ 16.856022] calling cpufreq_gov_dbs_init+0x0/0x8e @ 1 [ 16.862133] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs [ 16.869023] calling init_ladder+0x0/0x39 @ 1 [ 16.873051] cpuidle: using governor ladder [ 16.877023] initcall init_ladder+0x0/0x39 returned 0 after 3906 usecs [ 16.884022] calling init_menu+0x0/0x39 @ 1 [ 16.888021] cpuidle: using governor menu [ 16.892023] initcall init_menu+0x0/0x39 returned 0 after 3906 usecs [ 16.898022] calling i7300_idle_init+0x0/0x1b1 @ 1 [ 16.903179] initcall i7300_idle_init+0x0/0x1b1 returned -19 after 0 usecs [ 16.910022] calling memstick_init+0x0/0xab @ 1 [ 16.915273] initcall memstick_init+0x0/0xab returned 0 after 976 usecs [ 16.922076] calling mspro_block_init+0x0/0x98 @ 1 [ 16.927556] initcall mspro_block_init+0x0/0x98 returned 0 after 0 usecs [ 16.934079] calling tifm_ms_init+0x0/0x39 @ 1 [ 16.939155] initcall tifm_ms_init+0x0/0x39 returned 0 after 976 usecs [ 16.945080] calling jmb38x_ms_init+0x0/0x42 @ 1 [ 16.950715] initcall jmb38x_ms_init+0x0/0x42 returned 0 after 0 usecs [ 16.957021] calling pca9532_init+0x0/0x3b @ 1 [ 16.961991] i2c-core: driver [pca9532] registered [ 16.966029] initcall pca9532_init+0x0/0x3b returned 0 after 4882 usecs [ 16.973021] calling clevo_mail_led_init+0x0/0xba @ 1 [ 16.978024] initcall clevo_mail_led_init+0x0/0xba returned -19 after 0 usecs [ 16.985021] calling pca955x_leds_init+0x0/0x3b @ 1 [ 16.990587] i2c-core: driver [leds-pca955x] registered [ 16.995027] initcall pca955x_leds_init+0x0/0x3b returned 0 after 4882 usecs [ 17.002021] calling dac124s085_leds_init+0x0/0x39 @ 1 [ 17.008193] initcall dac124s085_leds_init+0x0/0x39 returned 0 after 976 usecs [ 17.015070] calling heartbeat_trig_init+0x0/0x39 @ 1 [ 17.020072] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs [ 17.027068] calling bl_trig_init+0x0/0x39 @ 1 [ 17.031031] initcall bl_trig_init+0x0/0x39 returned 0 after 0 usecs [ 17.038021] calling ib_core_init+0x0/0x6a @ 1 [ 17.042967] initcall ib_core_init+0x0/0x6a returned 0 after 976 usecs [ 17.049072] calling ib_mad_init_module+0x0/0xca @ 1 [ 17.055277] initcall ib_mad_init_module+0x0/0xca returned 0 after 976 usecs [ 17.062080] calling ib_sa_init+0x0/0xc1 @ 1 [ 17.066719] initcall ib_sa_init+0x0/0xc1 returned 0 after 0 usecs [ 17.072022] calling ib_cm_init+0x0/0x180 @ 1 [ 17.079039] initcall ib_cm_init+0x0/0x180 returned 0 after 1953 usecs [ 17.085022] calling iw_cm_init+0x0/0x5c @ 1 [ 17.090391] initcall iw_cm_init+0x0/0x5c returned 0 after 0 usecs [ 17.096022] calling addr_init+0x0/0x6d @ 1 [ 17.100809] initcall addr_init+0x0/0x6d returned 0 after 0 usecs [ 17.106022] calling cma_init+0x0/0x108 @ 1 [ 17.111220] initcall cma_init+0x0/0x108 returned 0 after 0 usecs [ 17.117022] calling infinipath_init+0x0/0xe9 @ 1 [ 17.122440] initcall infinipath_init+0x0/0xe9 returned 0 after 976 usecs [ 17.129022] calling c2_init_module+0x0/0x42 @ 1 [ 17.134226] initcall c2_init_module+0x0/0x42 returned 0 after 976 usecs [ 17.140074] calling mlx4_ib_init+0x0/0x39 @ 1 [ 17.145090] initcall mlx4_ib_init+0x0/0x39 returned 0 after 0 usecs [ 17.151069] calling nes_init_module+0x0/0x80 @ 1 [ 17.157166] initcall nes_init_module+0x0/0x80 returned 0 after 976 usecs [ 17.163084] calling ipoib_init_module+0x0/0x12d @ 1 [ 17.169315] initcall ipoib_init_module+0x0/0x12d returned 0 after 0 usecs [ 17.176071] calling srp_init_module+0x0/0x116 @ 1 [ 17.181372] initcall srp_init_module+0x0/0x116 returned 0 after 976 usecs [ 17.188022] calling dcdrbu_init+0x0/0x169 @ 1 [ 17.192997] initcall dcdrbu_init+0x0/0x169 returned 0 after 976 usecs [ 17.199022] calling ibft_init+0x0/0x1e6 @ 1 [ 17.203030] No iBFT detected. [ 17.206022] initcall ibft_init+0x0/0x1e6 returned 0 after 2929 usecs [ 17.213021] calling padlock_init+0x0/0x11d @ 1 [ 17.217019] padlock: VIA PadLock not detected. [ 17.222021] initcall padlock_init+0x0/0x11d returned -19 after 4882 usecs [ 17.228021] calling hifn_init+0x0/0x3e @ 1 [ 17.233019] HIFN supports only 32-bit addresses. [ 17.237021] initcall hifn_init+0x0/0x3e returned -22 after 3906 usecs [ 17.244021] initcall hifn_init+0x0/0x3e returned with error code -22 [ 17.250021] calling hid_init+0x0/0x6e @ 1 [ 17.255220] initcall hid_init+0x0/0x6e returned 0 after 976 usecs [ 17.261023] calling apple_init+0x0/0x63 @ 1 [ 17.266202] initcall apple_init+0x0/0x63 returned 0 after 976 usecs [ 17.272064] calling ch_init+0x0/0x47 @ 