All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
@ 2010-09-13  5:21 Peter Tyser
  2010-09-13  5:34 ` Wolfgang Denk
  2010-10-12 20:49 ` Wolfgang Denk
  0 siblings, 2 replies; 8+ messages in thread
From: Peter Tyser @ 2010-09-13  5:21 UTC (permalink / raw)
  To: u-boot

BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every
PowerPC board, so share a common definition.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
---
It looks like there are only a few boards (5) that use the warm/cold
boot concept, maybe we should remove this largely unused feature?
Or at least remove it for most CPU types?  Is anyone out there
using it?

 arch/powerpc/cpu/74xx_7xx/start.S  |    1 +
 arch/powerpc/cpu/mpc512x/start.S   |    1 +
 arch/powerpc/cpu/mpc5xx/start.S    |    1 +
 arch/powerpc/cpu/mpc5xxx/start.S   |    1 +
 arch/powerpc/cpu/mpc8220/start.S   |    1 +
 arch/powerpc/cpu/mpc824x/start.S   |    1 +
 arch/powerpc/cpu/mpc8260/start.S   |    1 +
 arch/powerpc/cpu/mpc83xx/start.S   |    1 +
 arch/powerpc/cpu/mpc86xx/start.S   |    1 +
 arch/powerpc/cpu/mpc8xx/start.S    |    1 +
 arch/powerpc/include/asm/u-boot.h  |    5 +++++
 board/fads/fads.h                  |    8 --------
 include/configs/A3000.h            |    8 --------
 include/configs/ADCIOP.h           |    9 ---------
 include/configs/AMX860.h           |    8 --------
 include/configs/AP1000.h           |    8 --------
 include/configs/APC405.h           |    8 --------
 include/configs/AR405.h            |    8 --------
 include/configs/ASH405.h           |    8 --------
 include/configs/ATUM8548.h         |    8 --------
 include/configs/Adder.h            |    8 --------
 include/configs/Alaska8220.h       |    3 ---
 include/configs/BAB7xx.h           |    9 ---------
 include/configs/BC3450.h           |    3 ---
 include/configs/BMW.h              |    9 ---------
 include/configs/CANBT.h            |    9 ---------
 include/configs/CATcenter.h        |    9 ---------
 include/configs/CCM.h              |    9 ---------
 include/configs/CMS700.h           |    8 --------
 include/configs/CPC45.h            |    9 ---------
 include/configs/CPCI2DP.h          |    8 --------
 include/configs/CPCI405.h          |    9 ---------
 include/configs/CPCI4052.h         |    9 ---------
 include/configs/CPCI405AB.h        |    9 ---------
 include/configs/CPCI405DT.h        |    8 --------
 include/configs/CPCI750.h          |    8 --------
 include/configs/CPCIISER4.h        |    8 --------
 include/configs/CPU86.h            |    9 ---------
 include/configs/CPU87.h            |    9 ---------
 include/configs/CRAYL1.h           |    8 --------
 include/configs/CU824.h            |    8 --------
 include/configs/DASA_SIM.h         |    9 ---------
 include/configs/DB64360.h          |    8 --------
 include/configs/DB64460.h          |    8 --------
 include/configs/DP405.h            |    8 --------
 include/configs/DU405.h            |    9 ---------
 include/configs/DU440.h            |    8 --------
 include/configs/ELPPC.h            |    8 --------
 include/configs/ELPT860.h          |   13 -------------
 include/configs/EP88x.h            |    8 --------
 include/configs/ERIC.h             |    8 --------
 include/configs/ESTEEM192E.h       |   18 ------------------
 include/configs/ETX094.h           |    9 ---------
 include/configs/EVB64260.h         |    8 --------
 include/configs/EXBITGEN.h         |    8 --------
 include/configs/FADS823.h          |    8 --------
 include/configs/FADS850SAR.h       |    8 --------
 include/configs/FLAGADM.h          |    8 --------
 include/configs/FPS850L.h          |    9 ---------
 include/configs/FPS860L.h          |    9 ---------
 include/configs/G2000.h            |    8 --------
 include/configs/GEN860T.h          |    6 ------
 include/configs/GENIETV.h          |    8 --------
 include/configs/HH405.h            |    8 --------
 include/configs/HIDDEN_DRAGON.h    |    8 --------
 include/configs/HMI10.h            |    9 ---------
 include/configs/HUB405.h           |    8 --------
 include/configs/IAD210.h           |    9 ---------
 include/configs/ICU862.h           |    9 ---------
 include/configs/IDS8247.h          |    9 ---------
 include/configs/IP860.h            |   14 --------------
 include/configs/IPHASE4539.h       |    9 ---------
 include/configs/ISPAN.h            |    8 --------
 include/configs/IVML24.h           |    9 ---------
 include/configs/IVMS8.h            |    9 ---------
 include/configs/IceCube.h          |    3 ---
 include/configs/JSE.h              |    9 ---------
 include/configs/KAREF.h            |    8 --------
 include/configs/KUP4K.h            |    9 ---------
 include/configs/KUP4X.h            |    9 ---------
 include/configs/LANTEC.h           |    8 --------
 include/configs/MBX.h              |    8 --------
 include/configs/MBX860T.h          |    8 --------
 include/configs/METROBOX.h         |    8 --------
 include/configs/MHPC.h             |    8 --------
 include/configs/MIP405.h           |    9 ---------
 include/configs/ML2.h              |    8 --------
 include/configs/MOUSSE.h           |    9 ---------
 include/configs/MPC8260ADS.h       |    3 ---
 include/configs/MPC8266ADS.h       |    3 ---
 include/configs/MPC8308RDB.h       |    8 --------
 include/configs/MPC8313ERDB.h      |    8 --------
 include/configs/MPC8315ERDB.h      |    8 --------
 include/configs/MPC8323ERDB.h      |    8 --------
 include/configs/MPC832XEMDS.h      |    8 --------
 include/configs/MPC8349EMDS.h      |    8 --------
 include/configs/MPC8349ITX.h       |    8 --------
 include/configs/MPC8360EMDS.h      |    8 --------
 include/configs/MPC8360ERDK.h      |    8 --------
 include/configs/MPC837XEMDS.h      |    8 --------
 include/configs/MPC837XERDB.h      |    8 --------
 include/configs/MPC8536DS.h        |    8 --------
 include/configs/MPC8540ADS.h       |    8 --------
 include/configs/MPC8540EVAL.h      |    8 --------
 include/configs/MPC8541CDS.h       |    8 --------
 include/configs/MPC8544DS.h        |    8 --------
 include/configs/MPC8548CDS.h       |    8 --------
 include/configs/MPC8555CDS.h       |    8 --------
 include/configs/MPC8560ADS.h       |    8 --------
 include/configs/MPC8568MDS.h       |    8 --------
 include/configs/MPC8569MDS.h       |    8 --------
 include/configs/MPC8572DS.h        |    8 --------
 include/configs/MPC8610HPCD.h      |    8 --------
 include/configs/MPC8641HPCN.h      |    8 --------
 include/configs/MUSENKI.h          |    8 --------
 include/configs/MVBC_P.h           |    3 ---
 include/configs/MVBLM7.h           |    9 ---------
 include/configs/MVBLUE.h           |    9 ---------
 include/configs/MVS1.h             |    9 ---------
 include/configs/MVSMR.h            |    3 ---
 include/configs/NC650.h            |    8 --------
 include/configs/NETPHONE.h         |    8 --------
 include/configs/NETTA.h            |    8 --------
 include/configs/NETTA2.h           |    8 --------
 include/configs/NETVIA.h           |    8 --------
 include/configs/NSCU.h             |    9 ---------
 include/configs/NX823.h            |    9 ---------
 include/configs/OCRTC.h            |    9 ---------
 include/configs/ORSG.h             |    9 ---------
 include/configs/OXC.h              |    9 ---------
 include/configs/P1022DS.h          |    8 --------
 include/configs/P1_P2_RDB.h        |    8 --------
 include/configs/P2020DS.h          |    8 --------
 include/configs/P3G4.h             |    8 --------
 include/configs/PATI.h             |   10 ----------
 include/configs/PCI405.h           |    8 --------
 include/configs/PCIPPC2.h          |    8 --------
