All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Kārlis Repsons" <k@11.lv>
To: Pekka Paalanen <pq-X3B1VOXEql0@public.gmane.org>
Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: 2 cards in, but work only separately
Date: Sun, 1 Aug 2010 08:59:28 +0000	[thread overview]
Message-ID: <201008010859.40932.k@11.lv> (raw)
In-Reply-To: <20100801114104.43f1b5e4-cxYvVS3buNOdIgDiPM52R8c4bpwCjbIv@public.gmane.org>


[-- Attachment #1.1.1: Type: Text/Plain, Size: 1556 bytes --]

On Sunday 01 August 2010 08:41:04 Pekka Paalanen wrote:
> On Sat, 31 Jul 2010 22:08:23 +0000
> 
> Kārlis Repsons <k@11.lv> wrote:
> > Hi list,
> > my thanks to developers of nouveau first: I wonder how you put it
> > together this far, where there's quite enough to appreciate!
> > 
> > This question I have: strangely I can get each of 2 cards to work
> > separately for a dualseat PC by toggling on/off fbcon=map: kernel
> > option (compiled with CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY)
> > -- by doing so I can have each card initialized and start it's
> > Xorg, all welll, but can't have both cards initialized (and thus
> > used) -- why?
> > 
> > In very short, this is what my dmesg says:
> > [drm] Initialized drm 1.1.0 20060810
> > nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
> > minor 0 nouveau 0000:04:00.0: enabling device (0000 -> 0002)
> > nouveau 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > nouveau 0000:04:00.0: PCI INT A disabled
> > nouveau: probe of 0000:04:00.0 failed with error -12
> 
> Is this really a continuous section of the kernel log, no
> lines removed from between?
No, I removed! See all in attach!

> What versions of the Nouveau components and the kernel you have?
> What cards do you have?
Linux 2.6.34-gentoo-r2 (no DRM or nouveau driver in);

nouveau-drm 20100520 from portage (gives me ch7006.ko drm_kms_helper.ko drm.ko 
nouveau.ko ttm.ko);

GeForce 7300GS, GeForce 6200LE!

[-- Attachment #1.1.2: cardcrash.all --]
[-- Type: text/plain, Size: 5176 bytes --]

...
[drm] Initialized drm 1.1.0 20060810
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046f00a3)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.72.22.43
[drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:01:00.0: BIT table 'd' not found
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c080
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
[drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91
[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[TTM] Zone  kernel: Available graphics memory: 4093048 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] nouveau 0000:01:00.0: Detected a VGA connector
[drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[drm] nouveau 0000:01:00.0: Detected a TV connector
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88023ed4d000
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 1 using output A
[drm] nouveau 0000:01:00.0: 0xD4A0: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
[drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 1 using output A
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
nouveau 0000:04:00.0: enabling device (0000 -> 0002)
nouveau 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:04:00.0: setting latency timer to 64
[drm] nouveau 0000:04:00.0: Detected an NV40 generation card (0x044300b2)
[drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:04:00.0: ... appears to be valid
[drm] nouveau 0000:04:00.0: BIT BIOS found
[drm] nouveau 0000:04:00.0: Bios version 05.44.02.67
[drm] nouveau 0000:04:00.0: BIT table 'd' not found
[drm] nouveau 0000:04:00.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000300 00000028
[drm] nouveau 0000:04:00.0: Raw DCB entry 1: 02011310 00000028
[drm] nouveau 0000:04:00.0: Raw DCB entry 2: 01011312 00000000
[drm] nouveau 0000:04:00.0: Raw DCB entry 3: 020223f1 0080c020
[drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x30 5 7 2
[drm] nouveau 0000:04:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:04:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[drm] nouveau 0000:04:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xDCEA
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xE04F
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE589
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE6DE
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE888
[drm] nouveau 0000:04:00.0: Detected 0MiB VRAM
nouveau 0000:04:00.0: PCI INT A disabled
nouveau: probe of 0000:04:00.0 failed with error -12
...

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

  parent reply	other threads:[~2010-08-01  8:59 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-31 22:08 2 cards in, but work only separately Kārlis Repsons
     [not found] ` <201007312208.33260.k-atMwuq7AWwA@public.gmane.org>
2010-08-01  8:41   ` Pekka Paalanen
     [not found]     ` <20100801114104.43f1b5e4-cxYvVS3buNOdIgDiPM52R8c4bpwCjbIv@public.gmane.org>
2010-08-01  8:59       ` Kārlis Repsons [this message]
     [not found]         ` <201008010859.40932.k-atMwuq7AWwA@public.gmane.org>
2010-08-01 10:30           ` Marcin Slusarz
     [not found]             ` <20100801103002.GA2719-OI9uyE9O0yo@public.gmane.org>
2010-08-02  9:19               ` Kārlis Repsons
     [not found]                 ` <201008020919.46649.k-atMwuq7AWwA@public.gmane.org>
2010-08-02 11:33                   ` Francisco Jerez
     [not found]                     ` <87wrs9jll1.fsf-sGOZH3hwPm2sTnJN9+BGXg@public.gmane.org>
2010-08-02 13:31                       ` Kārlis Repsons
     [not found]                         ` <201008021332.02470.k-atMwuq7AWwA@public.gmane.org>
2010-08-02 14:07                           ` Francisco Jerez
     [not found]                             ` <87sk2xhzvs.fsf-sGOZH3hwPm2sTnJN9+BGXg@public.gmane.org>
2010-08-02 15:01                               ` Kārlis Repsons
     [not found]                                 ` <201008021501.30085.k-atMwuq7AWwA@public.gmane.org>
2010-08-06 19:16                                   ` Francisco Jerez
2010-08-01 11:35           ` Francisco Jerez
2010-08-02 19:11 Kārlis Repsons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201008010859.40932.k@11.lv \
    --to=k@11.lv \
    --cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=pq-X3B1VOXEql0@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.