From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Hurenkamp Subject: Re: radeon in dom0/ivtv in domU: irq 16 nobody cared Date: Fri, 9 Apr 2010 01:47:35 +0200 Message-ID: <201004090147.35140.mark.hurenkamp@xs4all.nl> References: <20100408001916.GA10840@phenom.dumpdata.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20100408001916.GA10840@phenom.dumpdata.com> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: Konrad Rzeszutek Wilk Cc: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org Hi, > > With a fairly recent (~march 29th) xen/next kernel and a recent > > xen-4.0.rc9-pre build, i still get occasional 'nobody cared' messages o= n a > > IRQ which is shared between dom0 radeon driver, and domU ivtv driver.=20 Meanwhile i moved to an even more recent xen/stable-2.6.32 (.11) kernel, and a xen-4.0.0 release, the problem still shows. > > Is there something i can do about this? >=20 > Yes, >=20 > Please e-mail your full serial log output, your cat /proc/interrupts, > and 'lspci -vvv' output. This is to say, for both Dom0 and DomU. I've attached the requested information, although it was collected after a = fresh boot (thus the problem has not occurred yet), with the same xen & kernel as were= in use=20 when the problem last exposed itself.=20 Note that during boot, there are a lot of warnings about slowpath and sched= ule_bug, most of these occur when starting xen-domains. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D Serial log output: __ __ _ _ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ \ // _ \ '_ \ | || |_| | | | | | | / \ __/ | | | |__ _| |_| | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.0.0 (root@karpeer.net) (gcc version 4.4.1 (Ubuntu 4.4.1= =2D4ubuntu9) ) Wed Apr 7 23:16:01 CEST 2010 (XEN) Latest ChangeSet: Wed Apr 07 12:38:28 2010 +0100 21091:f28f1ee587c8 (XEN) Command line: console_to_ring com1=3D115200,8n1 console=3Dcom1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f670000 (usable) (XEN) 000000007f670000 - 000000007f688000 (ACPI data) (XEN) 000000007f688000 - 000000007f6dc000 (ACPI NVS) (XEN) 000000007f6dc000 - 000000007f700000 (reserved) (XEN) 000000007f800000 - 0000000080000000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000280000000 (usable) (XEN) ACPI: RSDP 000FB470, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7F670100, 0064 (r1 022210 XSDT2250 20100222 MSFT 97) (XEN) ACPI: FACP 7F670290, 00F4 (r3 022210 FACP2250 20100222 MSFT 97) (XEN) ACPI: DSDT 7F6704A0, EF5B (r1 A1290 A1290001 1 INTL 20060113) (XEN) ACPI: FACS 7F688000, 0040 (XEN) ACPI: APIC 7F670390, 00CC (r1 022210 APIC2250 20100222 MSFT 97) (XEN) ACPI: MCFG 7F670460, 003C (r1 022210 OEMMCFG 20100222 MSFT 97) (XEN) ACPI: OEMB 7F688040, 0072 (r1 022210 OEMB2250 20100222 MSFT 97) (XEN) ACPI: HPET 7F67F7A0, 0038 (r1 022210 OEMHPET 20100222 MSFT 97) (XEN) ACPI: DMAR 7F6880C0, 0090 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: ASPT 7F67FA40, 0034 (r6 022210 PerfTune 20100222 MSFT 97) (XEN) ACPI: OSFR 7F67FA80, 00B0 (r1 022210 OEMOSFR 20100222 MSFT 97) (XEN) System RAM: 7975MB (8166736kB) (XEN) Domain heap initialised (XEN) Processor #0 7:14 APIC version 21 (XEN) Processor #2 7:14 APIC version 21 (XEN) Processor #4 7:14 APIC version 21 (XEN) Processor #6 7:14 APIC version 21 (XEN) Processor #1 7:14 APIC version 21 (XEN) Processor #3 7:14 APIC version 21 (XEN) Processor #5 7:14 APIC version 21 (XEN) Processor #7 7:14 APIC version 21 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3660.593 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET =FF(XEN) Allocated console ring of 16 KiB. (XEN) Brought up 8 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x25ec000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000260000000->0000000270000000 (1967534 pages to = be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff825ec000 (XEN) Init. ramdisk: ffffffff825ec000->ffffffff8dcea600 (XEN) Phys-Mach map: ffffffff8dceb000->ffffffff8ec6dd70 (XEN) Start info: ffffffff8ec6e000->ffffffff8ec6e4b4 (XEN) Page tables: ffffffff8ec6f000->ffffffff8ecea000 (XEN) Boot stack: ffffffff8ecea000->ffffffff8eceb000 (XEN) TOTAL: ffffffff80000000->ffffffff8f000000 (XEN) ENTRY ADDRESS: ffffffff8198a200 (XEN) Dom0 has maximum 8 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input t= o Xen) (XEN) Freed 160kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.11mh18 (root@coruscant) (gcc version 4.4.1 (Ubuntu 4.4= =2E1-4ubuntu9) ) #10 SMP PREEMPT Wed Apr 7 23:57:39 CEST 2010 Command line: nopat dom0_mem=3D2048M root=3D/dev/mapper/mirror-svr11_mythtv= console=3Dtty0 console=3Dhvc0 earlyprintk=3Dxen xen- pciback.permissive xen-pciback.hide=3D(00:1a.0)(05:00.0)(08:02.0)(09:08.0)(= 09:09.0) KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn 7f700-7f800: 256 pages freed xen_release_chunk: looking at area pfn 80000-fec00: 519168 pages freed xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed xen_release_chunk: looking at area pfn fee01-ffe00: 4095 pages freed released 524030 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 000000007f670000 (usable) Xen: 000000007f670000 - 000000007f688000 (ACPI data) Xen: 000000007f688000 - 000000007f6dc000 (ACPI NVS) Xen: 000000007f6dc000 - 000000007f700000 (reserved) Xen: 000000007f800000 - 0000000080000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffe00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 00000001f05ae000 (usable) PAT support disabled. bootconsole [xenboot0] enabled DMI 2.6 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn =3D 0x1f05ae max_arch_pfn =3D 0x400000000 last_pfn =3D 0x7f670 max_arch_pfn =3D 0x400000000 init_memory_mapping: 0000000000000000-000000007f670000 init_memory_mapping: 0000000100000000-00000001f05ae000 RAMDISK: 025ec000 - 0dcea600 ACPI: RSDP 00000000000fb470 00024 (v02 ACPIAM) ACPI: XSDT 000000007f670100 00064 (v01 022210 XSDT2250 20100222 MSFT 000000= 97) ACPI: FACP 000000007f670290 000F4 (v03 022210 FACP2250 20100222 MSFT 000000= 97) ACPI: DSDT 000000007f6704a0 0EF5B (v01 A1290 A1290001 00000001 INTL 200601= 13) ACPI: FACS 000000007f688000 00040 ACPI: APIC 000000007f670390 000CC (v01 022210 APIC2250 20100222 MSFT 000000= 97) ACPI: MCFG 000000007f670460 0003C (v01 022210 OEMMCFG 20100222 MSFT 000000= 97) ACPI: OEMB 000000007f688040 00072 (v01 022210 OEMB2250 20100222 MSFT 000000= 97) ACPI: HPET 000000007f67f7a0 00038 (v01 022210 OEMHPET 20100222 MSFT 000000= 97) ACPI: 000000007f6880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 000000= 97) ACPI: ASPT 000000007f67fa40 00034 (v06 022210 PerfTune 20100222 MSFT 000000= 97) ACPI: OSFR 000000007f67fa80 000B0 (v01 022210 OEMOSFR 20100222 MSFT 000000= 97) No NUMA configuration found =46aking a node at 0000000000000000-00000001f05ae000 Bootmem setup node 0 0000000000000000-00000001f05ae000 NODE_DATA [0000000000010000 - 0000000000023fff] bootmap [0000000000024000 - 00000000000620b7] pages 3f (9 early reservations) =3D=3D> bootmem [0000000000 - 01f05ae000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [0000000000 - 00000= 01000] #1 [000ec6f000 - 000ecea000] XEN PAGETABLES =3D=3D> [000ec6f000 - 000ec= ea000] #2 