 include/configs/PCIPPC6.h          |    8 --------
 include/configs/PIP405.h           |    9 ---------
 include/configs/PLU405.h           |    8 --------
 include/configs/PM520.h            |    3 ---
 include/configs/PM826.h            |    9 ---------
 include/configs/PM828.h            |    9 ---------
 include/configs/PM854.h            |    8 --------
 include/configs/PM856.h            |    8 --------
 include/configs/PMC405.h           |    8 --------
 include/configs/PMC440.h           |    8 --------
 include/configs/PN62.h             |   10 ----------
 include/configs/PPChameleonEVB.h   |    9 ---------
 include/configs/QS823.h            |    8 --------
 include/configs/QS850.h            |    8 --------
 include/configs/QS860T.h           |    9 ---------
 include/configs/R360MPI.h          |    9 ---------
 include/configs/RBC823.h           |    9 ---------
 include/configs/RPXClassic.h       |    9 ---------
 include/configs/RPXlite.h          |    9 ---------
 include/configs/RPXlite_DW.h       |    8 --------
 include/configs/RPXsuper.h         |    8 --------
 include/configs/RRvision.h         |    8 --------
 include/configs/Rattler.h          |    3 ---
 include/configs/SBC8540.h          |    8 --------
 include/configs/SCM.h              |    9 ---------
 include/configs/SIMPC8313.h        |    8 --------
 include/configs/SM850.h            |    9 ---------
 include/configs/SPD823TS.h         |    8 --------
 include/configs/SXNI855T.h         |    7 -------
 include/configs/Sandpoint8240.h    |   10 ----------
 include/configs/Sandpoint8245.h    |   10 ----------
 include/configs/TB5200.h           |    3 ---
 include/configs/TK885D.h           |    8 --------
 include/configs/TOP5200.h          |    3 ---
 include/configs/TOP860.h           |    8 --------
 include/configs/TQM5200.h          |    3 ---
 include/configs/TQM823L.h          |    9 ---------
 include/configs/TQM823M.h          |    9 ---------
 include/configs/TQM8260.h          |    9 ---------
 include/configs/TQM8272.h          |    8 --------
 include/configs/TQM834x.h          |    8 --------
 include/configs/TQM850L.h          |    9 ---------
 include/configs/TQM850M.h          |    9 ---------
 include/configs/TQM855L.h          |    9 ---------
 include/configs/TQM855M.h          |    9 ---------
 include/configs/TQM85xx.h          |    8 --------
 include/configs/TQM860L.h          |    9 ---------
 include/configs/TQM860M.h          |    8 --------
 include/configs/TQM862L.h          |    9 ---------
 include/configs/TQM862M.h          |    9 ---------
 include/configs/TQM866M.h          |    8 --------
 include/configs/TQM885D.h          |    8 --------
 include/configs/Total5200.h        |    3 ---
 include/configs/VOH405.h           |    8 --------
 include/configs/VOM405.h           |    8 --------
 include/configs/VoVPN-GW.h         |    4 ----
 include/configs/W7OLMC.h           |    9 ---------
 include/configs/W7OLMG.h           |    9 ---------
 include/configs/WUH405.h           |    8 --------
 include/configs/XPEDITE1000.h      |    6 ------
 include/configs/XPEDITE5170.h      |    6 ------
 include/configs/XPEDITE5200.h      |    6 ------
 include/configs/XPEDITE5370.h      |    6 ------
 include/configs/Yukon8220.h        |    3 ---
 include/configs/ZPC1900.h          |    3 ---
 include/configs/ZUMA.h             |    8 --------
 include/configs/aev.h              |    3 ---
 include/configs/alpr.h             |    8 --------
 include/configs/aria.h             |    8 --------
 include/configs/atc.h              |    8 --------
 include/configs/barco.h            |    9 ---------
 include/configs/c2mon.h            |    9 ---------
 include/configs/canmb.h            |    3 ---
 include/configs/cm5200.h           |    3 ---
 include/configs/cmi_mpc5xx.h       |    9 ---------
 include/configs/cogent_mpc8260.h   |    9 ---------
 include/configs/cogent_mpc8xx.h    |    9 ---------
 include/configs/corenet_ds.h       |    8 --------
 include/configs/cpci5200.h         |    3 ---
 include/configs/csb272.h           |    9 ---------
 include/configs/csb472.h           |    9 ---------
 include/configs/debris.h           |   10 ----------
 include/configs/digsy_mtc.h        |    3 ---
 include/configs/eXalion.h          |   10 ----------
 include/configs/ep8248.h           |    3 ---
 include/configs/ep8260.h           |    8 --------
 include/configs/ep82xxm.h          |    3 ---
 include/configs/galaxy5200.h       |    2 --
 include/configs/gw8260.h           |    9 ---------
 include/configs/hermes.h           |    9 ---------
 include/configs/hmi1001.h          |    3 ---
 include/configs/hymod.h            |    8 --------
 include/configs/inka4x0.h          |    3 ---
 include/configs/ipek01.h           |    3 ---
 include/configs/jupiter.h          |    3 ---
 include/configs/km8xx.h            |    8 --------
 include/configs/kmeter1.h          |    8 --------
 include/configs/korat.h            |    8 --------
 include/configs/kvme080.h          |    3 ---
 include/configs/linkstation.h      |    8 --------
 include/configs/lwmon.h            |    8 --------
 include/configs/lwmon5.h           |    8 --------
 include/configs/manroland/common.h |    3 ---
 include/configs/mcc200.h           |    3 ---
 include/configs/mecp5123.h         |    8 --------
 include/configs/mecp5200.h         |    3 ---
 include/configs/mgcoge.h           |    3 ---
 include/configs/motionpro.h        |    3 ---
 include/configs/mpc5121ads.h       |    8 --------
 include/configs/mpc7448hpc2.h      |    8 --------
 include/configs/muas3001.h         |    3 ---
 include/configs/munices.h          |    2 --
 include/configs/o2dnt.h            |    3 ---
 include/configs/p3mx.h             |    8 --------
 include/configs/p3p440.h           |    8 --------
 include/configs/pcm030.h           |    2 --
 include/configs/pcs440ep.h         |    8 --------
 include/configs/pcu_e.h            |    8 --------
 include/configs/pdm360ng.h         |    8 --------
 include/configs/pf5200.h           |    3 ---
 include/configs/ppmc7xx.h          |   12 ------------
 include/configs/ppmc8260.h         |    9 ---------
 include/configs/quantum.h          |    8 --------
 include/configs/rmu.h              |    8 --------
 include/configs/rsdproto.h         |    8 --------
 include/configs/sacsng.h           |    8 --------
 include/configs/sbc405.h           |    8 --------
 include/configs/sbc8240.h          |    8 --------
 include/configs/sbc8260.h          |    9 ---------
 include/configs/sbc8349.h          |    8 --------
 include/configs/sbc8548.h          |    8 --------
 include/configs/sbc8560.h          |    8 --------
 include/configs/sbc8641d.h         |    8 --------
 include/configs/sc3.h              |    8 --------
 include/configs/smmaco4.h          |    3 ---
 include/configs/socrates.h         |    8 --------
 include/configs/sorcery.h          |    3 ---
 include/configs/spc1920.h          |    8 --------
 include/configs/spieval.h          |    3 ---
 include/configs/stxgp3.h           |    8 --------
 include/configs/stxssa.h           |    8 --------
 include/configs/stxxtc.h           |    8 --------
 include/configs/svm_sc8xx.h        |    9 ---------
 include/configs/uc100.h            |    8 --------
 include/configs/utx8245.h          |    9 ---------
 include/configs/v37.h              |    8 --------
 include/configs/v38b.h             |    3 ---
 include/configs/ve8313.h           |    8 --------
 include/configs/virtlab2.h         |    9 ---------
 include/configs/vme8349.h          |    8 --------
 include/configs/zeus.h             |    8 --------
 288 files changed, 15 insertions(+), 2099 deletions(-)

diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S
index a36af5a..bbf894b 100644
--- a/arch/powerpc/cpu/74xx_7xx/start.S
+++ b/arch/powerpc/cpu/74xx_7xx/start.S
@@ -42,6 +42,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #if !defined(CONFIG_DB64360) && \
     !defined(CONFIG_DB64460) && \
diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S
index d26b617..7a3c263 100644
--- a/arch/powerpc/cpu/mpc512x/start.S
+++ b/arch/powerpc/cpu/mpc512x/start.S
@@ -43,6 +43,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING "MPC512X"
diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S
index 0af879e..c0b98b2 100644
--- a/arch/powerpc/cpu/mpc5xx/start.S
+++ b/arch/powerpc/cpu/mpc5xx/start.S
@@ -43,6 +43,7 @@
 
 #include <linux/config.h>
 #include <asm/processor.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 8b9f09b..d1fa5bd 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -38,6 +38,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
index 3d79d8e..432ae24 100644
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ b/arch/powerpc/cpu/mpc8220/start.S
@@ -37,6 +37,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef	 CONFIG_IDENT_STRING
 #define	 CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
index f3f595a..3cf0135 100644
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ b/arch/powerpc/cpu/mpc824x/start.S
@@ -49,6 +49,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef CONFIG_IDENT_STRING
 #define CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index a435042..d4bd123 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -38,6 +38,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index c7d85a8..d6ac100 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -40,6 +40,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING "MPC83XX"
diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S
index ed1e4ca..3ac571b 100644
--- a/arch/powerpc/cpu/mpc86xx/start.S
+++ b/arch/powerpc/cpu/mpc86xx/start.S
@@ -40,6 +40,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef	CONFIG_IDENT_STRING
 #define CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
index 7cf602f..4748254 100644
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ b/arch/powerpc/cpu/mpc8xx/start.S
@@ -50,6 +50,7 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/u-boot.h>
 
 #ifndef  CONFIG_IDENT_STRING
 #define  CONFIG_IDENT_STRING ""
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index ea2d22d..814dc33 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -143,4 +143,9 @@ typedef struct bd_info {
 } bd_t;
 
 #endif /* __ASSEMBLY__ */
+
+/* bi_bootflags values */
+#define BOOTFLAG_COLD	0x1	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x2	/* Software reboot */
+
 #endif	/* __U_BOOT_H__ */
diff --git a/board/fads/fads.h b/board/fads/fads.h
index 4ab4b26..2b59d5f 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -351,14 +351,6 @@
 #define CONFIG_SYS_OR1_PRELIM	0xFFFF8110		/* 64Kbyte address space */
 #define CONFIG_SYS_BR1_PRELIM	((BCSR_ADDR) | BR_V)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* values according to the manual */
 
 #define	BCSR0			((uint) (BCSR_ADDR + 0x00))
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index 6d8870c..4657835 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -310,12 +310,4 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index d8303f3..e8f3fc8 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -200,13 +200,4 @@
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0xFFE00000	/* FLASH bank #1	*/
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
index 6e2907e..10131b7 100644
--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -297,12 +297,4 @@
 #define CONFIG_SYS_OR6_PRELIM	0xFFFF8000	/* 32kB, 15 waits, cs after addr, no bursts */
 #define CONFIG_SYS_BR6_PRELIM	0x60000401	/* use GPCM for CS generation, 8 bit port */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index ae0a873..15dee48 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -219,14 +219,6 @@
  */
 #define SPD_EEPROM_ADDRESS	0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 20849bc..c2f8983 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -428,14 +428,6 @@ extern int flash_banks;
 #endif
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
-/*
  * PCI OHCI controller
  */
 #define CONFIG_USB_OHCI_NEW	1
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 45c64c2..9776410 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -263,12 +263,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 4cb8052..49e4a77 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -346,14 +346,6 @@
 #define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index c133033..3e5399b 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -379,14 +379,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index e4d30a1..2b3aa15 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -207,14 +207,6 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 576aa74..253539c 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -38,9 +38,6 @@
 #define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
-
 /*
  * Serial console configuration
  */
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index 4d83786..9cc5e33 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -465,15 +465,6 @@ extern  unsigned long           bab7xx_get_gclk_freq (void);
 
