* Ingo Molnar wrote: > > rcu: Add second diagnostic check for a possible CPU-hotplug race > > has a build problem too: > > kernel/built-in.o: In function `rcu_cpu_notified': > (.text+0x1d787): undefined reference to `cpu_notified' > kernel/built-in.o: In function `rcu_init': > (.init.text+0x1174): undefined reference to `cpu_notified' > kernel/built-in.o: In function `rcu_init': > (.init.text+0x11a8): undefined reference to `cpu_notified' > > Maybe we should simplify all those Kconfig rules? It's a maze. a testbox still managed to sneak in, build another config, boot it and trigger the warning below - is this what you were after? Bootlog below, config attached. Ingo [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc5-tip (mingo@europe) (gcc version 4.2.2) #7134 SMP Sun Aug 9 13:04:19 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] modified: 000000007f6e0000 - 000000007f6f3000 (ACPI data) [ 0.000000] modified: 000000007f6f3000 - 000000007f700000 (ACPI NVS) [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] ACPI: RSDP 000f68a0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 7f6e631f 00074 (v01 LENOVO TP-79 00001020 LTP 00000000) [ 0.000000] ACPI: FACP 7f6e6400 000F4 (v03 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 7f6e65e7 0C765 (v01 LENOVO TP-79 00001020 MSFT 0100000E) [ 0.000000] ACPI: FACS 7f6f4000 00040 [ 0.000000] ACPI: SSDT 7f6e65b4 00033 (v01 LENOVO TP-79 00001020 MSFT 0100000E) [ 0.000000] ACPI: ECDT 7f6f2d4c 00052 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: TCPA 7f6f2d9e 00032 (v02 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: APIC 7f6f2dd0 00068 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: MCFG 7f6f2e38 0003E (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: HPET 7f6f2e76 00038 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: BOOT 7f6f2fd8 00028 (v01 LENOVO TP-79 00001020 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6e58da 00507 (v01 LENOVO TP-79 00001020 INTL 20050513) [ 0.000000] ACPI: SSDT 7f6e5702 001D8 (v01 LENOVO TP-79 00001020 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00018150c8] TEXT DATA BSS ==> [0001000000 - 00018150c8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001816000 - 000181d138] BRK ==> [0001816000 - 000181d138] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f68e0] f68e0 [ 0.000000] mpc: 9f5a1-9f6b5 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6e0 [ 0.000000] On node 0 totalpages: 521851 [ 0.000000] free_area_init_node: node 0, pgdat c16f3c20, node_mem_map c181e000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292324 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2818000, static data 33436 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517773 [ 0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 3 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.21/00:30:48:c6:86:26 [ 0.000000] kernel profiling enabled (shift: 0) [ 0.000000] debug: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0) [ 0.000000] Memory: 2061020k/2087808k available (4496k kernel code, 25604k reserved, 2686k data, 376k init, 1178504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc170b000 - 0xc1769000 ( 376 kB) [ 0.000000] .data : 0xc14643fd - 0xc1703f68 (2686 kB) [ 0.000000] .text : 0xc1000000 - 0xc14643fd (4496 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at kernel/rcupdate.c:259 rcu_init+0x2b/0xa0() [ 0.000000] Hardware name: 1951A26 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #7134 [ 0.000000] Call Trace: [ 0.000000] [] warn_slowpath_common+0x60/0x77 [ 0.000000] [] warn_slowpath_null+0xd/0x10 [ 0.000000] [] rcu_init+0x2b/0xa0 [ 0.000000] [] start_kernel+0x184/0x2ca [ 0.000000] [] __init_begin+0x6a/0x6f [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.477 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3656.95 BogoMIPS (lpj=1828477) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.001013] Initializing cgroup subsys freezer [ 0.001119] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001249] CPU: L2 cache: 2048K [ 0.001336] CPU: Physical Processor ID: 0 [ 0.001422] CPU: Processor Core ID: 0 [ 0.001510] mce: CPU supports 6 MCE banks [ 0.001605] CPU0: Thermal monitoring enabled (TM2) [ 0.001694] using mwait in idle threads. [ 0.001786] Performance Counters: no PMU driver, software counters only. [ 0.002005] Checking 'hlt' instruction... OK. [ 0.006584] ACPI: Core revision 20090521 [ 0.027076] enabled ExtINT on CPU#0 [ 0.028075] ENABLING IO-APIC IRQs [ 0.028161] init IO_APIC IRQs [ 0.028246] 1-0 (apicid-pin) not connected [ 0.028377] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.028508] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.028640] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.028772] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.028904] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.029001] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.029132] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.029264] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.029397] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.029528] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.029659] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.029791] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.029923] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.030000] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.030131] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.030261] 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected [ 0.030875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.041069] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 0.041248] Using local APIC timer interrupts. [ 0.041250] calibrating APIC timer ... [ 0.041993] ... lapic delta = 1039050 [ 0.041993] ... PM-Timer delta = 357950 [ 0.041993] ... PM-Timer result ok [ 0.041993] ..... delta 1039050 [ 0.041993] ..... mult: 44633642 [ 0.041993] ..... calibration result: 166248 [ 0.041993] ..... CPU clock speed is 1828.0727 MHz. [ 0.041993] ..... host bus clock speed is 166.0248 MHz. [ 0.041993] calling migration_init+0x0/0x47 @ 1 [ 0.041993] initcall migration_init+0x0/0x47 returned 0 after 0 usecs [ 0.041993] calling spawn_ksoftirqd+0x0/0x47 @ 1 [ 0.041993] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs [ 0.041993] calling init_call_single_data+0x0/0x6d @ 1 [ 0.041993] initcall init_call_single_data+0x0/0x6d returned 0 after 0 usecs [ 0.041993] calling relay_init+0x0/0x11 @ 1 [ 0.041993] initcall relay_init+0x0/0x11 returned 0 after 0 usecs [ 0.041993] calling tracer_alloc_buffers+0x0/0x12d @ 1 [ 0.041993] initcall tracer_alloc_buffers+0x0/0x12d returned 0 after 0 usecs [ 0.041998] calling init_trace_printk+0x0/0xf @ 1 [ 0.042087] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs [ 0.042253] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 3657.34 BogoMIPS (lpj=1828674) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.113434] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 0.114126] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.114982] Measured 579865 cycles TSC warp between CPUs, turning off TSC clock. [ 0.114982] Marking TSC unstable due to check_tsc_sync_source failed [ 0.115008] Brought up 2 CPUs [ 0.115095] Total of 2 processors activated (7314.30 BogoMIPS). [ 0.116092] khelper used greatest stack depth: 6944 bytes left [ 0.116167] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 [ 0.116167] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs [ 0.116275] calling net_ns_init+0x0/0xc0 @ 1 [ 0.116384] initcall net_ns_init+0x0/0xc0 returned 0 after 0 usecs [ 0.116384] calling e820_mark_nvs_memory+0x0/0x37 @ 1 [ 0.116989] initcall e820_mark_nvs_memory+0x0/0x37 returned 0 after 0 usecs [ 0.117084] calling cpufreq_tsc+0x0/0x25 @ 1 [ 0.117172] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs [ 0.117265] calling pci_reboot_init+0x0/0x11 @ 1 [ 0.117355] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.117447] calling reboot_init+0x0/0x11 @ 1 [ 0.117540] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs [ 0.117633] calling init_lapic_sysfs+0x0/0x28 @ 1 [ 0.117730] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs [ 0.117989] calling init_smp_flush+0x0/0x20 @ 1 [ 0.118078] initcall init_smp_flush+0x0/0x20 returned 0 after 0 usecs [ 0.118172] calling alloc_frozen_cpus+0x0/0x9 @ 1 [ 0.118262] initcall alloc_frozen_cpus+0x0/0x9 returned 0 after 0 usecs [ 0.118355] calling sysctl_init+0x0/0x29 @ 1 [ 0.118584] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs [ 0.118676] calling ksysfs_init+0x0/0x96 @ 1 [ 0.118773] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs [ 0.118865] calling async_init+0x0/0x3c @ 1 [ 0.118954] initcall async_init+0x0/0x3c returned 0 after 0 usecs [ 0.118986] calling init_jiffies_clocksource+0x0/0xf @ 1 [ 0.119078] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs [ 0.119206] calling pm_init+0x0/0x2d @ 1 [ 0.119299] initcall pm_init+0x0/0x2d returned 0 after 0 usecs [ 0.119389] calling pm_disk_init+0x0/0x14 @ 1 [ 0.119480] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs [ 0.119573] calling swsusp_header_init+0x0/0x26 @ 1 [ 0.119663] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs [ 0.119756] calling init_hw_breakpoint+0x0/0xf @ 1 [ 0.119848] initcall init_hw_breakpoint+0x0/0xf returned 0 after 0 usecs [ 0.119986] calling filelock_init+0x0/0x27 @ 1 [ 0.120075] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs [ 0.120167] calling init_misc_binfmt+0x0/0x35 @ 1 [ 0.120259] initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs [ 0.120351] calling init_script_binfmt+0x0/0x11 @ 1 [ 0.120442] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs [ 0.120534] calling init_elf_binfmt+0x0/0x11 @ 1 [ 0.120623] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs [ 0.120716] calling debugfs_init+0x0/0x4a @ 1 [ 0.120808] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs [ 0.120901] calling random32_init+0x0/0xa4 @ 1 [ 0.120985] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs [ 0.121079] calling early_resume_init+0x0/0x183 @ 1 [ 0.121985] Time: 11:05:10 Date: 08/09/09 [ 0.122072] initcall early_resume_init+0x0/0x183 returned 0 after 976 usecs [ 0.122164] calling cpufreq_core_init+0x0/0x59 @ 1 [ 0.122253] initcall cpufreq_core_init+0x0/0x59 returned 0 after 0 usecs [ 0.122345] calling cpuidle_init+0x0/0x32 @ 1 [ 0.122437] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs [ 0.122529] calling sock_init+0x0/0x51 @ 1 [ 0.122662] initcall sock_init+0x0/0x51 returned 0 after 0 usecs [ 0.122754] calling net_inuse_init+0x0/0x1f @ 1 [ 0.122845] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs [ 0.122937] calling netpoll_init+0x0/0x11 @ 1 [ 0.122985] initcall netpoll_init+0x0/0x11 returned 0 after 0 usecs [ 0.123077] calling netlink_proto_init+0x0/0x102 @ 1 [ 0.123170] NET: Registered protocol family 16 [ 0.123269] initcall netlink_proto_init+0x0/0x102 returned 0 after 0 usecs [ 0.123362] calling bdi_class_init+0x0/0x35 @ 1 [ 0.123464] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs [ 0.123464] calling kobject_uevent_init+0x0/0x4e @ 1 [ 0.123464] initcall kobject_uevent_init+0x0/0x4e returned 0 after 0 usecs [ 0.123464] calling pcibus_class_init+0x0/0x14 @ 1 [ 0.123464] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs [ 0.123992] calling pci_driver_init+0x0/0xf @ 1 [ 0.124091] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs [ 0.124091] calling backlight_class_init+0x0/0x4d @ 1 [ 0.124182] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs [ 0.124182] calling video_output_class_init+0x0/0x14 @ 1 [ 0.124182] initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs [ 0.124182] calling tty_class_init+0x0/0x28 @ 1 [ 0.124212] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs [ 0.124987] calling vtconsole_class_init+0x0/0xa1 @ 1 [ 0.125087] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs [ 0.125087] calling i2c_init+0x0/0x54 @ 1 [ 0.125177] initcall i2c_init+0x0/0x54 returned 0 after 0 usecs [ 0.125177] calling amd_postcore_init+0x0/0x66 @ 1 [ 0.125177] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs [ 0.125260] calling arch_kdebugfs_init+0x0/0x261 @ 1 [ 0.125361] initcall arch_kdebugfs_init+0x0/0x261 returned 0 after 0 usecs [ 0.125986] calling init_pit_clocksource+0x0/0x94 @ 1 [ 0.126077] initcall init_pit_clocksource+0x0/0x94 returned 0 after 0 usecs [ 0.126170] calling mtrr_if_init+0x0/0x44 @ 1 [ 0.126261] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs [ 0.126353] calling ffh_cstate_init+0x0/0x27 @ 1 [ 0.126442] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs [ 0.126535] calling kdump_buf_page_init+0x0/0x54 @ 1 [ 0.126626] initcall kdump_buf_page_init+0x0/0x54 returned 0 after 0 usecs [ 0.126719] calling acpi_pci_init+0x0/0x4c @ 1 [ 0.126807] ACPI: bus type pci registered [ 0.126895] initcall acpi_pci_init+0x0/0x4c returned 0 after 0 usecs [ 0.126983] calling dmi_id_init+0x0/0x28f @ 1 [ 0.127083] initcall dmi_id_init+0x0/0x28f returned 0 after 0 usecs [ 0.127083] calling pci_arch_init+0x0/0x53 @ 1 [ 0.127190] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.127283] PCI: MCFG area at f0000000 reserved in E820 [ 0.127372] PCI: Using MMCONFIG for extended config space [ 0.127461] PCI: Using configuration type 1 for base access [ 0.127560] initcall pci_arch_init+0x0/0x53 returned 0 after 0 usecs [ 0.127653] calling topology_init+0x0/0x36 @ 1 [ 0.128010] initcall topology_init+0x0/0x36 returned 0 after 976 usecs [ 0.128103] calling mtrr_init_finialize+0x0/0x35 @ 1 [ 0.128193] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs [ 0.128287] calling param_sysfs_init+0x0/0x1a6 @ 1 [ 0.138109] initcall param_sysfs_init+0x0/0x1a6 returned 0 after 9764 usecs [ 0.138109] calling pm_sysrq_init+0x0/0x16 @ 1 [ 0.138195] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs [ 0.138287] calling audit_watch_init+0x0/0x27 @ 1 [ 0.138376] initcall audit_watch_init+0x0/0x27 returned 0 after 0 usecs [ 0.138469] calling default_bdi_init+0x0/0x2f @ 1 [ 0.138584] initcall