From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: mingo@redhat.com, hpa@zytor.com, linux-kernel@vger.kernel.org,
tglx@linutronix.de, linux-tip-commits@vger.kernel.org
Subject: Re: [tip:core/rcu] rcu: Add second diagnostic check for a possible CPU-hotplug race
Date: Sun, 9 Aug 2009 11:30:10 -0700 [thread overview]
Message-ID: <20090809183010.GF6866@linux.vnet.ibm.com> (raw)
In-Reply-To: <20090809111008.GA1829@elte.hu>
On Sun, Aug 09, 2009 at 01:10:08PM +0200, Ingo Molnar wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > > rcu: Add second diagnostic check for a possible CPU-hotplug race
> >
> > has a build problem too:
> >
> > kernel/built-in.o: In function `rcu_cpu_notified':
> > (.text+0x1d787): undefined reference to `cpu_notified'
> > kernel/built-in.o: In function `rcu_init':
> > (.init.text+0x1174): undefined reference to `cpu_notified'
> > kernel/built-in.o: In function `rcu_init':
> > (.init.text+0x11a8): undefined reference to `cpu_notified'
> >
> > Maybe we should simplify all those Kconfig rules? It's a maze.
Or I could fix up my scripts so that I once again test the relevant
combinations -before- I submit the patch. :-/
> a testbox still managed to sneak in, build another config, boot it
> and trigger the warning below - is this what you were after? Bootlog
> below, config attached.
Sigh! I have once again managed to disable testing of !CPU_HOTPLUG. :-(
Patch under way...
Thanx, Paul
> Ingo
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.31-rc5-tip (mingo@europe) (gcc version 4.2.2) #7134 SMP Sun Aug 9 13:04:19 CEST 2009
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] NSC Geode by NSC
> [ 0.000000] Cyrix CyrixInstead
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Transmeta GenuineTMx86
> [ 0.000000] Transmeta TransmetaCPU
> [ 0.000000] UMC UMC UMC UMC
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
> [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> [ 0.000000] debug: ignoring loglevel setting.
> [ 0.000000] DMI present.
> [ 0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-DBFFF uncachable
> [ 0.000000] DC000-DFFFF write-back
> [ 0.000000] E0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
> [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] PAT not supported by CPU.
> [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
> [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
> [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
> [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
> [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
> [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 000000007f6e0000 (usable)
> [ 0.000000] modified: 000000007f6e0000 - 000000007f6f3000 (ACPI data)
> [ 0.000000] modified: 000000007f6f3000 - 000000007f700000 (ACPI NVS)
> [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved)
> [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
> [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
> [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
> [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved)
> [ 0.000000] initial memory mapped : 0 - 01c00000
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
> [ 0.000000] 0000000000 - 0000400000 page 4k
> [ 0.000000] 0000400000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00377fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
> [ 0.000000] ACPI: RSDP 000f68a0 00024 (v02 LENOVO)
> [ 0.000000] ACPI: XSDT 7f6e631f 00074 (v01 LENOVO TP-79 00001020 LTP 00000000)
> [ 0.000000] ACPI: FACP 7f6e6400 000F4 (v03 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
> [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558
> [ 0.000000] ACPI: DSDT 7f6e65e7 0C765 (v01 LENOVO TP-79 00001020 MSFT 0100000E)
> [ 0.000000] ACPI: FACS 7f6f4000 00040
> [ 0.000000] ACPI: SSDT 7f6e65b4 00033 (v01 LENOVO TP-79 00001020 MSFT 0100000E)
> [ 0.000000] ACPI: ECDT 7f6f2d4c 00052 (v01 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI: TCPA 7f6f2d9e 00032 (v02 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI: APIC 7f6f2dd0 00068 (v01 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI: MCFG 7f6f2e38 0003E (v01 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI: HPET 7f6f2e76 00038 (v01 LENOVO TP-79 00001020 LNVO 00000001)
> [ 0.000000] ACPI: BOOT 7f6f2fd8 00028 (v01 LENOVO TP-79 00001020 LTP 00000001)
> [ 0.000000] ACPI: SSDT 7f6e58da 00507 (v01 LENOVO TP-79 00001020 INTL 20050513)
> [ 0.000000] ACPI: SSDT 7f6e5702 001D8 (v01 LENOVO TP-79 00001020 INTL 20050513)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 1150MB HIGHMEM available.
> [ 0.000000] 887MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 377fe000
> [ 0.000000] low ram: 0 - 377fe000
> [ 0.000000] node 0 low ram: 00000000 - 377fe000
> [ 0.000000] node 0 bootmap 00008000 - 0000ef00
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> [ 0.000000] #3 [0001000000 - 00018150c8] TEXT DATA BSS ==> [0001000000 - 00018150c8]
> [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
> [ 0.000000] #5 [0001816000 - 000181d138] BRK ==> [0001816000 - 000181d138]
> [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
> [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
> [ 0.000000] Scan SMP from c0000000 for 1024 bytes.
> [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
> [ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
> [ 0.000000] found SMP MP-table at [c00f68e0] f68e0
> [ 0.000000] mpc: 9f5a1-9f6b5
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000377fe
> [ 0.000000] HighMem 0x000377fe -> 0x0007f6e0
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x00000002
> [ 0.000000] 0: 0x00000006 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0007f6e0
> [ 0.000000] On node 0 totalpages: 521851
> [ 0.000000] free_area_init_node: node 0, pgdat c16f3c20, node_mem_map c181e000
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1744 pages used for memmap
> [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 2302 pages used for memmap
> [ 0.000000] HighMem zone: 292324 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] nr_irqs_gsi: 24
> [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
> [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
> [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
> [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages at c2818000, static data 33436 bytes
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517773
> [ 0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 3 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.21/00:30:48:c6:86:26
> [ 0.000000] kernel profiling enabled (shift: 0)
> [ 0.000000] debug: sysrq always enabled.
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6e0)
> [ 0.000000] Memory: 2061020k/2087808k available (4496k kernel code, 25604k reserved, 2686k data, 376k init, 1178504k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB)
> [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> [ 0.000000] .init : 0xc170b000 - 0xc1769000 ( 376 kB)
> [ 0.000000] .data : 0xc14643fd - 0xc1703f68 (2686 kB)
> [ 0.000000] .text : 0xc1000000 - 0xc14643fd (4496 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at kernel/rcupdate.c:259 rcu_init+0x2b/0xa0()
> [ 0.000000] Hardware name: 1951A26
> [ 0.000000] Modules linked in:
> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #7134
> [ 0.000000] Call Trace:
> [ 0.000000] [<c102ec3b>] warn_slowpath_common+0x60/0x77
> [ 0.000000] [<c102ec5f>] warn_slowpath_null+0xd/0x10
> [ 0.000000] [<c171c929>] rcu_init+0x2b/0xa0
> [ 0.000000] [<c170b6f3>] start_kernel+0x184/0x2ca
> [ 0.000000] [<c170b06a>] __init_begin+0x6a/0x6f
> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
> [ 0.000000] NR_IRQS:2304 nr_irqs:424
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 1828.477 MHz processor.
> [ 0.000999] Console: colour VGA+ 80x25
> [ 0.000999] console [tty0] enabled
> [ 0.000999] hpet clockevent registered
> [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3656.95 BogoMIPS (lpj=1828477)
> [ 0.000999] Security Framework initialized
> [ 0.000999] SELinux: Initializing.
> [ 0.000999] SELinux: Starting in permissive mode
> [ 0.000999] Mount-cache hash table entries: 512
> [ 0.000999] Initializing cgroup subsys ns
> [ 0.000999] Initializing cgroup subsys cpuacct
> [ 0.001013] Initializing cgroup subsys freezer
> [ 0.001119] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.001249] CPU: L2 cache: 2048K
> [ 0.001336] CPU: Physical Processor ID: 0
> [ 0.001422] CPU: Processor Core ID: 0
> [ 0.001510] mce: CPU supports 6 MCE banks
> [ 0.001605] CPU0: Thermal monitoring enabled (TM2)
> [ 0.001694] using mwait in idle threads.
> [ 0.001786] Performance Counters: no PMU driver, software counters only.
> [ 0.002005] Checking 'hlt' instruction... OK.
> [ 0.006584] ACPI: Core revision 20090521
> [ 0.027076] enabled ExtINT on CPU#0
> [ 0.028075] ENABLING IO-APIC IRQs
> [ 0.028161] init IO_APIC IRQs
> [ 0.028246] 1-0 (apicid-pin) not connected
> [ 0.028377] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
> [ 0.028508] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
> [ 0.028640] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
> [ 0.028772] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
> [ 0.028904] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
> [ 0.029001] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
> [ 0.029132] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
> [ 0.029264] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> [ 0.029397] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
> [ 0.029528] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
> [ 0.029659] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
> [ 0.029791] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
> [ 0.029923] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> [ 0.030000] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
> [ 0.030131] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
> [ 0.030261] 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected
> [ 0.030875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.041069] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
> [ 0.041248] Using local APIC timer interrupts.
> [ 0.041250] calibrating APIC timer ...
> [ 0.041993] ... lapic delta = 1039050
> [ 0.041993] ... PM-Timer delta = 357950
> [ 0.041993] ... PM-Timer result ok
> [ 0.041993] ..... delta 1039050
> [ 0.041993] ..... mult: 44633642
> [ 0.041993] ..... calibration result: 166248
> [ 0.041993] ..... CPU clock speed is 1828.0727 MHz.
> [ 0.041993] ..... host bus clock speed is 166.0248 MHz.
> [ 0.041993] calling migration_init+0x0/0x47 @ 1
> [ 0.041993] initcall migration_init+0x0/0x47 returned 0 after 0 usecs
> [ 0.041993] calling spawn_ksoftirqd+0x0/0x47 @ 1
> [ 0.041993] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs
> [ 0.041993] calling init_call_single_data+0x0/0x6d @ 1
> [ 0.041993] initcall init_call_single_data+0x0/0x6d returned 0 after 0 usecs
> [ 0.041993] calling relay_init+0x0/0x11 @ 1
> [ 0.041993] initcall relay_init+0x0/0x11 returned 0 after 0 usecs
> [ 0.041993] calling tracer_alloc_buffers+0x0/0x12d @ 1
> [ 0.041993] initcall tracer_alloc_buffers+0x0/0x12d returned 0 after 0 usecs
> [ 0.041998] calling init_trace_printk+0x0/0xf @ 1
> [ 0.042087] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
> [ 0.042253] Booting processor 1 APIC 0x1 ip 0x6000
> [ 0.000999] Initializing CPU#1
> [ 0.000999] masked ExtINT on CPU#1
> [ 0.000999] Calibrating delay using timer specific routine.. 3657.34 BogoMIPS (lpj=1828674)
> [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.000999] CPU: L2 cache: 2048K
> [ 0.000999] CPU: Physical Processor ID: 0
> [ 0.000999] CPU: Processor Core ID: 1
> [ 0.000999] mce: CPU supports 6 MCE banks
> [ 0.000999] CPU1: Thermal monitoring enabled (TM2)
> [ 0.113434] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
> [ 0.114126] checking TSC synchronization [CPU#0 -> CPU#1]:
> [ 0.114982] Measured 579865 cycles TSC warp between CPUs, turning off TSC clock.
> [ 0.114982] Marking TSC unstable due to check_tsc_sync_source failed
> [ 0.115008] Brought up 2 CPUs
> [ 0.115095] Total of 2 processors activated (7314.30 BogoMIPS).
> [ 0.116092] khelper used greatest stack depth: 6944 bytes left
> [ 0.116167] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
> [ 0.116167] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
> [ 0.116275] calling net_ns_init+0x0/0xc0 @ 1
> [ 0.116384] initcall net_ns_init+0x0/0xc0 returned 0 after 0 usecs
> [ 0.116384] calling e820_mark_nvs_memory+0x0/0x37 @ 1
> [ 0.116989] initcall e820_mark_nvs_memory+0x0/0x37 returned 0 after 0 usecs
> [ 0.117084] calling cpufreq_tsc+0x0/0x25 @ 1
> [ 0.117172] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
> [ 0.117265] calling pci_reboot_init+0x0/0x11 @ 1
> [ 0.117355] initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
> [ 0.117447] calling reboot_init+0x0/0x11 @ 1
> [ 0.117540] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
> [ 0.117633] calling init_lapic_sysfs+0x0/0x28 @ 1
> [ 0.117730] initcall init_lapic_sysfs+0x0/0x28 returned 0 after 0 usecs
> [ 0.117989] calling init_smp_flush+0x0/0x20 @ 1
> [ 0.118078] initcall init_smp_flush+0x0/0x20 returned 0 after 0 usecs
> [ 0.118172] calling alloc_frozen_cpus+0x0/0x9 @ 1
> [ 0.118262] initcall alloc_frozen_cpus+0x0/0x9 returned 0 after 0 usecs
> [ 0.118355] calling sysctl_init+0x0/0x29 @ 1
> [ 0.118584] initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs
> [ 0.118676] calling ksysfs_init+0x0/0x96 @ 1
> [ 0.118773] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs
> [ 0.118865] calling async_init+0x0/0x3c @ 1
> [ 0.118954] initcall async_init+0x0/0x3c returned 0 after 0 usecs
> [ 0.118986] calling init_jiffies_clocksource+0x0/0xf @ 1
> [ 0.119078] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
> [ 0.119206] calling pm_init+0x0/0x2d @ 1
> [ 0.119299] initcall pm_init+0x0/0x2d returned 0 after 0 usecs
> [ 0.119389] calling pm_disk_init+0x0/0x14 @ 1
> [ 0.119480] initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs
> [ 0.119573] calling swsusp_header_init+0x0/0x26 @ 1
> [ 0.119663] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs
> [ 0.119756] calling init_hw_breakpoint+0x0/0xf @ 1
> [ 0.119848] initcall init_hw_breakpoint+0x0/0xf returned 0 after 0 usecs
> [ 0.119986] calling filelock_init+0x0/0x27 @ 1
> [ 0.120075] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
> [ 0.120167] calling init_misc_binfmt+0x0/0x35 @ 1
> [ 0.120259] initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
> [ 0.120351] calling init_script_binfmt+0x0/0x11 @ 1
> [ 0.120442] initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
> [ 0.120534] calling init_elf_binfmt+0x0/0x11 @ 1
> [ 0.120623] initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
> [ 0.120716] calling debugfs_init+0x0/0x4a @ 1
> [ 0.120808] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
> [ 0.120901] calling random32_init+0x0/0xa4 @ 1
> [ 0.120985] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
> [ 0.121079] calling early_resume_init+0x0/0x183 @ 1
> [ 0.121985] Time: 11:05:10 Date: 08/09/09
> [ 0.122072] initcall early_resume_init+0x0/0x183 returned 0 after 976 usecs
> [ 0.122164] calling cpufreq_core_init+0x0/0x59 @ 1
> [ 0.122253] initcall cpufreq_core_init+0x0/0x59 returned 0 after 0 usecs
> [ 0.122345] calling cpuidle_init+0x0/0x32 @ 1
> [ 0.122437] initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs
> [ 0.122529] calling sock_init+0x0/0x51 @ 1
> [ 0.122662] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
> [ 0.122754] calling net_inuse_init+0x0/0x1f @ 1
> [ 0.122845] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs
> [ 0.122937] calling netpoll_init+0x0/0x11 @ 1
> [ 0.122985] initcall netpoll_init+0x0/0x11 returned 0 after 0 usecs
> [ 0.123077] calling netlink_proto_init+0x0/0x102 @ 1
> [ 0.123170] NET: Registered protocol family 16
> [ 0.123269] initcall netlink_proto_init+0x0/0x102 returned 0 after 0 usecs
> [ 0.123362] calling bdi_class_init+0x0/0x35 @ 1
> [ 0.123464] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs
> [ 0.123464] calling kobject_uevent_init+0x0/0x4e @ 1
> [ 0.123464] initcall kobject_uevent_init+0x0/0x4e returned 0 after 0 usecs
> [ 0.123464] calling pcibus_class_init+0x0/0x14 @ 1
> [ 0.123464] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
> [ 0.123992] calling pci_driver_init+0x0/0xf @ 1
> [ 0.124091] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
> [ 0.124091] calling backlight_class_init+0x0/0x4d @ 1
> [ 0.124182] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs
> [ 0.124182] calling video_output_class_init+0x0/0x14 @ 1
> [ 0.124182] initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
> [ 0.124182] calling tty_class_init+0x0/0x28 @ 1
> [ 0.124212] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs
> [ 0.124987] calling vtconsole_class_init+0x0/0xa1 @ 1
> [ 0.125087] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
> [ 0.125087] calling i2c_init+0x0/0x54 @ 1
> [ 0.125177] initcall i2c_init+0x0/0x54 returned 0 after 0 usecs
> [ 0.125177] calling amd_postcore_init+0x0/0x66 @ 1
> [ 0.125177] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs
> [ 0.125260] calling arch_kdebugfs_init+0x0/0x261 @ 1
> [ 0.125361] initcall arch_kdebugfs_init+0x0/0x261 returned 0 after 0 usecs
> [ 0.125986] calling init_pit_clocksource+0x0/0x94 @ 1
> [ 0.126077] initcall init_pit_clocksource+0x0/0x94 returned 0 after 0 usecs
> [ 0.126170] calling mtrr_if_init+0x0/0x44 @ 1
> [ 0.126261] initcall mtrr_if_init+0x0/0x44 returned 0 after 0 usecs
> [ 0.126353] calling ffh_cstate_init+0x0/0x27 @ 1
> [ 0.126442] initcall ffh_cstate_init+0x0/0x27 returned 0 after 0 usecs
> [ 0.126535] calling kdump_buf_page_init+0x0/0x54 @ 1
> [ 0.126626] initcall kdump_buf_page_init+0x0/0x54 returned 0 after 0 usecs
> [ 0.126719] calling acpi_pci_init+0x0/0x4c @ 1
> [ 0.126807] ACPI: bus type pci registered
> [ 0.126895] initcall acpi_pci_init+0x0/0x4c returned 0 after 0 usecs
> [ 0.126983] calling dmi_id_init+0x0/0x28f @ 1
> [ 0.127083] initcall dmi_id_init+0x0/0x28f returned 0 after 0 usecs
> [ 0.127083] calling pci_arch_init+0x0/0x53 @ 1
> [ 0.127190] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
> [ 0.127283] PCI: MCFG area at f0000000 reserved in E820
> [ 0.127372] PCI: Using MMCONFIG for extended config space
> [ 0.127461] PCI: Using configuration type 1 for base access
> [ 0.127560] initcall pci_arch_init+0x0/0x53 returned 0 after 0 usecs
> [ 0.127653] calling topology_init+0x0/0x36 @ 1
> [ 0.128010] initcall topology_init+0x0/0x36 returned 0 after 976 usecs
> [ 0.128103] calling mtrr_init_finialize+0x0/0x35 @ 1
> [ 0.128193] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
> [ 0.128287] calling param_sysfs_init+0x0/0x1a6 @ 1
> [ 0.138109] initcall param_sysfs_init+0x0/0x1a6 returned 0 after 9764 usecs
> [ 0.138109] calling pm_sysrq_init+0x0/0x16 @ 1
> [ 0.138195] initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
> [ 0.138287] calling audit_watch_init+0x0/0x27 @ 1
> [ 0.138376] initcall audit_watch_init+0x0/0x27 returned 0 after 0 usecs
> [ 0.138469] calling default_bdi_init+0x0/0x2f @ 1
> [ 0.138584] initcall default_bdi_init+0x0/0x2f returned 0 after 0 usecs
> [ 0.138584] calling init_bio+0x0/0xc0 @ 1
> [ 0.139024] bio: create slab <bio-0> at 0
> [ 0.139118] initcall init_bio+0x0/0xc0 returned 0 after 0 usecs
> [ 0.139210] calling fsnotify_init+0x0/0xf @ 1
> [ 0.139300] initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
> [ 0.139392] calling fsnotify_notification_init+0x0/0x5b @ 1
> [ 0.139485] initcall fsnotify_notification_init+0x0/0x5b returned 0 after 0 usecs
> [ 0.139615] calling cryptomgr_init+0x0/0xf @ 1
> [ 0.139704] initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
> [ 0.139795] calling blk_settings_init+0x0/0x1d @ 1
> [ 0.139885] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
> [ 0.140016] calling blk_ioc_init+0x0/0x24 @ 1
> [ 0.140106] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
> [ 0.140198] calling blk_softirq_init+0x0/0x5b @ 1
> [ 0.140288] initcall blk_softirq_init+0x0/0x5b returned 0 after 0 usecs
> [ 0.140379] calling genhd_device_init+0x0/0x50 @ 1
> [ 0.140516] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
> [ 0.140516] calling pci_slot_init+0x0/0x3b @ 1
> [ 0.140516] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs
> [ 0.140516] calling fbmem_init+0x0/0x78 @ 1
> [ 0.140516] initcall fbmem_init+0x0/0x78 returned 0 after 0 usecs
> [ 0.141018] calling acpi_init+0x0/0x25e @ 1
> [ 0.142435] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.150150] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 0.156229] ACPI: Interpreter enabled
> [ 0.156318] ACPI: (supports S0 S3 S4 S5)
> [ 0.156596] ACPI: Using IOAPIC for interrupt routing
> [ 0.173122] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
> [ 0.173215] ACPI: EC: driver started in interrupt mode
> [ 0.173323] ACPI: Power Resource [PUBS] (on)
> [ 0.174221] initcall acpi_init+0x0/0x25e returned 0 after 32221 usecs
> [ 0.174314] calling dock_init+0x0/0x7d @ 1
> [ 0.177366] ACPI: ACPI Dock Station Driver: 3 docks/bays found
> [ 0.177460] initcall dock_init+0x0/0x7d returned 0 after 2929 usecs
> [ 0.177553] calling acpi_pci_root_init+0x0/0x25 @ 1
> [ 0.177668] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.177785] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff]
> [ 0.177979] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
> [ 0.178072] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
> [ 0.178166] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff]
> [ 0.178296] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff]
> [ 0.178500] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff]
> [ 0.178650] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.178743] pci 0000:00:1b.0: PME# disabled
> [ 0.178913] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.178978] pci 0000:00:1c.0: PME# disabled
> [ 0.179149] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.179243] pci 0000:00:1c.1: PME# disabled
> [ 0.179414] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.179508] pci 0000:00:1c.2: PME# disabled
> [ 0.179678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.179771] pci 0000:00:1c.3: PME# disabled
> [ 0.179919] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
> [ 0.180039] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
> [ 0.180191] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
> [ 0.180342] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
> [ 0.180498] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff]
> [ 0.180649] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.180744] pci 0000:00:1d.7: PME# disabled
> [ 0.181077] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> [ 0.181209] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
> [ 0.181303] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
> [ 0.181435] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
> [ 0.181567] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
> [ 0.181748] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> [ 0.181843] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> [ 0.181939] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> [ 0.181980] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
> [ 0.182075] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
> [ 0.182227] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
> [ 0.182323] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
> [ 0.182419] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
> [ 0.182514] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
> [ 0.182610] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
> [ 0.182705] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff]
> [ 0.182833] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.182977] pci 0000:00:1f.2: PME# disabled
> [ 0.183126] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
> [ 0.183388] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
> [ 0.183563] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f]
> [ 0.183819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.183977] pci 0000:02:00.0: PME# disabled
> [ 0.184201] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
> [ 0.184295] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
> [ 0.184575] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
> [ 0.184946] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.185025] pci 0000:03:00.0: PME# disabled
> [ 0.185254] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
> [ 0.185348] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
> [ 0.185446] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
> [ 0.185596] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
> [ 0.185690] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
> [ 0.185789] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
> [ 0.186016] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
> [ 0.186109] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
> [ 0.186206] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
> [ 0.186352] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
> [ 0.186471] pci 0000:15:00.0: supports D1 D2
> [ 0.186558] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.186653] pci 0000:15:00.0: PME# disabled
> [ 0.186808] pci 0000:00:1e.0: transparent bridge
> [ 0.186898] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
> [ 0.186980] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
> [ 0.187845] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
> [ 0.188012] pci_bus 0000:00: on NUMA node 0
> [ 0.188103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.188345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
> [ 0.188515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
> [ 0.188683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
> [ 0.188857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
> [ 0.189037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> [ 0.194071] initcall acpi_pci_root_init+0x0/0x25 returned 0 after 16599 usecs
> [ 0.194071] calling acpi_pci_link_init+0x0/0x3f @ 1
> [ 0.194320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.195402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.196167] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.196895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.197608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.198349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.199103] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.199834] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
> [ 0.200436] initcall acpi_pci_link_init+0x0/0x3f returned 0 after 5858 usecs
> [ 0.200436] calling pnp_init+0x0/0xf @ 1
> [ 0.200436] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
> [ 0.200436] calling misc_init+0x0/0x92 @ 1
> [ 0.200436] initcall misc_init+0x0/0x92 returned 0 after 0 usecs
> [ 0.200979] calling cn_init+0x0/0xcb @ 1
> [ 0.201078] initcall cn_init+0x0/0xcb returned 0 after 0 usecs
> [ 0.201170] calling init_scsi+0x0/0x84 @ 1
> [ 0.201338] SCSI subsystem initialized
> [ 0.201338] initcall init_scsi+0x0/0x84 returned 0 after 0 usecs
> [ 0.201338] calling ata_init+0x0/0x29d @ 1
> [ 0.201338] libata version 3.00 loaded.
> [ 0.201338] initcall ata_init+0x0/0x29d returned 0 after 0 usecs
> [ 0.201975] calling phy_init+0x0/0x29 @ 1
> [ 0.202074] initcall phy_init+0x0/0x29 returned 0 after 0 usecs
> [ 0.202074] calling init_pcmcia_cs+0x0/0x1e @ 1
> [ 0.202163] initcall init_pcmcia_cs+0x0/0x1e returned 0 after 0 usecs
> [ 0.202163] calling usb_init+0x0/0x177 @ 1
> [ 0.202177] usbcore: registered new interface driver usbfs
> [ 0.202177] usbcore: registered new interface driver hub
> [ 0.203006] usbcore: registered new device driver usb
> [ 0.203063] initcall usb_init+0x0/0x177 returned 0 after 976 usecs
> [ 0.203155] calling serio_init+0x0/0x82 @ 1
> [ 0.203252] initcall serio_init+0x0/0x82 returned 0 after 0 usecs
> [ 0.203252] calling input_init+0x0/0xfb @ 1
> [ 0.203252] initcall input_init+0x0/0xfb returned 0 after 0 usecs
> [ 0.203252] calling rtc_init+0x0/0x5e @ 1
> [ 0.203252] initcall rtc_init+0x0/0x5e returned 0 after 0 usecs
> [ 0.203973] calling power_supply_class_init+0x0/0x2b @ 1
> [ 0.204074] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs
> [ 0.204101] calling hwmon_init+0x0/0xe9 @ 1
> [ 0.204202] initcall hwmon_init+0x0/0xe9 returned 0 after 0 usecs
> [ 0.204202] calling thermal_init+0x0/0x32 @ 1
> [ 0.204202] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs
> [ 0.204202] calling md_init+0x0/0xb5 @ 1
> [ 0.204202] initcall md_init+0x0/0xb5 returned 0 after 0 usecs
> [ 0.204252] calling leds_init+0x0/0x32 @ 1
> [ 0.204983] initcall leds_init+0x0/0x32 returned 0 after 0 usecs
> [ 0.205065] calling pci_subsys_init+0x0/0xdf @ 1
> [ 0.205153] PCI: Using ACPI for IRQ routing
> [ 0.205553] initcall pci_subsys_init+0x0/0xdf returned 0 after 0 usecs
> [ 0.205646] calling proto_init+0x0/0xf @ 1
> [ 0.205736] initcall proto_init+0x0/0xf returned 0 after 0 usecs
> [ 0.205827] calling net_dev_init+0x0/0x142 @ 1
> [ 0.206028] initcall net_dev_init+0x0/0x142 returned 0 after 0 usecs
> [ 0.206075] calling neigh_init+0x0/0x66 @ 1
> [ 0.206164] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
> [ 0.206256] calling fib_rules_init+0x0/0x99 @ 1
> [ 0.206346] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
> [ 0.206439] calling pktsched_init+0x0/0xa9 @ 1
> [ 0.206530] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs
> [ 0.206622] calling tc_filter_init+0x0/0x43 @ 1
> [ 0.206712] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
> [ 0.206804] calling tc_action_init+0x0/0x43 @ 1
> [ 0.206972] initcall tc_action_init+0x0/0x43 returned 0 after 0 usecs
> [ 0.207065] calling genl_init+0x0/0xb0 @ 1
> [ 0.208976] initcall genl_init+0x0/0xb0 returned 0 after 1952 usecs
> [ 0.209068] calling cipso_v4_init+0x0/0x52 @ 1
> [ 0.209159] initcall cipso_v4_init+0x0/0x52 returned 0 after 0 usecs
> [ 0.209250] calling wireless_nlevent_init+0x0/0x2f @ 1
> [ 0.209341] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs
> [ 0.209436] calling cfg80211_init+0x0/0x64 @ 1
> [ 0.219994] cfg80211: Using static regulatory domain info
> [ 0.220082] cfg80211: Regulatory domain: US
> [ 0.220169] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 0.220298] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
> [ 0.220391] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.220485] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.220577] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.220669] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
> [ 0.220762] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
> [ 0.220858] cfg80211: Calling CRDA for country: US
> [ 0.220985] initcall cfg80211_init+0x0/0x64 returned 0 after 11716 usecs
> [ 0.221068] calling ieee80211_init+0x0/0xa @ 1
> [ 0.221158] initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs
> [ 0.221250] calling netlbl_init+0x0/0x6d @ 1
> [ 0.221336] NetLabel: Initializing
> [ 0.221421] NetLabel: domain hash size = 128
> [ 0.221508] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.221610] NetLabel: unlabeled traffic allowed by default
> [ 0.221702] initcall netlbl_init+0x0/0x6d returned 0 after 0 usecs
> [ 0.221793] calling rfkill_init+0x0/0x75 @ 1
> [ 0.222006] initcall rfkill_init+0x0/0x75 returned 0 after 976 usecs
> [ 0.222087] calling sysctl_init+0x0/0x3b @ 1
> [ 0.222175] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
> [ 0.222267] calling pci_iommu_init+0x0/0xc @ 1
> [ 0.222356] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs
> [ 0.222449] calling print_all_ICs+0x0/0x441 @ 1
> [ 0.222538]
> [ 0.222539] printing PIC contents
> [ 0.222707] ... PIC IMR: ffff
> [ 0.222795] ... PIC IRR: 0800
> [ 0.222888] ... PIC ISR: 0000
> [ 0.222972] ... PIC ELCR: 0800
> [ 0.223058] printing local APIC contents on CPU#0/0:
> [ 0.223146] ... APIC ID: 00000000 (0)
> [ 0.223233] ... APIC VERSION: 00050014
> [ 0.223318] ... APIC TASKPRI: 00000000 (00)
> [ 0.223406] ... APIC PROCPRI: 00000000
> [ 0.223491] ... APIC LDR: 01000000
> [ 0.223576] ... APIC DFR: ffffffff
> [ 0.223661] ... APIC SPIV: 000001ff
> [ 0.223747] ... APIC ISR field:
> [ 0.223832] 0000000000000000000000000000000000000000000000000000000000000000
> [ 0.223965] ... APIC TMR field:
> [ 0.223965] 0000000002000000000000000000000000000000000000000000000000000000
> [ 0.223965] ... APIC IRR field:
> [ 0.223965] 0000000000000000000000000000000000000000000000000000000000008000
> [ 0.223965] ... APIC ESR: 00000000
> [ 0.223965] ... APIC ICR: 000008fb
> [ 0.223965] ... APIC ICR2: 02000000
> [ 0.223965] ... APIC LVTT: 000200ef
> [ 0.223965] ... APIC LVTPC: 00010000
> [ 0.223965] ... APIC LVT0: 00010700
> [ 0.223965] ... APIC LVT1: 00000400
> [ 0.223965] ... APIC LVTERR: 000000fe
> [ 0.223965] ... APIC TMICT: 00002896
> [ 0.223965] ... APIC TMCCT: 000021a7
> [ 0.223965] ... APIC TDCR: 00000003
> [ 0.223965]
> [ 0.223577] printing local APIC contents on CPU#1/1:
> [ 0.223668] ... APIC ID: 01000000 (1)
> [ 0.223754] ... APIC VERSION: 00050014
> [ 0.223840] ... APIC TASKPRI: 00000000 (00)
> [ 0.223928] ... APIC PROCPRI: 00000000
> [ 0.223965] ... APIC LDR: 02000000
> [ 0.223965] ... APIC DFR: ffffffff
> [ 0.223965] ... APIC SPIV: 000001ff
> [ 0.223965] ... APIC ISR field:
> [ 0.223965] 0000000000000000000000000000000000000000000000000000000000000000
> [ 0.223965] ... APIC TMR field:
> [ 0.223965] 0000000000000000000000000000000000000000000000000000000000000000
> [ 0.223965] ... APIC IRR field:
> [ 0.223965] 0000000000000000000000000000000000000000000000000000000000008000
> [ 0.223965] ... APIC ESR: 00000000
> [ 0.223965] ... APIC ICR: 000008fd
> [ 0.223965] ... APIC ICR2: 01000000
> [ 0.223965] ... APIC LVTT: 000200ef
> [ 0.223965] ... APIC LVTPC: 00010000
> [ 0.223965] ... APIC LVT0: 00010700
> [ 0.223965] ... APIC LVT1: 00010400
> [ 0.223965] ... APIC LVTERR: 000000fe
> [ 0.223965] ... APIC TMICT: 00002896
> [ 0.223965] ... APIC TMCCT: 00000f04
> [ 0.223965] ... APIC TDCR: 00000003
> [ 0.223965]
> [ 0.227664] number of MP IRQ sources: 15.
