* pm-suspend working, but pm-hibernate fails
@ 2010-02-25 22:27 Ákos Maróy
2010-02-25 22:37 ` Rafael J. Wysocki
0 siblings, 1 reply; 15+ messages in thread
From: Ákos Maróy @ 2010-02-25 22:27 UTC (permalink / raw)
To: linux-pm
Hi,
I wonder how I could debug this issue: I have a system with pm-suspend
working at last (see this thread: http://lkml.org/lkml/2010/2/23/62 for
details), but pm-hibernate does not work. after issuing pm-hibernate, I
see an empty screen with a blinking cursor on the top-left, and then
nothing happens. the machine doesn't power off or anything.
forcing a power cycle leads me to a regular boot.
how could I debug this issue, to find out what fails?
this is on an HP Envy 15 laptop, and Ubunut 9.10, with a 2.6.32.8 kernel.
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:27 pm-suspend working, but pm-hibernate fails Ákos Maróy
@ 2010-02-25 22:37 ` Rafael J. Wysocki
2010-02-25 22:49 ` Ákos Maróy
0 siblings, 1 reply; 15+ messages in thread
From: Rafael J. Wysocki @ 2010-02-25 22:37 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Thursday 25 February 2010, Ákos Maróy wrote:
> Hi,
>
> I wonder how I could debug this issue: I have a system with pm-suspend
> working at last (see this thread: http://lkml.org/lkml/2010/2/23/62 for
> details), but pm-hibernate does not work. after issuing pm-hibernate, I
> see an empty screen with a blinking cursor on the top-left, and then
> nothing happens. the machine doesn't power off or anything.
>
> forcing a power cycle leads me to a regular boot.
>
> how could I debug this issue, to find out what fails?
Please try
# echo core > /sys/power/pm_test
# echo disk > /sys/power/state
That should return to the command prompt after ~5 sec.
Rafael
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:37 ` Rafael J. Wysocki
@ 2010-02-25 22:49 ` Ákos Maróy
2010-02-25 22:57 ` Rafael J. Wysocki
2010-02-25 23:32 ` Alan Stern
0 siblings, 2 replies; 15+ messages in thread
From: Ákos Maróy @ 2010-02-25 22:49 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm
[-- Attachment #1: Type: text/plain, Size: 1398 bytes --]
Rafael,
> Please try
>
> # echo core > /sys/power/pm_test
> # echo disk > /sys/power/state
>
> That should return to the command prompt after ~5 sec.
thanks. indeed, it does return, this is what I get in /var/log/messages:
Feb 25 23:46:24 tonkachi kernel: [ 77.846865] PM: Syncing filesystems
... done.
Feb 25 23:46:24 tonkachi kernel: [ 77.997120] Freezing user space
processes ... (elapsed 0.00 seconds) done.
Feb 25 23:46:24 tonkachi kernel: [ 77.998042] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
Feb 25 23:46:24 tonkachi kernel: [ 77.998269] PM: Preallocating image
memory... done (allocated 1936029 pages)
Feb 25 23:46:24 tonkachi kernel: [ 80.480913] PM: Allocated 7744116
kbytes in 2.48 seconds (3122.62 MB/s)
Feb 25 23:46:24 tonkachi kernel: [ 80.480918] Suspending console(s)
(use no_console_suspend to debug)
Feb 25 23:46:24 tonkachi kernel: [ 81.030959] Registered led device:
iwl-phy0::radio
Feb 25 23:46:24 tonkachi kernel: [ 81.030989] Registered led device:
iwl-phy0::assoc
Feb 25 23:46:24 tonkachi kernel: [ 81.031016] Registered led device:
iwl-phy0::RX
Feb 25 23:46:24 tonkachi kernel: [ 81.031041] Registered led device:
iwl-phy0::TX
Feb 25 23:46:24 tonkachi kernel: [ 81.166877] Restarting tasks ...
Feb 25 23:46:24 tonkachi kernel: [ 81.169743] done.
my dmesg is much more talkative - please find it attached.
Akos
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 145513 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.8-usb-debug (root@tonkachi) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #1 SMP Thu Feb 25 22:03:46 CET 2010
[ 0.000000] Command line: root=/dev/mapper/isw_cdfcbdcfed_RAID-02 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf682000 (usable)
[ 0.000000] BIOS-e820: 00000000bf682000 - 00000000bf6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6bf000 - 00000000bf75c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf75c000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7bf000 - 00000000bf7e4000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-combining
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009bc00 (usable)
[ 0.000000] modified: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf682000 (usable)
[ 0.000000] modified: 00000000bf682000 - 00000000bf6bf000 (reserved)
[ 0.000000] modified: 00000000bf6bf000 - 00000000bf75c000 (usable)
[ 0.000000] modified: 00000000bf75c000 - 00000000bf7bf000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7bf000 - 00000000bf7e4000 (usable)
[ 0.000000] modified: 00000000bf7e4000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] modified: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] modified: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ a000-14000
[ 0.000000] RAMDISK: 33d19000 - 37fef0a6
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bf7fe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bf7ee000 0ABEA (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bf76e000 00040
[ 0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bf7ed000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7ec000 0073D (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7eb000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 00000000bf7ea000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e9000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7e8000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: SPCR 00000000bf7e7000 00050 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bf7e6000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 00000000bf7e5000 00224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e4000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000000000f000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000005bfff] pages 48
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a157c4] TEXT DATA BSS ==> [0001000000 - 0001a157c4]
[ 0.000000] #3 [0033d19000 - 0037fef0a6] RAMDISK ==> [0033d19000 - 0037fef0a6]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [0001a16000 - 0001a16230] BRK ==> [0001a16000 - 0001a16230]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bf682
[ 0.000000] 0: 0x000bf6bf -> 0x000bf75c
[ 0.000000] 0: 0x000bf7bf -> 0x000bf7e4
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094811
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765821 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf682000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf75c000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e4000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[ 0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91224 r8192 d23464 u262144
[ 0.000000] pcpu-alloc: s91224 r8192 d23464 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062445
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/isw_cdfcbdcfed_RAID-02 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8118524k/9437184k available (5407k kernel code, 1057940k absent, 260720k reserved, 3084k data, 692k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 25 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 26 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 27 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 28 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 1595.779 MHz processor.
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.55 BogoMIPS (lpj=15957790)
[ 0.000026] Security Framework initialized
[ 0.000031] SELinux: Disabled at boot.
[ 0.000731] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002931] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003852] Mount-cache hash table entries: 256
[ 0.003959] Initializing cgroup subsys ns
[ 0.003962] Initializing cgroup subsys cpuacct
[ 0.003967] Initializing cgroup subsys memory
[ 0.003972] Initializing cgroup subsys freezer
[ 0.003974] Initializing cgroup subsys net_cls
[ 0.003990] CPU: Physical Processor ID: 0
[ 0.003992] CPU: Processor Core ID: 0
[ 0.003995] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003998] CPU: L2 cache: 256K
[ 0.003999] CPU: L3 cache: 6144K
[ 0.004002] CPU 0/0x0 -> Node 0
[ 0.004005] mce: CPU supports 9 MCE banks
[ 0.004016] CPU0: Thermal monitoring enabled (TM1)
[ 0.004020] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004029] using mwait in idle threads.
[ 0.004031] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.004036] ... version: 3
[ 0.004038] ... bit width: 48
[ 0.004039] ... generic registers: 4
[ 0.004041] ... value mask: 0000ffffffffffff
[ 0.004042] ... max period: 000000007fffffff
[ 0.004044] ... fixed-purpose events: 3
[ 0.004045] ... event mask: 000000070000000f
[ 0.006508] ACPI: Core revision 20090903
[ 0.039575] Setting APIC routing to flat
[ 0.039953] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139855] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.257764] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.268340] Initializing CPU#1
[ 0.417495] CPU: Physical Processor ID: 0
[ 0.417496] CPU: Processor Core ID: 1
[ 0.417499] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.417501] CPU: L2 cache: 256K
[ 0.417502] CPU: L3 cache: 6144K
[ 0.417505] CPU 1/0x2 -> Node 0
[ 0.417517] CPU1: Thermal monitoring enabled (TM1)
[ 0.417521] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.417617] CPU1: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.417629] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.437694] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.448031] Initializing CPU#2
[ 0.597321] CPU: Physical Processor ID: 0
[ 0.597323] CPU: Processor Core ID: 2
[ 0.597325] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.597327] CPU: L2 cache: 256K
[ 0.597329] CPU: L3 cache: 6144K
[ 0.597331] CPU 2/0x4 -> Node 0
[ 0.597343] CPU2: Thermal monitoring enabled (TM1)
[ 0.597347] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.597447] CPU2: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.597458] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.617525] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.627862] Initializing CPU#3
[ 0.777147] CPU: Physical Processor ID: 0
[ 0.777149] CPU: Processor Core ID: 3
[ 0.777152] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.777154] CPU: L2 cache: 256K
[ 0.777155] CPU: L3 cache: 6144K
[ 0.777157] CPU 3/0x6 -> Node 0
[ 0.777170] CPU3: Thermal monitoring enabled (TM1)
[ 0.777173] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.777277] CPU3: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.777288] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.797357] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.807699] Initializing CPU#4
[ 0.956975] CPU: Physical Processor ID: 0
[ 0.956976] CPU: Processor Core ID: 0
[ 0.956980] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.956982] CPU: L2 cache: 256K
[ 0.956984] CPU: L3 cache: 6144K
[ 0.956987] CPU 4/0x1 -> Node 0
[ 0.957000] CPU4: Thermal monitoring enabled (TM1)
[ 0.957004] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.957029] CPU4: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 0.957042] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.977111] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.987447] Initializing CPU#5
[ 1.136800] CPU: Physical Processor ID: 0
[ 1.136801] CPU: Processor Core ID: 1
[ 1.136804] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.136806] CPU: L2 cache: 256K
[ 1.136807] CPU: L3 cache: 6144K
[ 1.136810] CPU 5/0x3 -> Node 0
[ 1.136822] CPU5: Thermal monitoring enabled (TM1)
[ 1.136825] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.136864] CPU5: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.136876] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 1.156942] Booting processor 6 APIC 0x5 ip 0x6000
[ 1.167279] Initializing CPU#6
[ 1.316626] CPU: Physical Processor ID: 0
[ 1.316628] CPU: Processor Core ID: 2
[ 1.316630] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.316632] CPU: L2 cache: 256K
[ 1.316633] CPU: L3 cache: 6144K
[ 1.316636] CPU 6/0x5 -> Node 0
[ 1.316648] CPU6: Thermal monitoring enabled (TM1)
[ 1.316651] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.316695] CPU6: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.316707] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 1.336775] Booting processor 7 APIC 0x7 ip 0x6000
[ 1.347111] Initializing CPU#7
[ 1.496452] CPU: Physical Processor ID: 0
[ 1.496454] CPU: Processor Core ID: 3
[ 1.496457] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.496458] CPU: L2 cache: 256K
[ 1.496460] CPU: L3 cache: 6144K
[ 1.496462] CPU 7/0x7 -> Node 0
[ 1.496474] CPU7: Thermal monitoring enabled (TM1)
[ 1.496477] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.496527] CPU7: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
[ 1.496539] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 1.516540] Brought up 8 CPUs
[ 1.516543] Total of 8 processors activated (25535.22 BogoMIPS).
[ 1.520265] CPU0 attaching sched-domain:
[ 1.520269] domain 0: span 0,4 level SIBLING
[ 1.520272] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.520277] domain 1: span 0-7 level MC
[ 1.520280] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.520290] CPU1 attaching sched-domain:
[ 1.520292] domain 0: span 1,5 level SIBLING
[ 1.520295] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.520299] domain 1: span 0-7 level MC
[ 1.520302] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.520311] CPU2 attaching sched-domain:
[ 1.520312] domain 0: span 2,6 level SIBLING
[ 1.520315] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.520320] domain 1: span 0-7 level MC
[ 1.520322] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.520330] CPU3 attaching sched-domain:
[ 1.520332] domain 0: span 3,7 level SIBLING
[ 1.520335] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.520339] domain 1: span 0-7 level MC
[ 1.520342] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.520350] CPU4 attaching sched-domain:
[ 1.520352] domain 0: span 0,4 level SIBLING
[ 1.520354] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.520359] domain 1: span 0-7 level MC
[ 1.520361] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 1.520370] CPU5 attaching sched-domain:
[ 1.520372] domain 0: span 1,5 level SIBLING
[ 1.520374] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.520379] domain 1: span 0-7 level MC
[ 1.520381] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 1.520390] CPU6 attaching sched-domain:
[ 1.520392] domain 0: span 2,6 level SIBLING
[ 1.520394] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.520399] domain 1: span 0-7 level MC
[ 1.520401] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 1.520410] CPU7 attaching sched-domain:
[ 1.520412] domain 0: span 3,7 level SIBLING
[ 1.520414] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.520419] domain 1: span 0-7 level MC
[ 1.520421] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 1.521089] regulator: core version 0.5
[ 1.521120] Time: 22:45:04 Date: 02/25/10
[ 1.521163] NET: Registered protocol family 16
[ 1.521269] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.521272] ACPI: bus type pci registered
[ 1.521357] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.521360] PCI: MCFG area at e0000000 reserved in E820
[ 1.530448] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.530450] PCI: Using configuration type 1 for base access
[ 1.531317] bio: create slab <bio-0> at 0
[ 1.532877] ACPI: EC: Look up EC in DSDT
[ 1.534640] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.539336] ACPI: BIOS _OSI(Linux) query ignored
[ 1.551624] ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
[ 1.551635] ACPI Error (psparse-0537): Method parse/execution failed [\CPUT] (Node ffff8802370570a0), AE_NOT_FOUND
[ 1.551684] ACPI Error (psparse-0537): Method parse/execution failed [\PSSC] (Node ffff8802370570c0), AE_NOT_FOUND
[ 1.551732] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88023703fa60), AE_NOT_FOUND
[ 1.551799] Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[ 1.551896] ACPI: Interpreter enabled
[ 1.551900] ACPI: (supports S0 S3 S4 S5)
[ 1.551948] ACPI: Using IOAPIC for interrupt routing
[ 1.564465] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 1.565393] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.566441] _OSC invalid UUID
[ 1.566444] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.566590] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.566594] pci 0000:00:03.0: PME# disabled
[ 1.566660] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.566663] pci 0000:00:05.0: PME# disabled
[ 1.566996] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd4200000-0xd4203fff]
[ 1.567048] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.567057] pci 0000:00:1b.0: PME# disabled
[ 1.567140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.567148] pci 0000:00:1c.0: PME# disabled
[ 1.567227] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.567235] pci 0000:00:1c.1: PME# disabled
[ 1.567307] pci 0000:00:1d.0: reg 10 32bit mmio: [0xd4205800-0xd4205bff]
[ 1.567373] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.567382] pci 0000:00:1d.0: PME# disabled
[ 1.567617] pci 0000:00:1f.2: reg 10 io port: [0x5048-0x504f]
[ 1.567628] pci 0000:00:1f.2: reg 14 io port: [0x5054-0x5057]
[ 1.567639] pci 0000:00:1f.2: reg 18 io port: [0x5040-0x5047]
[ 1.567650] pci 0000:00:1f.2: reg 1c io port: [0x5050-0x5053]
[ 1.567660] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 1.567671] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4205000-0xd42057ff]
[ 1.567713] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.567722] pci 0000:00:1f.2: PME# disabled
[ 1.567769] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd4205c00-0xd4205cff]
[ 1.567787] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 1.567860] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.567870] pci 0000:01:00.0: reg 18 64bit mmio: [0xd4100000-0xd411ffff]
[ 1.567876] pci 0000:01:00.0: reg 20 io port: [0x4000-0x40ff]
[ 1.567886] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 1.567906] pci 0000:01:00.0: supports D1 D2
[ 1.567941] pci 0000:01:00.1: reg 10 64bit mmio: [0xd4120000-0xd4123fff]
[ 1.567979] pci 0000:01:00.1: supports D1 D2
[ 1.568017] pci 0000:00:03.0: bridge io port: [0x4000-0x4fff]
[ 1.568020] pci 0000:00:03.0: bridge 32bit mmio: [0xd4100000-0xd41fffff]
[ 1.568026] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 1.568075] pci 0000:02:00.0: reg 10 64bit mmio: [0xd4000000-0xd4001fff]
[ 1.568129] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.568135] pci 0000:02:00.0: PME# disabled
[ 1.568176] pci 0000:00:05.0: bridge 32bit mmio: [0xd4000000-0xd40fffff]
[ 1.568765] pci 0000:03:00.0: reg 10 64bit mmio: [0xd3000000-0xd3001fff]
[ 1.569539] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.569579] pci 0000:03:00.0: PME# disabled
[ 1.569838] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 1.569847] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3000000-0xd3ffffff]
[ 1.569858] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff]
[ 1.569931] pci 0000:04:00.0: reg 10 64bit mmio: [0xd2000000-0xd203ffff]
[ 1.569945] pci 0000:04:00.0: reg 18 io port: [0x2000-0x207f]
[ 1.570017] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.570026] pci 0000:04:00.0: PME# disabled
[ 1.570086] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 1.570095] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2000000-0xd2ffffff]
[ 1.570106] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1000000-0xd1ffffff]
[ 1.570165] pci 0000:00:1e.0: transparent bridge
[ 1.570217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.570508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.570731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.570869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.571048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 1.571185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG5._PRT]
[ 1.571430] _OSC invalid UUID
[ 1.584153] ACPI: PCI Root Bridge [CPBG] (0000:ff)
[ 1.585205] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.585390] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.585569] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.585749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.585931] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.586109] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.586288] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.586474] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.586620] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.586631] vgaarb: loaded
[ 1.586727] SCSI subsystem initialized
[ 1.586859] libata version 3.00 loaded.
