[PATCH 1/3] PCI: define max devices number on PCIBus as PCIBUS_MAX_DEVICES in pci.h

[PATCH 1/3] PCI: define max devices number on PCIBus as PCIBUS_MAX_DEVICES in pci.h

[Ken CC]

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/pci.c |    2 +-
 hw/pci.h |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/hw/pci.c b/hw/pci.c
index 70dbace..02019a1 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -47,7 +47,7 @@ struct PCIBus {
     pci_hotplug_fn hotplug;
     DeviceState *hotplug_qdev;
     void *irq_opaque;
-    PCIDevice *devices[256];
+    PCIDevice *devices[PCIBUS_MAX_DEVICES];
     PCIDevice *parent_dev;
     target_phys_addr_t mem_base;
 
diff --git a/hw/pci.h b/hw/pci.h
index ccb99d0..f90840c 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -100,6 +100,7 @@ typedef struct PCIIORegion {
 
 #define PCI_ROM_SLOT 6
 #define PCI_NUM_REGIONS 7
+#define PCIBUS_MAX_DEVICES 256
 
 #include "pci_regs.h"
 

[Qemu-devel] [PATCH 1/3] PCI: define max devices number on PCIBus as PCIBUS_MAX_DEVICES in pci.h

[Ken CC]

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/pci.c |    2 +-
 hw/pci.h |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/hw/pci.c b/hw/pci.c
index 70dbace..02019a1 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -47,7 +47,7 @@ struct PCIBus {
     pci_hotplug_fn hotplug;
     DeviceState *hotplug_qdev;
     void *irq_opaque;
-    PCIDevice *devices[256];
+    PCIDevice *devices[PCIBUS_MAX_DEVICES];
     PCIDevice *parent_dev;
     target_phys_addr_t mem_base;
 
diff --git a/hw/pci.h b/hw/pci.h
index ccb99d0..f90840c 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -100,6 +100,7 @@ typedef struct PCIIORegion {
 
 #define PCI_ROM_SLOT 6
 #define PCI_NUM_REGIONS 7
+#define PCIBUS_MAX_DEVICES 256
 
 #include "pci_regs.h"
 

[PATCH 2/3] pci init: fail qemu if devfn exceeding the max devices number supported on bus

[Ken CC]

assert(devfn < PCIBUS_MAX_DEVICES)

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/pci.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/hw/pci.c b/hw/pci.c
index 02019a1..1e804da 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -747,6 +747,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
                                          PCIConfigWriteFunc *config_write,
                                          bool is_bridge)
 {
+    assert(devfn < PCIBUS_MAX_DEVICES);
     if (devfn < 0) {
         for(devfn = bus->devfn_min ; devfn < ARRAY_SIZE(bus->devices);
             devfn += PCI_FUNC_MAX) {

[Qemu-devel] [PATCH 2/3] pci init: fail qemu if devfn exceeding the max devices number supported on bus

[Ken CC]

assert(devfn < PCIBUS_MAX_DEVICES)

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/pci.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/hw/pci.c b/hw/pci.c
index 02019a1..1e804da 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -747,6 +747,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
                                          PCIConfigWriteFunc *config_write,
                                          bool is_bridge)
 {
+    assert(devfn < PCIBUS_MAX_DEVICES);
     if (devfn < 0) {
         for(devfn = bus->devfn_min ; devfn < ARRAY_SIZE(bus->devices);
             devfn += PCI_FUNC_MAX) {

[PATCH 3/3] Check pci slot number in parse_pci_devfn

[Ken CC]

Define MAX_PCI_SLOTS as 0x1f, if pci addr provided from command line
is bigger than 0x1f, return error -EINVAL.