1 [ 17.276983] initcall ch_init+0x0/0x47 returned 0 after 976 usecs [ 17.283081] calling ch_init+0x0/0x47 @ 1 [ 17.287443] initcall ch_init+0x0/0x47 returned 0 after 0 usecs [ 17.293026] calling cp_init+0x0/0x47 @ 1 [ 17.297654] initcall cp_init+0x0/0x47 returned 0 after 0 usecs [ 17.303022] calling gyration_init+0x0/0x47 @ 1 [ 17.308386] initcall gyration_init+0x0/0x47 returned 0 after 0 usecs [ 17.314022] calling kye_init+0x0/0x47 @ 1 [ 17.319194] initcall kye_init+0x0/0x47 returned 0 after 976 usecs [ 17.325027] calling lg_init+0x0/0x47 @ 1 [ 17.329583] initcall lg_init+0x0/0x47 returned 0 after 0 usecs [ 17.335099] calling ms_init+0x0/0x47 @ 1 [ 17.340081] initcall ms_init+0x0/0x47 returned 0 after 976 usecs [ 17.346086] calling mr_init+0x0/0x47 @ 1 [ 17.350542] initcall mr_init+0x0/0x47 returned 0 after 0 usecs [ 17.356079] calling ntrig_init+0x0/0x47 @ 1 [ 17.361143] initcall ntrig_init+0x0/0x47 returned 0 after 976 usecs [ 17.367022] calling pl_init+0x0/0x47 @ 1 [ 17.371811] initcall pl_init+0x0/0x47 returned 0 after 0 usecs [ 17.377022] calling pl_init+0x0/0x47 @ 1 [ 17.382075] initcall pl_init+0x0/0x47 returned 0 after 976 usecs [ 17.388022] calling samsung_init+0x0/0x47 @ 1 [ 17.392914] initcall samsung_init+0x0/0x47 returned 0 after 0 usecs [ 17.399022] calling sony_init+0x0/0x47 @ 1 [ 17.403586] initcall sony_init+0x0/0x47 returned 0 after 0 usecs [ 17.409071] calling sp_init+0x0/0x47 @ 1 [ 17.414138] initcall sp_init+0x0/0x47 returned 0 after 976 usecs [ 17.420072] calling ga_init+0x0/0x42 @ 1 [ 17.424585] initcall ga_init+0x0/0x42 returned 0 after 0 usecs [ 17.430071] calling ts_init+0x0/0x47 @ 1 [ 17.435097] initcall ts_init+0x0/0x47 returned 0 after 976 usecs [ 17.441080] calling wacom_init+0x0/0x71 @ 1 [ 17.445871] wacom driver registered [ 17.449027] initcall wacom_init+0x0/0x71 returned 0 after 3906 usecs [ 17.455075] calling hid_init+0x0/0xf1 @ 1 [ 17.460285] usbcore: registered new interface driver hiddev [ 17.466690] usbcore: registered new interface driver usbhid [ 17.472161] usbhid: v2.6:USB HID core driver [ 17.476112] initcall hid_init+0x0/0xf1 returned 0 after 16601 usecs [ 17.483087] calling usb_mouse_init+0x0/0x5e @ 1 [ 17.488145] usbcore: registered new interface driver usbmouse [ 17.493083] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 17.499025] initcall usb_mouse_init+0x0/0x5e returned 0 after 11718 usecs [ 17.506021] calling fake_init+0x0/0x53 @ 1 [ 17.511383] ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware [ 17.519914] initcall fake_init+0x0/0x53 returned 0 after 8789 usecs [ 17.526022] calling init_soundcore+0x0/0xa5 @ 1 [ 17.531181] initcall init_soundcore+0x0/0xa5 returned 0 after 976 usecs [ 17.537022] calling alsa_sound_init+0x0/0xba @ 1 [ 17.542305] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 17.549023] initcall alsa_sound_init+0x0/0xba returned 0 after 6835 usecs [ 17.555021] calling alsa_timer_init+0x0/0xf4 @ 1 [ 17.561462] initcall alsa_timer_init+0x0/0xf4 returned 0 after 976 usecs [ 17.568023] calling snd_hrtimer_init+0x0/0x129 @ 1 [ 17.573028] initcall snd_hrtimer_init+0x0/0x129 returned 0 after 0 usecs [ 17.579022] calling alsa_pcm_init+0x0/0x92 @ 1 [ 17.584080] initcall alsa_pcm_init+0x0/0x92 returned 0 after 0 usecs [ 17.590022] calling snd_mem_init+0x0/0x53 @ 1 [ 17.595044] initcall snd_mem_init+0x0/0x53 returned 0 after 0 usecs [ 17.601022] calling alsa_rawmidi_init+0x0/0xcb @ 1 [ 17.606029] initcall alsa_rawmidi_init+0x0/0xcb returned 0 after 0 usecs [ 17.613022] calling alsa_pcm_oss_init+0x0/0xcc @ 1 [ 17.618052] initcall alsa_pcm_oss_init+0x0/0xcc returned 0 after 0 usecs [ 17.624022] calling alsa_seq_init+0x0/0x5f @ 1 [ 17.629990] initcall alsa_seq_init+0x0/0x5f returned 0 after 976 usecs [ 17.636025] calling alsa_seq_device_init+0x0/0x82 @ 1 [ 17.641040] initcall alsa_seq_device_init+0x0/0x82 returned 0 after 0 usecs [ 17.648022] calling alsa_seq_midi_event_init+0x0/0x2d @ 1 [ 17.654022] initcall alsa_seq_midi_event_init+0x0/0x2d returned 0 after 0 usecs [ 17.661021] calling alsa_seq_oss_init+0x0/0xf3 @ 1 [ 17.667569] initcall alsa_seq_oss_init+0x0/0xf3 returned 0 after 1953 usecs [ 17.675024] calling alsa_seq_dummy_init+0x0/0x32 @ 1 [ 17.680110] initcall alsa_seq_dummy_init+0x0/0x32 returned 0 after 0 usecs [ 17.687022] calling alsa_seq_midi_init+0x0/0x52 @ 1 [ 17.692058] initcall alsa_seq_midi_init+0x0/0x52 returned 0 after 