[ 1.586934] usbcore: registered new interface driver usbfs
[ 1.586948] usbcore: registered new interface driver hub
[ 1.586975] usbcore: registered new device driver usb
[ 1.587130] ACPI: WMI: Mapper loaded
[ 1.587132] PCI: Using ACPI for IRQ routing
[ 1.587437] Bluetooth: Core ver 2.15
[ 1.587468] NET: Registered protocol family 31
[ 1.587470] Bluetooth: HCI device and connection manager initialized
[ 1.587472] Bluetooth: HCI socket layer initialized
[ 1.587474] NetLabel: Initializing
[ 1.587476] NetLabel: domain hash size = 128
[ 1.587477] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.587490] NetLabel: unlabeled traffic allowed by default
[ 1.587531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 1.587538] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.596433] hpet: hpet2 irq 24 for MSI
[ 1.596592] hpet: hpet3 irq 25 for MSI
[ 1.606593] hpet: hpet4 irq 26 for MSI
[ 1.616586] hpet: hpet5 irq 27 for MSI
[ 1.626489] hpet: hpet6 irq 28 for MSI
[ 1.656471] Switching to clocksource tsc
[ 1.658121] pnp: PnP ACPI init
[ 1.658130] ACPI: bus type pnp registered
[ 1.661142] alloc irq_desc for 23 on node 0
[ 1.661144] alloc kstat_irqs on node 0
[ 1.663442] pnp: PnP ACPI: found 12 devices
[ 1.663444] ACPI: ACPI bus type pnp unregistered
[ 1.663455] system 00:05: ioport range 0x680-0x69f has been reserved
[ 1.663458] system 00:05: ioport range 0x800-0x80f has been reserved
[ 1.663461] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 1.663464] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 1.663467] system 00:05: ioport range 0x400-0x47f has been reserved
[ 1.663469] system 00:05: ioport range 0x500-0x57f has been reserved
[ 1.663472] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 1.663475] system 00:05: ioport range 0x380-0x38e has been reserved
[ 1.663482] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.663486] system 00:0a: iomem range 0xfed1b000-0xfed1bfff has been reserved
[ 1.663489] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.663491] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.663495] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.663498] system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
[ 1.663501] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.663504] system 00:0a: iomem range 0x0-0xfff could not be reserved
[ 1.668184] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 1.668341] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 1.668345] pci 0000:00:03.0: IO window: 0x4000-0x4fff
[ 1.668349] pci 0000:00:03.0: MEM window: 0xd4100000-0xd41fffff
[ 1.668353] pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.668359] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.668361] pci 0000:00:05.0: IO window: disabled
[ 1.668365] pci 0000:00:05.0: MEM window: 0xd4000000-0xd40fffff
[ 1.668368] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.668373] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.668381] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 1.668391] pci 0000:00:1c.0: MEM window: 0xd3000000-0xd3ffffff
[ 1.668400] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff
[ 1.668411] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 1.668419] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 1.668428] pci 0000:00:1c.1: MEM window: 0xd2000000-0xd2ffffff
[ 1.668437] pci 0000:00:1c.1: PREFETCH window: 0x000000d1000000-0x000000d1ffffff
[ 1.668448] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 1.668450] pci 0000:00:1e.0: IO window: disabled
[ 1.668459] pci 0000:00:1e.0: MEM window: disabled
[ 1.668467] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.668484] alloc irq_desc for 16 on node -1
[ 1.668486] alloc kstat_irqs on node -1
[ 1.668491] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.668495] pci 0000:00:03.0: setting latency timer to 64
[ 1.668502] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.668506] pci 0000:00:05.0: setting latency timer to 64
[ 1.668518] alloc irq_desc for 17 on node -1
[ 1.668519] alloc kstat_irqs on node -1
[ 1.668523] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.668528] pci 0000:00:1c.0: setting latency timer to 64
[ 1.668545] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.668554] pci 0000:00:1c.1: setting latency timer to 64
[ 1.668569] pci 0000:00:1e.0: setting latency timer to 64
[ 1.668577] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.668580] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.668583] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff]
[ 1.668585] pci_bus 0000:01: resource 1 mem: [0xd4100000-0xd41fffff]
[ 1.668588] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 1.668591] pci_bus 0000:02: resource 1 mem: [0xd4000000-0xd40fffff]
[ 1.668593] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 1.668596] pci_bus 0000:03: resource 1 mem: [0xd3000000-0xd3ffffff]
[ 1.668598] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd0ffffff]
[ 1.668601] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 1.668604] pci_bus 0000:04: resource 1 mem: [0xd2000000-0xd2ffffff]
[ 1.668606] pci_bus 0000:04: resource 2 pref mem [0xd1000000-0xd1ffffff]
[ 1.668609] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 1.668611] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.668614] pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
[ 1.668616] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.668651] NET: Registered protocol family 2
[ 1.668902] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.670064] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.673592] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.674020] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.674023] TCP reno registered
[ 1.674115] NET: Registered protocol family 1
[ 1.674168] pci 0000:00:1d.0: EHCI: BIOS handoff
[ 1.689158] pci 0000:01:00.0: Boot video device
[ 1.691244] pci 0000:02:00.0: xHCI HW did not halt within 2000 usec status = 0x0
[ 1.691311] Trying to unpack rootfs image as initramfs...
[ 3.455397] Freeing initrd memory: 68440k freed
[ 3.466688] Simple Boot Flag at 0x44 set to 0x1
[ 3.467248] Scanning for low memory corruption every 60 seconds
[ 3.467374] audit: initializing netlink socket (disabled)
[ 3.467386] type=2000 audit(1267137905.280:1): initialized
[ 3.479762] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.481276] VFS: Disk quotas dquot_6.5.2
[ 3.481333] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.481968] fuse init (API version 7.13)
[ 3.482052] msgmni has been set to 15990
[ 3.482337] alg: No test for stdrng (krng)
[ 3.482348] io scheduler noop registered
[ 3.482351] io scheduler anticipatory registered
[ 3.482353] io scheduler deadline registered
[ 3.482400] io scheduler cfq registered (default)
[ 3.482535] alloc irq_desc for 29 on node -1
[ 3.482538] alloc kstat_irqs on node -1
[ 3.482546] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[ 3.482553] pcieport 0000:00:03.0: setting latency timer to 64
[ 3.482655] alloc irq_desc for 30 on node -1
[ 3.482657] alloc kstat_irqs on node -1
[ 3.482663] pcieport 0000:00:05.0: irq 30 for MSI/MSI-X
[ 3.482669] pcieport 0000:00:05.0: setting latency timer to 64
[ 3.482774] alloc irq_desc for 31 on node -1
[ 3.482776] alloc kstat_irqs on node -1
[ 3.482788] pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
[ 3.482800] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.482919] alloc irq_desc for 32 on node -1
[ 3.482921] alloc kstat_irqs on node -1
[ 3.482932] pcieport 0000:00:1c.1: irq 32 for MSI/MSI-X
[ 3.482945] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.483180] _OSC invalid UUID
[ 3.483183] aer 0000:00:03.0:pcie02: AER service couldn't init device: _OSC failed
[ 3.483305] _OSC invalid UUID
[ 3.483307] aer 0000:00:05.0:pcie02: AER service couldn't init device: _OSC failed
[ 3.483318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.483450] _OSC invalid UUID
[ 3.483611] _OSC invalid UUID
[ 3.483785] _OSC invalid UUID
[ 3.483944] _OSC invalid UUID
[ 3.483987] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.484498] ACPI: AC Adapter [ACAD] (on-line)
[ 3.484580] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.484583] ACPI: Power Button [PWRB]
[ 3.484623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.484990] ACPI: Lid Switch [LID0]
[ 3.485053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.485056] ACPI: Power Button [PWRF]
[ 3.486609] ACPI: SSDT 00000000bf691a98 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 3.487331] ACPI: SSDT 00000000bf690618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 3.488062] Monitor-Mwait will be used to enter C-1 state
[ 3.488084] Monitor-Mwait will be used to enter C-2 state
[ 3.488121] processor LNXCPU:00: registered as cooling_device0
[ 3.488774] ACPI: SSDT 00000000bf691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 3.489461] ACPI: SSDT 00000000bf68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 3.490364] processor LNXCPU:01: registered as cooling_device1
[ 3.491457] processor LNXCPU:02: registered as cooling_device2
[ 3.492542] processor LNXCPU:03: registered as cooling_device3
[ 3.493606] processor LNXCPU:04: registered as cooling_device4
[ 3.494711] processor LNXCPU:05: registered as cooling_device5
[ 3.495798] processor LNXCPU:06: registered as cooling_device6
[ 3.496897] processor LNXCPU:07: registered as cooling_device7
[ 3.505333] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.505341] ACPI: Thermal Zone [TZ01] (61 C)
[ 3.506909] Linux agpgart interface v0.103
[ 3.506913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.508392] brd: module loaded
[ 3.508989] loop: module loaded
[ 3.509055] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.509178] ahci 0000:00:1f.2: version 3.0
[ 3.509196] alloc irq_desc for 19 on node -1
[ 3.509198] alloc kstat_irqs on node -1
[ 3.509237] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.509274] alloc irq_desc for 33 on node -1
[ 3.509276] alloc kstat_irqs on node -1
[ 3.509288] ahci 0000:00:1f.2: irq 33 for MSI/MSI-X
[ 3.509355] ahci: SSS flag set, parallel bus scan disabled
[ 3.509393] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl RAID mode
[ 3.509397] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 3.509406] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.512416] ACPI: Battery Slot [BAT0] (battery present)
[ 3.512789] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.546576] scsi0 : ahci
[ 3.546650] scsi1 : ahci
[ 3.546701] scsi2 : ahci
[ 3.546747] scsi3 : ahci
[ 3.546791] scsi4 : ahci
[ 3.546837] scsi5 : ahci
[ 3.547076] ata1: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205100 irq 33
[ 3.547084] ata2: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205180 irq 33
[ 3.547087] ata3: DUMMY
[ 3.547088] ata4: DUMMY
[ 3.547089] ata5: DUMMY
[ 3.547095] ata6: SATA max UDMA/133 abar m2048@0xd4205000 port 0xd4205380 irq 33
[ 3.547914] Fixed MDIO Bus: probed
[ 3.547950] PPP generic driver version 2.4.2
[ 3.548023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.548026] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 3.548051] alloc irq_desc for 20 on node -1
[ 3.548053] alloc kstat_irqs on node -1
[ 3.548058] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.548074] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.548082] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.548096] drivers/usb/core/inode.c: creating file 'devices'
[ 3.548104] drivers/usb/core/inode.c: creating file '001'
[ 3.548127] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.548140] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 3.548148] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 3.548182] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.548192] ehci_hcd 0000:00:1d.0: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 3.552088] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 3.552090] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 3.552106] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4205800
[ 3.552115] ehci_hcd 0000:00:1d.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.556003] ehci_hcd 0000:00:1d.0: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.576461] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.576505] usb usb1: default language 0x0409
[ 3.576517] usb usb1: udev 1, busnum 1, minor = 0
[ 3.576521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.576526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.576532] usb usb1: Product: EHCI Host Controller
[ 3.576534] usb usb1: Manufacturer: Linux 2.6.32.8-usb-debug ehci_hcd
[ 3.576536] usb usb1: SerialNumber: 0000:00:1d.0
[ 3.576573] usb usb1: uevent
[ 3.576584] usb usb1: usb_probe_device
[ 3.576586] usb usb1: configuration #1 chosen from 1 choice
[ 3.576593] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.576606] usb 1-0:1.0: uevent
[ 3.576616] hub 1-0:1.0: usb_probe_interface
[ 3.576618] hub 1-0:1.0: usb_probe_interface - got id
[ 3.576620] hub 1-0:1.0: USB hub found
[ 3.576626] hub 1-0:1.0: 2 ports detected
[ 3.576628] hub 1-0:1.0: standalone hub
[ 3.576630] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.576632] hub 1-0:1.0: individual port over-current protection
[ 3.576634] hub 1-0:1.0: power on to power good time: 20ms
[ 3.576638] hub 1-0:1.0: local power source is good
[ 3.576640] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.576668] drivers/usb/core/inode.c: creating file '001'
[ 3.576700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.576703] ohci_hcd: block sizes: ed 80 td 96
[ 3.576719] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.576810] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.590044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.590050] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.590105] mice: PS/2 mouse device common for all mice
[ 3.590193] rtc_cmos 00:06: RTC can wake from S4
[ 3.590222] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.590261] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.590386] device-mapper: uevent: version 1.0.3
[ 3.591411] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.591533] device-mapper: multipath: version 1.1.0 loaded
[ 3.591536] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.592029] cpuidle: using governor ladder
[ 3.592304] cpuidle: using governor menu
[ 3.592703] TCP cubic registered
[ 3.592833] NET: Registered protocol family 10
[ 3.593314] lo: Disabled Privacy Extensions
[ 3.593622] NET: Registered protocol family 17
[ 3.593637] Bluetooth: L2CAP ver 2.14
[ 3.593639] Bluetooth: L2CAP socket layer initialized
[ 3.593642] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.593643] Bluetooth: SCO socket layer initialized
[ 3.593663] Bluetooth: RFCOMM TTY layer initialized
[ 3.593665] Bluetooth: RFCOMM socket layer initialized
[ 3.593667] Bluetooth: RFCOMM ver 1.11
[ 3.593697] ------------[ cut here ]------------
[ 3.593703] WARNING: at arch/x86/kernel/hpet.c:392 hpet_next_event+0x75/0x90()
[ 3.593705] Hardware name: HP ENVY 15 Notebook PC
[ 3.593707] Modules linked in:
[ 3.593710] Pid: 0, comm: swapper Not tainted 2.6.32.8-usb-debug #1
[ 3.593712] Call Trace:
[ 3.593717] [<ffffffff810601c8>] warn_slowpath_common+0x78/0xb0
[ 3.593721] [<ffffffff8106020f>] warn_slowpath_null+0xf/0x20
[ 3.593724] [<ffffffff810344a5>] hpet_next_event+0x75/0x90
[ 3.593727] [<ffffffff810344eb>] hpet_legacy_next_event+0xb/0x10
[ 3.593732] [<ffffffff8108a9cf>] clockevents_program_event+0x4f/0x90
[ 3.593736] [<ffffffff8108bdf0>] tick_dev_program_event+0x40/0xd0
[ 3.593739] [<ffffffff8108b796>] tick_broadcast_oneshot_control+0x116/0x120
[ 3.593743] [<ffffffff8108b015>] tick_notify+0x335/0x410
[ 3.593747] [<ffffffff81036449>] ? default_spin_lock_flags+0x9/0x10
[ 3.593807] [<ffffffff81543bb7>] notifier_call_chain+0x47/0x90
[ 3.593812] [<ffffffff810824f1>] raw_notifier_call_chain+0x11/0x20
[ 3.593815] [<ffffffff8108a802>] clockevents_notify+0x32/0x150
[ 3.593820] [<ffffffff812e93a9>] lapic_timer_state_broadcast+0x41/0x43
[ 3.593824] [<ffffffff812e9abe>] acpi_idle_enter_simple+0x91/0x13b
[ 3.593828] [<ffffffff8141dad5>] ? menu_select+0x105/0x2b0
[ 3.593833] [<ffffffff8141cabf>] cpuidle_idle_call+0x9f/0x130
[ 3.593837] [<ffffffff81010e4b>] cpu_idle+0xab/0x100
[ 3.593841] [<ffffffff8153a7e3>] start_secondary+0x18d/0x192
[ 3.593847] ---[ end trace 27507780c8f5b248 ]---
[ 3.597137] PM: Resume from disk failed.