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [0000006000 - 00000= 08000] #3 [0001000000 - 00025cb6e0] TEXT DATA BSS =3D=3D> [0001000000 - 00025= cb6e0] #4 [00025ec000 - 000dcea600] RAMDISK =3D=3D> [00025ec000 - 000dc= ea600] #5 [000dceb000 - 000ec6f000] XEN START INFO =3D=3D> [000dceb000 - 000ec= 6f000] #6 [00025cc000 - 00025cc2c0] BRK =3D=3D> [00025cc000 - 00025= cc2c0] #7 [0000100000 - 0000481000] PGTABLE =3D=3D> [0000100000 - 00004= 81000] #8 [000ecea000 - 000f471000] PGTABLE =3D=3D> [000ecea000 - 000f4= 71000] found SMP MP-table at [ffff8800000ff780] ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001f05ae Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f670 0: 0x00100000 -> 0x001f05ae ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 000000007f670000 - 000000007f688000 PM: Registered nosave memory: 000000007f688000 - 000000007f6dc000 PM: Registered nosave memory: 000000007f6dc000 - 000000007f700000 PM: Registered nosave memory: 000000007f700000 - 000000007f800000 PM: Registered nosave memory: 000000007f800000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on Xen Xen version: 4.0.0 (preserve-AD) (dom0) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff880031d11000 s1926296 r8192 d23400 u195= 7888 pcpu-alloc: s1926296 r8192 d23400 u1957888 alloc=3D478*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1453700 Policy zone: Normal Kernel command line: root=3D/dev/mapper/mirror-svr11_mythtv ro nopat dom0_m= em=3D2048M root=3D/dev/mapper/mirror-svr11_mythtv=20 console=3Dtty0 console=3Dhvc0 earlyprintk=3Dxen xen-pciback.permissive xen-= pciback.hide=3D(00:1a.0)(05:00.0)(08:02.0)(09:08.0)(09:09.0) PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff8800240000= 00 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=3Dffff880020000000 size=3D67108864 xen_swiotlb_fixup: buf=3Dffff880024060000 size=3D32768 Memory: 5548708k/8132280k available (4633k kernel code, 2107396k absent, 47= 6176k reserved, 3244k data, 3240k init) SLUB: Genslabs=3D14, HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D8, N= odes=3D1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:2304 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=3D9 global_irq=3D9 trigger=3Dc polarity=3D1 xen_allocate_pirq: returning irq 9 for gsi 9 xen: acpi sci 9 Console: colour VGA+ 80x25 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32.11mh18 (root@coruscant) (gcc version 4.4.1 (Ubuntu 4.4= =2E1-4ubuntu9) ) #10 SMP PREEMPT Wed Apr 7 23:57:39 CEST 2010 Command line: nopat dom0_mem=3D2048M root=3D/dev/mapper/mirror-svr11_mythtv= console=3Dtty0 console=3Dhvc0 earlyprintk=3Dxen xen- pciback.permissive xen-pciback.hide=3D(00:1a.0)(05:00.0)(08:02.0)(09:08.0)(= 09:09.0) KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls xen_release_chunk: looking at area pfn 7f700-7f800: 256 pages freed xen_release_chunk: looking at area pfn 80000-fec00: 519168 pages freed xen_release_chunk: looking at area pfn fec01-fee00: 511 pages freed xen_release_chunk: looking at area pfn fee01-ffe00: 4095 pages freed released 524030 pages of unused memory BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009fc00 (usable) Xen: 000000000009fc00 - 0000000000100000 (reserved) Xen: 0000000000100000 - 000000007f670000 (usable) Xen: 000000007f670000 - 000000007f688000 (ACPI data) Xen: 000000007f688000 - 000000007f6dc000 (ACPI NVS) Xen: 000000007f6dc000 - 000000007f700000 (reserved) Xen: 000000007f800000 - 0000000080000000 (reserved) Xen: 00000000fec00000 - 00000000fec01000 (reserved) Xen: 00000000fee00000 - 00000000fee01000 (reserved) Xen: 00000000ffe00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 00000001f05ae000 (usable) PAT support disabled. bootconsole [xenboot0] enabled DMI 2.6 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn =3D 0x1f05ae max_arch_pfn =3D 0x400000000 last_pfn =3D 0x7f670 max_arch_pfn =3D 0x400000000 init_memory_mapping: 0000000000000000-000000007f670000 init_memory_mapping: 0000000100000000-00000001f05ae000 RAMDISK: 025ec000 - 0dcea600 ACPI: RSDP 00000000000fb470 00024 (v02 ACPIAM) ACPI: XSDT 000000007f670100 00064 (v01 022210 XSDT2250 20100222 MSFT 000000= 97) ACPI: FACP 000000007f670290 000F4 (v03 022210 FACP2250 20100222 MSFT 000000= 97) ACPI: DSDT 000000007f6704a0 0EF5B (v01 A1290 A1290001 00000001 INTL 200601= 13) ACPI: FACS 000000007f688000 00040 ACPI: APIC 000000007f670390 000CC (v01 022210 APIC2250 20100222 MSFT 000000= 97) ACPI: MCFG 000000007f670460 0003C (v01 022210 OEMMCFG 20100222 MSFT 000000= 97) ACPI: OEMB 000000007f688040 00072 (v01 022210 OEMB2250 20100222 MSFT 000000= 97) ACPI: HPET 000000007f67f7a0 00038 (v01 022210 OEMHPET 20100222 MSFT 000000= 97) ACPI: 000000007f6880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 000000= 97) ACPI: ASPT 000000007f67fa40 00034 (v06 022210 PerfTune 20100222 MSFT 000000= 97) ACPI: OSFR 000000007f67fa80 000B0 (v01 022210 OEMOSFR 20100222 MSFT 000000= 97) No NUMA configuration found =46aking a node at 0000000000000000-00000001f05ae000 Bootmem setup node 0 0000000000000000-00000001f05ae000 NODE_DATA [0000000000010000 - 0000000000023fff] bootmap [0000000000024000 - 00000000000620b7] pages 3f (9 early reservations) =3D=3D> bootmem [0000000000 - 01f05ae000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [0000000000 - 00000= 01000] #1 [000ec6f000 - 000ecea000] XEN PAGETABLES =3D=3D> [000ec6f000 - 000ec= ea000] #2 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [0000006000 - 00000= 08000] #3 [0001000000 - 00025cb6e0] TEXT DATA BSS =3D=3D> [0001000000 - 00025= cb6e0] #4 [00025ec000 - 000dcea600] RAMDISK =3D=3D> [00025ec000 - 000dc= ea600] #5 [000dceb000 - 000ec6f000] XEN START INFO =3D=3D> [000dceb000 - 000ec= 6f000] #6 [00025cc000 - 00025cc2c0] BRK =3D=3D> [00025cc000 - 00025= cc2c0] #7 [0000100000 - 0000481000] PGTABLE =3D=3D> [0000100000 - 00004= 81000] #8 [000ecea000 - 000f471000] PGTABLE =3D=3D> [000ecea000 - 000f4= 71000] found SMP MP-table at [ffff8800000ff780] ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001f05ae Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f670 0: 0x00100000 -> 0x001f05ae ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 000000007f670000 - 000000007f688000 PM: Registered nosave memory: 000000007f688000 - 000000007f6dc000 PM: Registered nosave memory: 000000007f6dc000 - 000000007f700000 PM: Registered nosave memory: 000000007f700000 - 000000007f800000 PM: Registered nosave memory: 000000007f800000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on Xen Xen version: 4.0.0 (preserve-AD) (dom0) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff880031d11000 s1926296 r8192 d23400 u195= 7888 pcpu-alloc: s1926296 r8192 d23400 u1957888 alloc=3D478*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1453700 Policy zone: Normal Kernel command line: root=3D/dev/mapper/mirror-svr11_mythtv ro nopat dom0_m= em=3D2048M root=3D/dev/mapper/mirror-svr11_mythtv=20 console=3Dtty0 console=3Dhvc0 earlyprintk=3Dxen xen-pciback.permissive xen-= pciback.hide=3D(00:1a.0)(05:00.0)(08:02.0)(09:08.0)(09:09.0) PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff8800240000= 00 