default_bdi_init+0x0/0x2f returned 0 after 0 usecs [ 0.138584] calling init_bio+0x0/0xc0 @ 1 [ 0.139024] bio: create slab at 0 [ 0.139118] initcall init_bio+0x0/0xc0 returned 0 after 0 usecs [ 0.139210] calling fsnotify_init+0x0/0xf @ 1 [ 0.139300] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs [ 0.139392] calling fsnotify_notification_init+0x0/0x5b @ 1 [ 0.139485] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs [ 0.139615] calling cryptomgr_init+0x0/0xf @ 1 [ 0.139704] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs [ 0.139795] calling blk_settings_init+0x0/0x1d @ 1 [ 0.139885] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs [ 0.140016] calling blk_ioc_init+0x0/0x24 @ 1 [ 0.140106] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs [ 0.140198] calling blk_softirq_init+0x0/0x5b @ 1 [ 0.140288] initcall blk_softirq_init+0x0/0x5b returned 0 after 0 usecs [ 0.140379] calling genhd_device_init+0x0/0x50 @ 1 [ 0.140516] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs [ 0.140516] calling pci_slot_init+0x0/0x3b @ 1 [ 0.140516] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs [ 0.140516] calling fbmem_init+0x0/0x78 @ 1 [ 0.140516] initcall fbmem_init+0x0/0x78 returned 0 after 0 usecs [ 0.141018] calling acpi_init+0x0/0x25e @ 1 [ 0.142435] ACPI: EC: EC description table is found, configuring boot EC [ 0.150150] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.156229] ACPI: Interpreter enabled [ 0.156318] ACPI: (supports S0 S3 S4 S5) [ 0.156596] ACPI: Using IOAPIC for interrupt routing [ 0.173122] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.173215] ACPI: EC: driver started in interrupt mode [ 0.173323] ACPI: Power Resource [PUBS] (on) [ 0.174221] initcall acpi_init+0x0/0x25e returned 0 after 32221 usecs [ 0.174314] calling dock_init+0x0/0x7d @ 1 [ 0.177366] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.177460] initcall dock_init+0x0/0x7d returned 0 after 2929 usecs [ 0.177553] calling acpi_pci_root_init+0x0/0x25 @ 1 [ 0.177668] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.177785] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff] [ 0.177979] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.178072] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.178166] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff] [ 0.178296] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff] [ 0.178500] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff] [ 0.178650] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.178743] pci 0000:00:1b.0: PME# disabled [ 0.178913] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.178978] pci 0000:00:1c.0: PME# disabled [ 0.179149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.179243] pci 0000:00:1c.1: PME# disabled [ 0.179414] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.179508] pci 0000:00:1c.2: PME# disabled [ 0.179678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.179771] pci 0000:00:1c.3: PME# disabled [ 0.179919] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.180039] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.180191] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.180342] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.180498] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff] [ 0.180649] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.180744] pci 0000:00:1d.7: PME# disabled [ 0.181077] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.181209] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.181303] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.181435] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.181567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.181748] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.181843] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.181939] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.181980] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.182075] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.182227] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7] [ 0.182323] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7] [ 0.182419] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf] [ 0.182514] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3] [ 0.182610] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] [ 0.182705] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff] [ 0.182833] pci 0000:00:1f.2: PME# supported from D3hot [ 0.182977] pci 0000:00:1f.2: PME# disabled [ 0.183126] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.183388] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff] [ 0.183563] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f] [ 0.183819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.183977] pci 0000:02:00.0: PME# disabled [ 0.184201] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.184295] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff] [ 0.184575] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff] [ 0.184946] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.185025] pci 0000:03:00.0: PME# disabled [ 0.185254] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff] [ 0.185348] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.185446] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff] [ 0.185596] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff] [ 0.185690] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.185789] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff] [ 0.186016] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff] [ 0.186109] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff] [ 0.186206] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff] [ 0.186352] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff] [ 0.186471] pci 0000:15:00.0: supports D1 D2 [ 0.186558] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186653] pci 0000:15:00.0: PME# disabled [ 0.186808] pci 0000:00:1e.0: transparent bridge [ 0.186898] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff] [ 0.186980] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff] [ 0.187845] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.188012] pci_bus 0000:00: on NUMA node 0 [ 0.188103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.188345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.188515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.188683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.188857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.189037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.194071] initcall acpi_pci_root_init+0x0/0x25 returned 0 after 16599 usecs [ 0.194071] calling acpi_pci_link_init+0x0/0x3f @ 1 [ 0.194320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.195402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.197608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.198349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.199103] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.199834] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.200436] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 5858 usecs [ 0.200436] calling pnp_init+0x0/0xf @ 1 [ 0.200436] initcall pnp_init+0x0/0xf returned 0 after 0 usecs [ 0.200436] calling misc_init+0x0/0x92 @ 1 [ 0.200436] initcall misc_init+0x0/0x92 returned 0 after 0 usecs [ 0.200979] calling cn_init+0x0/0xcb @ 1 [ 0.201078] initcall cn_init+0x0/0xcb returned 0 after 0 usecs [ 0.201170] calling init_scsi+0x0/0x84 @ 1 [ 0.201338] SCSI subsystem initialized [ 0.201338] initcall init_scsi+0x0/0x84 returned 0 after 0 usecs [ 0.201338] calling ata_init+0x0/0x29d @ 1 [ 0.201338] libata version 3.00 loaded. [ 0.201338] initcall ata_init+0x0/0x29d returned 0 after 0 usecs [ 0.201975] calling phy_init+0x0/0x29 @ 1 [ 0.202074] initcall phy_init+0x0/0x29 returned 0 after 0 usecs [ 0.202074] calling init_pcmcia_cs+0x0/0x1e @ 1 [ 0.202163] initcall init_pcmcia_cs+0x0/0x1e returned 0 after 0 usecs [ 0.202163] calling usb_init+0x0/0x177 @ 1 [ 0.202177] usbcore: registered new interface driver usbfs [ 0.202177] usbcore: registered new interface driver hub [ 0.203006] usbcore: registered new device driver usb [ 0.203063] initcall usb_init+0x0/0x177 returned 0 after 976 usecs [ 0.203155] calling serio_init+0x0/0x82 @ 1 [ 0.203252] initcall serio_init+0x0/0x82 returned 0 after 0 usecs [ 0.203252] calling input_init+0x0/0xfb @ 1 [ 0.203252] initcall input_init+0x0/0xfb returned 0 after 0 usecs [ 0.203252] calling rtc_init+0x0/0x5e @ 1 [ 0.203252] initcall rtc_init+0x0/0x5e returned 0 after 0 usecs [ 0.203973] calling power_supply_class_init+0x0/0x2b @ 1 [ 0.204074] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs [ 0.204101] calling hwmon_init+0x0/0xe9 @ 1 [ 0.204202] initcall hwmon_init+0x0/0xe9 returned 0 after 0 usecs [ 0.204202] calling thermal_init+0x0/0x32 @ 1 [ 0.204202] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs [ 0.204202] calling md_init+0x0/0xb5 @ 1 [ 0.204202] initcall md_init+0x0/0xb5 returned 0 after 0 usecs [ 0.204252] calling leds_init+0x0/0x32 @ 1 [ 0.204983] initcall leds_init+0x0/0x32 returned 0 after 0 usecs [ 0.205065] calling pci_subsys_init+0x0/0xdf @ 1 [ 0.205153] PCI: Using ACPI for IRQ routing [ 0.205553] initcall pci_subsys_init+0x0/0xdf returned 0 after 0 usecs [ 0.205646] calling proto_init+0x0/0xf @ 1 [ 0.205736] initcall proto_init+0x0/0xf returned 0 after 0 usecs [ 0.205827] calling net_dev_init+0x0/0x142 @ 1 [ 0.206028] initcall net_dev_init+0x0/0x142 returned 0 after 0 usecs [ 0.206075] calling neigh_init+0x0/0x66 @ 1 [ 0.206164] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs [ 0.206256] calling fib_rules_init+0x0/0x99 @ 1 [ 0.206346] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs [ 0.206439] calling pktsched_init+0x0/0xa9 @ 1 [ 0.206530] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs [ 0.206622] calling tc_filter_init+0x0/0x43 @ 1 [ 0.206712] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs [ 0.206804] calling tc_action_init+0x0/0x43 @ 1 [ 0.206972] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs [ 0.207065] calling genl_init+0x0/0xb0 @ 1 [ 0.208976] initcall genl_init+0x0/0xb0 returned 0 after 1952 usecs [ 0.209068] calling cipso_v4_init+0x0/0x52 @ 1 [ 0.209159] initcall cipso_v4_init+0x0/0x52 returned 0 after 0 usecs [ 0.209250] calling wireless_nlevent_init+0x0/0x2f @ 1 [ 0.209341] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs [ 0.209436] calling cfg80211_init+0x0/0x64 @ 1 [ 0.219994] cfg80211: Using static regulatory domain info [ 0.220082] cfg80211: Regulatory domain: US [ 0.220169] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.220298] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.220391] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.220485] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.220577] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.220669] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.220762] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.220858] cfg80211: Calling CRDA for country: US [ 0.220985] initcall cfg80211_init+0x0/0x64 returned 0 after 11716 usecs [ 0.221068] calling ieee80211_init+0x0/0xa @ 1 [ 0.221158] initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs [ 0.221250] calling netlbl_init+0x0/0x6d @ 1 [ 0.221336] NetLabel: Initializing [ 0.221421] NetLabel: domain hash size = 128 [ 0.221508] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.221610] NetLabel: unlabeled traffic allowed by default [ 0.221702] initcall netlbl_init+0x0/0x6d returned 0 after 0 usecs [ 0.221793] calling rfkill_init+0x0/0x75 @ 1 [ 0.222006] initcall rfkill_init+0x0/0x75 returned 0 after 976 usecs [ 0.222087] calling sysctl_init+0x0/0x3b @ 1 [ 0.222175] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs [ 0.222267] calling pci_iommu_init+0x0/0xc @ 1 [ 0.222356] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs [ 0.222449] calling print_all_ICs+0x0/0x441 @ 1 [ 0.222538] [ 0.222539] printing PIC contents [ 0.222707] ... PIC IMR: ffff [ 0.222795] ... PIC IRR: 0800 [ 0.222888] ... PIC ISR: 0000 [ 0.222972] ... PIC ELCR: 0800 [ 0.223058] printing local APIC contents on CPU#0/0: [ 0.223146] ... APIC ID: 00000000 (0) [ 0.223233] ... APIC VERSION: 00050014 [ 0.223318] ... APIC TASKPRI: 00000000 (00) [ 0.223406] ... APIC PROCPRI: 00000000 [ 0.223491] ... APIC LDR: 01000000 [ 0.223576] ... APIC DFR: ffffffff [ 0.223661] ... APIC SPIV: 000001ff [ 0.223747] ... APIC ISR field: [ 0.223832] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.223965] ... APIC TMR field: [ 0.223965] 0000000002000000000000000000000000000000000000000000000000000000 [ 0.223965] ... APIC IRR field: [ 0.223965] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.223965] ... APIC ESR: 00000000 [ 0.223965] ... APIC ICR: 000008fb [ 0.223965] ... APIC ICR2: 02000000 [ 0.223965] ... APIC LVTT: 000200ef [ 0.223965] ... APIC LVTPC: 00010000 [ 0.223965] ... APIC LVT0: 00010700 [ 0.223965] ... APIC LVT1: 00000400 [ 0.223965] ... APIC LVTERR: 000000fe [ 0.223965] ... APIC TMICT: 00002896 [ 0.223965] ... APIC TMCCT: 000021a7 [ 0.223965] ... APIC TDCR: 00000003 [ 0.223965] [ 0.223577] printing local APIC contents on CPU#1/1: [ 0.223668] ... APIC ID: 01000000 (1) [ 0.223754] ... APIC VERSION: 00050014 [ 0.223840] ... APIC TASKPRI: 00000000 (00) [ 0.223928] ... APIC PROCPRI: 00000000 [ 0.223965] ... APIC LDR: 02000000 [ 0.223965] ... APIC DFR: ffffffff [ 0.223965] ... APIC SPIV: 000001ff [ 0.223965] ... APIC ISR field: [ 0.223965] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.223965] ... APIC TMR field: [ 0.223965] 0000000000000000000000000000000000000000000000000000000000000000 [ 0.223965] ... APIC IRR field: [ 0.223965] 0000000000000000000000000000000000000000000000000000000000008000 [ 0.223965] ... APIC ESR: 00000000 [ 0.223965] ... APIC ICR: 000008fd [ 0.223965] ... APIC ICR2: 01000000 [ 0.223965] ... APIC LVTT: 000200ef [ 0.223965] ... APIC LVTPC: 00010000 [ 0.223965] ... APIC LVT0: 00010700 [ 0.223965] ... APIC LVT1: 00010400 [ 0.223965] ... APIC LVTERR: 000000fe [ 