[ 3.597143] registered taskstats version 1
[ 3.597645] Magic number: 14:424:806
[ 3.597788] rtc_cmos 00:06: setting system clock to 2010-02-25 22:45:06 UTC (1267137906)
[ 3.597795] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.597797] EDD information not available.
[ 3.611872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.676451] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 3.676461] hub 1-0:1.0: port 1: status 0501 change 0001
[ 3.774531] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 3.774548] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.834774] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 3.834777] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 3.894382] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.894395] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.894743] ata1.00: ATA-7: INTEL SSDSA1M160G2HP, 2CV102HA, max UDMA/100
[ 3.894746] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.895431] ata1.00: configured for UDMA/100
[ 3.914471] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5
[ 3.914560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.914706] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.914741] sd 0:0:0:0: [sda] Write Protect is off
[ 3.914742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.914755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.914823] sda: sda1 sda2 sda3 sda4
[ 3.915572] sda: p2 size 408211650 exceeds device capacity, limited to end of disk
[ 3.915614] sda: p3 ignored, start 453065130 is behind the end of the disk
[ 3.915616] sda: p4 ignored, start 441803565 is behind the end of the disk
[ 3.915785] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.954533] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 3.954536] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 4.046391] usb 1-1: udev 2, busnum 1, minor = 1
[ 4.046396] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.046401] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.046471] usb 1-1: uevent
[ 4.046491] usb 1-1: usb_probe_device
[ 4.046496] usb 1-1: configuration #1 chosen from 1 choice
[ 4.046621] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4.046650] usb 1-1:1.0: uevent
[ 4.046671] hub 1-1:1.0: usb_probe_interface
[ 4.046675] hub 1-1:1.0: usb_probe_interface - got id
[ 4.046679] hub 1-1:1.0: USB hub found
[ 4.046882] hub 1-1:1.0: 8 ports detected
[ 4.046886] hub 1-1:1.0: standalone hub
[ 4.046889] hub 1-1:1.0: individual port power switching
[ 4.046892] hub 1-1:1.0: individual port over-current protection
[ 4.046896] hub 1-1:1.0: Single TT
[ 4.046900] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.046903] hub 1-1:1.0: Port indicators are supported
[ 4.046907] hub 1-1:1.0: power on to power good time: 100ms
[ 4.047255] hub 1-1:1.0: local power source is good
[ 4.047261] hub 1-1:1.0: enabling power on all ports
[ 4.048283] drivers/usb/core/inode.c: creating file '002'
[ 4.144787] hub 1-1:1.0: port 5: status 0101 change 0001
[ 4.145044] hub 1-1:1.0: port 6: status 0101 change 0001
[ 4.243973] usb 1-1: link qh256-0001/ffff880227ceee80 start 1 [1/0 us]
[ 4.243993] hub 1-1:1.0: state 7 ports 8 chg 0060 evt 0000
[ 4.244248] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[ 4.324182] usb 1-1.5: new high speed USB device using ehci_hcd and address 3
[ 4.438448] usb 1-1.5: skipped 1 descriptor after configuration
[ 4.438454] usb 1-1.5: skipped 5 descriptors after interface
[ 4.438460] usb 1-1.5: skipped 1 descriptor after endpoint
[ 4.438465] usb 1-1.5: skipped 8 descriptors after interface
[ 4.438693] usb 1-1.5: default language 0x0409
[ 4.439817] usb 1-1.5: udev 3, busnum 1, minor = 2
[ 4.439823] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b16c
[ 4.439828] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.439833] usb 1-1.5: Product: HP Webcam
[ 4.439837] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.439911] usb 1-1.5: uevent
[ 4.439931] usb 1-1.5: usb_probe_device
[ 4.439936] usb 1-1.5: configuration #1 chosen from 1 choice
[ 4.440208] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
[ 4.440699] usb 1-1.5:1.0: uevent
[ 4.440741] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1)
[ 4.440777] usb 1-1.5:1.1: uevent
[ 4.440795] drivers/usb/core/inode.c: creating file '003'
[ 4.441077] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
[ 4.513863] usb 1-1.6: new full speed USB device using ehci_hcd and address 4
[ 4.628529] usb 1-1.6: skipped 1 descriptor after interface
[ 4.628887] usb 1-1.6: default language 0x0409
[ 4.629638] usb 1-1.6: udev 4, busnum 1, minor = 3
[ 4.629644] usb 1-1.6: New USB device found, idVendor=03f0, idProduct=231d
[ 4.629650] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.629655] usb 1-1.6: Product: HP Integrated Module
[ 4.629658] usb 1-1.6: Manufacturer: Broadcom Corp
[ 4.629733] usb 1-1.6: uevent
[ 4.629753] usb 1-1.6: usb_probe_device
[ 4.629758] usb 1-1.6: configuration #1 chosen from 1 choice
[ 4.630024] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
[ 4.630058] usb 1-1.6:1.0: uevent
[ 4.630130] usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
[ 4.630151] usb 1-1.6:1.1: uevent
[ 4.630166] usb 1-1.6: adding 1-1.6:1.2 (config #1, interface 2)
[ 4.630175] usb 1-1.6:1.2: uevent
[ 4.630189] usb 1-1.6: adding 1-1.6:1.3 (config #1, interface 3)
[ 4.630197] usb 1-1.6:1.3: uevent
[ 4.630202] drivers/usb/core/inode.c: creating file '004'
[ 4.630213] hub 1-1:1.0: state 7 ports 8 chg 0000 evt 0040
[ 4.663562] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.663919] ata2.00: ATA-7: INTEL SSDSA1M160G2HP, 2CV102HA, max UDMA/100
[ 4.663927] ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.664628] ata2.00: configured for UDMA/100
[ 4.683569] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5
[ 4.683657] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.683661] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.683733] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.683736] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.683765] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.683839] sdb: unknown partition table
[ 4.685085] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.033129] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.053290] Freeing unused kernel memory: 692k freed
[ 5.053398] Write protecting the kernel read-only data: 7732k
[ 5.121902] usb usb1: uevent
[ 5.121920] usb 1-0:1.0: uevent
[ 5.121949] usb 1-1: uevent
[ 5.121975] usb 1-1.5: uevent
[ 5.122000] usb 1-1.5:1.0: uevent
[ 5.122021] usb 1-1.5:1.1: uevent
[ 5.122040] usb 1-1.6: uevent
[ 5.122064] usb 1-1.6:1.0: uevent
[ 5.122089] usb 1-1.6:1.1: uevent
[ 5.122114] usb 1-1.6:1.2: uevent
[ 5.122140] usb 1-1.6:1.3: uevent
[ 5.122166] usb 1-1:1.0: uevent
[ 5.132844] usb usb1: uevent
[ 5.149090] usb 1-1: uevent
[ 5.155922] usb 1-1.5: uevent
[ 5.155995] usb 1-1.6: uevent
[ 5.163862] acpi device:23: registered as cooling_device8
[ 5.178952] acpi device:25: registered as cooling_device9
[ 5.179102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/LNXVIDEO:01/input/input5
[ 5.179132] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 6.775462] PM: Starting manual resume from disk
[ 6.775465] PM: Resume from partition 252:2
[ 6.775466] PM: Checking hibernation image.
[ 6.775652] PM: Error -22 checking image file
[ 6.775654] PM: Resume from disk failed.
[ 6.790646] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 6.961771] Adding 16795916k swap on /dev/mapper/isw_cdfcbdcfed_RAID-01. Priority:-1 extents:1 across:16795916k
[ 7.010004] udev: starting version 147
[ 7.026844] usb usb1: uevent
[ 7.026871] usb 1-0:1.0: uevent
[ 7.026902] usb 1-1: uevent
[ 7.026930] usb 1-1.5: uevent
[ 7.026957] usb 1-1.5:1.0: uevent
[ 7.026985] usb 1-1.5:1.1: uevent
[ 7.027016] usb 1-1.6: uevent
[ 7.027043] usb 1-1.6:1.0: uevent
[ 7.027071] usb 1-1.6:1.1: uevent
[ 7.027098] usb 1-1.6:1.2: uevent
[ 7.027125] usb 1-1.6:1.3: uevent
[ 7.027151] usb 1-1:1.0: uevent
[ 7.035923] usb usb1: uevent
[ 7.046779] usb 1-1: uevent
[ 7.054996] usb 1-1.5: uevent
[ 7.059805] usb 1-1.6: uevent
[ 7.092567] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.092573] Disabling lock debugging due to kernel taint
[ 7.201187] [fglrx] Maximum main memory to use for locked dma buffers: 7762 MBytes.
[ 7.201520] [fglrx] vendor: 1002 device: 68a1 count: 1
[ 7.202093] [fglrx] ioport: bar 4, base 0x4000, size: 0x100
[ 7.202131] pci 0000:01:00.0: power state changed by ACPI to D0
[ 7.202142] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.202149] pci 0000:01:00.0: setting latency timer to 64
[ 7.202379] [fglrx] Kernel PAT support is enabled
[ 7.202399] [fglrx] module loaded - fglrx 8.70.3 [Feb 2 2010] with 1 minors
[ 7.242181] cfg80211: Calling CRDA to update world regulatory domain
[ 7.253362] atl1c 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.253378] atl1c 0000:04:00.0: setting latency timer to 64
[ 7.259963] cfg80211: World regulatory domain updated:
[ 7.259966] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.259969] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.259972] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.259975] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.259978] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.259980] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.262099] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.262165] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 7.262169] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 7.262179] drivers/usb/core/inode.c: creating file '002'
[ 7.262233] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 7.262246] xhci_hcd 0000:02:00.0: xHCI capability registers at ffffc90011790000:
[ 7.262251] xhci_hcd 0000:02:00.0: CAPLENGTH AND HCIVERSION 0x960020:
[ 7.262254] xhci_hcd 0000:02:00.0: CAPLENGTH: 0x20
[ 7.262257] xhci_hcd 0000:02:00.0: HCIVERSION: 0x96
[ 7.262260] xhci_hcd 0000:02:00.0: HCSPARAMS 1: 0x4000820
[ 7.262263] xhci_hcd 0000:02:00.0: Max device slots: 32
[ 7.262266] xhci_hcd 0000:02:00.0: Max interrupters: 8
[ 7.262268] xhci_hcd 0000:02:00.0: Max ports: 4
[ 7.262272] xhci_hcd 0000:02:00.0: HCSPARAMS 2: 0x11
[ 7.262274] xhci_hcd 0000:02:00.0: Isoc scheduling threshold: 1
[ 7.262277] xhci_hcd 0000:02:00.0: Maximum allowed segments in event ring: 1
[ 7.262281] xhci_hcd 0000:02:00.0: HCSPARAMS 3 0x0:
[ 7.262283] xhci_hcd 0000:02:00.0: Worst case U1 device exit latency: 0
[ 7.262285] xhci_hcd 0000:02:00.0: Worst case U2 device exit latency: 0
[ 7.262288] xhci_hcd 0000:02:00.0: HCC PARAMS 0x14042cb:
[ 7.262290] xhci_hcd 0000:02:00.0: HC generates 64 bit addresses
[ 7.262292] xhci_hcd 0000:02:00.0: FIXME: more HCCPARAMS debugging
[ 7.262295] xhci_hcd 0000:02:00.0: RTSOFF 0x600:
[ 7.262297] xhci_hcd 0000:02:00.0: xHCI operational registers at ffffc90011790020:
[ 7.262301] xhci_hcd 0000:02:00.0: USBCMD 0x0:
[ 7.262303] xhci_hcd 0000:02:00.0: HC is being stopped
[ 7.262304] xhci_hcd 0000:02:00.0: HC has finished hard reset
[ 7.262307] xhci_hcd 0000:02:00.0: Event Interrupts disabled
[ 7.262309] xhci_hcd 0000:02:00.0: Host System Error Interrupts disabled
[ 7.262311] xhci_hcd 0000:02:00.0: HC has finished light reset
[ 7.262314] xhci_hcd 0000:02:00.0: USBSTS 0x1:
[ 7.262316] xhci_hcd 0000:02:00.0: Event ring is empty
[ 7.262318] xhci_hcd 0000:02:00.0: No Host System Error
[ 7.262320] xhci_hcd 0000:02:00.0: HC is halted
[ 7.262323] xhci_hcd 0000:02:00.0: ffffc90011790420 port status reg = 0x2a0
[ 7.262327] xhci_hcd 0000:02:00.0: ffffc90011790424 port power reg = 0x0
[ 7.262330] xhci_hcd 0000:02:00.0: ffffc90011790428 port link reg = 0x0
[ 7.262334] xhci_hcd 0000:02:00.0: ffffc9001179042c port reserved reg = 0x0
[ 7.262337] xhci_hcd 0000:02:00.0: ffffc90011790430 port status reg = 0x2a0
[ 7.262341] xhci_hcd 0000:02:00.0: ffffc90011790434 port power reg = 0x0
[ 7.262344] xhci_hcd 0000:02:00.0: ffffc90011790438 port link reg = 0x0
[ 7.262348] xhci_hcd 0000:02:00.0: ffffc9001179043c port reserved reg = 0x0
[ 7.262351] xhci_hcd 0000:02:00.0: ffffc90011790440 port status reg = 0x2a0
[ 7.262354] xhci_hcd 0000:02:00.0: ffffc90011790444 port power reg = 0x0
[ 7.262358] xhci_hcd 0000:02:00.0: ffffc90011790448 port link reg = 0x0
[ 7.262361] xhci_hcd 0000:02:00.0: ffffc9001179044c port reserved reg = 0x0
[ 7.262364] xhci_hcd 0000:02:00.0: ffffc90011790450 port status reg = 0x2a0
[ 7.262368] xhci_hcd 0000:02:00.0: ffffc90011790454 port power reg = 0x0
[ 7.262371] xhci_hcd 0000:02:00.0: ffffc90011790458 port link reg = 0x0
[ 7.262374] xhci_hcd 0000:02:00.0: ffffc9001179045c port reserved reg = 0x0
[ 7.262376] xhci_hcd 0000:02:00.0: // Halt the HC
[ 7.262380] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h0, 4'hf);
[ 7.262384] xhci_hcd 0000:02:00.0: Resetting HCD
[ 7.262387] xhci_hcd 0000:02:00.0: // Reset the HC
[ 7.262390] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h2, 4'hf);
[ 7.262432] xhci_hcd 0000:02:00.0: Reset complete
[ 7.262434] xhci_hcd 0000:02:00.0: Calling HCD init
[ 7.262436] xhci_hcd 0000:02:00.0: xhci_init
[ 7.262438] xhci_hcd 0000:02:00.0: xHCI doesn't need link TRB QUIRK
[ 7.262441] xhci_hcd 0000:02:00.0: Supported page size register = 0x1
[ 7.262443] xhci_hcd 0000:02:00.0: Supported page size of 4K
[ 7.262445] xhci_hcd 0000:02:00.0: HCD page size set to 4K
[ 7.262448] xhci_hcd 0000:02:00.0: // xHC can handle at most 32 device slots.
[ 7.262451] xhci_hcd 0000:02:00.0: // Setting Max device slots reg = 0x20.