 #define CONFIG_SYS_L2_BAB7xx
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot */
-
-
 #define CONFIG_NET_MULTI                /* Multi ethernet cards support */
 #define CONFIG_TULIP
 #define CONFIG_TULIP_SELECT_MEDIA
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 44befe9..2c6ee8f 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -58,9 +58,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running@33.000000MHz	    */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot		    */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported		    */
 
 /*
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 98f6396..53a38fb 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -300,13 +300,4 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot		    */
-
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 115a6f9..cf34b43 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -220,13 +220,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 229a513..2409ad3 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -544,15 +544,6 @@
 #define CONFIG_SYS_GPIO0_TSRL		0x00000000
 #define CONFIG_SYS_GPIO0_TCR		0xF7FF8014
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 #define CONFIG_NO_SERIAL_EEPROM
 
 /*--------------------------------------------------------------------*/
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index 3f4a2c1..e00313b 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -476,13 +476,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 2b6786b..60b1d98 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -313,14 +313,6 @@
 #define CONFIG_SYS_PLD_RESET		(0x80000000 >> 12)   /* GPIO12 */
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 91d262a..99b85d5 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -338,15 +338,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 #define SRAM_BASE		0x80000000	/* SRAM base address	*/
 #define SRAM_END		0x801FFFFF
 
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 9221211..225cac2 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -265,12 +265,4 @@
 #define CONFIG_SYS_PB_LED		(0x80000000 >> 16)   /* GPIO16 */
 #define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 23)   /* GPIO23 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 3e7020d..55ccdc2 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -332,13 +332,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index d3000f6..5668655 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -393,13 +393,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index d376344..c1e79f8 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -385,13 +385,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 07acab0..3f1354f 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -388,12 +388,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index f2d51f7..d4f2540 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -616,14 +616,6 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #define CPCI750_SLAVE_TEST	(((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 5b50bcf..3fd2442 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -246,12 +246,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 6d76d9f..fea7ba4 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -333,15 +333,6 @@
 #define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 83b010c..4b9b8e6 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -354,15 +354,6 @@
 #define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot		   */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 9ab30ec..d6cce54 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -235,12 +235,4 @@
 #define EEPROM_WRITE_ADDRESS 0xA0
 #define EEPROM_READ_ADDRESS  0xA1
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 4a3f2bc..894ecf1 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -290,14 +290,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 21230e1..bb286eb 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -190,13 +190,4 @@
 
 #define FLASH_BASE0_PRELIM	0xFFE00000	/* FLASH bank #0	*/
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index 910933a..c30537a 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -593,14 +593,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index 765eaaf..a7d7cab 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -531,14 +531,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 4423f2a..5b9db8e 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -252,14 +252,6 @@
 #define CONFIG_SYS_GPIO0_TCR		0xB7FE0014  /*	0 ... 31 */
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 8f1fc78..5a3ebff 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -304,13 +304,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 830466f..4f2ae49 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -416,14 +416,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
 				 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 84d27b6..22f6377 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -347,14 +347,6 @@
 #endif
 #define L2_ENABLE   (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot */
-
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index 0f56302..17fb520 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -386,17 +386,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *-----------------------------------------------------------------------
- *
- */
-
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		 /* Software reboot		     */
-
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index e1c6096..9a07b98 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -205,12 +205,4 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index e07f9a1..10bbda5 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -355,14 +355,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h
index 11a862e..eee9480 100644
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -310,22 +310,4 @@
 #define CONFIG_SYS_MAMR_8COL	0x18803112
 #define CONFIG_SYS_MAMR_9COL	0x18803112	/* same as 8 column because its just easier to port with*/
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
index c36f2bb..a490ed7 100644
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -355,13 +355,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_1X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index 0903536..5b592f1 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -419,14 +419,6 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 4d08243..9c6d99b 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -205,14 +205,6 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index cb75960..03e41ab 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -340,14 +340,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CONFIG_SYS_MAMR		0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD			0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM			0x02		/* Software reboot			*/
 
 /* values according to the manual */
 
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 84187fb..989066f 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -295,14 +295,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR		0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD			0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM			0x02		/* Software reboot			*/
-
 
 /* values according to the manual */
 
diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index 0f4277c..07651e6 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -312,12 +312,4 @@
 #define CONFIG_SYS_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS)
 #define CONFIG_SYS_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V )
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index addca2f..7c21149 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -428,15 +428,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index ec9000d..0b7853f 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -428,15 +428,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 
 /* pass open firmware flat tree */
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index d2883eb..9b2bd9c 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -376,14 +376,6 @@
 #define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 12f879a..a44ae66 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -725,12 +725,6 @@
 						)
 
 /*
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot					*/
-
-/*
  * FEC interrupt assignment
  */
 #define FEC_INTERRUPT   SIU_LEVEL1
diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
index fadd830..e2207ac 100644
--- a/include/configs/GENIETV.h
+++ b/include/configs/GENIETV.h
@@ -331,14 +331,6 @@
 			MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \
 			| MAMR_TLFA_4X)	/* 0x5d802114 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD			0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM			0x02		/* Software reboot			*/
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ		1
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 01e0bc6..15203e4 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -476,14 +476,6 @@
 #define CONFIG_SYS_LCD1_RST		(0x80000000 >> 31)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index 251fe67..d03cf9b 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -376,14 +376,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /* values according to the manual */
 #define CONFIG_DRAM_50MHZ	1
 #define CONFIG_SDRAM_50MHZ
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index 2747d8c..b65c23c 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -487,15 +487,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 8c6d5ed..4e47c48 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -349,14 +349,6 @@
 #define CONFIG_SYS_UART5_RS232         (0x80000000 >> 8)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index ea1e706..a2743f2 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -370,15 +370,6 @@
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #ifdef CONFIG_MPC860T
 
 /* Interrupt level assignments.
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index 917135e..4a2e776 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -447,15 +447,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CONFIG_SYS_MAMR		0x13a01114
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #ifdef CONFIG_MPC860T
 
 /* Interrupt level assignments.
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 71bb7b4..55a3ca7 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -310,15 +310,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index be63ea5..681a071 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -453,18 +453,4 @@ typedef	struct ip860_bcsr_s {
 #define BD_CTRL_FLWE	0x20	/* Flash Write Enable			*/
 #define BD_CTRL_RWDN	0x10	/* VMEBus Requester Release When Done Enable */
 