> [ 0.227752] number of IO-APIC #1 registers: 24.
> [ 0.227839] testing the IO APIC.......................
> [ 0.227933]
> [ 0.227967] IO APIC #1......
> [ 0.228050] .... register #00: 02000000
> [ 0.228136] ....... : physical APIC id: 02
> [ 0.228223] ....... : Delivery Type: 0
> [ 0.228309] ....... : LTS : 0
> [ 0.228396] .... register #01: 00170020
> [ 0.228482] ....... : max redirection entries: 0017
> [ 0.228570] ....... : PRQ implemented: 0
> [ 0.228656] ....... : IO APIC version: 0020
> [ 0.228743] .... IRQ redirection table:
> [ 0.228966] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> [ 0.229059] 00 000 1 0 0 0 0 0 0 00
> [ 0.229195] 01 003 0 0 0 0 0 1 1 31
> [ 0.229970] 02 003 0 0 0 0 0 1 1 30
> [ 0.230105] 03 003 0 0 0 0 0 1 1 33
> [ 0.230241] 04 003 0 0 0 0 0 1 1 34
> [ 0.230377] 05 003 0 0 0 0 0 1 1 35
> [ 0.230514] 06 003 0 0 0 0 0 1 1 36
> [ 0.230650] 07 003 0 0 0 0 0 1 1 37
> [ 0.230787] 08 003 0 0 0 0 0 1 1 38
> [ 0.230967] 09 003 0 1 0 0 0 1 1 39
> [ 0.231103] 0a 003 0 0 0 0 0 1 1 3A
> [ 0.231239] 0b 003 0 0 0 0 0 1 1 3B
> [ 0.231375] 0c 003 0 0 0 0 0 1 1 3C
> [ 0.231511] 0d 003 0 0 0 0 0 1 1 3D
> [ 0.231646] 0e 003 0 0 0 0 0 1 1 3E
> [ 0.231782] 0f 003 0 0 0 0 0 1 1 3F
> [ 0.231918] 10 000 1 0 0 0 0 0 0 00
> [ 0.232055] 11 000 1 0 0 0 0 0 0 00
> [ 0.232192] 12 000 1 0 0 0 0 0 0 00
> [ 0.232329] 13 000 1 0 0 0 0 0 0 00
> [ 0.232465] 14 000 1 0 0 0 0 0 0 00
> [ 0.232602] 15 000 1 0 0 0 0 0 0 00
> [ 0.232737] 16 000 1 0 0 0 0 0 0 00
> [ 0.232873] 17 000 1 0 0 0 0 0 0 00
> [ 0.232966] IRQ to pin mappings:
> [ 0.233051] IRQ0 -> 0:2
> [ 0.233219] IRQ1 -> 0:1
> [ 0.233389] IRQ3 -> 0:3
> [ 0.233559] IRQ4 -> 0:4
> [ 0.233729] IRQ5 -> 0:5
> [ 0.233897] IRQ6 -> 0:6
> [ 0.234088] IRQ7 -> 0:7
> [ 0.234258] IRQ8 -> 0:8
> [ 0.234426] IRQ9 -> 0:9
> [ 0.234596] IRQ10 -> 0:10
> [ 0.234765] IRQ11 -> 0:11
> [ 0.234933] IRQ12 -> 0:12
> [ 0.235087] IRQ13 -> 0:13
> [ 0.235256] IRQ14 -> 0:14
> [ 0.235426] IRQ15 -> 0:15
> [ 0.235599] .................................... done.
> [ 0.235690] initcall print_all_ICs+0x0/0x441 returned 0 after 12693 usecs
> [ 0.235783] calling hpet_late_init+0x0/0x183 @ 1
> [ 0.235877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.236179] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [ 0.238971] initcall hpet_late_init+0x0/0x183 returned 0 after 3905 usecs
> [ 0.239062] calling clocksource_done_booting+0x0/0x11 @ 1
> [ 0.239968] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs
> [ 0.240097] calling rb_init_debugfs+0x0/0x27 @ 1
> [ 0.240191] initcall rb_init_debugfs+0x0/0x27 returned 0 after 0 usecs
> [ 0.240283] calling tracer_init_debugfs+0x0/0x26b @ 1
> [ 0.240459] initcall tracer_init_debugfs+0x0/0x26b returned 0 after 0 usecs
> [ 0.240553] calling init_trace_printk_function_export+0x0/0x2a @ 1
> [ 0.240647] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 0 usecs
> [ 0.240776] calling event_trace_init+0x0/0x17e @ 1
> [ 0.240979] Switched to high resolution mode on CPU 0
> [ 0.241783] Switched to high resolution mode on CPU 1
> [ 0.242167] initcall event_trace_init+0x0/0x17e returned 0 after 2148 usecs
> [ 0.242265] calling init_pipe_fs+0x0/0x41 @ 1
> [ 0.242366] initcall init_pipe_fs+0x0/0x41 returned 0 after 11 usecs
> [ 0.242459] calling eventpoll_init+0x0/0xac @ 1
> [ 0.242554] initcall eventpoll_init+0x0/0xac returned 0 after 5 usecs
> [ 0.242647] calling anon_inode_init+0x0/0xed @ 1
> [ 0.242744] initcall anon_inode_init+0x0/0xed returned 0 after 6 usecs
> [ 0.242836] calling blk_scsi_ioctl_init+0x0/0x288 @ 1
> [ 0.242929] initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 1 usecs
> [ 0.243031] calling acpi_event_init+0x0/0x6f @ 1
> [ 0.246021] initcall acpi_event_init+0x0/0x6f returned 0 after 2830 usecs
> [ 0.246114] calling pnpacpi_init+0x0/0x7b @ 1
> [ 0.246202] pnp: PnP ACPI init
> [ 0.246298] ACPI: bus type pnp registered
> [ 0.248505] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
> [ 0.248733] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
> [ 0.248956] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
> [ 0.249185] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
> [ 0.250518] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
> [ 0.253081] pnp: PnP ACPI: found 11 devices
> [ 0.253168] ACPI: ACPI bus type pnp unregistered
> [ 0.253266] initcall pnpacpi_init+0x0/0x7b returned 0 after 6895 usecs
> [ 0.253359] calling pnp_system_init+0x0/0xf @ 1
> [ 0.253456] system 00:00: iomem range 0x0-0x9ffff could not be reserved
> [ 0.253548] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
> [ 0.253641] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
> [ 0.253735] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
> [ 0.253828] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
> [ 0.253921] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
> [ 0.254025] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
> [ 0.254118] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
> [ 0.254211] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
> [ 0.254313] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
> [ 0.254406] system 00:00: iomem range 0xec000-0xeffff could not be reserved
> [ 0.254499] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
> [ 0.254592] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
> [ 0.254723] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
> [ 0.254859] system 00:02: ioport range 0x164e-0x164f has been reserved
> [ 0.254952] system 00:02: ioport range 0x1000-0x107f has been reserved
> [ 0.255050] system 00:02: ioport range 0x1180-0x11bf has been reserved
> [ 0.255143] system 00:02: ioport range 0x800-0x80f has been reserved
> [ 0.255235] system 00:02: ioport range 0x15e0-0x15ef has been reserved
> [ 0.255334] system 00:02: ioport range 0x1600-0x165f could not be reserved
> [ 0.255428] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
> [ 0.255522] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
> [ 0.255616] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
> [ 0.255710] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
> [ 0.255804] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
> [ 0.255954] initcall pnp_system_init+0x0/0xf returned 0 after 2446 usecs
> [ 0.256056] calling chr_dev_init+0x0/0x8d @ 1
> [ 0.256797] initcall chr_dev_init+0x0/0x8d returned 0 after 636 usecs
> [ 0.256891] calling firmware_class_init+0x0/0x61 @ 1
> [ 0.257046] initcall firmware_class_init+0x0/0x61 returned 0 after 62 usecs
> [ 0.257140] calling init_pcmcia_bus+0x0/0x62 @ 1
> [ 0.257308] initcall init_pcmcia_bus+0x0/0x62 returned 0 after 75 usecs
> [ 0.257402] calling cpufreq_gov_performance_init+0x0/0xf @ 1
> [ 0.257497] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 1 usecs
> [ 0.257625] calling cpufreq_gov_userspace_init+0x0/0xf @ 1
> [ 0.257719] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs
> [ 0.257849] calling init_acpi_pm_clocksource+0x0/0x1b5 @ 1
> [ 0.292492] initcall init_acpi_pm_clocksource+0x0/0x1b5 returned 0 after 33741 usecs
> [ 0.292622] calling pcibios_assign_resources+0x0/0x66 @ 1
> [ 0.292785] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> [ 0.292876] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
> [ 0.292970] pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff
> [ 0.293076] pci 0000:00:1c.0: PREFETCH window: disabled
> [ 0.293169] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
> [ 0.293267] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
> [ 0.293360] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
> [ 0.293453] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
> [ 0.293588] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
> [ 0.293679] pci 0000:00:1c.2: IO window: 0x5000-0x6fff
> [ 0.293773] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
> [ 0.293866] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
> [ 0.294009] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
> [ 0.294100] pci 0000:00:1c.3: IO window: 0x7000-0x8fff
> [ 0.294194] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
> [ 0.294293] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
> [ 0.294431] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
> [ 0.294524] pci 0000:15:00.0: IO window: 0x009000-0x0090ff
> [ 0.294618] pci 0000:15:00.0: IO window: 0x009400-0x0094ff
> [ 0.294712] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
> [ 0.294807] pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff
> [ 0.294902] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
> [ 0.294994] pci 0000:00:1e.0: IO window: 0x9000-0xcfff
> [ 0.295094] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
> [ 0.295188] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
> [ 0.295338] alloc irq_desc for 20 on node -1
> [ 0.295425] alloc kstat_irqs on node -1
> [ 0.295514] IOAPIC[0]: Set routing entry (1-20 -> 0x49 -> IRQ 20 Mode:1 Active:1)
> [ 0.295645] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 0.295741] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.295836] alloc irq_desc for 21 on node -1
> [ 0.295923] alloc kstat_irqs on node -1
> [ 0.296019] IOAPIC[0]: Set routing entry (1-21 -> 0x51 -> IRQ 21 Mode:1 Active:1)
> [ 0.296149] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 0.296243] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.296347] alloc irq_desc for 22 on node -1
> [ 0.296435] alloc kstat_irqs on node -1
> [ 0.296522] IOAPIC[0]: Set routing entry (1-22 -> 0x59 -> IRQ 22 Mode:1 Active:1)
> [ 0.296651] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> [ 0.296747] pci 0000:00:1c.2: setting latency timer to 64
> [ 0.296843] alloc irq_desc for 23 on node -1
> [ 0.297013] alloc kstat_irqs on node -1
> [ 0.297803] IOAPIC[0]: Set routing entry (1-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
> [ 0.297933] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
> [ 0.298033] pci 0000:00:1c.3: setting latency timer to 64
> [ 0.298126] pci 0000:00:1e.0: enabling device (0005 -> 0007)
> [ 0.298219] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.298326] alloc irq_desc for 16 on node -1
> [ 0.298413] alloc kstat_irqs on node -1
> [ 0.298501] IOAPIC[0]: Set routing entry (1-16 -> 0x69 -> IRQ 16 Mode:1 Active:1)
> [ 0.298631] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.298729] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 0.298819] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
> [ 0.298910] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
> [ 0.299000] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
> [ 0.299099] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff]
> [ 0.299189] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
> [ 0.299287] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff]
> [ 0.299380] pci_bus 0000:04: resource 0 io: [0x5000-0x6fff]
> [ 0.299471] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
> [ 0.299563] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff]
> [ 0.299655] pci_bus 0000:0c: resource 0 io: [0x7000-0x8fff]
> [ 0.299745] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
> [ 0.299837] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff]
> [ 0.299929] pci_bus 0000:15: resource 0 io: [0x9000-0xcfff]
> [ 0.300026] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
> [ 0.300117] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff]
> [ 0.300210] pci_bus 0000:15: resource 3 io: [0x00-0xffff]
> [ 0.300309] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
> [ 0.300400] pci_bus 0000:16: resource 0 io: [0x9000-0x90ff]
> [ 0.300491] pci_bus 0000:16: resource 1 io: [0x9400-0x94ff]
> [ 0.300581] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff]
> [ 0.300673] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
> [ 0.300767] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 7864 usecs
> [ 0.300897] calling sysctl_core_init+0x0/0x2d @ 1
> [ 0.301023] initcall sysctl_core_init+0x0/0x2d returned 0 after 33 usecs
> [ 0.301115] calling inet_init+0x0/0x1c3 @ 1
> [ 0.301213] NET: Registered protocol family 2
> [ 0.301404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.301831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.302659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.303110] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.303202] TCP reno registered
> [ 0.303404] initcall inet_init+0x0/0x1c3 returned 0 after 2142 usecs
> [ 0.303499] calling af_unix_init+0x0/0x47 @ 1
> [ 0.303589] NET: Registered protocol family 1
> [ 0.303688] initcall af_unix_init+0x0/0x47 returned 0 after 97 usecs
> [ 0.303781] calling populate_rootfs+0x0/0x1ea @ 1
> [ 0.303938] initcall populate_rootfs+0x0/0x1ea returned 0 after 63 usecs
> [ 0.304045] calling i8259A_init_sysfs+0x0/0x1d @ 1
> [ 0.304311] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 169 usecs
> [ 0.304404] calling sbf_init+0x0/0xc0 @ 1
> [ 0.304495] Simple Boot Flag at 0x35 set to 0x1
> [ 0.304589] initcall sbf_init+0x0/0xc0 returned 0 after 93 usecs
> [ 0.304681] calling i8237A_init_sysfs+0x0/0x1d @ 1
> [ 0.304886] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 111 usecs
> [ 0.304980] calling add_rtc_cmos+0x0/0x7e @ 1
> [ 0.305095] initcall add_rtc_cmos+0x0/0x7e returned 0 after 5 usecs
> [ 0.305188] calling cache_sysfs_init+0x0/0x4b @ 1
> [ 0.305753] initcall cache_sysfs_init+0x0/0x4b returned 0 after 457 usecs
> [ 0.305847] calling mce_init_device+0x0/0xc1 @ 1
> [ 0.306201] initcall mce_init_device+0x0/0xc1 returned 0 after 257 usecs
> [ 0.306305] calling threshold_init_device+0x0/0x3a @ 1
> [ 0.306398] initcall threshold_init_device+0x0/0x3a returned 0 after 1 usecs
> [ 0.306492] calling thermal_throttle_init_device+0x0/0x77 @ 1
> [ 0.306590] initcall thermal_throttle_init_device+0x0/0x77 returned 0 after 5 usecs
> [ 0.306720] calling msr_init+0x0/0xda @ 1
> [ 0.307020] initcall msr_init+0x0/0xda returned 0 after 189 usecs
> [ 0.307111] calling cpuid_init+0x0/0xda @ 1
> [ 0.307389] initcall cpuid_init+0x0/0xda returned 0 after 181 usecs
> [ 0.307482] calling ioapic_init_sysfs+0x0/0x84 @ 1
> [ 0.307679] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 104 usecs
> [ 0.307772] calling add_pcspkr+0x0/0x24 @ 1
> [ 0.307929] initcall add_pcspkr+0x0/0x24 returned 0 after 65 usecs
> [ 0.308034] calling microcode_init+0x0/0xf2 @ 1
> [ 0.308192] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
> [ 0.308297] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
> [ 0.308450] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.308583] initcall microcode_init+0x0/0xf2 returned 0 after 447 usecs
> [ 0.308678] calling start_periodic_check_for_corruption+0x0/0x32 @ 1
> [ 0.308770] Scanning for low memory corruption every 60 seconds
> [ 0.308864] initcall start_periodic_check_for_corruption+0x0/0x32 returned 0 after 91 usecs
> [ 0.308996] calling aes_init+0x0/0xf @ 1
> [ 0.309202] initcall aes_init+0x0/0xf returned 0 after 90 usecs
> [ 0.309304] calling proc_schedstat_init+0x0/0x1c @ 1
> [ 0.309401] initcall proc_schedstat_init+0x0/0x1c returned 0 after 6 usecs
> [ 0.309495] calling proc_execdomains_init+0x0/0x1c @ 1
> [ 0.309588] initcall proc_execdomains_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.309681] calling ioresources_init+0x0/0x2d @ 1
> [ 0.309775] initcall ioresources_init+0x0/0x2d returned 0 after 3 usecs
> [ 0.309867] calling uid_cache_init+0x0/0x5b @ 1
> [ 0.309963] initcall uid_cache_init+0x0/0x5b returned 0 after 5 usecs
> [ 0.310078] calling init_posix_timers+0x0/0xb3 @ 1
> [ 0.310174] initcall init_posix_timers+0x0/0xb3 returned 0 after 5 usecs
> [ 0.310274] calling init_posix_cpu_timers+0x0/0xba @ 1
> [ 0.310367] initcall init_posix_cpu_timers+0x0/0xba returned 0 after 1 usecs
> [ 0.310460] calling nsproxy_cache_init+0x0/0x27 @ 1
> [ 0.310553] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 1 usecs
> [ 0.310647] calling create_proc_profile+0x0/0x16f @ 1
> [ 0.310749] initcall create_proc_profile+0x0/0x16f returned 0 after 9 usecs
> [ 0.310843] calling timekeeping_init_device+0x0/0x1d @ 1
> [ 0.311038] initcall timekeeping_init_device+0x0/0x1d returned 0 after 100 usecs
> [ 0.311170] calling init_clocksource_sysfs+0x0/0x43 @ 1
> [ 0.311377] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 106 usecs
> [ 0.311508] calling init_timer_list_procfs+0x0/0x27 @ 1
> [ 0.311602] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 2 usecs
> [ 0.311695] calling init_tstats_procfs+0x0/0x27 @ 1
> [ 0.311789] initcall init_tstats_procfs+0x0/0x27 returned 0 after 2 usecs
> [ 0.311881] calling futex_init+0x0/0x65 @ 1
> [ 0.311979] initcall futex_init+0x0/0x65 returned 0 after 8 usecs
> [ 0.312086] calling proc_dma_init+0x0/0x1c @ 1
> [ 0.312179] initcall proc_dma_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.312277] calling proc_modules_init+0x0/0x1c @ 1
> [ 0.312370] initcall proc_modules_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.312462] calling kallsyms_init+0x0/0x1f @ 1
> [ 0.312553] initcall kallsyms_init+0x0/0x1f returned 0 after 2 usecs
> [ 0.312646] calling snapshot_device_init+0x0/0xf @ 1
> [ 0.312801] initcall snapshot_device_init+0x0/0xf returned 0 after 61 usecs
> [ 0.312895] calling crash_save_vmcoreinfo_init+0x0/0x348 @ 1
> [ 0.313023] initcall crash_save_vmcoreinfo_init+0x0/0x348 returned 0 after 34 usecs
> [ 0.313153] calling crash_notes_memory_init+0x0/0x31 @ 1
> [ 0.313247] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 3 usecs
> [ 0.313384] calling pid_namespaces_init+0x0/0x27 @ 1
> [ 0.313477] initcall pid_namespaces_init+0x0/0x27 returned 0 after 2 usecs
> [ 0.313570] calling audit_init+0x0/0xd2 @ 1
> [ 0.313657] audit: initializing netlink socket (disabled)
> [ 0.313756] type=2000 audit(1249815910.313:1): initialized
> [ 0.313848] initcall audit_init+0x0/0xd2 returned 0 after 186 usecs
> [ 0.313941] calling audit_tree_init+0x0/0x3b @ 1
> [ 0.314048] initcall audit_tree_init+0x0/0x3b returned 0 after 3 usecs
> [ 0.314140] calling init_kprobes+0x0/0x11c @ 1
> [ 0.324102] initcall init_kprobes+0x0/0x11c returned 0 after 9640 usecs
> [ 0.324195] calling utsname_sysctl_init+0x0/0x11 @ 1
> [ 0.324314] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 22 usecs
> [ 0.324409] calling init_markers+0x0/0xf @ 1
> [ 0.324499] initcall init_markers+0x0/0xf returned 0 after 1 usecs
> [ 0.324591] calling init_tracepoints+0x0/0xf @ 1
> [ 0.324683] initcall init_tracepoints+0x0/0xf returned 0 after 1 usecs
> [ 0.324774] calling init_events+0x0/0x5a @ 1
> [ 0.324867] initcall init_events+0x0/0x5a returned 0 after 2 usecs
> [ 0.324958] calling init_sched_switch_trace+0x0/0xf @ 1
> [ 0.325059] initcall init_sched_switch_trace+0x0/0xf returned 0 after 2 usecs
> [ 0.325152] calling init_blk_tracer+0x0/0x4b @ 1
> [ 0.325243] initcall init_blk_tracer+0x0/0x4b returned 0 after 1 usecs
> [ 0.325343] calling perf_counter_sysfs_init+0x0/0x14 @ 1
> [ 0.325439] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 4 usecs
> [ 0.325569] calling init_per_zone_wmark_min+0x0/0x59 @ 1
> [ 0.325746] initcall init_per_zone_wmark_min+0x0/0x59 returned 0 after 83 usecs
> [ 0.325877] calling pdflush_init+0x0/0x20 @ 1
> [ 0.326037] initcall pdflush_init+0x0/0x20 returned 0 after 68 usecs
> [ 0.326131] calling kswapd_init+0x0/0x1d @ 1
> [ 0.326255] initcall kswapd_init+0x0/0x1d returned 0 after 33 usecs
> [ 0.326350] calling init_tmpfs+0x0/0xb9 @ 1
> [ 0.326466] initcall init_tmpfs+0x0/0xb9 returned 0 after 26 usecs
> [ 0.326558] calling setup_vmstat+0x0/0x9a @ 1
> [ 0.326658] initcall setup_vmstat+0x0/0x9a returned 0 after 9 usecs
> [ 0.326751] calling mm_sysfs_init+0x0/0x22 @ 1
> [ 0.326844] initcall mm_sysfs_init+0x0/0x22 returned 0 after 4 usecs
> [ 0.326936] calling proc_vmalloc_init+0x0/0x1f @ 1
> [ 0.327037] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 2 usecs
> [ 0.327131] calling init_emergency_pool+0x0/0x57 @ 1
> [ 0.327243] highmem bounce pool size: 64 pages
> [ 0.327340] initcall init_emergency_pool+0x0/0x57 returned 0 after 115 usecs
> [ 0.327433] calling procswaps_init+0x0/0x1c @ 1
> [ 0.327527] initcall procswaps_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.327619] calling hugetlb_init+0x0/0x230 @ 1
> [ 0.327709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 0.327811] initcall hugetlb_init+0x0/0x230 returned 0 after 99 usecs
> [ 0.328692] calling slab_proc_init+0x0/0x1f @ 1
> [ 0.328784] initcall slab_proc_init+0x0/0x1f returned 0 after 2 usecs
> [ 0.328876] calling slab_sysfs_init+0x0/0xb7 @ 1
> [ 0.333074] initcall slab_sysfs_init+0x0/0xb7 returned 0 after 4008 usecs
> [ 0.333169] calling fasync_init+0x0/0x24 @ 1
> [ 0.333268] initcall fasync_init+0x0/0x24 returned 0 after 6 usecs
> [ 0.333360] calling proc_filesystems_init+0x0/0x1c @ 1
> [ 0.333455] initcall proc_filesystems_init+0x0/0x1c returned 0 after 3 usecs
> [ 0.333548] calling dnotify_init+0x0/0x6f @ 1
> [ 0.333649] initcall dnotify_init+0x0/0x6f returned 0 after 10 usecs
> [ 0.333741] calling inotify_setup+0x0/0x11 @ 1
> [ 0.333833] initcall inotify_setup+0x0/0x11 returned 0 after 1 usecs
> [ 0.333925] calling inotify_user_setup+0x0/0x9e @ 1
> [ 0.334044] initcall inotify_user_setup+0x0/0x9e returned 0 after 20 usecs
> [ 0.334138] calling aio_setup+0x0/0x60 @ 1
> [ 0.334295] initcall aio_setup+0x0/0x60 returned 0 after 65 usecs
> [ 0.334389] calling proc_locks_init+0x0/0x1c @ 1
> [ 0.334483] initcall proc_locks_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.334575] calling init_mbcache+0x0/0x11 @ 1
> [ 0.334665] initcall init_mbcache+0x0/0x11 returned 0 after 1 usecs
> [ 0.334757] calling dquot_init+0x0/0xdd @ 1
> [ 0.334845] VFS: Disk quotas dquot_6.5.2
> [ 0.335056] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.335156] initcall dquot_init+0x0/0xdd returned 0 after 301 usecs
> [ 0.335249] calling init_v2_quota_format+0x0/0xf @ 1
> [ 0.335349] initcall init_v2_quota_format+0x0/0xf returned 0 after 1 usecs
> [ 0.335442] calling proc_cmdline_init+0x0/0x1c @ 1
> [ 0.335535] initcall proc_cmdline_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.335629] calling proc_cpuinfo_init+0x0/0x1c @ 1
> [ 0.335723] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.335815] calling proc_devices_init+0x0/0x1c @ 1
> [ 0.335909] initcall proc_devices_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336010] calling proc_interrupts_init+0x0/0x1c @ 1
