From: akpm@linux-foundation.org
To: alan@lxorguk.ukuu.org.uk
Cc: linux-serial@vger.kernel.org, akpm@linux-foundation.org,
anemo@mba.ocn.ne.jp, ralf@linux-mips.org
Subject: [patch 1/5] serial_txx9: use container_of() instead of direct cast
Date: Thu, 06 Aug 2009 16:08:18 -0700 [thread overview]
Message-ID: <200908062308.n76N8ION009596@imap1.linux-foundation.org> (raw)
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/serial/serial_txx9.c | 39 ++++++++++++++++++---------------
1 file changed, 22 insertions(+), 17 deletions(-)
diff -puN drivers/serial/serial_txx9.c~serial_txx9-use-container_of-instead-of-direct-cast drivers/serial/serial_txx9.c
--- a/drivers/serial/serial_txx9.c~serial_txx9-use-container_of-instead-of-direct-cast
+++ a/drivers/serial/serial_txx9.c
@@ -221,21 +221,26 @@ sio_quot_set(struct uart_txx9_port *up,
sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
}
+static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
+{
+ return container_of(port, struct uart_txx9_port, port);
+}
+
static void serial_txx9_stop_tx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
static void serial_txx9_start_tx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
static void serial_txx9_stop_rx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
}
@@ -246,7 +251,7 @@ static void serial_txx9_enable_ms(struct
static void serial_txx9_initialize(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int tmout = 10000;
sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
@@ -414,7 +419,7 @@ static irqreturn_t serial_txx9_interrupt
static unsigned int serial_txx9_tx_empty(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
unsigned int ret;
@@ -427,7 +432,7 @@ static unsigned int serial_txx9_tx_empty
static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int ret;
/* no modem control lines */
@@ -440,7 +445,7 @@ static unsigned int serial_txx9_get_mctr
static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
if (mctrl & TIOCM_RTS)
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
@@ -450,7 +455,7 @@ static void serial_txx9_set_mctrl(struct
static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
@@ -494,7 +499,7 @@ static int serial_txx9_get_poll_char(str
{
unsigned int ier;
unsigned char c;
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
@@ -520,7 +525,7 @@ static int serial_txx9_get_poll_char(str
static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
{
unsigned int ier;
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
@@ -551,7 +556,7 @@ static void serial_txx9_put_poll_char(st
static int serial_txx9_startup(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
int retval;
@@ -596,7 +601,7 @@ static int serial_txx9_startup(struct ua
static void serial_txx9_shutdown(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
/*
@@ -636,7 +641,7 @@ static void
serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
@@ -814,19 +819,19 @@ static void serial_txx9_release_resource
static void serial_txx9_release_port(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
serial_txx9_release_resource(up);
}
static int serial_txx9_request_port(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
return serial_txx9_request_resource(up);
}
static void serial_txx9_config_port(struct uart_port *port, int uflags)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
int ret;
/*
@@ -897,7 +902,7 @@ static void __init serial_txx9_register_
static void serial_txx9_console_putchar(struct uart_port *port, int ch)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
wait_for_xmitr(up);
sio_out(up, TXX9_SITFIFO, ch);
_
next reply other threads:[~2009-08-06 23:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-06 23:08 akpm [this message]
2009-09-18 19:55 [patch 1/5] serial_txx9: use container_of() instead of direct cast akpm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908062308.n76N8ION009596@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-serial@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.