0x1f << 3 | 7 == 255 (PCIBUS_MAX_DEVICES - 1)

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/qdev-properties.c |    2 ++
 hw/qdev.h            |    3 +++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
index 9219cd7..96d814c 100644
--- a/hw/qdev-properties.c
+++ b/hw/qdev-properties.c
@@ -514,6 +514,8 @@ static int parse_pci_devfn(DeviceState *dev, Property *prop, const char *str)
             return -EINVAL;
         }
     }
+    if (slot > MAX_PCI_SLOTS)
+        return -EINVAL;
     if (str[n] != '\0')
         return -EINVAL;
     if (fn > 7)
diff --git a/hw/qdev.h b/hw/qdev.h
index 678f8b7..fcfe52e 100644
--- a/hw/qdev.h
+++ b/hw/qdev.h
@@ -7,6 +7,9 @@
 #include "qemu-char.h"
 #include "qemu-option.h"
 
+
+#define MAX_PCI_SLOTS 0x1f
+
 typedef struct Property Property;
 
 typedef struct PropertyInfo PropertyInfo;

[Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Ken CC]

Define MAX_PCI_SLOTS as 0x1f, if pci addr provided from command line
is bigger than 0x1f, return error -EINVAL.

0x1f << 3 | 7 == 255 (PCIBUS_MAX_DEVICES - 1)

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/qdev-properties.c |    2 ++
 hw/qdev.h            |    3 +++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
index 9219cd7..96d814c 100644
--- a/hw/qdev-properties.c
+++ b/hw/qdev-properties.c
@@ -514,6 +514,8 @@ static int parse_pci_devfn(DeviceState *dev, Property *prop, const char *str)
             return -EINVAL;
         }
     }
+    if (slot > MAX_PCI_SLOTS)
+        return -EINVAL;
     if (str[n] != '\0')
         return -EINVAL;
     if (fn > 7)
diff --git a/hw/qdev.h b/hw/qdev.h
index 678f8b7..fcfe52e 100644
--- a/hw/qdev.h
+++ b/hw/qdev.h
@@ -7,6 +7,9 @@
 #include "qemu-char.h"
 #include "qemu-option.h"
 
+
+#define MAX_PCI_SLOTS 0x1f
+
 typedef struct Property Property;
 
 typedef struct PropertyInfo PropertyInfo;

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

Add Cc: mst@redhat.com.

MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
And the name should be start with PCI_ prefix for consistency?

Except that, the patches look okay.

thanks,

On Tue, Aug 24, 2010 at 02:49:27PM +0800, Ken CC wrote:
> Define MAX_PCI_SLOTS as 0x1f, if pci addr provided from command line
> is bigger than 0x1f, return error -EINVAL.
> 
> 0x1f << 3 | 7 == 255 (PCIBUS_MAX_DEVICES - 1)
> 
> Signed-off-by: Ken CC <ken.ccao@gmail.com>
> ---
>  hw/qdev-properties.c |    2 ++
>  hw/qdev.h            |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
> index 9219cd7..96d814c 100644
> --- a/hw/qdev-properties.c
> +++ b/hw/qdev-properties.c
> @@ -514,6 +514,8 @@ static int parse_pci_devfn(DeviceState *dev, Property *prop, const char *str)
>              return -EINVAL;
>          }
>      }
> +    if (slot > MAX_PCI_SLOTS)
> +        return -EINVAL;
>      if (str[n] != '\0')
>          return -EINVAL;
>      if (fn > 7)
> diff --git a/hw/qdev.h b/hw/qdev.h
> index 678f8b7..fcfe52e 100644
> --- a/hw/qdev.h
> +++ b/hw/qdev.h
> @@ -7,6 +7,9 @@
>  #include "qemu-char.h"
>  #include "qemu-option.h"
>  
> +
> +#define MAX_PCI_SLOTS 0x1f
> +
>  typedef struct Property Property;
>  
>  typedef struct PropertyInfo PropertyInfo;
> 
> 

-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

Add Cc: mst@redhat.com.

MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
And the name should be start with PCI_ prefix for consistency?