> [ 0.336103] initcall proc_interrupts_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336197] calling proc_loadavg_init+0x0/0x1c @ 1
> [ 0.336297] initcall proc_loadavg_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336390] calling proc_meminfo_init+0x0/0x1c @ 1
> [ 0.336483] initcall proc_meminfo_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336576] calling proc_stat_init+0x0/0x1c @ 1
> [ 0.336668] initcall proc_stat_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336759] calling proc_uptime_init+0x0/0x1c @ 1
> [ 0.336851] initcall proc_uptime_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.336943] calling proc_version_init+0x0/0x1c @ 1
> [ 0.337060] initcall proc_version_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.337152] calling proc_softirqs_init+0x0/0x1c @ 1
> [ 0.337245] initcall proc_softirqs_init+0x0/0x1c returned 0 after 2 usecs
> [ 0.337347] calling proc_kcore_init+0x0/0x40 @ 1
> [ 0.337439] initcall proc_kcore_init+0x0/0x40 returned 0 after 2 usecs
> [ 0.337532] calling vmcore_init+0x0/0xa0b @ 1
> [ 0.337624] initcall vmcore_init+0x0/0xa0b returned 0 after 2 usecs
> [ 0.337716] calling proc_kmsg_init+0x0/0x1f @ 1
> [ 0.337808] initcall proc_kmsg_init+0x0/0x1f returned 0 after 2 usecs
> [ 0.337901] calling proc_page_init+0x0/0x33 @ 1
> [ 0.337995] initcall proc_page_init+0x0/0x33 returned 0 after 3 usecs
> [ 0.338093] calling init_devpts_fs+0x0/0x41 @ 1
> [ 0.338196] initcall init_devpts_fs+0x0/0x41 returned 0 after 12 usecs
> [ 0.338296] calling init_ext3_fs+0x0/0x5f @ 1
> [ 0.338545] initcall init_ext3_fs+0x0/0x5f returned 0 after 154 usecs
> [ 0.338636] calling journal_init+0x0/0x85 @ 1
> [ 0.338965] initcall journal_init+0x0/0x85 returned 0 after 232 usecs
> [ 0.339070] calling init_ramfs_fs+0x0/0xf @ 1
> [ 0.339161] initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs
> [ 0.339254] calling init_hugetlbfs_fs+0x0/0x84 @ 1
> [ 0.339441] initcall init_hugetlbfs_fs+0x0/0x84 returned 0 after 88 usecs
> [ 0.339535] calling init_fat_fs+0x0/0x46 @ 1
> [ 0.339774] initcall init_fat_fs+0x0/0x46 returned 0 after 145 usecs
> [ 0.339866] calling init_vfat_fs+0x0/0xf @ 1
> [ 0.339957] initcall init_vfat_fs+0x0/0xf returned 0 after 2 usecs
> [ 0.340057] calling init_msdos_fs+0x0/0xf @ 1
> [ 0.340148] initcall init_msdos_fs+0x0/0xf returned 0 after 2 usecs
> [ 0.340240] calling init_iso9660_fs+0x0/0x61 @ 1
> [ 0.340422] initcall init_iso9660_fs+0x0/0x61 returned 0 after 81 usecs
> [ 0.340515] calling init_nfs_fs+0x0/0xf9 @ 1
> [ 0.340839] initcall init_nfs_fs+0x0/0xf9 returned 0 after 228 usecs
> [ 0.340931] calling init_nlm+0x0/0x1c @ 1
> [ 0.341054] initcall init_nlm+0x0/0x1c returned 0 after 20 usecs
> [ 0.341146] calling init_nls_cp437+0x0/0xf @ 1
> [ 0.341238] initcall init_nls_cp437+0x0/0xf returned 0 after 2 usecs
> [ 0.341339] calling init_nls_ascii+0x0/0xf @ 1
> [ 0.341430] initcall init_nls_ascii+0x0/0xf returned 0 after 1 usecs
> [ 0.341523] calling init_nls_iso8859_1+0x0/0xf @ 1
> [ 0.341615] initcall init_nls_iso8859_1+0x0/0xf returned 0 after 1 usecs
> [ 0.341707] calling init_nls_utf8+0x0/0x1f @ 1
> [ 0.341798] initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs
> [ 0.341891] calling init_autofs4_fs+0x0/0x1e @ 1
> [ 0.342055] initcall init_autofs4_fs+0x0/0x1e returned 0 after 71 usecs
> [ 0.342148] calling ipc_init+0x0/0x20 @ 1
> [ 0.342239] msgmni has been set to 1725
> [ 0.342337] initcall ipc_init+0x0/0x20 returned 0 after 98 usecs
> [ 0.342430] calling ipc_sysctl_init+0x0/0x11 @ 1
> [ 0.342553] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 32 usecs
> [ 0.342647] calling init_mqueue_fs+0x0/0x9e @ 1
> [ 0.342845] initcall init_mqueue_fs+0x0/0x9e returned 0 after 104 usecs
> [ 0.342938] calling key_proc_init+0x0/0x48 @ 1
> [ 0.343041] initcall key_proc_init+0x0/0x48 returned 0 after 4 usecs
> [ 0.343134] calling selinux_nf_ip_init+0x0/0x54 @ 1
> [ 0.343222] SELinux: Registering netfilter hooks
> [ 0.343321] initcall selinux_nf_ip_init+0x0/0x54 returned 0 after 94 usecs
> [ 0.343414] calling init_sel_fs+0x0/0x5a @ 1
> [ 0.343585] initcall init_sel_fs+0x0/0x5a returned 0 after 76 usecs
> [ 0.343677] calling selnl_init+0x0/0x46 @ 1
> [ 0.343773] initcall selnl_init+0x0/0x46 returned 0 after 6 usecs
> [ 0.343864] calling sel_netif_init+0x0/0x57 @ 1
> [ 0.343957] initcall sel_netif_init+0x0/0x57 returned 0 after 3 usecs
> [ 0.344056] calling sel_netnode_init+0x0/0x68 @ 1
> [ 0.344149] initcall sel_netnode_init+0x0/0x68 returned 0 after 2 usecs
> [ 0.344241] calling sel_netport_init+0x0/0x68 @ 1
> [ 0.344340] initcall sel_netport_init+0x0/0x68 returned 0 after 2 usecs
> [ 0.344433] calling aurule_init+0x0/0x30 @ 1
> [ 0.344523] initcall aurule_init+0x0/0x30 returned 0 after 1 usecs
> [ 0.344615] calling crypto_wq_init+0x0/0x29 @ 1
> [ 0.344761] initcall crypto_wq_init+0x0/0x29 returned 0 after 54 usecs
> [ 0.344854] calling crypto_algapi_init+0x0/0xc @ 1
> [ 0.344947] initcall crypto_algapi_init+0x0/0xc returned 0 after 3 usecs
> [ 0.345048] calling chainiv_module_init+0x0/0xf @ 1
> [ 0.345141] initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.345234] calling eseqiv_module_init+0x0/0xf @ 1
> [ 0.345333] initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.345425] calling hmac_module_init+0x0/0xf @ 1
> [ 0.345517] initcall hmac_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.345609] calling md5_mod_init+0x0/0xf @ 1
> [ 0.345762] initcall md5_mod_init+0x0/0xf returned 0 after 62 usecs
> [ 0.345855] calling sha1_generic_mod_init+0x0/0xf @ 1
> [ 0.345998] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 50 usecs
> [ 0.346100] calling crypto_ecb_module_init+0x0/0xf @ 1
> [ 0.346193] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.346291] calling crypto_cbc_module_init+0x0/0xf @ 1
> [ 0.346384] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.346477] calling des_generic_mod_init+0x0/0x33 @ 1
> [ 0.346690] initcall des_generic_mod_init+0x0/0x33 returned 0 after 119 usecs
> [ 0.346785] calling aes_init+0x0/0xf @ 1
> [ 0.346945] initcall aes_init+0x0/0xf returned 0 after 69 usecs
> [ 0.347046] calling arc4_init+0x0/0xf @ 1
> [ 0.347226] initcall arc4_init+0x0/0xf returned 0 after 88 usecs
> [ 0.347324] calling crypto_authenc_module_init+0x0/0xf @ 1
> [ 0.347417] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 1 usecs
> [ 0.347547] calling krng_mod_init+0x0/0xf @ 1
> [ 0.347669] alg: No test for stdrng (krng)
> [ 0.347767] initcall krng_mod_init+0x0/0xf returned 0 after 126 usecs
> [ 0.347861] calling proc_genhd_init+0x0/0x2d @ 1
> [ 0.347956] initcall proc_genhd_init+0x0/0x2d returned 0 after 4 usecs
> [ 0.348056] calling bsg_init+0x0/0x10d @ 1
> [ 0.348296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.348427] initcall bsg_init+0x0/0x10d returned 0 after 275 usecs
> [ 0.348519] calling noop_init+0x0/0x11 @ 1
> [ 0.348608] io scheduler noop registered
> [ 0.348696] initcall noop_init+0x0/0x11 returned 0 after 85 usecs
> [ 0.348786] calling as_init+0x0/0x11 @ 1
> [ 0.348874] io scheduler anticipatory registered
> [ 0.348964] initcall as_init+0x0/0x11 returned 0 after 86 usecs
> [ 0.349062] calling deadline_init+0x0/0x11 @ 1
> [ 0.349150] io scheduler deadline registered
> [ 0.349239] initcall deadline_init+0x0/0x11 returned 0 after 85 usecs
> [ 0.349338] calling cfq_init+0x0/0x91 @ 1
> [ 0.349515] io scheduler cfq registered (default)
> [ 0.349605] initcall cfq_init+0x0/0x91 returned 0 after 173 usecs
> [ 0.349696] calling percpu_counter_startup+0x0/0x16 @ 1
> [ 0.349789] initcall percpu_counter_startup+0x0/0x16 returned 0 after 1 usecs
> [ 0.349882] calling audit_classes_init+0x0/0x4f @ 1
> [ 0.349978] initcall audit_classes_init+0x0/0x4f returned 0 after 4 usecs
> [ 0.350079] calling pci_init+0x0/0x2c @ 1
> [ 0.350177] pci 0000:00:02.0: Boot video device
> [ 0.350285] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.350377] pci 0000:00:1d.0: Performing full reset
> [ 0.350482] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.350573] pci 0000:00:1d.1: Performing full reset
> [ 0.350677] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.350769] pci 0000:00:1d.2: Performing full reset
> [ 0.350873] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
> [ 0.350964] pci 0000:00:1d.3: Performing full reset
> [ 0.351107] initcall pci_init+0x0/0x2c returned 0 after 917 usecs
> [ 0.351199] calling pci_proc_init+0x0/0x5b @ 1
> [ 0.351347] initcall pci_proc_init+0x0/0x5b returned 0 after 49 usecs
> [ 0.351440] calling pcie_portdrv_init+0x0/0x41 @ 1
> [ 0.351664] alloc irq_desc for 24 on node -1
> [ 0.351752] alloc kstat_irqs on node -1
> [ 0.351850] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
> [ 0.351950] pcieport-driver 0000:00:1c.0: setting latency timer to 64
> [ 0.353132] alloc irq_desc for 25 on node -1
> [ 0.353220] alloc kstat_irqs on node -1
> [ 0.353324] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
> [ 0.353421] pcieport-driver 0000:00:1c.1: setting latency timer to 64
> [ 0.353816] alloc irq_desc for 26 on node -1
> [ 0.353904] alloc kstat_irqs on node -1
> [ 0.353998] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
> [ 0.354105] pcieport-driver 0000:00:1c.2: setting latency timer to 64
> [ 0.354480] alloc irq_desc for 27 on node -1
> [ 0.354567] alloc kstat_irqs on node -1
> [ 0.354660] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
> [ 0.354759] pcieport-driver 0000:00:1c.3: setting latency timer to 64
> [ 0.355139] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 3523 usecs
> [ 0.355233] calling aer_service_init+0x0/0x1d @ 1
> [ 0.355390] initcall aer_service_init+0x0/0x1d returned 0 after 57 usecs
> [ 0.355483] calling pci_hotplug_init+0x0/0x18 @ 1
> [ 0.355573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.355665] initcall pci_hotplug_init+0x0/0x18 returned 0 after 88 usecs
> [ 0.355757] calling fb_console_init+0x0/0xf5 @ 1
> [ 0.355912] initcall fb_console_init+0x0/0xf5 returned 0 after 63 usecs
> [ 0.356014] calling genericbl_init+0x0/0xf @ 1
> [ 0.356161] initcall genericbl_init+0x0/0xf returned 0 after 55 usecs
> [ 0.356253] calling efifb_init+0x0/0x1b8 @ 1
> [ 0.356357] initcall efifb_init+0x0/0x1b8 returned -19 after 9 usecs
> [ 0.356450] calling acpi_reserve_resources+0x0/0xc8 @ 1
> [ 0.356544] initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 3 usecs
> [ 0.356638] calling irqrouter_init_sysfs+0x0/0x33 @ 1
> [ 0.356829] initcall irqrouter_init_sysfs+0x0/0x33 returned 0 after 97 usecs
> [ 0.356923] calling acpi_ac_init+0x0/0x3d @ 1
> [ 0.357536] ACPI: AC Adapter [AC] (on-line)
> [ 0.357690] initcall acpi_ac_init+0x0/0x3d returned 0 after 643 usecs
> [ 0.357785] calling acpi_button_init+0x0/0x4a @ 1
> [ 0.357978] input: Power Button as /class/input/input0
> [ 0.358075] ACPI: Power Button [PWRF]
> [ 0.358286] input: Lid Switch as /class/input/input1
> [ 0.358958] ACPI: Lid Switch [LID]
> [ 0.359153] input: Sleep Button as /class/input/input2
> [ 0.359245] ACPI: Sleep Button [SLPB]
> [ 0.359403] initcall acpi_button_init+0x0/0x4a returned 0 after 1490 usecs
> [ 0.359496] calling acpi_fan_init+0x0/0x4a @ 1
> [ 0.359649] initcall acpi_fan_init+0x0/0x4a returned 0 after 61 usecs
> [ 0.359741] calling acpi_video_init+0x0/0x6b @ 1
> [ 0.360402] input: Video Bus as /class/input/input3
> [ 0.360492] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 0.360659] initcall acpi_video_init+0x0/0x6b returned 0 after 807 usecs
> [ 0.360753] calling acpi_processor_init+0x0/0xe9 @ 1
> [ 0.361333] ACPI: SSDT 7f6e609e 001ED (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
> [ 0.362054] ACPI: SSDT 7f6e5de1 00238 (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
> [ 0.363535] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 0.363866] processor LNXCPU:00: registered as cooling_device0
> [ 0.363960] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 0.364541] ACPI: SSDT 7f6e628b 00094 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
> [ 0.365193] ACPI: SSDT 7f6e6019 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
> [ 0.366681] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 0.367015] processor LNXCPU:01: registered as cooling_device1
> [ 0.367108] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 0.367390] initcall acpi_processor_init+0x0/0xe9 returned 0 after 6391 usecs
> [ 0.367484] calling acpi_container_init+0x0/0x3d @ 1
> [ 0.372921] initcall acpi_container_init+0x0/0x3d returned 0 after 5219 usecs
> [ 0.373026] calling acpi_thermal_init+0x0/0x6f @ 1
> [ 0.376397] thermal LNXTHERM:01: registered as thermal_zone0
> [ 0.376493] ACPI: Thermal Zone [THM0] (55 C)
> [ 0.378159] thermal LNXTHERM:02: registered as thermal_zone1
> [ 0.378256] ACPI: Thermal Zone [THM1] (56 C)
> [ 0.378400] initcall acpi_thermal_init+0x0/0x6f returned 0 after 5157 usecs
> [ 0.378494] calling acpi_battery_init+0x0/0x13 @ 1
> [ 0.420206] ACPI: Battery Slot [BAT0] (battery present)
> [ 0.420371] initcall acpi_battery_init+0x0/0x13 returned 0 after 40805 usecs
> [ 0.420467] calling rand_initialize+0x0/0x25 @ 1
> [ 0.420582] initcall rand_initialize+0x0/0x25 returned 0 after 23 usecs
> [ 0.420675] calling tty_init+0x0/0xd5 @ 1
> [ 0.425266] initcall tty_init+0x0/0xd5 returned 0 after 4393 usecs
> [ 0.425361] calling pty_init+0x0/0x20d @ 1
> [ 0.425540] initcall pty_init+0x0/0x20d returned 0 after 86 usecs
> [ 0.425633] calling sysrq_init+0x0/0x1f @ 1
> [ 0.425726] initcall sysrq_init+0x0/0x1f returned 0 after 4 usecs
> [ 0.425818] calling hpet_init+0x0/0x57 @ 1
> [ 0.426111] initcall hpet_init+0x0/0x57 returned 0 after 197 usecs
> [ 0.426202] calling nvram_init+0x0/0x70 @ 1
> [ 0.426358] Non-volatile memory driver v1.3
> [ 0.426448] initcall nvram_init+0x0/0x70 returned 0 after 144 usecs
> [ 0.426540] calling mod_init+0x0/0x1ba @ 1
> [ 0.426734] intel_rng: FWH not detected
> [ 0.426854] initcall mod_init+0x0/0x1ba returned -19 after 219 usecs
> [ 0.426948] calling mod_init+0x0/0x9f @ 1
> [ 0.427073] initcall mod_init+0x0/0x9f returned -19 after 16 usecs
> [ 0.427165] calling mod_init+0x0/0x91 @ 1
> [ 0.427270] initcall mod_init+0x0/0x91 returned -19 after 15 usecs
> [ 0.427362] calling mod_init+0x0/0x41 @ 1
> [ 0.427451] initcall mod_init+0x0/0x41 returned -19 after 0 usecs
> [ 0.427543] calling agp_init+0x0/0x21 @ 1
> [ 0.427631] Linux agpgart interface v0.103
> [ 0.427720] initcall agp_init+0x0/0x21 returned 0 after 85 usecs
> [ 0.427811] calling agp_amd64_init+0x0/0xc0 @ 1
> [ 0.427970] initcall agp_amd64_init+0x0/0xc0 returned -19 after 65 usecs
> [ 0.428083] calling agp_intel_init+0x0/0x24 @ 1
> [ 0.428184] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
> [ 0.428933] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
> [ 0.432042] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [ 0.432221] initcall agp_intel_init+0x0/0x24 returned 0 after 3948 usecs
> [ 0.432324] calling drm_core_init+0x0/0xea @ 1
> [ 0.432486] [drm] Initialized drm 1.1.0 20060810
> [ 0.432577] initcall drm_core_init+0x0/0xea returned 0 after 159 usecs
> [ 0.432669] calling i915_init+0x0/0x58 @ 1
> [ 0.432856] pci 0000:00:02.0: power state changed by ACPI to D0
> [ 0.432952] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.433066] pci 0000:00:02.0: setting latency timer to 64
> [ 0.435959] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 0.436130] initcall i915_init+0x0/0x58 returned 0 after 3288 usecs
> [ 0.436223] calling cn_proc_init+0x0/0x30 @ 1
> [ 0.436325] initcall cn_proc_init+0x0/0x30 returned 0 after 3 usecs
> [ 0.436416] calling serial8250_init+0x0/0x113 @ 1
> [ 0.436506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.436900] async_waiting @ 1
> [ 0.436986] async_continuing @ 1 after 1 usec
> [ 0.558108] async_waiting @ 1
> [ 0.558195] async_continuing @ 1 after 1 usec
> [ 0.680159] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
> [ 0.680516] Platform driver 'serial8250' needs updating - please use dev_pm_ops
> [ 0.680720] initcall serial8250_init+0x0/0x113 returned 0 after 238488 usecs
> [ 0.680814] calling serial8250_pnp_init+0x0/0xf @ 1
> [ 0.681118] initcall serial8250_pnp_init+0x0/0xf returned 0 after 208 usecs
> [ 0.681212] calling serial8250_pci_init+0x0/0x16 @ 1
> [ 0.681414] initcall serial8250_pci_init+0x0/0x16 returned 0 after 99 usecs
> [ 0.681510] calling topology_sysfs_init+0x0/0x3f @ 1
> [ 0.681615] initcall topology_sysfs_init+0x0/0x3f returned 0 after 14 usecs
> [ 0.681709] calling brd_init+0x0/0x14e @ 1
> [ 0.684430] brd: module loaded
> [ 0.684519] initcall brd_init+0x0/0x14e returned 0 after 2657 usecs
> [ 0.684612] calling loop_init+0x0/0x166 @ 1
> [ 0.685961] loop: module loaded
> [ 0.686059] initcall loop_init+0x0/0x166 returned 0 after 1325 usecs
> [ 0.686152] calling cpqarray_init+0x0/0x22b @ 1
> [ 0.686240] Compaq SMART2 Driver (v 2.6.0)
> [ 0.686452] initcall cpqarray_init+0x0/0x22b returned -19 after 204 usecs
> [ 0.686546] calling mac_hid_init+0x0/0x75 @ 1
> [ 0.686729] input: Macintosh mouse button emulation as /class/input/input4
> [ 0.686851] initcall mac_hid_init+0x0/0x75 returned 0 after 209 usecs
> [ 0.686943] calling spi_transport_init+0x0/0x6c @ 1
> [ 0.687171] initcall spi_transport_init+0x0/0x6c returned 0 after 101 usecs
> [ 0.687272] calling ahc_linux_init+0x0/0x5c @ 1
> [ 0.687446] initcall ahc_linux_init+0x0/0x5c returned 0 after 81 usecs
> [ 0.687538] calling init_sd+0x0/0xb6 @ 1
> [ 0.687733] initcall init_sd+0x0/0xb6 returned 0 after 103 usecs
> [ 0.687825] calling init_sr+0x0/0x3d @ 1
> [ 0.687968] initcall init_sr+0x0/0x3d returned 0 after 52 usecs
> [ 0.688080] calling init_sg+0x0/0x133 @ 1
> [ 0.688234] initcall init_sg+0x0/0x133 returned 0 after 62 usecs
> [ 0.688333] calling ahci_init+0x0/0x16 @ 1
> [ 0.688446] ahci 0000:00:1f.2: version 3.0
> [ 0.688549] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.688679] alloc irq_desc for 28 on node -1
> [ 0.688767] alloc kstat_irqs on node -1
> [ 0.688863] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
> [ 0.689024] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
> [ 0.689157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
> [ 0.689255] ahci 0000:00:1f.2: setting latency timer to 64
> [ 0.689459] scsi0 : ahci
> [ 0.689686] scsi1 : ahci
> [ 0.689879] scsi2 : ahci
> [ 0.690070] scsi3 : ahci
> [ 0.690291] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28
> [ 0.690419] ata2: DUMMY
> [ 0.690502] ata3: DUMMY
> [ 0.690585] ata4: DUMMY
> [ 1.250038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.251600] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> [ 1.251693] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> [ 1.251785] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 1.253078] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
> [ 1.253170] ata1.00: 156301488 sectors, multi 16: LBA48
> [ 1.254937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> [ 1.255050] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> [ 1.255932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 1.257229] ata1.00: configured for UDMA/100
> [ 1.270677] ata1.00: configured for UDMA/100
> [ 1.270768] ata1: EH complete
> [ 1.270855] async_waiting @ 1
> [ 1.270941] async_continuing @ 1 after 1 usec
> [ 1.271148] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5
> [ 1.271477] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
> [ 1.271659] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.271748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.271864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.272142] sda: sda1 sda2
> [ 1.659535] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.659772] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.659958] async_waiting @ 1
> [ 1.660055] async_continuing @ 1 after 1 usec
> [ 1.660159] async_waiting @ 1
> [ 1.660245] async_continuing @ 1 after 1 usec
> [ 1.660355] async_waiting @ 1
> [ 1.660442] async_continuing @ 1 after 1 usec
> [ 1.660601] initcall ahci_init+0x0/0x16 returned 0 after 949390 usecs
> [ 1.660693] calling piix_init+0x0/0x27 @ 1
> [ 1.660798] ata_piix 0000:00:1f.1: version 2.13
> [ 1.660893] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
> [ 1.661028] ata_piix 0000:00:1f.1: setting latency timer to 64
> [ 1.661196] scsi4 : ata_piix
> [ 1.661393] scsi5 : ata_piix
> [ 1.662298] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
> [ 1.662391] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
> [ 1.816409] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
> [ 1.822317] ata5.00: configured for UDMA/33
> [ 1.823055] async_waiting @ 1
> [ 1.823142] async_continuing @ 1 after 1 usec
> [ 1.827280] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
> [ 1.838286] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> [ 1.838379] Uniform CD-ROM driver Revision: 3.20
> [ 1.838690] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 1.838933] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 1.839145] ata6: port disabled. ignoring.
> [ 1.839241] async_waiting @ 1
> [ 1.839335] async_continuing @ 1 after 1 usec
> [ 1.839489] initcall piix_init+0x0/0x27 returned 0 after 174516 usecs
> [ 1.839582] calling nv_init+0x0/0x16 @ 1
> [ 1.839737] initcall nv_init+0x0/0x16 returned 0 after 64 usecs
> [ 1.839829] calling amd_init+0x0/0x16 @ 1
> [ 1.839979] initcall amd_init+0x0/0x16 returned 0 after 59 usecs
> [ 1.840080] calling mpiix_init+0x0/0x16 @ 1
> [ 1.840230] initcall mpiix_init+0x0/0x16 returned 0 after 58 usecs
> [ 1.840327] calling oldpiix_init+0x0/0x16 @ 1
> [ 1.840478] initcall oldpiix_init+0x0/0x16 returned 0 after 59 usecs
> [ 1.840570] calling sch_init+0x0/0x16 @ 1
> [ 1.840719] initcall sch_init+0x0/0x16 returned 0 after 57 usecs
> [ 1.840810] calling ata_generic_init+0x0/0x16 @ 1
> [ 1.840963] initcall ata_generic_init+0x0/0x16 returned 0 after 60 usecs
> [ 1.841065] calling e1000_init_module+0x0/0x6e @ 1
> [ 1.841154] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
> [ 1.841246] Copyright (c) 1999-2006 Intel Corporation.
> [ 1.841412] initcall e1000_init_module+0x0/0x6e returned 0 after 251 usecs
> [ 1.841505] calling e1000_init_module+0x0/0x53 @ 1
> [ 1.841594] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
> [ 1.841683] e1000e: Copyright (c) 1999-2008 Intel Corporation.