0.223965] ... APIC TMICT: 00002896 [ 0.223965] ... APIC TMCCT: 00000f04 [ 0.223965] ... APIC TDCR: 00000003 [ 0.223965] [ 0.227664] number of MP IRQ sources: 15. [ 0.227752] number of IO-APIC #1 registers: 24. [ 0.227839] testing the IO APIC....................... [ 0.227933] [ 0.227967] IO APIC #1...... [ 0.228050] .... register #00: 02000000 [ 0.228136] ....... : physical APIC id: 02 [ 0.228223] ....... : Delivery Type: 0 [ 0.228309] ....... : LTS : 0 [ 0.228396] .... register #01: 00170020 [ 0.228482] ....... : max redirection entries: 0017 [ 0.228570] ....... : PRQ implemented: 0 [ 0.228656] ....... : IO APIC version: 0020 [ 0.228743] .... IRQ redirection table: [ 0.228966] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 0.229059] 00 000 1 0 0 0 0 0 0 00 [ 0.229195] 01 003 0 0 0 0 0 1 1 31 [ 0.229970] 02 003 0 0 0 0 0 1 1 30 [ 0.230105] 03 003 0 0 0 0 0 1 1 33 [ 0.230241] 04 003 0 0 0 0 0 1 1 34 [ 0.230377] 05 003 0 0 0 0 0 1 1 35 [ 0.230514] 06 003 0 0 0 0 0 1 1 36 [ 0.230650] 07 003 0 0 0 0 0 1 1 37 [ 0.230787] 08 003 0 0 0 0 0 1 1 38 [ 0.230967] 09 003 0 1 0 0 0 1 1 39 [ 0.231103] 0a 003 0 0 0 0 0 1 1 3A [ 0.231239] 0b 003 0 0 0 0 0 1 1 3B [ 0.231375] 0c 003 0 0 0 0 0 1 1 3C [ 0.231511] 0d 003 0 0 0 0 0 1 1 3D [ 0.231646] 0e 003 0 0 0 0 0 1 1 3E [ 0.231782] 0f 003 0 0 0 0 0 1 1 3F [ 0.231918] 10 000 1 0 0 0 0 0 0 00 [ 0.232055] 11 000 1 0 0 0 0 0 0 00 [ 0.232192] 12 000 1 0 0 0 0 0 0 00 [ 0.232329] 13 000 1 0 0 0 0 0 0 00 [ 0.232465] 14 000 1 0 0 0 0 0 0 00 [ 0.232602] 15 000 1 0 0 0 0 0 0 00 [ 0.232737] 16 000 1 0 0 0 0 0 0 00 [ 0.232873] 17 000 1 0 0 0 0 0 0 00 [ 0.232966] IRQ to pin mappings: [ 0.233051] IRQ0 -> 0:2 [ 0.233219] IRQ1 -> 0:1 [ 0.233389] IRQ3 -> 0:3 [ 0.233559] IRQ4 -> 0:4 [ 0.233729] IRQ5 -> 0:5 [ 0.233897] IRQ6 -> 0:6 [ 0.234088] IRQ7 -> 0:7 [ 0.234258] IRQ8 -> 0:8 [ 0.234426] IRQ9 -> 0:9 [ 0.234596] IRQ10 -> 0:10 [ 0.234765] IRQ11 -> 0:11 [ 0.234933] IRQ12 -> 0:12 [ 0.235087] IRQ13 -> 0:13 [ 0.235256] IRQ14 -> 0:14 [ 0.235426] IRQ15 -> 0:15 [ 0.235599] .................................... done. [ 0.235690] initcall print_all_ICs+0x0/0x441 returned 0 after 12693 usecs [ 0.235783] calling hpet_late_init+0x0/0x183 @ 1 [ 0.235877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.236179] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.238971] initcall hpet_late_init+0x0/0x183 returned 0 after 3905 usecs [ 0.239062] calling clocksource_done_booting+0x0/0x11 @ 1 [ 0.239968] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs [ 0.240097] calling rb_init_debugfs+0x0/0x27 @ 1 [ 0.240191] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs [ 0.240283] calling tracer_init_debugfs+0x0/0x26b @ 1 [ 0.240459] initcall tracer_init_debugfs+0x0/0x26b returned 0 after 0 usecs [ 0.240553] calling init_trace_printk_function_export+0x0/0x2a @ 1 [ 0.240647] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs [ 0.240776] calling event_trace_init+0x0/0x17e @ 1 [ 0.240979] Switched to high resolution mode on CPU 0 [ 0.241783] Switched to high resolution mode on CPU 1 [ 0.242167] initcall event_trace_init+0x0/0x17e returned 0 after 2148 usecs [ 0.242265] calling init_pipe_fs+0x0/0x41 @ 1 [ 0.242366] initcall init_pipe_fs+0x0/0x41 returned 0 after 11 usecs [ 0.242459] calling eventpoll_init+0x0/0xac @ 1 [ 0.242554] initcall eventpoll_init+0x0/0xac returned 0 after 5 usecs [ 0.242647] calling anon_inode_init+0x0/0xed @ 1 [ 0.242744] initcall anon_inode_init+0x0/0xed returned 0 after 6 usecs [ 0.242836] calling blk_scsi_ioctl_init+0x0/0x288 @ 1 [ 0.242929] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 1 usecs [ 0.243031] calling acpi_event_init+0x0/0x6f @ 1 [ 0.246021] initcall acpi_event_init+0x0/0x6f returned 0 after 2830 usecs [ 0.246114] calling pnpacpi_init+0x0/0x7b @ 1 [ 0.246202] pnp: PnP ACPI init [ 0.246298] ACPI: bus type pnp registered [ 0.248505] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.248733] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.248956] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.249185] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.250518] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.253081] pnp: PnP ACPI: found 11 devices [ 0.253168] ACPI: ACPI bus type pnp unregistered [ 0.253266] initcall pnpacpi_init+0x0/0x7b returned 0 after 6895 usecs [ 0.253359] calling pnp_system_init+0x0/0xf @ 1 [ 0.253456] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.253548] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.253641] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.253735] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.253828] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.253921] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.254025] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.254118] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.254211] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.254313] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.254406] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.254499] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.254592] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 0.254723] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.254859] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.254952] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.255050] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.255143] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.255235] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.255334] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.255428] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.255522] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.255616] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.255710] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.255804] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.255954] initcall pnp_system_init+0x0/0xf returned 0 after 2446 usecs [ 0.256056] calling chr_dev_init+0x0/0x8d @ 1 [ 0.256797] initcall chr_dev_init+0x0/0x8d returned 0 after 636 usecs [ 0.256891] calling firmware_class_init+0x0/0x61 @ 1 [ 0.257046] initcall firmware_class_init+0x0/0x61 returned 0 after 62 usecs [ 0.257140] calling init_pcmcia_bus+0x0/0x62 @ 1 [ 0.257308] initcall init_pcmcia_bus+0x0/0x62 returned 0 after 75 usecs [ 0.257402] calling cpufreq_gov_performance_init+0x0/0xf @ 1 [ 0.257497] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 1 usecs [ 0.257625] calling cpufreq_gov_userspace_init+0x0/0xf @ 1 [ 0.257719] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs [ 0.257849] calling init_acpi_pm_clocksource+0x0/0x1b5 @ 1 [ 0.292492] initcall init_acpi_pm_clocksource+0x0/0x1b5 returned 0 after 33741 usecs [ 0.292622] calling pcibios_assign_resources+0x0/0x66 @ 1 [ 0.292785] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.292876] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.292970] pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff [ 0.293076] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.293169] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.293267] pci 0000:00:1c.1: IO window: 0x3000-0x4fff [ 0.293360] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff [ 0.293453] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff [ 0.293588] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.293679] pci 0000:00:1c.2: IO window: 0x5000-0x6fff [ 0.293773] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff [ 0.293866] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff [ 0.294009] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c [ 0.294100] pci 0000:00:1c.3: IO window: 0x7000-0x8fff [ 0.294194] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff [ 0.294293] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff [ 0.294431] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.294524] pci 0000:15:00.0: IO window: 0x009000-0x0090ff [ 0.294618] pci 0000:15:00.0: IO window: 0x009400-0x0094ff [ 0.294712] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff [ 0.294807] pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff [ 0.294902] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.294994] pci 0000:00:1e.0: IO window: 0x9000-0xcfff [ 0.295094] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff [ 0.295188] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff [ 0.295338] alloc irq_desc for 20 on node -1 [ 0.295425] alloc kstat_irqs on node -1 [ 0.295514] IOAPIC[0]: Set routing entry (1-20 -> 0x49 -> IRQ 20 Mode:1 Active:1) [ 0.295645] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.295741] pci 0000:00:1c.0: setting latency timer to 64 [ 0.295836] alloc irq_desc for 21 on node -1 [ 0.295923] alloc kstat_irqs on node -1 [ 0.296019] IOAPIC[0]: Set routing entry (1-21 -> 0x51 -> IRQ 21 Mode:1 Active:1) [ 0.296149] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.296243] pci 0000:00:1c.1: setting latency timer to 64 [ 0.296347] alloc irq_desc for 22 on node -1 [ 0.296435] alloc kstat_irqs on node -1 [ 0.296522] IOAPIC[0]: Set routing entry (1-22 -> 0x59 -> IRQ 22 Mode:1 Active:1) [ 0.296651] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.296747] pci 0000:00:1c.2: setting latency timer to 64 [ 0.296843] alloc irq_desc for 23 on node -1 [ 0.297013] alloc kstat_irqs on node -1 [ 0.297803] IOAPIC[0]: Set routing entry (1-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) [ 0.297933] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.298033] pci 0000:00:1c.3: setting latency timer to 64 [ 0.298126] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.298219] pci 0000:00:1e.0: setting latency timer to 64 [ 0.298326] alloc irq_desc for 16 on node -1 [ 0.298413] alloc kstat_irqs on node -1 [ 0.298501] IOAPIC[0]: Set routing entry (1-16 -> 0x69 -> IRQ 16 Mode:1 Active:1) [ 0.298631] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.298729] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.298819] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.298910] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.299000] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff] [ 0.299099] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff] [ 0.299189] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff] [ 0.299287] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff] [ 0.299380] pci_bus 0000:04: resource 0 io: [0x5000-0x6fff] [ 0.299471] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.299563] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff] [ 0.299655] pci_bus 0000:0c: resource 0 io: [0x7000-0x8fff] [ 0.299745] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff] [ 0.299837] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff] [ 0.299929] pci_bus 0000:15: resource 0 io: [0x9000-0xcfff] [ 0.300026] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff] [ 0.300117] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff] [ 0.300210] pci_bus 0000:15: resource 3 io: [0x00-0xffff] [ 0.300309] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff] [ 0.300400] pci_bus 0000:16: resource 0 io: [0x9000-0x90ff] [ 0.300491] pci_bus 0000:16: resource 1 io: [0x9400-0x94ff] [ 0.300581] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff] [ 0.300673] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff] [ 0.300767] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 7864 usecs [ 0.300897] calling sysctl_core_init+0x0/0x2d @ 1 [ 0.301023] initcall sysctl_core_init+0x0/0x2d returned 0 after 33 usecs [ 0.301115] calling inet_init+0x0/0x1c3 @ 1 [ 0.301213] NET: Registered protocol family 2 [ 0.301404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.301831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.302659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.303110] TCP: Hash tables configured (established 131072 bind 65536) [ 0.303202] TCP reno registered [ 0.303404] initcall inet_init+0x0/0x1c3 returned 0 after 2142 usecs [ 0.303499] calling af_unix_init+0x0/0x47 @ 1 [ 0.303589] NET: Registered protocol family 1 [ 0.303688] initcall af_unix_init+0x0/0x47 returned 0 after 97 usecs [ 0.303781] calling populate_rootfs+0x0/0x1ea @ 1 [ 0.303938] initcall populate_rootfs+0x0/0x1ea returned 0 after 63 usecs [ 0.304045] calling i8259A_init_sysfs+0x0/0x1d @ 1 [ 0.304311] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 169 usecs [ 0.304404] calling sbf_init+0x0/0xc0 @ 1 [ 0.304495] Simple Boot Flag at 0x35 set to 0x1 [ 0.304589] initcall sbf_init+0x0/0xc0 returned 0 after 93 usecs [ 0.304681] calling i8237A_init_sysfs+0x0/0x1d @ 1 [ 0.304886] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 111 usecs [ 0.304980] calling add_rtc_cmos+0x0/0x7e @ 1 [ 0.305095] initcall add_rtc_cmos+0x0/0x7e returned 0 after 5 usecs [ 0.305188] calling cache_sysfs_init+0x0/0x4b @ 1 [ 0.305753] initcall cache_sysfs_init+0x0/0x4b returned 0 after 457 usecs [ 0.305847] calling mce_init_device+0x0/0xc1 @ 1 [ 0.306201] initcall mce_init_device+0x0/0xc1 returned 0 after 257 usecs [ 0.306305] calling threshold_init_device+0x0/0x3a @ 1 [ 0.306398] initcall threshold_init_device+0x0/0x3a returned 0 after 1 usecs [ 0.306492] calling thermal_throttle_init_device+0x0/0x77 @ 1 [ 0.306590] initcall thermal_throttle_init_device+0x0/0x77 returned 0 after 5 usecs [ 0.306720] calling msr_init+0x0/0xda @ 1 [ 0.307020] initcall msr_init+0x0/0xda returned 0 after 189 usecs [ 0.307111] calling cpuid_init+0x0/0xda @ 1 [ 0.307389] initcall cpuid_init+0x0/0xda returned 0 after 181 usecs [ 0.307482] calling ioapic_init_sysfs+0x0/0x84 @ 1 [ 0.307679] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 104 usecs [ 0.307772] calling add_pcspkr+0x0/0x24 @ 1 [ 0.307929] initcall add_pcspkr+0x0/0x24 returned 0 after 65 usecs [ 0.308034] calling microcode_init+0x0/0xf2 @ 1 [ 0.308192] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39 [ 0.308297] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39 [ 0.308450] Microcode Update Driver: v2.00 , Peter Oruba [ 0.308583] initcall microcode_init+0x0/0xf2 returned 0 after 447 usecs [ 0.308678] calling start_periodic_check_for_corruption+0x0/0x32 @ 1 [ 0.308770] Scanning for low memory corruption every 60 seconds [ 0.308864] initcall start_periodic_check_for_corruption+0x0/0x32 returned 0 after 91 usecs [ 0.308996] calling aes_init+0x0/0xf @ 1 [ 0.309202] initcall aes_init+0x0/0xf returned 0 after 90 usecs [ 0.309304] calling proc_schedstat_init+0x0/0x1c @ 1 [ 0.309401] initcall proc_schedstat_init+0x0/0x1c returned 0 after 6 usecs [ 0.309495] calling proc_execdomains_init+0x0/0x1c @ 1 [ 0.309588] initcall proc_execdomains_init+0x0/0x1c returned 0 after 2 usecs [ 0.309681] calling ioresources_init+0x0/0x2d @ 1 [ 0.309775] initcall ioresources_init+0x0/0x2d returned 0 after 3 usecs [ 0.309867] calling uid_cache_init+0x0/0x5b @ 1 [ 0.309963] initcall uid_cache_init+0x0/0x5b returned 0 after 5 usecs [ 0.310078] calling init_posix_timers+0x0/0xb3 @ 1 [ 0.310174] initcall init_posix_timers+0x0/0xb3 returned 0 after 5 usecs [ 0.310274] calling init_posix_cpu_timers+0x0/0xba @ 1 [ 0.310367] initcall init_posix_cpu_timers+0x0/0xba returned 0 after 1 usecs [ 0.310460] calling nsproxy_cache_init+0x0/0x27 @ 1 [ 0.310553] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 1 usecs [ 0.310647] calling create_proc_profile+0x0/0x16f @ 1 [ 0.310749] initcall create_proc_profile+0x0/0x16f returned 0 after 9 usecs [ 0.310843] calling timekeeping_init_device+0x0/0x1d @ 1 [ 0.311038] initcall timekeeping_init_device+0x0/0x1d returned 0 after 100 usecs [ 0.311170] calling init_clocksource_sysfs+0x0/0x43 @ 1 [ 0.311377] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 106 usecs [ 0.311508] calling init_timer_list_procfs+0x0/0x27 @ 1 [ 0.311602] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 2 usecs [ 0.311695] calling init_tstats_procfs+0x0/0x27 @ 1 [ 0.311789] initcall init_tstats_procfs+0x0/0x27 returned 0 after 2 usecs [ 0.311881] calling futex_init+0x0/0x65 @ 1 [ 0.311979] initcall futex_init+0x0/0x65 returned 0 after 8 usecs [ 0.312086] calling proc_dma_init+0x0/0x1c @ 1 [ 0.312179] initcall proc_dma_init+0x0/0x1c returned 0 after 2 usecs [ 0.312277] calling proc_modules_init+0x0/0x1c @ 1 [ 0.312370] initcall proc_modules_init+0x0/0x1c returned 0 after 2 usecs [ 0.312462] calling kallsyms_init+0x0/0x1f @ 1 [ 0.312553] initcall kallsyms_init+0x0/0x1f returned 0 after 2 usecs [ 0.312646] calling snapshot_device_init+0x0/0xf @ 1 [ 0.312801] initcall snapshot_device_init+0x0/0xf returned 0 after 61 usecs [ 0.312895] calling crash_save_vmcoreinfo_init+0x0/0x348 @ 1 [ 0.313023] initcall crash_save_vmcoreinfo_init+0x0/0x348 returned 0 after 34 usecs [ 0.313153] calling crash_notes_memory_init+0x0/0x31 @ 1 [ 0.313247] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 3 usecs [ 0.313384] calling pid_namespaces_init+0x0/0x27 @ 1 [ 0.313477] initcall pid_namespaces_init+0x0/0x27 returned 0 after 2 usecs [ 0.313570] calling audit_init+0x0/0xd2 @ 1 [ 0.313657] audit: initializing netlink socket (disabled) [ 0.313756] type=2000 audit(1249815910.313:1): initialized [ 0.313848] initcall audit_init+0x0/0xd2 returned 0 after 186 usecs [ 0.313941] calling audit_tree_init+0x0/0x3b @ 1 [ 0.314048] initcall audit_tree_init+0x0/0x3b returned 0 after 3 usecs [ 0.314140] calling init_kprobes+0x0/0x11c @ 1 [ 0.324102] initcall init_kprobes+0x0/0x11c returned 0 after 9640 usecs [ 0.324195] calling utsname_sysctl_init+0x0/0x11 @ 1 [ 0.324314] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 22 usecs [ 0.324409] calling init_markers+0x0/0xf @ 1 [ 0.324499] initcall init_markers+0x0/0xf returned 0 after 1 usecs [ 0.324591] calling init_tracepoints+0x0/0xf @ 1 [ 0.324683] initcall init_tracepoints+0x0/0xf returned 0 after 1 usecs [ 0.324774] calling init_events+0x0/0x5a @ 1 [ 0.324867] initcall init_events+0x0/0x5a returned 0 after 2 usecs [ 0.324958] calling init_sched_switch_trace+0x0/0xf @ 1 [ 0.325059] initcall init_sched_switch_trace+0x0/0xf returned 0 after 2 usecs [ 0.325152] calling init_blk_tracer+0x0/0x4b @ 1 [ 0.325243] initcall init_blk_tracer+0x0/0x4b returned 0 after 1 usecs [ 0.325343] calling perf_counter_sysfs_init+0x0/0x14 @ 1 [ 0.325439] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 4 usecs [ 0.325569] calling init_per_zone_wmark_min+0x0/0x59 @ 1 [ 0.325746] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 83 usecs [ 0.325877] calling pdflush_init+0x0/0x20 @ 1 [ 0.326037] initcall pdflush_init+0x0/0x20 returned 0 after 68 usecs [ 0.326131] calling kswapd_init+0x0/0x1d @ 1 [ 0.326255] initcall kswapd_init+0x0/0x1d returned 0 after 33 usecs [ 0.326350] calling init_tmpfs+0x0/0xb9 @ 1 [ 0.326466] initcall init_tmpfs+0x0/0xb9 returned 0 after 26 usecs [ 0.326558] calling setup_vmstat+0x0/0x9a @ 1 [ 0.326658] initcall setup_vmstat+0x0/0x9a returned 0 after 9 usecs [ 0.326751] calling mm_sysfs_init+0x0/0x22 @ 1 [ 0.326844] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs [ 0.326936] calling proc_vmalloc_init+0x0/0x1f @ 1 [ 0.327037] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 2 usecs [ 0.327131] calling init_emergency_pool+0x0/0x57 @ 1 [ 0.327243] highmem bounce pool size: 64 pages [ 0.327340] initcall init_emergency_pool+0x0/0x57 returned 0 after 115 usecs [ 0.327433] calling procswaps_init+0x0/0x1c @ 1 [ 0.327527] initcall procswaps_init+0x0/0x1c returned 0 after 2 usecs [ 0.327619] calling hugetlb_init+0x0/0x230 @ 1 [ 0.327709] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.327811] initcall hugetlb_init+0x0/0x230 returned 0 after 99 usecs [ 0.328692] calling slab_proc_init+0x0/0x1f @ 1 [ 0.328784] initcall slab_proc_init+0x0/0x1f returned 0 after 2 usecs [ 0.328876] calling slab_sysfs_init+0x0/0xb7 @ 1 [ 0.333074] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 4008 usecs [ 0.333169] calling fasync_init+0x0/0x24 @ 1 [ 0.333268] initcall fasync_init+0x0/0x24 returned 0 after 6 usecs [ 0.333360] calling proc_filesystems_init+0x0/0x1c @ 1 [ 0.333455] initcall proc_filesystems_init+0x0/0x1c returned 0 after 3 usecs [ 0.333548] calling dnotify_init+0x0/0x6f @ 1 [ 0.333649] initcall dnotify_init+0x0/0x6f returned 0 after 10 usecs [ 0.333741] calling inotify_setup+0x0/0x11 @ 1 [ 0.333833] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs [ 0.333925] calling inotify_user_setup+0x0/0x9e @ 1 [ 0.334044] initcall inotify_user_setup+0x0/0x9e returned 0 after 20 usecs [ 0.334138] calling aio_setup+0x0/0x60 @ 1 [ 0.334295] initcall aio_setup+0x0/0x60 returned 0 after 65 usecs [ 0.334389] calling proc_locks_init+0x0/0x1c @ 1 [ 0.334483] initcall proc_locks_init+0x0/0x1c returned 0 after 2 usecs [ 0.334575] calling init_mbcache+0x0/0x11 @ 1 [ 0.334665] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs [ 0.334757] calling dquot_init+0x0/0xdd @ 1 [ 0.334845] VFS: Disk quotas dquot_6.5.2 [ 0.335056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.335156] initcall dquot_init+0x0/0xdd returned 0 after 301 usecs [ 0.335249] calling init_v2_quota_format+0x0/0xf @ 1 [ 0.335349] initcall init_v2_quota_format+0x0/0xf returned 0 after 1 usecs [ 0.335442] calling proc_cmdline_init+0x0/0x1c @ 1 [ 0.335535] initcall proc_cmdline_init+0x0/0x1c returned 0 after 2 usecs [ 0.335629] calling proc_cpuinfo_init+0x0/0x1c @ 1 [ 0.335723] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 2 usecs [ 0.335815] calling proc_devices_init+0x0/0x1c @ 1 [ 0.335909] initcall proc_devices_init+0x0/0x1c returned 0 after 2 usecs [ 0.336010] calling proc_interrupts_init+0x0/0x1c @ 1 [ 0.336103] initcall proc_interrupts_init+0x0/0x1c returned 0 after 2 usecs [ 0.336197] calling proc_loadavg_init+0x0/0x1c @ 1 [ 0.336297] initcall proc_loadavg_init+0x0/0x1c returned 0 after 2 usecs [ 0.336390] calling proc_meminfo_init+0x0/0x1c @ 1 [ 0.336483] initcall proc_meminfo_init+0x0/0x1c returned 0 after 2 usecs [ 0.336576] calling proc_stat_init+0x0/0x1c @ 1 [ 0.336668] initcall proc_stat_init+0x0/0x1c returned 0 after 2 usecs [ 0.336759] calling proc_uptime_init+0x0/0x1c @ 1 [ 0.336851] initcall proc_uptime_init+0x0/0x1c returned 0 after 2 usecs [ 0.336943] calling proc_version_init+0x0/0x1c @ 1 [ 0.337060] initcall proc_version_init+0x0/0x1c returned 0 after 2 usecs [ 0.337152] calling proc_softirqs_init+0x0/0x1c @ 1 [ 0.337245] initcall proc_softirqs_init+0x0/0x1c returned 0 after 2 usecs [ 0.337347] calling proc_kcore_init+0x0/0x40 @ 1 [ 0.337439] initcall proc_kcore_init+0x0/0x40 returned 0 after 2 usecs [ 0.337532] calling vmcore_init+0x0/0xa0b @ 1 [ 0.337624] initcall vmcore_init+0x0/0xa0b returned 0 after 2 usecs [ 0.337716] calling proc_kmsg_init+0x0/0x1f @ 1 [ 0.337808] initcall proc_kmsg_init+0x0/0x1f returned 0 after 2 usecs [ 0.337901] calling proc_page_init+0x0/0x33 @ 1 [ 0.337995] initcall proc_page_init+0x0/0x33 returned 0 after 3 usecs [ 0.338093] calling init_devpts_fs+0x0/0x41 @ 1 [ 0.338196] initcall init_devpts_fs+0x0/0x41 returned 0 after 12 usecs [ 0.338296] calling init_ext3_fs+0x0/0x5f @ 1 [ 0.338545] initcall init_ext3_fs+0x0/0x5f returned 0 after 154 usecs [ 0.338636] calling journal_init+0x0/0x85 @ 1 [ 0.338965] initcall journal_init+0x0/0x85 returned 0 after 232 usecs [ 0.339070] calling init_ramfs_fs+0x0/0xf @ 1 [ 0.339161] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs [ 0.339254] calling init_hugetlbfs_fs+0x0/0x84 @ 1 [ 0.339441] initcall init_hugetlbfs_fs+0x0/0x84 returned 0 after 88 usecs [ 0.339535] calling init_fat_fs+0x0/0x46 @ 1 [ 0.339774] initcall init_fat_fs+0x0/0x46 returned 0 after 145 usecs [ 0.339866] calling init_vfat_fs+0x0/0xf @ 1 [ 0.339957] initcall init_vfat_fs+0x0/0xf returned 0 after 2 usecs [ 0.340057] calling init_msdos_fs+0x0/0xf @ 1 [ 0.340148] initcall init_msdos_fs+0x0/0xf returned 0 after 2 usecs [ 0.340240] calling init_iso9660_fs+0x0/0x61 @ 1 [ 0.340422] initcall init_iso9660_fs+0x0/0x61 returned 0 after 81 usecs [ 0.340515] calling init_nfs_fs+0x0/0xf9 @ 1 [ 0.340839] initcall init_nfs_fs+0x0/0xf9 returned 0 after 228 usecs [ 0.340931] calling init_nlm+0x0/0x1c @ 1 [ 0.341054] initcall init_nlm+0x0/0x1c returned 0 after 20 usecs [ 0.341146] calling init_nls_cp437+0x0/0xf @ 1 [ 0.341238] initcall init_nls_cp437+0x0/0xf returned 0 after 2 usecs [ 0.341339] calling init_nls_ascii+0x0/0xf @ 1 [ 0.341430] initcall init_nls_ascii+0x0/0xf returned 0 after 1 usecs [ 0.341523] calling init_nls_iso8859_1+0x0/0xf @ 1 [ 0.341615] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 1 usecs [ 0.341707] calling init_nls_utf8+0x0/0x1f @ 1 [ 0.341798] initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs [ 0.341891] calling init_autofs4_fs+0x0/0x1e @ 1 [ 0.342055] initcall init_autofs4_fs+0x0/0x1e returned 0 after 71 usecs [ 0.342148] calling ipc_init+0x0/0x20 @ 1 [ 0.342239] msgmni has been set to 1725 [ 0.342337] initcall ipc_init+0x0/0x20 returned 0 after 98 usecs [ 0.342430] calling ipc_sysctl_init+0x0/0x11 @ 1 [ 0.342553] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 32 usecs [ 0.342647] calling init_mqueue_fs+0x0/0x9e @ 1 [ 0.342845] initcall init_mqueue_fs+0x0/0x9e returned 0 after 104 usecs [ 0.342938] calling key_proc_init+0x0/0x48 @ 1 [ 0.343041] initcall key_proc_init+0x0/0x48 returned 0 after 4 usecs [ 0.343134] calling selinux_nf_ip_init+0x0/0x54 @ 1 [ 0.343222] SELinux: Registering netfilter hooks [ 0.343321] initcall selinux_nf_ip_init+0x0/0x54 returned 0 after 94 usecs [ 0.343414] calling init_sel_fs+0x0/0x5a @ 1 [ 0.343585] initcall init_sel_fs+0x0/0x5a returned 0 after 76 usecs [ 0.343677] calling selnl_init+0x0/0x46 @ 1 [ 0.343773] initcall selnl_init+0x0/0x46 returned 0 after 6 usecs [ 0.343864] calling sel_netif_init+0x0/0x57 @ 1 [ 0.343957] initcall sel_netif_init+0x0/0x57 returned 0 after 3 usecs [ 0.344056] calling sel_netnode_init+0x0/0x68 @ 1 [ 0.344149] initcall sel_netnode_init+0x0/0x68 returned 0 after 2 usecs [ 0.344241] calling sel_netport_init+0x0/0x68 @ 1 [ 0.344340] initcall sel_netport_init+0x0/0x68 returned 0 after 2 usecs [ 0.344433] calling aurule_init+0x0/0x30 @ 1 [ 0.344523] initcall aurule_init+0x0/0x30 returned 0 after 1 usecs [ 0.344615] calling crypto_wq_init+0x0/0x29 @ 1 [ 0.344761] initcall crypto_wq_init+0x0/0x29 returned 0 after 54 usecs [ 0.344854] calling crypto_algapi_init+0x0/0xc @ 1 [ 0.344947] initcall crypto_algapi_init+0x0/0xc returned 0 after 3 usecs [ 0.345048] calling chainiv_module_init+0x0/0xf @ 1 [ 0.345141] initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs [ 0.345234] calling eseqiv_module_init+0x0/0xf @ 1 [ 0.345333] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs [ 0.345425] calling hmac_module_init+0x0/0xf @ 1 [ 0.345517] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs [ 0.345609] calling md5_mod_init+0x0/0xf @ 1 [ 0.345762] initcall md5_mod_init+0x0/0xf returned 0 after 62 usecs [ 0.345855] calling sha1_generic_mod_init+0x0/0xf @ 1 [ 0.345998] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 50 usecs [ 0.346100] calling crypto_ecb_module_init+0x0/0xf @ 1 [ 0.346193] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs [ 0.346291] calling crypto_cbc_module_init+0x0/0xf @ 1 [ 0.346384] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs [ 0.346477] calling des_generic_mod_init+0x0/0x33 @ 1 [ 0.346690] initcall des_generic_mod_init+0x0/0x33 returned 0 after 119 usecs [ 0.346785] calling aes_init+0x0/0xf @ 1 [ 0.346945] initcall aes_init+0x0/0xf returned 0 after 69 usecs [ 0.347046] calling arc4_init+0x0/0xf @ 1 [ 0.347226] initcall arc4_init+0x0/0xf returned 0 after 88 usecs [ 0.347324] calling crypto_authenc_module_init+0x0/0xf @ 1 [ 0.347417] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs [ 0.347547] calling krng_mod_init+0x0/0xf @ 1 [ 0.347669] alg: No test for stdrng (krng) [ 0.347767] initcall krng_mod_init+0x0/0xf returned 0 after 126 usecs [ 0.347861] calling proc_genhd_init+0x0/0x2d @ 1 [ 0.347956] initcall proc_genhd_init+0x0/0x2d returned 0 after 4 usecs [ 0.348056] calling bsg_init+0x0/0x10d @ 1 [ 0.348296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.348427] initcall bsg_init+0x0/0x10d returned 0 after 275 usecs [ 0.348519] calling noop_init+0x0/0x11 @ 1 [ 0.348608] io scheduler noop registered [ 0.348696] initcall noop_init+0x0/0x11 returned 0 after 85 usecs [ 0.348786] calling