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=3Dffff880020000000 size=3D67108864 xen_swiotlb_fixup: buf=3Dffff880024060000 size=3D32768 Memory: 5548708k/8132280k available (4633k kernel code, 2107396k absent, 47= 6176k reserved, 3244k data, 3240k init) SLUB: Genslabs=3D14, HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D8, N= odes=3D1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:2304 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) xen: sci override: source_irq=3D9 global_irq=3D9 trigger=3Dc polarity=3D1 xen_allocate_pirq: returning irq 9 for gsi 9 xen: acpi sci 9 Console: colour VGA+ 80x25 console [tty0] enabled console [hvc0] enabled, bootconsole disabled console [hvc0] enabled, bootconsole disabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar =2E.. MAX_LOCKDEP_SUBCLASSES: 8 =2E.. MAX_LOCK_DEPTH: 48 =2E.. MAX_LOCKDEP_KEYS: 8191 =2E.. CLASSHASH_SIZE: 4096 =2E.. MAX_LOCKDEP_ENTRIES: 16384 =2E.. MAX_LOCKDEP_CHAINS: 32768 =2E.. CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 61603840 bytes of page_cgroup please try 'cgroup_disable=3Dmemory' option if you don't want memory cgroups installing Xen timer for CPU 0 Detected 3660.592 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. = 7321.18 BogoMIPS (lpj=3D3660592) Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 0/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Performance Events: unsupported p6 CPU model 30 no PMU driver, software eve= nts only. lockdep: fixing up alternatives. SMP alternatives: switching to UP code ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 24022 entries in 95 pages cpu 0 spinlock event irq 2302 installing Xen timer for CPU 1 cpu 1 spinlock event irq 2296 lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 2 cpu 2 spinlock event irq 2290 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 2/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 3 cpu 3 spinlock event irq 2284 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 3/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 4 cpu 4 spinlock event irq 2278 Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 5 cpu 5 spinlock event irq 2272 Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 5/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 6 cpu 6 spinlock event irq 2266 Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 6/0x0 -> Node 0 CPU: Unsupported number of siblings 16 installing Xen timer for CPU 7 cpu 7 spinlock event irq 2260 Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 16 Brought up 8 CPUs Grant table initialized regulator: core version 0.5 Time: 22:55:28 Date: 04/08/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ERROR: Unable to locate IOAPIC for GSI 9 ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE =3D 0x18, I/O: command/status =3D 0x66, data =3D 0x62 ACPI Warning: Incorrect checksum in table [OEMB] - 66, should be 65 (200909= 03/tbutils-314) ACPI Warning: Incorrect checksum in table [ ] - 3B, should be 7F (200909= 03/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold pci 0000:00:1c.6: PME# disabled pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold pci 0000:00:1c.7: PME# disabled pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it= with 'pcie_aspm=3Dforce' pci 0000:04:00.0: PME# supported from D3hot pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it= with 'pcie_aspm=3Dforce' pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:08:04.0: PME# supported from D1 D2 D3hot D3cold pci 0000:08:04.0: PME# disabled pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:01:00.0,decodes=3Dio+mem,owns=3Dio+mem,locks= =3Dnone vgaarb: device added: PCI:0000:02:00.0,decodes=3Dio+mem,owns=3Dnone,locks= =3Dnone vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size =3D 128 NetLabel: protocols =3D UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen kstop/0 used greatest stack depth: 6248 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 8 for gsi 8 xen_allocate_pirq: returning irq 13 for gsi 13 xen_allocate_pirq: returning irq 4 for gsi 4 Already setup the GSI :4 pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:06: ioport range 0x290-0x29f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x500-0x57f has been reserved system 00:07: ioport range 0x600-0x607 has been reserved system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xc0000-0xcffff could not be reserved system 00:0e: iomem range 0xe0000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0x7fefffff could not be reserved system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved pciback 0000:00:1a.0: seizing device pciback 0000:05:00.0: seizing device pciback 0000:08:02.0: seizing device pciback 0000:09:08.0: seizing device pciback 0000:09:09.0: seizing device PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:08:04.0: BAR 6: address space collision on of device [0xfbec0000-0= xfbedffff] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0xa000-0xafff pci 0000:00:03.0: MEM window: 0xfb800000-0xfb8fffff pci 0000:00:03.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 pci 0000:00:05.0: IO window: 0xb000-0xbfff pci 0000:00:05.0: MEM window: 0xfb900000-0xfb9fffff pci 0000:00:05.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.4: IO window: 0x2000-0x2fff pci 0000:00:1c.4: MEM window: 0x80400000-0x805fffff pci 0000:00:1c.4: PREFETCH window: 0x00000080600000-0x000000807fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: 0x3000-0x3fff pci 0000:00:1c.5: MEM window: 0xfbc00000-0xfbdfffff pci 0000:00:1c.5: PREFETCH window: 0x00000080800000-0x000000809fffff pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.6: IO window: 0xd000-0xdfff pci 0000:00:1c.6: MEM window: 0xfbb00000-0xfbbfffff pci 0000:00:1c.6: PREFETCH window: 0x00000080a00000-0x00000080bfffff pci 0000:00:1c.7: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.7: IO window: 0xc000-0xcfff pci 0000:00:1c.7: MEM window: 0xfba00000-0xfbafffff pci 0000:00:1c.7: PREFETCH window: 0x000000d3f00000-0x000000d3ffffff pci 0000:08:01.0: PCI bridge, secondary bus 0000:09 pci 0000:08:01.0: IO window: disabled pci 0000:08:01.0: MEM window: disabled pci 0000:08:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff pci 0000:00:1e.0: PREFETCH window: 0x000000d4000000-0x000000dfffffff pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: enabling device (0104 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: enabling device (0104 -> 0107) xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: enabling device (0106 -> 0107) xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... =46reeing initrd memory: 187385k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff8800240000= 00 DMA: software IO TLB at phys 0x20000000 - 0x24000000 audit: initializing netlink socket (disabled) type=3D2000 audit(1270767329.876:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 11203 cryptomgr_test used greatest stack depth: 5560 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/in= put0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Event-channel device installed. xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 