[ 7.262454] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790058, 32'h20, 4'hf);
[ 7.262487] xhci_hcd 0000:02:00.0: // Device context base array address = 0x37804000 (DMA), ffff880037804000 (virt)
[ 7.262493] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790050, 64'h37804000, 4'hf);
[ 7.262500] xhci_hcd 0000:02:00.0: Allocating ring at ffff8802279fc480
[ 7.262505] xhci_hcd 0000:02:00.0: Allocating priv segment structure at ffff8802327cc7c0
[ 7.262534] xhci_hcd 0000:02:00.0: // Allocating segment at ffff880037805000 (virtual) 0x37805000 (DMA)
[ 7.262541] xhci_hcd 0000:02:00.0: Linking segment 0x37805000 to segment 0x37805000 (DMA)
[ 7.262546] xhci_hcd 0000:02:00.0: Wrote link toggle flag to segment ffff8802327cc7c0 (virtual), 0x37805000 (DMA)
[ 7.262552] xhci_hcd 0000:02:00.0: Allocated command ring at ffff8802279fc480
[ 7.262564] xhci_hcd 0000:02:00.0: First segment DMA is 0x37805000
[ 7.262570] xhci_hcd 0000:02:00.0: // Setting command ring address to 0x20
[ 7.262575] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790038, 64'h37805001, 4'hf);
[ 7.262583] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 7.262588] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 7.262594] xhci_hcd 0000:02:00.0: // Doorbell array is located at offset 0x800 from cap regs base addr
[ 7.262600] xhci_hcd 0000:02:00.0: // xHCI capability registers at ffffc90011790000:
[ 7.262628] xhci_hcd 0000:02:00.0: // @ffffc90011790000 = 0x960020 (CAPLENGTH AND HCIVERSION)
[ 7.262632] xhci_hcd 0000:02:00.0: // CAPLENGTH: 0x20
[ 7.262636] xhci_hcd 0000:02:00.0: // xHCI operational registers at ffffc90011790020:
[ 7.262642] xhci_hcd 0000:02:00.0: // @ffffc90011790018 = 0x600 RTSOFF
[ 7.262646] xhci_hcd 0000:02:00.0: // xHCI runtime registers at ffffc90011790600:
[ 7.262652] xhci_hcd 0000:02:00.0: // @ffffc90011790014 = 0x800 DBOFF
[ 7.262656] xhci_hcd 0000:02:00.0: // Doorbell array at ffffc90011790800:
[ 7.262660] xhci_hcd 0000:02:00.0: xHCI runtime registers at ffffc90011790600:
[ 7.262679] xhci_hcd 0000:02:00.0: ffffc90011790600: Microframe index = 0x0
[ 7.262690] xhci_hcd 0000:02:00.0: // Allocating event ring
[ 7.262694] xhci_hcd 0000:02:00.0: Allocating ring at ffff8802279fcb40
[ 7.262698] xhci_hcd 0000:02:00.0: Allocating priv segment structure at ffff8802327cc7e0
[ 7.262704] xhci_hcd 0000:02:00.0: // Allocating segment at ffff880037805400 (virtual) 0x37805400 (DMA)
[ 7.262710] xhci_hcd 0000:02:00.0: Linking segment 0x37805400 to segment 0x37805400 (DMA)
[ 7.262716] xhci_hcd 0000:02:00.0: // Allocated event ring segment table at 0x37806000
[ 7.262721] xhci_hcd 0000:02:00.0: Set ERST to 0; private num segs = 1, virt addr = ffff880037806000, dma addr = 0x37806000
[ 7.262728] xhci_hcd 0000:02:00.0: // Write ERST size = 1 to ir_set 0 (some bits preserved)
[ 7.262733] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790628, 32'h1, 4'hf);
[ 7.262738] xhci_hcd 0000:02:00.0: // Set ERST entries to point to event ring.
[ 7.262743] xhci_hcd 0000:02:00.0: // Set ERST base address for ir_set 0 = 0x37806000
[ 7.262750] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790630, 64'h37806000, 4'hf);
[ 7.262758] xhci_hcd 0000:02:00.0: // Write event ring dequeue pointer, preserving EHB bit
[ 7.262763] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 64'hffffc90011790638, 64'h37805400, 4'hf);
[ 7.262769] xhci_hcd 0000:02:00.0: Wrote ERST address to ir_set 0.
[ 7.262786] xhci_hcd 0000:02:00.0: Allocating 0 scratchpad buffers
[ 7.262789] xhci_hcd 0000:02:00.0: Finished xhci_init
[ 7.262793] xhci_hcd 0000:02:00.0: Called HCD init
[ 7.262830] xhci_hcd 0000:02:00.0: Got SBRN 48
[ 7.262837] xhci_hcd 0000:02:00.0: MWI active
[ 7.262840] xhci_hcd 0000:02:00.0: Finished xhci_pci_reinit
[ 7.262845] xhci_hcd 0000:02:00.0: supports USB remote wakeup
[ 7.262862] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd4000000
[ 7.262866] xhci_hcd 0000:02:00.0: xhci_run
[ 7.262869] xhci_hcd 0000:02:00.0: Setting event ring polling timer
[ 7.262889] xhci_hcd 0000:02:00.0: Command ring memory map follows:
[ 7.262894] xhci_hcd 0000:02:00.0: @37805000 00000000 00000000 00000000 00000000
[ 7.262899] xhci_hcd 0000:02:00.0: @37805010 00000000 00000000 00000000 00000000
[ 7.262904] xhci_hcd 0000:02:00.0: @37805020 00000000 00000000 00000000 00000000
[ 7.262909] xhci_hcd 0000:02:00.0: @37805030 00000000 00000000 00000000 00000000
[ 7.262913] xhci_hcd 0000:02:00.0: @37805040 00000000 00000000 00000000 00000000
[ 7.262918] xhci_hcd 0000:02:00.0: @37805050 00000000 00000000 00000000 00000000
[ 7.262922] xhci_hcd 0000:02:00.0: @37805060 00000000 00000000 00000000 00000000
[ 7.262927] xhci_hcd 0000:02:00.0: @37805070 00000000 00000000 00000000 00000000
[ 7.262932] xhci_hcd 0000:02:00.0: @37805080 00000000 00000000 00000000 00000000
[ 7.262953] xhci_hcd 0000:02:00.0: @37805090 00000000 00000000 00000000 00000000
[ 7.262958] xhci_hcd 0000:02:00.0: @378050a0 00000000 00000000 00000000 00000000
[ 7.262963] xhci_hcd 0000:02:00.0: @378050b0 00000000 00000000 00000000 00000000
[ 7.262967] xhci_hcd 0000:02:00.0: @378050c0 00000000 00000000 00000000 00000000
[ 7.262971] xhci_hcd 0000:02:00.0: @378050d0 00000000 00000000 00000000 00000000
[ 7.262976] xhci_hcd 0000:02:00.0: @378050e0 00000000 00000000 00000000 00000000
[ 7.262981] xhci_hcd 0000:02:00.0: @378050f0 00000000 00000000 00000000 00000000
[ 7.262986] xhci_hcd 0000:02:00.0: @37805100 00000000 00000000 00000000 00000000
[ 7.262990] xhci_hcd 0000:02:00.0: @37805110 00000000 00000000 00000000 00000000
[ 7.262994] xhci_hcd 0000:02:00.0: @37805120 00000000 00000000 00000000 00000000
[ 7.263000] xhci_hcd 0000:02:00.0: @37805130 00000000 00000000 00000000 00000000
[ 7.263005] xhci_hcd 0000:02:00.0: @37805140 00000000 00000000 00000000 00000000
[ 7.263009] xhci_hcd 0000:02:00.0: @37805150 00000000 00000000 00000000 00000000
[ 7.263014] xhci_hcd 0000:02:00.0: @37805160 00000000 00000000 00000000 00000000
[ 7.263019] xhci_hcd 0000:02:00.0: @37805170 00000000 00000000 00000000 00000000
[ 7.263023] xhci_hcd 0000:02:00.0: @37805180 00000000 00000000 00000000 00000000
[ 7.263028] xhci_hcd 0000:02:00.0: @37805190 00000000 00000000 00000000 00000000
[ 7.263032] xhci_hcd 0000:02:00.0: @378051a0 00000000 00000000 00000000 00000000
[ 7.263037] xhci_hcd 0000:02:00.0: @378051b0 00000000 00000000 00000000 00000000
[ 7.263041] xhci_hcd 0000:02:00.0: @378051c0 00000000 00000000 00000000 00000000
[ 7.263046] xhci_hcd 0000:02:00.0: @378051d0 00000000 00000000 00000000 00000000
[ 7.263051] xhci_hcd 0000:02:00.0: @378051e0 00000000 00000000 00000000 00000000
[ 7.263056] xhci_hcd 0000:02:00.0: @378051f0 00000000 00000000 00000000 00000000
[ 7.263060] xhci_hcd 0000:02:00.0: @37805200 00000000 00000000 00000000 00000000
[ 7.263065] xhci_hcd 0000:02:00.0: @37805210 00000000 00000000 00000000 00000000
[ 7.263069] xhci_hcd 0000:02:00.0: @37805220 00000000 00000000 00000000 00000000
[ 7.263075] xhci_hcd 0000:02:00.0: @37805230 00000000 00000000 00000000 00000000
[ 7.263080] xhci_hcd 0000:02:00.0: @37805240 00000000 00000000 00000000 00000000
[ 7.263084] xhci_hcd 0000:02:00.0: @37805250 00000000 00000000 00000000 00000000
[ 7.263090] xhci_hcd 0000:02:00.0: @37805260 00000000 00000000 00000000 00000000
[ 7.263094] xhci_hcd 0000:02:00.0: @37805270 00000000 00000000 00000000 00000000
[ 7.263099] xhci_hcd 0000:02:00.0: @37805280 00000000 00000000 00000000 00000000
[ 7.263104] xhci_hcd 0000:02:00.0: @37805290 00000000 00000000 00000000 00000000
[ 7.263109] xhci_hcd 0000:02:00.0: @378052a0 00000000 00000000 00000000 00000000
[ 7.263113] xhci_hcd 0000:02:00.0: @378052b0 00000000 00000000 00000000 00000000
[ 7.263118] xhci_hcd 0000:02:00.0: @378052c0 00000000 00000000 00000000 00000000
[ 7.263123] xhci_hcd 0000:02:00.0: @378052d0 00000000 00000000 00000000 00000000
[ 7.263129] xhci_hcd 0000:02:00.0: @378052e0 00000000 00000000 00000000 00000000
[ 7.263133] xhci_hcd 0000:02:00.0: @378052f0 00000000 00000000 00000000 00000000
[ 7.263138] xhci_hcd 0000:02:00.0: @37805300 00000000 00000000 00000000 00000000
[ 7.263143] xhci_hcd 0000:02:00.0: @37805310 00000000 00000000 00000000 00000000
[ 7.263148] xhci_hcd 0000:02:00.0: @37805320 00000000 00000000 00000000 00000000
[ 7.263153] xhci_hcd 0000:02:00.0: @37805330 00000000 00000000 00000000 00000000
[ 7.263158] xhci_hcd 0000:02:00.0: @37805340 00000000 00000000 00000000 00000000
[ 7.263163] xhci_hcd 0000:02:00.0: @37805350 00000000 00000000 00000000 00000000
[ 7.263168] xhci_hcd 0000:02:00.0: @37805360 00000000 00000000 00000000 00000000
[ 7.263172] xhci_hcd 0000:02:00.0: @37805370 00000000 00000000 00000000 00000000
[ 7.263177] xhci_hcd 0000:02:00.0: @37805380 00000000 00000000 00000000 00000000
[ 7.263182] xhci_hcd 0000:02:00.0: @37805390 00000000 00000000 00000000 00000000
[ 7.263187] xhci_hcd 0000:02:00.0: @378053a0 00000000 00000000 00000000 00000000
[ 7.263191] xhci_hcd 0000:02:00.0: @378053b0 00000000 00000000 00000000 00000000
[ 7.263196] xhci_hcd 0000:02:00.0: @378053c0 00000000 00000000 00000000 00000000
[ 7.263201] xhci_hcd 0000:02:00.0: @378053d0 00000000 00000000 00000000 00000000
[ 7.263205] xhci_hcd 0000:02:00.0: @378053e0 00000000 00000000 00000000 00000000
[ 7.263210] xhci_hcd 0000:02:00.0: @378053f0 37805000 00000000 00000000 00001802
[ 7.263215] xhci_hcd 0000:02:00.0: Ring has not been updated
[ 7.263220] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805000 (virt), 0x37805000 (dma)
[ 7.263224] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 7.263228] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805000 (virt), 0x37805000 (dma)
[ 7.263233] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 7.263238] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 7.263243] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 7.263247] xhci_hcd 0000:02:00.0: ERST memory map follows:
[ 7.263251] xhci_hcd 0000:02:00.0: @37806000 37805400 00000000 00000040 00000000
[ 7.263256] xhci_hcd 0000:02:00.0: Event ring:
[ 7.263259] xhci_hcd 0000:02:00.0: @37805400 00000000 00000000 00000000 00000000
[ 7.263304] xhci_hcd 0000:02:00.0: @37805410 00000000 00000000 00000000 00000000
[ 7.263309] xhci_hcd 0000:02:00.0: @37805420 00000000 00000000 00000000 00000000
[ 7.263314] xhci_hcd 0000:02:00.0: @37805430 00000000 00000000 00000000 00000000
[ 7.263319] xhci_hcd 0000:02:00.0: @37805440 00000000 00000000 00000000 00000000
[ 7.263323] xhci_hcd 0000:02:00.0: @37805450 00000000 00000000 00000000 00000000
[ 7.263329] xhci_hcd 0000:02:00.0: @37805460 00000000 00000000 00000000 00000000
[ 7.263333] xhci_hcd 0000:02:00.0: @37805470 00000000 00000000 00000000 00000000
[ 7.263339] xhci_hcd 0000:02:00.0: @37805480 00000000 00000000 00000000 00000000
[ 7.263344] xhci_hcd 0000:02:00.0: @37805490 00000000 00000000 00000000 00000000
[ 7.263349] xhci_hcd 0000:02:00.0: @378054a0 00000000 00000000 00000000 00000000
[ 7.263354] xhci_hcd 0000:02:00.0: @378054b0 00000000 00000000 00000000 00000000
[ 7.263359] xhci_hcd 0000:02:00.0: @378054c0 00000000 00000000 00000000 00000000
[ 7.263364] xhci_hcd 0000:02:00.0: @378054d0 00000000 00000000 00000000 00000000
[ 7.263369] xhci_hcd 0000:02:00.0: @378054e0 00000000 00000000 00000000 00000000
[ 7.263374] xhci_hcd 0000:02:00.0: @378054f0 00000000 00000000 00000000 00000000
[ 7.263379] xhci_hcd 0000:02:00.0: @37805500 00000000 00000000 00000000 00000000
[ 7.263384] xhci_hcd 0000:02:00.0: @37805510 00000000 00000000 00000000 00000000
[ 7.263389] xhci_hcd 0000:02:00.0: @37805520 00000000 00000000 00000000 00000000
[ 7.263394] xhci_hcd 0000:02:00.0: @37805530 00000000 00000000 00000000 00000000
[ 7.263399] xhci_hcd 0000:02:00.0: @37805540 00000000 00000000 00000000 00000000
[ 7.263404] xhci_hcd 0000:02:00.0: @37805550 00000000 00000000 00000000 00000000
[ 7.263408] xhci_hcd 0000:02:00.0: @37805560 00000000 00000000 00000000 00000000
[ 7.263413] xhci_hcd 0000:02:00.0: @37805570 00000000 00000000 00000000 00000000
[ 7.263418] xhci_hcd 0000:02:00.0: @37805580 00000000 00000000 00000000 00000000
[ 7.263446] xhci_hcd 0000:02:00.0: @37805590 00000000 00000000 00000000 00000000
[ 7.263451] xhci_hcd 0000:02:00.0: @378055a0 00000000 00000000 00000000 00000000
[ 7.263456] xhci_hcd 0000:02:00.0: @378055b0 00000000 00000000 00000000 00000000
[ 7.263461] xhci_hcd 0000:02:00.0: @378055c0 00000000 00000000 00000000 00000000
[ 7.263466] xhci_hcd 0000:02:00.0: @378055d0 00000000 00000000 00000000 00000000
[ 7.263471] xhci_hcd 0000:02:00.0: @378055e0 00000000 00000000 00000000 00000000
[ 7.263475] xhci_hcd 0000:02:00.0: @378055f0 00000000 00000000 00000000 00000000
[ 7.263495] xhci_hcd 0000:02:00.0: @37805600 00000000 00000000 00000000 00000000
[ 7.263500] xhci_hcd 0000:02:00.0: @37805610 00000000 00000000 00000000 00000000
[ 7.263505] xhci_hcd 0000:02:00.0: @37805620 00000000 00000000 00000000 00000000
[ 7.263509] xhci_hcd 0000:02:00.0: @37805630 00000000 00000000 00000000 00000000
[ 7.263514] xhci_hcd 0000:02:00.0: @37805640 00000000 00000000 00000000 00000000
[ 7.263519] xhci_hcd 0000:02:00.0: @37805650 00000000 00000000 00000000 00000000
[ 7.263524] xhci_hcd 0000:02:00.0: @37805660 00000000 00000000 00000000 00000000
[ 7.263529] xhci_hcd 0000:02:00.0: @37805670 00000000 00000000 00000000 00000000
[ 7.263549] xhci_hcd 0000:02:00.0: @37805680 00000000 00000000 00000000 00000000
[ 7.263554] xhci_hcd 0000:02:00.0: @37805690 00000000 00000000 00000000 00000000
[ 7.263559] xhci_hcd 0000:02:00.0: @378056a0 00000000 00000000 00000000 00000000
[ 7.263563] xhci_hcd 0000:02:00.0: @378056b0 00000000 00000000 00000000 00000000
[ 7.263568] xhci_hcd 0000:02:00.0: @378056c0 00000000 00000000 00000000 00000000
[ 7.263573] xhci_hcd 0000:02:00.0: @378056d0 00000000 00000000 00000000 00000000
[ 7.263578] xhci_hcd 0000:02:00.0: @378056e0 00000000 00000000 00000000 00000000
[ 7.263582] xhci_hcd 0000:02:00.0: @378056f0 00000000 00000000 00000000 00000000
[ 7.263587] xhci_hcd 0000:02:00.0: @37805700 00000000 00000000 00000000 00000000
[ 7.263592] xhci_hcd 0000:02:00.0: @37805710 00000000 00000000 00000000 00000000
[ 7.263596] xhci_hcd 0000:02:00.0: @37805720 00000000 00000000 00000000 00000000
[ 7.263601] xhci_hcd 0000:02:00.0: @37805730 00000000 00000000 00000000 00000000
[ 7.263606] xhci_hcd 0000:02:00.0: @37805740 00000000 00000000 00000000 00000000
[ 7.263611] xhci_hcd 0000:02:00.0: @37805750 00000000 00000000 00000000 00000000
[ 7.263616] xhci_hcd 0000:02:00.0: @37805760 00000000 00000000 00000000 00000000
[ 7.263621] xhci_hcd 0000:02:00.0: @37805770 00000000 00000000 00000000 00000000
[ 7.263626] xhci_hcd 0000:02:00.0: @37805780 00000000 00000000 00000000 00000000
[ 7.263631] xhci_hcd 0000:02:00.0: @37805790 00000000 00000000 00000000 00000000
[ 7.263636] xhci_hcd 0000:02:00.0: @378057a0 00000000 00000000 00000000 00000000
[ 7.263641] xhci_hcd 0000:02:00.0: @378057b0 00000000 00000000 00000000 00000000
[ 7.263645] xhci_hcd 0000:02:00.0: @378057c0 00000000 00000000 00000000 00000000
[ 7.263650] xhci_hcd 0000:02:00.0: @378057d0 00000000 00000000 00000000 00000000
[ 7.263655] xhci_hcd 0000:02:00.0: @378057e0 00000000 00000000 00000000 00000000
[ 7.263660] xhci_hcd 0000:02:00.0: @378057f0 00000000 00000000 00000000 00000000
[ 7.263664] xhci_hcd 0000:02:00.0: Ring has not been updated
[ 7.263669] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805400 (virt), 0x37805400 (dma)
[ 7.263673] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 7.263677] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805400 (virt), 0x37805400 (dma)
[ 7.263683] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 7.263688] xhci_hcd 0000:02:00.0: ERST deq = 64'h37805400
[ 7.263692] xhci_hcd 0000:02:00.0: // Set the interrupt modulation register
[ 7.263697] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790624, 32'ha0, 4'hf);
[ 7.263712] xhci_hcd 0000:02:00.0: // Enable interrupts, cmd = 0x4.