as_init+0x0/0x11 @ 1 [ 0.348874] io scheduler anticipatory registered [ 0.348964] initcall as_init+0x0/0x11 returned 0 after 86 usecs [ 0.349062] calling deadline_init+0x0/0x11 @ 1 [ 0.349150] io scheduler deadline registered [ 0.349239] initcall deadline_init+0x0/0x11 returned 0 after 85 usecs [ 0.349338] calling cfq_init+0x0/0x91 @ 1 [ 0.349515] io scheduler cfq registered (default) [ 0.349605] initcall cfq_init+0x0/0x91 returned 0 after 173 usecs [ 0.349696] calling percpu_counter_startup+0x0/0x16 @ 1 [ 0.349789] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs [ 0.349882] calling audit_classes_init+0x0/0x4f @ 1 [ 0.349978] initcall audit_classes_init+0x0/0x4f returned 0 after 4 usecs [ 0.350079] calling pci_init+0x0/0x2c @ 1 [ 0.350177] pci 0000:00:02.0: Boot video device [ 0.350285] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.350377] pci 0000:00:1d.0: Performing full reset [ 0.350482] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.350573] pci 0000:00:1d.1: Performing full reset [ 0.350677] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.350769] pci 0000:00:1d.2: Performing full reset [ 0.350873] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.350964] pci 0000:00:1d.3: Performing full reset [ 0.351107] initcall pci_init+0x0/0x2c returned 0 after 917 usecs [ 0.351199] calling pci_proc_init+0x0/0x5b @ 1 [ 0.351347] initcall pci_proc_init+0x0/0x5b returned 0 after 49 usecs [ 0.351440] calling pcie_portdrv_init+0x0/0x41 @ 1 [ 0.351664] alloc irq_desc for 24 on node -1 [ 0.351752] alloc kstat_irqs on node -1 [ 0.351850] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.351950] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.353132] alloc irq_desc for 25 on node -1 [ 0.353220] alloc kstat_irqs on node -1 [ 0.353324] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.353421] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.353816] alloc irq_desc for 26 on node -1 [ 0.353904] alloc kstat_irqs on node -1 [ 0.353998] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.354105] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.354480] alloc irq_desc for 27 on node -1 [ 0.354567] alloc kstat_irqs on node -1 [ 0.354660] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.354759] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.355139] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 3523 usecs [ 0.355233] calling aer_service_init+0x0/0x1d @ 1 [ 0.355390] initcall aer_service_init+0x0/0x1d returned 0 after 57 usecs [ 0.355483] calling pci_hotplug_init+0x0/0x18 @ 1 [ 0.355573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.355665] initcall pci_hotplug_init+0x0/0x18 returned 0 after 88 usecs [ 0.355757] calling fb_console_init+0x0/0xf5 @ 1 [ 0.355912] initcall fb_console_init+0x0/0xf5 returned 0 after 63 usecs [ 0.356014] calling genericbl_init+0x0/0xf @ 1 [ 0.356161] initcall genericbl_init+0x0/0xf returned 0 after 55 usecs [ 0.356253] calling efifb_init+0x0/0x1b8 @ 1 [ 0.356357] initcall efifb_init+0x0/0x1b8 returned -19 after 9 usecs [ 0.356450] calling acpi_reserve_resources+0x0/0xc8 @ 1 [ 0.356544] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 3 usecs [ 0.356638] calling irqrouter_init_sysfs+0x0/0x33 @ 1 [ 0.356829] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 97 usecs [ 0.356923] calling acpi_ac_init+0x0/0x3d @ 1 [ 0.357536] ACPI: AC Adapter [AC] (on-line) [ 0.357690] initcall acpi_ac_init+0x0/0x3d returned 0 after 643 usecs [ 0.357785] calling acpi_button_init+0x0/0x4a @ 1 [ 0.357978] input: Power Button as /class/input/input0 [ 0.358075] ACPI: Power Button [PWRF] [ 0.358286] input: Lid Switch as /class/input/input1 [ 0.358958] ACPI: Lid Switch [LID] [ 0.359153] input: Sleep Button as /class/input/input2 [ 0.359245] ACPI: Sleep Button [SLPB] [ 0.359403] initcall acpi_button_init+0x0/0x4a returned 0 after 1490 usecs [ 0.359496] calling acpi_fan_init+0x0/0x4a @ 1 [ 0.359649] initcall acpi_fan_init+0x0/0x4a returned 0 after 61 usecs [ 0.359741] calling acpi_video_init+0x0/0x6b @ 1 [ 0.360402] input: Video Bus as /class/input/input3 [ 0.360492] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 0.360659] initcall acpi_video_init+0x0/0x6b returned 0 after 807 usecs [ 0.360753] calling acpi_processor_init+0x0/0xe9 @ 1 [ 0.361333] ACPI: SSDT 7f6e609e 001ED (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.362054] ACPI: SSDT 7f6e5de1 00238 (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.363535] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.363866] processor LNXCPU:00: registered as cooling_device0 [ 0.363960] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.364541] ACPI: SSDT 7f6e628b 00094 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.365193] ACPI: SSDT 7f6e6019 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.366681] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.367015] processor LNXCPU:01: registered as cooling_device1 [ 0.367108] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.367390] initcall acpi_processor_init+0x0/0xe9 returned 0 after 6391 usecs [ 0.367484] calling acpi_container_init+0x0/0x3d @ 1 [ 0.372921] initcall acpi_container_init+0x0/0x3d returned 0 after 5219 usecs [ 0.373026] calling acpi_thermal_init+0x0/0x6f @ 1 [ 0.376397] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.376493] ACPI: Thermal Zone [THM0] (55 C) [ 0.378159] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.378256] ACPI: Thermal Zone [THM1] (56 C) [ 0.378400] initcall acpi_thermal_init+0x0/0x6f returned 0 after 5157 usecs [ 0.378494] calling acpi_battery_init+0x0/0x13 @ 1 [ 0.420206] ACPI: Battery Slot [BAT0] (battery present) [ 0.420371] initcall acpi_battery_init+0x0/0x13 returned 0 after 40805 usecs [ 0.420467] calling rand_initialize+0x0/0x25 @ 1 [ 0.420582] initcall rand_initialize+0x0/0x25 returned 0 after 23 usecs [ 0.420675] calling tty_init+0x0/0xd5 @ 1 [ 0.425266] initcall tty_init+0x0/0xd5 returned 0 after 4393 usecs [ 0.425361] calling pty_init+0x0/0x20d @ 1 [ 0.425540] initcall pty_init+0x0/0x20d returned 0 after 86 usecs [ 0.425633] calling sysrq_init+0x0/0x1f @ 1 [ 0.425726] initcall sysrq_init+0x0/0x1f returned 0 after 4 usecs [ 0.425818] calling hpet_init+0x0/0x57 @ 1 [ 0.426111] initcall hpet_init+0x0/0x57 returned 0 after 197 usecs [ 0.426202] calling nvram_init+0x0/0x70 @ 1 [ 0.426358] Non-volatile memory driver v1.3 [ 0.426448] initcall nvram_init+0x0/0x70 returned 0 after 144 usecs [ 0.426540] calling mod_init+0x0/0x1ba @ 1 [ 0.426734] intel_rng: FWH not detected [ 0.426854] initcall mod_init+0x0/0x1ba returned -19 after 219 usecs [ 0.426948] calling mod_init+0x0/0x9f @ 1 [ 0.427073] initcall mod_init+0x0/0x9f returned -19 after 16 usecs [ 0.427165] calling mod_init+0x0/0x91 @ 1 [ 0.427270] initcall mod_init+0x0/0x91 returned -19 after 15 usecs [ 0.427362] calling mod_init+0x0/0x41 @ 1 [ 0.427451] initcall mod_init+0x0/0x41 returned -19 after 0 usecs [ 0.427543] calling agp_init+0x0/0x21 @ 1 [ 0.427631] Linux agpgart interface v0.103 [ 0.427720] initcall agp_init+0x0/0x21 returned 0 after 85 usecs [ 0.427811] calling agp_amd64_init+0x0/0xc0 @ 1 [ 0.427970] initcall agp_amd64_init+0x0/0xc0 returned -19 after 65 usecs [ 0.428083] calling agp_intel_init+0x0/0x24 @ 1 [ 0.428184] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.428933] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.432042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.432221] initcall agp_intel_init+0x0/0x24 returned 0 after 3948 usecs [ 0.432324] calling drm_core_init+0x0/0xea @ 1 [ 0.432486] [drm] Initialized drm 1.1.0 20060810 [ 0.432577] initcall drm_core_init+0x0/0xea returned 0 after 159 usecs [ 0.432669] calling i915_init+0x0/0x58 @ 1 [ 0.432856] pci 0000:00:02.0: power state changed by ACPI to D0 [ 0.432952] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.433066] pci 0000:00:02.0: setting latency timer to 64 [ 0.435959] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.436130] initcall i915_init+0x0/0x58 returned 0 after 3288 usecs [ 0.436223] calling cn_proc_init+0x0/0x30 @ 1 [ 0.436325] initcall cn_proc_init+0x0/0x30 returned 0 after 3 usecs [ 0.436416] calling serial8250_init+0x0/0x113 @ 1 [ 0.436506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.436900] async_waiting @ 1 [ 0.436986] async_continuing @ 1 after 1 usec [ 0.558108] async_waiting @ 1 [ 0.558195] async_continuing @ 1 after 1 usec [ 0.680159] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 0.680516] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.680720] initcall serial8250_init+0x0/0x113 returned 0 after 238488 usecs [ 0.680814] calling serial8250_pnp_init+0x0/0xf @ 1 [ 0.681118] initcall serial8250_pnp_init+0x0/0xf returned 0 after 208 usecs [ 0.681212] calling serial8250_pci_init+0x0/0x16 @ 1 [ 0.681414] initcall serial8250_pci_init+0x0/0x16 returned 0 after 99 usecs [ 0.681510] calling topology_sysfs_init+0x0/0x3f @ 1 [ 0.681615] initcall topology_sysfs_init+0x0/0x3f returned 0 after 14 usecs [ 0.681709] calling brd_init+0x0/0x14e @ 1 [ 0.684430] brd: module loaded [ 0.684519] initcall brd_init+0x0/0x14e returned 0 after 2657 usecs [ 0.684612] calling loop_init+0x0/0x166 @ 1 [ 0.685961] loop: module loaded [ 0.686059] initcall loop_init+0x0/0x166 returned 0 after 1325 usecs [ 0.686152] calling cpqarray_init+0x0/0x22b @ 1 [ 0.686240] Compaq SMART2 Driver (v 2.6.0) [ 0.686452] initcall cpqarray_init+0x0/0x22b returned -19 after 204 usecs [ 0.686546] calling mac_hid_init+0x0/0x75 @ 1 [ 0.686729] input: Macintosh mouse button emulation as /class/input/input4 [ 0.686851] initcall mac_hid_init+0x0/0x75 returned 0 after 209 usecs [ 0.686943] calling spi_transport_init+0x0/0x6c @ 1 [ 0.687171] initcall spi_transport_init+0x0/0x6c returned 0 after 101 usecs [ 0.687272] calling ahc_linux_init+0x0/0x5c @ 1 [ 0.687446] initcall ahc_linux_init+0x0/0x5c returned 0 after 81 usecs [ 0.687538] calling init_sd+0x0/0xb6 @ 1 [ 0.687733] initcall init_sd+0x0/0xb6 returned 0 after 103 usecs [ 0.687825] calling init_sr+0x0/0x3d @ 1 [ 0.687968] initcall init_sr+0x0/0x3d returned 0 after 52 usecs [ 0.688080] calling init_sg+0x0/0x133 @ 1 [ 0.688234] initcall init_sg+0x0/0x133 returned 0 after 62 usecs [ 0.688333] calling ahci_init+0x0/0x16 @ 1 [ 0.688446] ahci 0000:00:1f.2: version 3.0 [ 0.688549] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.688679] alloc irq_desc for 28 on node -1 [ 0.688767] alloc kstat_irqs on node -1 [ 0.688863] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 0.689024] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 0.689157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 0.689255] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.689459] scsi0 : ahci [ 0.689686] scsi1 : ahci [ 0.689879] scsi2 : ahci [ 0.690070] scsi3 : ahci [ 0.690291] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28 [ 0.690419] ata2: DUMMY [ 0.690502] ata3: DUMMY [ 0.690585] ata4: DUMMY [ 1.250038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.251600] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.251693] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.251785] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.253078] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100 [ 1.253170] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.254937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 1.255050] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.255932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.257229] ata1.00: configured for UDMA/100 [ 1.270677] ata1.00: configured for UDMA/100 [ 1.270768] ata1: EH complete [ 1.270855] async_waiting @ 1 [ 1.270941] async_continuing @ 1 after 1 usec [ 1.271148] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5 [ 1.271477] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.271659] sd 0:0:0:0: [sda] Write Protect is off [ 1.271748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.271864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.272142] sda: sda1 sda2 [ 1.659535] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.659772] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.659958] async_waiting @ 1 [ 1.660055] async_continuing @ 1 after 1 usec [ 1.660159] async_waiting @ 1 [ 1.660245] async_continuing @ 1 after 1 usec [ 1.660355] async_waiting @ 1 [ 1.660442] async_continuing @ 1 after 1 usec [ 1.660601] initcall ahci_init+0x0/0x16 returned 0 after 949390 usecs [ 1.660693] calling piix_init+0x0/0x27 @ 1 [ 1.660798] ata_piix 0000:00:1f.1: version 2.13 [ 1.660893] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 1.661028] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.661196] scsi4 : ata_piix [ 1.661393] scsi5 : ata_piix [ 1.662298] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.662391] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.816409] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33 [ 1.822317] ata5.00: configured for UDMA/33 [ 1.823055] async_waiting @ 1 [ 1.823142] async_continuing @ 1 after 1 usec [ 1.827280] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5 [ 1.838286] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.838379] Uniform CD-ROM driver Revision: 3.20 [ 1.838690] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.838933] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.839145] ata6: port disabled. ignoring. [ 1.839241] async_waiting @ 1 [ 1.839335] async_continuing @ 1 after 1 usec [ 1.839489] initcall piix_init+0x0/0x27 returned 0 after 174516 usecs [ 1.839582] calling nv_init+0x0/0x16 @ 1 [ 1.839737] initcall nv_init+0x0/0x16 returned 0 after 64 usecs [ 1.839829] calling amd_init+0x0/0x16 @ 1 [ 1.839979] initcall amd_init+0x0/0x16 returned 0 after 59 usecs [ 1.840080] calling mpiix_init+0x0/0x16 @ 1 [ 1.840230] initcall mpiix_init+0x0/0x16 returned 0 after 58 usecs [ 1.840327] calling oldpiix_init+0x0/0x16 @ 1 [ 1.840478] initcall oldpiix_init+0x0/0x16 returned 0 after 59 usecs [ 1.840570] calling sch_init+0x0/0x16 @ 1 [ 1.840719] initcall sch_init+0x0/0x16 returned 0 after 57 usecs [ 1.840810] calling ata_generic_init+0x0/0x16 @ 1 [ 1.840963] initcall