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 3cb6cf7..cbc25e6 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -250,15 +250,6 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	  /* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	  /* Software reboot			*/
-
-
-/*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32     /* For MPC8260 CPU		*/
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index c0b1d86..b25a8d9 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -235,14 +235,6 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-/*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 1a4924e..f50fd9c 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -473,13 +473,4 @@
 			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 256cabd..b5774d6 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -456,13 +456,4 @@
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5d3a744..de13810 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -35,9 +35,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 98f5661..5a528d3 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -295,15 +295,6 @@
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR	0xF0000500
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 49a7378..a9ebc08 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -284,14 +284,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
 #define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 14d412d..4c6ef63 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -495,15 +495,6 @@
 
 #define LATCH_ADDR 0x90000200
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 #define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot */
 #define CONFIG_AUTOBOOT_STOP_STR	"."
 #define CONFIG_SILENT_CONSOLE		1
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index ab535e1..11bd245 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -446,15 +446,6 @@
 
 #define LATCH_ADDR 0x90000200
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 #define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot	*/
 
 #define CONFIG_AUTOBOOT_STOP_STR	"."	/* easy to stop for now		*/
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 6e8a4b8..0a06aa1 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -340,14 +340,6 @@
 			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * JFFS2 partitions
  *
  */
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index 5f7c7a8..32a953e 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -310,12 +310,4 @@
  */
 #define CONFIG_SYS_DER 0
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h
index afe2383..6a9991c 100644
--- a/include/configs/MBX860T.h
+++ b/include/configs/MBX860T.h
@@ -282,14 +282,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 #define CONFIG_SYS_MAMR		0x13821000
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD			0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM			0x02		/* Software reboot			*/
-
 
 /* values according to the manual */
 
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index e7429dd..00951c5 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -349,14 +349,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
 #define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 19a288c..96785e1 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -386,12 +386,4 @@
  */
 #define CONFIG_SYS_DER 0
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 7e6484e..c05de54 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -313,15 +313,6 @@
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index 5fcc173..28b06ef 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -231,14 +231,6 @@
  */
 #define SPD_EEPROM_ADDRESS      0x50
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index 986590a..17dc493 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -312,15 +312,6 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE  16
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot                  */
-
 /* Localizations */
 #if 0
 #define CONFIG_ETHADDR          0:0:0:0:1:d
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index ffd37fd..9c7466a 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -373,9 +373,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot	     */
-
 #define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 55d77f8..dd7ca12 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -419,9 +419,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6 0
 #define CONFIG_SYS_HRCW_SLAVE7 0
 
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot	     */
-
 #define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 6cd5da7..84ad7d9 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -491,14 +491,6 @@
 #define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
-/*
  * Environment Configuration
  */
 
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 524afa5..86f39bd 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -570,14 +570,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index f1b110b..51f8efd 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -598,14 +598,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 9a296a1..4084e3b 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -508,14 +508,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 68ff191..4391c8d 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -527,14 +527,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 73dbea4..5689c4f 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -668,14 +668,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 9be571f..aa4aa45 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -661,14 +661,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index c58e003..0a0bd1f 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -568,14 +568,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 9fa577d..82edb26 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -485,14 +485,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 9092755..fb1eefb 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -619,14 +619,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 79dadc4..39f9af6 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -628,14 +628,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 2a3c058..e2891ed 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -708,14 +708,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 577c276..994d566 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -421,14 +421,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 7daf934..60ed720 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -331,14 +331,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 8797b30..4e67923 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -437,14 +437,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d1ac32f..53cb6b2 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -452,14 +452,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 33f49f5..a61343a 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -492,14 +492,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 0f71f11..dfc26df 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -435,14 +435,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 31740fd..12b2f12 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -461,14 +461,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 2dc2932..4c80af4 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -452,14 +452,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 8177db3..b3c7a34 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -585,14 +585,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)
 					/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 081661e..05d04d3 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -602,14 +602,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 4d9606e..a004f30 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -517,14 +517,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 974cb6b..78ed47e 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -675,14 +675,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
     #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index ec9e1ec..b8b89d7 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -293,12 +293,4 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index 8f6b16b..b8d3993 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -34,9 +34,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000
 
-#define BOOTFLAG_COLD		0x01
-#define BOOTFLAG_WARM		0x02
-
 #define CONFIG_MISC_INIT_R	1
 
 #define CONFIG_SYS_CACHELINE_SIZE	32
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index c28eb64..303c112 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -380,15 +380,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 669816c..e9ac4a0 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -340,13 +340,4 @@
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
index 10210f0..9bf7fcb 100644
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -406,13 +406,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h
index 6492068..528e247 100644
--- a/include/configs/MVSMR.h
+++ b/include/configs/MVSMR.h
@@ -34,9 +34,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000
 
-#define BOOTFLAG_COLD		0x01
-#define BOOTFLAG_WARM		0x02
-
 #define CONFIG_MISC_INIT_R	1
 
 #define CONFIG_SYS_CACHELINE_SIZE	32
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 6343cfe..c82dfe6 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -424,14 +424,6 @@
 
 #define CONFIG_SYS_MBMR_NAND ( MBMR_WLFB_5X )
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
 #define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
 
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 76ca916..d618312 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -478,14 +478,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 4f9f9fe..dc16fda 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -487,14 +487,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /***********************************************************************************************************
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index d060cb7..eadde26 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -479,14 +479,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index a18b480..49a0309 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -346,14 +346,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* Ethernet@SCC2 */
 #define CONFIG_SCC2_ENET
 
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 6a4c47d..391cf81 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -474,15 +474,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #undef CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 5054d5e..6683ac8 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -356,15 +356,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot	    */
-
 #define CONFIG_ENV_OVERWRITE	/* allow changes to ethaddr (for now)	*/
 #define CONFIG_ETHADDR		00:10:20:30:40:50
 #define CONFIG_IPADDR		10.77.77.20
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 55471af..bb54e5e 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -294,13 +294,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 1424713..c7d627a 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -292,13 +292,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 74c51f4..36ccde0 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -314,13 +314,4 @@
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index dcaca2b..5907f51 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -387,14 +387,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 7e901e1..33afeae 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -539,14 +539,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 79ce2c0..af07647 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -606,14 +606,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 890170d..0508e62 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -421,14 +421,6 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 88e9528..12483a0 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -283,16 +283,6 @@
  */
 #define CONFIG_SYS_DER			0x00000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01			/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02			/* Software reboot			*/
-
-
 #define VERSION_TAG "released"
 #define CONFIG_ISO_STRING "MEV-10084-001"
 