[ 7.263716] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h4, 4'hf);
[ 7.263723] xhci_hcd 0000:02:00.0: // Enabling event ring interrupter ffffc90011790620 by writing 0x2 to irq_pending
[ 7.263730] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790620, 32'h2, 4'hf);
[ 7.263737] xhci_hcd 0000:02:00.0: ffffc90011790620: ir_set[0]
[ 7.263741] xhci_hcd 0000:02:00.0: ffffc90011790620: ir_set.pending = 0x2
[ 7.263747] xhci_hcd 0000:02:00.0: ffffc90011790624: ir_set.control = 0xa0
[ 7.263753] xhci_hcd 0000:02:00.0: ffffc90011790628: ir_set.erst_size = 0x1
[ 7.263761] xhci_hcd 0000:02:00.0: ffffc90011790630: ir_set.erst_base = @37806000
[ 7.263770] xhci_hcd 0000:02:00.0: ffffc90011790638: ir_set.erst_dequeue = @37805400
[ 7.263777] xhci_hcd 0000:02:00.0: // Turn on HC, cmd = 0x5.
[ 7.263783] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790020, 32'h5, 4'hf);
[ 7.263791] xhci_hcd 0000:02:00.0: // @ffffc90011790020 = 0x5
[ 7.263796] xhci_hcd 0000:02:00.0: Finished xhci_run
[ 7.263842] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 7.263853] usb usb2: default language 0x0409
[ 7.263865] usb usb2: udev 1, busnum 2, minor = 128
[ 7.263870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.263877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.263883] usb usb2: Product: xHCI Host Controller
[ 7.263888] usb usb2: Manufacturer: Linux 2.6.32.8-usb-debug xhci_hcd
[ 7.263894] usb usb2: SerialNumber: 0000:02:00.0
[ 7.263960] usb usb2: uevent
[ 7.263985] usb usb2: usb_probe_device
[ 7.263992] usb usb2: configuration #1 chosen from 1 choice
[ 7.263998] xHCI xhci_add_endpoint called for root hub
[ 7.264004] xHCI xhci_check_bandwidth called for root hub
[ 7.264015] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.264041] usb 2-0:1.0: uevent
[ 7.264087] hub 2-0:1.0: usb_probe_interface
[ 7.264092] hub 2-0:1.0: usb_probe_interface - got id
[ 7.264098] hub 2-0:1.0: USB hub found
[ 7.264109] hub 2-0:1.0: 4 ports detected
[ 7.264114] hub 2-0:1.0: standalone hub
[ 7.264118] hub 2-0:1.0: individual port power switching
[ 7.264122] hub 2-0:1.0: individual port over-current protection
[ 7.264128] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 7.264134] hub 2-0:1.0: power on to power good time: 20ms
[ 7.264143] hub 2-0:1.0: local power source is good
[ 7.264146] hub 2-0:1.0: enabling power on all ports
[ 7.264154] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790420, 32'h2a0, 4'hf);
[ 7.264163] xhci_hcd 0000:02:00.0: set port power, actual port 0 status = 0x2a0
[ 7.264174] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790430, 32'h2a0, 4'hf);
[ 7.264183] xhci_hcd 0000:02:00.0: set port power, actual port 1 status = 0x2a0
[ 7.264194] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790440, 32'h2a0, 4'hf);
[ 7.264204] xhci_hcd 0000:02:00.0: set port power, actual port 2 status = 0x2a0
[ 7.264214] xhci_hcd 0000:02:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90011790450, 32'h2a0, 4'hf);
[ 7.264223] xhci_hcd 0000:02:00.0: set port power, actual port 3 status = 0x2a0
[ 7.264255] drivers/usb/core/inode.c: creating file '001'
[ 7.267772] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.267791] btusb 1-1.6:1.0: usb_probe_interface
[ 7.267797] btusb 1-1.6:1.0: usb_probe_interface - got id
[ 7.267900] btusb 1-1.6:1.2: usb_probe_interface
[ 7.267906] btusb 1-1.6:1.2: usb_probe_interface - got id
[ 7.267919] btusb 1-1.6:1.3: usb_probe_interface
[ 7.267924] btusb 1-1.6:1.3: usb_probe_interface - got id
[ 7.267949] usbcore: registered new interface driver btusb
[ 7.281838] Linux video capture interface: v2.00
[ 7.303420] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.303424] Bluetooth: BNEP filters: protocol multicast
[ 7.306697] usb usb2: uevent
[ 7.322362] uvcvideo 1-1.5:1.0: usb_probe_interface
[ 7.322368] uvcvideo 1-1.5:1.0: usb_probe_interface - got id
[ 7.322382] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b16c)
[ 7.323608] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
[ 7.323689] usbcore: registered new interface driver uvcvideo
[ 7.323696] USB Video Class driver (v0.1.0)
[ 7.337038] usb usb2: uevent
[ 7.337165] usb 2-0:1.0: uevent
[ 7.338146] usb usb1: uevent
[ 7.338252] usb 1-0:1.0: uevent
[ 7.338309] usb 1-1: uevent
[ 7.338393] usb 1-1.5: uevent
[ 7.338477] usb 1-1.5:1.0: uevent
[ 7.338684] usb 1-1.5:1.1: uevent
[ 7.338742] usb 1-1.6: uevent
[ 7.338843] usb 1-1.6:1.0: uevent
[ 7.338987] usb 1-1.6:1.1: uevent
[ 7.339039] usb 1-1.6:1.2: uevent
[ 7.339089] usb 1-1.6:1.3: uevent
[ 7.339141] usb 1-1:1.0: uevent
[ 7.343294] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.345756] lp: driver loaded but no devices found
[ 7.363944] atl1c 0000:04:00.0: version 1.0.0.1-NAPI
[ 7.372854] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 7.372860] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372870] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 7.372872] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372881] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 7.372884] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372889] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 7.372893] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7.372901] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 7.473553] usb 1-1.5: link qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.473593] usb 1-1.5: unlink qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.474511] alloc irq_desc for 34 on node -1
[ 7.474516] alloc kstat_irqs on node -1
[ 7.474534] atl1c 0000:04:00.0: irq 34 for MSI/MSI-X
[ 7.474604] usb 1-1.5:1.0: uevent
[ 7.474763] usb 1-1.5: uevent
[ 7.475838] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.477174] usb 1-1.5:1.0: uevent
[ 7.477286] usb 1-1.5: uevent
[ 7.477377] usb 1-1.5:1.0: uevent
[ 7.478672] usb 1-1.5:1.0: uevent
[ 7.483707] ehci_hcd 0000:00:1d.0: reused qh ffff8802273e3b80 schedule
[ 7.483713] usb 1-1.5: link qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.485980] usb 1-1.5: unlink qh16-0001/ffff8802273e3b80 start 2 [1/0 us]
[ 7.498976] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 7.498979] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.499102] iwlagn 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.499131] iwlagn 0000:03:00.0: setting latency timer to 64
[ 7.500008] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 6000 Series 2x2 AGN REV=0x74
[ 7.521753] Bridge firewalling registered
[ 7.523329] lis3lv02d: laptop model unknown, using default axes configuration
[ 7.524250] lis3lv02d: 1-byte sensor found
[ 7.536767] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 7.536871] Registered led device: hp::hddprotect
[ 7.536897] lis3lv02d driver loaded.
[ 7.536916] usb 1-1.6: link qh1-0e01/ffff88022b443800 start 0 [1/2 us]
[ 7.541636] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.541702] alloc irq_desc for 35 on node -1
[ 7.541706] alloc kstat_irqs on node -1
[ 7.541727] iwlagn 0000:03:00.0: irq 35 for MSI/MSI-X
[ 7.553682] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.564911] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6000-4.ucode
[ 7.574355] iwlagn 0000:03:00.0: loaded firmware version 9.176.4.1
[ 7.641653] alloc irq_desc for 22 on node -1
[ 7.641656] alloc kstat_irqs on node -1
[ 7.641663] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.641844] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.768846] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.784549] CE: hpet increasing min_delta_ns to 15000 nsec
[ 7.869054] Registered led device: iwl-phy0::radio
[ 7.869080] Registered led device: iwl-phy0::assoc
[ 7.869109] Registered led device: iwl-phy0::RX
[ 7.869138] Registered led device: iwl-phy0::TX
[ 8.220232] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000
[ 8.220234] Synaptics: Clickpad mode enabled
[ 8.291150] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 8.502848] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.802668] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00bf0900
[ 8.802822] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.802885] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.803998] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.804064] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.816013] ppdev: user-space parallel port driver
[ 8.879290] usb usb2: uevent
[ 8.886974] usb usb1: uevent
[ 8.890948] usb usb1: uevent
[ 8.894843] usb 1-1: uevent
[ 8.900160] usb 1-1.5: uevent
[ 8.904769] usb 1-1.5: uevent
[ 8.909861] usb 1-1: uevent
[ 8.913872] usb 1-1.6: uevent
[ 8.917868] usb 1-1.6: uevent
[ 8.921796] usb 1-1.6: uevent
[ 8.925766] usb 1-1.6: uevent
[ 8.929854] usb 1-1: uevent
[ 9.164117] CPU0 attaching NULL sched-domain.
[ 9.164126] CPU1 attaching NULL sched-domain.
[ 9.164130] CPU2 attaching NULL sched-domain.
[ 9.164134] CPU3 attaching NULL sched-domain.
[ 9.164138] CPU4 attaching NULL sched-domain.
[ 9.164142] CPU5 attaching NULL sched-domain.
[ 9.164146] CPU6 attaching NULL sched-domain.
[ 9.164149] CPU7 attaching NULL sched-domain.
[ 9.321742] CPU0 attaching sched-domain:
[ 9.321745] domain 0: span 0,4 level SIBLING
[ 9.321747] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 9.321751] domain 1: span 0-7 level MC
[ 9.321753] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 9.321760] CPU1 attaching sched-domain:
[ 9.321762] domain 0: span 1,5 level SIBLING
[ 9.321763] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 9.321767] domain 1: span 0-7 level MC
[ 9.321768] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 9.321775] CPU2 attaching sched-domain:
[ 9.321776] domain 0: span 2,6 level SIBLING
[ 9.321778] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 9.321781] domain 1: span 0-7 level MC
[ 9.321783] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 9.321789] CPU3 attaching sched-domain:
[ 9.321791] domain 0: span 3,7 level SIBLING
[ 9.321792] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 9.321796] domain 1: span 0-7 level MC
[ 9.321797] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 9.321804] CPU4 attaching sched-domain:
[ 9.321805] domain 0: span 0,4 level SIBLING
[ 9.321806] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 9.321810] domain 1: span 0-7 level MC
[ 9.321812] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 9.321818] CPU5 attaching sched-domain:
[ 9.321819] domain 0: span 1,5 level SIBLING
[ 9.321821] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 9.321824] domain 1: span 0-7 level MC
[ 9.321826] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 9.321832] CPU6 attaching sched-domain:
[ 9.321833] domain 0: span 2,6 level SIBLING
[ 9.321835] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 9.321839] domain 1: span 0-7 level MC
[ 9.321840] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 9.321846] CPU7 attaching sched-domain:
[ 9.321848] domain 0: span 3,7 level SIBLING
[ 9.321849] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 9.321853] domain 1: span 0-7 level MC
[ 9.321854] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 9.340832] usplash:555 freeing invalid memtype ffffffffc0000000-ffffffffc1000000
[ 9.801861] alloc irq_desc for 36 on node -1
[ 9.801863] alloc kstat_irqs on node -1
[ 9.801871] fglrx_pci 0000:01:00.0: irq 36 for MSI/MSI-X
[ 9.802367] [fglrx] Firegl kernel thread PID: 2065
[ 9.910087] [fglrx] Gart USWC size:1279 M.
[ 9.910089] [fglrx] Gart cacheable size:508 M.
[ 9.910093] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 9.910094] [fglrx] Reserved FB block: Unshared offset:f8ff000, size:401000
[ 9.910096] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 11.216451] hub 2-0:1.0: hub_suspend
[ 11.216459] usb usb2: bus auto-suspend
[ 11.216462] usb usb2: bus suspend fail, err -2
[ 11.216464] hub 2-0:1.0: hub_resume
[ 11.216474] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 11.216477] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216486] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 11.216489] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216494] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 11.216496] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216503] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 11.216505] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 11.216516] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 11.939537] usb usb1: uevent
[ 11.939594] usb 1-0:1.0: uevent
[ 11.939629] usb 1-1: uevent
[ 11.939679] usb 1-1:1.0: uevent
[ 11.939714] usb 1-1.5: uevent
[ 11.939766] usb 1-1.5:1.0: uevent
[ 11.939801] usb 1-1.5:1.1: uevent
[ 11.939836] usb 1-1.6: uevent
[ 11.939887] usb 1-1.6:1.0: uevent
[ 11.939928] usb 1-1.6:1.1: uevent
[ 11.939968] usb 1-1.6:1.2: uevent
[ 11.940008] usb 1-1.6:1.3: uevent
[ 11.940043] usb usb2: uevent
[ 11.940095] usb 2-0:1.0: uevent
[ 12.046746] usb usb2: uevent
[ 12.047210] usb 2-0:1.0: uevent
[ 12.047553] usb usb1: uevent
[ 12.047942] usb 1-0:1.0: uevent
[ 12.048279] usb 1-1: uevent
[ 12.048674] usb 1-1.5: uevent
[ 12.049067] usb 1-1.5:1.0: uevent
[ 12.049614] usb 1-1.5:1.1: uevent
[ 12.050015] usb 1-1.6: uevent
[ 12.050413] usb 1-1.6:1.0: uevent
[ 12.050747] usb 1-1.6:1.1: uevent
[ 12.051077] usb 1-1.6:1.2: uevent
[ 12.051414] usb 1-1.6:1.3: uevent
[ 12.051747] usb 1-1:1.0: uevent
[ 12.140469] CPU0 attaching NULL sched-domain.
