All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: Richard Henderson <rth@twiddle.net>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 05/21] tcg-i386: Tidy bswap operations.
Date: Mon, 19 Apr 2010 00:13:02 +0200	[thread overview]
Message-ID: <20100418221302.GA26784@volta.aurel32.net> (raw)
In-Reply-To: <e36e7f72dbd7724145773f759814a3c0a184c667.1271277329.git.rth@twiddle.net>

On Tue, Apr 13, 2010 at 04:33:59PM -0700, Richard Henderson wrote:
> Define OPC_BSWAP.  Factor opcode emission to separate functions.
> Use bswap+shift to implement 16-bit swap instead of a rolw; this
> gets the proper zero-extension required by INDEX_op_bswap16_i32.

This is not required by INDEX_op_bswap16_i32. What is need is that the
value in the input register has the 16 upper bits set to 0. Considering
that, the rolw instruction is faster than bswap + shift.

> Signed-off-by: Richard Henderson <rth@twiddle.net>
> ---
>  tcg/i386/tcg-target.c |   53 +++++++++++++++++++++++++------------------------
>  1 files changed, 27 insertions(+), 26 deletions(-)
> 
> diff --git a/tcg/i386/tcg-target.c b/tcg/i386/tcg-target.c
> index 75b9915..0bafd00 100644
> --- a/tcg/i386/tcg-target.c
> +++ b/tcg/i386/tcg-target.c
> @@ -163,6 +163,7 @@ static inline int tcg_target_const_match(tcg_target_long val,
>  
>  #define P_EXT   0x100 /* 0x0f opcode prefix */
>  
> +#define OPC_BSWAP	(0xc8 | P_EXT)
>  #define OPC_MOVZBL	(0xb6 | P_EXT)
>  #define OPC_MOVZWL	(0xb7 | P_EXT)
>  #define OPC_MOVSBL	(0xbe | P_EXT)

> @@ -339,6 +340,22 @@ static inline void tcg_out_ext16s(TCGContext *s, int dest, int src)
>      tcg_out_modrm(s, OPC_MOVSWL, dest, src);
>  }
>  
> +static inline void tcg_out_bswap32(TCGContext *s, int reg)
> +{
> +    tcg_out_opc(s, OPC_BSWAP + reg);
> +}
> +
> +static inline void tcg_out_bswap16(TCGContext *s, int reg, int sign)
> +{
> +    /* This swap+shift combination guarantees that the high part contains
> +       the sign or zero extension required.  It also doesn't suffer the
> +       problem of partial register stalls that using rolw does.  */
> +    tcg_out_bswap32(s, reg);
> +    /* shr $16, dest */
> +    tcg_out_modrm(s, 0xc1, (sign ? SHIFT_SAR : SHIFT_SHR), reg);
> +    tcg_out8(s, 16);
> +}
> +
>  static inline void tgen_arithi(TCGContext *s, int c, int r0, int32_t val, int cf)
>  {
>      if (!cf && ((c == ARITH_ADD && val == 1) || (c == ARITH_SUB && val == -1))) {
> @@ -745,31 +762,21 @@ static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args,
>          /* movzwl */
>          tcg_out_modrm_offset(s, OPC_MOVZWL, data_reg, r0, GUEST_BASE);
>          if (bswap) {
> -            /* rolw $8, data_reg */
> -            tcg_out8(s, 0x66); 
> -            tcg_out_modrm(s, 0xc1, 0, data_reg);
> -            tcg_out8(s, 8);
> +            tcg_out_bswap16(s, data_reg, 0);
>          }
>          break;
>      case 1 | 4:
>          /* movswl */
>          tcg_out_modrm_offset(s, OPC_MOVSWL, data_reg, r0, GUEST_BASE);
>          if (bswap) {
> -            /* rolw $8, data_reg */
> -            tcg_out8(s, 0x66); 
> -            tcg_out_modrm(s, 0xc1, 0, data_reg);
> -            tcg_out8(s, 8);
> -
> -            /* movswl data_reg, data_reg */
> -            tcg_out_modrm(s, OPC_MOVSWL, data_reg, data_reg);
> +            tcg_out_bswap16(s, data_reg, 1);
>          }
>          break;
>      case 2:
>          /* movl (r0), data_reg */
>          tcg_out_modrm_offset(s, 0x8b, data_reg, r0, GUEST_BASE);
>          if (bswap) {
> -            /* bswap */
> -            tcg_out_opc(s, (0xc8 + data_reg) | P_EXT);
> +            tcg_out_bswap32(s, data_reg);
>          }
>          break;
>      case 3:
> @@ -786,11 +793,10 @@ static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args,
>              tcg_out_modrm_offset(s, 0x8b, data_reg2, r0, GUEST_BASE + 4);
>          } else {
>              tcg_out_modrm_offset(s, 0x8b, data_reg, r0, GUEST_BASE + 4);
> -            tcg_out_opc(s, (0xc8 + data_reg) | P_EXT);
> +            tcg_out_bswap32(s, data_reg);
>  
>              tcg_out_modrm_offset(s, 0x8b, data_reg2, r0, GUEST_BASE);
> -            /* bswap */
> -            tcg_out_opc(s, (0xc8 + data_reg2) | P_EXT);
> +            tcg_out_bswap32(s, data_reg2);
>          }
>          break;
>      default:
> @@ -982,8 +988,7 @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args,
>      case 2:
>          if (bswap) {
>              tcg_out_mov(s, r1, data_reg);
> -            /* bswap data_reg */
> -            tcg_out_opc(s, (0xc8 + r1) | P_EXT);
> +            tcg_out_bswap32(s, r1);
>              data_reg = r1;
>          }
>          /* movl */
> @@ -992,12 +997,10 @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args,
>      case 3:
>          if (bswap) {
>              tcg_out_mov(s, r1, data_reg2);
> -            /* bswap data_reg */
> -            tcg_out_opc(s, (0xc8 + r1) | P_EXT);
> +            tcg_out_bswap32(s, r1);
>              tcg_out_modrm_offset(s, 0x89, r1, r0, GUEST_BASE);
>              tcg_out_mov(s, r1, data_reg);
> -            /* bswap data_reg */
> -            tcg_out_opc(s, (0xc8 + r1) | P_EXT);
> +            tcg_out_bswap32(s, r1);
>              tcg_out_modrm_offset(s, 0x89, r1, r0, GUEST_BASE + 4);
>          } else {
>              tcg_out_modrm_offset(s, 0x89, data_reg, r0, GUEST_BASE);
> @@ -1195,12 +1198,10 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
>          break;
>  
>      case INDEX_op_bswap16_i32:
> -        tcg_out8(s, 0x66);
> -        tcg_out_modrm(s, 0xc1, SHIFT_ROL, args[0]);
> -        tcg_out8(s, 8);
> +        tcg_out_bswap16(s, args[0], 0);
>          break;
>      case INDEX_op_bswap32_i32:
> -        tcg_out_opc(s, (0xc8 + args[0]) | P_EXT);
> +        tcg_out_bswap32(s, args[0]);
>          break;
>  
>      case INDEX_op_neg_i32:
> -- 
> 1.6.2.5
> 
> 
> 
> 