> [ 1.841874] e1000e 0000:02:00.0: Disabling L1 ASPM
> [ 1.842048] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.842149] e1000e 0000:02:00.0: setting latency timer to 64
> [ 1.842419] alloc irq_desc for 29 on node -1
> [ 1.842507] alloc kstat_irqs on node -1
> [ 1.842609] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 1.883473] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
> [ 1.925641] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2
> [ 1.925771] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 1.925937] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
> [ 1.926107] initcall e1000_init_module+0x0/0x53 returned 0 after 82530 usecs
> [ 1.926200] calling vortex_init+0x0/0x9b @ 1
> [ 1.926364] initcall vortex_init+0x0/0x9b returned 0 after 66 usecs
> [ 1.926457] calling ne2k_pci_init+0x0/0x16 @ 1
> [ 1.926608] initcall ne2k_pci_init+0x0/0x16 returned 0 after 60 usecs
> [ 1.926701] calling e100_init_module+0x0/0x4d @ 1
> [ 1.926790] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [ 1.926880] e100: Copyright(c) 1999-2006 Intel Corporation
> [ 1.927046] initcall e100_init_module+0x0/0x4d returned 0 after 248 usecs
> [ 1.927138] calling tg3_init+0x0/0x16 @ 1
> [ 1.927304] initcall tg3_init+0x0/0x16 returned 0 after 74 usecs
> [ 1.927396] calling bnx2_init+0x0/0x16 @ 1
> [ 1.927547] initcall bnx2_init+0x0/0x16 returned 0 after 59 usecs
> [ 1.927639] calling sky2_init_module+0x0/0x20 @ 1
> [ 1.927727] sky2 driver version 1.23
> [ 1.927880] initcall sky2_init_module+0x0/0x20 returned 0 after 147 usecs
> [ 1.927973] calling net_olddevs_init+0x0/0x81 @ 1
> [ 1.928076] initcall net_olddevs_init+0x0/0x81 returned 0 after 5 usecs
> [ 1.928169] calling init_nic+0x0/0x16 @ 1
> [ 1.928328] initcall init_nic+0x0/0x16 returned 0 after 66 usecs
> [ 1.928420] calling rtl8139_init_module+0x0/0x16 @ 1
> [ 1.928576] initcall rtl8139_init_module+0x0/0x16 returned 0 after 64 usecs
> [ 1.928670] calling rtl8169_init_module+0x0/0x16 @ 1
> [ 1.928823] initcall rtl8169_init_module+0x0/0x16 returned 0 after 60 usecs
> [ 1.928917] calling init_ath5k_pci+0x0/0x2d @ 1
> [ 1.929084] initcall init_ath5k_pci+0x0/0x2d returned 0 after 68 usecs
> [ 1.929176] calling init_netconsole+0x0/0x1a2 @ 1
> [ 1.929275] netconsole: local port 4444
> [ 1.929361] netconsole: local IP 10.0.1.15
> [ 1.929448] netconsole: interface eth0
> [ 1.929535] netconsole: remote port 4444
> [ 1.929621] netconsole: remote IP 10.0.1.21
> [ 1.929709] netconsole: remote ethernet address 00:30:48:c6:86:26
> [ 1.929801] netconsole: device eth0 not up yet, forcing it
> [ 1.943283] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 1.994113] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 4.659020] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 4.817190] console [netcon0] enabled
> [ 4.817294] netconsole: network logging started
> [ 4.817394] initcall init_netconsole+0x0/0x1a2 returned 0 after 2820429 usecs
> [ 4.817497] calling cdrom_init+0x0/0xc @ 1
> [ 4.817596] initcall cdrom_init+0x0/0xc returned 0 after 1 usecs
> [ 4.817697] calling nonstatic_sysfs_init+0x0/0xf @ 1
> [ 4.817803] initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 5 usecs
> [ 4.817906] calling yenta_socket_init+0x0/0x16 @ 1
> [ 4.818039] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
> [ 4.818164] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
> [ 4.818312] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
> [ 4.818417] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
> [ 4.919062] async_waiting @ 1
> [ 4.919152] async_continuing @ 1 after 1 usec
> [ 5.041827] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
> [ 5.041922] yenta_cardbus 0000:15:00.0: Socket status: 30000007
> [ 5.042032] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
> [ 5.042173] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
> [ 5.042326] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
> [ 5.293140] initcall yenta_socket_init+0x0/0x16 returned 0 after 463995 usecs
> [ 5.293235] calling mon_init+0x0/0xe2 @ 1
> [ 5.293480] initcall mon_init+0x0/0xe2 returned 0 after 131 usecs
> [ 5.293574] calling ehci_hcd_init+0x0/0xbf @ 1
> [ 5.293672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 5.293774] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
> [ 5.294375] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
> [ 5.294474] alloc irq_desc for 19 on node -1
> [ 5.294564] alloc kstat_irqs on node -1
> [ 5.294664] IOAPIC[0]: Set routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1)
> [ 5.294802] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5.294912] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 5.295024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 5.295145] drivers/usb/core/inode.c: creating file 'devices'
> [ 5.295247] drivers/usb/core/inode.c: creating file '001'
> [ 5.295428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [ 5.295566] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
> [ 5.295707] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
> [ 5.295867] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
> [ 5.299905] ehci_hcd 0000:00:1d.7: debug port 1
> [ 5.300000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 5.300108] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
> [ 5.300219] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
> [ 5.300328] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> [ 5.304353] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
> [ 5.310015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 5.310158] usb usb1: default language 0x0409
> [ 5.310254] usb usb1: udev 1, busnum 1, minor = 0
> [ 5.310353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 5.310454] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.310591] usb usb1: Product: EHCI Host Controller
> [ 5.310687] usb usb1: Manufacturer: Linux 2.6.31-rc5-tip ehci_hcd
> [ 5.310786] usb usb1: SerialNumber: 0000:00:1d.7
> [ 5.310930] usb usb1: uevent
> [ 5.311098] usb usb1: usb_probe_device
> [ 5.311187] usb usb1: configuration #1 chosen from 1 choice
> [ 5.311297] usb usb1: adding 1-0:1.0 (config #1, interface 0)
> [ 5.311412] usb 1-0:1.0: uevent
> [ 5.311563] hub 1-0:1.0: usb_probe_interface
> [ 5.311653] hub 1-0:1.0: usb_probe_interface - got id
> [ 5.311751] hub 1-0:1.0: USB hub found
> [ 5.311851] hub 1-0:1.0: 8 ports detected
> [ 5.311946] hub 1-0:1.0: standalone hub
> [ 5.312049] hub 1-0:1.0: no power switching (usb 1.0)
> [ 5.312145] hub 1-0:1.0: individual port over-current protection
> [ 5.312245] hub 1-0:1.0: power on to power good time: 20ms
> [ 5.312352] hub 1-0:1.0: local power source is good
> [ 5.312450] hub 1-0:1.0: trying to enable port power on non-switchable hub
> [ 5.312599] drivers/usb/core/inode.c: creating file '001'
> [ 5.312771] initcall ehci_hcd_init+0x0/0xbf returned 0 after 18649 usecs
> [ 5.312865] calling ohci_hcd_mod_init+0x0/0x94 @ 1
> [ 5.312963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 5.313070] ohci_hcd: block sizes: ed 64 td 64
> [ 5.313243] initcall ohci_hcd_mod_init+0x0/0x94 returned 0 after 271 usecs
> [ 5.313344] calling uhci_hcd_init+0x0/0x10a @ 1
> [ 5.313441] uhci_hcd: USB Universal Host Controller Interface driver
> [ 5.314123] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
> [ 5.314220] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 5.314334] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 5.314433] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 5.314535] drivers/usb/core/inode.c: creating file '002'
> [ 5.314718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 5.314853] uhci_hcd 0000:00:1d.0: detected 2 ports
> [ 5.314954] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
> [ 5.315062] uhci_hcd 0000:00:1d.0: Performing full reset
> [ 5.315182] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
> [ 5.315284] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
> [ 5.315433] usb usb2: default language 0x0409
> [ 5.315529] usb usb2: udev 1, busnum 2, minor = 128
> [ 5.315627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.315728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.315865] usb usb2: Product: UHCI Host Controller
> [ 5.315961] usb usb2: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
> [ 5.316068] usb usb2: SerialNumber: 0000:00:1d.0
> [ 5.316207] usb usb2: uevent
> [ 5.316373] usb usb2: usb_probe_device
> [ 5.317244] usb usb2: configuration #1 chosen from 1 choice
> [ 5.317354] usb usb2: adding 2-0:1.0 (config #1, interface 0)
> [ 5.317470] usb 2-0:1.0: uevent
> [ 5.317619] hub 2-0:1.0: usb_probe_interface
> [ 5.317717] hub 2-0:1.0: usb_probe_interface - got id
> [ 5.317813] hub 2-0:1.0: USB hub found
> [ 5.317913] hub 2-0:1.0: 2 ports detected
> [ 5.318015] hub 2-0:1.0: standalone hub
> [ 5.318111] hub 2-0:1.0: no power switching (usb 1.0)
> [ 5.318208] hub 2-0:1.0: individual port over-current protection
> [ 5.318315] hub 2-0:1.0: power on to power good time: 2ms
> [ 5.318416] hub 2-0:1.0: local power source is good
> [ 5.318513] hub 2-0:1.0: trying to enable port power on non-switchable hub
> [ 5.318631] drivers/usb/core/inode.c: creating file '001'
> [ 5.318767] alloc irq_desc for 17 on node -1
> [ 5.318857] alloc kstat_irqs on node -1
> [ 5.318956] IOAPIC[0]: Set routing entry (1-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
> [ 5.319103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5.319208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 5.319316] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 5.319417] drivers/usb/core/inode.c: creating file '003'
> [ 5.319593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> [ 5.319729] uhci_hcd 0000:00:1d.1: detected 2 ports
> [ 5.319830] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
> [ 5.319930] uhci_hcd 0000:00:1d.1: Performing full reset
> [ 5.320048] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
> [ 5.320159] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
> [ 5.320293] usb usb3: default language 0x0409
> [ 5.320397] usb usb3: udev 1, busnum 3, minor = 256
> [ 5.320494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.320595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.320731] usb usb3: Product: UHCI Host Controller
> [ 5.320828] usb usb3: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
> [ 5.320927] usb usb3: SerialNumber: 0000:00:1d.1
> [ 5.321082] usb usb3: uevent
> [ 5.321232] usb usb3: usb_probe_device
> [ 5.321327] usb usb3: configuration #1 chosen from 1 choice
> [ 5.321430] usb usb3: adding 3-0:1.0 (config #1, interface 0)
> [ 5.321545] usb 3-0:1.0: uevent
> [ 5.321699] hub 3-0:1.0: usb_probe_interface
> [ 5.321787] hub 3-0:1.0: usb_probe_interface - got id
> [ 5.321883] hub 3-0:1.0: USB hub found
> [ 5.321985] hub 3-0:1.0: 2 ports detected
> [ 5.322087] hub 3-0:1.0: standalone hub
> [ 5.322182] hub 3-0:1.0: no power switching (usb 1.0)
> [ 5.322285] hub 3-0:1.0: individual port over-current protection
> [ 5.322385] hub 3-0:1.0: power on to power good time: 2ms
> [ 5.322485] hub 3-0:1.0: local power source is good
> [ 5.322582] hub 3-0:1.0: trying to enable port power on non-switchable hub
> [ 5.322702] drivers/usb/core/inode.c: creating file '001'
> [ 5.323510] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
> [ 5.323605] alloc irq_desc for 18 on node -1
> [ 5.323693] alloc kstat_irqs on node -1
> [ 5.323791] IOAPIC[0]: Set routing entry (1-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
> [ 5.323929] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 5.324043] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 5.324143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 5.324244] drivers/usb/core/inode.c: creating file '004'
> [ 5.324427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [ 5.324563] uhci_hcd 0000:00:1d.2: detected 2 ports
> [ 5.324663] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
> [ 5.324763] uhci_hcd 0000:00:1d.2: Performing full reset
> [ 5.324875] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
> [ 5.324985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
> [ 5.325132] usb usb4: default language 0x0409
> [ 5.325227] usb usb4: udev 1, busnum 4, minor = 384
> [ 5.325331] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.325432] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.325568] usb usb4: Product: UHCI Host Controller
> [ 5.325665] usb usb4: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
> [ 5.325765] usb usb4: SerialNumber: 0000:00:1d.2
> [ 5.325905] usb usb4: uevent
> [ 5.326071] usb usb4: usb_probe_device
> [ 5.326160] usb usb4: configuration #1 chosen from 1 choice
> [ 5.326264] usb usb4: adding 4-0:1.0 (config #1, interface 0)
> [ 5.326382] usb 4-0:1.0: uevent
> [ 5.326533] hub 4-0:1.0: usb_probe_interface
> [ 5.326622] hub 4-0:1.0: usb_probe_interface - got id
> [ 5.326719] hub 4-0:1.0: USB hub found
> [ 5.326820] hub 4-0:1.0: 2 ports detected
> [ 5.326915] hub 4-0:1.0: standalone hub
> [ 5.327017] hub 4-0:1.0: no power switching (usb 1.0)
> [ 5.327114] hub 4-0:1.0: individual port over-current protection
> [ 5.327213] hub 4-0:1.0: power on to power good time: 2ms
> [ 5.327322] hub 4-0:1.0: local power source is good
> [ 5.327418] hub 4-0:1.0: trying to enable port power on non-switchable hub
> [ 5.327536] drivers/usb/core/inode.c: creating file '001'
> [ 5.327677] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> [ 5.327774] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 5.327876] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 5.327977] drivers/usb/core/inode.c: creating file '005'
> [ 5.328167] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [ 5.328311] uhci_hcd 0000:00:1d.3: detected 2 ports
> [ 5.328411] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
> [ 5.328512] uhci_hcd 0000:00:1d.3: Performing full reset
> [ 5.328627] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
> [ 5.328768] usb usb5: default language 0x0409
> [ 5.328863] usb usb5: udev 1, busnum 5, minor = 512
> [ 5.328961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 5.329070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.329208] usb usb5: Product: UHCI Host Controller
> [ 5.329313] usb usb5: Manufacturer: Linux 2.6.31-rc5-tip uhci_hcd
> [ 5.329413] usb usb5: SerialNumber: 0000:00:1d.3
> [ 5.329563] usb usb5: uevent
> [ 5.329713] usb usb5: usb_probe_device
> [ 5.329801] usb usb5: configuration #1 chosen from 1 choice
> [ 5.329906] usb usb5: adding 5-0:1.0 (config #1, interface 0)
> [ 5.330029] usb 5-0:1.0: uevent
> [ 5.330179] hub 5-0:1.0: usb_probe_interface
> [ 5.330275] hub 5-0:1.0: usb_probe_interface - got id
> [ 5.330372] hub 5-0:1.0: USB hub found
> [ 5.330472] hub 5-0:1.0: 2 ports detected
> [ 5.330568] hub 5-0:1.0: standalone hub
> [ 5.330663] hub 5-0:1.0: no power switching (usb 1.0)
> [ 5.330761] hub 5-0:1.0: individual port over-current protection
> [ 5.330861] hub 5-0:1.0: power on to power good time: 2ms
> [ 5.330961] hub 5-0:1.0: local power source is good
> [ 5.331067] hub 5-0:1.0: trying to enable port power on non-switchable hub
> [ 5.331184] drivers/usb/core/inode.c: creating file '001'
> [ 5.331381] initcall uhci_hcd_init+0x0/0x10a returned 0 after 17516 usecs
> [ 5.331476] calling usblp_init+0x0/0x16 @ 1
> [ 5.331635] usbcore: registered new interface driver usblp
> [ 5.331730] initcall usblp_init+0x0/0x16 returned 0 after 152 usecs
> [ 5.331830] calling usb_stor_init+0x0/0x42 @ 1
> [ 5.331927] Initializing USB Mass Storage driver...
> [ 5.332119] usbcore: registered new interface driver usb-storage
> [ 5.332211] USB Mass Storage support registered.
> [ 5.332319] initcall usb_stor_init+0x0/0x42 returned 0 after 381 usecs
> [ 5.332420] calling usb_usual_init+0x0/0x30 @ 1
> [ 5.332603] usbcore: registered new interface driver libusual
> [ 5.332699] initcall usb_usual_init+0x0/0x30 returned 0 after 176 usecs
> [ 5.332801] calling i8042_init+0x0/0x35f @ 1
> [ 5.333051] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
> [ 5.333202] Platform driver 'i8042' needs updating - please use dev_pm_ops
> [ 5.341619] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 5.341716] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 5.341854] initcall i8042_init+0x0/0x35f returned 0 after 8744 usecs
> [ 5.341949] calling serport_init+0x0/0x2b @ 1
> [ 5.342057] initcall serport_init+0x0/0x2b returned 0 after 1 usecs
> [ 5.342157] calling mousedev_init+0x0/0x51 @ 1
> [ 5.342433] mice: PS/2 mouse device common for all mice
> [ 5.342526] initcall mousedev_init+0x0/0x51 returned 0 after 263 usecs
> [ 5.342627] calling evdev_init+0x0/0xf @ 1
> [ 5.343079] initcall evdev_init+0x0/0xf returned 0 after 345 usecs
> [ 5.343173] calling atkbd_init+0x0/0x20 @ 1
> [ 5.343350] initcall atkbd_init+0x0/0x20 returned 0 after 72 usecs
> [ 5.343444] calling psmouse_init+0x0/0x61 @ 1
> [ 5.343667] initcall psmouse_init+0x0/0x61 returned 0 after 121 usecs
> [ 5.343761] calling cmos_init+0x0/0x65 @ 1
> [ 5.343890] rtc_cmos 00:07: RTC can wake from S4
> [ 5.344078] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> [ 5.344201] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 5.344386] initcall cmos_init+0x0/0x65 returned 0 after 513 usecs
> [ 5.344480] calling i2c_i801_init+0x0/0x16 @ 1
> [ 5.344596] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 5.344903] initcall i2c_i801_init+0x0/0x16 returned 0 after 316 usecs
> [ 5.344997] calling dm_init+0x0/0x39 @ 1
> [ 5.345454] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
> [ 5.345590] initcall dm_init+0x0/0x39 returned 0 after 474 usecs
> [ 5.345690] calling dm_mirror_init+0x0/0x69 @ 1
> [ 5.345811] initcall dm_mirror_init+0x0/0x69 returned 0 after 16 usecs
> [ 5.345912] calling dm_dirty_log_init+0x0/0x49 @ 1
> [ 5.346021] initcall dm_dirty_log_init+0x0/0x49 returned 0 after 1 usecs
> [ 5.346122] calling dm_zero_init+0x0/0x28 @ 1
> [ 5.346221] initcall dm_zero_init+0x0/0x28 returned 0 after 1 usecs
> [ 5.346330] calling cpufreq_gov_dbs_init+0x0/0x9f @ 1
> [ 5.346526] initcall cpufreq_gov_dbs_init+0x0/0x9f returned 0 after 88 usecs
> [ 5.346621] calling init_ladder+0x0/0xf @ 1
> [ 5.347188] cpuidle: using governor ladder
> [ 5.348068] initcall init_ladder+0x0/0xf returned 0 after 1315 usecs
> [ 5.348169] calling init_menu+0x0/0xf @ 1
> [ 5.349088] input: AT Translated Set 2 keyboard as /class/input/input5
> [ 5.349518] cpuidle: using governor menu
> [ 5.349610] initcall init_menu+0x0/0xf returned 0 after 1308 usecs
> [ 5.349711] calling efivars_init+0x0/0x187 @ 1
> [ 5.349810] initcall efivars_init+0x0/0x187 returned -19 after 1 usecs
> [ 5.349912] calling hid_init+0x0/0x3d @ 1
> [ 5.350186] initcall hid_init+0x0/0x3d returned 0 after 165 usecs
> [ 5.350284] calling a4_init+0x0/0x16 @ 1
> [ 5.350470] initcall a4_init+0x0/0x16 returned 0 after 71 usecs
> [ 5.350563] calling apple_init+0x0/0x2d @ 1
> [ 5.350740] initcall apple_init+0x0/0x2d returned 0 after 76 usecs
> [ 5.350833] calling belkin_init+0x0/0x16 @ 1
> [ 5.350989] initcall belkin_init+0x0/0x16 returned 0 after 56 usecs
> [ 5.351097] calling ch_init+0x0/0x16 @ 1
> [ 5.351275] initcall ch_init+0x0/0x16 returned 0 after 77 usecs
> [ 5.351369] calling ch_init+0x0/0x16 @ 1
> [ 5.351539] initcall ch_init+0x0/0x16 returned 0 after 70 usecs
> [ 5.351632] calling cp_init+0x0/0x16 @ 1
> [ 5.351791] initcall cp_init+0x0/0x16 returned 0 after 60 usecs
> [ 5.351885] calling dr_init+0x0/0x16 @ 1
> [ 5.352056] initcall dr_init+0x0/0x16 returned 0 after 71 usecs
> [ 5.352149] calling ez_init+0x0/0x16 @ 1
> [ 5.352342] initcall ez_init+0x0/0x16 returned 0 after 93 usecs
> [ 5.352435] calling gyration_init+0x0/0x16 @ 1
> [ 5.352620] initcall gyration_init+0x0/0x16 returned 0 after 83 usecs
> [ 5.352715] calling ks_init+0x0/0x16 @ 1
> [ 5.352904] initcall ks_init+0x0/0x16 returned 0 after 89 usecs
> [ 5.352998] calling kye_init+0x0/0x16 @ 1
> [ 5.353189] initcall kye_init+0x0/0x16 returned 0 after 73 usecs
> [ 5.353285] calling lg_init+0x0/0x16 @ 1
> [ 5.353468] initcall lg_init+0x0/0x16 returned 0 after 71 usecs
> [ 5.353562] calling ms_init+0x0/0x16 @ 1
> [ 5.353974] initcall ms_init+0x0/0x16 returned 0 after 300 usecs
> [ 5.354089] calling mr_init+0x0/0x16 @ 1
> [ 5.354263] initcall mr_init+0x0/0x16 returned 0 after 72 usecs
> [ 5.354364] calling ntrig_init+0x0/0x16 @ 1
> [ 5.354534] initcall ntrig_init+0x0/0x16 returned 0 after 69 usecs
> [ 5.354628] calling pl_init+0x0/0x16 @ 1
> [ 5.354794] initcall pl_init+0x0/0x16 returned 0 after 66 usecs
> [ 5.354887] calling pl_init+0x0/0x16 @ 1
> [ 5.355059] initcall pl_init+0x0/0x16 returned 0 after 72 usecs
> [ 5.355151] calling samsung_init+0x0/0x16 @ 1
> [ 5.355343] initcall samsung_init+0x0/0x16 returned 0 after 90 usecs
> [ 5.355436] calling sjoy_init+0x0/0x16 @ 1
> [ 5.355616] initcall sjoy_init+0x0/0x16 returned 0 after 79 usecs
> [ 5.355710] calling sony_init+0x0/0x16 @ 1
> [ 5.355898] initcall sony_init+0x0/0x16 returned 0 after 87 usecs
> [ 5.355992] calling sp_init+0x0/0x16 @ 1
> [ 5.356194] initcall sp_init+0x0/0x16 returned 0 after 85 usecs
> [ 5.356290] calling ga_init+0x0/0x16 @ 1
> [ 5.356481] initcall ga_init+0x0/0x16 returned 0 after 75 usecs
> [ 5.356574] calling tm_init+0x0/0x16 @ 1
> [ 5.356733] initcall tm_init+0x0/0x16 returned 0 after 59 usecs
> [ 5.356826] calling ts_init+0x0/0x16 @ 1
> [ 5.357000] initcall ts_init+0x0/0x16 returned 0 after 67 usecs
> [ 5.357106] calling zp_init+0x0/0x16 @ 1
> [ 5.357289] initcall zp_init+0x0/0x16 returned 0 after 82 usecs
> [ 5.357382] calling hid_init+0x0/0xaa @ 1
> [ 5.357681] usbcore: registered new interface driver hiddev
> [ 5.357859] usbcore: registered new interface driver usbhid
> [ 5.357951] usbhid: v2.6:USB HID core driver
> [ 5.358071] initcall hid_init+0x0/0xaa returned 0 after 576 usecs
> [ 5.358171] calling usb_mouse_init+0x0/0x2d @ 1
> [ 5.358602] usbcore: registered new interface driver usbmouse
> [ 5.358695] usbmouse: v1.6:USB HID Boot Protocol mouse driver
> [ 5.358797] initcall usb_mouse_init+0x0/0x2d returned 0 after 511 usecs
> [ 5.358899] calling eeepc_laptop_init+0x0/0x3e1 @ 1
> [ 5.359180] initcall eeepc_laptop_init+0x0/0x3e1 returned -19 after 176 usecs
> [ 5.359277] calling init_soundcore+0x0/0x64 @ 1
> [ 5.359459] initcall init_soundcore+0x0/0x64 returned 0 after 66 usecs
> [ 5.359553] calling alsa_sound_init+0x0/0x77 @ 1
> [ 5.359667] Advanced Linux Sound Architecture Driver Version 1.0.20.
> [ 5.359770] initcall alsa_sound_init+0x0/0x77 returned 0 after 113 usecs
> [ 5.359872] calling alsa_hwdep_init+0x0/0x46 @ 1
> [ 5.359974] initcall alsa_hwdep_init+0x0/0x46 returned 0 after 3 usecs
> [ 5.360098] calling alsa_timer_init+0x0/0x12c @ 1
> [ 5.360287] initcall alsa_timer_init+0x0/0x12c returned 0 after 88 usecs
> [ 5.360382] calling snd_hrtimer_init+0x0/0xd4 @ 1
> [ 5.360482] initcall snd_hrtimer_init+0x0/0xd4 returned 0 after 1 usecs
> [ 5.360584] calling alsa_pcm_init+0x0/0x4d @ 1
> [ 5.360684] initcall alsa_pcm_init+0x0/0x4d returned 0 after 2 usecs
> [ 5.360785] calling snd_mem_init+0x0/0x24 @ 1
> [ 5.360887] initcall snd_mem_init+0x0/0x24 returned 0 after 3 usecs
> [ 5.360987] calling alsa_mixer_oss_init+0x0/0x2d @ 1
> [ 5.361111] initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 8 usecs
> [ 5.361206] calling alsa_pcm_oss_init+0x0/0x76 @ 1
> [ 5.361322] initcall alsa_pcm_oss_init+0x0/0x76 returned 0 after 1 usecs
> [ 5.361431] calling alsa_seq_init+0x0/0x51 @ 1
> [ 5.361905] initcall alsa_seq_init+0x0/0x51 returned 0 after 366 usecs
> [ 5.362000] calling alsa_seq_device_init+0x0/0x4e @ 1
> [ 5.362110] initcall alsa_seq_device_init+0x0/0x4e returned 0 after 2 usecs
> [ 5.362212] calling alsa_seq_midi_event_init+0x0/0x7 @ 1
> [ 5.362317] initcall alsa_seq_midi_event_init+0x0/0x7 returned 0 after 1 usecs
> [ 5.362466] calling alsa_seq_oss_init+0x0/0x130 @ 1
> [ 5.362833] initcall alsa_seq_oss_init+0x0/0x130 returned 0 after 260 usecs
> [ 5.362929] calling alsa_seq_dummy_init+0x0/0xa7 @ 1
> [ 5.363059] initcall alsa_seq_dummy_init+0x0/0xa7 returned 0 after 14 usecs
> [ 5.363153] calling patch_realtek_init+0x0/0xf @ 1
> [ 5.363258] initcall patch_realtek_init+0x0/0xf returned 0 after 4 usecs
> [ 5.363371] calling patch_cmedia_init+0x0/0xf @ 1
> [ 5.363472] initcall patch_cmedia_init+0x0/0xf returned 0 after 1 usecs
> [ 5.363572] calling patch_analog_init+0x0/0xf @ 1
> [ 5.363673] initcall patch_analog_init+0x0/0xf returned 0 after 1 usecs
> [ 5.363773] calling patch_sigmatel_init+0x0/0xf @ 1
> [ 5.363874] initcall patch_sigmatel_init+0x0/0xf returned 0 after 1 usecs
> [ 5.363975] calling patch_si3054_init+0x0/0xf @ 1
> [ 5.364082] initcall patch_si3054_init+0x0/0xf returned 0 after 1 usecs
> [ 5.364183] calling patch_atihdmi_init+0x0/0xf @ 1
> [ 5.364286] initcall patch_atihdmi_init+0x0/0xf returned 0 after 1 usecs
> [ 5.364397] calling patch_ca0110_init+0x0/0xf @ 1
> [ 5.364497] initcall patch_ca0110_init+0x0/0xf returned 0 after 1 usecs
> [ 5.364597] calling patch_conexant_init+0x0/0xf @ 1
> [ 5.364697] initcall patch_conexant_init+0x0/0xf returned 0 after 1 usecs
> [ 5.364798] calling patch_via_init+0x0/0xf @ 1
> [ 5.364898] initcall patch_via_init+0x0/0xf returned 0 after 1 usecs
> [ 5.364998] calling patch_nvhdmi_init+0x0/0xf @ 1
> [ 5.365106] initcall patch_nvhdmi_init+0x0/0xf returned 0 after 1 usecs
> [ 5.365208] calling patch_intelhdmi_init+0x0/0xf @ 1
> [ 5.365312] initcall patch_intelhdmi_init+0x0/0xf returned 0 after 1 usecs
> [ 5.365425] calling alsa_card_azx_init+0x0/0x16 @ 1
> [ 5.365557] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5.365689] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 5.365808] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 5.399675] initcall alsa_card_azx_init+0x0/0x16 returned 0 after 33348 usecs
> [ 5.399772] calling alsa_sound_last_init+0x0/0x50 @ 1
> [ 5.399872] ALSA device list:
> [ 5.399965] #0: HDA Intel at 0xee240000 irq 17
> [ 5.400078] initcall alsa_sound_last_init+0x0/0x50 returned 0 after 199 usecs
> [ 5.400181] calling flow_cache_init+0x0/0x141 @ 1
> [ 5.400318] initcall flow_cache_init+0x0/0x141 returned 0 after 33 usecs
> [ 5.400412] calling llc_init+0x0/0x1b @ 1
> [ 5.400512] initcall llc_init+0x0/0x1b returned 0 after 1 usecs
> [ 5.400612] calling snap_init+0x0/0x31 @ 1
> [ 5.400710] initcall snap_init+0x0/0x31 returned 0 after 1 usecs
> [ 5.400811] calling rif_init+0x0/0x6b @ 1
> [ 5.400934] initcall rif_init+0x0/0x6b returned 0 after 24 usecs
> [ 5.401056] calling blackhole_module_init+0x0/0xf @ 1
> [ 5.401158] initcall blackhole_module_init+0x0/0xf returned 0 after 1 usecs
> [ 5.401263] calling nfnetlink_init+0x0/0x51 @ 1
> [ 5.401372] Netfilter messages via NETLINK v0.30.
> [ 5.401479] initcall nfnetlink_init+0x0/0x51 returned 0 after 102 usecs
> [ 5.401581] calling nfnetlink_log_init+0x0/0xb3 @ 1
> [ 5.401699] initcall nfnetlink_log_init+0x0/0xb3 returned 0 after 10 usecs
> [ 5.401802] calling nf_conntrack_standalone_init+0x0/0xf @ 1
> [ 5.401903] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 5.402740] initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 816 usecs
> [ 5.402874] calling ctnetlink_init+0x0/0x62 @ 1
> [ 5.402971] ctnetlink v0.93: registering with nfnetlink.
> [ 5.403091] initcall ctnetlink_init+0x0/0x62 returned 0 after 115 usecs
> [ 5.403194] calling nf_conntrack_ftp_init+0x0/0x189 @ 1
> [ 5.403300] initcall nf_conntrack_ftp_init+0x0/0x189 returned 0 after 3 usecs
> [ 5.403412] calling nf_conntrack_irc_init+0x0/0x17e @ 1
> [ 5.403517] initcall nf_conntrack_irc_init+0x0/0x17e returned 0 after 2 usecs
> [ 5.403619] calling nf_conntrack_sip_init+0x0/0x159 @ 1
> [ 5.403721] initcall nf_conntrack_sip_init+0x0/0x159 returned 0 after 1 usecs
> [ 5.403823] calling xt_init+0x0/0xda @ 1
> [ 5.403922] initcall xt_init+0x0/0xda returned 0 after 1 usecs
> [ 5.404029] calling tcpudp_mt_init+0x0/0x14 @ 1
> [ 5.404130] initcall tcpudp_mt_init+0x0/0x14 returned 0 after 2 usecs
> [ 5.404231] calling connsecmark_tg_init+0x0/0xf @ 1
> [ 5.404345] initcall connsecmark_tg_init+0x0/0xf returned 0 after 10 usecs
> [ 5.404447] calling mark_tg_init+0x0/0x14 @ 1
> [ 5.404547] initcall mark_tg_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.404648] calling nflog_tg_init+0x0/0xf @ 1
> [ 5.404747] initcall nflog_tg_init+0x0/0xf returned 0 after 1 usecs
> [ 5.404848] calling secmark_tg_init+0x0/0xf @ 1
> [ 5.404948] initcall secmark_tg_init+0x0/0xf returned 0 after 1 usecs
> [ 5.405057] calling tcpmss_tg_init+0x0/0x14 @ 1
> [ 5.405156] initcall tcpmss_tg_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.405259] calling conntrack_mt_init+0x0/0x14 @ 1
> [ 5.405374] initcall conntrack_mt_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.405475] calling mark_mt_init+0x0/0x14 @ 1
> [ 5.405757] initcall mark_mt_init+0x0/0x14 returned 0 after 172 usecs
> [ 5.405851] calling policy_mt_init+0x0/0x14 @ 1
> [ 5.405952] initcall policy_mt_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.406838] calling state_mt_init+0x0/0x14 @ 1
> [ 5.406946] initcall state_mt_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.407052] calling sysctl_ipv4_init+0x0/0x3f @ 1
> [ 5.407600] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 438 usecs
> [ 5.407694] calling init_syncookies+0x0/0x16 @ 1
> [ 5.407844] initcall init_syncookies+0x0/0x16 returned 0 after 48 usecs
> [ 5.407938] calling tunnel4_init+0x0/0x5a @ 1
> [ 5.408045] initcall tunnel4_init+0x0/0x5a returned 0 after 1 usecs
> [ 5.408147] calling ipv4_netfilter_init+0x0/0xf @ 1
> [ 5.408248] initcall ipv4_netfilter_init+0x0/0xf returned 0 after 1 usecs
> [ 5.408352] calling nf_conntrack_l3proto_ipv4_init+0x0/0x11d @ 1
> [ 5.409022] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x11d returned 0 after 535 usecs
> [ 5.409154] calling nf_nat_init+0x0/0xea @ 1
> [ 5.409290] initcall nf_nat_init+0x0/0xea returned 0 after 36 usecs
> [ 5.409383] calling nf_defrag_init+0x0/0x14 @ 1
> [ 5.409483] initcall nf_defrag_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.409584] calling nf_nat_ftp_init+0x0/0x1e @ 1
> [ 5.409684] initcall nf_nat_ftp_init+0x0/0x1e returned 0 after 1 usecs
> [ 5.409784] calling nf_nat_irc_init+0x0/0x1e @ 1
> [ 5.409884] initcall nf_nat_irc_init+0x0/0x1e returned 0 after 1 usecs
> [ 5.409983] calling nf_nat_sip_init+0x0/0x91 @ 1
> [ 5.410091] initcall nf_nat_sip_init+0x0/0x91 returned 0 after 1 usecs
> [ 5.410191] calling ip_tables_init+0x0/0x92 @ 1
> [ 5.410298] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 5.410407] initcall ip_tables_init+0x0/0x92 returned 0 after 112 usecs
> [ 5.410507] calling iptable_filter_init+0x0/0x5d @ 1
> [ 5.410615] initcall iptable_filter_init+0x0/0x5d returned 0 after 8 usecs
> [ 5.410716] calling iptable_mangle_init+0x0/0x38 @ 1
> [ 5.410822] initcall iptable_mangle_init+0x0/0x38 returned 0 after 5 usecs
> [ 5.410924] calling nf_nat_standalone_init+0x0/0x73 @ 1
> [ 5.411036] initcall nf_nat_standalone_init+0x0/0x73 returned 0 after 5 usecs
> [ 5.411139] calling log_tg_init+0x0/0x24 @ 1
> [ 5.411239] initcall log_tg_init+0x0/0x24 returned 0 after 1 usecs
> [ 5.411342] calling masquerade_tg_init+0x0/0x2d @ 1
> [ 5.411693] initcall masquerade_tg_init+0x0/0x2d returned 0 after 225 usecs
> [ 5.411788] calling reject_tg_init+0x0/0xf @ 1
> [ 5.411888] initcall reject_tg_init+0x0/0xf returned 0 after 1 usecs
> [ 5.411989] calling ulog_tg_init+0x0/0xbe @ 1
> [ 5.412099] initcall ulog_tg_init+0x0/0xbe returned 0 after 4 usecs
> [ 5.412199] calling cubictcp_register+0x0/0x93 @ 1
> [ 5.412301] TCP cubic registered
> [ 5.412410] initcall cubictcp_register+0x0/0x93 returned 0 after 105 usecs
> [ 5.412512] calling xfrm_user_init+0x0/0x40 @ 1
> [ 5.412608] Initializing XFRM netlink socket
> [ 5.412709] initcall xfrm_user_init+0x0/0x40 returned 0 after 97 usecs
> [ 5.412810] calling inet6_init+0x0/0x277 @ 1
> [ 5.413051] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
> [ 5.413184] hub 1-0:1.0: port 8: status 0501 change 0001
> [ 5.413671] NET: Registered protocol family 10
> [ 5.415678] initcall inet6_init+0x0/0x277 returned 0 after 2703 usecs
> [ 5.415774] calling ah6_init+0x0/0x5a @ 1
> [ 5.415875] initcall ah6_init+0x0/0x5a returned 0 after 1 usecs
> [ 5.415974] calling esp6_init+0x0/0x5a @ 1
> [ 5.416081] initcall esp6_init+0x0/0x5a returned 0 after 1 usecs
> [ 5.416181] calling xfrm6_transport_init+0x0/0x14 @ 1
> [ 5.416285] initcall xfrm6_transport_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.416396] calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
> [ 5.416497] initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.416598] calling xfrm6_beet_init+0x0/0x14 @ 1
> [ 5.416698] initcall xfrm6_beet_init+0x0/0x14 returned 0 after 1 usecs
> [ 5.416799] calling ip6_tables_init+0x0/0x92 @ 1
> [ 5.416904] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 5.417011] initcall ip6_tables_init+0x0/0x92 returned 0 after 110 usecs
> [ 5.417113] calling ip6table_filter_init+0x0/0x5d @ 1
> [ 5.417459] initcall ip6table_filter_init+0x0/0x5d returned 0 after 233 usecs
> [ 5.417560] calling ip6table_mangle_init+0x0/0x38 @ 1
> [ 5.417668] initcall ip6table_mangle_init+0x0/0x38 returned 0 after 6 usecs
> [ 5.417769] calling nf_conntrack_l3proto_ipv6_init+0x0/0xef @ 1
> [ 5.417937] initcall nf_conntrack_l3proto_ipv6_init+0x0/0xef returned 0 after 64 usecs
> [ 5.418102] calling ipv6header_mt6_init+0x0/0xf @ 1
> [ 5.418205] initcall ipv6header_mt6_init+0x0/0xf returned 0 after 1 usecs
> [ 5.418309] calling log_tg6_init+0x0/0x24 @ 1
> [ 5.418419] initcall log_tg6_init+0x0/0x24 returned 0 after 1 usecs
> [ 5.418520] calling reject_tg6_init+0x0/0xf @ 1
> [ 5.418619] initcall reject_tg6_init+0x0/0xf returned 0 after 1 usecs
> [ 5.418719] calling sit_init+0x0/0x5f @ 1
> [ 5.418815] IPv6 over IPv4 tunneling driver
> [ 5.419018] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 5.419887] initcall sit_init+0x0/0x5f returned 0 after 1044 usecs
> [ 5.419980] calling packet_init+0x0/0x39 @ 1
> [ 5.420086] NET: Registered protocol family 17
> [ 5.420426] initcall packet_init+0x0/0x39 returned 0 after 329 usecs
> [ 5.420528] calling init_sunrpc+0x0/0x53 @ 1
> [ 5.420932] RPC: Registered udp transport module.