[ 12.140474] CPU1 attaching NULL sched-domain.
[ 12.140475] CPU2 attaching NULL sched-domain.
[ 12.140477] CPU3 attaching NULL sched-domain.
[ 12.140479] CPU4 attaching NULL sched-domain.
[ 12.140480] CPU5 attaching NULL sched-domain.
[ 12.140482] CPU6 attaching NULL sched-domain.
[ 12.140483] CPU7 attaching NULL sched-domain.
[ 12.238511] CPU0 attaching sched-domain:
[ 12.238516] domain 0: span 0,4 level SIBLING
[ 12.238518] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 12.238524] domain 1: span 0-7 level MC
[ 12.238527] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 12.238537] CPU1 attaching sched-domain:
[ 12.238539] domain 0: span 1,5 level SIBLING
[ 12.238541] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 12.238546] domain 1: span 0-7 level MC
[ 12.238549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 12.238557] CPU2 attaching sched-domain:
[ 12.238559] domain 0: span 2,6 level SIBLING
[ 12.238561] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 12.238566] domain 1: span 0-7 level MC
[ 12.238569] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 12.238577] CPU3 attaching sched-domain:
[ 12.238579] domain 0: span 3,7 level SIBLING
[ 12.238581] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 12.238586] domain 1: span 0-7 level MC
[ 12.238588] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 12.238597] CPU4 attaching sched-domain:
[ 12.238599] domain 0: span 0,4 level SIBLING
[ 12.238601] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 12.238606] domain 1: span 0-7 level MC
[ 12.238608] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 12.238617] CPU5 attaching sched-domain:
[ 12.238619] domain 0: span 1,5 level SIBLING
[ 12.238621] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 12.238626] domain 1: span 0-7 level MC
[ 12.238628] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 12.238637] CPU6 attaching sched-domain:
[ 12.238639] domain 0: span 2,6 level SIBLING
[ 12.238641] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 12.238646] domain 1: span 0-7 level MC
[ 12.238648] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 12.238657] CPU7 attaching sched-domain:
[ 12.238659] domain 0: span 3,7 level SIBLING
[ 12.238661] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 12.238666] domain 1: span 0-7 level MC
[ 12.238668] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 12.962613] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 14.123326] hub 2-0:1.0: hub_suspend
[ 14.123340] usb usb2: bus auto-suspend
[ 14.123345] usb usb2: bus suspend fail, err -2
[ 14.123349] hub 2-0:1.0: hub_resume
[ 14.123360] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 14.123365] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123378] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 14.123382] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123392] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 14.123396] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123405] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 14.123410] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 14.123519] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 16.604428] usb usb1: uevent
[ 16.604484] usb 1-0:1.0: uevent
[ 16.604520] usb 1-1: uevent
[ 16.604570] usb 1-1:1.0: uevent
[ 16.604606] usb 1-1.5: uevent
[ 16.604657] usb 1-1.5:1.0: uevent
[ 16.604692] usb 1-1.5:1.1: uevent
[ 16.604728] usb 1-1.6: uevent
[ 16.604779] usb 1-1.6:1.0: uevent
[ 16.604815] usb 1-1.6:1.1: uevent
[ 16.604849] usb 1-1.6:1.2: uevent
[ 16.604890] usb 1-1.6:1.3: uevent
[ 16.604931] usb usb2: uevent
[ 16.604991] usb 2-0:1.0: uevent
[ 16.675770] usb usb1: uevent
[ 16.675826] usb 1-0:1.0: uevent
[ 16.675861] usb 1-1: uevent
[ 16.675911] usb 1-1:1.0: uevent
[ 16.675946] usb 1-1.5: uevent
[ 16.675998] usb 1-1.5:1.0: uevent
[ 16.676034] usb 1-1.5:1.1: uevent
[ 16.676069] usb 1-1.6: uevent
[ 16.676120] usb 1-1.6:1.0: uevent
[ 16.676155] usb 1-1.6:1.1: uevent
[ 16.676190] usb 1-1.6:1.2: uevent
[ 16.676224] usb 1-1.6:1.3: uevent
[ 16.676259] usb usb2: uevent
[ 16.676310] usb 2-0:1.0: uevent
[ 17.120075] hub 2-0:1.0: hub_suspend
[ 17.120088] usb usb2: bus auto-suspend
[ 17.120093] usb usb2: bus suspend fail, err -2
[ 17.120097] hub 2-0:1.0: hub_resume
[ 17.120108] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 17.120112] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120124] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 17.120129] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120138] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 17.120142] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120152] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 17.120156] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 17.120238] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 19.902173] usb usb2: uevent
[ 19.902284] usb 2-0:1.0: uevent
[ 19.902352] usb usb1: uevent
[ 19.902453] usb 1-0:1.0: uevent
[ 19.902524] usb 1-1: uevent
[ 19.902626] usb 1-1.5: uevent
[ 19.902729] usb 1-1.5:1.0: uevent
[ 19.902793] usb 1-1.5:1.1: uevent
[ 19.902863] usb 1-1.6: uevent
[ 19.902970] usb 1-1.6:1.0: uevent
[ 19.903035] usb 1-1.6:1.1: uevent
[ 19.903099] usb 1-1.6:1.2: uevent
[ 19.903161] usb 1-1.6:1.3: uevent
[ 19.903224] usb 1-1:1.0: uevent
[ 20.118588] hub 2-0:1.0: hub_suspend
[ 20.118601] usb usb2: bus auto-suspend
[ 20.118606] usb usb2: bus suspend fail, err -2
[ 20.118611] hub 2-0:1.0: hub_resume
[ 20.118624] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 20.118629] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118640] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 20.118644] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118652] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 20.118657] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118667] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 20.118671] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 20.118699] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 23.114506] hub 2-0:1.0: hub_suspend
[ 23.114517] usb usb2: bus auto-suspend
[ 23.114520] usb usb2: bus suspend fail, err -2
[ 23.114523] hub 2-0:1.0: hub_resume
[ 23.114535] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 23.114538] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114548] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 23.114552] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114559] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 23.114562] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114568] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 23.114571] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 23.114589] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 25.550897] wlan0: deauthenticating from 00:1c:10:88:97:b6 by local choice (reason=3)
[ 25.550964] wlan0: direct probe to AP 00:1c:10:88:97:b6 (try 1)
[ 25.555864] wlan0: direct probe responded
[ 25.555871] wlan0: authenticate with AP 00:1c:10:88:97:b6 (try 1)
[ 25.557805] wlan0: authenticated
[ 25.557835] wlan0: associate with AP 00:1c:10:88:97:b6 (try 1)
[ 25.560456] wlan0: RX AssocResp from 00:1c:10:88:97:b6 (capab=0x411 status=0 aid=2)
[ 25.560462] wlan0: associated
[ 25.563255] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.110258] hub 2-0:1.0: hub_suspend
[ 26.110270] usb usb2: bus auto-suspend
[ 26.110275] usb usb2: bus suspend fail, err -2
[ 26.110279] hub 2-0:1.0: hub_resume
[ 26.110292] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 26.110297] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110309] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 26.110313] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110323] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 26.110327] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110336] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 26.110341] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 26.110359] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 29.107009] hub 2-0:1.0: hub_suspend
[ 29.107020] usb usb2: bus auto-suspend
[ 29.107024] usb usb2: bus suspend fail, err -2
[ 29.107027] hub 2-0:1.0: hub_resume
[ 29.107038] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 29.107041] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107052] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 29.107055] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107062] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 29.107065] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107071] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 29.107074] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 29.107086] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 31.775811] compiz.real[2499]: segfault at 3fe2000 ip 00007fddc97d4823 sp 00007fff7644b268 error 4 in libc-2.10.1.so[7fddc9752000+166000]
[ 32.103794] hub 2-0:1.0: hub_suspend
[ 32.103803] usb usb2: bus auto-suspend
[ 32.103806] usb usb2: bus suspend fail, err -2
[ 32.103808] hub 2-0:1.0: hub_resume
[ 32.103818] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 32.103821] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103829] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 32.103831] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103836] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 32.103838] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103845] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 32.103847] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 32.103855] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 35.101965] hub 2-0:1.0: hub_suspend
[ 35.101979] usb usb2: bus auto-suspend
[ 35.101984] usb usb2: bus suspend fail, err -2
[ 35.101988] hub 2-0:1.0: hub_resume
[ 35.102001] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 35.102006] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102018] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 35.102022] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102032] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 35.102036] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102045] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 35.102050] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 35.102063] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 36.071295] wlan0: no IPv6 routers present
[ 38.102004] hub 2-0:1.0: hub_suspend
[ 38.102012] usb usb2: bus auto-suspend
[ 38.102014] usb usb2: bus suspend fail, err -2
[ 38.102016] hub 2-0:1.0: hub_resume
[ 38.102025] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 38.102027] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102033] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 38.102035] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102040] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 38.102042] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102046] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 38.102048] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 38.102058] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 41.099907] hub 2-0:1.0: hub_suspend
[ 41.099920] usb usb2: bus auto-suspend
[ 41.099925] usb usb2: bus suspend fail, err -2
[ 41.099929] hub 2-0:1.0: hub_resume
[ 41.099943] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 41.099947] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099960] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 41.099964] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099974] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 41.099978] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.099987] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 41.099992] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 41.100010] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 44.098610] hub 2-0:1.0: hub_suspend
[ 44.098624] usb usb2: bus auto-suspend
[ 44.098629] usb usb2: bus suspend fail, err -2
[ 44.098633] hub 2-0:1.0: hub_resume
[ 44.098646] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 44.098651] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098663] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 44.098668] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098677] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 44.098681] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098691] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 44.098695] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 44.098710] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 47.094913] hub 2-0:1.0: hub_suspend
[ 47.094926] usb usb2: bus auto-suspend
[ 47.094931] usb usb2: bus suspend fail, err -2
[ 47.094935] hub 2-0:1.0: hub_resume
[ 47.094948] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 47.094952] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094964] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 47.094969] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094978] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 47.094983] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.094992] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 47.094996] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 47.095010] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 50.093251] hub 2-0:1.0: hub_suspend
[ 50.093264] usb usb2: bus auto-suspend
[ 50.093270] usb usb2: bus suspend fail, err -2
[ 50.093274] hub 2-0:1.0: hub_resume
[ 50.093287] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 50.093292] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093304] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 50.093308] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093318] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 50.093322] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093332] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 50.093336] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 50.093351] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 53.091507] hub 2-0:1.0: hub_suspend
[ 53.091520] usb usb2: bus auto-suspend
[ 53.091525] usb usb2: bus suspend fail, err -2
[ 53.091529] hub 2-0:1.0: hub_resume
[ 53.091542] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 53.091547] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091559] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 53.091563] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091573] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 53.091577] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091586] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 53.091591] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 53.091609] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 56.089773] hub 2-0:1.0: hub_suspend
[ 56.089787] usb usb2: bus auto-suspend
[ 56.089792] usb usb2: bus suspend fail, err -2
[ 56.089796] hub 2-0:1.0: hub_resume
[ 56.089809] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 56.089814] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089826] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 56.089830] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089840] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 56.089844] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089854] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 56.089858] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 56.089873] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 59.088045] hub 2-0:1.0: hub_suspend
[ 59.088058] usb usb2: bus auto-suspend
[ 59.088063] usb usb2: bus suspend fail, err -2
[ 59.088067] hub 2-0:1.0: hub_resume
[ 59.088079] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 59.088084] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088096] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 59.088101] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088110] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 59.088115] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088124] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 59.088128] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 59.088146] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 62.086212] hub 2-0:1.0: hub_suspend
[ 62.086225] usb usb2: bus auto-suspend
[ 62.086230] usb usb2: bus suspend fail, err -2
[ 62.086235] hub 2-0:1.0: hub_resume
[ 62.086248] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 62.086252] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086264] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 62.086269] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086278] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 62.086283] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086292] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 62.086296] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 62.086310] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 65.084487] hub 2-0:1.0: hub_suspend
[ 65.084500] usb usb2: bus auto-suspend
[ 65.084505] usb usb2: bus suspend fail, err -2
[ 65.084509] hub 2-0:1.0: hub_resume