ata_generic_init+0x0/0x16 returned 0 after 60 usecs [ 1.841065] calling e1000_init_module+0x0/0x6e @ 1 [ 1.841154] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.841246] Copyright (c) 1999-2006 Intel Corporation. [ 1.841412] initcall e1000_init_module+0x0/0x6e returned 0 after 251 usecs [ 1.841505] calling e1000_init_module+0x0/0x53 @ 1 [ 1.841594] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.841683] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.841874] e1000e 0000:02:00.0: Disabling L1 ASPM [ 1.842048] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.842149] e1000e 0000:02:00.0: setting latency timer to 64 [ 1.842419] alloc irq_desc for 29 on node -1 [ 1.842507] alloc kstat_irqs on node -1 [ 1.842609] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 1.883473] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM [ 1.925641] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2 [ 1.925771] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.925937] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 1.926107] initcall e1000_init_module+0x0/0x53 returned 0 after 82530 usecs [ 1.926200] calling vortex_init+0x0/0x9b @ 1 [ 1.926364] initcall vortex_init+0x0/0x9b returned 0 after 66 usecs [ 1.926457] calling ne2k_pci_init+0x0/0x16 @ 1 [ 1.926608] initcall ne2k_pci_init+0x0/0x16 returned 0 after 60 usecs [ 1.926701] calling e100_init_module+0x0/0x4d @ 1 [ 1.926790] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.926880] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.927046] initcall e100_init_module+0x0/0x4d returned 0 after 248 usecs [ 1.927138] calling tg3_init+0x0/0x16 @ 1 [ 1.927304] initcall tg3_init+0x0/0x16 returned 0 after 74 usecs [ 1.927396] calling bnx2_init+0x0/0x16 @ 1 [ 1.927547] initcall bnx2_init+0x0/0x16 returned 0 after 59 usecs [ 1.927639] calling sky2_init_module+0x0/0x20 @ 1 [ 1.927727] sky2 driver version 1.23 [ 1.927880] initcall sky2_init_module+0x0/0x20 returned 0 after 147 usecs [ 1.927973] calling net_olddevs_init+0x0/0x81 @ 1 [ 1.928076] initcall net_olddevs_init+0x0/0x81 returned 0 after 5 usecs [ 1.928169] calling init_nic+0x0/0x16 @ 1 [ 1.928328] initcall init_nic+0x0/0x16 returned 0 after 66 usecs [ 1.928420] calling rtl8139_init_module+0x0/0x16 @ 1 [ 1.928576] initcall rtl8139_init_module+0x0/0x16 returned 0 after 64 usecs [ 1.928670] calling rtl8169_init_module+0x0/0x16 @ 1 [ 1.928823] initcall rtl8169_init_module+0x0/0x16 returned 0 after 60 usecs [ 1.928917] calling init_ath5k_pci+0x0/0x2d @ 1 [ 1.929084] initcall init_ath5k_pci+0x0/0x2d returned 0 after 68 usecs [ 1.929176] calling init_netconsole+0x0/0x1a2 @ 1 [ 1.929275] netconsole: local port 4444 [ 1.929361] netconsole: local IP 10.0.1.15 [ 1.929448] netconsole: interface eth0 [ 1.929535] netconsole: remote port 4444 [ 1.929621] netconsole: remote IP 10.0.1.21 [ 1.929709] netconsole: remote ethernet address 00:30:48:c6:86:26 [ 1.929801] netconsole: device eth0 not up yet, forcing it [ 1.943283] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 1.994113] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 4.659020] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 4.817190] console [netcon0] enabled [ 4.817294] netconsole: network logging started [ 4.817394] initcall init_netconsole+0x0/0x1a2 returned 0 after 2820429 usecs [ 4.817497] calling cdrom_init+0x0/0xc @ 1 [ 4.817596] initcall cdrom_init+0x0/0xc returned 0 after 1 usecs [ 4.817697] calling nonstatic_sysfs_init+0x0/0xf @ 1 [ 4.817803] initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 5 usecs [ 4.817906] calling yenta_socket_init+0x0/0x16 @ 1 [ 4.818039] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012] [ 4.818164] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI [ 4.818312] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI [ 4.818417] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64 [ 4.919062] async_waiting @ 1 [ 4.919152] async_continuing @ 1 after 1 usec [ 5.041827] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 5.041922] yenta_cardbus 0000:15:00.0: Socket status: 30000007 [ 5.042032] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 5.042173] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 5.042326] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 5.293140] initcall yenta_socket_init+0x0/0x16 returned 0 after 463995 usecs [ 5.293235] calling mon_init+0x0/0xe2 @ 1 [ 5.293480] initcall mon_init+0x0/0xe2 returned 0 after 131 usecs [ 5.293574] calling ehci_hcd_init+0x0/0xbf @ 1 [ 5.293672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.293774] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 5.294375] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 5.294474] alloc irq_desc for 19 on node -1 [ 5.294564] alloc kstat_irqs on node -1 [ 5.294664] IOAPIC[0]: Set routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1) [ 5.294802] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.294912] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.295024] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.295145] drivers/usb/core/inode.c: creating file 'devices' [ 5.295247] drivers/usb/core/inode.c: creating file '001' [ 5.295428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.295566] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 5.295707] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 5.295867] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT [ 5.299905] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.300000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.300108] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 5.300219] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 [ 5.300328] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 5.304353] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 5.310015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.310158] usb usb1: default language 0x0409 [ 5.310254] usb usb1: udev 1, busnum 1, minor = 0 [ 5.310353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.310454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.310591] usb usb1: Product: EHCI Host Controller [ 5.310687] usb usb1: Manufacturer: Linux 2.6.31-rc5-tip ehci_hcd [ 5.310786] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.310930] usb usb1: uevent [ 5.311098] usb usb1: usb_probe_device [ 5.311187] usb usb1: configuration #1 chosen from 1 choice [ 5.311297] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.311412] usb 1-0:1.0: uevent [ 5.311563] hub 1-0:1.0: usb_probe_interface [ 5.311653] hub 1-0:1.0: usb_probe_interface - got id [ 5.311751] hub 1-0:1.0: USB hub found [ 5.311851] hub 1-0:1.0: 8 ports detected [ 5.311946] hub 1-0:1.0: standalone hub [ 5.312049] hub 1-0:1.0: no power switching (usb 1.0) [ 5.312145] hub 1-0:1.0: individual port over-current protection [ 5.312245] hub 1-0:1.0: power on to power good time: 20ms [ 5.312352] hub 1-0:1.0: local power source is good [ 5.312450] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 5.312599] drivers/usb/core/inode.c: creating file '001' [ 5.312771] initcall ehci_hcd_init+0x0/0xbf returned 0 after 18649 usecs [ 5.312865] calling ohci_hcd_mod_init+0x0/0x94 @ 1 [ 5.312963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.313070] ohci_hcd: block sizes: ed 64 td 64 [ 5.313243] initcall ohci_hcd_mod_init+0x0/0x94 returned 0 after 271 usecs [ 5.313344] calling uhci_hcd_init+0x0/0x10a @ 1 [ 5.313441] uhci_hcd: USB Universal Host Controller Interface driver [ 5.314123] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 5.314220] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.314334] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.314433] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.314535] drivers/usb/core/inode.c: creating file '002' [ 5.314718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.314853] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.314954] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.315062] uhci_hcd 0000:00:1d.0: Performing full reset [ 5.315182] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.315284] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 5.315433] usb usb2: default language 0x0409 [ 5.315529] usb usb2: udev 1, busnum 2, minor = 128 [ 5.315627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.315728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.315865] usb usb2: Product: UHCI Host Controller [ 5.315961] usb usb2: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd [ 5.316068] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.316207] usb usb2: uevent [ 5.316373] usb usb2: usb_probe_device [ 5.317244] usb usb2: configuration #1 chosen from 1 choice [ 5.317354] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.317470] usb 2-0:1.0: uevent [ 5.317619] hub 2-0:1.0: usb_probe_interface [ 5.317717] hub 2-0:1.0: usb_probe_interface - got id [ 5.317813] hub 2-0:1.0: USB hub found [ 5.317913] hub 2-0:1.0: 2 ports detected [ 5.318015] hub 2-0:1.0: standalone hub [ 5.318111] hub 2-0:1.0: no power switching (usb 1.0) [ 5.318208] hub 2-0:1.0: individual port over-current protection [ 5.318315] hub 2-0:1.0: power on to power good time: 2ms [ 5.318416] hub 2-0:1.0: local power source is good [ 5.318513] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 5.318631] drivers/usb/core/inode.c: creating file '001' [ 5.318767] alloc irq_desc for 17 on node -1 [ 5.318857] alloc kstat_irqs on node -1 [ 5.318956] IOAPIC[0]: Set routing entry (1-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1) [ 5.319103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.319208] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.319316] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.319417] drivers/usb/core/inode.c: creating file '003' [ 5.319593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.319729] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.319830] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.319930] uhci_hcd 0000:00:1d.1: Performing full reset [ 5.320048] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 5.320159] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 [ 5.320293] usb usb3: default language 0x0409 [ 5.320397] usb usb3: udev 1, busnum 3, minor = 256 [ 5.320494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.320595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.320731] usb usb3: Product: UHCI Host Controller [ 5.320828] usb usb3: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd [ 5.320927] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.321082] usb usb3: uevent [ 5.321232] usb usb3: usb_probe_device [ 5.321327] usb usb3: configuration #1 chosen from 1 choice [ 5.321430] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 5.321545] usb 3-0:1.0: uevent [ 5.321699] hub 3-0:1.0: usb_probe_interface [ 5.321787] hub 3-0:1.0: usb_probe_interface - got id [ 5.321883] hub 3-0:1.0: USB hub found [ 5.321985] hub 3-0:1.0: 2 ports detected [ 5.322087] hub 3-0:1.0: standalone hub [ 5.322182] hub 3-0:1.0: no power switching (usb 1.0) [ 5.322285] hub 3-0:1.0: individual port over-current protection [ 5.322385] hub 3-0:1.0: power on to power good time: 2ms [ 5.322485] hub 3-0:1.0: local power source is good [ 5.322582] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5.322702] drivers/usb/core/inode.c: creating file '001' [ 5.323510] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 5.323605] alloc irq_desc for 18 on node -1 [ 5.323693] alloc kstat_irqs on node -1 [ 5.323791] IOAPIC[0]: Set routing entry (1-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) [ 5.323929] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.324043] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.324143] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.324244] drivers/usb/core/inode.c: creating file '004' [ 5.324427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.324563] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.324663] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.324763] uhci_hcd 0000:00:1d.2: Performing full reset [ 5.324875] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 5.324985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 5.325132] usb usb4: default language 0x0409 [ 5.325227] usb usb4: udev 1, busnum 4, minor = 384 [ 5.325331] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.325432] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.325568] usb usb4: Product: UHCI Host Controller [ 5.325665] usb usb4: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd [ 5.325765] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.325905] usb usb4: uevent [ 5.326071] usb usb4: usb_probe_device [ 5.326160] usb usb4: configuration #1 chosen from 1 choice [ 5.326264] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 5.326382] usb 4-0:1.0: uevent [ 5.326533] hub 4-0:1.0: usb_probe_interface [ 5.326622] hub 4-0:1.0: usb_probe_interface - got id [ 5.326719] hub 4-0:1.0: USB hub found [ 5.326820] hub 4-0:1.0: 2 ports detected [ 5.326915] hub 4-0:1.0: standalone hub [ 5.327017] hub 4-0:1.0: no power switching (usb 1.0) [ 5.327114] hub 4-0:1.0: individual port over-current protection [ 5.327213] hub 4-0:1.0: power on to power good time: 2ms [ 5.327322] hub 4-0:1.0: local power source is good [ 5.327418] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5.327536] drivers/usb/core/inode.c: creating file '001' [ 5.327677] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.327774] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.327876] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.327977] drivers/usb/core/inode.c: creating file '005' [ 5.328167] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.328311] uhci_hcd 0000:00:1d.3: detected 2 ports [ 5.328411] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.328512] uhci_hcd 0000:00:1d.3: Performing full reset [ 5.328627] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 5.328768] usb usb5: default language 0x0409 [ 5.328863] usb usb5: udev 1, busnum 5, minor = 512 [ 5.328961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.329070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.329208] usb