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 0d443ea..348654f 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -305,12 +305,4 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index c30ac78..05d152d 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -238,14 +238,6 @@
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index bc67480..1c28e80 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -240,14 +240,6 @@
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
   RTC m48t59
 */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 3e57c0b..be7e19c 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -254,15 +254,6 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index f917eb5..c296ab4 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -391,14 +391,6 @@
 #define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 0)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in MHz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 22de207..ce73e40 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -37,9 +37,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 636bd26..4842416 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -318,15 +318,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 9d620af..d23affd 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -312,15 +312,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot		   */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 7426bca..9f9b5df 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -366,14 +366,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 0bd28fc..1850a57 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -365,14 +365,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 00a12fb..e0e3f47 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -328,14 +328,6 @@
 					 CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 3c19f52..dd04ec4 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -503,14 +503,6 @@
 #define CONFIG_SYS_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
 #define CONFIG_SYS_NAND_QUIET_TEST	1
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM	0x02	/* Software reboot                      */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 562c5c3..f32322f 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -301,14 +301,4 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 44f03dc..777a10a 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -551,15 +551,6 @@
 #define CONFIG_SYS_GPIO0_TSRL		0x00000000
 #define CONFIG_SYS_GPIO0_TCR		0xF7FF8014
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 #define CONFIG_NO_SERIAL_EEPROM
 
 /*--------------------------------------------------------------------*/
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index c1416cb..e938e68 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -563,14 +563,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 #define CONFIG_SYS_BR7_PRELIM		0xF0700000
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
-/*
  * Sanity checks
  */
 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index de74fee..0b1c299 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -563,14 +563,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 #define CONFIG_SYS_BR7_PRELIM		0xF0700000
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
-/*
  * Sanity checks
  */
 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 705d375..5f2f668 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -400,15 +400,6 @@ CONFIG_SPI
 /* #define CONFIG_SYS_OR7		0xFF000000 */
 /* #define CONFIG_SYS_BR7		0xE8000000 */
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 /*
  * Sanity checks
  */
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 830f4bc..ddc1232 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -475,13 +475,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 00ac6cf..29ac234 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -406,15 +406,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /*
  * JFFS2 partitions
  *
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index bec5278..06ff979 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -442,15 +442,6 @@
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index dd9134d..6013378 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -335,15 +335,6 @@
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index a59053c..dd6429c 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -414,14 +414,6 @@
 			MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
 /* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 /* Configuration variable added by yooth. */
 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index da962f3..84aa7e2 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -504,12 +504,4 @@
 			   ORxG_SCY_5_CLK              |\
 			   ORxG_TRLX)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot                   */
-
 #endif  /* __CONFIG_H */
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 6ec5be0..e75d32f 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -468,12 +468,4 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index e630afe..4d3ecf2 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -262,9 +262,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6		0
 #define CONFIG_SYS_HRCW_SLAVE7		0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 5d424dd..32110de 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -421,14 +421,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index c6fb074..48375bd 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -342,15 +342,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 70b7489..efd0a89 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -477,14 +477,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 56f03e2..e8c10ec 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -363,15 +363,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index fa77882..63a7137 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -417,12 +417,4 @@
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 8ee8cbf..7db9d1b 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -372,13 +372,6 @@
 #define DUART_BR5_VALUE ((CONFIG_SYS_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 #define DUART_BR6_VALUE ((CONFIG_SYS_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 
-/**********************************************************
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_RESET_ON_PANIC		/* reset if system panic() */
 
 #define CONFIG_ENV_IS_IN_FLASH
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 125b9a2..91b961f 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -400,16 +400,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ	1
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 8cb920e..290969e 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -378,16 +378,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ	1
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6da18eb..6afeb1f 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -39,9 +39,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 7cefa32..fd1fc02 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -484,14 +484,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Network configuration
  */
 #define CONFIG_FEC_ENET			/* enable ethernet on FEC */
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 50197f4..4ef5265 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -47,9 +47,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index b9e450d..1d73474 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -246,14 +246,6 @@
 */
 #define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
  * Debug Enable Register
  *-----------------------------------------------------------------------
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 107bff1..8d4eca3 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -44,9 +44,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
 
 /*
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 372c76d..13b9f93 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -481,15 +481,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 64c9707..219ad49 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -477,15 +477,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 582e670..c51fd19 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -379,15 +379,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 12a7eda..7d6fb58 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -502,14 +502,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index c1e0e64..8c84ddc 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -463,14 +463,6 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index bf6ecce..0050feb 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -466,15 +466,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 7442452..5cc815f 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -466,15 +466,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 5bf8f02..4932418 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -470,15 +470,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC"
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 456ed7e..1039ceb 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -505,15 +505,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC"
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index abbaf38..02b6ac3 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -624,14 +624,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 94b9a3b..26e61c1 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -469,15 +469,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC"
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index ce5e691..b7fe824 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -474,14 +474,6 @@
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC"
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index d77df9c..e10270b 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -474,15 +474,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index a6c465b..49b1c83 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -475,15 +475,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 9ec815c..c4d0874 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -496,14 +496,6 @@
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC"
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index c715c07..07a0d91 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -482,14 +482,6 @@
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Network configuration
  */
 #define CONFIG_SCC2_ENET		/* enable ethernet on SCC2 */
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 7510ab1..a26fb97 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -46,9 +46,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running@33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 9c91fcc..12f8631 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -404,14 +404,6 @@
 #define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 0)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 871e4c3..b9c90d0 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -282,14 +282,6 @@
 #define CONFIG_SYS_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 3614184..e2ebe20 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -313,10 +313,6 @@
 #define CONFIG_SYS_MONITOR_LEN			0x00020000
 #define CONFIG_SYS_MALLOC_LEN			0x00020000
 
-/* boot flags */
-#define BOOTFLAG_COLD			0x01	/* normal power-on */
-#define BOOTFLAG_WARM			0x02	/* software reboot */
-
 /* cache configuration */
 #define CONFIG_SYS_CACHELINE_SIZE		32      /* for MPC8260 */
 #if defined(CONFIG_CMD_KGDB)
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index f06bfe5..422411c 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -310,15 +310,6 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index be8c9f8..c4c202c 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -313,15 +313,6 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index be9ac62..53ece95 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -343,14 +343,6 @@
 #define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */
diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h
index cf39aea..95cb5df 100644
--- a/include/configs/XPEDITE1000.h
+++ b/include/configs/XPEDITE1000.h
@@ -243,12 +243,6 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index 634b662..8a307ac 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -575,12 +575,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */
 