> [ 5.421031] RPC: Registered tcp transport module.
> [ 5.421131] initcall init_sunrpc+0x0/0x53 returned 0 after 492 usecs
> [ 5.421232] calling init_rpcsec_gss+0x0/0x3f @ 1
> [ 5.421344] initcall init_rpcsec_gss+0x0/0x3f returned 0 after 8 usecs
> [ 5.421453] calling init_kerberos_module+0x0/0x26 @ 1
> [ 5.421556] initcall init_kerberos_module+0x0/0x26 returned 0 after 4 usecs
> [ 5.421661] calling severities_debugfs_init+0x0/0x4e @ 1
> [ 5.421770] initcall severities_debugfs_init+0x0/0x4e returned 0 after 9 usecs
> [ 5.421910] calling acpi_cpufreq_init+0x0/0xbf @ 1
> [ 5.422347] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 5.426065] initcall acpi_cpufreq_init+0x0/0xbf returned 0 after 3951 usecs
> [ 5.426162] calling hpet_insert_resource+0x0/0x1e @ 1
> [ 5.426271] initcall hpet_insert_resource+0x0/0x1e returned 0 after 4 usecs
> [ 5.426381] calling update_mp_table+0x0/0x3ad @ 1
> [ 5.426482] initcall update_mp_table+0x0/0x3ad returned 0 after 1 usecs
> [ 5.426590] calling lapic_insert_resource+0x0/0x33 @ 1
> [ 5.426691] initcall lapic_insert_resource+0x0/0x33 returned 0 after 1 usecs
> [ 5.426793] calling print_ipi_mode+0x0/0x26 @ 1
> [ 5.426890] Using IPI No-Shortcut mode
> [ 5.426986] initcall print_ipi_mode+0x0/0x26 returned 0 after 92 usecs
> [ 5.427096] calling init_lapic_nmi_sysfs+0x0/0x33 @ 1
> [ 5.427196] initcall init_lapic_nmi_sysfs+0x0/0x33 returned 0 after 1 usecs
> [ 5.427301] calling io_apic_bug_finalize+0x0/0x1c @ 1
> [ 5.427415] initcall io_apic_bug_finalize+0x0/0x1c returned 0 after 2 usecs
> [ 5.427517] calling check_early_ioremap_leak+0x0/0x5e @ 1
> [ 5.427619] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 1 usecs
> [ 5.427758] calling pat_memtype_list_init+0x0/0x23 @ 1
> [ 5.428110] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 5.428218] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 351 usecs
> [ 5.428361] calling init_oops_id+0x0/0x3a @ 1
> [ 5.428473] initcall init_oops_id+0x0/0x3a returned 0 after 1 usecs
> [ 5.428574] calling disable_boot_consoles+0x0/0x3a @ 1
> [ 5.428675] initcall disable_boot_consoles+0x0/0x3a returned 0 after 1 usecs
> [ 5.428777] calling pm_qos_power_init+0x0/0x54 @ 1
> [ 5.429120] initcall pm_qos_power_init+0x0/0x54 returned 0 after 237 usecs
> [ 5.429216] calling software_resume+0x0/0x19d @ 1
> [ 5.429319] PM: Resume from disk failed.
> [ 5.429429] initcall software_resume+0x0/0x19d returned -2 after 105 usecs
> [ 5.429531] initcall software_resume+0x0/0x19d returned with error code -2
> [ 5.429635] calling debugfs_kprobe_init+0x0/0x78 @ 1
> [ 5.429742] initcall debugfs_kprobe_init+0x0/0x78 returned 0 after 7 usecs
> [ 5.429844] calling taskstats_init+0x0/0x7d @ 1
> [ 5.429945] registered taskstats version 1
> [ 5.430051] initcall taskstats_init+0x0/0x7d returned 0 after 107 usecs
> [ 5.430153] calling clear_boot_tracer+0x0/0x27 @ 1
> [ 5.430253] initcall clear_boot_tracer+0x0/0x27 returned 0 after 1 usecs
> [ 5.430358] calling max_swapfiles_check+0x0/0x7 @ 1
> [ 5.430470] initcall max_swapfiles_check+0x0/0x7 returned 0 after 1 usecs
> [ 5.430571] calling random32_reseed+0x0/0x7e @ 1
> [ 5.430684] initcall random32_reseed+0x0/0x7e returned 0 after 14 usecs
> [ 5.430786] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
> [ 5.430892] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 3 usecs
> [ 5.431048] calling pci_sysfs_init+0x0/0x44 @ 1
> [ 5.431161] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
> [ 5.431714] initcall pci_sysfs_init+0x0/0x44 returned 0 after 554 usecs
> [ 5.431811] calling seqgen_init+0x0/0xe @ 1
> [ 5.431927] initcall seqgen_init+0x0/0xe returned 0 after 16 usecs
> [ 5.432038] calling late_resume_init+0x0/0xc2 @ 1
> [ 5.432136] Magic number: 5:366:74
> [ 5.432316] initcall late_resume_init+0x0/0xc2 returned 0 after 174 usecs
> [ 5.432410] calling scsi_complete_async_scans+0x0/0xf4 @ 1
> [ 5.432511] initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 1 usecs
> [ 5.432649] calling memmap_init+0x0/0x8a @ 1
> [ 5.432807] initcall memmap_init+0x0/0x8a returned 0 after 59 usecs
> [ 5.432901] calling pci_mmcfg_late_insert_resources+0x0/0x12e @ 1
> [ 5.433013] initcall pci_mmcfg_late_insert_resources+0x0/0x12e returned 0 after 10 usecs
> [ 5.433153] calling tcp_congestion_default+0x0/0xf @ 1
> [ 5.433257] initcall tcp_congestion_default+0x0/0xf returned 0 after 1 usecs
> [ 5.433372] calling ip_auto_config+0x0/0xd22 @ 1
> [ 5.433475] initcall ip_auto_config+0x0/0xd22 returned 0 after 4 usecs
> [ 5.433576] calling initialize_hashrnd+0x0/0x16 @ 1
> [ 5.433680] initcall initialize_hashrnd+0x0/0x16 returned 0 after 4 usecs
> [ 5.512059] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
> [ 5.512156] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
> [ 5.563254] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
> [ 5.563350] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT
> [ 5.563490] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
> [ 5.614058] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC
> [ 5.614211] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [ 5.614311] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
> [ 5.704097] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
> [ 5.704195] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
> [ 5.704315] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
> [ 5.808059] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> [ 5.910056] usb 5-2: new full speed USB device using uhci_hcd and address 2
> [ 6.000070] Clocksource tsc unstable (delta = -270104002 ns)
> [ 6.011844] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
> [ 6.011976] serio: Synaptics pass-through port at isa0060/serio1/input0
> [ 6.030026] usb 5-2: ep0 maxpacket = 8
> [ 6.053781] usb 5-2: default language 0x0409
> [ 6.054626] input: SynPS/2 Synaptics TouchPad as /class/input/input6
> [ 6.058807] async_waiting @ 1
> [ 6.058903] async_continuing @ 1 after 1 usec
> [ 6.059373] md: Waiting for all devices to be available before autodetect
> [ 6.059470] md: If you don't use raid, use raid=noautodetect
> [ 6.072781] usb 5-2: udev 2, busnum 5, minor = 513
> [ 6.072872] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
> [ 6.072973] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.073094] usb 5-2: Product: Biometric Coprocessor
> [ 6.073190] usb 5-2: Manufacturer: STMicroelectronics
> [ 6.073349] usb 5-2: uevent
> [ 6.073630] usb 5-2: usb_probe_device
> [ 6.073719] usb 5-2: configuration #1 chosen from 1 choice
> [ 6.075783] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
> [ 6.075892] usb 5-2:1.0: uevent
> [ 6.076112] drivers/usb/core/inode.c: creating file '002'
> [ 6.076222] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
> [ 6.454033] usb usb2: suspend_rh (auto-stop)
> [ 6.454146] usb usb3: suspend_rh (auto-stop)
> [ 6.454261] usb usb4: suspend_rh (auto-stop)
> [ 7.704063] hub 2-0:1.0: hub_suspend
> [ 7.704155] usb usb2: bus auto-suspend
> [ 7.704249] usb usb2: suspend_rh
> [ 7.704367] hub 3-0:1.0: hub_suspend
> [ 7.704456] usb usb3: bus auto-suspend
> [ 7.704551] usb usb3: suspend_rh
> [ 7.704660] hub 4-0:1.0: hub_suspend
> [ 7.704748] usb usb4: bus auto-suspend
> [ 7.704843] usb usb4: suspend_rh
> [ 7.704952] hub 1-0:1.0: hub_suspend
> [ 7.705050] usb usb1: bus auto-suspend
> [ 7.705154] ehci_hcd 0000:00:1d.7: suspend root hub
> [ 11.497204] IBM TrackPoint firmware: 0x0e, buttons: 3/3
> [ 11.725545] input: TPPS/2 IBM TrackPoint as /class/input/input7
> [ 11.807485] async_waiting @ 1
> [ 11.807575] async_continuing @ 1 after 1 usec
> [ 11.807943] md: Autodetecting RAID arrays.
> [ 11.808049] md: Scanned 0 and added 0 devices.
> [ 11.808146] md: autorun ...
> [ 11.808240] md: ... autorun DONE.
> [ 12.181957] kjournald starting. Commit interval 5 seconds
> [ 12.181982] EXT3-fs: mounted filesystem with writeback data mode.
> [ 12.181993] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
> [ 12.182046] async_waiting @ 1
> [ 12.182050] async_continuing @ 1 after 1 usec
> [ 12.182062] Freeing unused kernel memory: 376k freed
> [ 12.182560] Write protecting the kernel text: 4500k
> [ 12.182721] Write protecting the kernel read-only data: 2196k
> [ 13.464436] sh used greatest stack depth: 6284 bytes left
> [ 14.209169] mount used greatest stack depth: 6256 bytes left
> [ 15.252079] awk used greatest stack depth: 5956 bytes left
> [ 16.155028] eth0: no IPv6 routers present
> [ 16.398723] readahead[895]: segfault at 0 ip 00c693b3 sp bfdbd30c error 4 in libc-2.9.so[bf2000+16e000]
> [ 16.929854] usb usb2: uevent
> [ 16.929976] usb 2-0:1.0: uevent
> [ 16.930154] usb usb3: uevent
> [ 16.930269] usb 3-0:1.0: uevent
> [ 16.930424] usb usb4: uevent
> [ 16.930547] usb 4-0:1.0: uevent
> [ 16.930696] usb usb5: uevent
> [ 16.930809] usb 5-0:1.0: uevent
> [ 16.930935] usb 5-2: uevent
> [ 16.931069] usb 5-2:1.0: uevent
> [ 16.931226] usb usb1: uevent
> [ 16.931350] usb 1-0:1.0: uevent
> [ 25.714165] EXT3 FS on sda1, internal journal
> [ 27.705850] Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k
> [ 29.035661] ip used greatest stack depth: 5752 bytes left
> [ 45.490796] CPUFREQ: ondemand sampling_rate_max sysfs file is deprecated - used by: cat
> [ 102.555904] ssh used greatest stack depth: 5312 bytes left
> # head: baace7ea
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.31-rc5
> # Sun Aug 9 12:56:59 2009
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=y
> # CONFIG_X86_64 is not set
> CONFIG_X86=y
> CONFIG_OUTPUT_FORMAT="elf32-i386"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_FAST_CMPXCHG_LOCAL=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> # CONFIG_GENERIC_TIME_VSYSCALL is not set
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
> # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> # CONFIG_ZONE_DMA32 is not set
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> # CONFIG_AUDIT_ARCH is not set
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_X86_32_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_TRAMPOLINE=y
> CONFIG_X86_32_LAZY_GS=y
> CONFIG_KTIME_SCALAR=y
> # CONFIG_BOOTPARAM_SUPPORT is not set
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_CONSTRUCTORS=y
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> # CONFIG_BROKEN_BOOT_ALLOWED4 is not set
> # CONFIG_BROKEN_BOOT_EUROPE is not set
> # CONFIG_BROKEN_BOOT_TITAN is not set
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_TREE=y
>
> #
> # RCU Subsystem
> #
> CONFIG_TREE_RCU=y
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_RCU_TRACE is not set
> CONFIG_RCU_FANOUT=32
> # CONFIG_RCU_FANOUT_EXACT is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_PREEMPT_RCU_TRACE is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=18
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_GROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> # CONFIG_RT_GROUP_SCHED is not set
> # CONFIG_USER_SCHED is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_CGROUP_NS=y
> CONFIG_CGROUP_FREEZER=y
> # CONFIG_CGROUP_DEVICE is not set
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_RESOURCE_COUNTERS=y
> # CONFIG_CGROUP_MEM_RES_CTLR is not set
> CONFIG_SYSFS_DEPRECATED=y
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> CONFIG_RELAY=y
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> CONFIG_NET_NS=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_EXTRA_PASS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_HAVE_PERF_COUNTERS=y
>
> #
> # Performance Counters
> #
> CONFIG_PERF_COUNTERS=y
> CONFIG_EVENT_PROFILE=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_PCI_QUIRKS=y
> CONFIG_SLUB_DEBUG=y
> # CONFIG_STRIP_ASM_SYMS is not set
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_MARKERS=y
> # CONFIG_OPROFILE is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
>
> #
> # GCOV-based kernel profiling
> #
> # CONFIG_SLOW_WORK is not set
> CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_LBDAF=y
> CONFIG_BLK_DEV_BSG=y
> # CONFIG_BLK_DEV_INTEGRITY is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_FREEZER=y
>
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> # CONFIG_SMP_SUPPORT is not set
> CONFIG_SPARSE_IRQ=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_X86_BIGSMP is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_32_NON_STANDARD is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> CONFIG_M686=y
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_INTERNODE_CACHE_BYTES=64
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=5
> CONFIG_X86_XADD=y
> # CONFIG_X86_PPRO_FENCE is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=4
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_CYRIX_32=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_CPU_SUP_TRANSMETA_32=y
> CONFIG_CPU_SUP_UMC_32=y
> # CONFIG_X86_DS is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> # CONFIG_IOMMU_HELPER is not set
> # CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> # CONFIG_X86_ANCIENT_MCE is not set
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_X86_THERMAL_VECTOR=y
> CONFIG_VM86=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> CONFIG_X86_REBOOTFIXUPS=y
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> CONFIG_MICROCODE_AMD=y
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_X86_CPU_DEBUG is not set
> # CONFIG_UP_WANTED_1 is not set
> CONFIG_SMP=y
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_PAGE_OFFSET=0xC0000000
> CONFIG_HIGHMEM=y
> # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ILLEGAL_POINTER_VALUE=0
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPARSEMEM_STATIC=y
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> # CONFIG_PHYS_ADDR_T_64BIT is not set
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_HAVE_MLOCK=y
> CONFIG_HAVE_MLOCKED_PAGE_BIT=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_HIGHPTE=y
> CONFIG_X86_CHECK_BIOS_CORRUPTION=y
> CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
> CONFIG_X86_RESERVE_LOW_64K=y
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_MTRR_SANITIZER is not set
> CONFIG_X86_PAT=y
> CONFIG_EFI=y
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> # CONFIG_KEXEC_JUMP is not set
> CONFIG_PHYSICAL_START=0x1000000
> CONFIG_RELOCATABLE=y
> CONFIG_X86_NEED_RELOCS=y
> CONFIG_PHYSICAL_ALIGN=0x1000000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
>
> #
> # Power management and ACPI options
> #
> CONFIG_PM=y
> CONFIG_PM_DEBUG=y
> # CONFIG_PM_VERBOSE is not set
> CONFIG_CAN_PM_TRACE=y
> CONFIG_PM_TRACE=y
> CONFIG_PM_TRACE_RTC=y
> CONFIG_PM_SLEEP_SMP=y
> CONFIG_PM_SLEEP=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> CONFIG_HIBERNATION_NVS=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_PROCFS=y
> CONFIG_ACPI_PROCFS_POWER=y
> CONFIG_ACPI_SYSFS_POWER=y
> CONFIG_ACPI_PROC_EVENT=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> # CONFIG_ACPI_PCI_SLOT is not set
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> # CONFIG_ACPI_SBS is not set
> # CONFIG_APM is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> # CONFIG_CPU_FREQ_STAT is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=y
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_SPEEDSTEP_ICH is not set
> # CONFIG_X86_SPEEDSTEP_SMI is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
> # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
> # CONFIG_X86_E_POWERSAVER is not set
>
> #
> # shared options
> #
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> # CONFIG_PCI_GOOLPC is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_DMAR is not set
> CONFIG_PCIEPORTBUS=y
> # CONFIG_HOTPLUG_PCI_PCIE is not set
> CONFIG_PCIEAER=y
> # CONFIG_PCIE_ECRC is not set
> # CONFIG_PCIEAER_INJECT is not set
> # CONFIG_PCIEASPM is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_LEGACY is not set
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_STUB is not set
> CONFIG_HT_IRQ=y
> # CONFIG_PCI_IOV is not set
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_OLPC is not set
> CONFIG_K8_NB=y
> CONFIG_PCCARD=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_PCMCIA_IOCTL=y
> CONFIG_CARDBUS=y
>
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> # CONFIG_PD6729 is not set
> # CONFIG_I82092 is not set
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> # CONFIG_HOTPLUG_PCI_FAKE is not set
> # CONFIG_HOTPLUG_PCI_COMPAQ is not set
> # CONFIG_HOTPLUG_PCI_IBM is not set
> # CONFIG_HOTPLUG_PCI_ACPI is not set
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> # CONFIG_HOTPLUG_PCI_SHPC is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
> CONFIG_HAVE_AOUT=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=y
> CONFIG_HAVE_ATOMIC_IOMAP=y
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> CONFIG_INET_TUNNEL=y
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> # CONFIG_INET_DIAG is not set
> CONFIG_TCP_CONG_ADVANCED=y
> # CONFIG_TCP_CONG_BIC is not set
> CONFIG_TCP_CONG_CUBIC=y
> # CONFIG_TCP_CONG_WESTWOOD is not set
> # CONFIG_TCP_CONG_HTCP is not set
> # CONFIG_TCP_CONG_HSTCP is not set
> # CONFIG_TCP_CONG_HYBLA is not set
> # CONFIG_TCP_CONG_VEGAS is not set
> # CONFIG_TCP_CONG_SCALABLE is not set
> # CONFIG_TCP_CONG_LP is not set
> # CONFIG_TCP_CONG_VENO is not set
> # CONFIG_TCP_CONG_YEAH is not set
> # CONFIG_TCP_CONG_ILLINOIS is not set
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_IPV6_ROUTER_PREF is not set
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> CONFIG_INET6_AH=y
> CONFIG_INET6_ESP=y
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_IPV6_MIP6 is not set
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> CONFIG_INET6_XFRM_MODE_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_BEET=y
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> CONFIG_IPV6_SIT=y
> CONFIG_IPV6_NDISC_NODETYPE=y
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_IPV6_MULTIPLE_TABLES is not set
> # CONFIG_IPV6_MROUTE is not set
> CONFIG_NETLABEL=y
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> # CONFIG_NETFILTER_ADVANCED is not set
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=y
> CONFIG_NETFILTER_NETLINK_LOG=y
> CONFIG_NF_CONNTRACK=y
> CONFIG_NF_CONNTRACK_SECMARK=y
> CONFIG_NF_CONNTRACK_FTP=y
> CONFIG_NF_CONNTRACK_IRC=y
> CONFIG_NF_CONNTRACK_SIP=y
> CONFIG_NF_CT_NETLINK=y
> CONFIG_NETFILTER_XTABLES=y
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
> CONFIG_NETFILTER_XT_TARGET_MARK=y
> CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> CONFIG_NETFILTER_XT_TARGET_SECMARK=y
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> CONFIG_NETFILTER_XT_MATCH_MARK=y
> CONFIG_NETFILTER_XT_MATCH_POLICY=y
> CONFIG_NETFILTER_XT_MATCH_STATE=y
> # CONFIG_IP_VS is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=y
> CONFIG_NF_CONNTRACK_IPV4=y
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_NF_NAT=y
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_NF_NAT_FTP=y
> CONFIG_NF_NAT_IRC=y
> # CONFIG_NF_NAT_TFTP is not set
> # CONFIG_NF_NAT_AMANDA is not set
> # CONFIG_NF_NAT_PPTP is not set
> # CONFIG_NF_NAT_H323 is not set
> CONFIG_NF_NAT_SIP=y
> CONFIG_IP_NF_MANGLE=y
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV6=y
> CONFIG_IP6_NF_IPTABLES=y
> CONFIG_IP6_NF_MATCH_IPV6HEADER=y
> CONFIG_IP6_NF_TARGET_LOG=y
> CONFIG_IP6_NF_FILTER=y
> CONFIG_IP6_NF_TARGET_REJECT=y
> CONFIG_IP6_NF_MANGLE=y
> # CONFIG_IP_DCCP is not set
> # CONFIG_IP_SCTP is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_NET_DSA is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_PHONET is not set
> # CONFIG_IEEE802154 is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> # CONFIG_NET_SCH_CBQ is not set
> # CONFIG_NET_SCH_HTB is not set
> # CONFIG_NET_SCH_HFSC is not set
> # CONFIG_NET_SCH_PRIO is not set
> # CONFIG_NET_SCH_MULTIQ is not set
> # CONFIG_NET_SCH_RED is not set
> # CONFIG_NET_SCH_SFQ is not set
> # CONFIG_NET_SCH_TEQL is not set
> # CONFIG_NET_SCH_TBF is not set
> # CONFIG_NET_SCH_GRED is not set
> # CONFIG_NET_SCH_DSMARK is not set
> # CONFIG_NET_SCH_NETEM is not set
> # CONFIG_NET_SCH_DRR is not set
> # CONFIG_NET_SCH_INGRESS is not set
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> # CONFIG_NET_CLS_BASIC is not set
> # CONFIG_NET_CLS_TCINDEX is not set
> # CONFIG_NET_CLS_ROUTE4 is not set
> # CONFIG_NET_CLS_FW is not set
> # CONFIG_NET_CLS_U32 is not set
> # CONFIG_NET_CLS_RSVP is not set
> # CONFIG_NET_CLS_RSVP6 is not set
> # CONFIG_NET_CLS_FLOW is not set
> # CONFIG_NET_CLS_CGROUP is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> # CONFIG_NET_EMATCH_CMP is not set
> # CONFIG_NET_EMATCH_NBYTE is not set
> # CONFIG_NET_EMATCH_U32 is not set
> # CONFIG_NET_EMATCH_META is not set
> # CONFIG_NET_EMATCH_TEXT is not set
> CONFIG_NET_CLS_ACT=y
> # CONFIG_NET_ACT_POLICE is not set
> # CONFIG_NET_ACT_GACT is not set
> # CONFIG_NET_ACT_MIRRED is not set
> # CONFIG_NET_ACT_IPT is not set
> # CONFIG_NET_ACT_NAT is not set
> # CONFIG_NET_ACT_PEDIT is not set
> # CONFIG_NET_ACT_SIMP is not set
> # CONFIG_NET_ACT_SKBEDIT is not set
> CONFIG_NET_SCH_FIFO=y
> # CONFIG_DCB is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_NET_DROP_MONITOR is not set
> CONFIG_HAMRADIO=y
>
> #
> # Packet Radio protocols
> #
> # CONFIG_AX25 is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_CFG80211=y
> # CONFIG_CFG80211_REG_DEBUG is not set
> # CONFIG_CFG80211_DEBUGFS is not set
> CONFIG_WIRELESS_OLD_REGULATORY=y
> CONFIG_WIRELESS_EXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> # CONFIG_LIB80211 is not set
> CONFIG_MAC80211=y
> CONFIG_MAC80211_DEFAULT_PS=y
> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
>
> #
> # Rate control algorithm selection
> #
> CONFIG_MAC80211_RC_MINSTREL=y
> # CONFIG_MAC80211_RC_DEFAULT_PID is not set
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel"
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUGFS is not set
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> CONFIG_RFKILL=y
> CONFIG_RFKILL_LEDS=y
> CONFIG_RFKILL_INPUT=y
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE=""
> # CONFIG_DEBUG_DRIVER is not set
> CONFIG_DEBUG_DEVRES=y
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> CONFIG_PNP_DEBUG_MESSAGES=y
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_FD is not set
> CONFIG_BLK_CPQ_DA=y
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_C2PORT is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_MAX6875 is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_CB710_CORE is not set
> CONFIG_HAVE_IDE=y
>
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> # CONFIG_SCSI_NETLINK is not set
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
> # CONFIG_SCSI_SCAN_ASYNC is not set
> CONFIG_SCSI_WAIT_SCAN=m
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_LOWLEVEL is not set
> CONFIG_SCSI_AIC7XXX=y
> # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
> # CONFIG_SCSI_DH is not set
> # CONFIG_SCSI_OSD_INITIATOR is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> # CONFIG_SATA_SVW is not set
> CONFIG_ATA_PIIX=y
> # CONFIG_SATA_MV is not set
> CONFIG_SATA_NV=y
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> CONFIG_PATA_AMD=y
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CS5535 is not set
> # CONFIG_PATA_CS5536 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> CONFIG_ATA_GENERIC=y
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_MARVELL is not set
> CONFIG_PATA_MPIIX=y
> CONFIG_PATA_OLDPIIX=y
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PCMCIA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> CONFIG_PATA_SCH=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID10 is not set
> # CONFIG_MD_RAID456 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_DEBUG is not set
> # CONFIG_DM_CRYPT is not set
> # CONFIG_DM_SNAPSHOT is not set
> CONFIG_DM_MIRROR=y
> # CONFIG_DM_LOG_USERSPACE is not set
> CONFIG_DM_ZERO=y
> # CONFIG_DM_MULTIPATH is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # You can enable one or both FireWire driver stacks.
> #
>
> #
> # See the help texts for more information.