Except that, the patches look okay.

thanks,

On Tue, Aug 24, 2010 at 02:49:27PM +0800, Ken CC wrote:
> Define MAX_PCI_SLOTS as 0x1f, if pci addr provided from command line
> is bigger than 0x1f, return error -EINVAL.
> 
> 0x1f << 3 | 7 == 255 (PCIBUS_MAX_DEVICES - 1)
> 
> Signed-off-by: Ken CC <ken.ccao@gmail.com>
> ---
>  hw/qdev-properties.c |    2 ++
>  hw/qdev.h            |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
> index 9219cd7..96d814c 100644
> --- a/hw/qdev-properties.c
> +++ b/hw/qdev-properties.c
> @@ -514,6 +514,8 @@ static int parse_pci_devfn(DeviceState *dev, Property *prop, const char *str)
>              return -EINVAL;
>          }
>      }
> +    if (slot > MAX_PCI_SLOTS)
> +        return -EINVAL;
>      if (str[n] != '\0')
>          return -EINVAL;
>      if (fn > 7)
> diff --git a/hw/qdev.h b/hw/qdev.h
> index 678f8b7..fcfe52e 100644
> --- a/hw/qdev.h
> +++ b/hw/qdev.h
> @@ -7,6 +7,9 @@
>  #include "qemu-char.h"
>  #include "qemu-option.h"
>  
> +
> +#define MAX_PCI_SLOTS 0x1f
> +
>  typedef struct Property Property;
>  
>  typedef struct PropertyInfo PropertyInfo;
> 
> 

-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
> Add Cc: mst@redhat.com.
>
> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
> And the name should be start with PCI_ prefix for consistency?
>
> Except that, the patches look okay.
>

These aren't slots, are they?  They are functions.

There's a lot of slot/function confusion in qemu.

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
> Add Cc: mst@redhat.com.
>
> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
> And the name should be start with PCI_ prefix for consistency?
>
> Except that, the patches look okay.
>

These aren't slots, are they?  They are functions.

There's a lot of slot/function confusion in qemu.

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>> Add Cc: mst@redhat.com.
>>
>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>> And the name should be start with PCI_ prefix for consistency?
>>
>> Except that, the patches look okay.
>>
>
> These aren't slots, are they?  They are functions.

The function checks if given $slot.$fn (or $slot) is valid.
So it's slots. max 32.

> There's a lot of slot/function confusion in qemu.

Agreed.
-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>> Add Cc: mst@redhat.com.
>>
>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>> And the name should be start with PCI_ prefix for consistency?
>>
>> Except that, the patches look okay.
>>
>
> These aren't slots, are they?  They are functions.

The function checks if given $slot.$fn (or $slot) is valid.
So it's slots. max 32.

> There's a lot of slot/function confusion in qemu.

Agreed.
-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>> Add Cc: mst@redhat.com.
>>>
>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>> And the name should be start with PCI_ prefix for consistency?
>>>
>>> Except that, the patches look okay.
>>>
>> These aren't slots, are they?  They are functions.
> The function checks if given $slot.$fn (or $slot) is valid.
> So it's slots. max 32.

+    assert(devfn<  PCIBUS_MAX_DEVICES);


Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>> Add Cc: mst@redhat.com.
>>>
>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>> And the name should be start with PCI_ prefix for consistency?
>>>
>>> Except that, the patches look okay.
>>>
>> These aren't slots, are they?  They are functions.
> The function checks if given $slot.$fn (or $slot) is valid.
> So it's slots. max 32.

+    assert(devfn<  PCIBUS_MAX_DEVICES);


Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Chen Cao]

On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
> >On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
> >>  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
> >>>Add Cc: mst@redhat.com.
> >>>
> >>>MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
> >>>And the name should be start with PCI_ prefix for consistency?
> >>>
> >>>Except that, the patches look okay.
> >>>
> >>These aren't slots, are they?  They are functions.
> >The function checks if given $slot.$fn (or $slot) is valid.
> >So it's slots. max 32.
> 
> +    assert(devfn<  PCIBUS_MAX_DEVICES);
> 
> 
> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
> 

PCIBUS_MAX_DEVICES is the size of PCIBus.devices[], I have added it in
the first patch at the defination of struct PCIBus, line 50 hw/pci.c.
so i think the better name of the macro should be PCIBUS_MAX_FN,
right?