usb5: Product: UHCI Host Controller [ 5.329313] usb usb5: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd [ 5.329413] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.329563] usb usb5: uevent [ 5.329713] usb usb5: usb_probe_device [ 5.329801] usb usb5: configuration #1 chosen from 1 choice [ 5.329906] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 5.330029] usb 5-0:1.0: uevent [ 5.330179] hub 5-0:1.0: usb_probe_interface [ 5.330275] hub 5-0:1.0: usb_probe_interface - got id [ 5.330372] hub 5-0:1.0: USB hub found [ 5.330472] hub 5-0:1.0: 2 ports detected [ 5.330568] hub 5-0:1.0: standalone hub [ 5.330663] hub 5-0:1.0: no power switching (usb 1.0) [ 5.330761] hub 5-0:1.0: individual port over-current protection [ 5.330861] hub 5-0:1.0: power on to power good time: 2ms [ 5.330961] hub 5-0:1.0: local power source is good [ 5.331067] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 5.331184] drivers/usb/core/inode.c: creating file '001' [ 5.331381] initcall uhci_hcd_init+0x0/0x10a returned 0 after 17516 usecs [ 5.331476] calling usblp_init+0x0/0x16 @ 1 [ 5.331635] usbcore: registered new interface driver usblp [ 5.331730] initcall usblp_init+0x0/0x16 returned 0 after 152 usecs [ 5.331830] calling usb_stor_init+0x0/0x42 @ 1 [ 5.331927] Initializing USB Mass Storage driver... [ 5.332119] usbcore: registered new interface driver usb-storage [ 5.332211] USB Mass Storage support registered. [ 5.332319] initcall usb_stor_init+0x0/0x42 returned 0 after 381 usecs [ 5.332420] calling usb_usual_init+0x0/0x30 @ 1 [ 5.332603] usbcore: registered new interface driver libusual [ 5.332699] initcall usb_usual_init+0x0/0x30 returned 0 after 176 usecs [ 5.332801] calling i8042_init+0x0/0x35f @ 1 [ 5.333051] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.333202] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 5.341619] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.341716] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.341854] initcall i8042_init+0x0/0x35f returned 0 after 8744 usecs [ 5.341949] calling serport_init+0x0/0x2b @ 1 [ 5.342057] initcall serport_init+0x0/0x2b returned 0 after 1 usecs [ 5.342157] calling mousedev_init+0x0/0x51 @ 1 [ 5.342433] mice: PS/2 mouse device common for all mice [ 5.342526] initcall mousedev_init+0x0/0x51 returned 0 after 263 usecs [ 5.342627] calling evdev_init+0x0/0xf @ 1 [ 5.343079] initcall evdev_init+0x0/0xf returned 0 after 345 usecs [ 5.343173] calling atkbd_init+0x0/0x20 @ 1 [ 5.343350] initcall atkbd_init+0x0/0x20 returned 0 after 72 usecs [ 5.343444] calling psmouse_init+0x0/0x61 @ 1 [ 5.343667] initcall psmouse_init+0x0/0x61 returned 0 after 121 usecs [ 5.343761] calling cmos_init+0x0/0x65 @ 1 [ 5.343890] rtc_cmos 00:07: RTC can wake from S4 [ 5.344078] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 5.344201] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 5.344386] initcall cmos_init+0x0/0x65 returned 0 after 513 usecs [ 5.344480] calling i2c_i801_init+0x0/0x16 @ 1 [ 5.344596] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.344903] initcall i2c_i801_init+0x0/0x16 returned 0 after 316 usecs [ 5.344997] calling dm_init+0x0/0x39 @ 1 [ 5.345454] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 5.345590] initcall dm_init+0x0/0x39 returned 0 after 474 usecs [ 5.345690] calling dm_mirror_init+0x0/0x69 @ 1 [ 5.345811] initcall dm_mirror_init+0x0/0x69 returned 0 after 16 usecs [ 5.345912] calling dm_dirty_log_init+0x0/0x49 @ 1 [ 5.346021] initcall dm_dirty_log_init+0x0/0x49 returned 0 after 1 usecs [ 5.346122] calling dm_zero_init+0x0/0x28 @ 1 [ 5.346221] initcall dm_zero_init+0x0/0x28 returned 0 after 1 usecs [ 5.346330] calling cpufreq_gov_dbs_init+0x0/0x9f @ 1 [ 5.346526] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 88 usecs [ 5.346621] calling init_ladder+0x0/0xf @ 1 [ 5.347188] cpuidle: using governor ladder [ 5.348068] initcall init_ladder+0x0/0xf returned 0 after 1315 usecs [ 5.348169] calling init_menu+0x0/0xf @ 1 [ 5.349088] input: AT Translated Set 2 keyboard as /class/input/input5 [ 5.349518] cpuidle: using governor menu [ 5.349610] initcall init_menu+0x0/0xf returned 0 after 1308 usecs [ 5.349711] calling efivars_init+0x0/0x187 @ 1 [ 5.349810] initcall efivars_init+0x0/0x187 returned -19 after 1 usecs [ 5.349912] calling hid_init+0x0/0x3d @ 1 [ 5.350186] initcall hid_init+0x0/0x3d returned 0 after 165 usecs [ 5.350284] calling a4_init+0x0/0x16 @ 1 [ 5.350470] initcall a4_init+0x0/0x16 returned 0 after 71 usecs [ 5.350563] calling apple_init+0x0/0x2d @ 1 [ 5.350740] initcall apple_init+0x0/0x2d returned 0 after 76 usecs [ 5.350833] calling belkin_init+0x0/0x16 @ 1 [ 5.350989] initcall belkin_init+0x0/0x16 returned 0 after 56 usecs [ 5.351097] calling ch_init+0x0/0x16 @ 1 [ 5.351275] initcall ch_init+0x0/0x16 returned 0 after 77 usecs [ 5.351369] calling ch_init+0x0/0x16 @ 1 [ 5.351539] initcall ch_init+0x0/0x16 returned 0 after 70 usecs [ 5.351632] calling cp_init+0x0/0x16 @ 1 [ 5.351791] initcall cp_init+0x0/0x16 returned 0 after 60 usecs [ 5.351885] calling dr_init+0x0/0x16 @ 1 [ 5.352056] initcall dr_init+0x0/0x16 returned 0 after 71 usecs [ 5.352149] calling ez_init+0x0/0x16 @ 1 [ 5.352342] initcall ez_init+0x0/0x16 returned 0 after 93 usecs [ 5.352435] calling gyration_init+0x0/0x16 @ 1 [ 5.352620] initcall gyration_init+0x0/0x16 returned 0 after 83 usecs [ 5.352715] calling ks_init+0x0/0x16 @ 1 [ 5.352904] initcall ks_init+0x0/0x16 returned 0 after 89 usecs [ 5.352998] calling kye_init+0x0/0x16 @ 1 [ 5.353189] initcall kye_init+0x0/0x16 returned 0 after 73 usecs [ 5.353285] calling lg_init+0x0/0x16 @ 1 [ 5.353468] initcall lg_init+0x0/0x16 returned 0 after 71 usecs [ 5.353562] calling ms_init+0x0/0x16 @ 1 [ 5.353974] initcall ms_init+0x0/0x16 returned 0 after 300 usecs [ 5.354089] calling mr_init+0x0/0x16 @ 1 [ 5.354263] initcall mr_init+0x0/0x16 returned 0 after 72 usecs [ 5.354364] calling ntrig_init+0x0/0x16 @ 1 [ 5.354534] initcall ntrig_init+0x0/0x16 returned 0 after 69 usecs [ 5.354628] calling pl_init+0x0/0x16 @ 1 [ 5.354794] initcall pl_init+0x0/0x16 returned 0 after 66 usecs [ 5.354887] calling pl_init+0x0/0x16 @ 1 [ 5.355059] initcall pl_init+0x0/0x16 returned 0 after 72 usecs [ 5.355151] calling samsung_init+0x0/0x16 @ 1 [ 5.355343] initcall samsung_init+0x0/0x16 returned 0 after 90 usecs [ 5.355436] calling sjoy_init+0x0/0x16 @ 1 [ 5.355616] initcall sjoy_init+0x0/0x16 returned 0 after 79 usecs [ 5.355710] calling sony_init+0x0/0x16 @ 1 [ 5.355898] initcall sony_init+0x0/0x16 returned 0 after 87 usecs [ 5.355992] calling sp_init+0x0/0x16 @ 1 [ 5.356194] initcall sp_init+0x0/0x16 returned 0 after 85 usecs [ 5.356290] calling ga_init+0x0/0x16 @ 1 [ 5.356481] initcall ga_init+0x0/0x16 returned 0 after 75 usecs [ 5.356574] calling tm_init+0x0/0x16 @ 1 [ 5.356733] initcall tm_init+0x0/0x16 returned 0 after 59 usecs [ 5.356826] calling ts_init+0x0/0x16 @ 1 [ 5.357000] initcall ts_init+0x0/0x16 returned 0 after 67 usecs [ 5.357106] calling zp_init+0x0/0x16 @ 1 [ 5.357289] initcall zp_init+0x0/0x16 returned 0 after 82 usecs [ 5.357382] calling hid_init+0x0/0xaa @ 1 [ 5.357681] usbcore: registered new interface driver hiddev [ 5.357859] usbcore: registered new interface driver usbhid [ 5.357951] usbhid: v2.6:USB HID core driver [ 5.358071] initcall hid_init+0x0/0xaa returned 0 after 576 usecs [ 5.358171] calling usb_mouse_init+0x0/0x2d @ 1 [ 5.358602] usbcore: registered new interface driver usbmouse [ 5.358695] usbmouse: v1.6:USB HID Boot Protocol mouse driver [ 5.358797] initcall usb_mouse_init+0x0/0x2d returned 0 after 511 usecs [ 5.358899] calling eeepc_laptop_init+0x0/0x3e1 @ 1 [ 5.359180] initcall eeepc_laptop_init+0x0/0x3e1 returned -19 after 176 usecs [ 5.359277] calling init_soundcore+0x0/0x64 @ 1 [ 5.359459] initcall init_soundcore+0x0/0x64 returned 0 after 66 usecs [ 5.359553] calling alsa_sound_init+0x0/0x77 @ 1 [ 5.359667] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 5.359770] initcall alsa_sound_init+0x0/0x77 returned 0 after 113 usecs [ 5.359872] calling alsa_hwdep_init+0x0/0x46 @ 1 [ 5.359974] initcall alsa_hwdep_init+0x0/0x46 returned 0 after 3 usecs [ 5.360098] calling alsa_timer_init+0x0/0x12c @ 1 [ 5.360287] initcall alsa_timer_init+0x0/0x12c returned 0 after 88 usecs [ 5.360382] calling snd_hrtimer_init+0x0/0xd4 @ 1 [ 5.360482] initcall snd_hrtimer_init+0x0/0xd4 returned 0 after 1 usecs [ 5.360584] calling alsa_pcm_init+0x0/0x4d @ 1 [ 5.360684] initcall alsa_pcm_init+0x0/0x4d returned 0 after 2 usecs [ 5.360785] calling snd_mem_init+0x0/0x24 @ 1 [ 5.360887] initcall snd_mem_init+0x0/0x24 returned 0 after 3 usecs [ 5.360987] calling alsa_mixer_oss_init+0x0/0x2d @ 1 [ 5.361111] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 8 usecs [ 5.361206] calling alsa_pcm_oss_init+0x0/0x76 @ 1 [ 5.361322] initcall alsa_pcm_oss_init+0x0/0x76 returned 0 after 1 usecs [ 5.361431] calling alsa_seq_init+0x0/0x51 @ 1 [ 5.361905] initcall alsa_seq_init+0x0/0x51 returned 0 after 366 usecs [ 5.362000] calling alsa_seq_device_init+0x0/0x4e @ 1 [ 5.362110] initcall alsa_seq_device_init+0x0/0x4e returned 0 after 2 usecs [ 5.362212] calling alsa_seq_midi_event_init+0x0/0x7 @ 1 [ 5.362317] initcall alsa_seq_midi_event_init+0x0/0x7 returned 0 after 1 usecs [ 5.362466] calling alsa_seq_oss_init+0x0/0x130 @ 1 [ 5.362833] initcall alsa_seq_oss_init+0x0/0x130 returned 0 after 260 usecs [ 5.362929] calling alsa_seq_dummy_init+0x0/0xa7 @ 1 [ 5.363059] initcall alsa_seq_dummy_init+0x0/0xa7 returned 0 after 14 usecs [ 5.363153] calling patch_realtek_init+0x0/0xf @ 1 [ 5.363258] initcall patch_realtek_init+0x0/0xf returned 0 after 4 usecs [ 5.363371] calling patch_cmedia_init+0x0/0xf @ 1 [ 5.363472] initcall patch_cmedia_init+0x0/0xf returned 0 after 1 usecs [ 5.363572] calling patch_analog_init+0x0/0xf @ 1 [ 5.363673] initcall patch_analog_init+0x0/0xf returned 0 after 1 usecs [ 5.363773] calling patch_sigmatel_init+0x0/0xf @ 1 [ 5.363874] initcall patch_sigmatel_init+0x0/0xf returned 0 after 1 usecs [ 5.363975] calling patch_si3054_init+0x0/0xf @ 1 [ 5.364082] initcall patch_si3054_init+0x0/0xf returned 0 after 1 usecs [ 5.364183] calling patch_atihdmi_init+0x0/0xf @ 1 [ 5.364286] initcall patch_atihdmi_init+0x0/0xf returned 0 after 1 usecs [ 5.364397] calling patch_ca0110_init+0x0/0xf @ 1 [ 5.364497] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs [ 5.364597] calling patch_conexant_init+0x0/0xf @ 1 [ 5.364697] initcall patch_conexant_init+0x0/0xf returned 0 after 1 usecs [ 5.364798] calling patch_via_init+0x0/0xf @ 1 [ 5.364898] initcall patch_via_init+0x0/0xf returned 0 after 1 usecs [ 5.364998] calling patch_nvhdmi_init+0x0/0xf @ 1 [ 5.365106] initcall patch_nvhdmi_init+0x0/0xf returned 0 after 1 usecs [ 5.365208] calling patch_intelhdmi_init+0x0/0xf @ 1 [ 5.365312] initcall patch_intelhdmi_init+0x0/0xf returned 0 after 1 usecs [ 5.365425] calling alsa_card_azx_init+0x0/0x16 @ 1 [ 5.365557] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.365689] hda_intel: probe_mask set to 0x1 for device 17aa:2010 [ 5.365808] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.399675] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 33348 usecs [ 5.399772] calling alsa_sound_last_init+0x0/0x50 @ 1 [ 5.399872] ALSA device list: [ 5.399965] #0: HDA Intel at 0xee240000 irq 17 [ 5.400078] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 199 usecs [ 5.400181] calling flow_cache_init+0x0/0x141 @ 1 [ 5.400318] initcall flow_cache_init+0x0/0x141 returned 0 after 33 usecs [ 5.400412] calling llc_init+0x0/0x1b @ 1 [ 5.400512] initcall llc_init+0x0/0x1b returned 0 after 1 usecs [ 5.400612] calling snap_init+0x0/0x31 @ 1 [ 5.400710] initcall snap_init+0x0/0x31 returned 0 after 1 usecs [ 5.400811] calling rif_init+0x0/0x6b @ 1 [ 5.400934] initcall rif_init+0x0/0x6b returned 0 after 24 usecs [ 5.401056] calling blackhole_module_init+0x0/0xf @ 1 [ 5.401158] initcall blackhole_module_init+0x0/0xf returned 0 after 1 usecs [ 5.401263] calling nfnetlink_init+0x0/0x51 @ 1 [ 5.401372] Netfilter messages via NETLINK v0.30. [ 5.401479] initcall nfnetlink_init+0x0/0x51 returned 0 after 102 usecs [ 5.401581] calling nfnetlink_log_init+0x0/0xb3 @ 1 [ 5.401699] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 10 usecs [ 5.401802] calling nf_conntrack_standalone_init+0x0/0xf @ 1 [ 5.401903] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.402740] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 816 usecs [ 5.402874] calling ctnetlink_init+0x0/0x62 @ 1 [ 5.402971] ctnetlink v0.93: registering with nfnetlink. [ 5.403091] initcall ctnetlink_init+0x0/0x62 returned 0 after 115 usecs [ 5.403194] calling nf_conntrack_ftp_init+0x0/0x189 @ 1 [ 5.403300] initcall nf_conntrack_ftp_init+0x0/0x189 returned 0 after 3 usecs [ 5.403412] calling nf_conntrack_irc_init+0x0/0x17e @ 1 [ 5.403517] initcall nf_conntrack_irc_init+0x0/0x17e returned 0 after 2 usecs [ 5.403619] calling nf_conntrack_sip_init+0x0/0x159 @ 1 [ 5.403721] initcall nf_conntrack_sip_init+0x0/0x159 returned 0 after 1 usecs [ 5.403823] calling xt_init+0x0/0xda @ 1 [ 5.403922] initcall xt_init+0x0/0xda returned 0 after 1 usecs [ 5.404029] calling tcpudp_mt_init+0x0/0x14 @ 1 [ 5.404130] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 2 usecs [ 5.404231] calling connsecmark_tg_init+0x0/0xf @ 1 [ 5.404345] initcall connsecmark_tg_init+0x0/0xf returned 0 after 10 usecs [ 5.404447] calling mark_tg_init+0x0/0x14 @ 1 [ 5.404547] initcall mark_tg_init+0x0/0x14 returned 0 after 1 usecs [ 5.404648] calling nflog_tg_init+0x0/0xf @ 1 [ 5.404747] initcall nflog_tg_init+0x0/0xf returned 0 after 1 usecs [ 5.404848] calling secmark_tg_init+0x0/0xf @ 1 [ 5.404948] initcall secmark_tg_init+0x0/0xf returned 0 after 1 usecs [ 5.405057] calling tcpmss_tg_init+0x0/0x14 @ 1 [ 5.405156] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 1 usecs [ 5.405259] calling conntrack_mt_init+0x0/0x14 @ 1 [ 5.405374] initcall conntrack_mt_init+0x0/0x14 returned 0 after 1 usecs [ 5.405475] calling mark_mt_init+0x0/0x14 @ 1 [ 