> #
> # CONFIG_FIREWIRE is not set
> # CONFIG_IEEE1394 is not set
> # CONFIG_I2O is not set
> CONFIG_MACINTOSH_DRIVERS=y
> CONFIG_MAC_EMUMOUSEBTN=y
> CONFIG_NETDEVICES=y
> # CONFIG_IFB is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=y
>
> #
> # MII PHY device drivers
> #
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_CICADA_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_FIXED_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=y
> # CONFIG_TYPHOON is not set
> # CONFIG_ETHOC is not set
> # CONFIG_DNET is not set
> CONFIG_NET_TULIP=y
> # CONFIG_DE2104X is not set
> # CONFIG_TULIP is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
> # CONFIG_ULI526X is not set
> # CONFIG_PCMCIA_XIRCOM is not set
> # CONFIG_HP100 is not set
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> CONFIG_FORCEDETH=y
> # CONFIG_FORCEDETH_NAPI is not set
> CONFIG_E100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> CONFIG_NE2K_PCI=y
> # CONFIG_8139CP is not set
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_R6040 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SMSC9420 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_KS8842 is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_SC92031 is not set
> # CONFIG_ATL2 is not set
> CONFIG_NETDEV_1000=y
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000E=y
> # CONFIG_IP1000 is not set
> # CONFIG_IGB is not set
> # CONFIG_IGBVF is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_R8169=y
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> CONFIG_SKY2=y
> # CONFIG_SKY2_DEBUG is not set
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> CONFIG_BNX2=y
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_JME is not set
> CONFIG_NETDEV_10000=y
> # CONFIG_CHELSIO_T1 is not set
> CONFIG_CHELSIO_T3_DEPENDS=y
> # CONFIG_CHELSIO_T3 is not set
> # CONFIG_ENIC is not set
> # CONFIG_IXGBE is not set
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
> # CONFIG_MYRI10GE is not set
> # CONFIG_NIU is not set
> # CONFIG_MLX4_EN is not set
> # CONFIG_MLX4_CORE is not set
> # CONFIG_TEHUTI is not set
> # CONFIG_BNX2X is not set
> # CONFIG_QLGE is not set
> # CONFIG_SFC is not set
> # CONFIG_BE2NET is not set
> CONFIG_TR=y
> # CONFIG_IBMOL is not set
> # CONFIG_IBMLS is not set
> # CONFIG_3C359 is not set
> # CONFIG_TMS380TR is not set
>
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> CONFIG_WLAN_80211=y
> # CONFIG_PCMCIA_RAYCS is not set
> # CONFIG_LIBERTAS is not set
> # CONFIG_LIBERTAS_THINFIRM is not set
> # CONFIG_AIRO is not set
> # CONFIG_ATMEL is not set
> # CONFIG_AT76C50X_USB is not set
> # CONFIG_AIRO_CS is not set
> # CONFIG_PCMCIA_WL3501 is not set
> # CONFIG_PRISM54 is not set
> # CONFIG_USB_ZD1201 is not set
> # CONFIG_USB_NET_RNDIS_WLAN is not set
> # CONFIG_RTL8180 is not set
> # CONFIG_RTL8187 is not set
> # CONFIG_ADM8211 is not set
> # CONFIG_MAC80211_HWSIM is not set
> # CONFIG_MWL8K is not set
> # CONFIG_P54_COMMON is not set
> CONFIG_ATH_COMMON=y
> CONFIG_ATH5K=y
> # CONFIG_ATH5K_DEBUG is not set
> # CONFIG_ATH9K is not set
> # CONFIG_AR9170_USB is not set
> # CONFIG_IPW2100 is not set
> # CONFIG_IPW2200 is not set
> # CONFIG_IWLWIFI is not set
> # CONFIG_HOSTAP is not set
> # CONFIG_B43 is not set
> # CONFIG_B43LEGACY is not set
> # CONFIG_ZD1211RW is not set
> # CONFIG_HERMES is not set
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_USB_HSO is not set
> CONFIG_NET_PCMCIA=y
> # CONFIG_PCMCIA_3C589 is not set
> # CONFIG_PCMCIA_3C574 is not set
> # CONFIG_PCMCIA_FMVJ18X is not set
> # CONFIG_PCMCIA_PCNET is not set
> # CONFIG_PCMCIA_NMCLAN is not set
> # CONFIG_PCMCIA_SMC91C92 is not set
> # CONFIG_PCMCIA_XIRC2PS is not set
> # CONFIG_PCMCIA_AXNET is not set
> # CONFIG_PCMCIA_IBMTR is not set
> # CONFIG_WAN is not set
> CONFIG_FDDI=y
> # CONFIG_DEFXX is not set
> # CONFIG_SKFP is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> CONFIG_NETCONSOLE=y
> # CONFIG_NETCONSOLE_DYNAMIC is not set
> CONFIG_NETPOLL=y
> # CONFIG_NETPOLL_TRAP is not set
> CONFIG_NET_POLL_CONTROLLER=y
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_MOUSE_SYNAPTICS_I2C is not set
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDJOY is not set
> # CONFIG_JOYSTICK_ZHENHUA is not set
> # CONFIG_JOYSTICK_JOYDUMP is not set
> # CONFIG_JOYSTICK_XPAD is not set
> CONFIG_INPUT_TABLET=y
> # CONFIG_TABLET_USB_ACECAD is not set
> # CONFIG_TABLET_USB_AIPTEK is not set
> # CONFIG_TABLET_USB_GTCO is not set
> # CONFIG_TABLET_USB_KBTAB is not set
> # CONFIG_TABLET_USB_WACOM is not set
> CONFIG_INPUT_TOUCHSCREEN=y
> # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
> # CONFIG_TOUCHSCREEN_AD7879 is not set
> # CONFIG_TOUCHSCREEN_EETI is not set
> # CONFIG_TOUCHSCREEN_FUJITSU is not set
> # CONFIG_TOUCHSCREEN_GUNZE is not set
> # CONFIG_TOUCHSCREEN_ELO is not set
> # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
> # CONFIG_TOUCHSCREEN_MTOUCH is not set
> # CONFIG_TOUCHSCREEN_INEXIO is not set
> # CONFIG_TOUCHSCREEN_MK712 is not set
> # CONFIG_TOUCHSCREEN_PENMOUNT is not set
> # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
> # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
> # CONFIG_TOUCHSCREEN_TSC2007 is not set
> # CONFIG_TOUCHSCREEN_W90X900 is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_PCSPKR is not set
> # CONFIG_INPUT_APANEL is not set
> # CONFIG_INPUT_WISTRON_BTNS is not set
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_DEVKMEM=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINK is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_SYNCLINK_GT is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_RISCOM8 is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
> # CONFIG_NOZOMI is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> # CONFIG_SERIAL_8250_CS is not set
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> CONFIG_HW_RANDOM_INTEL=y
> CONFIG_HW_RANDOM_AMD=y
> CONFIG_HW_RANDOM_GEODE=y
> CONFIG_HW_RANDOM_VIA=y
> CONFIG_NVRAM=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_CARDMAN_4000 is not set
> # CONFIG_CARDMAN_4040 is not set
> # CONFIG_IPWIRELESS is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_NSC_GPIO is not set
> # CONFIG_CS5535_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> # CONFIG_HPET_MMAP is not set
> # CONFIG_HANGCHECK_TIMER is not set
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> # CONFIG_I2C_CHARDEV is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=y
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=y
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_SIMTEC is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
>
> #
> # Graphics adapter I2C/DDC channel drivers
> #
> # CONFIG_I2C_VOODOO3 is not set
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_SCx200_ACB is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
>
> #
> # PPS support
> #
> # CONFIG_PPS is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> # CONFIG_GPIOLIB is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> # CONFIG_BATTERY_MAX17040 is not set
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATK0110 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_G760A is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_CORETEMP is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LTC4215 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_LM95241 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_DME1737 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_TMP401 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=y
> # CONFIG_THERMAL_HWMON is not set
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> # CONFIG_ALIM1535_WDT is not set
> # CONFIG_ALIM7101_WDT is not set
> # CONFIG_SC520_WDT is not set
> # CONFIG_IB700_WDT is not set
> # CONFIG_IBMASR is not set
> # CONFIG_WAFER_WDT is not set
> # CONFIG_I6300ESB_WDT is not set
> # CONFIG_ITCO_WDT is not set
> # CONFIG_IT8712F_WDT is not set
> # CONFIG_IT87_WDT is not set
> # CONFIG_HP_WATCHDOG is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_PC87413_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_SBC7240_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_SMSC_SCH311X_WDT is not set
> # CONFIG_SMSC37B787_WDT is not set
> # CONFIG_W83627HF_WDT is not set
> # CONFIG_W83697HF_WDT is not set
> # CONFIG_W83697UG_WDT is not set
> # CONFIG_W83877F_WDT is not set
> # CONFIG_W83977F_WDT is not set
> # CONFIG_MACHZ_WDT is not set
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
>
> #
> # PCI-based Watchdog Cards
> #
> # CONFIG_PCIPCWATCHDOG is not set
> # CONFIG_WDTPCI is not set
>
> #
> # USB-based Watchdog Cards
> #
> # CONFIG_USBPCWATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> # CONFIG_SSB is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_AB3100_CORE is not set
> # CONFIG_REGULATOR is not set
> # CONFIG_MEDIA_SUPPORT is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> CONFIG_DRM_I915=y
> # CONFIG_DRM_I915_KMS is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> # CONFIG_FIRMWARE_EDID is not set
> # CONFIG_FB_DDC is not set
> # CONFIG_FB_BOOT_VESA_SUPPORT is not set
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> # CONFIG_FB_BACKLIGHT is not set
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_EFI=y
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I810 is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_BROADSHEET is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> CONFIG_BACKLIGHT_GENERIC=y
> # CONFIG_BACKLIGHT_PROGEAR is not set
> # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
>
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_SOUND=y
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> CONFIG_SND_SEQUENCER=y
> CONFIG_SND_SEQ_DUMMY=y
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_HRTIMER=y
> CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_VMASTER=y
> # CONFIG_SND_RAWMIDI_SEQ is not set
> # CONFIG_SND_OPL3_LIB_SEQ is not set
> # CONFIG_SND_OPL4_LIB_SEQ is not set
> # CONFIG_SND_SBAWE_SEQ is not set
> # CONFIG_SND_EMU10K1_SEQ is not set
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_PCSP is not set
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_CS5535AUDIO is not set
> # CONFIG_SND_CTXFI is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_INDIGOIOX is not set
> # CONFIG_SND_INDIGODJX is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> CONFIG_SND_HDA_INTEL=y
> CONFIG_SND_HDA_HWDEP=y
> # CONFIG_SND_HDA_RECONFIG is not set
> # CONFIG_SND_HDA_INPUT_BEEP is not set
> # CONFIG_SND_HDA_INPUT_JACK is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_ATIHDMI=y
> CONFIG_SND_HDA_CODEC_NVHDMI=y
> CONFIG_SND_HDA_CODEC_INTELHDMI=y
> CONFIG_SND_HDA_ELD=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CA0110=y
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> CONFIG_SND_HDA_CODEC_SI3054=y
> CONFIG_SND_HDA_GENERIC=y
> # CONFIG_SND_HDA_POWER_SAVE is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_HIFIER is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_LX6464ES is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SIS7019 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
> CONFIG_SND_USB=y
> # CONFIG_SND_USB_AUDIO is not set
> # CONFIG_SND_USB_USX2Y is not set
> # CONFIG_SND_USB_CAIAQ is not set
> # CONFIG_SND_USB_US122L is not set
> CONFIG_SND_PCMCIA=y
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_PDAUDIOCF is not set
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> CONFIG_HID_DEBUG=y
> CONFIG_HIDRAW=y
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_MOUSE=y
>
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> CONFIG_HID_APPLE=y
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> CONFIG_HID_CYPRESS=y
> CONFIG_HID_DRAGONRISE=y
> # CONFIG_DRAGONRISE_FF is not set
> CONFIG_HID_EZKEY=y
> CONFIG_HID_KYE=y
> CONFIG_HID_GYRATION=y
> CONFIG_HID_KENSINGTON=y
> CONFIG_HID_LOGITECH=y
> CONFIG_LOGITECH_FF=y
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> CONFIG_HID_NTRIG=y
> CONFIG_HID_PANTHERLORD=y
> CONFIG_PANTHERLORD_FF=y
> CONFIG_HID_PETALYNX=y
> CONFIG_HID_SAMSUNG=y
> CONFIG_HID_SONY=y
> CONFIG_HID_SUNPLUS=y
> CONFIG_HID_GREENASIA=y
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_SMARTJOYPLUS=y
> # CONFIG_SMARTJOYPLUS_FF is not set
> CONFIG_HID_TOPSEED=y
> CONFIG_HID_THRUSTMASTER=y
> CONFIG_THRUSTMASTER_FF=y
> CONFIG_HID_ZEROPLUS=y
> CONFIG_ZEROPLUS_FF=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> CONFIG_USB_DEBUG=y
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_OTG is not set
> CONFIG_USB_MON=y
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> # CONFIG_USB_XHCI_HCD is not set
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=y
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> CONFIG_USB_LIBUSUAL=y
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_VST is not set
>
> #
> # OTG and related infrastructure
> #
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_UWB is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_ALIX2 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_LP3944 is not set
> # CONFIG_LEDS_CLEVO_MAIL is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_BD2802 is not set
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> # CONFIG_LEDS_TRIGGER_TIMER is not set
> # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
>
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> # CONFIG_EDAC_MM_EDAC is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> # CONFIG_RTC_HCTOSYS is not set
> # CONFIG_RTC_DEBUG is not set
>
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
>
> #
> # I2C RTC drivers
> #
> # CONFIG_RTC_DRV_DS1307 is not set
> # CONFIG_RTC_DRV_DS1374 is not set
> # CONFIG_RTC_DRV_DS1672 is not set
> # CONFIG_RTC_DRV_MAX6900 is not set
> # CONFIG_RTC_DRV_RS5C372 is not set
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_X1205 is not set
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> # CONFIG_RTC_DRV_M41T80 is not set
> # CONFIG_RTC_DRV_S35390A is not set
> # CONFIG_RTC_DRV_FM3130 is not set
> # CONFIG_RTC_DRV_RX8581 is not set
> # CONFIG_RTC_DRV_RX8025 is not set
>
> #
> # SPI RTC drivers
> #
>
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=y
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> # CONFIG_RTC_DRV_DS1742 is not set
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> # CONFIG_RTC_DRV_BQ4802 is not set
> # CONFIG_RTC_DRV_V3020 is not set
>
> #
> # on-CPU RTC drivers
> #
> CONFIG_DMADEVICES=y
>
> #
> # DMA Devices
> #
> # CONFIG_INTEL_IOATDMA is not set
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
>
> #
> # TI VLYNQ
> #
> CONFIG_X86_PLATFORM_DEVICES=y
> # CONFIG_ACER_WMI is not set
> # CONFIG_ASUS_LAPTOP is not set
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_TC1100_WMI is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_PANASONIC_LAPTOP is not set
> # CONFIG_COMPAL_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> CONFIG_EEEPC_LAPTOP=y
> # CONFIG_ACPI_WMI is not set
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_EFI_VARS=y
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> CONFIG_DMIID=y
> # CONFIG_ISCSI_IBFT_FIND is not set
>
> #
> # File systems
> #
> # CONFIG_EXT2_FS is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> # CONFIG_EXT4_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> CONFIG_FILE_LOCKING=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> CONFIG_QUOTA_NETLINK_INTERFACE=y
> # CONFIG_PRINT_QUOTA_WARNING is not set
> CONFIG_QUOTA_TREE=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> # CONFIG_FUSE_FS is not set
> CONFIG_GENERIC_ACL=y
>
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> # CONFIG_CONFIGFS_FS is not set
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> # CONFIG_NFS_V4_1 is not set
> CONFIG_ROOT_NFS=y
> # CONFIG_NFSD is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_ACL_SUPPORT=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=y
> CONFIG_RPCSEC_GSS_KRB5=y
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> # CONFIG_DLM is not set
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_ALLOW_WARNINGS=y
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> # CONFIG_DETECT_SOFTLOCKUP is not set
> # CONFIG_DETECT_HUNG_TASK is not set
> # CONFIG_SCHED_DEBUG is not set
> CONFIG_SCHEDSTATS=y
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> CONFIG_STACKTRACE=y
> # CONFIG_DEBUG_HIGHMEM is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_VIRTUAL is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> CONFIG_FRAME_POINTER=y
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> CONFIG_SYSCTL_SYSCALL_CHECK=y
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_FTRACE_SYSCALLS=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> # CONFIG_FUNCTION_TRACER is not set
> # CONFIG_IRQSOFF_TRACER is not set
> # CONFIG_SYSPROF_TRACER is not set
> # CONFIG_SCHED_TRACER is not set
> # CONFIG_FTRACE_SYSCALLS is not set
> # CONFIG_BOOT_TRACER is not set
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_PROFILE_ALL_BRANCHES is not set
> # CONFIG_POWER_TRACER is not set
> # CONFIG_KSYM_TRACER is not set
> # CONFIG_STACK_TRACER is not set
> # CONFIG_KMEMTRACE is not set
> # CONFIG_WORKQUEUE_TRACER is not set
> CONFIG_BLK_DEV_IO_TRACE=y
> # CONFIG_FTRACE_STARTUP_TEST is not set
> # CONFIG_MMIOTRACE is not set
> # CONFIG_RING_BUFFER_BENCHMARK is not set
> CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
> # CONFIG_DYNAMIC_DEBUG is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_STRICT_DEVMEM is not set
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_DBGP=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> CONFIG_DEBUG_STACK_USAGE=y
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> # CONFIG_DEBUG_RODATA_TEST is not set
> CONFIG_DEBUG_NX_TEST=m
> # CONFIG_4KSTACKS is not set
> CONFIG_DOUBLEFAULT=y
> # CONFIG_IOMMU_STRESS is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> CONFIG_DEBUG_BOOT_PARAMS=y
> # CONFIG_CPA_DEBUG is not set
> CONFIG_OPTIMIZE_INLINING=y
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_DEBUG_PROC_KEYS=y
> CONFIG_SECURITY=y
> # CONFIG_SECURITYFS is not set
> CONFIG_SECURITY_NETWORK=y
> # CONFIG_SECURITY_NETWORK_XFRM is not set
> # CONFIG_SECURITY_PATH is not set
> CONFIG_SECURITY_FILE_CAPABILITIES=y
> CONFIG_SECURITY_SELINUX=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
> CONFIG_SECURITY_SELINUX_DISABLE=y
> CONFIG_SECURITY_SELINUX_DEVELOP=y
> CONFIG_SECURITY_SELINUX_AVC_STATS=y
> CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
> # CONFIG_SECURITY_TOMOYO is not set
> # CONFIG_IMA is not set
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> # CONFIG_CRYPTO_FIPS is not set
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_GF128MUL is not set
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=y
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> # CONFIG_CRYPTO_SEQIV is not set
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> # CONFIG_CRYPTO_CTR is not set
> # CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=y
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_XCBC is not set
>
> #
> # Digest
> #
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA256 is not set
> # CONFIG_CRYPTO_SHA512 is not set
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_586=y
> # CONFIG_CRYPTO_ANUBIS is not set
> CONFIG_CRYPTO_ARC4=y
> # CONFIG_CRYPTO_BLOWFISH is not set
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> CONFIG_CRYPTO_DES=y
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_586 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_TWOFISH_586 is not set
>
> #
> # Compression
> #
> # CONFIG_CRYPTO_DEFLATE is not set
> # CONFIG_CRYPTO_ZLIB is not set
> # CONFIG_CRYPTO_LZO is not set
>
> #
> # Random Number Generation
> #
> # CONFIG_CRYPTO_ANSI_CPRNG is not set
> CONFIG_CRYPTO_HW=y
> # CONFIG_CRYPTO_DEV_PADLOCK is not set
> # CONFIG_CRYPTO_DEV_GEODE is not set
> # CONFIG_CRYPTO_DEV_HIFN_795X is not set
> CONFIG_HAVE_KVM=y
> CONFIG_HAVE_KVM_IRQCHIP=y
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> # CONFIG_LGUEST is not set
> # CONFIG_VIRTIO_PCI is not set
> # CONFIG_VIRTIO_BALLOON is not set
> CONFIG_BINARY_PRINTF=y
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_GENERIC_FIND_LAST_BIT=y
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC_T10DIF=y
> # CONFIG_CRC_ITU_T is not set
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> # CONFIG_LIBCRC32C is not set
> CONFIG_AUDIT_GENERIC=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_NLATTR=y
> CONFIG_FORCE_SUCCESSFUL_BUILD=y
> CONFIG_FORCE_MINIMAL_CONFIG=y
> CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
> CONFIG_X86_32_ALWAYS_ON=y
next prev parent reply other threads:[~2009-08-09 18:30 UTC|newest]
Thread overview: 1150+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-24 8:09 [patch] perf tools: allow top users to switch between weighted and individual counter display Mike Galbraith
2009-07-24 8:58 ` Peter Zijlstra
2009-07-24 10:37 ` Mike Galbraith
2009-08-02 20:00 ` Ingo Molnar
2009-08-03 5:09 ` Mike Galbraith
2009-08-04 8:21 ` Mike Galbraith
2009-08-04 8:24 ` [patch] perf tools: update perf top man page Mike Galbraith
[not found] ` <new-submission>
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: stop command line recording when tracing is disabled Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: replace the crude (unsigned) -1 hackery Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix trace_find_cmdline() Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix command line to pid reverse map Carsten Emde
2009-03-29 22:24 ` [tip:x86/mm] x86/mm: further cleanups of fault.c's include file section Ingo Molnar
2009-03-30 12:06 ` Ingo Molnar
2009-04-01 10:15 ` [tip:perfcounters/core] perf_counter tools: kerneltop: add real-time data acquisition thread Mike Galbraith
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: round-robin per-CPU counters too tip-bot for Ingo Molnar
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: initialize the per-cpu context earlier tip-bot for Ingo Molnar
2009-05-04 17:34 ` [tip:perfcounters/core] perf_counter: convert perf_resource_mutex to a spinlock tip-bot for Ingo Molnar
[not found] ` <tip-48dd0fed90e2b1f1ba87401439b85942181c6df3@git.kernel.org>
2009-05-06 14:24 ` [tip:tracing/core] tracing: trace_output.c, fix false positive compiler warning Steven Rostedt
2009-05-06 14:36 ` Ingo Molnar
2009-05-06 14:49 ` Steven Rostedt
2009-05-06 14:51 ` [tip:tracing/core] tracing: small trave_events sample Makefile cleanup tip-bot for Christoph Hellwig
2009-05-07 9:19 ` [tip:x86/cleanups] x86: clean up arch/x86/kernel/tsc_sync.c a bit tip-bot for Ingo Molnar
2009-05-11 9:53 ` [tip:x86/apic] x86: apic: Check rev 3 fadt correctly for physical_apic bit tip-bot for Yinghai Lu
2009-05-11 9:53 ` [tip:x86/cpufeature] x86: clean up and fix setup_clear/force_cpu_cap handling tip-bot for Yinghai Lu
2009-05-11 10:10 ` [tip:perfcounters/core] perf_counter, x86: clean up throttling printk tip-bot for Mike Galbraith
2009-05-12 14:33 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES tip-bot for Ingo Molnar
2009-05-12 18:27 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS tip-bot for Ingo Molnar
2009-05-13 6:21 ` [tip:perfcounters/core] perf_counter: fix print debug irq disable tip-bot for Peter Zijlstra
2009-05-13 13:52 ` [tip:x86/urgent] xen: use header for EXPORT_SYMBOL_GPL tip-bot for Randy Dunlap
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: More accurate counter update tip-bot for Peter Zijlstra
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Fix throttling tip-bot for Ingo Molnar
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Allow unpriviliged use of NMIs tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Fix perf_output_copy() WARN to account for overflow tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Fix up the amd NMI/INT throttle tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Rework the perf counter disable/enable tip-bot for Peter Zijlstra
2009-05-15 11:05 ` Paul Mackerras
2009-05-15 11:23 ` Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Robustify interrupt handling tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Disallow interval of 1 tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: x86: Protect against infinite loops in intel_pmu_handle_irq() tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: Remove ACPI quirk tip-bot for Ingo Molnar
2009-05-15 10:12 ` [tip:perfcounters/core] perf stat: handle Ctrl-C tip-bot for Ingo Molnar
2009-05-28 11:09 ` Paul Mackerras
2009-05-28 12:19 ` Peter Zijlstra
2009-05-29 9:06 ` Ingo Molnar
2009-05-18 7:40 ` [tip:perfcounters/core] perf_counter, x86: speed up the scheduling fast-path tip-bot for Ingo Molnar
2009-05-20 18:15 ` [tip:perfcounters/core] perf_counter: Fix context removal deadlock tip-bot for Ingo Molnar
2009-05-22 16:21 ` [tip:perfcounters/core] perf_counter tools: increase limits tip-bot for Ingo Molnar
2009-05-24 7:02 ` [tip:perfcounters/core] perf top: fix segfault tip-bot for Mike Galbraith
2009-05-25 3:39 ` [tip:perfcounters/core] perf_counter: Increase mmap limit tip-bot for Ingo Molnar
2009-05-25 8:03 ` [tip:perfcounters/core] perf_counter tools: increase limits, fix tip-bot for Ingo Molnar
2009-05-25 11:03 ` [tip:perfcounters/core] perf top: Reduce display overhead tip-bot for Mike Galbraith
2009-05-25 11:06 ` [tip:perfcounters/core] perf_counter: Move child perfcounter init to after scheduler init tip-bot for Ingo Molnar
2009-05-25 12:45 ` [tip:perfcounters/core] perf stat: flip around ':k' and ':u' flags tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Fix APIC NMI programming tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Make NMI lockups more robust tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter: Initialize ->oncpu properly tip-bot for Ingo Molnar
2009-05-26 10:33 ` [tip:perfcounters/core] perf record: Straighten out argv types tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf stat: Remove unused variable tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf_counter tools: Librarize event string parsing tip-bot for Ingo Molnar
2009-05-26 11:03 ` [tip:perfcounters/core] perf stat: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 11:36 ` [tip:perfcounters/core] perf top: " tip-bot for Ingo Molnar
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter: First part of 'perf report' conversion to C + elfutils tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter tools: remove the standalone perf-report utility tip-bot for Ingo Molnar
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Implement dso__load using libelf tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_trees in perf report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Add our private copy of list.h tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_tree for symhists and threads in report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:14 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 12:15 ` [tip:perfcounters/core] perf report: Add help/manpage tip-bot for Ingo Molnar
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: Remove leftover NMI/IRQ bits tip-bot for Mike Galbraith
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: fix typo in -d option tip-bot for Mike Galbraith
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix ELF symbol parsing tip-bot for Peter Zijlstra
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix kernel symbol resolution tip-bot for Arnaldo Carvalho de Melo
2009-05-26 15:21 ` [PATCH 1/1 tip] perf: Don't assume /proc/kallsyms is ordered Arnaldo Carvalho de Melo
2009-05-26 15:39 ` [tip:perfcounters/core] " tip-bot for Arnaldo Carvalho de Melo
2009-05-26 17:56 ` [PATCH 1/1 tip] " Peter Zijlstra
2009-05-26 17:54 ` [tip:perfcounters/core] perf report: add --dump-raw-trace option tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add counter for unknown events tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add more debugging tip-bot for Ingo Molnar
2009-05-26 18:21 ` tip-bot for Ingo Molnar
2009-05-26 19:21 ` [tip:perfcounters/core] perf report: More robust error handling tip-bot for Peter Zijlstra
2009-05-27 7:36 ` [tip:perfcounters/core] perf_counter tools: Rename output.perf to perf.data tip-bot for Ingo Molnar
2009-05-27 9:06 ` [tip:perfcounters/core] perf_counter tools: Add built-in pager support tip-bot for Ingo Molnar
2009-05-27 10:33 ` [tip:perfcounters/core] perf record: Fix the profiling of existing pid or whole box tip-bot for Mike Galbraith
2009-05-27 11:24 ` [tip:perfcounters/core] perf report: Remove <ctype.h> include tip-bot for Ingo Molnar
2009-05-27 13:03 ` [tip:perfcounters/core] perf_counter: tools: /usr/lib/debug%s.debug support tip-bot for Peter Zijlstra
2009-05-27 21:25 ` [tip:perfcounters/core] pref_counter: tools: report: Robustify in case of weird events tip-bot for Ingo Molnar
2009-05-28 9:46 ` [tip:perfcounters/core] perf_counter: Fix perf_counter_init_task() on !CONFIG_PERF_COUNTERS tip-bot for Ingo Molnar
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Implement header output for --sort variants tip-bot for Peter Zijlstra
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Add help text for --sort tip-bot for Ingo Molnar
2009-05-28 22:03 ` [tip:perfcounters/core] perf_counter tools: Document '--' option parsing terminator tip-bot for Mike Galbraith
2009-05-29 7:06 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table dump typo tip-bot for Mike Galbraith
2009-05-29 7:07 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table max_ip typo tip-bot for Mike Galbraith
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Clean up builtin-stat.c's do_perfstat() tip-bot for Ingo Molnar
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Split display into reading and printing tip-bot for Ingo Molnar
2009-05-29 9:01 ` [tip:perfcounters/core] perf_counter tools: Also display time-normalized stat results tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Fix cpuctx->task_ctx races tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Robustify counter-free logic tip-bot for Ingo Molnar
2009-05-29 17:15 ` [tip:sched/core] ftrace: fix typo about map of kernel priority in ftrace.txt file tip-bot for GeunSik Lim
2009-05-29 17:15 ` [tip:sched/core] sched: fix typo in sched-rt-group.txt file tip-bot for GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Fix COMM and MMAP events for cpu wide counters tip-bot for Peter Zijlstra
2009-05-30 0:15 ` GeunSik Lim
2009-05-30 0:23 ` Yinghai Lu
2009-05-30 9:40 ` Ingo Molnar
2009-05-30 11:27 ` GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Clean up task_ctx vs interrupts tip-bot for Peter Zijlstra
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Ammend cleanup in fork() fail tip-bot for Peter Zijlstra
2009-05-30 11:45 ` [tip:perfcounters/core] perf_counter tools: Print 'CPU utilization factor' in builtin-stat tip-bot for Ingo Molnar
2009-05-30 11:51 ` [tip:perfcounters/core] perf_counter tools: Fix 'make install' tip-bot for Ingo Molnar
2009-05-30 13:00 ` [tip:perfcounters/core] perf_counter tools: Generate per command manpages (and pdf/html, etc.) tip-bot for Ingo Molnar
2009-05-30 13:46 ` Sam Ravnborg
2009-05-30 14:47 ` Ingo Molnar
2009-05-30 15:37 ` Jaswinder Singh Rajput
2009-05-30 16:38 ` Sam Ravnborg
2009-05-30 17:23 ` Ingo Molnar
2009-05-31 20:16 ` [tip:perfcounters/core] perf_counter tools: Fix unknown command help text tip-bot for Ingo Molnar
2009-06-01 8:19 ` [tip:perfcounters/core] perf_counter: Tidy up style details tip-bot for Ingo Molnar
2009-06-01 17:57 ` tip-bot for Ingo Molnar
2009-06-01 18:22 ` Frans Pop
2009-06-01 18:43 ` Ingo Molnar
2009-06-01 18:42 ` [tip:perfcounters/core] perf_counter tools: Guard against record damaging existing files tip-bot for Mike Galbraith
2009-06-02 1:45 ` [tip:perfcounters/core] perf_counter tools: Add string.[ch] tip-bot for Arnaldo Carvalho de Melo
2009-06-02 8:25 ` [tip:perfcounters/core] perf_counter tools: Make .gitignore reflect perf_counter tools files tip-bot for Mike Galbraith
2009-06-02 9:03 ` [tip:perfcounters/core] perf_counter tools: Cleanup Makefile tip-bot for Mike Galbraith
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: Use PID namespaces properly tip-bot for Peter Zijlstra
2009-06-02 15:55 ` Oleg Nesterov
2009-06-02 16:28 ` Peter Zijlstra
2009-06-02 16:30 ` Oleg Nesterov
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Expand the COMM,MMAP event synthesizer tip-bot for Peter Zijlstra
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Better handle existing data files tip-bot for Peter Zijlstra
2009-06-02 14:42 ` [tip:perfcounters/core] perf report: Clean up the default output tip-bot for Ingo Molnar
2009-06-02 20:15 ` [tip:perfcounters/core] perf_counter tools: Remove the last nmi bits tip-bot for Peter Zijlstra
2009-06-02 20:15 ` [tip:perfcounters/core] x86: Fix atomic_long_xchg() on 64bit tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Add unique counter id tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Rename various fields tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Remove the last nmi/irq bits tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: x86: Emulate longer sample periods tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Change data head from u32 to u64 tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Add ioctl for changing the sample period/frequency tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Rename perf_counter_hw_event => perf_counter_attr tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter tools: Fix up the ABI shakeup tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Separate out idle threads tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Fix column width/alignment of dsos tip-bot for Ingo Molnar