0 usecs [ 17.699022] calling alsa_card_serial_init+0x0/0xb4 @ 1 [ 17.705228] no UART detected at 0x1 [ 17.709466] initcall alsa_card_serial_init+0x0/0xb4 returned -19 after 4882 usecs [ 17.717023] calling snd_mts64_module_init+0x0/0x75 @ 1 [ 17.723265] snd_mts64: probe of snd_mts64.0 failed with error -5 [ 17.730188] initcall snd_mts64_module_init+0x0/0x75 returned -19 after 7812 usecs [ 17.737077] calling snd_portman_module_init+0x0/0x75 @ 1 [ 17.743658] snd_portman2x4: probe of snd_portman2x4.0 failed with error -5 [ 17.751364] initcall snd_portman_module_init+0x0/0x75 returned -19 after 7812 usecs [ 17.759149] calling alsa_mpu401_uart_init+0x0/0x2d @ 1 [ 17.764188] initcall alsa_mpu401_uart_init+0x0/0x2d returned 0 after 0 usecs [ 17.771081] calling alsa_card_mpu401_init+0x0/0xb2 @ 1 [ 17.777587] ALSA sound/drivers/mpu401/mpu401.c:111: specify port [ 17.784192] snd_mpu401: probe of snd_mpu401.0 failed with error -22 [ 17.791212] initcall alsa_card_mpu401_init+0x0/0xb2 returned -19 after 13671 usecs [ 17.799093] calling pcsp_init+0x0/0x47 @ 1 [ 17.803114] Error: Driver 'pcspkr' is already registered, aborting... [ 17.809069] initcall pcsp_init+0x0/0x47 returned -17 after 5859 usecs [ 17.816068] initcall pcsp_init+0x0/0x47 returned with error code -17 [ 17.822026] calling snd_soc_init+0x0/0x74 @ 1 [ 17.827720] initcall snd_soc_init+0x0/0x74 returned 0 after 0 usecs [ 17.834022] calling alsa_sound_last_init+0x0/0x93 @ 1 [ 17.839020] ALSA device list: [ 17.842020] No soundcards found. [ 17.845022] initcall alsa_sound_last_init+0x0/0x93 returned 0 after 5859 usecs [ 17.852025] calling oprofile_init+0x0/0x78 @ 1 [ 17.857023] oprofile: using NMI interrupt. [ 17.861032] initcall oprofile_init+0x0/0x78 returned 0 after 3906 usecs [ 17.868022] calling flow_cache_init+0x0/0x1c9 @ 1 [ 17.873507] initcall flow_cache_init+0x0/0x1c9 returned 0 after 976 usecs [ 17.880022] calling llc_init+0x0/0x47 @ 1 [ 17.884025] initcall llc_init+0x0/0x47 returned 0 after 0 usecs [ 17.890022] calling llc2_init+0x0/0xf4 @ 1 [ 17.894093] NET: Registered protocol family 26 [ 17.899023] initcall llc2_init+0x0/0xf4 returned 0 after 4882 usecs [ 17.905022] calling snap_init+0x0/0x61 @ 1 [ 17.909084] initcall snap_init+0x0/0x61 returned 0 after 0 usecs [ 17.915022] calling rif_init+0x0/0xb5 @ 1 [ 17.919046] initcall rif_init+0x0/0xb5 returned 0 after 0 usecs [ 17.925022] calling sysctl_ipv4_init+0x0/0x74 @ 1 [ 17.930043] initcall sysctl_ipv4_init+0x0/0x74 returned 0 after 0 usecs [ 17.937021] calling ipgre_init+0x0/0xd7 @ 1 [ 17.941020] GRE over IPv4 tunneling driver [ 17.946317] initcall ipgre_init+0x0/0xd7 returned 0 after 4882 usecs [ 17.952023] calling init_syncookies+0x0/0x40 @ 1 [ 17.957066] initcall init_syncookies+0x0/0x40 returned 0 after 0 usecs [ 17.964021] calling ah4_init+0x0/0x8f @ 1 [ 17.968025] initcall ah4_init+0x0/0x8f returned 0 after 0 usecs [ 17.974021] calling esp4_init+0x0/0x8f @ 1 [ 17.978023] initcall esp4_init+0x0/0x8f returned 0 after 0 usecs [ 17.984021] calling xfrm4_beet_init+0x0/0x3e @ 1 [ 17.989023] initcall xfrm4_beet_init+0x0/0x3e returned 0 after 0 usecs [ 17.995021] calling xfrm4_transport_init+0x0/0x3e @ 1 [ 18.000022] initcall xfrm4_transport_init+0x0/0x3e returned 0 after 0 usecs [ 18.007021] calling xfrm4_mode_tunnel_init+0x0/0x3e @ 1 [ 18.013022] initcall xfrm4_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs [ 18.020021] calling inet_diag_init+0x0/0xbc @ 1 [ 18.024079] initcall inet_diag_init+0x0/0xbc returned 0 after 0 usecs [ 18.031022] calling tcp_diag_init+0x0/0x39 @ 1 [ 18.035065] initcall tcp_diag_init+0x0/0x39 returned 0 after 0 usecs [ 18.042022] calling cubictcp_register+0x0/0x88 @ 1 [ 18.047022] TCP cubic registered [ 18.050022] initcall cubictcp_register+0x0/0x88 returned 0 after 2929 usecs [ 18.057021] calling xfrm_user_init+0x0/0x71 @ 1 [ 18.061021] Initializing XFRM netlink socket [ 18.066131] initcall xfrm_user_init+0x0/0x71 returned 0 after 3906 usecs [ 18.073022] calling inet6_init+0x0/0x2ec @ 1 [ 18.081279] NET: Registered protocol family 10 [ 18.091367] initcall inet6_init+0x0/0x2ec returned 0 after 13671 usecs [ 18.098115] calling ah6_init+0x0/0x8f @ 1 [ 18.102078] initcall ah6_init+0x0/0x8f returned 0 after 0 usecs [ 18.108088] calling ipcomp6_init+0x0/0x8f @ 1 [ 18.113028] initcall ipcomp6_init+0x0/0x8f returned 0 after 0 usecs [ 18.119022] calling xfrm6_tunnel_init+0x0/0x11c @ 1 [ 18.125160] initcall xfrm6_tunnel_init+0x0/0x11c returned 0 after 976 usecs [ 18.132072] calling tunnel6_init+0x0/0x8f @ 1 [ 18.136126] initcall tunnel6_init+0x0/0x8f returned 0 after 0 usecs [ 18.143069] calling xfrm6_mode_tunnel_init+0x0/0x3e @ 1 [ 18.148077] initcall xfrm6_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs [ 18.155025] calling xfrm6_ro_init+0x0/0x3e @ 1 [ 18.160023] initcall xfrm6_ro_init+0x0/0x3e returned 0 after 0 usecs [ 18.166021] calling mip6_init+0x0/0xe1 @ 1 [ 18.170020] Mobile IPv6 [ 18.173024] initcall mip6_init+0x0/0xe1 returned 0 after 2929 usecs [ 18.179022] calling ip6_tunnel_init+0x0/0xc8 @ 1 [ 18.184749] initcall ip6_tunnel_init+0x0/0xc8 returned 0 after 976 usecs [ 18.191085] calling packet_init+0x0/0x6d @ 1 [ 18.196096] NET: Registered protocol family 17 [ 18.200177] initcall packet_init+0x0/0x6d returned 0 after 4882 usecs [ 18.207026] calling ipsec_pfkey_init+0x0/0xac @ 1 [ 18.212022] NET: Registered protocol family 15 [ 18.216048] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 3906 usecs [ 18.223022] calling br_init+0x0/0xd3 @ 1 [ 18.228429] initcall br_init+0x0/0xd3 returned 0 after 976 usecs [ 18.234023] calling dsa_init_module+0x0/0x3b @ 1 [ 18.239024] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 18.245021] calling edsa_init_module+0x0/0x3b @ 1 [ 18.250023] initcall edsa_init_module+0x0/0x3b returned 0 after 0 usecs [ 18.257022] calling trailer_init_module+0x0/0x3b @ 1 [ 18.262023] initcall trailer_init_module+0x0/0x3b returned 0 after 0 usecs [ 18.269022] calling mv88e6060_init+0x0/0x3b @ 1 [ 18.273051] initcall mv88e6060_init+0x0/0x3b returned 0 after 0 usecs [ 18.280022] calling mv88e6123_61_65_init+0x0/0x3b @ 1 [ 18.285023] initcall mv88e6123_61_65_init+0x0/0x3b returned 0 after 0 usecs [ 18.292021] calling mv88e6131_init+0x0/0x3b @ 1 [ 18.296023] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs [ 18.303022] calling dsa_init_module+0x0/0x39 @ 1 [ 18.308564] initcall dsa_init_module+0x0/0x39 returned 0 after 0 usecs [ 18.315022] calling ipx_init+0x0/0x120 @ 1 [ 18.319977] NET: Registered protocol family 4 [ 18.326102] initcall ipx_init+0x0/0x120 returned 0 after 6835 usecs [ 18.332023] calling atalk_init+0x0/0xb3 @ 1 [ 18.337023] NET: Registered protocol family 5 [ 18.345117] initcall atalk_init+0x0/0xb3 returned 0 after 7812 usecs [ 18.351023] calling x25_init+0x0/0x85 @ 1 [ 18.356023] NET: Registered protocol family 9 [ 18.360025] X.25 for Linux Version 0.2 [ 18.364079] initcall x25_init+0x0/0x85 returned 0 after 7812 usecs [ 18.370023] calling can_init+0x0/0x144 @ 1 [ 18.374021] can: controller area network core (rev 20090105 abi 8) [ 18.381519] NET: Registered protocol family 29 [ 18.386028] initcall can_init+0x0/0x144 returned 0 after 11718 usecs [ 18.392022] calling raw_module_init+0x0/0x61 @ 1 [ 18.397020] can: raw protocol (rev 20090105) [ 18.401050] initcall raw_module_init+0x0/0x61 returned 0 after 3906 usecs [ 18.408022] calling bcm_module_init+0x0/0x7f @ 1 [ 18.413020] can: broadcast manager protocol (rev 20090105 t) [ 18.418038] initcall bcm_module_init+0x0/0x7f returned 0 after 4882 usecs [ 18.425023] calling irlan_init+0x0/0xfd @ 1 [ 18.430455] initcall irlan_init+0x0/0xfd returned 0 after 976 usecs [ 18.437023] calling l2cap_init+0x0/0x10a @ 1 [ 18.441073] Bluetooth: L2CAP ver 2.13 [ 18.445021] Bluetooth: L2CAP socket layer initialized [ 18.450022] initcall l2cap_init+0x0/0x10a returned 0 after 8789 usecs [ 18.456022] calling rfcomm_init+0x0/0xdf @ 1 [ 18.461257] Bluetooth: RFCOMM socket layer initialized [ 18.466054] Bluetooth: RFCOMM TTY layer initialized [ 18.471021] Bluetooth: RFCOMM ver 1.11 [ 18.475023] initcall rfcomm_init+0x0/0xdf returned 0 after 13671 usecs [ 18.481022] calling hidp_init+0x0/0x81 @ 1 [ 18.485021] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 18.492140] initcall hidp_init+0x0/0x81 returned 0 after 6835 usecs [ 18.498023] calling init_sunrpc+0x0/0x83 @ 1 [ 18.505364] RPC: Registered udp transport module. [ 18.510023] RPC: Registered tcp transport module. [ 18.514029] initcall init_sunrpc+0x0/0x83 returned 0 after 11718 usecs [ 18.521022] calling init_rpcsec_gss+0x0/0x73 @ 1 [ 18.526154] initcall init_rpcsec_gss+0x0/0x73 returned 0 after 0 usecs [ 18.532022] calling init_kerberos_module+0x0/0x55 @ 1 [ 18.537095] initcall init_kerberos_module+0x0/0x55 returned 0 after 976 usecs [ 18.545023] calling init_spkm3_module+0x0/0x55 @ 1 [ 18.550044] initcall init_spkm3_module+0x0/0x55 returned 0 after 0 usecs [ 18.556022] calling xprt_rdma_init+0x0/0xe2 @ 1 [ 18.561021] RPC: Registered rdma transport module. [ 18.566027] initcall xprt_rdma_init+0x0/0xe2 returned 0 after 4882 usecs [ 18.572024] calling svc_rdma_init+0x0/0x172 @ 1 [ 18.578286] initcall svc_rdma_init+0x0/0x172 returned 0 after 976 usecs [ 18.585023] calling af_rxrpc_init+0x0/0x1c6 @ 1 [ 18.593186] NET: Registered protocol family 33 [ 18.597123] initcall af_rxrpc_init+0x0/0x1c6 returned 0 after 6835 usecs [ 18.604063] calling rxkad_init+0x0/0x64 @ 1 [ 18.609197] RxRPC: Registered security type 2 'rxkad' [ 18.614076] initcall rxkad_init+0x0/0x64 returned 0 after 5859 usecs [ 18.620114] calling decnet_init+0x0/0xb4 @ 1 [ 18.625071] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 18.635205] DECnet: Routing cache hash table of 512 buckets, 36Kbytes [ 18.642654] NET: Registered protocol family 12 [ 18.647147] initcall decnet_init+0x0/0xb4 returned 0 after 21484 usecs [ 18.653111] calling econet_proto_init+0x0/0x80 @ 1 [ 18.658077] NET: Registered protocol family 19 [ 18.663304] initcall econet_proto_init+0x0/0x80 returned 0 after 4882 usecs [ 18.670028] calling phonet_init+0x0/0x9e @ 1 [ 18.674043] NET: Registered protocol family 35 [ 18.680147] initcall phonet_init+0x0/0x9e returned 0 after 5859 usecs [ 18.686023] calling pep_register+0x0/0x3e @ 1 [ 18.691589] initcall pep_register+0x0/0x3e returned 0 after 0 usecs [ 18.698073] calling vlan_proto_init+0x0/0xeb @ 1 [ 18.702101] 802.1Q VLAN Support v1.8 Ben Greear [ 18.709070] All bugs added by David S. Miller [ 18.715128] initcall vlan_proto_init+0x0/0xeb returned 0 after 12695 usecs [ 18.722023] calling dccp_init+0x0/0x36f @ 1 [ 18.736534] CCID: Activated CCID 2 (TCP-like) [ 18.740032] initcall dccp_init+0x0/0x36f returned 0 after 12695 usecs [ 18.747111] calling dccp_v4_init+0x0/0xae @ 1 [ 18.753392] initcall dccp_v4_init+0x0/0xae returned 0 after 1953 usecs [ 18.760078] calling dccp_v6_init+0x0/0xae @ 1 [ 18.767132] initcall dccp_v6_init+0x0/0xae returned 0 after 1953 usecs [ 18.773077] calling dccp_diag_init+0x0/0x39 @ 1 [ 18.778084] initcall dccp_diag_init+0x0/0x39 returned 0 after 0 usecs [ 18.784025] calling sctp_init+0x0/0x775 @ 1 [ 18.795287] SCTP: Hash tables configured (established 14563 bind 14563) [ 18.803443] sctp_init_sock(sk: ffff88003cf68000) [ 18.808190] initcall sctp_init+0x0/0x775 returned 0 after 18554 usecs [ 18.815169] calling rds_init+0x0/0xf8 @ 1 [ 18.821083] NET: Registered protocol family 21 [ 18.825213] rds_rdma_listen_init(): cm ffff88003ce2bbf0 listening on port 18634 [ 18.834401] Registered RDS/iwarp transport [ 18.839400] Registered RDS/infiniband transport [ 18.844076] initcall rds_init+0x0/0xf8 returned 0 after 24414 usecs [ 18.850154] calling lib80211_init+0x0/0x45 @ 1 [ 18.855064] lib80211: common routines for IEEE802.11 drivers [ 18.861126] lib80211_crypt: registered algorithm 'NULL' [ 18.866073] initcall lib80211_init+0x0/0x45 returned 0 after 10742 usecs [ 18.873026] calling lib80211_crypto_wep_init+0x0/0x39 @ 1 [ 18.878027] lib80211_crypt: registered algorithm 'WEP' [ 18.883024] initcall lib80211_crypto_wep_init+0x0/0x39 returned 0 after 4882 usecs [ 18.891023] calling lib80211_crypto_ccmp_init+0x0/0x39 @ 1 [ 18.897023] lib80211_crypt: registered algorithm 'CCMP' [ 18.902023] initcall lib80211_crypto_ccmp_init+0x0/0x39 returned 0 after 4882 usecs [ 18.910023] calling lib80211_crypto_tkip_init+0x0/0x39 @ 1 [ 18.915024] lib80211_crypt: registered algorithm 'TKIP' [ 18.920024] initcall lib80211_crypto_tkip_init+0x0/0x39 returned 0 after 4882 usecs [ 18.928023] calling tipc_init+0x0/0xdf @ 1 [ 18.932048] TIPC: Activated (version 1.6.4 compiled Aug 4 2009 11:29:57) [ 18.942663] NET: Registered protocol family 30 [ 18.947023] TIPC: Started in single node mode [ 18.951028] initcall tipc_init+0x0/0xdf returned 0 after 18554 usecs [ 18.957023] calling dcbnl_init+0x0/0x59 @ 1 [ 18.962023] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs [ 18.968023] calling ieee802154_nl_init+0x0/0xb4 @ 1 [ 18.977082] initcall ieee802154_nl_init+0x0/0xb4 returned 0 after 3906 usecs [ 18.984024] calling af_ieee802154_init+0x0/0x9b @ 1 [ 18.990449] NET: Registered protocol family 36 [ 18.995079] initcall af_ieee802154_init+0x0/0x9b returned 0 after 5859 usecs [ 19.002098] calling wimax_subsys_init+0x0/0x25a @ 1 [ 19.011121] initcall wimax_subsys_init+0x0/0x25a returned 0 after 3906 usecs [ 19.018028] calling severities_debugfs_init+0x0/0x83 @ 1 [ 19.024061] initcall severities_debugfs_init+0x0/0x83 returned 0 after 0 usecs [ 19.031023] calling update_mp_table+0x0/0x245 @ 1 [ 19.036023] initcall update_mp_table+0x0/0x245 returned 0 after 0 usecs [ 19.042023] calling lapic_insert_resource+0x0/0x67 @ 1 [ 19.048026] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs [ 19.055023] calling io_apic_bug_finalize+0x0/0x42 @ 1 [ 19.060023] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs [ 19.067023] calling check_early_ioremap_leak+0x0/0x8e @ 1 [ 19.072023] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs [ 19.080023] calling sched_init_debug+0x0/0x4b @ 1 [ 19.084038] initcall sched_init_debug+0x0/0x4b returned 0 after 0 usecs [ 19.091023] calling init_oops_id+0x0/0x5d @ 1 [ 19.095022] initcall init_oops_id+0x0/0x5d returned 0 after 0 usecs [ 19.102022] calling disable_boot_consoles+0x0/0x99 @ 1 [ 19.107023] initcall disable_boot_consoles+0x0/0x99 returned 0 after 0 usecs [ 19.114022] calling pm_qos_power_init+0x0/0xf0 @ 1 [ 19.120287] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 976 usecs [ 19.127023] calling taskstats_init+0x0/0xbe @ 1 [ 19.132074] registered taskstats version 1 [ 19.136027] initcall taskstats_init+0x0/0xbe returned 0 after 3906 usecs [ 19.143022] calling clear_boot_tracer+0x0/0x52 @ 1 [ 19.147023] initcall clear_boot_tracer+0x0/0x52 returned 0 after 0 usecs [ 19.154023] calling event_trace_self_tests_init+0x0/0x68 @ 1 [ 19.160021] Running tests on trace events: [ 19.164021] Testing event kfree_skb: OK [ 19.172064] Testing event block_rq_abort: OK [ 19.180590] Testing event block_rq_insert: OK [ 19.189589] Testing event block_rq_issue: OK [ 19.198589] Testing event block_rq_requeue: OK [ 19.207589] Testing event block_rq_complete: OK [ 19.216589] Testing event block_bio_bounce: OK [ 19.225589] Testing event block_bio_complete: OK [ 19.234589] Testing event block_bio_backmerge: OK [ 19.243557] Testing event block_bio_frontmerge: OK [ 19.252677] Testing event block_bio_queue: OK [ 19.261593] Testing event block_getrq: OK [ 19.269588] Testing event block_sleeprq: OK [ 19.279019] Testing event block_plug: OK [ 19.286669] Testing event block_unplug_timer: OK [ 19.295541] Testing event block_unplug_io: OK [ 19.304667] Testing event block_split: OK [ 19.313589] Testing event block_remap: OK [ 19.321589] Testing event gfs2_glock_state_change: OK [ 19.330589] Testing event gfs2_glock_put: OK [ 19.339589] Testing event gfs2_demote_rq: OK [ 19.348589] Testing event gfs2_promote: OK [ 19.357589] Testing event gfs2_glock_queue: OK [ 19.366589] Testing event gfs2_pin: OK [ 19.374589] Testing event gfs2_log_flush: OK [ 19.383589] Testing event gfs2_log_blocks: OK [ 19.392591] Testing event gfs2_bmap: OK [ 19.400589] Testing event gfs2_block_alloc: OK [ 19.409589] Testing event jbd2_checkpoint: OK [ 19.418589] Testing event jbd2_start_commit: OK [ 19.427589] Testing event jbd2_commit_locking: OK [ 19.436539] Testing event jbd2_commit_flushing: OK [ 19.445667] Testing event jbd2_commit_logging: OK [ 19.454593] Testing event jbd2_end_commit: OK [ 19.463589] Testing event jbd2_submit_inode_data: OK [ 19.472589] Testing event kmalloc: OK [ 19.480589] Testing event kmem_cache_alloc: OK [ 19.489589] Testing event kmalloc_node: OK [ 19.498589] Testing event kmem_cache_alloc_node: OK [ 19.507589] Testing event kfree: OK [ 19.515590] Testing event kmem_cache_free: OK [ 19.524589] Testing event lock_acquire: OK [ 19.533633] Testing event lock_release: OK [ 19.542601] Testing event lock_contended: OK [ 19.551589] Testing event lock_acquired: OK [ 19.560591] Testing event workqueue_insertion: OK [ 19.569673] Testing event workqueue_execution: OK [ 19.578598] Testing event workqueue_creation: OK [ 19.587592] Testing event workqueue_destruction: OK [ 19.596592] Testing event irq_handler_entry: OK [ 19.605589] Testing event irq_handler_exit: OK [ 19.614589] Testing event softirq_entry: OK [ 19.623539] Testing event softirq_exit: OK [ 19.632591] Testing event sched_kthread_stop: OK [ 19.641593] Testing event sched_kthread_stop_ret: OK [ 19.650589] Testing event sched_wait_task: OK [ 19.659589] Testing event sched_wakeup: OK [ 19.668591] Testing event sched_wakeup_new: OK [ 19.677594] Testing event sched_switch: OK [ 19.686591] Testing event sched_migrate_task: OK [ 19.695589] Testing event sched_process_free: OK [ 19.704458] Testing event sched_process_exit: OK [ 19.713589] Testing event sched_process_wait: OK [ 19.722589] Testing event sched_process_fork: OK [ 19.731589] Testing event sched_signal_send: OK [ 19.740589] Running tests on trace event systems: [ 19.745076] Testing event system skb: OK [ 19.753589] Testing event system block: OK [ 19.762753] Testing event system gfs2: OK [ 19.771630] Testing event system jbd2: OK [ 19.780590] Testing event system kmem: OK [ 19.789590] Testing event system lockdep: OK [ 19.798619] Testing event system workqueue: OK [ 19.807612] Testing event system irq: OK [ 19.815591] Testing event system sched: OK [ 19.824650] Running tests on all trace events: [ 19.829075] Testing all events: OK [ 19.840028] Running tests again, along with the function tracer [ 19.846315] Running tests on trace events: [ 19.851255] Testing event kfree_skb: OK [ 19.860681] Testing event block_rq_abort: OK [ 19.869687] Testing event block_rq_insert: OK [ 19.879681] Testing event block_rq_issue: OK [ 19.888687] Testing event block_rq_requeue: OK [ 19.898681] Testing event block_rq_complete: OK [ 19.908897] Testing event block_bio_bounce: OK [ 19.918680] Testing event block_bio_complete: OK [ 19.928685] Testing event block_bio_backmerge: OK [ 19.938687] Testing event block_bio_frontmerge: OK [ 19.948682] Testing event block_bio_queue: OK [ 19.958684] Testing event block_getrq: OK [ 19.967681] Testing event block_sleeprq: OK [ 19.976680] Testing event block_plug: OK [ 19.985687] Testing event block_unplug_timer: OK [ 19.995890] Testing event block_unplug_io: OK [ 20.005683] Testing event block_split: OK [ 20.014684] Testing event block_remap: OK [ 20.023688] Testing event gfs2_glock_state_change: OK [ 20.033682] Testing event gfs2_glock_put: OK [ 20.042681] Testing event gfs2_demote_rq: OK [ 20.051687] Testing event gfs2_promote: OK [ 20.060895] Testing event gfs2_glock_queue: OK [ 20.070685] Testing event gfs2_pin: OK [ 20.079684] Testing event gfs2_log_flush: OK [ 20.088681] Testing event gfs2_log_blocks: OK [ 20.098684] Testing event gfs2_bmap: OK [ 20.107684] Testing event gfs2_block_alloc: OK [ 20.117687] Testing event jbd2_checkpoint: OK [ 20.127681] Testing event jbd2_start_commit: OK [ 20.137895] Testing event jbd2_commit_locking: OK [ 20.147683] Testing event jbd2_commit_flushing: OK [ 20.157681] Testing event jbd2_commit_logging: OK [ 20.167684] Testing event jbd2_end_commit: OK [ 20.177681] Testing event jbd2_submit_inode_data: OK [ 20.187682] Testing event kmalloc: OK [ 20.196682] Testing event kmem_cache_alloc: OK [ 20.206685] Testing event kmalloc_node: OK [ 20.215892] Testing event kmem_cache_alloc_node: OK [ 20.225683] Testing event kfree: OK [ 20.234894] Testing event kmem_cache_free: OK [ 20.244684] Testing event lock_acquire: OK [ 20.253955] Testing event lock_release: OK [ 20.263687] Testing event lock_contended: OK [ 20.273681] Testing event lock_acquired: OK [ 20.282691] Testing event workqueue_insertion: OK [ 20.292674] Testing event workqueue_execution: OK [ 20.302677] Testing event workqueue_creation: OK [ 20.312882] Testing event workqueue_destruction: OK [ 20.322670] Testing event irq_handler_entry: OK [ 20.332897] Testing event irq_handler_exit: OK [ 20.342678] Testing event softirq_entry: OK [ 20.351681] Testing event softirq_exit: OK [ 20.360897] Testing event sched_kthread_stop: OK [ 20.370685] Testing event sched_kthread_stop_ret: OK [ 20.380682] Testing event sched_wait_task: OK [ 20.390684] Testing event sched_wakeup: OK [ 20.399904] Testing event sched_wakeup_new: OK [ 20.409675] Testing event sched_switch: OK [ 20.418921] Testing event sched_migrate_task: OK [ 20.428686] Testing event sched_process_free: OK [ 20.438681] Testing event sched_process_exit: OK [ 20.448896] Testing event sched_process_wait: OK [ 20.458685] Testing event sched_process_fork: OK [ 20.468682] Testing event sched_signal_send: OK [ 20.478895] Running tests on trace event systems: [ 20.484145] Testing event system skb: OK [ 20.492692] Testing event system block: OK [ 20.503948] Testing event system gfs2: OK [ 20.514466] Testing event system jbd2: OK [ 20.524035] Testing event system kmem: OK [ 20.534034] Testing event system lockdep: OK [ 