pciback 0000:09:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pciback 0000:09:09.0: PCI INT A disabled xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pciback 0000:09:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pciback 0000:09:08.0: PCI INT A disabled xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 pciback 0000:08:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pciback 0000:08:02.0: PCI INT A disabled xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 pciback 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pciback 0000:05:00.0: PCI INT A disabled xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pciback 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pciback 0000:00:1a.0: PCI INT A disabled blktap_device_init: blktap device major 253 blktap_ring_init: blktap ring major: 252 registering netback hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 brd: module loaded loop: module loaded xen_allocate_pirq: returning irq 18 for gsi 18 Already setup the GSI :18 ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq led clo pmp pio scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m8192@0xfbbfa000 port 0xfbbfa100 irq 18 ata2: SATA max UDMA/133 abar m8192@0xfbbfa000 port 0xfbbfa180 irq 18 ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 21 ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 21 xen_allocate_pirq: returning irq 21 for gsi 21 Already setup the GSI :21 ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] scsi4 : ata_piix scsi5 : ata_piix ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21 ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21 =46ixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb7fd000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=3D1d6b, idProduct=3D0002 usb usb1: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.11mh18 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redha= t.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=3D1 kernel parameter, acct=3D1 nf_conntrack module option= or sysctl net.netfilter.nf_conntrack_acct=3D1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 6:812:956 rtc_cmos 00:03: setting system clock to 2010-04-08 22:55:29 UTC (1270767329) Initalizing network drop monitor service ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=3D8087, idProduct=3D0020 usb 1-1: New USB device strings: Mfr=3D0, Product=3D0, SerialNumber=3D0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports detected ata3.00: SATA link down (SStatus 0 SControl 300) ata3.01: SATA link down (SStatus 0 SControl 300) usb 1-1.2: new high speed USB device using ehci_hcd and address 3 ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.01: ATA-8: ST31500341AS, CC1J, max UDMA/133 ata4.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 usb 1-1.2: New USB device found, idVendor=3D0b95, idProduct=3D1720 usb 1-1.2: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D3 usb 1-1.2: Product: USB2.0 usb 1-1.2: Manufacturer: ASIX Elec. Corp. usb 1-1.2: configuration #1 chosen from 1 choice ata4.01: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 3:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda: scsi 3:0:1:0: Direct-Access ATA ST31500341AS CC1J PQ: 0 ANSI: 5 sd 3:0:1:0: Attached scsi generic sg1 type 0 sda1 sda2 sda3 sda4 < sd 3:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sda5 usb 1-1.3: new full speed USB device using ehci_hcd and address 4 sda6 sd 3:0:1:0: [sdb] Write Protect is off sda7 sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda8 sda9 sda10 sda11 sdb: sda12 usb 1-1.3: New USB device found, idVendor=3D0408, idProduct=3D3000 usb 1-1.3: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.3: Product: Optical Touch Screen usb 1-1.3: Manufacturer: Quanta Computer Inc. usb 1-1.3: configuration #1 chosen from 1 choice sdb1 sdb2 sdb3 sdb4 < sda13 sdb5 generic-usb 0003:0408:3000.0001: hiddev96,hidraw0: USB HID v1.10 Device [Qu= anta Computer Inc. Optical Touch Screen] on=20 usb-0000:00:1d.0-1.3/input0 sda14 sdb6 sda15 > sdb7 sdb8 sdb9 sdb10 sdb11 usb 1-1.4: new full speed USB device using ehci_hcd and address 5 sdb12 sdb13 sdb14 sd 3:0:0:0: [sda] Attached SCSI disk sdb15 > sd 3:0:1:0: [sdb] Attached SCSI disk =46reeing unused kernel memory: 3240k freed Write protecting the kernel read-only data: 6888k busybox used greatest stack depth: 5264 bytes left exe used greatest stack depth: 4984 bytes left Loading, please wait... framebuffer used greatest stack depth: 4976 bytes left exe used greatest stack depth: 4752 bytes left Couldn't get a file descriptor referring to the console usb 1-1.4: New USB device found, idVendor=3D0a12, idProduct=3D0001 usb 1-1.4: New USB device strings: Mfr=3D0, Product=3D2, SerialNumber=3D0 usb 1-1.4: Product: BT2.0 usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.5: new low speed USB device using ehci_hcd and address 6 xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 pata_jmicron 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 scsi6 : pata_jmicron scsi7 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth0: RTL8168d/8111d at 0xffffc90011b2e000, 00:26:18:a8:e1:bb, XID 083000c0= IRQ 2245 usb 1-1.5: New USB device found, idVendor=3D1241, idProduct=3D1503 usb 1-1.5: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.5: Product: USB Keyboard usb 1-1.5: Manufacturer: usb 1-1.5: configuration #1 chosen from 1 choice r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded xen_allocate_pirq: returning irq 19 for gsi 19 Already setup the GSI :19 r8169 0000:08:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 r8169 0000:08:04.0: no PCI Express capability eth1: RTL8169sc/8110sc at 0xffffc90011b32000, 00:26:18:a8:d4:c1, XID 180000= 00 IRQ 19 input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-= 1.5:1.0/input/input2 generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ U= SB Keyboard] on usb-0000:00:1d.0-1.5/input0 input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-= 1.5:1.1/input/input3 generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB= Keyboard] on usb-0000:00:1d.0-1.5/input1 blkid used greatest stack depth: 3792 bytes left ata7.00: ATAPI: PHILIPS DVDRW416N, 1.C0, max UDMA/33 ata7.00: configured for UDMA/33 scsi 6:0:0:0: CD-ROM PHILIPS DVDRW416N 1.C0 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi generic sg2 type 5 usb 1-1.6: new low speed USB device using ehci_hcd and address 7 usb 1-1.6: New USB device found, idVendor=3D046d, idProduct=3Dc00e usb 1-1.6: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.6: Product: USB-PS/2 Optical Mouse usb 1-1.6: Manufacturer: Logitech usb 1-1.6: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/= usb1/1-1/1-1.6/1-1.6:1.0/input/input4 generic-usb 0003:046D:C00E.0004: input,hidraw3: USB HID v1.10 Mouse [Logite= ch USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0 modprobe used greatest stack depth: 3776 bytes left usb 1-1.7: new low speed USB device using ehci_hcd and address 8 usb 1-1.7: New USB device found, idVendor=3D046d, idProduct=3Dc00e usb 1-1.7: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.7: Product: USB-PS/2 Optical Mouse usb 1-1.7: Manufacturer: Logitech usb 1-1.7: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/= usb1/1-1/1-1.7/1-1.7:1.0/input/input5 generic-usb 0003:046D:C00E.0005: input,hidraw4: USB HID v1.10 Mouse [Logite= ch USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0 usb 1-1.8: new low speed USB device using ehci_hcd and address 9 usb 1-1.8: New USB device found, idVendor=3D1241, idProduct=3D1503 usb 1-1.8: New USB device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 1-1.8: Product: USB Keyboard usb 1-1.8: Manufacturer: usb 1-1.8: configuration #1 chosen from 1 choice input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-= 1.8:1.0/input/input6 generic-usb 0003:1241:1503.0006: input,hidraw5: USB HID v1.10 Keyboard [ U= SB Keyboard] on usb-0000:00:1d.0-1.8/input0 md: bind md: bind input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-= 1.8:1.1/input/input7 generic-usb 0003:1241:1503.0007: input,hidraw6: USB HID v1.10 Device [ USB= Keyboard] on usb-0000:00:1d.0-1.8/input1 md: bind md: bind md: bind md: bind md: bind md: raid1 personality registered for level 1 raid1: md12 is not clean -- starting background reconstruction raid1: raid set md12 active with 2 out of 2 mirrors md12: detected capacity change from 0 to 128009895936 md: resync of RAID array md12 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/= sec) for resync. md: using 128k window, over a total of 125009664 blocks. md12: unknown partition table md: bind md: raid0 personality registered for level 0 raid0: looking at sdb13 raid0: comparing sdb13(500022912) with sdb13(500022912) raid0: END raid0: =3D=3D> UNIQUE raid0: 1 zones raid0: looking at sda13 raid0: comparing sda13(500022912) with sdb13(500022912) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 1000045824 sectors. ******* md13 configuration ********* zone0=3D[sda13/sdb13/] zone offset=3D0kb device offset=3D0kb size=3D500022912kb ********************************** md13: detected capacity change from 0 to 512023461888 md: bind md13: raid0: looking at sdb15 raid0: comparing sdb15(873421696) with sdb15(873421696) raid0: END raid0: =3D=3D> UNIQUE raid0: 1 zones raid0: looking at sda15 raid0: comparing sda15(873421696) with sdb15(873421696) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 1746843392 sectors. ******* md15 configuration ********* zone0=3D[sda15/sdb15/] zone offset=3D0kb device offset=3D0kb size=3D873421696kb ********************************** md15: detected capacity change from 0 to 894383816704 unknown partition table mdadm used greatest stack depth: 3232 bytes left md15: unknown partition table md: bind md: bind raid1: md10 is not clean -- starting background reconstruction raid1: raid set md10 active with 2 out of 2 mirrors md10: detected capacity change from 0 to 64009011200 md: delaying resync of md10 until md12 has finished (they share one or more= physical units) md10: unknown partition table raid1: raid set md11 active with 2 out of 2 mirrors md11: detected capacity change from 0 to 128009895936 md11: md: bind unknown partition table raid0: looking at sda14 raid0: comparing sda14(500022912) with sda14(500022912) raid0: END raid0: =3D=3D> UNIQUE raid0: 1 zones raid0: looking at sdb14 raid0: comparing sdb14(500022912) with sda14(500022912) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 1000045824 sectors. ******* md14 configuration ********* zone0=3D[sda14/sdb14/] zone offset=3D0kb device offset=3D0kb size=3D500022912kb ********************************** md14: detected capacity change from 0 to 512023461888 md14: unknown partition table Begin: Loading essential drivers... ... fuse init (API version 7.13) md: linear personality registered for level -1 md: multipath personality registered for level -4 async_tx: api initialized (async) xor: automatically using best checksumming function: generic_sse generic_sse: 4136.000 MB/sec xor: using function: generic_sse (4136.000 MB/sec) raid6: int64x1 3593 MB/s raid6: int64x2 3777 MB/s raid6: int64x4 3031 MB/s raid6: int64x8 2324 MB/s raid6: sse2x1 8277 MB/s raid6: sse2x2 9726 MB/s raid6: sse2x4 11601 MB/s raid6: using algorithm sse2x4 (11601 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 Done. Begin: Running /scripts/init-premount ... Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Running /scripts/local-premount ... PM: Starting manual resume from disk Done. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Begin: Starting AppArmor profiles ... Warning: unable to find a suitable fs in /proc/mounts, is it mounted? Use --subdomainfs to override. initramfs used greatest stack depth: 2976 bytes left =46ailure: AppArmor profiles failed to load Done. init: sreadahead main process (927) terminated with status 1 fsck from util-linux-ng 2.16 Adding 8388600k swap on /dev/mapper/mirror-svr11_swap. Priority:-1 extents= :1 across:8388600k /dev/mapper/mirror-svr11_mythtv: clean, 379845/2359296 files, 6676053/94371= 84 blocks (check in 5 mounts) fsck from util-linux-ng 2.16 /dev/mapper/mirror-home_hurenkam: recovering journal /dev/mapper/mirror-home_hurenkam: clean, 46961/983040 files, 3392548/393216= 0 blocks (check in 2 mounts) fsck from util-linux-ng 2.16 /dev/mapper/mirror-home_ibrahimc: recovering journal /dev/mapper/mirror-home_ibrahimc: clean, 47705/327680 files, 1119691/131072= 0 blocks * Setting preliminary keymap... = * Stopping NTP server ntpd * Setting up console font and keymap... = * Starting NTP server ntpd network daemon(s)... * could not access PID file for nmbd * could not access PID file for nmbd * could not access PID file for nmbd * Starting OpenBSD Secure Shell server sshd = * Stopping NTP server ntpd * Starting NTP server ntpd * Loading LIRC modules = * Stopping NTP server ntpd * Starting NTP server ntpd * Starting MySQL database server mysqld = ...done. * Checking for corrupt, not cleanly closed and upgrade needing tables. * Running DKMS auto installation service for kernel 2.6.32.11mh18 = * vboxdrv (3.1.6)... ...done. * vboxnetadp (3.1.6)... ...done. * vboxnetflt (3.1.6)... ...done. * Stopping NTP server ntpd * Restarting OpenBSD Secure Shell server sshd * could not access PID file for nmbd * Exporting directories for NFS kernel daemon... = * Restarting OpenBSD Secure Shell server sshd * could not access PID file for nmbd * Restarting OpenBSD Secure Shell server sshd * could not access PID file for nmbd * Starting NTP server ntpd * Stopping NTP server ntpd * Starting NTP server ntpd * Stopping NTP server ntpd * Starting internet superserver inetd = XENBUS: Unable to read cpu statedule stfix XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state XENBUS: Unable to read cpu state * Starting NTP server ntpd =2D-----------[ cut here ]------------ WARNING: at kernel/lockdep.c:2323 trace_hardirqs_on_caller+0xb7/0x135() Hardware name: System Product Name Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Not tainted 2.6.32.11mh18 #10 Call Trace: [] warn_slowpath_common+0x7c/0x94 [] ? _spin_unlock_irq+0x30/0x63 [] warn_slowpath_null+0x14/0x16 [] trace_hardirqs_on_caller+0xb7/0x135 [] trace_hardirqs_on+0xd/0xf [] _spin_unlock_irq+0x30/0x63 [] add_to_net_schedule_list_tail+0x76/0x7b [] netif_be_int+0x19/0xaa [] ? check_events+0x12/0x20 [] handle_IRQ_event+0x77/0x14f [] ? _raw_spin_unlock+0x8f/0x98 [] handle_level_irq+0x78/0xda [] xen_evtchn_do_upcall+0x123/0x1ec [] xen_do_hypervisor_callback+0x1e/0x30 [] ? hypercall_page+0x40a/0x100b [] ? hypercall_page+0x40a/0x100b [] ? notify_remote_via_evtchn+0x1e/0x44 [] ? xb_write+0x16e/0x18a [] ? xs_talkv+0x6a/0x174 [] ? kasprintf+0x38/0x3b [] ? xs_single+0x3a/0x3c [] ? xenbus_read+0x42/0x5b [] ? frontend_changed+0x64b/0x67b [] ? xenbus_otherend_changed+0xe9/0x176 [] ? check_events+0x12/0x20 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? frontend_changed+0x10/0x12 [] ? xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] ? kthread+0x7f/0x87 [] ? child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 =2D--[ end trace ccdbc01323694876 ]--- tap1.0: no IPv6 routers present vif1.1: no IPv6 routers present vif1.2: no IPv6 routers present tap1.1: no IPv6 routers present dmz: port 3(vif2.0) entering forwarding state vif2.0: no IPv6 routers present alloc irq_desc for 2229 on node 0 alloc kstat_irqs on node 0 device vif3.0 entered promiscuous mode loc: port 4(vif3.0) entering learning state physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] ? lock_acquired+0x255/0x264 [] xenbus_read_driver_state+0x2e/0x3e [] pciback_setup_backend+0x4e/0x2e6 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x13f/0x14e [] ? xenbus_gather+0xd3/0x11d [] pciback_be_watch+0x2c/0x30 [] pciback_xenbus_probe+0x1ae/0x1fa [] xenbus_dev_probe+0xb8/0x17c [] driver_probe_device+0xde/0x1fe [] __device_attach+0x3a/0x3f [] ? __device_attach+0x0/0x3f [] bus_for_each_drv+0x59/0x90 [] device_attach+0x66/0x7d [] bus_probe_device+0x27/0x3e [] device_add+0x3b4/0x55f [] ? __spin_lock_init+0x31/0x54 [] device_register+0x1e/0x22 [] xenbus_probe_node+0x129/0x1cf [] xenbus_dev_changed+0x15b/0x18b [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? _raw_spin_unlock+0x8f/0x98 [] backend_changed+0x3b/0x5b [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x79/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_scanf+0x22/0x75 [] pciback_setup_backend+0x9d/0x2e6 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kfree+0x13f/0x14e [] ? xenbus_gather+0xd3/0x11d [] pciback_be_watch+0x2c/0x30 [] pciback_xenbus_probe+0x1ae/0x1fa [] xenbus_dev_probe+0xb8/0x17c [] driver_probe_device+0xde/0x1fe [] __device_attach+0x3a/0x3f [] ? __device_attach+0x0/0x3f [] bus_for_each_drv+0x59/0x90 [] device_attach+0x66/0x7d [] bus_probe_device+0x27/0x3e [] device_add+0x3b4/0x55f [] ? __spin_lock_init+0x31/0x54 [] device_register+0x1e/0x22 [] xenbus_probe_node+0x129/0x1cf [] xenbus_dev_changed+0x15b/0x18b [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? _raw_spin_unlock+0x8f/0x98 [] backend_changed+0x3b/0x5b [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x79/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_scanf+0x22/0x75 [] ? snprintf+0x34/0x36 [] pciback_setup_backend+0x135/0x2e6 [] ? xenbus_gather+0xd3/0x11d [] pciback_be_watch+0x2c/0x30 [] pciback_xenbus_probe+0x1ae/0x1fa [] xenbus_dev_probe+0xb8/0x17c [] driver_probe_device+0xde/0x1fe [] __device_attach+0x3a/0x3f [] ? __device_attach+0x0/0x3f [] bus_for_each_drv+0x59/0x90 [] device_attach+0x66/0x7d [] bus_probe_device+0x27/0x3e [] device_add+0x3b4/0x55f [] ? __spin_lock_init+0x31/0x54 [] device_register+0x1e/0x22 [] xenbus_probe_node+0x129/0x1cf [] xenbus_dev_changed+0x15b/0x18b [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? _raw_spin_unlock+0x8f/0x98 [] backend_changed+0x3b/0x5b [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? xs_talkv+0x5c/0x174 [] ? xs_talkv+0x5c/0x174 [] __mutex_lock_common+0x2b5/0x489 [] ? xs_talkv+0x5c/0x174 [] mutex_lock_nested+0x39/0x3e [] xs_talkv+0x5c/0x174 [] xenbus_write+0x7a/0x9b [] xenbus_printf+0xb0/0xd3 [] ? snprintf+0x34/0x36 [] pciback_publish_pci_dev+0x8e/0xaf [] ? xen_force_evtchn_callback+0xd/0xf [] ? pciback_add_pci_dev+0x9a/0xca [] pciback_add_pci_dev+0xbb/0xca [] ? pciback_publish_pci_dev+0x0/0xaf [] pciback_export_device+0xa9/0x1a3 [] pciback_setup_backend+0x197/0x2e6 [] ? xenbus_gather+0xd3/0x11d [] pciback_be_watch+0x2c/0x30 [] pciback_xenbus_probe+0x1ae/0x1fa [] xenbus_dev_probe+0xb8/0x17c [] driver_probe_device+0xde/0x1fe [] __device_attach+0x3a/0x3f [] ? __device_attach+0x0/0x3f [] bus_for_each_drv+0x59/0x90 [] device_attach+0x66/0x7d [] bus_probe_device+0x27/0x3e [] device_add+0x3b4/0x55f [] ? __spin_lock_init+0x31/0x54 [] device_register+0x1e/0x22 [] xenbus_probe_node+0x129/0x1cf [] xenbus_dev_changed+0x15b/0x18b [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? _raw_spin_unlock+0x8f/0x98 [] backend_changed+0x3b/0x5b [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] xenbus_write+0x7a/0x9b [] xenbus_printf+0xb0/0xd3 [] ? snprintf+0x34/0x36 [] pciback_publish_pci_dev+0x8e/0xaf [] ? xen_force_evtchn_callback+0xd/0xf [] ? pciback_add_pci_dev+0x9a/0xca [] pciback_add_pci_dev+0xbb/0xca [] ? pciback_publish_pci_dev+0x0/0xaf [] pciback_export_device+0xa9/0x1a3 [] pciback_setup_backend+0x197/0x2e6 [] ? xenbus_gather+0xd3/0x11d [] pciback_be_watch+0x2c/0x30 [] pciback_xenbus_probe+0x1ae/0x1fa [] xenbus_dev_probe+0xb8/0x17c [] driver_probe_device+0xde/0x1fe [] __device_attach+0x3a/0x3f [] ? __device_attach+0x0/0x3f [] bus_for_each_drv+0x59/0x90 [] device_attach+0x66/0x7d [] bus_probe_device+0x27/0x3e [] device_add+0x3b4/0x55f [] ? __spin_lock_init+0x31/0x54 [] device_register+0x1e/0x22 [] xenbus_probe_node+0x129/0x1cf [] xenbus_dev_changed+0x15b/0x18b [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] ? _raw_spin_unlock+0x8f/0x98 [] backend_changed+0x3b/0x5b [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] xenbus_write+0x7a/0x9b [] xenbus_printf+0xb0/0xd3 [] ? snprintf+0x34/0x36 [] pciback_setup_backend+0x1fa/0xBUG: scheduling while a= tomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] ? lock_acquired+0x255/0x264 [] xenbus_read_driver_state+0x2e/0x3e [] pciback_attach+0x3a/0x363 [] ? xenbus_gather+0xd3/0x11d [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] xenbus_read_driver_state+0x2e/0x3e [] pciback_attach+0x50/0x363 [] ? xenbus_gather+0xd3/0x11d [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x79/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] pciback_attach+0xd8/0x363 [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] pciback_attach+0xd8/0x363 [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_gather+0x9f/0x11d [] pciback_attach+0xd8/0x363 [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 alloc irq_desc for 2227 on node 0 alloc kstat_irqs on node 0 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] ? kasprintf+0x38/0x3b [] xs_single+0x3a/0x3c [] xenbus_read+0x42/0x5b [] xenbus_scanf+0x22/0x75 [] ? pciback_handle_event+0x0/0x18 [] xenbus_switch_state+0x3f/0x9d [] pciback_attach+0x218/0x363 [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 BUG: scheduling while atomic: xenwatch/39/0x00000002 INFO: lockdep is turned off. Modules linked in: xt_physdev tun dummy snd_hda_codec_atihdmi