2009-06-02 22:07 ` [tip:perfcounters/core] perf record: Add --append option tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf record: Increase mmap buffering default tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf report: Print more info instead of <unknown> entries tip-bot for Ingo Molnar
2009-06-02 22:42 ` [tip:perfcounters/core] perf_counter tools: Make source code headers more coherent tip-bot for Ingo Molnar
2009-06-02 22:49 ` [tip:perfcounters/core] perf record: Print out the number of events captured tip-bot for Ingo Molnar
2009-06-03 8:46 ` [tip:perfcounters/core] perf_counter tools: Cover PLT symbols too tip-bot for Arnaldo Carvalho de Melo
2009-06-03 8:46 ` [tip:perfcounters/core] perf report: Print -D to stdout tip-bot for Ingo Molnar
2009-06-03 9:48 ` tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Improve sort key recognition tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Handle vDSO symbols properly tip-bot for Ingo Molnar
2009-06-03 13:06 ` [tip:perfcounters/core] perf_counter: Add a comm hook for pure fork()s tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf record: Use long arg for counter period tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf report: Fix comm sorting tip-bot for Peter Zijlstra
2009-06-03 13:07 ` [tip:perfcounters/core] perf_counter: Fix race in counter initialization tip-bot for Peter Zijlstra
2009-06-03 18:24 ` [tip:perfcounters/core] perf_counter tools: Clean up old kerneltop references tip-bot for Ingo Molnar
2009-06-03 18:33 ` [tip:perfcounters/core] perf record: Refine capture printout tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf report: Display 100% correctly tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf stat: Print out all arguments tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf report: Add front-entry cache for lookups tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf help: Fix bug when there's no perf-* command around tip-bot for Ingo Molnar
2009-06-03 19:21 ` [tip:perfcounters/core] perf_counter tools: Optimize harder tip-bot for Ingo Molnar
2009-06-03 21:42 ` [tip:perfcounters/core] perf_counter: Fix throttling lock-up tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Clean up event processing tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Split out event processing helpers tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Handle all known event types tip-bot for Ingo Molnar
2009-06-04 7:33 ` [tip:perfcounters/core] perf report: Fix rbtree bug tip-bot for Arnaldo Carvalho de Melo
2009-06-04 8:06 ` [tip:perfcounters/core] perf top: Reduce default filter threshold tip-bot for Ingo Molnar
2009-06-04 12:48 ` [tip:perfcounters/core] perf record/report: Fix PID/COMM handling tip-bot for Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf_counter tools: Build with native optimization tip-bot for Ingo Molnar
2009-06-05 1:03 ` Paul Mackerras
2009-06-05 18:42 ` Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf report: Simplify symbol output tip-bot for Peter Zijlstra
2009-06-04 13:21 ` [tip:perfcounters/core] perf_counter tools: Print out symbol parsing errors only if --verbose tip-bot for Ingo Molnar
2009-06-04 13:27 ` [tip:perfcounters/core] perf report: Print out the total number of events tip-bot for Ingo Molnar
2009-06-04 13:30 ` [tip:perfcounters/core] perf report: Add consistent spacing rules tip-bot for Peter Zijlstra
2009-06-04 14:09 ` tip-bot for Peter Zijlstra
2009-06-04 14:33 ` [tip:perfcounters/core] perf_counter tools: Add color terminal output support tip-bot for Ingo Molnar
2009-06-04 14:51 ` [tip:perfcounters/core] perf_counter tools: Dont output in color on !tty tip-bot for Ingo Molnar
2009-06-04 15:30 ` [tip:perfcounters/core] perf report: Bail out if there are unrecognized options/arguments tip-bot for Ingo Molnar
2009-06-04 15:39 ` [tip:perfcounters/core] perf stat: Update help text tip-bot for Ingo Molnar
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Add fork event tip-bot for Peter Zijlstra
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Remove munmap stuff tip-bot for Peter Zijlstra
2009-06-04 16:01 ` [tip:perfcounters/core] perf_counter tools: Use fork and remove munmap events tip-bot for Peter Zijlstra
2009-06-05 12:45 ` [tip:perfcounters/core] perf record: Split out counter creation into a helper function tip-bot for Ingo Molnar
2009-06-05 12:45 ` [tip:perfcounters/core] perf record, top: Implement --freq tip-bot for Ingo Molnar
2009-06-05 13:21 ` [tip:perfcounters/core] x86: Set context.vdso before installing the mapping tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf_counter: Generate mmap events for install_special_mapping() tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf report: Deal with maps tip-bot for Peter Zijlstra
2009-06-05 13:57 ` Arnaldo Carvalho de Melo
2009-06-05 14:06 ` Peter Zijlstra
2009-06-05 15:02 ` Arnaldo Carvalho de Melo
2009-06-05 13:22 ` [tip:perfcounters/core] perf report: Display user/kernel differentiator tip-bot for Ingo Molnar
2009-06-05 13:33 ` [tip:perfcounters/core] perf record/top: Clarify events/samples naming tip-bot for Ingo Molnar
2009-06-05 13:42 ` [tip:perfcounters/core] perf_counter tools: " tip-bot for Ingo Molnar
2009-06-05 16:01 ` [tip:perfcounters/core] perf_counter tools: Remove -march=native tip-bot for Ingo Molnar
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Add PERF_SAMPLE_PERIOD tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Fix frequency adjustment for < HZ tip-bot for Peter Zijlstra
2009-06-05 17:12 ` [tip:perfcounters/core] perf_counter tools: Sample and display frequency adjustment changes tip-bot for Ingo Molnar
2009-06-05 18:46 ` [tip:perfcounters/core] perf record: Set frequency correctly tip-bot for Ingo Molnar
2009-06-06 9:46 ` [tip:perfcounters/core] perf_counter: Separate out attr->type from attr->config tip-bot for Ingo Molnar
2009-06-06 11:16 ` [tip:perfcounters/core] perf_counter: Implement generalized cache event types tip-bot for Ingo Molnar
2009-06-09 8:15 ` Peter Zijlstra
2009-06-09 12:15 ` Ingo Molnar
2009-06-06 13:22 ` [tip:perfcounters/core] perf_counter tools: Fix cache-event printout tip-bot for Ingo Molnar
2009-06-06 13:27 ` [tip:perfcounters/core] perf_counter tools: Add help for perf list tip-bot for Thomas Gleixner
2009-06-06 13:48 ` [tip:perfcounters/core] perf_counter tools: Uniform help printouts tip-bot for Ingo Molnar
2009-06-06 14:21 ` [tip:perfcounters/core] perf_counter tools: Tidy up manpage details tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Prepare for 'perf annotate' tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Add 'perf annotate' feature tip-bot for Ingo Molnar
2009-06-06 18:10 ` Frederic Weisbecker
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/ tip-bot for Ingo Molnar
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Warning fixes on 32-bit tip-bot for Arjan van de Ven
2009-06-06 19:21 ` [tip:perfcounters/core] perf annotate: Automatically pick up vmlinux in the local directory tip-bot for Ingo Molnar
2009-06-06 19:24 ` [tip:perfcounters/core] perf_counter tools: Initialize a stack variable before use tip-bot for Arjan van de Ven
2009-06-06 19:27 ` [tip:perfcounters/core] perf annotate: Fix command line help text tip-bot for Ingo Molnar
2009-06-07 15:12 ` [tip:perfcounters/core] perf stat: Continue even on counter creation error tip-bot for Ingo Molnar
2009-06-07 15:36 ` [tip:perfcounters/core] perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available tip-bot for Ingo Molnar
2009-06-07 15:42 ` [tip:perfcounters/core] perf record: Fall back to cpu-clock-ticks if no PMU tip-bot for Ingo Molnar
2009-06-07 15:51 ` [tip:perfcounters/core] perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER tip-bot for Ingo Molnar
2009-06-07 16:00 ` [tip:perfcounters/core] perf report: Print more expressive message in case of file open error tip-bot for Ingo Molnar
2009-06-07 17:21 ` [tip:perfcounters/core] perf stat: Print out instructins/cycle metric tip-bot for Ingo Molnar
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Core2 support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Atom support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter: Clean up x86 boot messages tip-bot for Ingo Molnar
2009-06-08 20:36 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add AMD support tip-bot for Thomas Gleixner
2009-06-09 8:43 ` Peter Zijlstra
2009-06-09 12:01 ` Ingo Molnar
2009-06-08 21:33 ` tip-bot for Thomas Gleixner
2009-06-08 21:33 ` [tip:perfcounters/core] perf_counter tools: Standardize color printing tip-bot for Ingo Molnar
2009-06-10 9:51 ` [tip:core/locking] spinlock: Add missing __raw_spin_lock_flags() stub for UP tip-bot for Benjamin Herrenschmidt
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter: More aggressive frequency adjustment tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Small frequency related fixes tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Propagate signals properly tip-bot for Peter Zijlstra
2009-06-11 0:42 ` [tip:perfcounters/core] perf_counter: Annotate exit ctx recursion tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter tools: Normalize data using per sample period data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Introduce struct for sample data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Accurate period data tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: Remove PERF_TYPE_RAW special casing tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf record: Explicity program a default counter tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf_counter: Add forward/backward attribute ABI compatibility tip-bot for Peter Zijlstra
2009-06-13 14:49 ` [tip:perfcounters/core] perf_counter: Fix stack corruption in perf_read_hw tip-bot for Marti Raudsepp
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Reorganize output tip-bot for Ingo Molnar
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Add feature to run and measure a command multiple times tip-bot for Ingo Molnar
2009-06-13 14:50 ` [tip:perfcounters/core] perf stat: Enable raw data to be printed tip-bot for Ingo Molnar
2009-06-13 18:36 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-14 13:54 ` [tip:perfcounters/core] perf report: Print out raw events in hexa tip-bot for Ingo Molnar
2009-06-14 14:12 ` [tip:perfcounters/core] perf record/report: Add call graph / call chain profiling tip-bot for Ingo Molnar
2009-06-14 18:36 ` tip-bot for Ingo Molnar
2009-06-15 7:14 ` Yong Wang
2009-06-16 2:57 ` Frederic Weisbecker
2009-06-16 8:09 ` Ingo Molnar
2009-06-17 7:37 ` Peter Zijlstra
2009-06-17 12:24 ` Ingo Molnar
2009-06-17 11:41 ` Frederic Weisbecker
2009-06-17 7:29 ` Peter Zijlstra
2009-06-14 20:39 ` [tip:perfcounters/core] perf_counter, x86: Fix call-chain walking tip-bot for Ingo Molnar
2009-06-15 7:24 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 8:03 ` [tip:perfcounters/core] perf_counter, x86: Fix kernel-space call-chains tip-bot for Ingo Molnar
2009-06-15 8:33 ` tip-bot for Ingo Molnar
2009-06-15 8:33 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] x86, mm: Add __get_user_pages_fast() tip-bot for Peter Zijlstra
2009-06-15 14:07 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods tip-bot for Peter Zijlstra
2009-06-15 16:14 ` Mathieu Desnoyers
2009-06-15 17:05 ` Ingo Molnar
2009-06-15 17:42 ` Mathieu Desnoyers
2009-06-15 18:18 ` Ingo Molnar
2009-06-15 17:11 ` Linus Torvalds
2009-06-15 17:18 ` Ingo Molnar
2009-06-15 17:37 ` Linus Torvalds
2009-06-15 18:05 ` Mathieu Desnoyers
2009-06-15 18:23 ` Ingo Molnar
2009-06-15 18:28 ` Ingo Molnar
2009-06-15 18:42 ` Mathieu Desnoyers
2009-06-15 18:47 ` Ingo Molnar
2009-06-15 18:51 ` Linus Torvalds
2009-06-15 19:16 ` Mathieu Desnoyers
2009-06-15 18:38 ` Mathieu Desnoyers
2009-06-15 18:50 ` Ingo Molnar
2009-06-15 18:39 ` H. Peter Anvin
2009-06-15 18:45 ` Ingo Molnar
2009-06-15 18:55 ` H. Peter Anvin
2009-06-15 19:02 ` Avi Kivity
2009-06-16 8:36 ` Ingo Molnar
2009-06-16 8:52 ` Avi Kivity
2009-06-16 10:50 ` Ingo Molnar
2009-06-15 18:30 ` Linus Torvalds
2009-06-15 18:36 ` Ingo Molnar
2009-06-15 18:46 ` Mathieu Desnoyers
2009-06-15 19:04 ` Linus Torvalds
2009-06-15 19:39 ` Mathieu Desnoyers
2009-06-15 19:43 ` Ingo Molnar
2009-06-15 19:51 ` Mathieu Desnoyers
2009-06-15 19:55 ` Ingo Molnar
2009-06-15 20:25 ` Ingo Molnar
2009-06-15 20:04 ` Linus Torvalds
2009-06-15 20:30 ` Ingo Molnar
2009-06-15 20:06 ` Mathieu Desnoyers
2009-06-15 20:10 ` H. Peter Anvin
2009-06-15 20:47 ` Ingo Molnar
2009-06-15 21:02 ` Mathieu Desnoyers
2009-06-15 21:12 ` Ingo Molnar
2009-06-15 21:22 ` Mathieu Desnoyers
2009-06-15 23:22 ` Linus Torvalds
2009-06-19 15:20 ` Ingo Molnar
2009-06-19 15:51 ` Mathieu Desnoyers
2009-06-19 16:16 ` Ingo Molnar
2009-06-16 8:42 ` Ingo Molnar
2009-06-16 15:21 ` H. Peter Anvin
2009-06-15 20:14 ` Jeremy Fitzhardinge
2009-06-15 20:27 ` Linus Torvalds
2009-06-15 20:42 ` H. Peter Anvin
2009-06-15 20:59 ` Ingo Molnar
2009-06-15 21:04 ` H. Peter Anvin
2009-06-15 21:13 ` Ingo Molnar
2009-06-15 22:39 ` Linus Torvalds
2009-06-15 21:06 ` Jeremy Fitzhardinge
2009-06-15 18:08 ` Ingo Molnar
2009-06-15 18:38 ` H. Peter Anvin
2009-06-15 18:48 ` Mathieu Desnoyers
2009-06-15 18:51 ` Peter Zijlstra
2009-06-15 18:59 ` Mathieu Desnoyers
2009-06-15 19:02 ` Peter Zijlstra
2009-06-15 19:11 ` H. Peter Anvin
2009-06-15 19:27 ` Mathieu Desnoyers
2009-06-15 19:32 ` H. Peter Anvin
2009-06-15 21:01 ` Ingo Molnar
2009-06-15 21:12 ` Mathieu Desnoyers
2009-06-15 21:16 ` Ingo Molnar
2009-06-15 21:34 ` Mathieu Desnoyers
2009-06-15 21:38 ` H. Peter Anvin
2009-06-15 21:54 ` Mathieu Desnoyers
2009-06-15 22:21 ` H. Peter Anvin
2009-06-15 22:30 ` Mathieu Desnoyers
2009-06-15 22:36 ` H. Peter Anvin
2009-06-15 22:49 ` Mathieu Desnoyers
2009-06-16 1:28 ` H. Peter Anvin
2009-06-16 3:05 ` Mathieu Desnoyers
2009-06-16 8:33 ` Ingo Molnar
2009-06-16 14:19 ` Mathieu Desnoyers
2009-06-16 15:22 ` H. Peter Anvin
2009-06-16 19:06 ` Mathieu Desnoyers
2009-06-16 20:26 ` H. Peter Anvin
2009-06-16 21:13 ` Mathieu Desnoyers
2009-06-16 22:37 ` H. Peter Anvin
2009-06-16 8:36 ` [tip:x86/urgent] x86: mm: Read cr2 before prefetching the mmap_lock tip-bot for Ingo Molnar
2009-06-16 17:54 ` Linus Torvalds
2009-06-15 19:16 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods Avi Kivity
2009-06-15 19:18 ` H. Peter Anvin
2009-06-15 19:03 ` Ingo Molnar
2009-06-15 19:07 ` Ingo Molnar
2009-06-15 19:10 ` Peter Zijlstra
2009-06-15 19:21 ` Avi Kivity
2009-06-15 20:18 ` Jeremy Fitzhardinge
2009-06-15 19:59 ` Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] perf report: Add per system call overhead histogram tip-bot for Ingo Molnar
2009-06-15 14:21 ` [tip:perfcounters/core] perf report: Fix 32-bit printf format tip-bot for Ingo Molnar
2009-06-16 19:54 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 11:51 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-17 14:06 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf report: Add --sort <call> --call <$regex> tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter: x86: Set the period in the intel overflow handler tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter tools: Replace isprint() with issane() tip-bot for Peter Zijlstra
2009-06-18 6:09 ` [tip:perfcounters/core] perf report: Tidy up the --collapse call-chain feature tip-bot for Ingo Molnar
2009-06-18 6:27 ` [tip:perfcounters/core] perf report: Tidy up the "--parent <regex>" and "--sort parent" call-chain features tip-bot for Ingo Molnar
2009-06-18 7:21 ` [tip:perfcounters/core] perf report: Add validation of call-chain entries tip-bot for Ingo Molnar
2009-06-18 7:45 ` [tip:perfcounters/core] perf_counter tools: Add and use isprint() tip-bot for Peter Zijlstra
2009-06-18 7:48 ` tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] fs: Provide empty .set_page_dirty() aop for anon inodes tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter: Add event overlow handling tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter tools: Handle lost events tip-bot for Peter Zijlstra
2009-06-18 21:17 ` Corey Ashford
2009-06-18 13:39 ` [tip:perfcounters/core] perf report: Filter to parent set by default tip-bot for Ingo Molnar
2009-06-19 11:51 ` [tip:perfcounters/core] perf_counter: Make callchain samples extensible tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Update userspace callchain sampling uses tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter tools: Add a data file header tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Simplify and fix task migration counting tip-bot for Peter Zijlstra
2009-06-19 11:59 ` Peter Zijlstra
2009-06-19 12:24 ` Paul Mackerras
2009-06-19 12:39 ` Peter Zijlstra
2009-06-19 12:26 ` Peter Zijlstra
2009-06-19 16:27 ` [tip:perfcounters/core] perf_counter: Close race in perf_lock_task_context() tip-bot for Peter Zijlstra
2009-06-20 11:27 ` [tip:perfcounters/core] perf_counter: Push perf_sample_data through the swcounter code tip-bot for Peter Zijlstra
2009-06-21 8:15 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-21 13:09 ` [tip:perfcounters/urgent] perf_counter tools: Fix vmlinux fallback when running on a different kernel tip-bot for Ingo Molnar
2009-06-22 15:00 ` [tip:perfcounters/urgent] perf report: Output more symbol related debug data tip-bot for Peter Zijlstra
2009-06-22 15:03 ` tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter tools: Handle overlapping MMAP events tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_swcounter_event() tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Push inherit into perf_counter_alloc() tip-bot for Peter Zijlstra
2009-06-23 10:04 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_counter_alloc()'s inherit case tip-bot for Peter Zijlstra
2009-06-23 14:42 ` [tip:perfcounters/urgent] perf report: Fix help text typo tip-bot for Ingo Molnar
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter tools: Rework the file format tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Split the mmap control page in two parts tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Add scale information to the mmap control page tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter, x86: Add mmap counter read support tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Add PERF_EVENT_READ tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Implement more accurate per task statistics tip-bot for Peter Zijlstra
2009-06-26 11:10 ` [RFC][PATCH] perf_counter: Complete counter swap Peter Zijlstra
2009-06-26 12:44 ` Paul Mackerras
2009-06-26 15:52 ` [tip:perfcounters/urgent] " tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Rework the sample ABI tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf-report: Add modes for inherited stats and no-samples tip-bot for Peter Zijlstra
2009-06-25 19:44 ` [tip:perfcounters/urgent] perf-report: Add bare minimum PERF_EVENT_READ parsing tip-bot for Peter Zijlstra
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf_counter tools: Remove dead code tip-bot for Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Add -n/--null option to run without counters tip-bot for Ingo Molnar
2009-06-27 7:56 ` Jaswinder Singh Rajput
2009-06-27 16:52 ` Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Fix multi-run stats tip-bot for Ingo Molnar
2009-06-27 4:36 ` tip-bot for Ingo Molnar
2009-06-27 8:26 ` Jaswinder Singh Rajput
2009-06-27 16:45 ` Ingo Molnar
2009-06-29 19:54 ` [tip:perfcounters/urgent] perf stat: Use percentages for scaling output tip-bot for Ingo Molnar
2009-07-01 10:55 ` [tip:perfcounters/urgent] perf_counter tools: Add more warnings and fix/annotate them tip-bot for Ingo Molnar
2009-07-03 6:27 ` [tip:perfcounters/urgent] perf_counter tools: Adjust symbols in ET_EXEC files too tip-bot for Arnaldo Carvalho de Melo
2009-07-07 12:07 ` [tip:timers/core] timekeeping: Move ktime_get() functions to timekeeping.c tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: always subtract base->offset tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: do not check expiry time on current CPU tip-bot for Thomas Gleixner
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Fix up P6 PMU details tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Clean up global vs counter enable tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Stop open coding unclone_ctx tip-bot for Peter Zijlstra
2009-07-11 9:57 ` [tip:x86/cleanups] x86/cpu: Clean up various files a bit tip-bot for Alan Cox
2009-07-11 11:00 ` Jaswinder Singh Rajput
2009-07-11 11:09 ` Jaswinder Singh Rajput
2009-07-11 14:10 ` Alan Cox
2009-07-13 6:49 ` [tip:perfcounters/core] perf_counter, x86: Extend perf_counter Pentium M support tip-bot for Daniel Qarras
2009-07-18 9:49 ` [tip:sched/urgent] sched: Account for vruntime wrapping tip-bot for Fabio Checconi
2009-07-21 12:36 ` [tip:irq/urgent] genirq: Delegate irq affinity setting to the irq thread tip-bot for Thomas Gleixner
2009-07-22 15:15 ` [tip:timers/core] hrtimer: Remove cb_entry from struct hrtimer tip-bot for Peter Zijlstra
2009-07-24 6:46 ` [tip:x86/urgent] x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure tip-bot for Thomas Gleixner
2009-08-01 11:22 ` [tip:perfcounters/urgent] perf_counter tools: Fix link errors with older toolchains tip-bot for Ingo Molnar
2009-08-02 13:03 ` [tip:core/locking] lockdep: Fix BFS build tip-bot for Ingo Molnar
2009-08-02 13:09 ` [tip:core/debug] debug lockups: Improve lockup detection tip-bot for Ingo Molnar
2009-08-02 17:18 ` Paul E. McKenney
2009-08-02 18:45 ` Andrew Morton
2009-08-02 19:26 ` Ingo Molnar
2009-08-02 19:39 ` Andrew Morton
2009-08-02 20:41 ` Ingo Molnar
2009-08-02 21:08 ` Andrew Morton
2009-08-03 7:59 ` Ingo Molnar
2009-08-03 8:12 ` [tip:core/debug] debug lockups: Improve lockup detection, fix generic arch fallback tip-bot for Ingo Molnar
2009-08-02 20:46 ` [tip:core/debug] debug lockups: Improve lockup detection Ingo Molnar
2009-08-02 13:10 ` [tip:perfcounters/core] perf_counter: Collapse inherit on read() tip-bot for Peter Zijlstra
2009-08-02 13:13 ` [tip:sched/core] sched: Add debug check to task_of() tip-bot for Peter Zijlstra
2009-08-02 18:36 ` [tip:core/rcu] rcu: Fix RCU & CPU hotplug hang tip-bot for Paul E. McKenney
2009-08-02 19:40 ` [tip:core/rcu] rcu: Add diagnostic check for a possible CPU-hotplug race tip-bot for Paul E. McKenney
2009-08-02 20:27 ` Ingo Molnar
2009-08-02 22:13 ` Paul E. McKenney
2009-08-03 5:15 ` Paul E. McKenney
2009-08-03 7:04 ` Ingo Molnar
2009-08-03 12:56 ` Paul E. McKenney
2009-08-06 1:26 ` Paul E. McKenney
2009-08-06 2:51 ` Gautham R Shenoy
2009-08-06 12:29 ` Ingo Molnar
2009-08-06 13:59 ` Paul E. McKenney
2009-08-08 14:57 ` [tip:core/rcu] rcu: Add second " tip-bot for Paul E. McKenney
2009-08-08 15:01 ` Ingo Molnar
2009-08-08 23:21 ` Paul E. McKenney
2009-08-09 10:54 ` tip-bot for Paul E. McKenney
2009-08-09 11:00 ` Ingo Molnar
2009-08-09 11:10 ` Ingo Molnar
2009-08-09 18:30 ` Paul E. McKenney [this message]
2009-08-09 19:23 ` Paul E. McKenney
2009-08-04 8:18 ` [tip:core/rcu] rcu: Add " Gautham R Shenoy
2009-08-04 8:20 ` Ingo Molnar
2009-08-04 11:01 ` Ingo Molnar
2009-08-04 15:37 ` Paul E. McKenney
2009-08-04 5:47 ` Gautham R Shenoy
2009-08-03 13:22 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-08-03 13:24 ` Ingo Molnar
2009-08-03 14:24 ` Peter Zijlstra
2009-08-04 11:37 ` [tip:perfcounters/core] perf top: Update man page tip-bot for Mike Galbraith
2009-08-04 11:37 ` [tip:perfcounters/urgent] perf_counter tools: Provide default bfd_demangle() function in case it's not around tip-bot for Ingo Molnar
2009-08-04 16:21 ` tip-bot for Ingo Molnar
2009-08-06 12:57 ` [tip:perfcounters/urgent] perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink tip-bot for Arnaldo Carvalho de Melo
2009-08-06 18:27 ` tip-bot for Arnaldo Carvalho de Melo
2009-08-11 11:33 ` [tip:perfcounters/urgent] perf_counter, x86: Fix lapic printk message tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix generic cache events on P6-mobile CPUs tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix/improve apic fallback tip-bot for Ingo Molnar
2009-08-11 16:23 ` Johannes Stezenbach
2009-08-11 16:52 ` Ingo Molnar
2009-08-12 12:18 ` tip-bot for Ingo Molnar
2009-08-12 15:51 ` [tip:irq/urgent] genirq: Prevent race between free_irq() and handle_IRQ_event() tip-bot for Thomas Gleixner
2009-08-13 8:39 ` [tip:perfcounters/core] perf_counter: Provide hw_perf_counter_setup_online() APIs tip-bot for Ingo Molnar
2009-08-13 22:05 ` [tip:tracing/core] tracing: Fix syscall tracing on !HAVE_FTRACE_SYSCALLS architectures tip-bot for Ingo Molnar
2009-08-16 8:57 ` [tip:perfcounters/core] perf: Enable more compiler warnings tip-bot for Ingo Molnar
2009-08-16 12:46 ` Frederic Weisbecker
2009-08-16 14:01 ` Ingo Molnar
2009-08-16 14:06 ` Frederic Weisbecker
2009-08-16 15:22 ` Ingo Molnar
2009-08-16 12:53 ` [PATCH] perf tools: Revert the -Wswitch-enum flag Frederic Weisbecker
2009-08-16 14:15 ` [tip:perfcounters/core] perf: Enable more compiler warnings Frederic Weisbecker
2009-08-16 15:18 ` Ingo Molnar
2009-08-16 15:52 ` [PATCH] perf tools: Substract -Wformat-nonliteral from Wformat=2 in extra flags Frederic Weisbecker
2009-08-16 16:00 ` [tip:perfcounters/core] " tip-bot for Frederic Weisbecker
2009-08-16 9:18 ` [tip:perfcounters/core] perf: Build with stack-protector and with -D_FORTIFY_SOURCE=2 tip-bot for Ingo Molnar
2009-08-17 8:46 ` [tip:perfcounters/urgent] perf: Rename perf-examples.txt to examples.txt tip-bot for Carlos R. Mafra
2009-08-18 9:15 ` [tip:perfcounters/core] perf tools: Remove obsolete defines tip-bot for Ingo Molnar
2009-08-18 9:39 ` [tip:perfcounters/urgent] perf_counter: Fix the PARISC build tip-bot for Ingo Molnar
2009-08-18 12:06 ` [tip:perfcounters/urgent] perf annotate: Fix segmentation fault tip-bot for Ingo Molnar
2009-08-21 11:07 ` [tip:tracing/urgent] tracing: Fix too large stack usage in do_one_initcall() tip-bot for Ingo Molnar
2009-08-21 11:14 ` Ingo Molnar
2009-08-21 11:37 ` Peter Zijlstra
2009-08-21 11:58 ` Ingo Molnar
2009-08-21 17:48 ` Andrew Morton
2009-08-21 18:13 ` Linus Torvalds
2009-08-21 18:30 ` Steven Rostedt
2009-08-21 19:02 ` Ingo Molnar
2009-08-21 19:13 ` Linus Torvalds
2009-08-21 19:19 ` Linus Torvalds
2009-08-21 19:17 ` Ingo Molnar
2009-08-21 19:37 ` Steven Rostedt
2009-08-21 16:05 ` Linus Torvalds
2009-08-21 16:22 ` Ingo Molnar
2009-08-21 18:33 ` Arjan van de Ven
2009-08-21 19:18 ` [tip:timers/core] x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown tip-bot for Thomas Gleixner
2009-08-22 10:35 ` Ingo Molnar
2009-08-22 21:14 ` Martin Schwidefsky
2009-08-27 14:43 ` [tip:sched/clock] init: Move sched_clock_init after late_time_init tip-bot for Thomas Gleixner
2009-08-28 11:51 ` [tip:perfcounters/urgent] perf_counters: Increase paranoia level tip-bot for Ingo Molnar
2009-08-28 18:34 ` [tip:timers/core] clocksource: Resolve cpu hotplug dead lock with TSC unstable tip-bot for Thomas Gleixner
2009-08-31 8:19 ` Martin Schwidefsky
2009-08-31 14:38 ` Ingo Molnar
2009-08-31 15:59 ` Thomas Gleixner
2009-09-03 18:17 ` [boot crash] " Ingo Molnar
2009-09-03 18:21 ` Ingo Molnar
2009-09-03 18:58 ` Ingo Molnar
2009-09-08 21:43 ` john stultz
2009-09-02 6:25 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-09-02 7:01 ` tip-bot for Peter Zijlstra
2009-09-02 7:15 ` tip-bot for Peter Zijlstra
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Clean up warnings list in the Makefile tip-bot for Ingo Molnar
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Work around strict aliasing related warnings tip-bot for Ingo Molnar
2009-09-02 19:31 ` [tip:perfcounters/core] perf trace: Sample the CPU too tip-bot for Ingo Molnar
2009-09-02 21:44 ` Frederic Weisbecker
2009-09-02 21:54 ` Ingo Molnar
2009-09-03 1:52 ` Frederic Weisbecker
2009-09-02 19:51 ` [tip:perfcounters/core] perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access tip-bot for Ingo Molnar
2009-09-03 1:11 ` Li Zefan
2009-09-03 6:47 ` Ingo Molnar
2009-09-03 6:46 ` tip-bot for Ingo Molnar
2009-09-03 11:09 ` [tip:perfcounters/core] perf trace: Sample timestamps as well tip-bot for Ingo Molnar
2009-09-03 13:48 ` tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf trace: Fix parsing of perf.data tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf tools: Seek to the end of the header area tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Print out in nanoseconds tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Fix read_string() tip-bot for Ingo Molnar
2009-09-03 16:55 ` [tip:perfcounters/core] perf_counter: Fix output-sharing error path tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Clean up topology.h tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_BALANCE_NEWIDLE tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_WAKE_IDLE for 'close' domains tip-bot for Ingo Molnar
2009-09-04 15:42 ` [tip:perfcounters/core] perf stat: Change noise calculation to use stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Remove the limit on repeat tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Use stddev_mean in stead of stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: More advanced variance computation tip-bot for Peter Zijlstra
2009-09-04 18:34 ` [tip:perfcounters/core] perf stat: Clean up statistics calculations a bit more tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Remove short cut from select_task_rq_fair() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Deal with low-load in wake_affine() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: enable SD_WAKE_IDLE tip-bot for Peter Zijlstra
2009-09-08 11:19 ` [tip:sched/core] sched: Ensure that a child can't gain time over it's parent after fork() tip-bot for Mike Galbraith
2009-09-08 11:49 ` Ingo Molnar
2009-09-08 11:53 ` Jens Axboe
2009-09-08 12:42 ` Mike Galbraith
2009-09-14 20:04 ` [tip:timers/core] clocksource: clocksource_select must be called with mutex locked tip-bot for Thomas Gleixner
2009-09-14 20:04 ` [tip:timers/core] clocksource: Delay clocksource down rating to late boot tip-bot for Thomas Gleixner
2009-09-15 8:22 ` [tip:timers/core] time: Prevent 32 bit overflow with set_normalized_timespec() tip-bot for Thomas Gleixner
2009-09-15 9:30 ` [tip:perfcounters/core] perf: Add 'perf sched' tool tip-bot for Ingo Molnar
2009-09-15 9:30 ` [tip:perfcounters/core] perf sched: Import schedbench.c tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Implement the scheduling workload replay engine tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Tighten up the code tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Clean up latency and replay sub-commands tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Display time in milliseconds, reorganize output tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Add runtime stats tip-bot for Ingo Molnar
2009-09-15 9:33 ` [tip:perfcounters/core] perf sched: Output runtime and context switch totals tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Add 'perf sched latency' and 'perf sched replay' tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Finish latency => atom rename and misc cleanups tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Clean up PID sorting logic tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter: Allow mmap if paranoid checks are turned off tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf sched: Add 'perf sched trace', improve documentation tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter, sched: Add sched_stat_runtime tracepoint tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf tools: Implement counter output multiplexing tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Fix 'perf sched latency' output on 32-bit systems tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Print PIDs too tip-bot for mingo
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Add support for sched:sched_stat_runtime events tip-bot for mingo
2009-09-16 10:19 ` [tip:sched/core] sched: Fix double_rq_lock() compile warning tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Split WAKEUP_OVERLAP tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Complete buddy switches tip-bot for Mike Galbraith
2009-09-16 10:19 ` [tip:sched/core] sched: Add come comments to the sched features tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Move code around tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Move sched_balance_self() into sched_fair.c tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Hook sched_balance_self() into sched_class::select_task_rq() tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Add TASK_WAKING tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Merge select_task_rq_fair() and sched_balance_self() tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Weaken SD_POWERSAVINGS_BALANCE tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: for_each_domain() vs RCU tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix task affinity for select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Tweak wake_idx tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix some domain tunings tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Reduce forkexec_idx tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Provide arch_scale_freq_power tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] x86: Move APERF/MPERF into a X86_FEATURE tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: Add generic aperf/mperf code tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: sched: Provide arch implementations using aperf/mperf tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Feature to disable APERF/MPERF cpu_power tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Rename select_task_rq() argument tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Rename sync arguments tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add WF_FORK tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Fix sync wakeups again tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add a few SYNC hint knobs to play with tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add SD_PREFER_LOCAL tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:sched/core] sched: Implement a gentler fair-sleepers feature tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:sched/core] sched: x86: Name old_perf in a unique way tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Account for lost events, increase default buffering tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Sanity check context switch events tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Make idle thread and comm/pid names more consistent tip-bot for Ingo Molnar