20.544034] Testing event system workqueue: OK [ 20.553866] Testing event system irq: OK [ 20.564034] Testing event system sched: OK [ 20.574657] Running tests on all trace events: [ 20.579141] Testing all events: OK [ 20.599271] initcall event_trace_self_tests_init+0x0/0x68 returned 0 after 1406250 usecs [ 20.608137] calling fail_page_alloc_debugfs+0x0/0x10e @ 1 [ 20.614021] initcall fail_page_alloc_debugfs+0x0/0x10e returned 0 after 976 usecs [ 20.621052] calling max_swapfiles_check+0x0/0x2d @ 1 [ 20.626075] initcall max_swapfiles_check+0x0/0x2d returned 0 after 0 usecs [ 20.633034] calling failslab_debugfs_init+0x0/0x91 @ 1 [ 20.639020] initcall failslab_debugfs_init+0x0/0x91 returned 0 after 0 usecs [ 20.646025] calling afs_init+0x0/0x1d0 @ 1 [ 20.650023] kAFS: Red Hat AFS client v0.1 registering. [ 20.657227] initcall afs_init+0x0/0x1d0 returned 0 after 6835 usecs [ 20.663214] calling fail_make_request_debugfs+0x0/0x40 @ 1 [ 20.669195] initcall fail_make_request_debugfs+0x0/0x40 returned 0 after 0 usecs [ 20.676071] calling fail_io_timeout_debugfs+0x0/0x40 @ 1 [ 20.682166] initcall fail_io_timeout_debugfs+0x0/0x40 returned 0 after 0 usecs [ 20.689024] calling random32_reseed+0x0/0xce @ 1 [ 20.694045] initcall random32_reseed+0x0/0xce returned 0 after 0 usecs [ 20.700024] calling pci_resource_alignment_sysfs_init+0x0/0x40 @ 1 [ 20.707052] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 20.715024] calling pci_sysfs_init+0x0/0x77 @ 1 [ 20.720520] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs [ 20.726025] calling boot_wait_for_devices+0x0/0x40 @ 1 [ 20.732024] initcall boot_wait_for_devices+0x0/0x40 returned 0 after 0 usecs [ 20.739023] calling seqgen_init+0x0/0x36 @ 1 [ 20.743063] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs [ 20.749024] calling hd_init+0x0/0x321 @ 1 [ 20.753158] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 20.761352] initcall hd_init+0x0/0x321 returned -1 after 8789 usecs [ 20.768025] initcall hd_init+0x0/0x321 returned with error code -1 [ 20.774026] calling scsi_complete_async_scans+0x0/0x13b @ 1 [ 20.780024] initcall scsi_complete_async_scans+0x0/0x13b returned 0 after 0 usecs [ 20.787025] calling rtc_hctosys+0x0/0x193 @ 1 [ 20.792109] rtc_cmos rtc_cmos: setting system clock to 2009-08-04 15:30:19 UTC (1249399819) [ 20.800025] initcall rtc_hctosys+0x0/0x193 returned 0 after 7812 usecs [ 20.807025] calling edd_init+0x0/0x248 @ 1 [ 20.811023] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 20.817943] initcall edd_init+0x0/0x248 returned 0 after 5859 usecs [ 20.824025] calling memmap_init+0x0/0xce @ 1 [ 20.828230] initcall memmap_init+0x0/0xce returned 0 after 0 usecs [ 20.834025] calling init_net_drop_monitor+0x0/0x1a4 @ 1 [ 20.840022] Initalizing network drop monitor service [ 20.845194] initcall init_net_drop_monitor+0x0/0x1a4 returned 0 after 4882 usecs [ 20.852025] calling tcp_congestion_default+0x0/0x39 @ 1 [ 20.858026] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs [ 20.865024] calling initialize_hashrnd+0x0/0x40 @ 1 [ 20.870031] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs [ 20.877135] async_waiting @ 1 [ 20.880070] async_continuing @ 1 after 0 usec [ 20.884195] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 20.894261] EXT3-fs: INFO: recovery required on readonly filesystem. [ 20.901055] EXT3-fs: write access will be enabled during recovery. [ 20.942174] EXT3-fs: recovery complete. [ 20.946344] kjournald starting. Commit interval 5 seconds [ 20.947076] EXT3-fs: mounted filesystem with ordered data mode. [ 20.947240] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 20.947341] async_waiting @ 1 [ 20.947345] async_continuing @ 1 after 0 usec [ 20.947349] debug: unmapping init memory ffffffff8288f000..ffffffff82bdd000 [ 20.979189] Write protecting the kernel read-only data: 21532k [ 27.160060] eeprom 1-0050: uevent [ 27.163506] eeprom 1-0051: uevent [ 29.979141] eth1: link down [ 29.983051] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 38.425105] EXT3 FS on sda6, internal journal [ 38.563428] kjournald starting. Commit interval 5 seconds [ 38.569077] EXT3 FS on sda5, internal journal [ 38.573045] EXT3-fs: mounted filesystem with ordered data mode. [ 39.653549] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k [ 40.876035] eth0: no IPv6 routers present [ 41.433214] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)