[ 65.084522] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 65.084527] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084539] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 65.084543] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084553] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 65.084557] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084566] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 65.084571] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 65.084583] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 67.203292] xhci_hcd 0000:02:00.0: Poll event ring: 4294944003
[ 67.203302] xhci_hcd 0000:02:00.0: op reg status = 0x0
[ 67.203309] xhci_hcd 0000:02:00.0: ir_set 0 pending = 0x2
[ 67.203313] xhci_hcd 0000:02:00.0: No-op commands handled = 0
[ 67.203318] xhci_hcd 0000:02:00.0: HC error bitmask = 0x0
[ 67.203322] xhci_hcd 0000:02:00.0: Event ring:
[ 67.203328] xhci_hcd 0000:02:00.0: @37805400 00000000 00000000 00000000 00000000
[ 67.203333] xhci_hcd 0000:02:00.0: @37805410 00000000 00000000 00000000 00000000
[ 67.203338] xhci_hcd 0000:02:00.0: @37805420 00000000 00000000 00000000 00000000
[ 67.203343] xhci_hcd 0000:02:00.0: @37805430 00000000 00000000 00000000 00000000
[ 67.203348] xhci_hcd 0000:02:00.0: @37805440 00000000 00000000 00000000 00000000
[ 67.203353] xhci_hcd 0000:02:00.0: @37805450 00000000 00000000 00000000 00000000
[ 67.203358] xhci_hcd 0000:02:00.0: @37805460 00000000 00000000 00000000 00000000
[ 67.203363] xhci_hcd 0000:02:00.0: @37805470 00000000 00000000 00000000 00000000
[ 67.203368] xhci_hcd 0000:02:00.0: @37805480 00000000 00000000 00000000 00000000
[ 67.203373] xhci_hcd 0000:02:00.0: @37805490 00000000 00000000 00000000 00000000
[ 67.203378] xhci_hcd 0000:02:00.0: @378054a0 00000000 00000000 00000000 00000000
[ 67.203383] xhci_hcd 0000:02:00.0: @378054b0 00000000 00000000 00000000 00000000
[ 67.203388] xhci_hcd 0000:02:00.0: @378054c0 00000000 00000000 00000000 00000000
[ 67.203393] xhci_hcd 0000:02:00.0: @378054d0 00000000 00000000 00000000 00000000
[ 67.203398] xhci_hcd 0000:02:00.0: @378054e0 00000000 00000000 00000000 00000000
[ 67.203403] xhci_hcd 0000:02:00.0: @378054f0 00000000 00000000 00000000 00000000
[ 67.203408] xhci_hcd 0000:02:00.0: @37805500 00000000 00000000 00000000 00000000
[ 67.203413] xhci_hcd 0000:02:00.0: @37805510 00000000 00000000 00000000 00000000
[ 67.203418] xhci_hcd 0000:02:00.0: @37805520 00000000 00000000 00000000 00000000
[ 67.203423] xhci_hcd 0000:02:00.0: @37805530 00000000 00000000 00000000 00000000
[ 67.203428] xhci_hcd 0000:02:00.0: @37805540 00000000 00000000 00000000 00000000
[ 67.203433] xhci_hcd 0000:02:00.0: @37805550 00000000 00000000 00000000 00000000
[ 67.203438] xhci_hcd 0000:02:00.0: @37805560 00000000 00000000 00000000 00000000
[ 67.203443] xhci_hcd 0000:02:00.0: @37805570 00000000 00000000 00000000 00000000
[ 67.203448] xhci_hcd 0000:02:00.0: @37805580 00000000 00000000 00000000 00000000
[ 67.203453] xhci_hcd 0000:02:00.0: @37805590 00000000 00000000 00000000 00000000
[ 67.203458] xhci_hcd 0000:02:00.0: @378055a0 00000000 00000000 00000000 00000000
[ 67.203463] xhci_hcd 0000:02:00.0: @378055b0 00000000 00000000 00000000 00000000
[ 67.203468] xhci_hcd 0000:02:00.0: @378055c0 00000000 00000000 00000000 00000000
[ 67.203473] xhci_hcd 0000:02:00.0: @378055d0 00000000 00000000 00000000 00000000
[ 67.203478] xhci_hcd 0000:02:00.0: @378055e0 00000000 00000000 00000000 00000000
[ 67.203483] xhci_hcd 0000:02:00.0: @378055f0 00000000 00000000 00000000 00000000
[ 67.203488] xhci_hcd 0000:02:00.0: @37805600 00000000 00000000 00000000 00000000
[ 67.203493] xhci_hcd 0000:02:00.0: @37805610 00000000 00000000 00000000 00000000
[ 67.203498] xhci_hcd 0000:02:00.0: @37805620 00000000 00000000 00000000 00000000
[ 67.203503] xhci_hcd 0000:02:00.0: @37805630 00000000 00000000 00000000 00000000
[ 67.203508] xhci_hcd 0000:02:00.0: @37805640 00000000 00000000 00000000 00000000
[ 67.203513] xhci_hcd 0000:02:00.0: @37805650 00000000 00000000 00000000 00000000
[ 67.203518] xhci_hcd 0000:02:00.0: @37805660 00000000 00000000 00000000 00000000
[ 67.203523] xhci_hcd 0000:02:00.0: @37805670 00000000 00000000 00000000 00000000
[ 67.203528] xhci_hcd 0000:02:00.0: @37805680 00000000 00000000 00000000 00000000
[ 67.203533] xhci_hcd 0000:02:00.0: @37805690 00000000 00000000 00000000 00000000
[ 67.203538] xhci_hcd 0000:02:00.0: @378056a0 00000000 00000000 00000000 00000000
[ 67.203543] xhci_hcd 0000:02:00.0: @378056b0 00000000 00000000 00000000 00000000
[ 67.203548] xhci_hcd 0000:02:00.0: @378056c0 00000000 00000000 00000000 00000000
[ 67.203553] xhci_hcd 0000:02:00.0: @378056d0 00000000 00000000 00000000 00000000
[ 67.203558] xhci_hcd 0000:02:00.0: @378056e0 00000000 00000000 00000000 00000000
[ 67.203563] xhci_hcd 0000:02:00.0: @378056f0 00000000 00000000 00000000 00000000
[ 67.203568] xhci_hcd 0000:02:00.0: @37805700 00000000 00000000 00000000 00000000
[ 67.203573] xhci_hcd 0000:02:00.0: @37805710 00000000 00000000 00000000 00000000
[ 67.203578] xhci_hcd 0000:02:00.0: @37805720 00000000 00000000 00000000 00000000
[ 67.203583] xhci_hcd 0000:02:00.0: @37805730 00000000 00000000 00000000 00000000
[ 67.203588] xhci_hcd 0000:02:00.0: @37805740 00000000 00000000 00000000 00000000
[ 67.203593] xhci_hcd 0000:02:00.0: @37805750 00000000 00000000 00000000 00000000
[ 67.203598] xhci_hcd 0000:02:00.0: @37805760 00000000 00000000 00000000 00000000
[ 67.203603] xhci_hcd 0000:02:00.0: @37805770 00000000 00000000 00000000 00000000
[ 67.203608] xhci_hcd 0000:02:00.0: @37805780 00000000 00000000 00000000 00000000
[ 67.203613] xhci_hcd 0000:02:00.0: @37805790 00000000 00000000 00000000 00000000
[ 67.203618] xhci_hcd 0000:02:00.0: @378057a0 00000000 00000000 00000000 00000000
[ 67.203622] xhci_hcd 0000:02:00.0: @378057b0 00000000 00000000 00000000 00000000
[ 67.203627] xhci_hcd 0000:02:00.0: @378057c0 00000000 00000000 00000000 00000000
[ 67.203632] xhci_hcd 0000:02:00.0: @378057d0 00000000 00000000 00000000 00000000
[ 67.203637] xhci_hcd 0000:02:00.0: @378057e0 00000000 00000000 00000000 00000000
[ 67.203642] xhci_hcd 0000:02:00.0: @378057f0 00000000 00000000 00000000 00000000
[ 67.203649] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805400 (virt), 0x37805400 (dma)
[ 67.203653] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 67.203658] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805400 (virt), 0x37805400 (dma)
[ 67.203663] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 67.203672] xhci_hcd 0000:02:00.0: ERST deq = 64'h37805400
[ 67.203676] xhci_hcd 0000:02:00.0: Command ring:
[ 67.203681] xhci_hcd 0000:02:00.0: @37805000 00000000 00000000 00000000 00000000
[ 67.203686] xhci_hcd 0000:02:00.0: @37805010 00000000 00000000 00000000 00000000
[ 67.203691] xhci_hcd 0000:02:00.0: @37805020 00000000 00000000 00000000 00000000
[ 67.203695] xhci_hcd 0000:02:00.0: @37805030 00000000 00000000 00000000 00000000
[ 67.203700] xhci_hcd 0000:02:00.0: @37805040 00000000 00000000 00000000 00000000
[ 67.203705] xhci_hcd 0000:02:00.0: @37805050 00000000 00000000 00000000 00000000
[ 67.203710] xhci_hcd 0000:02:00.0: @37805060 00000000 00000000 00000000 00000000
[ 67.203715] xhci_hcd 0000:02:00.0: @37805070 00000000 00000000 00000000 00000000
[ 67.203720] xhci_hcd 0000:02:00.0: @37805080 00000000 00000000 00000000 00000000
[ 67.203725] xhci_hcd 0000:02:00.0: @37805090 00000000 00000000 00000000 00000000
[ 67.203729] xhci_hcd 0000:02:00.0: @378050a0 00000000 00000000 00000000 00000000
[ 67.203734] xhci_hcd 0000:02:00.0: @378050b0 00000000 00000000 00000000 00000000
[ 67.203739] xhci_hcd 0000:02:00.0: @378050c0 00000000 00000000 00000000 00000000
[ 67.203744] xhci_hcd 0000:02:00.0: @378050d0 00000000 00000000 00000000 00000000
[ 67.203749] xhci_hcd 0000:02:00.0: @378050e0 00000000 00000000 00000000 00000000
[ 67.203754] xhci_hcd 0000:02:00.0: @378050f0 00000000 00000000 00000000 00000000
[ 67.203759] xhci_hcd 0000:02:00.0: @37805100 00000000 00000000 00000000 00000000
[ 67.203763] xhci_hcd 0000:02:00.0: @37805110 00000000 00000000 00000000 00000000
[ 67.203768] xhci_hcd 0000:02:00.0: @37805120 00000000 00000000 00000000 00000000
[ 67.203773] xhci_hcd 0000:02:00.0: @37805130 00000000 00000000 00000000 00000000
[ 67.203778] xhci_hcd 0000:02:00.0: @37805140 00000000 00000000 00000000 00000000
[ 67.203783] xhci_hcd 0000:02:00.0: @37805150 00000000 00000000 00000000 00000000
[ 67.203788] xhci_hcd 0000:02:00.0: @37805160 00000000 00000000 00000000 00000000
[ 67.203793] xhci_hcd 0000:02:00.0: @37805170 00000000 00000000 00000000 00000000
[ 67.203797] xhci_hcd 0000:02:00.0: @37805180 00000000 00000000 00000000 00000000
[ 67.203802] xhci_hcd 0000:02:00.0: @37805190 00000000 00000000 00000000 00000000
[ 67.203807] xhci_hcd 0000:02:00.0: @378051a0 00000000 00000000 00000000 00000000
[ 67.203812] xhci_hcd 0000:02:00.0: @378051b0 00000000 00000000 00000000 00000000
[ 67.203817] xhci_hcd 0000:02:00.0: @378051c0 00000000 00000000 00000000 00000000
[ 67.203822] xhci_hcd 0000:02:00.0: @378051d0 00000000 00000000 00000000 00000000
[ 67.203827] xhci_hcd 0000:02:00.0: @378051e0 00000000 00000000 00000000 00000000
[ 67.203831] xhci_hcd 0000:02:00.0: @378051f0 00000000 00000000 00000000 00000000
[ 67.203836] xhci_hcd 0000:02:00.0: @37805200 00000000 00000000 00000000 00000000
[ 67.203841] xhci_hcd 0000:02:00.0: @37805210 00000000 00000000 00000000 00000000
[ 67.203846] xhci_hcd 0000:02:00.0: @37805220 00000000 00000000 00000000 00000000
[ 67.203851] xhci_hcd 0000:02:00.0: @37805230 00000000 00000000 00000000 00000000
[ 67.203856] xhci_hcd 0000:02:00.0: @37805240 00000000 00000000 00000000 00000000
[ 67.203861] xhci_hcd 0000:02:00.0: @37805250 00000000 00000000 00000000 00000000
[ 67.203865] xhci_hcd 0000:02:00.0: @37805260 00000000 00000000 00000000 00000000
[ 67.203870] xhci_hcd 0000:02:00.0: @37805270 00000000 00000000 00000000 00000000
[ 67.203875] xhci_hcd 0000:02:00.0: @37805280 00000000 00000000 00000000 00000000
[ 67.203880] xhci_hcd 0000:02:00.0: @37805290 00000000 00000000 00000000 00000000
[ 67.203885] xhci_hcd 0000:02:00.0: @378052a0 00000000 00000000 00000000 00000000
[ 67.203890] xhci_hcd 0000:02:00.0: @378052b0 00000000 00000000 00000000 00000000
[ 67.203895] xhci_hcd 0000:02:00.0: @378052c0 00000000 00000000 00000000 00000000
[ 67.203899] xhci_hcd 0000:02:00.0: @378052d0 00000000 00000000 00000000 00000000
[ 67.203904] xhci_hcd 0000:02:00.0: @378052e0 00000000 00000000 00000000 00000000
[ 67.203909] xhci_hcd 0000:02:00.0: @378052f0 00000000 00000000 00000000 00000000
[ 67.203914] xhci_hcd 0000:02:00.0: @37805300 00000000 00000000 00000000 00000000
[ 67.203919] xhci_hcd 0000:02:00.0: @37805310 00000000 00000000 00000000 00000000
[ 67.203924] xhci_hcd 0000:02:00.0: @37805320 00000000 00000000 00000000 00000000
[ 67.203929] xhci_hcd 0000:02:00.0: @37805330 00000000 00000000 00000000 00000000
[ 67.203933] xhci_hcd 0000:02:00.0: @37805340 00000000 00000000 00000000 00000000
[ 67.203938] xhci_hcd 0000:02:00.0: @37805350 00000000 00000000 00000000 00000000
[ 67.203943] xhci_hcd 0000:02:00.0: @37805360 00000000 00000000 00000000 00000000
[ 67.203948] xhci_hcd 0000:02:00.0: @37805370 00000000 00000000 00000000 00000000
[ 67.203953] xhci_hcd 0000:02:00.0: @37805380 00000000 00000000 00000000 00000000
[ 67.203958] xhci_hcd 0000:02:00.0: @37805390 00000000 00000000 00000000 00000000
[ 67.203963] xhci_hcd 0000:02:00.0: @378053a0 00000000 00000000 00000000 00000000
[ 67.203967] xhci_hcd 0000:02:00.0: @378053b0 00000000 00000000 00000000 00000000
[ 67.203972] xhci_hcd 0000:02:00.0: @378053c0 00000000 00000000 00000000 00000000
[ 67.203977] xhci_hcd 0000:02:00.0: @378053d0 00000000 00000000 00000000 00000000
[ 67.203982] xhci_hcd 0000:02:00.0: @378053e0 00000000 00000000 00000000 00000000
[ 67.203987] xhci_hcd 0000:02:00.0: @378053f0 37805000 00000000 00000000 00001802
[ 67.203992] xhci_hcd 0000:02:00.0: Ring deq = ffff880037805000 (virt), 0x37805000 (dma)
[ 67.203996] xhci_hcd 0000:02:00.0: Ring deq updated 0 times
[ 67.204001] xhci_hcd 0000:02:00.0: Ring enq = ffff880037805000 (virt), 0x37805000 (dma)
[ 67.204005] xhci_hcd 0000:02:00.0: Ring enq updated 0 times
[ 67.204014] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr low bits + flags = @00000000
[ 67.204019] xhci_hcd 0000:02:00.0: // xHC command ring deq ptr high bits = @00000000
[ 68.082822] hub 2-0:1.0: hub_suspend
[ 68.082834] usb usb2: bus auto-suspend
[ 68.082839] usb usb2: bus suspend fail, err -2
[ 68.082843] hub 2-0:1.0: hub_resume
[ 68.082856] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 68.082860] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082873] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 68.082877] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082886] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 68.082891] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082900] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 68.082904] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 68.082923] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 71.081070] hub 2-0:1.0: hub_suspend
[ 71.081081] usb usb2: bus auto-suspend
[ 71.081086] usb usb2: bus suspend fail, err -2
[ 71.081090] hub 2-0:1.0: hub_resume
[ 71.081102] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 71.081106] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081119] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 71.081123] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081133] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 71.081137] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081146] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 71.081151] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 71.081165] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 74.079347] hub 2-0:1.0: hub_suspend
[ 74.079358] usb usb2: bus auto-suspend
[ 74.079363] usb usb2: bus suspend fail, err -2
[ 74.079367] hub 2-0:1.0: hub_resume
[ 74.079379] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 74.079384] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079396] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 74.079400] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079410] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 74.079414] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079423] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 74.079428] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 74.079445] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 77.077541] hub 2-0:1.0: hub_suspend
[ 77.077554] usb usb2: bus auto-suspend
[ 77.077559] usb usb2: bus suspend fail, err -2
[ 77.077563] hub 2-0:1.0: hub_resume
[ 77.077576] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 77.077581] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077593] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 77.077598] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077607] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 77.077611] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077621] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 77.077625] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 77.077639] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 77.845810] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
[ 77.845814] PM: Marking nosave pages: 000000000009b000 - 0000000000100000
[ 77.845819] PM: Marking nosave pages: 00000000bf682000 - 00000000bf6bf000
[ 77.845823] PM: Marking nosave pages: 00000000bf75c000 - 00000000bf7bf000
[ 77.845828] PM: Marking nosave pages: 00000000bf7e4000 - 00000000bf7ff000
[ 77.845831] PM: Marking nosave pages: 00000000bf800000 - 0000000100000000
[ 77.846859] PM: Basic memory bitmaps created
[ 77.846865] PM: Syncing filesystems ... done.
[ 77.997120] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 77.998042] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 77.998269] PM: Preallocating image memory... done (allocated 1936029 pages)
[ 80.480913] PM: Allocated 7744116 kbytes in 2.48 seconds (3122.62 MB/s)
[ 80.480918] Suspending console(s) (use no_console_suspend to debug)
[ 80.707848] hub 2-0:1.0: hub_suspend
[ 80.707853] usb usb2: bus suspend
[ 80.707855] usb usb2: bus suspend fail, err -2
[ 80.707856] hub 2-0:1.0: hub_resume
[ 80.707864] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 80.707866] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707871] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 80.707872] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707877] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 80.707879] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707882] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 80.707884] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 80.707889] pm_op(): usb_dev_freeze+0x0/0x10 returns -2
[ 80.707891] PM: Device usb2 failed to freeze: error -2
[ 81.030959] Registered led device: iwl-phy0::radio
[ 81.030989] Registered led device: iwl-phy0::assoc
[ 81.031016] Registered led device: iwl-phy0::RX
[ 81.031041] Registered led device: iwl-phy0::TX
[ 81.166877] Restarting tasks ...
[ 81.166974] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 81.169743] done.