2009-09-16 12:36 ` [tip:x86/platform] x86: Move get/set_wallclock to x86_platform_ops tip-bot for Feng Tang
2009-09-16 14:45 ` [tip:perfcounters/core] perf sched: Add 'perf sched map' scheduling event map printout tip-bot for Ingo Molnar
2009-09-16 15:09 ` [tip:sched/core] sched: Optimize cgroup vs wakeup a bit tip-bot for Peter Zijlstra
2009-09-16 15:09 ` [tip:sched/core] sched: Clean up the load_idx selection in select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Rename flags to wake_flags tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Disable wakeup balancing tip-bot for Peter Zijlstra
2009-09-16 18:50 ` Peter Zijlstra
2009-09-16 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-16 19:15 ` tip-bot for Ingo Molnar
2009-09-17 7:48 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 7:49 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-17 7:54 ` tip-bot for Ingo Molnar
2009-09-17 7:54 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING, disable FAIR_SLEEPERS tip-bot for Peter Zijlstra
2009-09-17 8:12 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 8:18 ` tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Stop buddies from hogging the system tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-17 19:34 ` Arjan van de Ven
2009-09-17 19:45 ` Ingo Molnar
2009-09-17 20:09 ` Ingo Molnar
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:12 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-18 19:18 ` [tip:perfcounters/core] perf_counter: Fix up swcounter throttling tip-bot for Peter Zijlstra
2009-09-18 19:19 ` [tip:perfcounters/core] sched_clock: Make it NMI safe tip-bot for Peter Zijlstra
2009-09-19 15:16 ` [tip:sched/urgent] sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair() tip-bot for Mike Galbraith
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename list_entry -> group_entry, counter_list -> group_list tip-bot for Ingo Molnar
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename 'event' to event_id/hw_event tip-bot for Ingo Molnar
2009-09-21 12:53 ` [tip:perfcounters/rename] perf: Tidy up after the big rename tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Use per ratelimit context locking tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Fix/allow use in atomic contexts tip-bot for Ingo Molnar
2009-09-22 14:46 ` Linus Torvalds
2009-09-22 13:34 ` [tip:perf/urgent] perf stat: Fix zero total printouts tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Clean up thermal throttling state tracking code tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Fix thermal throttling message storm tip-bot for Ingo Molnar
2009-09-22 14:26 ` [tip:core/printk] printk: Remove ratelimit.h from kernel.h tip-bot for Ingo Molnar
2009-09-25 8:49 ` [tip:perf/urgent] perf_event: Provide vmalloc() based mmap() backing tip-bot for Peter Zijlstra
2009-10-04 7:54 ` [tip:core/futexes] futex: Fix locking imbalance tip-bot for Thomas Gleixner
2009-10-04 15:48 ` [tip:core/urgent] " tip-bot for Thomas Gleixner
2009-10-05 19:11 ` tip-bot for Thomas Gleixner
2009-10-06 13:18 ` [tip:perf/core] perf tools: Default to 1 KHz auto-sampling freq events tip-bot for Ingo Molnar
2009-10-06 13:42 ` tip-bot for Ingo Molnar
2009-10-06 15:03 ` [tip:core/urgent] futex: Nullify robust lists after cleanup tip-bot for Peter Zijlstra
2009-10-06 15:54 ` Anirban Sinha
2009-10-06 15:03 ` [tip:core/urgent] futex: Move exit_pi_state() call to release_mm() tip-bot for Thomas Gleixner
2009-10-12 7:13 ` [tip:perf/core] perf sched: Add -C option to measure on a specific CPU tip-bot for Mike Galbraith
2009-10-13 19:04 ` [tip:core/urgent] futex: Handle spurious wake up tip-bot for Thomas Gleixner
2009-10-15 10:46 ` [tip:perf/core] events: Harmonize event field names and print output names tip-bot for Ingo Molnar
2009-10-16 8:40 ` [tip:perf/urgent] perf tools: Bump version to 0.0.2 tip-bot for Ingo Molnar
2009-10-24 1:04 ` [tip:branch?] sched: Strengthen buddies and mitigate buddy induced latencies tip-bot for Mike Galbraith
2009-11-02 9:30 ` [tip:x86/urgent] x86: Fix printk message typo in mtrr cleanup code tip-bot for Dave Jones
2009-11-02 19:45 ` [tip:sched/urgent] sched: Disable SD_PREFER_LOCAL at node level tip-bot for Mike Galbraith
2009-11-03 7:03 ` tip-bot for Mike Galbraith
2009-11-04 19:33 ` [tip:sched/core] sched: Rate-limit newidle tip-bot for Mike Galbraith
2009-11-12 11:33 ` [tip:sched/urgent] sched: Fix/add missing update_rq_clock() calls tip-bot for Mike Galbraith
2009-11-13 19:49 ` [tip:timers/core] nohz: Type cast printk argument tip-bot for Thomas Gleixner
2009-11-13 19:50 ` [tip:timers/core] nohz: Track last do_timer() cpu tip-bot for Thomas Gleixner
2009-11-17 17:18 ` [tip:perf/urgent] perf annotate: Allocate history size correctly tip-bot for Nick Piggin
2009-11-23 7:15 ` [tip:tracing/core] ring-buffer benchmark: Run producer/consumer threads at nice +19 tip-bot for Ingo Molnar
2009-11-24 14:16 ` Steven Rostedt
2009-11-24 14:20 ` Steven Rostedt
2009-11-24 14:39 ` Ingo Molnar
2009-11-24 15:01 ` Steven Rostedt
2009-11-24 15:22 ` Ingo Molnar
2009-11-24 15:40 ` Steven Rostedt
2009-11-23 11:52 ` [tip:perf/core] perf events: Do not generate function trace entries in perf code tip-bot for Ingo Molnar
2009-11-23 11:53 ` [tip:tracing/core] tracing, function tracer: Clean up strstrip() usage tip-bot for Ingo Molnar
2009-11-24 14:15 ` Steven Rostedt
2009-11-23 11:53 ` [tip:perf/core] perf_events: Optimize the swcounter hotpath tip-bot for Ingo Molnar
2009-11-26 8:15 ` [tip:x86/debug] x86: dumpstack: Clean up the x86_stack_ids[][] initalization and other details tip-bot for Ingo Molnar
2009-11-30 8:23 ` [tip:perf/scripting] perf scripting: Fix build tip-bot for Ingo Molnar
2009-12-06 20:27 ` [tip:sched/urgent] sched: Fix balance vs hotplug race tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove sysctl.sched_features tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Consolidate select_task_rq() callers tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove rq->clock coupling from set_task_cpu() tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up ttwu() rq locking tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Sanitize fork() handling tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up check_preempt_wakeup() tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Discard some old bits tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Remove unnecessary RCU exclusion tip-bot for Peter Zijlstra
2009-12-10 8:43 ` [tip:sched/urgent] sched: Fix build warning in get_update_sysctl_factor() tip-bot for Mike Galbraith
2009-12-10 19:36 ` [tip:sched/urgent] sched: Remove forced2_migrations stats tip-bot for Ingo Molnar
2009-12-15 9:27 ` [tip:perf/diff] perf diff: Improve the help text tip-bot for Ingo Molnar
2009-12-15 14:30 ` tip-bot for Ingo Molnar
2009-12-28 10:07 ` [tip:perf/core] perf events: Remove arg from perf sched hooks tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Move load balance code into sched_fair.c tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove the sched_class load_balance methods tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator usage from load_balance_fair tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator from move_one_task tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove from fwd decls tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Add a lock break for PREEMPT=y tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Unify load_balance{,_newidle}() tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove load_balance_newidle() tip-bot for Peter Zijlstra
2010-01-21 13:54 ` [tip:sched/core] sched: Assume *balance is valid tip-bot for Peter Zijlstra
2010-01-21 13:55 ` [tip:perf/urgent] perf: Change the is_software_event() definition tip-bot for Peter Zijlstra
2010-01-27 13:16 ` [tip:perf/core] perf: Reimplement frequency driven sampling tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Optimize x86_pmu_disable() tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf, x86: Clean up event constraints code a bit tip-bot for Ingo Molnar
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Deduplicate the disable code tip-bot for Peter Zijlstra
2010-01-31 8:30 ` [tip:perf/core] Revert "perf record: Intercept all events" tip-bot for Hitoshi Mitake
2010-02-04 9:52 ` [tip:x86/debug] x86_64: Print modules like i386 does tip-bot for Alexey Dobriyan
2010-02-04 9:56 ` [tip:perf/core] perf_events: Optimize perf_event_task_tick() tip-bot for Peter Zijlstra
2010-02-04 9:56 ` [tip:perf/core] perf_events, x86: Implement intel core solo/duo support tip-bot for Peter Zijlstra
2010-02-04 9:57 ` [tip:perf/core] bitops: Ensure the compile time HWEIGHT is only used for such tip-bot for Peter Zijlstra
2010-02-04 10:27 ` [PATCH] bitops: Optimize hweight() by making use of compile-time evaluation Peter Zijlstra
2010-02-26 10:24 ` [tip:perf/core] perf_events: Report the MMAP pgoff value in bytes tip-bot for Peter Zijlstra
2010-02-26 10:25 ` [tip:perf/core] perf_events, x86: Remove superflous MSR writes tip-bot for Peter Zijlstra
2010-02-26 14:54 ` [tip:perf/core] perf_events, x86: Split PMU definitions into separate files tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/nmi] nmi_watchdog: Tell the world we're active tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/core] perf, x86: Restrict the ANY flag tip-bot for Peter Zijlstra
2010-03-02 14:31 ` [tip:perf/core] perf_events, x86: Fixup fixed counter constraints tip-bot for Peter Zijlstra
2010-03-02 16:26 ` Stephane Eranian
2010-03-02 17:54 ` Peter Zijlstra
2010-03-03 6:16 ` Stephane Eranian
2010-03-09 8:21 ` [tip:perf/urgent] MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer tip-bot for Ingo Molnar
2010-03-10 13:10 ` [tip:perf/urgent] perf: Optimize perf_disable tip-bot for Peter Zijlstra
2010-03-10 13:10 ` [tip:perf/urgent] perf, x86, Do not user perf_disable from NMI context tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix x86_pmu_start tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Properly account n_added tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix double disable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf, x86: Fix double enable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf: Provide better condition for event rotation tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix pebs drains tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix PEBS enable/disable vs cpuc->enabled tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix LBR " tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Reorder intel_pmu_enable_all() tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Deal with multiple state bits for pebs-fmt1 tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Fix silly bug in intel_pmu_pebs_{enable,disable} tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Don't reset the LBR as frequently tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Remove checking_{wr,rd}msr() usage tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fixup the PEBS handler for Core2 cpus tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fix LBR read-out tip-bot for Peter Zijlstra
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Add INSTRUCTION_DECODER config flag tip-bot for Ingo Molnar
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Fix the !CONFIG_CPU_SUP_INTEL build tip-bot for Ingo Molnar
2010-03-11 14:41 ` [tip:perf/urgent] perf, ppc: Fix compile error due to new cpu notifiers tip-bot for Peter Zijlstra
2010-03-11 14:41 ` [tip:sched/core] sched: Fix pick_next_highest_task_rt() for cgroups tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Fix __initconst vs const tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Add Nehalem programming quirk to Westmere tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING vs fork deadlock tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Optimize task_rq_lock() tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix nr_uninterruptible count tip-bot for Peter Zijlstra
2010-04-02 19:14 ` [tip:sched/core] sched: Add enqueue/dequeue flags tip-bot for Peter Zijlstra
2010-04-23 10:50 ` [tip:sched/core] sched: Pre-compute cpumask_weight(sched_domain_span(sd)) tip-bot for Peter Zijlstra
2010-05-07 18:41 ` [tip:perf/core] perf: Annotate perf_event_read_group() vs perf_event_release_kernel() tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Remove PEBS SAMPLE_RAW support tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Consolidate some code repetition tip-bot for Peter Zijlstra
2010-05-07 18:44 ` [tip:perf/core] perf, x86: Improve the PEBS ABI tip-bot for Peter Zijlstra
2010-05-11 7:24 ` [tip:perf/core] Revert "perf: Fix exit() vs PERF_FORMAT_GROUP" tip-bot for Ingo Molnar
2010-05-17 21:09 ` [tip:perf/core] perf symbols: symbol inconsistency message should be done only at verbose=1 tip-bot for Arnaldo Carvalho de Melo
2010-05-17 22:33 ` [tip:perf/core] perf tools: Add mode to build without newt support tip-bot for Arnaldo Carvalho de Melo
2010-05-18 17:15 ` [tip:perf/core] perf/ftrace: Optimize perf/tracepoint interaction for single events tip-bot for Peter Zijlstra
2010-05-19 7:58 ` Frederic Weisbecker
2010-05-19 8:18 ` Peter Zijlstra
2010-05-19 8:23 ` Frederic Weisbecker
2010-05-19 8:31 ` Peter Zijlstra
2010-05-19 8:58 ` Peter Zijlstra
2010-05-19 9:06 ` Frederic Weisbecker
2010-05-19 9:12 ` Peter Zijlstra
2010-05-19 9:13 ` Frederic Weisbecker
2010-05-21 11:27 ` [tip:perf/core] perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Disallow mmap() on per-task inherited events tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Optimize the perf_output() path by removing IRQ-disables tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize the hotpath by converting the perf output buffer to local_t tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize perf_output_*() by avoiding local_xchg() tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races and clean up perf_event and perf_mmap_data interaction tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races in group composition tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf: Fix signed comparison in perf_adjust_period() tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:sched/core] sched: Fix PROVE_RCU vs cpu_cgroup tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf, x86: Small fix to cpuid10_edx tip-bot for Livio Soares
2010-06-09 10:14 ` [tip:perf/core] perf, trace: Inline perf_swevent_put_recursion_context() tip-bot for Peter Zijlstra
2010-06-09 10:15 ` [tip:perf/core] perf, trace: Remove superfluous rcu_read_lock() tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Rename perf_mmap_data to perf_buffer tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Simplify the ring-buffer logic: make perf_buffer_alloc() do everything needed tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] arch: Implement local64_t tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event_count() tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event::child_count tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Convert perf_event to local_t tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Fix build breakage for architecutes without atomic64_t tip-bot for Peter Zijlstra
2010-07-17 11:12 ` [tip:sched/urgent] sched: Revert nohz_ratelimit() for now tip-bot for Peter Zijlstra
2010-07-18 10:33 ` [tip:perf/core] perf ui: Make END go to the last entry, not the top of the last page tip-bot for Arnaldo Carvalho de Melo
2010-07-18 10:34 ` [tip:perf/core] perf hists: Factor out duplicated code tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf sort: Make column width code per hists instance tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf ui: Restore SPACE as an alias to PGDN in annotate tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf hist: Introduce routine to measure lenght of formatted entry tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Consider the refreshed dimensions in ui_browser__show tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Show the scroll bar over the left window frame tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: New hists tree widget tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:51 ` [tip:perf/core] perf report: Don't abbreviate file paths relative to the cwd tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf tools: Remove unneeded code for tracking the cwd in perf sessions tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf man pages: Fix cut'n'paste error tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf record: Release resources at exit tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf symbols: Precisely specify if dso->{long,short}_name should be freed tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf tools: Factor out buildid reading and make it implicit in dso__load tip-bot for Dave Martin
2010-08-02 7:52 ` [tip:perf/core] perf tools: remove extra build-id check factored into dso__load tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf symbols: Improve debug image search when loading symbols tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf tui: Make CTRL+Z suspend perf tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release thread resources on PERF_RECORD_EXIT tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release session and symbol resources on exit tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Free the ref_reloc_sym memory at the right place tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Invalidate last_match when removing threads from rb_tree tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:55 ` [tip:perf/core] perf tools: Don't keep unreferenced maps when unmaps are detected tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf symbols: Store the symbol binding tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Add a map browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Shorten ui_browser->refresh_entries to refresh tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Handle verbose in hists__sort_list_width tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Fixup addr snprintf width on 32 bit arches tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf ui: Add search by name/addr to the map__browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:06 ` [tip:perf/core] perf report: Speed up exit path tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf tui: Introduce list_head based generic ui_browser refresh routine tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf ui: Start breaking down newt.c into multiple files tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:39 ` [tip:perf/core] perf ui: Shorten ui_browser member names tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_helpline routines to separate file in util/ui/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_progress " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move annotate browser to util/ui/browsers/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move map " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move hists " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Complete the breakdown of util/newt.c tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf annotate: Sort by hottest lines in the TUI tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Make SPACE work as PGDN in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf annotate: Cycle thru sorted lines with samples tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui browser: Add ui_browser__show counterpart: __hide tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui hist browser: Fixup key bindings tip-bot for Arnaldo Carvalho de Melo
2010-08-12 20:03 ` [tip:perf/urgent] perf: Add back list_head data types tip-bot for Ingo Molnar
2010-08-16 17:32 ` [tip:perf/urgent] perf annotate tui: Fix exit and RIGHT keys handling tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:39 ` [tip:perf/core] perf ui browser: Abstract some more slang operations tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Return the exit key in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Add routines to compactly specify exit keys tip-bot for Arnaldo Carvalho de Melo
2010-08-21 20:18 ` [tip:perf/core] perf tools: Add --tui and --stdio to choose the UI tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:33 ` [tip:perf/core] perf hists: Fix hist_entry__init_have_children tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: replace rb_first() != NULL by !RB_EMPTY_ROOT() tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Init the has_children fields just once tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Introduce "expand/collapse all callchains" action tip-bot for Arnaldo Carvalho de Melo
2010-09-09 19:45 ` [tip:perf/core] perf: Fix CPU hotplug tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Deconstify struct pmu tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Register PMU implementations tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Unindent labels tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Reduce perf_disable() usage tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Per PMU disable tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Default PMU ops tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Shrink hw_perf_event tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Rework the PMU methods tip-bot for Peter Zijlstra
2010-09-11 8:16 ` Michael Cree
2010-09-11 8:16 ` Michael Cree
2010-09-11 9:40 ` Peter Zijlstra
2010-09-12 5:33 ` Michael Cree
2010-09-12 5:37 ` [PATCH] alpha: Fix HW performance counters to be stopped properly Michael Cree
2010-09-15 10:02 ` [tip:perf/core] " tip-bot for Michael Cree
2010-09-13 12:15 ` [tip:perf/core] perf: Rework the PMU methods Peter Zijlstra
2010-09-13 13:18 ` Peter Zijlstra
2010-09-14 10:11 ` Michael Cree
2010-09-14 14:07 ` Peter Zijlstra
2010-09-15 20:25 ` Michael Cree
2010-09-09 19:50 ` [tip:perf/core] perf: Remove the sysfs bits tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Separate find_get_context() from event initialization tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Remove the swevent hash-table from the cpu context tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per cpu-context rotation timer tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per-pmu-per-cpu contexts tip-bot for Peter Zijlstra
2010-09-10 14:54 ` Frederic Weisbecker
2010-09-10 15:37 ` Paul E. McKenney
2010-09-10 15:46 ` Peter Zijlstra
2010-09-10 16:05 ` Paul E. McKenney
2010-09-10 15:56 ` Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Move some code around tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Clean up perf_event_context allocation tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Multiple task contexts tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Provide a separate task context for swevents tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Optimize context ops tip-bot for Peter Zijlstra
2010-09-09 19:54 ` [tip:perf/core] perf: Fix up delayed_put_task_struct() tip-bot for Peter Zijlstra
2010-09-10 14:32 ` [tip:perf/core] perf: Ensure we call add_event_to_ctx() with the right locks held tip-bot for Peter Zijlstra
2010-09-10 15:48 ` [tip:perf/core] perf: Fix perf_init_event() tip-bot for Peter Zijlstra
2010-09-13 15:18 ` [tip:perf/core] perf: Sanitize the RCU logic tip-bot for Peter Zijlstra
2010-09-13 15:19 ` [tip:perf/core] perf: Fix free_event() tip-bot for Peter Zijlstra
2010-10-18 19:15 ` [tip:sched/core] sched: Unindent labels tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] perf: Optimize sw events tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] jump_label: Add COND_STMT(), reducer wrappery tip-bot for Peter Zijlstra
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the failed-syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-counts script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: print the syscall name on sctop tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Support fedora 11 (audit 1.7.17) tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf scripting: Shut up 'perf record' final status tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf python scripting: Fixup cut'n'paste error in sctop script tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:02 ` [tip:perf/urgent] perf python scripting: Add futex-contention script tip-bot for Arnaldo Carvalho de Melo
2010-11-21 13:43 ` [tip:perf/core] perf tools: Change my maintainer address tip-bot for Arnaldo Carvalho de Melo
2010-11-23 10:22 ` [tip:sched/core] sched: Fix UP build breakage tip-bot for Peter Zijlstra
2010-11-23 10:22 ` [tip:sched/core] cpu: Remove incorrect BUG_ON tip-bot for Peter Zijlstra
2010-11-23 14:39 ` Oleg Nesterov
2010-11-23 15:05 ` Peter Zijlstra
2010-11-23 15:08 ` Oleg Nesterov
2010-11-23 17:16 ` Peter Zijlstra
2010-11-23 17:31 ` Oleg Nesterov
2010-11-23 10:23 ` [tip:sched/core] sched: Add some clock info to sched_debug tip-bot for Peter Zijlstra
2010-11-23 19:51 ` [tip:perf/urgent] perf record: Handle restrictive permissions in /proc/{kallsyms,modules} tip-bot for Arnaldo Carvalho de Melo
2010-11-26 15:00 ` [tip:perf/core] perf: Fix inherit vs. context rotation bug tip-bot for Thomas Gleixner
2010-11-28 4:36 ` Rakib Mullick
2010-11-26 15:01 ` [tip:perf/core] perf: Fix the software context switch counter tip-bot for Peter Zijlstra
2010-11-26 15:04 ` [tip:perf/core] perf: Ignore non-sampling overflows tip-bot for Peter Zijlstra
2010-11-26 19:20 ` Francis Moreau
2010-11-28 8:33 ` [tip:perf/core] perf record: Add option to disable collecting build-ids tip-bot for Arnaldo Carvalho de Melo
2010-11-29 10:22 ` Stephane Eranian
2010-11-29 15:14 ` Arnaldo Carvalho de Melo
2010-11-28 8:34 ` [tip:perf/core] perf events: Default to using event__process_lost tip-bot for Arnaldo Carvalho de Melo
2010-12-07 7:06 ` [tip:perf/urgent] perf record: Fix eternal wait for stillborn child tip-bot for Arnaldo Carvalho de Melo
2010-12-08 20:39 ` [tip:perf/urgent] perf: Fix duplicate events with multiple-pmu vs software events tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf, amd: Remove the nb lock tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf: Stop all counters on reboot tip-bot for Peter Zijlstra
2010-12-09 23:39 ` [tip:perf/core] perf session: Remove unneeded dump_printf calls tip-bot for Arnaldo Carvalho de Melo
2010-12-16 12:31 ` [tip:perf/core] perf, x86: Detect broken BIOSes that corrupt the PMU tip-bot for Peter Zijlstra
2010-12-16 12:33 ` [tip:perf/core] perf, x86: Provide a PEBS capable cycle event tip-bot for Peter Zijlstra
2010-12-22 11:28 ` [tip:perf/urgent] perf buildid-list: Fix error return for success tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:57 ` [tip:perf/core] perf symbols: Improve kallsyms symbol end addr calculation tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:58 ` [tip:perf/core] perf test: Look forward for symbol aliases tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Finish the rename from trace to script tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf record: Fix use of sample_id_all userspace with !sample_id_all kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Fix event ordering settings to work with older kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf tools: Introduce event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf evsel: Adopt MATCH_EVENT macro from 'stat' tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf util: Move do_read from session to util tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf evsel: Delete the event selectors at exit tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Steal the counter reading routines from stat tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Introduce per cpu and per thread open helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor cpumap to hold nr and the map tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor all_tids " tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Use {cpu,thread}_map to shorten list of parameters tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Auto allocate resources needed for some methods tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:26 ` [tip:perf/core] perf test: Add test for counting open syscalls tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:36 ` [tip:perf/core] perf test: Clarify some error reports in the open syscall test tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf session: Warn about errors when processing pipe events too tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf script: Use the default lost event handler tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:38 ` [tip:perf/core] perf script: Make some lists static tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:09 ` [tip:perf/urgent] perf sched: Fix allocation result check tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:10 ` [tip:perf/urgent] perf tools: Emit clearer message for sys_perf_event_open ENOENT return tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf session: Fix infinite loop in __perf_session__process_events tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:51 ` [tip:perf/urgent] perf evsel: Fix order of event list deletion tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] perf top: Fix annotate segv tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return" tip-bot for Arnaldo Carvalho de Melo
2011-01-18 8:48 ` [tip:perf/urgent] perf tools: Fix handling of wildcards in tracepoint event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-18 19:06 ` [tip:perf/urgent] perf: Fix contexted inheritance tip-bot for Peter Zijlstra
2011-01-21 15:37 ` [tip:perf/urgent] perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat tip-bot for Peter Zijlstra
2011-01-23 18:00 ` [tip:perf/urgent] perf test: Fix build on older glibcs tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:01 ` [tip:perf/urgent] perf tools: Add missing header, fixes build tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build when using gcc 3.4.6 tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build by checking if extra warnings are supported tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Introduce perf_evlist tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evlist: Adopt the pollfd array tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Support event groups tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf evsel: Allow specifying if the inherit bit should be set tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf top: Use perf_evsel__open tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf record: " tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf evsel: Introduce mmap support tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf record: Use struct perf_mmap and helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Move perf_mmap__write_tail to perf.h tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf evlist: Move the mmap array from perf_evsel tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Use perf_evlist__mmap tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf tools: Add missing cpu_map__delete() tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf test: Check counts on all cpus in test__open_syscall_event_on_all_cpus tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf evlist: Steal mmap reading routine from 'perf top' tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf test: Add test for the evlist mmap routines tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:21 ` [tip:perf/core] perf top: Add native_safe_halt to skip symbols tip-bot for Arnaldo Carvalho de Melo
2009-08-04 8:32 ` [patch] perf tools: allow top users to switch between weighted and individual counter display Ingo Molnar
2009-08-04 8:46 ` Mike Galbraith
2009-08-04 8:56 ` Ingo Molnar
2009-08-04 11:36 ` [tip:perfcounters/core] perf top: Improve interactive key handling tip-bot for Mike Galbraith
2009-08-02 13:11 ` [tip:perfcounters/core] perf_counter tools: Allow top users to switch between weighted and individual counter display tip-bot for Mike Galbraith
2009-11-12 10:07 [patch] sched: fix/add missing update_rq_clock() calls Mike Galbraith
2009-11-12 11:01 ` Peter Zijlstra
2009-11-12 11:27 ` Ingo Molnar
2009-11-12 11:29 ` Peter Zijlstra
2009-11-12 11:34 ` Ingo Molnar
2009-11-12 11:36 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090809183010.GF6866@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.