-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net

  reply	other threads:[~2010-04-18 22:13 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-14 20:35 [Qemu-devel] [PATCH 00/21] tcg-i386 cleanup and improvement Richard Henderson
2010-04-13 22:23 ` [Qemu-devel] [PATCH 01/21] tcg-i386: Allocate call-saved registers first Richard Henderson
2010-04-13 22:26 ` [Qemu-devel] [PATCH 02/21] tcg-i386: Tidy initialization of tcg_target_call_clobber_regs Richard Henderson
2010-04-13 22:59 ` [Qemu-devel] [PATCH 03/21] tcg-i386: Tidy ext8u and ext16u operations Richard Henderson
2010-04-13 23:13 ` [Qemu-devel] [PATCH 04/21] tcg-i386: Tidy ext8s and ext16s operations Richard Henderson
2010-04-13 23:33 ` [Qemu-devel] [PATCH 05/21] tcg-i386: Tidy bswap operations Richard Henderson
2010-04-18 22:13   ` Aurelien Jarno [this message]
2010-04-19 13:56     ` Richard Henderson
2010-04-19 16:05       ` malc
2010-04-19 19:19         ` Richard Henderson
2010-04-13 23:44 ` [Qemu-devel] [PATCH 06/21] tcg-i386: Tidy shift operations Richard Henderson
2010-04-14 14:58 ` [Qemu-devel] [PATCH 07/21] tcg-i386: Tidy move operations Richard Henderson
2010-04-14 15:06 ` [Qemu-devel] [PATCH 08/21] tcg-i386: Eliminate extra move from qemu_ld64 Richard Henderson
2010-04-14 15:26 ` [Qemu-devel] [PATCH 09/21] tcg-i386: Tidy jumps Richard Henderson
2010-04-14 15:38 ` [Qemu-devel] [PATCH 10/21] tcg-i386: Tidy immediate arithmetic operations Richard Henderson
2010-04-14 17:16 ` [Qemu-devel] [PATCH 11/21] tcg-i386: Tidy non-immediate " Richard Henderson
2010-04-14 17:20 ` [Qemu-devel] [PATCH 12/21] tcg-i386: Tidy movi Richard Henderson
2010-04-14 17:59 ` [Qemu-devel] [PATCH 13/21] tcg-i386: Tidy push/pop Richard Henderson
2010-04-14 18:02 ` [Qemu-devel] [PATCH 14/21] tcg-i386: Tidy calls Richard Henderson
2010-04-14 18:04 ` [Qemu-devel] [PATCH 15/21] tcg-i386: Tidy ret Richard Henderson
2010-04-14 18:07 ` [Qemu-devel] [PATCH 16/21] tcg-i386: Tidy setcc Richard Henderson
2010-04-14 18:22 ` [Qemu-devel] [PATCH 17/21] tcg-i386: Tidy unary arithmetic Richard Henderson
2010-04-14 18:29 ` [Qemu-devel] [PATCH 18/21] tcg-i386: Tidy multiply Richard Henderson
2010-04-14 18:32 ` [Qemu-devel] [PATCH 19/21] tcg-i386: Tidy xchg Richard Henderson
2010-04-14 19:08 ` [Qemu-devel] [PATCH 20/21] tcg-i386: Tidy lea Richard Henderson
2010-04-14 20:29 ` [Qemu-devel] [PATCH 21/21] tcg-i386: Use lea for three-operand add Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100418221302.GA26784@volta.aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.