From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: [PATCH 3/5] ACPI / Wakeup: Simplify enabling of wakeup devices Date: Fri, 2 Jul 2010 00:13:26 +0200 Message-ID: <201007020013.27000.rjw__12603.3675893725$1278022671$gmane$org@sisk.pl> References: <201007020010.13755.rjw@sisk.pl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <201007020010.13755.rjw@sisk.pl> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: Len Brown Cc: ACPI Devel Maling List , linux-pm@lists.linux-foundation.org List-Id: linux-pm@vger.kernel.org From: Rafael J. Wysocki To simplify the enabling of wakeup devices during system suspend and hibernation, merge acpi_enable_wakeup_device_prep() with acpi_disable_wakeup_device() and remove unnecessary (and no longer valid) comments from the latter. Rename acpi_enable_wakeup_device() to acpi_enable_wakeup_devices() and acpi_disable_wakeup_device() to acpi_disable_wakeup_devices(), because these functions usually operate on multiple device objects. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 5 ++--- drivers/acpi/sleep.h | 5 ++--- drivers/acpi/wakeup.c | 50 +++++++++++--------------------------------------- 3 files changed, 15 insertions(+), 45 deletions(-) Index: linux-2.6/drivers/acpi/wakeup.c =================================================================== --- linux-2.6.orig/drivers/acpi/wakeup.c +++ linux-2.6/drivers/acpi/wakeup.c @@ -21,46 +21,18 @@ ACPI_MODULE_NAME("wakeup_devices") /** - * acpi_enable_wakeup_device_prep - Prepare wake-up devices. + * acpi_enable_wakeup_devices - Enable wake-up device GPEs. * @sleep_state: ACPI system sleep state. * - * Enable all wake-up devices' power, unless the requested system sleep state is - * too deep. + * Enable wakeup device power of devices with the state.enable flag set and set + * the wakeup enable mask bits in the GPE registers that correspond to wakeup + * devices. */ -void acpi_enable_wakeup_device_prep(u8 sleep_state) +void acpi_enable_wakeup_devices(u8 sleep_state) { struct list_head *node, *next; list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = container_of(node, - struct acpi_device, - wakeup_list); - - if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled - || (sleep_state > (u32) dev->wakeup.sleep_state)) - continue; - - acpi_enable_wakeup_device_power(dev, sleep_state); - } -} - -/** - * acpi_enable_wakeup_device - Enable wake-up device GPEs. - * @sleep_state: ACPI system sleep state. - * - * Enable all wake-up devices' GPEs, with the assumption that - * acpi_disable_all_gpes() was executed before, so we don't need to disable any - * GPEs here. - */ -void acpi_enable_wakeup_device(u8 sleep_state) -{ - struct list_head *node, *next; - - /* - * Caution: this routine must be invoked when interrupt is disabled - * Refer ACPI2.0: P212 - */ - list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -69,6 +41,9 @@ void acpi_enable_wakeup_device(u8 sleep_ || sleep_state > (u32) dev->wakeup.sleep_state) continue; + if (dev->wakeup.state.enabled) + acpi_enable_wakeup_device_power(dev, sleep_state); + /* The wake-up power should have been enabled already. */ acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_ENABLE); @@ -76,13 +51,10 @@ void acpi_enable_wakeup_device(u8 sleep_ } /** - * acpi_disable_wakeup_device - Disable devices' wakeup capability. + * acpi_disable_wakeup_devices - Disable devices' wakeup capability. * @sleep_state: ACPI system sleep state. - * - * This function only affects devices with wakeup.state.enabled set, which means - * that it reverses the changes made by acpi_enable_wakeup_device_prep(). */ -void acpi_disable_wakeup_device(u8 sleep_state) +void acpi_disable_wakeup_devices(u8 sleep_state) { struct list_head *node, *next; @@ -92,7 +64,7 @@ void acpi_disable_wakeup_device(u8 sleep if (!dev->wakeup.flags.valid || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count) - || (sleep_state > (u32) dev->wakeup.sleep_state)) + || sleep_state > (u32) dev->wakeup.sleep_state) continue; acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number, Index: linux-2.6/drivers/acpi/sleep.h =================================================================== --- linux-2.6.orig/drivers/acpi/sleep.h +++ linux-2.6/drivers/acpi/sleep.h @@ -2,9 +2,8 @@ extern u8 sleep_states[]; extern int acpi_suspend(u32 state); -extern void acpi_enable_wakeup_device_prep(u8 sleep_state); -extern void acpi_enable_wakeup_device(u8 sleep_state); -extern void acpi_disable_wakeup_device(u8 sleep_state); +extern void acpi_enable_wakeup_devices(u8 sleep_state); +extern void acpi_disable_wakeup_devices(u8 sleep_state); extern struct list_head acpi_wakeup_device_list; extern struct mutex acpi_device_lock; Index: linux-2.6/drivers/acpi/sleep.c =================================================================== --- linux-2.6.orig/drivers/acpi/sleep.c +++ linux-2.6/drivers/acpi/sleep.c @@ -73,8 +73,7 @@ static int acpi_sleep_prepare(u32 acpi_s #endif printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", acpi_state); - acpi_enable_wakeup_device_prep(acpi_state); - acpi_enable_wakeup_device(acpi_state); + acpi_enable_wakeup_devices(acpi_state); acpi_enter_sleep_state_prep(acpi_state); return 0; } @@ -154,7 +153,7 @@ static void acpi_pm_finish(void) printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", acpi_state); - acpi_disable_wakeup_device(acpi_state); + acpi_disable_wakeup_devices(acpi_state); acpi_leave_sleep_state(acpi_state); /* reset firmware waking vector */