[ 81.169816] PM: Basic memory bitmaps freed
[ 84.075313] hub 2-0:1.0: hub_suspend
[ 84.075406] usb usb2: bus auto-suspend
[ 84.075412] usb usb2: bus suspend fail, err -2
[ 84.075416] hub 2-0:1.0: hub_resume
[ 84.075429] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 84.075434] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075446] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 84.075450] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075460] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 84.075464] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075474] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 84.075478] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 84.075503] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 87.071724] hub 2-0:1.0: hub_suspend
[ 87.071737] usb usb2: bus auto-suspend
[ 87.071742] usb usb2: bus suspend fail, err -2
[ 87.071746] hub 2-0:1.0: hub_resume
[ 87.071760] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 87.071764] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071777] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 87.071781] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071791] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 87.071795] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071804] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 87.071809] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 87.071823] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 90.070005] hub 2-0:1.0: hub_suspend
[ 90.070018] usb usb2: bus auto-suspend
[ 90.070023] usb usb2: bus suspend fail, err -2
[ 90.070027] hub 2-0:1.0: hub_resume
[ 90.070040] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 90.070045] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070058] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 90.070062] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070072] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 90.070076] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070085] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 90.070090] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 90.070104] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 93.068319] hub 2-0:1.0: hub_suspend
[ 93.068333] usb usb2: bus auto-suspend
[ 93.068340] usb usb2: bus suspend fail, err -2
[ 93.068345] hub 2-0:1.0: hub_resume
[ 93.068360] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 93.068366] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068382] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 93.068388] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068402] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 93.068407] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068416] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 93.068421] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 93.068435] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 96.066532] hub 2-0:1.0: hub_suspend
[ 96.066546] usb usb2: bus auto-suspend
[ 96.066551] usb usb2: bus suspend fail, err -2
[ 96.066555] hub 2-0:1.0: hub_resume
[ 96.066568] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 96.066573] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066586] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 96.066590] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066599] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 96.066604] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066613] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 96.066618] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 96.066632] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 99.064747] hub 2-0:1.0: hub_suspend
[ 99.064760] usb usb2: bus auto-suspend
[ 99.064766] usb usb2: bus suspend fail, err -2
[ 99.064770] hub 2-0:1.0: hub_resume
[ 99.064783] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 99.064787] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064800] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 99.064804] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064814] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 99.064818] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064828] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 99.064832] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 99.064842] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 102.063026] hub 2-0:1.0: hub_suspend
[ 102.063039] usb usb2: bus auto-suspend
[ 102.063045] usb usb2: bus suspend fail, err -2
[ 102.063049] hub 2-0:1.0: hub_resume
[ 102.063061] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 102.063066] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063079] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 102.063083] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063093] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 102.063097] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063106] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 102.063111] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 102.063125] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 105.061291] hub 2-0:1.0: hub_suspend
[ 105.061304] usb usb2: bus auto-suspend
[ 105.061309] usb usb2: bus suspend fail, err -2
[ 105.061313] hub 2-0:1.0: hub_resume
[ 105.061326] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 105.061331] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061343] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 105.061348] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061357] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 105.061362] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061371] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 105.061375] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 105.061394] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 108.059583] hub 2-0:1.0: hub_suspend
[ 108.059596] usb usb2: bus auto-suspend
[ 108.059601] usb usb2: bus suspend fail, err -2
[ 108.059605] hub 2-0:1.0: hub_resume
[ 108.059619] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 108.059623] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059636] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 108.059640] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059650] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 108.059654] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059664] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 108.059668] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 108.059688] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 111.063393] hub 2-0:1.0: hub_suspend
[ 111.063406] usb usb2: bus auto-suspend
[ 111.063411] usb usb2: bus suspend fail, err -2
[ 111.063415] hub 2-0:1.0: hub_resume
[ 111.063428] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 111.063433] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063446] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 111.063450] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063460] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 111.063464] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063474] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 111.063478] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 111.063491] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 114.056721] hub 2-0:1.0: hub_suspend
[ 114.056734] usb usb2: bus auto-suspend
[ 114.056739] usb usb2: bus suspend fail, err -2
[ 114.056743] hub 2-0:1.0: hub_resume
[ 114.056756] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 114.056761] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056773] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 114.056777] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056787] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 114.056791] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056801] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 114.056805] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 114.056817] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 117.054315] hub 2-0:1.0: hub_suspend
[ 117.054328] usb usb2: bus auto-suspend
[ 117.054333] usb usb2: bus suspend fail, err -2
[ 117.054337] hub 2-0:1.0: hub_resume
[ 117.054350] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 117.054355] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054368] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 117.054372] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054382] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 117.054386] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054395] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 117.054400] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 117.054417] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 120.052674] hub 2-0:1.0: hub_suspend
[ 120.052687] usb usb2: bus auto-suspend
[ 120.052692] usb usb2: bus suspend fail, err -2
[ 120.052696] hub 2-0:1.0: hub_resume
[ 120.052710] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 120.052714] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052727] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 120.052731] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052741] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 120.052745] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052754] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 120.052759] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 120.052772] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 123.050916] hub 2-0:1.0: hub_suspend
[ 123.050927] usb usb2: bus auto-suspend
[ 123.050932] usb usb2: bus suspend fail, err -2
[ 123.050936] hub 2-0:1.0: hub_resume
[ 123.050948] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 123.050953] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050965] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 123.050969] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050979] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 123.050983] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.050992] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 123.050997] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 123.051011] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 126.049101] hub 2-0:1.0: hub_suspend
[ 126.049112] usb usb2: bus auto-suspend
[ 126.049116] usb usb2: bus suspend fail, err -2
[ 126.049120] hub 2-0:1.0: hub_resume
[ 126.049132] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 126.049137] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049149] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 126.049153] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049163] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 126.049167] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049176] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2a0
[ 126.049181] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 126.049195] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:49 ` Ákos Maróy
@ 2010-02-25 22:57 ` Rafael J. Wysocki
2010-02-27 8:24 ` Ákos Maróy
2010-02-25 23:32 ` Alan Stern
1 sibling, 1 reply; 15+ messages in thread
From: Rafael J. Wysocki @ 2010-02-25 22:57 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Thursday 25 February 2010, Ákos Maróy wrote:
> Rafael,
>
> > Please try
> >
> > # echo core > /sys/power/pm_test
> > # echo disk > /sys/power/state
> >
> > That should return to the command prompt after ~5 sec.
>
> thanks. indeed, it does return, this is what I get in /var/log/messages:
>
> Feb 25 23:46:24 tonkachi kernel: [ 77.846865] PM: Syncing filesystems
> ... done.
> Feb 25 23:46:24 tonkachi kernel: [ 77.997120] Freezing user space
> processes ... (elapsed 0.00 seconds) done.
> Feb 25 23:46:24 tonkachi kernel: [ 77.998042] Freezing remaining
> freezable tasks ... (elapsed 0.00 seconds) done.
> Feb 25 23:46:24 tonkachi kernel: [ 77.998269] PM: Preallocating image
> memory... done (allocated 1936029 pages)
> Feb 25 23:46:24 tonkachi kernel: [ 80.480913] PM: Allocated 7744116
> kbytes in 2.48 seconds (3122.62 MB/s)
> Feb 25 23:46:24 tonkachi kernel: [ 80.480918] Suspending console(s)
> (use no_console_suspend to debug)
> Feb 25 23:46:24 tonkachi kernel: [ 81.030959] Registered led device:
> iwl-phy0::radio
> Feb 25 23:46:24 tonkachi kernel: [ 81.030989] Registered led device:
> iwl-phy0::assoc
> Feb 25 23:46:24 tonkachi kernel: [ 81.031016] Registered led device:
> iwl-phy0::RX
> Feb 25 23:46:24 tonkachi kernel: [ 81.031041] Registered led device:
> iwl-phy0::TX
> Feb 25 23:46:24 tonkachi kernel: [ 81.166877] Restarting tasks ...
> Feb 25 23:46:24 tonkachi kernel: [ 81.169743] done.
>
>
> my dmesg is much more talkative - please find it attached.
Hmm. Then perhaps you need this patch:
http://patchwork.kernel.org/patch/81830/
Rafael
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:49 ` Ákos Maróy
2010-02-25 22:57 ` Rafael J. Wysocki
@ 2010-02-25 23:32 ` Alan Stern
2010-02-26 8:03 ` Ákos Maróy
1 sibling, 1 reply; 15+ messages in thread
From: Alan Stern @ 2010-02-25 23:32 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Thu, 25 Feb 2010, Ákos Maróy wrote:
> my dmesg is much more talkative - please find it attached.
Remember, both suspend and hibernate are certain to fail unless you
rmmod xhci-hcd first.
Alan Stern
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 23:32 ` Alan Stern
@ 2010-02-26 8:03 ` Ákos Maróy
0 siblings, 0 replies; 15+ messages in thread
From: Ákos Maróy @ 2010-02-26 8:03 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-pm
Alan,
> Remember, both suspend and hibernate are certain to fail unless you
> rmmod xhci-hcd first.
I already added into my /etc/pm/config.d/00sleep_module the following:
SUSPEND_MODULES="xhci"
this works fine when issuing pm-suspend - does this not affect
pm-hibernate? is there a similar setting that is taken into account on
hibernation?
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-25 22:57 ` Rafael J. Wysocki
@ 2010-02-27 8:24 ` Ákos Maróy
2010-02-27 12:00 ` Rafael J. Wysocki
0 siblings, 1 reply; 15+ messages in thread
From: Ákos Maróy @ 2010-02-27 8:24 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm
Rafael,
> Hmm. Then perhaps you need this patch:
> http://patchwork.kernel.org/patch/81830/
having applied this patch, hibernate behaves the same :(
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 8:24 ` Ákos Maróy
@ 2010-02-27 12:00 ` Rafael J. Wysocki
2010-02-27 13:28 ` Ákos Maróy
0 siblings, 1 reply; 15+ messages in thread
From: Rafael J. Wysocki @ 2010-02-27 12:00 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Saturday 27 February 2010, Ákos Maróy wrote:
> Rafael,
>
> > Hmm. Then perhaps you need this patch:
> > http://patchwork.kernel.org/patch/81830/
>
> having applied this patch, hibernate behaves the same :(
Does it also happen if you rmmod the xhci-hcd module manually and run
"echo disk > /sys/power/state" afterwards?
Rafael
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 12:00 ` Rafael J. Wysocki
@ 2010-02-27 13:28 ` Ákos Maróy
2010-02-27 13:51 ` Matthias-Christian Ott
0 siblings, 1 reply; 15+ messages in thread
From: Ákos Maróy @ 2010-02-27 13:28 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm
Rafael,
> Does it also happen if you rmmod the xhci-hcd module manually and run
> "echo disk > /sys/power/state" afterwards?
yes. I do an rmmod xhci, lsmod | grep xhci returns nothing, and then
echo disk > /sys/power/state will give me the same result as
pm-hibernate. that is, I get to an empty screen, there's a cursor
blinking on the top left. after a while, the screen dims, but nothing
else happens. only a power cycle saves the day, where the machine boots
normally, when just turned on.
how could I debug these happenings further?
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 13:28 ` Ákos Maróy
@ 2010-02-27 13:51 ` Matthias-Christian Ott
2010-02-27 14:13 ` Ákos Maróy
0 siblings, 1 reply; 15+ messages in thread
From: Matthias-Christian Ott @ 2010-02-27 13:51 UTC (permalink / raw)
To: linux-pm
On Sat, Feb 27, 2010 at 02:28:44PM +0100, Ákos Maróy wrote:
> Rafael,
>
> > Does it also happen if you rmmod the xhci-hcd module manually and run
> > "echo disk > /sys/power/state" afterwards?
>
> yes. I do an rmmod xhci, lsmod | grep xhci returns nothing, and then
> echo disk > /sys/power/state will give me the same result as
> pm-hibernate. that is, I get to an empty screen, there's a cursor
> blinking on the top left. after a while, the screen dims, but nothing
> else happens. only a power cycle saves the day, where the machine boots
> normally, when just turned on.
>
> how could I debug these happenings further?
Did you try it without framebuffer and X.org? It seems to me that the
system wakes up correctly, but the graphics card is this issue. I had
this with my old laptop too.
Regards,
Matthias-Christian
_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 13:51 ` Matthias-Christian Ott
@ 2010-02-27 14:13 ` Ákos Maróy
2010-02-27 14:57 ` Matthias-Christian Ott
2010-02-27 18:08 ` Rafael J. Wysocki
0 siblings, 2 replies; 15+ messages in thread
From: Ákos Maróy @ 2010-02-27 14:13 UTC (permalink / raw)
To: Matthias-Christian Ott; +Cc: linux-pm
Matthias,
> Did you try it without framebuffer and X.org? It seems to me that the
> system wakes up correctly, but the graphics card is this issue. I had
> this with my old laptop too.
instead of guessword, I'd be very happy to look at a log of what's
happening. a long time ago I remember, with tuxonice, this was possible,
just to immitate hibernation.
OTOH, suspend actually works - I wonder if there's an inherent different
in the process, other than the machine state being saved to disk or not..
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 14:13 ` Ákos Maróy
@ 2010-02-27 14:57 ` Matthias-Christian Ott
2010-02-27 18:08 ` Rafael J. Wysocki
1 sibling, 0 replies; 15+ messages in thread
From: Matthias-Christian Ott @ 2010-02-27 14:57 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Sat, Feb 27, 2010 at 03:13:35PM +0100, Ákos Maróy wrote:
> Matthias,
>
> > Did you try it without framebuffer and X.org? It seems to me that the
> > system wakes up correctly, but the graphics card is this issue. I had
> > this with my old laptop too.
>
> instead of guessword, I'd be very happy to look at a log of what's
> happening. a long time ago I remember, with tuxonice, this was possible,
> just to immitate hibernation.
If you have a second machine, you could set all relevant kernel
debugging options and read the output via serial console.
Regards,
Matthias-Christian
_______________________________________________
linux-pm mailing list
linux-pm@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 14:13 ` Ákos Maróy
2010-02-27 14:57 ` Matthias-Christian Ott
@ 2010-02-27 18:08 ` Rafael J. Wysocki
2010-03-01 7:46 ` Ákos Maróy
1 sibling, 1 reply; 15+ messages in thread
From: Rafael J. Wysocki @ 2010-02-27 18:08 UTC (permalink / raw)
To: linux-pm
On Saturday 27 February 2010, Ákos Maróy wrote:
> Matthias,
>
> > Did you try it without framebuffer and X.org? It seems to me that the
> > system wakes up correctly, but the graphics card is this issue. I had
> > this with my old laptop too.
>
> instead of guessword, I'd be very happy to look at a log of what's
> happening. a long time ago I remember, with tuxonice, this was possible,
> just to immitate hibernation.
You can actually do that with the in-kernel hibernate too.
Please read Documentation/power/basic-pm-debugging.txt, there are more
hibernate debugging hints in there.
Rafael
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-02-27 18:08 ` Rafael J. Wysocki
@ 2010-03-01 7:46 ` Ákos Maróy
2010-03-01 20:48 ` Rafael J. Wysocki
0 siblings, 1 reply; 15+ messages in thread
From: Ákos Maróy @ 2010-03-01 7:46 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-pm
Rafael,
> You can actually do that with the in-kernel hibernate too.
>
> Please read Documentation/power/basic-pm-debugging.txt, there are more
> hibernate debugging hints in there.
thanks for the tip. I tried the various levels of hibernation, and the
freezer mode works, while the devices mode fails the same as the
'normal' hibernation.
as the only point forward in the documentation is to do a binary search
on the kernel modules by unloading them before the test, I'll have to
find the time to do this. this is also quite complicated because of how
modules depend on each other.
Akos
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: pm-suspend working, but pm-hibernate fails
2010-03-01 7:46 ` Ákos Maróy
@ 2010-03-01 20:48 ` Rafael J. Wysocki
0 siblings, 0 replies; 15+ messages in thread
From: Rafael J. Wysocki @ 2010-03-01 20:48 UTC (permalink / raw)
To: Ákos Maróy; +Cc: linux-pm
On Monday 01 March 2010, Ákos Maróy wrote:
> Rafael,
>
> > You can actually do that with the in-kernel hibernate too.
> >
> > Please read Documentation/power/basic-pm-debugging.txt, there are more
> > hibernate debugging hints in there.
>
> thanks for the tip. I tried the various levels of hibernation, and the
> freezer mode works, while the devices mode fails the same as the
> 'normal' hibernation.
>
> as the only point forward in the documentation is to do a binary search
> on the kernel modules by unloading them before the test, I'll have to
> find the time to do this. this is also quite complicated because of how
> modules depend on each other.
Well, you can try to boot the kernel with no_console_suspend and
initcall_debug in the command line, echo 8 to /proc/sys/kernel/printk and
repeat the failing "devices" test.
With a bit of luck, you'll be able to see which driver is failing from the
kernel messages printed to the console.
Rafael
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2010-03-01 20:48 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-25 22:27 pm-suspend working, but pm-hibernate fails Ákos Maróy
2010-02-25 22:37 ` Rafael J. Wysocki
2010-02-25 22:49 ` Ákos Maróy
2010-02-25 22:57 ` Rafael J. Wysocki
2010-02-27 8:24 ` Ákos Maróy
2010-02-27 12:00 ` Rafael J. Wysocki
2010-02-27 13:28 ` Ákos Maróy
2010-02-27 13:51 ` Matthias-Christian Ott
2010-02-27 14:13 ` Ákos Maróy
2010-02-27 14:57 ` Matthias-Christian Ott
2010-02-27 18:08 ` Rafael J. Wysocki
2010-03-01 7:46 ` Ákos Maróy
2010-03-01 20:48 ` Rafael J. Wysocki
2010-02-25 23:32 ` Alan Stern
2010-02-26 8:03 ` Ákos Maróy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.