Ken

> -- 
> error compiling committee.c: too many arguments to function
> 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Chen Cao]

On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
> >On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
> >>  On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
> >>>Add Cc: mst@redhat.com.
> >>>
> >>>MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
> >>>And the name should be start with PCI_ prefix for consistency?
> >>>
> >>>Except that, the patches look okay.
> >>>
> >>These aren't slots, are they?  They are functions.
> >The function checks if given $slot.$fn (or $slot) is valid.
> >So it's slots. max 32.
> 
> +    assert(devfn<  PCIBUS_MAX_DEVICES);
> 
> 
> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
> 

PCIBUS_MAX_DEVICES is the size of PCIBus.devices[], I have added it in
the first patch at the defination of struct PCIBus, line 50 hw/pci.c.
so i think the better name of the macro should be PCIBUS_MAX_FN,
right?


Ken

> -- 
> error compiling committee.c: too many arguments to function
> 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:16 PM, Chen Cao wrote:
> On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>>> Add Cc: mst@redhat.com.
>>>>>
>>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>>> And the name should be start with PCI_ prefix for consistency?
>>>>>
>>>>> Except that, the patches look okay.
>>>>>
>>>> These aren't slots, are they?  They are functions.
>>> The function checks if given $slot.$fn (or $slot) is valid.
>>> So it's slots. max 32.
>> +    assert(devfn<   PCIBUS_MAX_DEVICES);
>>
>>
>> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
>>
> PCIBUS_MAX_DEVICES is the size of PCIBus.devices[], I have added it in
> the first patch at the defination of struct PCIBus, line 50 hw/pci.c.
> so i think the better name of the macro should be PCIBUS_MAX_FN,
> right?

Or make it 32 and scale it by PCI_FUNCTIONS_PER_DEVICE.

PCIBus.devices[] should be renamed to functions[] (later).

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:16 PM, Chen Cao wrote:
> On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>>> Add Cc: mst@redhat.com.
>>>>>
>>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>>> And the name should be start with PCI_ prefix for consistency?
>>>>>
>>>>> Except that, the patches look okay.
>>>>>
>>>> These aren't slots, are they?  They are functions.
>>> The function checks if given $slot.$fn (or $slot) is valid.
>>> So it's slots. max 32.
>> +    assert(devfn<   PCIBUS_MAX_DEVICES);
>>
>>
>> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
>>
> PCIBUS_MAX_DEVICES is the size of PCIBus.devices[], I have added it in
> the first patch at the defination of struct PCIBus, line 50 hw/pci.c.
> so i think the better name of the macro should be PCIBUS_MAX_FN,
> right?

Or make it 32 and scale it by PCI_FUNCTIONS_PER_DEVICE.

PCIBus.devices[] should be renamed to functions[] (later).

-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>> Add Cc: mst@redhat.com.
>>>>
>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>> And the name should be start with PCI_ prefix for consistency?
>>>>
>>>> Except that, the patches look okay.
>>>>
>>> These aren't slots, are they?  They are functions.
>> The function checks if given $slot.$fn (or $slot) is valid.
>> So it's slots. max 32.
>
> +    assert(devfn<  PCIBUS_MAX_DEVICES);
>
>
> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.

Ah, you're talking about 2/3. I talked about 3/3.
You're right. The name is misleading.
PCIBUS_MAX_FUNCTIONS? Or suggestions?
-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Isaku Yamahata]

On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>  On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>   On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>> Add Cc: mst@redhat.com.
>>>>
>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>> And the name should be start with PCI_ prefix for consistency?
>>>>
>>>> Except that, the patches look okay.
>>>>
>>> These aren't slots, are they?  They are functions.
>> The function checks if given $slot.$fn (or $slot) is valid.
>> So it's slots. max 32.
>
> +    assert(devfn<  PCIBUS_MAX_DEVICES);
>
>
> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.

