All of lore.kernel.org
 help / color / mirror / Atom feed
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: s3c-hsotg fixes
Date: Sat, 12 Jun 2010 04:34:29 +0100	[thread overview]
Message-ID: <20100612033429.GJ3498@trinity.fluff.org> (raw)
In-Reply-To: <006c01cb0950$6ced3630$46c7a290$%szyprowski@samsung.com>

On Fri, Jun 11, 2010 at 12:25:26PM +0200, Marek Szyprowski wrote:
> Hello,
> 
> On Friday, June 11, 2010 10:21 AM Ben Dooks wrote:
> 
> > Some further fixes for the s3c-hsotg block, as well as a repost of
> > the missed USB phy clock setting patch which either got missed or
> > passed over from last time.
> > 
> > As a note, this series has a patch adding support for dedicated FIFO
> > mode, this is in my view a fix, as when the hsotg block is compiled
> > with dedicated fifos then each USB IN non-periodic pipe needs to be
> > alloacted a unique TX FIFO. We have no actual data on how well the
> > block performs when all IN TX NP FIFOs are all set to the same one,
> > but it really should be fixed.
> 
> This patch series improves the driver a lot. Now it is possible to get
> CDC Ethernet gadget working on S5PV210 SoC (Samsung Aquila machine).
> However there are still some issues left to be resolved. I've noticed
> the following things:
> 
> 1. CDC Ethernet gadget: there are problems after unplugging and 
> plugging the usb cable again while data is being transferred. To trigger
> this it is enough to run 'ping host' command on the device and replug
> the usb cable. After that no data packets are sent do the usb host
> (checked with hardware usb analyser), although the ep0 control transfers
> are performed correctly (device has been enumerated correctly).

Hmm, that is intereting. Maybe we broke non-ep0 fifos somehow
 
> 2. RNDIS Ethernet gadget: after some stress tests I get an error, which
> causes RNDIS session to hang (what is probably a direct result of the
> otg block reinit/reset). Here is an example log:

any particular kind of stress tests, or are you just telling it nasty
things to upset it? will try and look into this too.

 
> [   69.155000] s3c-hsotg s3c-hsotg: s3c_hsotg_handle_rx: unknown status 00000000
> [   69.155000] s3c-hsotg s3c-hsotg: DCFG=0x00040020, DCTL=0x00000000,
> DIEPMSK=000000af
> [   69.155000] s3c-hsotg s3c-hsotg: GAHBCFG=0x00000001, 0x44=0x00000000
> [   69.155000] s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x04000800
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[1] FSize=768, StAddr=0x00000f00
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[2] FSize=768, StAddr=0x00001200
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00001500
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00001800
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b00
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x00002700
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[10] FSize=768, StAddr=0x00002a00
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[11] FSize=768, StAddr=0x00002d00
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[12] FSize=768, StAddr=0x00003000
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00003300
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00003600
> [   69.155000] s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900
> [   69.155000] s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00028000, SIZ=0x00000000,
> DMA=0x085290ed
> [   69.155000] s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x80028000, SIZ=0x60000000,
> DMA=0xca625c65
> [   69.155000] s3c-hsotg s3c-hsotg: ep1-in: EPCTL=0x00488200, SIZ=0x20000000,
> DMA=0x5f9184b4
> [   69.155000] s3c-hsotg s3c-hsotg: ep1-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x318b408d
> [   69.155000] s3c-hsotg s3c-hsotg: ep2-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x50d8cf8b
> [   69.155000] s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x800b8200, SIZ=0x00180800,
> DMA=0x5792d85e
> [   69.155000] s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00cc8008, SIZ=0x00000000,
> DMA=0x5dee1680
> [   69.155000] s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0xa96c912b
> [   69.155000] s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x5e84ae7a
> [   69.155000] s3c-hsotg s3c-hsotg: ep4-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0xef2e9c78
> [   69.155000] s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x9d8f4d72
> [   69.155000] s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x93e82a21
> [   69.155000] s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x202acadf
> [   69.155000] s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x5520c3c9
> [   69.155000] s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x782200c2
> [   69.155000] s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0xeb0b8035
> [   69.155000] s3c-hsotg s3c-hsotg: ep8-in: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x002de535
> [   69.155000] s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000200, SIZ=0x00000000,
> DMA=0x8c0b77f7
> [   69.155000] s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xa59e32a0
> [   69.155000] s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0x07aa36a2
> [   69.155000] s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xc6732fd5
> [   69.155000] s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xfbf3f43d
> [   69.155000] s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xb1d750a4
> [   69.155000] s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0x30024c06
> [   69.155000] s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0x154162af
> [   69.155000] s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0x60f9ef07
> [   69.155000] s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xbea16bb2
> [   69.155000] s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xd1723f0c
> [   69.155000] s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0x40d1795b
> [   69.155000] s3c-hsotg s3c-hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000,
> DMA=0xc0b155d6
> [   69.155000] s3c-hsotg s3c-hsotg: DVBUSDIS=0x00000b8f, DVBUSPULSE=000002c6
> 
> I will try to investigate these issues further.
> 
> Best regards
> --
> Marek Szyprowski
> Samsung Poland R&D Center
> 
> 

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

  reply	other threads:[~2010-06-12  3:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-11  8:20 s3c-hsotg fixes Ben Dooks
2010-06-11  8:20 ` [PATCH 01/11] USB: s3c_hsotg: Add support for external USB clock Ben Dooks
2010-06-11  9:35   ` Marek Szyprowski
2010-06-11  9:46     ` Maurus Cuelenaere
2010-06-11  8:20 ` [PATCH 02/11] USB: s3c-hsotg: Increase TX fifo limit Ben Dooks
2010-06-11  8:20 ` [PATCH 03/11] USB: s3c-hsotg: The NPTX/PTX FIFO sizes are in words, not bytes Ben Dooks
2010-06-11  8:20 ` [PATCH 04/11] USB: s3c-hsotg: Avoid overwriting contents of perodic in 'fifo' Ben Dooks
2010-06-11  8:20 ` [PATCH 05/11] USB: s3c-hsotg: Re-initialise all FIFOs on USB bus reset Ben Dooks
2010-06-11  8:20 ` [PATCH 06/11] USB: s3c-hsotg: Add initial detection and setup for dedicated FIFO mode Ben Dooks
2010-06-11  8:54   ` Maurus Cuelenaere
2010-06-11  8:54     ` Maurus Cuelenaere
2010-06-11  8:20 ` [PATCH 07/11] USB: s3c-hsotg: Only load packet per fifo write Ben Dooks
2010-06-11  8:20 ` [PATCH 08/11] USB: s3c-hsotg: Check for new request before enqueing new setup Ben Dooks
2010-06-11  8:20 ` [PATCH 09/11] USB: s3c-hsotg: Fix max EP0 IN request length Ben Dooks
2010-06-11  8:20 ` [PATCH 10/11] USB: s3c-hsotg: Fix the OUT EP0 limit Ben Dooks
2010-06-11  9:01   ` Maurus Cuelenaere
2010-06-11  9:07   ` Marek Szyprowski
2010-06-11  8:20 ` [PATCH 11/11] USB: s3c-hsotg: Fix OUT packet request retry Ben Dooks
2010-06-11 10:25 ` s3c-hsotg fixes Marek Szyprowski
2010-06-12  3:34   ` Ben Dooks [this message]
2010-06-14  5:40     ` Marek Szyprowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100612033429.GJ3498@trinity.fluff.org \
    --to=ben-linux@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.