snd_hda_codec= _via snd_hda_intel rfcomm snd_hda_codec nfsd snd_hwdep sco=20 exportfs snd_pcm_oss snd_mixer_oss autofs4 nfs bridge snd_pcm snd_seq_dummy= lockd stp snd_seq_oss snd_seq_midi llc fscache snd_rawmidi=20 bnep snd_seq_midi_event ipv6 nfs_acl snd_seq l2cap snd_timer 8250_pnp snd_s= eq_device auth_rpcgss asus_atk0110 asix 8250 snd btusb=20 soundcore shpchp usbnet serio_raw bluetooth hwmon serial_core snd_page_allo= c sunrpc raid10 raid456 async_raid6_recov async_pq raid6_pq=20 async_xor xor async_memcpy async_tx multipath linear fuse raid0 raid1 ata_g= eneric pata_acpi r8169 mii pata_jmicron Pid: 39, comm: xenwatch Tainted: G W 2.6.32.11mh18 #10 Call Trace: [] __schedule_bug+0x77/0x7c [] schedule+0xd5/0x87e [] ? xen_force_evtchn_callback+0xd/0xf [] ? check_events+0x12/0x20 [] ? prepare_to_wait+0x58/0x61 [] ? _spin_unlock_irqrestore+0x70/0x7e [] read_reply+0xa1/0x11e [] ? autoremove_wake_function+0x0/0x39 [] xs_talkv+0xb2/0x174 [] xenbus_write+0x7a/0x9b [] xenbus_printf+0xb0/0xd3 [] ? pciback_handle_event+0x0/0x18 [] xenbus_switch_state+0x61/0x9d [] pciback_attach+0x218/0x363 [] pciback_frontend_changed+0x68/0x138 [] xenbus_otherend_changed+0xe9/0x176 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? lock_release+0x1ac/0x1b9 [] frontend_changed+0x10/0x12 [] xenwatch_thread+0x111/0x14c [] ? autoremove_wake_function+0x0/0x39 [] ? xenwatch_thread+0x0/0x14c [] kthread+0x7f/0x87 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? check_events+0x12/0x20 [] ? check_events+0x12/0x20 [] ? child_rip+0x0/0x20 blkback: ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) alloc irq_desc for 2226 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) alloc irq_desc for 2225 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) alloc irq_desc for 2224 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 12, event-channel 19, protocol 1 (x86_64-abi) alloc irq_desc for 2223 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 13, event-channel 20, protocol 1 (x86_64-abi) alloc irq_desc for 2222 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 14, event-channel 21, protocol 1 (x86_64-abi) alloc irq_desc for 2221 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 15, event-channel 22, protocol 1 (x86_64-abi) alloc irq_desc for 2220 on node 0 alloc kstat_irqs on node 0 blkback: ring-ref 16, event-channel 23, protocol 1 (x86_64-abi) alloc irq_desc for 2219 on node 0 alloc kstat_irqs on node 0 loc: port 4(vif3.0) entering forwarding state alloc irq_desc for 2218 on node 0 alloc kstat_irqs on node 0 device vif4.0 entered promiscuous mode loc: port 5(vif4.0) entering learning state vif3.0: no IPv6 routers present physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. device tap4.0 entered promiscuous mode loc: port 6(tap4.0) entering learning state physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING c= hains for non-bridged traffic is not supported anymore. alloc irq_desc for 2217 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 2216 on node 0 alloc kstat_irqs on node 0 * [done] loc: port 5(vif4.0) entering forwarding state loc: port 6(tap4.0) entering forwarding state * Starting NTP server ntpd = tap4.0: no IPv6 routers presentce mdadm --monitor vif4.0: no IPv6 routers present * Starting Common Unix Printing System: cupsd = alloc irq_desc for 2215 on node 0 alloc kstat_irqs on node 0 * PulseAudio configured for per-user sessions * Starting web server apache2 = pciback 0000:09:08.0: enabling device (0000 -> 0002) xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=3D16 Already setup the GSI :16 pciback 0000:09:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU4 attaching NULL sched-domain. CPU5 attaching NULL sched-domain. CPU6 attaching NULL sched-domain. CPU7 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 1 2 3 (cpu_power =3D 1023) 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 1 2 3 (cpu_power =3D 1023) 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 1 2 3 (cpu_power =3D 1023) 4 5 6 ...done. pciback 0000:05:00.0: enabling device (0000 -> 0002) xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=3D17 Already setup the GSI :17 pciback 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pciback 0000:05:00.0: setting latency timer to 64 pciback 0000:09:09.0: enabling device (0000 -> 0002) xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=3D17 Already setup the GSI :17 pciback 0000:09:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pciback 0000:08:02.0: enabling device (0000 -> 0002) xen: registering gsi 17 triggering 0 polarity 1 xen_allocate_pirq: returning irq 17 for gsi 17 xen: --> irq=3D17 Already setup the GSI :17 pciback 0000:08:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:02:00.0: enabling device (0000 -> 0003) xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=3D16 Already setup the GSI :16 pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized drm 1.1.0 20060810 xen: registering gsi 16 triggering 0 polarity 1 xen_allocate_pirq: returning irq 16 for gsi 16 xen: --> irq=3D16 Already setup the GSI :16 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 pci 0000:02:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 1 mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combin= ing [drm] Setting GART location based on new memory map [drm] Loading RV710 CP Microcode platform r600_cp.0: firmware: requesting radeon/RV710_pfp.bin platform r600_cp.0: firmware: requesting radeon/RV710_me.bin [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combin= ing [drm] Setting GART location based on new memory map DMA-API: debugging out of memory - disabling [drm] Loading RV710 CP Microcode platform r600_cp.0: firmware: requesting radeon/RV710_pfp.bin platform r600_cp.0: firmware: requesting radeon/RV710_me.bin [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU4 attaching NULL sched-domain. CPU5 attaching NULL sched-domain. CPU6 attaching NULL sched-domain. CPU7 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-7 level CPU groups: 0 1 2 3 4 5 6 7 CPU1 attaching sched-domain: domain 0: span 0-7 level CPU groups: 1 2 3 4 5 6 7 0 CPU2 attaching sched-domain: domain 0: span 0-7 level CPU groups: 2 3 4 5 6 7 0 (cpu_power =3D 1023) 1 CPU3 attaching sched-domain: domain 0: span 0-7 level CPU groups: 3 4 5 6 7 0 (cpu_power =3D 1023) 1 2 CPU4 attaching sched-domain: domain 0: span 0-7 level CPU groups: 4 5 6 7 0 (cpu_power =3D 1023) 1 2 3 CPU5 attaching sched-domain: domain 0: span 0-7 level CPU groups: 5 6 7 0 (cpu_power =3D 1023) 1 2 3 4 CPU6 attaching sched-domain: domain 0: span 0-7 level CPU groups: 6 7 0 (cpu_power =3D 1023) 1 2 3 4 5 CPU7 attaching sched-domain: domain 0: span 0-7 level CPU groups: 7 0 (cpu_power =3D 1023) 1 2 3 4 5 6 hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger= bdl_pos_adj. hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger= bdl_pos_adj. