[U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash?

[Stefan Roese <sr@denx.de>]

Hi Prakash,

On Friday 09 April 2010 14:11:39 prakash bedge wrote:
> >> What CPU are you using, and what chip-select is the flash using?
> 
> I am using PPC440x5 Cpu core. How to check the chip-select flash is using?

This is a custom PPC4xx version, correct? Which external bus controller is 
used here? The EBC from IBM as on the AMCC 4xx versions? You need to check 
your SoC documentation for this.

> Earlier I have run the same code for M29W128GH and it works fine. But with
> S29GL512 it is not working.
> Now the difference is only in size and write/read timings. So I believe it
> should work in smooth manner.

Right. Most likely you just need to tune the chip select timing registers. And 
of course the size of the CS. No idea how this is done for your external bus 
controller though.

BTW: You might also need to configure a bigger TLB entry for the FLASH now 
that you use a bigger FLASH chip.
 
> kilauea.h file is present in the U-boot.
> So does this board supports S29GL512P Nor flash chip?

Yes. As most AMCC eval boards do.
 
Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de