5.405757] initcall mark_mt_init+0x0/0x14 returned 0 after 172 usecs [ 5.405851] calling policy_mt_init+0x0/0x14 @ 1 [ 5.405952] initcall policy_mt_init+0x0/0x14 returned 0 after 1 usecs [ 5.406838] calling state_mt_init+0x0/0x14 @ 1 [ 5.406946] initcall state_mt_init+0x0/0x14 returned 0 after 1 usecs [ 5.407052] calling sysctl_ipv4_init+0x0/0x3f @ 1 [ 5.407600] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 438 usecs [ 5.407694] calling init_syncookies+0x0/0x16 @ 1 [ 5.407844] initcall init_syncookies+0x0/0x16 returned 0 after 48 usecs [ 5.407938] calling tunnel4_init+0x0/0x5a @ 1 [ 5.408045] initcall tunnel4_init+0x0/0x5a returned 0 after 1 usecs [ 5.408147] calling ipv4_netfilter_init+0x0/0xf @ 1 [ 5.408248] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 1 usecs [ 5.408352] calling nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1 [ 5.409022] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 535 usecs [ 5.409154] calling nf_nat_init+0x0/0xea @ 1 [ 5.409290] initcall nf_nat_init+0x0/0xea returned 0 after 36 usecs [ 5.409383] calling nf_defrag_init+0x0/0x14 @ 1 [ 5.409483] initcall nf_defrag_init+0x0/0x14 returned 0 after 1 usecs [ 5.409584] calling nf_nat_ftp_init+0x0/0x1e @ 1 [ 5.409684] initcall nf_nat_ftp_init+0x0/0x1e returned 0 after 1 usecs [ 5.409784] calling nf_nat_irc_init+0x0/0x1e @ 1 [ 5.409884] initcall nf_nat_irc_init+0x0/0x1e returned 0 after 1 usecs [ 5.409983] calling nf_nat_sip_init+0x0/0x91 @ 1 [ 5.410091] initcall nf_nat_sip_init+0x0/0x91 returned 0 after 1 usecs [ 5.410191] calling ip_tables_init+0x0/0x92 @ 1 [ 5.410298] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.410407] initcall ip_tables_init+0x0/0x92 returned 0 after 112 usecs [ 5.410507] calling iptable_filter_init+0x0/0x5d @ 1 [ 5.410615] initcall iptable_filter_init+0x0/0x5d returned 0 after 8 usecs [ 5.410716] calling iptable_mangle_init+0x0/0x38 @ 1 [ 5.410822] initcall iptable_mangle_init+0x0/0x38 returned 0 after 5 usecs [ 5.410924] calling nf_nat_standalone_init+0x0/0x73 @ 1 [ 5.411036] initcall nf_nat_standalone_init+0x0/0x73 returned 0 after 5 usecs [ 5.411139] calling log_tg_init+0x0/0x24 @ 1 [ 5.411239] initcall log_tg_init+0x0/0x24 returned 0 after 1 usecs [ 5.411342] calling masquerade_tg_init+0x0/0x2d @ 1 [ 5.411693] initcall masquerade_tg_init+0x0/0x2d returned 0 after 225 usecs [ 5.411788] calling reject_tg_init+0x0/0xf @ 1 [ 5.411888] initcall reject_tg_init+0x0/0xf returned 0 after 1 usecs [ 5.411989] calling ulog_tg_init+0x0/0xbe @ 1 [ 5.412099] initcall ulog_tg_init+0x0/0xbe returned 0 after 4 usecs [ 5.412199] calling cubictcp_register+0x0/0x93 @ 1 [ 5.412301] TCP cubic registered [ 5.412410] initcall cubictcp_register+0x0/0x93 returned 0 after 105 usecs [ 5.412512] calling xfrm_user_init+0x0/0x40 @ 1 [ 5.412608] Initializing XFRM netlink socket [ 5.412709] initcall xfrm_user_init+0x0/0x40 returned 0 after 97 usecs [ 5.412810] calling inet6_init+0x0/0x277 @ 1 [ 5.413051] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT [ 5.413184] hub 1-0:1.0: port 8: status 0501 change 0001 [ 5.413671] NET: Registered protocol family 10 [ 5.415678] initcall inet6_init+0x0/0x277 returned 0 after 2703 usecs [ 5.415774] calling ah6_init+0x0/0x5a @ 1 [ 5.415875] initcall ah6_init+0x0/0x5a returned 0 after 1 usecs [ 5.415974] calling esp6_init+0x0/0x5a @ 1 [ 5.416081] initcall esp6_init+0x0/0x5a returned 0 after 1 usecs [ 5.416181] calling xfrm6_transport_init+0x0/0x14 @ 1 [ 5.416285] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs [ 5.416396] calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1 [ 5.416497] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs [ 5.416598] calling xfrm6_beet_init+0x0/0x14 @ 1 [ 5.416698] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs [ 5.416799] calling ip6_tables_init+0x0/0x92 @ 1 [ 5.416904] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.417011] initcall ip6_tables_init+0x0/0x92 returned 0 after 110 usecs [ 5.417113] calling ip6table_filter_init+0x0/0x5d @ 1 [ 5.417459] initcall ip6table_filter_init+0x0/0x5d returned 0 after 233 usecs [ 5.417560] calling ip6table_mangle_init+0x0/0x38 @ 1 [ 5.417668] initcall ip6table_mangle_init+0x0/0x38 returned 0 after 6 usecs [ 5.417769] calling nf_conntrack_l3proto_ipv6_init+0x0/0xef @ 1 [ 5.417937] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xef returned 0 after 64 usecs [ 5.418102] calling ipv6header_mt6_init+0x0/0xf @ 1 [ 5.418205] initcall ipv6header_mt6_init+0x0/0xf returned 0 after 1 usecs [ 5.418309] calling log_tg6_init+0x0/0x24 @ 1 [ 5.418419] initcall log_tg6_init+0x0/0x24 returned 0 after 1 usecs [ 5.418520] calling reject_tg6_init+0x0/0xf @ 1 [ 5.418619] initcall reject_tg6_init+0x0/0xf returned 0 after 1 usecs [ 5.418719] calling sit_init+0x0/0x5f @ 1 [ 5.418815] IPv6 over IPv4 tunneling driver [ 5.419018] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.419887] initcall sit_init+0x0/0x5f returned 0 after 1044 usecs [ 5.419980] calling packet_init+0x0/0x39 @ 1 [ 5.420086] NET: Registered protocol family 17 [ 5.420426] initcall packet_init+0x0/0x39 returned 0 after 329 usecs [ 5.420528] calling init_sunrpc+0x0/0x53 @ 1 [ 5.420932] RPC: Registered udp transport module. [ 5.421031] RPC: Registered tcp transport module. [ 5.421131] initcall init_sunrpc+0x0/0x53 returned 0 after 492 usecs [ 5.421232] calling init_rpcsec_gss+0x0/0x3f @ 1 [ 5.421344] initcall init_rpcsec_gss+0x0/0x3f returned 0 after 8 usecs [ 5.421453] calling init_kerberos_module+0x0/0x26 @ 1 [ 5.421556] initcall init_kerberos_module+0x0/0x26 returned 0 after 4 usecs [ 5.421661] calling severities_debugfs_init+0x0/0x4e @ 1 [ 5.421770] initcall severities_debugfs_init+0x0/0x4e returned 0 after 9 usecs [ 5.421910] calling acpi_cpufreq_init+0x0/0xbf @ 1 [ 5.422347] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.426065] initcall acpi_cpufreq_init+0x0/0xbf returned 0 after 3951 usecs [ 5.426162] calling hpet_insert_resource+0x0/0x1e @ 1 [ 5.426271] initcall hpet_insert_resource+0x0/0x1e returned 0 after 4 usecs [ 5.426381] calling update_mp_table+0x0/0x3ad @ 1 [ 5.426482] initcall update_mp_table+0x0/0x3ad returned 0 after 1 usecs [ 5.426590] calling lapic_insert_resource+0x0/0x33 @ 1 [ 5.426691] initcall lapic_insert_resource+0x0/0x33 returned 0 after 1 usecs [ 5.426793] calling print_ipi_mode+0x0/0x26 @ 1 [ 5.426890] Using IPI No-Shortcut mode [ 5.426986] initcall print_ipi_mode+0x0/0x26 returned 0 after 92 usecs [ 5.427096] calling init_lapic_nmi_sysfs+0x0/0x33 @ 1 [ 5.427196] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 1 usecs [ 5.427301] calling io_apic_bug_finalize+0x0/0x1c @ 1 [ 5.427415] initcall io_apic_bug_finalize+0x0/0x1c returned 0 after 2 usecs [ 5.427517] calling check_early_ioremap_leak+0x0/0x5e @ 1 [ 5.427619] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 1 usecs [ 5.427758] calling pat_memtype_list_init+0x0/0x23 @ 1 [ 5.428110] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.428218] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 351 usecs [ 5.428361] calling init_oops_id+0x0/0x3a @ 1 [ 5.428473] initcall init_oops_id+0x0/0x3a returned 0 after 1 usecs [ 5.428574] calling disable_boot_consoles+0x0/0x3a @ 1 [ 5.428675] initcall disable_boot_consoles+0x0/0x3a returned 0 after 1 usecs [ 5.428777] calling pm_qos_power_init+0x0/0x54 @ 1 [ 5.429120] initcall pm_qos_power_init+0x0/0x54 returned 0 after 237 usecs [ 5.429216] calling software_resume+0x0/0x19d @ 1 [ 5.429319] PM: Resume from disk failed. [ 5.429429] initcall software_resume+0x0/0x19d returned -2 after 105 usecs [ 5.429531] initcall software_resume+0x0/0x19d returned with error code -2 [ 5.429635] calling debugfs_kprobe_init+0x0/0x78 @ 1 [ 5.429742] initcall debugfs_kprobe_init+0x0/0x78 returned 0 after 7 usecs [ 5.429844] calling taskstats_init+0x0/0x7d @ 1 [ 5.429945] registered taskstats version 1 [ 5.430051] initcall taskstats_init+0x0/0x7d returned 0 after 107 usecs [ 5.430153] calling clear_boot_tracer+0x0/0x27 @ 1 [ 5.430253] initcall clear_boot_tracer+0x0/0x27 returned 0 after 1 usecs [ 5.430358] calling max_swapfiles_check+0x0/0x7 @ 1 [ 5.430470] initcall max_swapfiles_check+0x0/0x7 returned 0 after 1 usecs [ 5.430571] calling random32_reseed+0x0/0x7e @ 1 [ 5.430684] initcall random32_reseed+0x0/0x7e returned 0 after 14 usecs [ 5.430786] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1 [ 5.430892] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 3 usecs [ 5.431048] calling pci_sysfs_init+0x0/0x44 @ 1 [ 5.431161] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 [ 5.431714] initcall pci_sysfs_init+0x0/0x44 returned 0 after 554 usecs [ 5.431811] calling seqgen_init+0x0/0xe @ 1 [ 5.431927] initcall seqgen_init+0x0/0xe returned 0 after 16 usecs [ 5.432038] calling late_resume_init+0x0/0xc2 @ 1 [ 5.432136] Magic number: 5:366:74 [ 5.432316] initcall late_resume_init+0x0/0xc2 returned 0 after 174 usecs [ 5.432410] calling scsi_complete_async_scans+0x0/0xf4 @ 1 [ 5.432511] initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 1 usecs [ 5.432649] calling memmap_init+0x0/0x8a @ 1 [ 5.432807] initcall memmap_init+0x0/0x8a returned 0 after 59 usecs [ 5.432901] calling pci_mmcfg_late_insert_resources+0x0/0x12e @ 1 [ 5.433013] initcall pci_mmcfg_late_insert_resources+0x0/0x12e returned 0 after 10 usecs [ 5.433153] calling tcp_congestion_default+0x0/0xf @ 1 [ 5.433257] initcall tcp_congestion_default+0x0/0xf returned 0 after 1 usecs [ 5.433372] calling ip_auto_config+0x0/0xd22 @ 1 [ 5.433475] initcall ip_auto_config+0x0/0xd22 returned 0 after 4 usecs [ 5.433576] calling initialize_hashrnd+0x0/0x16 @ 1 [ 5.433680] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs [ 5.512059] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000 [ 5.512156] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s [ 5.563254] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion [ 5.563350] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT [ 5.563490] hub 1-0:1.0: port 8 not reset yet, waiting 50ms [ 5.614058] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC [ 5.614211] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.614311] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 [ 5.704097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 5.704195] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 [ 5.704315] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 5.808059] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 5.910056] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 6.000070] Clocksource tsc unstable (delta = -270104002 ns) [ 6.011844] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 6.011976] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 6.030026] usb 5-2: ep0 maxpacket = 8 [ 6.053781] usb 5-2: default language 0x0409 [ 6.054626] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 6.058807] async_waiting @ 1 [ 6.058903] async_continuing @ 1 after 1 usec [ 6.059373] md: Waiting for all devices to be available before autodetect [ 6.059470] md: If you don't use raid, use raid=noautodetect [ 6.072781] usb 5-2: udev 2, busnum 5, minor = 513 [ 6.072872] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 6.072973] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.073094] usb 5-2: Product: Biometric Coprocessor [ 6.073190] usb 5-2: Manufacturer: STMicroelectronics [ 6.073349] usb 5-2: uevent [ 6.073630] usb 5-2: usb_probe_device [ 6.073719] usb 5-2: configuration #1 chosen from 1 choice [ 6.075783] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 6.075892] usb 5-2:1.0: uevent [ 6.076112] drivers/usb/core/inode.c: creating file '002' [ 6.076222] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 6.454033] usb usb2: suspend_rh (auto-stop) [ 6.454146] usb usb3: suspend_rh (auto-stop) [ 6.454261] usb usb4: suspend_rh (auto-stop) [ 7.704063] hub 2-0:1.0: hub_suspend [ 7.704155] usb usb2: bus auto-suspend [ 7.704249] usb usb2: suspend_rh [ 7.704367] hub 3-0:1.0: hub_suspend [ 7.704456] usb usb3: bus auto-suspend [ 7.704551] usb usb3: suspend_rh [ 7.704660] hub 4-0:1.0: hub_suspend [ 7.704748] usb usb4: bus auto-suspend [ 7.704843] usb usb4: suspend_rh [ 7.704952] hub 1-0:1.0: hub_suspend [ 7.705050] usb usb1: bus auto-suspend [ 7.705154] ehci_hcd 0000:00:1d.7: suspend root hub [ 11.497204] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.725545] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 11.807485] async_waiting @ 1 [ 11.807575] async_continuing @ 1 after 1 usec [ 11.807943] md: Autodetecting RAID arrays. [ 11.808049] md: Scanned 0 and added 0 devices. [ 11.808146] md: autorun ... [ 11.808240] md: ... autorun DONE. [ 12.181957] kjournald starting. Commit interval 5 seconds [ 12.181982] EXT3-fs: mounted filesystem with writeback data mode. [ 12.181993] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 12.182046] async_waiting @ 1 [ 12.182050] async_continuing @ 1 after 1 usec [ 12.182062] Freeing unused kernel memory: 376k freed [ 12.182560] Write protecting the kernel text: 4500k [ 12.182721] Write protecting the kernel read-only data: 2196k [ 13.464436] sh used greatest stack depth: 6284 bytes left [ 14.209169] mount used greatest stack depth: 6256 bytes left [ 15.252079] awk used greatest stack depth: 5956 bytes left [ 16.155028] eth0: no IPv6 routers present [ 16.398723] readahead[895]: segfault at 0 ip 00c693b3 sp bfdbd30c error 4 in libc-2.9.so[bf2000+16e000] [ 16.929854] usb usb2: uevent [ 16.929976] usb 2-0:1.0: uevent [ 16.930154] usb usb3: uevent [ 16.930269] usb 3-0:1.0: uevent [ 16.930424] usb usb4: uevent [ 16.930547] usb 4-0:1.0: uevent [ 16.930696] usb usb5: uevent [ 16.930809] usb 5-0:1.0: uevent [ 16.930935] usb 5-2: uevent [ 16.931069] usb 5-2:1.0: uevent [ 16.931226] usb usb1: uevent [ 16.931350] usb 1-0:1.0: uevent [ 25.714165] EXT3 FS on sda1, internal journal [ 27.705850] Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k [ 29.035661] ip used greatest stack depth: 5752 bytes left [ 45.490796] CPUFREQ: ondemand sampling_rate_max sysfs file is deprecated - used by: cat [ 102.555904] ssh used greatest stack depth: 5312 bytes left