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D On my domU: /proc/interrupts: CPU0 CPU1 =20 16: 0 0 xen-pirq-pcifront ivtv0 17: 89059 0 xen-pirq-pcifront cx23885[0], ivtv1, ivtv2 520: 14329 0 xen-dyn-event eth0 521: 91 0 xen-dyn-event blkif 522: 208 0 xen-dyn-event blkif 523: 74 0 xen-dyn-event blkif 524: 96 0 xen-dyn-event blkif 525: 153 0 xen-dyn-event blkif 526: 49 0 xen-dyn-event blkif 527: 34 0 xen-dyn-event blkif 528: 9709 0 xen-dyn-event blkif 529: 123 0 xen-dyn-event hvc_console 530: 100 0 xen-dyn-event pcifront 531: 1202 0 xen-dyn-event xenbus 532: 0 602 xen-dyn-ipi callfuncsingle1 533: 0 0 xen-dyn-virq debug1 534: 0 0 xen-dyn-ipi callfunc1 535: 0 8754 xen-dyn-ipi resched1 536: 0 16 xen-dyn-ipi spinlock1 537: 0 53244 xen-dyn-virq timer1 538: 392 0 xen-dyn-ipi callfuncsingle0 539: 0 0 xen-dyn-virq debug0 540: 0 0 xen-dyn-ipi callfunc0 541: 5129 0 xen-dyn-ipi resched0 542: 4 0 xen-dyn-ipi spinlock0 543: 59874 0 xen-dyn-virq timer0 NMI: 0 0 Non-maskable interrupts LOC: 0 0 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 0 0 Performance monitoring interrupts PND: 0 0 Performance pending work RES: 5129 8754 Rescheduling interrupts CAL: 392 602 Function call interrupts TLB: 0 0 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 0 0 Machine check polls ERR: 0 MIS: 0 lspci -vvv: 05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Vid= eo and Audio Decoder (rev 02) Subsystem: Hauppauge computer works Inc. Device 8101 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/0 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 08:02.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-= 2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. Device 4000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=3D0/1 = Enable+ Address: feeff00c Data: 4141 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, = L1 <4us ClockPM- Suprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt+= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 1, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Controls Capabilities: [160] Vendor Specific Information Kernel driver in use: pcieport Kernel modules: shpchp 00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port = 3 (rev 11) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=3D0/1 = Enable+ Address: feeff00c Data: 4149 Masking: 00000003 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, = L1 <4us ClockPM- Suprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt+= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 4, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Controls Kernel driver in use: pcieport Kernel modules: shpchp 00:08.0 System peripheral: Intel Corporation Core Processor System Manageme= nt Registers (rev 11) Subsystem: Device 0043:0083 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and S= cratchpad Registers (rev 11) Subsystem: Device 0043:0083 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- 00:08.2 System peripheral: Intel Corporation Core Processor System Control = and Status Registers (rev 11) Subsystem: Device 0043:0083 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous R= egisters (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: pciback 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High D= efinition Audio (rev 05) Subsystem: ASUSTeK Computer Inc. Device 8375 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Expr= ess Root Port 1 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L= 1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 80, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable+ Address: feeff00c Data: 4151 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Expr= ess Root Port 5 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L= 1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 84, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable+ Address: feeff00c Data: 4159 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Expr= ess Root Port 6 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L= 1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 85, PowerLimit 10.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable+ Address: feeff00c Data: 4161 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Expr= ess Root Port 7 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #7, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L= 1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 86, PowerLimit 10.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable+ Address: feeff00c Data: 4169 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Expr= ess Root Port 8 (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #8, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns,= L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-= ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 87, PowerLimit 10.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 = Enable+ Address: feeff00c Data: 4171 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8383 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2= Enhanced Host Controller (rev 05) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device 8383 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 8383 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Contro= ller (rev 05) Subsystem: ASUSTeK Computer Inc. Device 8383 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- Kernel modules: iTCO_wdt 00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 por= t SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 8383 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Control= ler (rev 05) Subsystem: ASUSTeK Computer Inc. Device 8383 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: ata_generic, pata_acpi 01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 43= 50] Subsystem: ASUSTeK Computer Inc. Device 032e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 400= 0 Series] Subsystem: ASUSTeK Computer Inc. Device aa38 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 43= 50] Subsystem: ASUSTeK Computer Inc. Device 0354 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel modules: radeon 02:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 400= 0 Series] Subsystem: ASUSTeK Computer Inc. Device aa38 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B = PCI Express Gigabit Ethernet controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 83a3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 AHCI Contro= ller (rev 03) (prog-if 01) Subsystem: ASUSTeK Computer Inc. Device 824f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=3D0/0 = Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: pciback Kernel modules: cx23885 08:01.0 PCI bridge: Pericom Semiconductor PI7C8140A PCI-to-PCI Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col= d-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [90] CompactPCI hot-swap Kernel modules: shpchp 08:02.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-= 2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. Device 4000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- Kernel driver in use: r8169 Kernel modules: r8169 09:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23= 416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. Device e807 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR-