From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Wed, 14 Jul 2010 22:59:15 +0200 Subject: [U-Boot] (imp) uboot image size In-Reply-To: <4C3E20A3.1020600@free.fr> References: <20100714061023.59E49160691@gemini.denx.de> <20100714202920.2CB9A160691@gemini.denx.de> <4C3E20A3.1020600@free.fr> Message-ID: <20100714205915.19AF9160691@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Albert ARIBAUD, In message <4C3E20A3.1020600@free.fr> you wrote: > > > Eventually your processor (which you do not care to mention) has it's > > reset entry point at the end of the physical addess space, so this > > will always be included in theimage - the further you move TEXT_BASE > > down, the bigger your image will be. > > Uhm... At least for edminiv2 (and I assume, for other orion5x-based > boards as well) changing TEXT_BASE in the board's config.mk does not > change the size of the u-boot image; it just changes the RAM address at > which it shall relocate and run. I think I am aware of this :-) Actually this is the very reason why I am pretty sure that the OP is on a PPC box with the reset vector at 0xFFFFFFFC being part of the image. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "If anything can go wrong, it will." - Edsel Murphy