Ah, you're talking about 2/3. I talked about 3/3.
You're right. The name is misleading.
PCIBUS_MAX_FUNCTIONS? Or suggestions?
-- 
yamahata

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:24 PM, Isaku Yamahata wrote:
> On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>>    On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>>> Add Cc: mst@redhat.com.
>>>>>
>>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>>> And the name should be start with PCI_ prefix for consistency?
>>>>>
>>>>> Except that, the patches look okay.
>>>>>
>>>> These aren't slots, are they?  They are functions.
>>> The function checks if given $slot.$fn (or $slot) is valid.
>>> So it's slots. max 32.
>> +    assert(devfn<   PCIBUS_MAX_DEVICES);
>>
>>
>> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
> Ah, you're talking about 2/3. I talked about 3/3.
> You're right. The name is misleading.
> PCIBUS_MAX_FUNCTIONS? Or suggestions?

Or assert(devfn / 8 < PCIBUS_MAX_DEVICES) (and change that to be 32).


-- 
error compiling committee.c: too many arguments to function

Re: [Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Avi Kivity]

  On 08/24/2010 03:24 PM, Isaku Yamahata wrote:
> On Tue, Aug 24, 2010 at 03:04:44PM +0300, Avi Kivity wrote:
>>   On 08/24/2010 03:07 PM, Isaku Yamahata wrote:
>>> On Tue, Aug 24, 2010 at 02:42:18PM +0300, Avi Kivity wrote:
>>>>    On 08/24/2010 02:35 PM, Isaku Yamahata wrote:
>>>>> Add Cc: mst@redhat.com.
>>>>>
>>>>> MAX_PCI_SLOTS should be in pci.h instead of qdev.h?
>>>>> And the name should be start with PCI_ prefix for consistency?
>>>>>
>>>>> Except that, the patches look okay.
>>>>>
>>>> These aren't slots, are they?  They are functions.
>>> The function checks if given $slot.$fn (or $slot) is valid.
>>> So it's slots. max 32.
>> +    assert(devfn<   PCIBUS_MAX_DEVICES);
>>
>>
>> Looks like we're comparing a function number to PCIBUS_MAX_DEVICES.
> Ah, you're talking about 2/3. I talked about 3/3.
> You're right. The name is misleading.
> PCIBUS_MAX_FUNCTIONS? Or suggestions?

Or assert(devfn / 8 < PCIBUS_MAX_DEVICES) (and change that to be 32).


-- 
error compiling committee.c: too many arguments to function

[Qemu-devel] [PATCH 3/3] Check pci slot number in parse_pci_devfn

[Ken CC]

Define MAX_PCI_SLOTS as 0x1f, if pci addr provided from command line
is bigger than 0x1f, return error -EINVAL.

0x1f << 3 | 7 == 255 (PCIBUS_MAX_DEVICES - 1)

Signed-off-by: Ken CC <ken.ccao@gmail.com>
---
 hw/qdev-properties.c |    2 ++
 hw/qdev.h            |    3 +++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
index 9219cd7..96d814c 100644
--- a/hw/qdev-properties.c
+++ b/hw/qdev-properties.c
@@ -514,6 +514,8 @@ static int parse_pci_devfn(DeviceState *dev, Property *prop, const char *str)
             return -EINVAL;
         }
     }
+    if (slot > MAX_PCI_SLOTS)
+        return -EINVAL;
     if (str[n] != '\0')
         return -EINVAL;
     if (fn > 7)
diff --git a/hw/qdev.h b/hw/qdev.h
index 678f8b7..fcfe52e 100644
--- a/hw/qdev.h
+++ b/hw/qdev.h
@@ -7,6 +7,9 @@
 #include "qemu-char.h"
 #include "qemu-option.h"
 
+
+#define MAX_PCI_SLOTS 0x1f
+
 typedef struct Property Property;
 
 typedef struct PropertyInfo PropertyInfo;