 /*
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02		/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index a23e7c5..23bf035 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -370,12 +370,6 @@
 #define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */
 
 /*
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02		/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 9ed4ffa..be6a796 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */
 
 /*
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02		/* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index c439068..c441fa2 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -38,9 +38,6 @@
 #define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
-
 /*
  * Serial console configuration
  */
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 8ae765c..796a9bd 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -212,9 +212,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6		0
 #define CONFIG_SYS_HRCW_SLAVE7		0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index fcc47a9..8cdf890 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -387,12 +387,4 @@
  */
 #define CONFIG_GT_I2C
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 98958a6..0d2a7ff 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -43,9 +43,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 /*
  * Serial console configuration
  */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index ee0c14d..359fd0f 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -359,14 +359,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index c5f9cc1..ffe0929 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -526,14 +526,6 @@
 
 #define CONFIG_HIGH_BATS		1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD			0x01
-#define BOOTFLAG_WARM			0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 24015b7..620fdb4 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -280,14 +280,6 @@
 #define CONFIG_ENV_SIZE		2048
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4	/* 16-byte page size	*/
 #endif
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot                 */
-
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/barco.h b/include/configs/barco.h
index e00f84a..55f1b9f 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -351,15 +351,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ	1
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
index 4508d75..3bd8164 100644
--- a/include/configs/c2mon.h
+++ b/include/configs/c2mon.h
@@ -417,13 +417,4 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 1f275e5..07d7d0e 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -35,9 +35,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 72cf941..9f026e9 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -317,9 +317,6 @@
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #define CONFIG_SYS_XLB_PIPELINING	1	/* enable transaction pipeling */
 
 /*
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index c3c603b..f3068a9 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -267,13 +267,4 @@
  */
 #define CONFIG_SYS_DER			0x00000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01			/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02			/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 566565a..d5648d6 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -407,13 +407,4 @@
 #endif
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index 750c0df..5b94a3d 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -364,13 +364,4 @@
 #define CONFIG_SYS_OR3_PRELIM	((~(CONFIG_SYS_CMA_CS3_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SETA)
 
 #endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index dd609da..0e74ba4 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -579,14 +579,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index f7290d6..b4d641d 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -47,9 +47,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported 	  */
 
 /*
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 9ded330..5063713 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -297,13 +297,4 @@
 #define CONFIG_SYS_I2C_PLL_ADDR	0x58	/* I2C address of AMIS FS6377-01 PLL */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 71eb083..415e2e5 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -295,13 +295,4 @@
  */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/debris.h b/include/configs/debris.h
index dc59df9..7cd58b2 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -451,16 +451,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 /* values according to the manual */
 
 #define CONFIG_DRAM_50MHZ	1
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 7a1a7c3..5c0de7a 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -42,9 +42,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000
 
-#define BOOTFLAG_COLD		0x01
-#define BOOTFLAG_WARM		0x02
-
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
 /*
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 85bf236..6f9b655 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -412,16 +412,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 /* values according to the manual */
 #define CONFIG_DRAM_50MHZ	1
 #define CONFIG_SDRAM_50MHZ
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index a738425..4a99ca6 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -232,9 +232,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6		0
 #define CONFIG_SYS_HRCW_SLAVE7		0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 3f4425a..ecc8a09 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -746,14 +746,6 @@
 #endif
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot                   */
-
-/*
  * JFFS2 partitions
  *
  */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index b52b941..83b57c5 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -361,9 +361,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6		0
 #define CONFIG_SYS_HRCW_SLAVE7		0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 29951f7..b802dca 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -42,8 +42,6 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333	/* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
 
 /*
  * Serial console configuration
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 9ed3846..5f64b93 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -819,13 +819,4 @@
 			    ORxG_SCY_11_CLK            |\
 			    ORxG_EHTR)
 #endif /* CONFIG_SYS_IO_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot           */
-
 #endif  /* __CONFIG_H */
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index 0df46fa..818bfd2 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -332,13 +332,4 @@
 #define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index f9cdcbc..ac7ef06 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -35,9 +35,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 5a282ff..0591c51 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -728,14 +728,6 @@
 #define FPGA_MAIN_IRQ		SIU_INT_IRQ2
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
-/*
  * JFFS2 partitions
  *
  */
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c5b1565..7b28cba 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -38,9 +38,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_MISC_INIT_F	1	/* Use misc_init_f()			*/
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index 6903b36..66338bf 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -41,9 +41,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32 /* For MPC5xxx CPUs */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CACHELINE_SHIFT	5  /* log base 2 of the above value */
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 9c45acf..32bd4ee 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -38,9 +38,6 @@
 #define CONFIG_BOARD_EARLY_INIT_R	1
 #define CONFIG_BOARD_EARLY_INIT_F	1
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h
index a10744e..2a42e99 100644
--- a/include/configs/km8xx.h
+++ b/include/configs/km8xx.h
@@ -271,14 +271,6 @@
 #define CONFIG_SYS_BR3_PRELIM	(0x30000401)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		    */
-
 #define CONFIG_SCC3_ENET
 #define CONFIG_ETHPRIME		"SCC"
 #define CONFIG_HAS_ETH0
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index f7d36b1..9ef4b82 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -441,14 +441,6 @@
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02 /* Software reboot */
-
 #define BOOTFLASH_START	F0000000
 
 #define CONFIG_PRAM	512	/* protected RAM [KBytes] */
diff --git a/include/configs/korat.h b/include/configs/korat.h
index f95df68..3c0b4bd 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -553,14 +553,6 @@
 }											\
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 0d95263..b406c11 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -268,7 +268,4 @@
 #define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
 #define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
-#define BOOTFLAG_COLD	0x01
-#define BOOTFLAG_WARM	0x02
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 6883e79..7c3eb64 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -495,12 +495,4 @@
  */
 #define CONFIG_DOS_PARTITION
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index be20d72..8f31f38 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -610,12 +610,4 @@
  */
 #define CONFIG_SYS_MAR		0x00000088
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 6461124..b3a951b 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -608,14 +608,6 @@
 }											\
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h
index 0224608..01323c1 100644
--- a/include/configs/manroland/common.h
+++ b/include/configs/manroland/common.h
@@ -29,9 +29,6 @@
  * (easy to change)
  */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* Partitions */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 7ef6385..0e9f346 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,9 +37,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported			*/
 
 /*
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 92c4f5f..e7f9db1 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -362,14 +362,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 73405ea..846a51a 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -47,9 +47,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 55d1fc9..9152d2b 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -193,9 +193,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6		0
 #define CONFIG_SYS_HRCW_SLAVE7		0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index fa4310b..dff77a0 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -411,9 +411,6 @@ extern void __led_set(led_id_t id, int state);
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 
 
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 5281042..3783b6b 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -495,14 +495,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 497ea42..328356f 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -399,13 +399,5 @@
 
 #define L2_INIT		0
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
 #define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 #endif	/* __CONFIG_H */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 43f46bf..7f184ae 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -275,9 +275,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6 	0
 #define CONFIG_SYS_HRCW_SLAVE7 	0
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/munices.h b/include/configs/munices.h
index fa5230f..270f608 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -32,8 +32,6 @@
 #define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
 #define CONFIG_MUNICES		1	/* ... on MUNICes board */
 #define CONFIG_SYS_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index bdc0f79..a30529b 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -34,9 +34,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running@33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 17ec08f..323808e 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -447,12 +447,4 @@
 
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		    */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index d6b9207..07155ce 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -313,14 +313,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index 8acf3c7..651eabf 100644
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -42,8 +42,6 @@ High Level Configuration Options
 #define CONFIG_PHYCORE_MPC5200B_TINY 1	/* phyCORE-MPC5200B -> */
 					/* FEC configuration and IDE */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
 
 /*-----------------------------------------------------------------------------
 Serial console configuration
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 1f744b8..1f03337 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -441,14 +441,6 @@
 }											\
 }
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 3aee206..4d18583 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -539,12 +539,4 @@
 			  MAMR_WLFA_1X		| \
 			  MAMR_TLFA_8X		)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 718abdf..dd71c7a 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -432,14 +432,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 80a0bc6..d3f78d6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -46,9 +46,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 /*
  * Serial console configuration
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 04779c4..646f4e4 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -414,16 +414,4 @@
 
 #define CONFIG_SYS_BOARD_ASM_INIT
 
-
-/*
- * Boot flags
- *
- * BOOTFLAG_COLD		- Indicates a power-on boot
- * BOOTFLAG_WARM		- Indicates a software reset
- */
-
-#define BOOTFLAG_COLD		0x01
-#define BOOTFLAG_WARM		0x02
-
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index f387601..06151af 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -1004,13 +1004,4 @@
 			 ORxG_TRLX		       |\
 			 ORxG_EHTR)
 #endif /* CONFIG_SYS_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index e440e93..1665217 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -405,14 +405,6 @@
 			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot			*/
-
-/*
  * BCSRx
  *
  * Board Status and Control Registers
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 026826b..75e8bc5 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -381,14 +381,6 @@
 			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02	/* Software reboot			*/
-
-/*
  * BCSRx
  *
  * Board Status and Control Registers
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 8207844..d4c57ce 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -419,12 +419,4 @@
 #define CONFIG_SYS_OR5_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
 			 ORxG_ACS_DIV4)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index b0198aa..1a77bbc 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -1062,12 +1062,4 @@
 			   ORxG_EHTR)
 #endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 429b11c..409d52f 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -268,12 +268,4 @@
 #define SPD_EEPROM_ADDRESS	0x50
 #define CONFIG_SPD_EEPROM	1	/* use SPD EEPROM for setup		*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index 1cc2920..f657d49 100644
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -353,14 +353,6 @@ typedef unsigned int led_id_t;
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 3fa80a8..e71c491 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -1076,13 +1076,4 @@
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
 #endif /* CONFIG_SYS_LED_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index deaddde..40f8547 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -613,14 +613,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 564f661..bc2ce90 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -517,14 +517,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 53d06ed..0a4a758 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -423,14 +423,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 618513a..a4585a7 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -541,14 +541,6 @@
 #define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 19084ce..b910950 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -487,14 +487,6 @@
 /* Initial value of the stack pointern in internal SRAM */
 #define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* ################################################################################### */
 /* These defines will be used in arch/powerpc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 060026b..ac14606 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -39,9 +39,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index af1e19e..71241c4 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -389,14 +389,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 5db1379..970974c 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -38,9 +38,6 @@
 #define CONFIG_SYS_MPC8220_CLKIN	60000000 /* ... running at 60MHz */
 #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
-
 /*
  * Serial console configuration
  */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 1fe2a04..87adaa0 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -422,12 +422,4 @@
 
 #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index d377e19..3ce2a31 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -41,9 +41,6 @@
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running@33.000000MHz */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 891d2bf..3a996c2 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -364,14 +364,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 57bb8d1..5154c70 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -397,14 +397,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 5854366..65496ba 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -430,14 +430,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 425f472..4f653ff 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -465,13 +465,4 @@
 #define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define CONFIG_SYS_DOC_BASE 0x80000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 23f4c82..6b6be86 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -499,14 +499,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define FEC_ENET
 #define CONFIG_MII
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 1a47aad..fa37976 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -425,13 +425,4 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 7f1670e..a2f6be3 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -391,12 +391,4 @@
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 600ccfb..92ea86c 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -44,9 +44,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING		1	/* gives better performance */
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index 1589913..e139c54 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -474,14 +474,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #define CONFIG_NETDEV		eth0
 
 #define CONFIG_HOSTNAME		ve8313
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 7046e67..57b0d0b 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -475,15 +475,6 @@
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 /* Map peripheral control registers on CS4 */
 #define CONFIG_SYS_PERIPHERAL_BASE 0xA0000000
 #define CONFIG_SYS_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index f493e75..103325e 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -539,14 +539,6 @@
 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 3b2aede..7304a78 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -297,14 +297,6 @@
 #define CONFIG_SYS_TIME_POST		5000
 #define CONFIG_SYS_TIME_FACTORY_RESET	10000
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02		/* Software reboot			*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-- 
1.7.0.4

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13  5:21 [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage Peter Tyser
@ 2010-09-13  5:34 ` Wolfgang Denk
  2010-09-13  6:27   ` Stefan Roese
  2010-10-12 20:49 ` Wolfgang Denk
  1 sibling, 1 reply; 8+ messages in thread
From: Wolfgang Denk @ 2010-09-13  5:34 UTC (permalink / raw)
  To: u-boot

Dear Peter Tyser,

In message <1284355310-25449-1-git-send-email-ptyser@xes-inc.com> you wrote:
> BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every
> PowerPC board, so share a common definition.
> 
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> It looks like there are only a few boards (5) that use the warm/cold
> boot concept, maybe we should remove this largely unused feature?
> Or at least remove it for most CPU types?  Is anyone out there
> using it?

I added this with the very first versions of PPCBoot, more than a
decade ago. I've never seen it really used in the code.

I vote for removing it.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"May the forces of evil become confused on the way to your house."
- George Carlin

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13  5:34 ` Wolfgang Denk
@ 2010-09-13  6:27   ` Stefan Roese
  2010-09-13 14:53     ` Peter Tyser
  0 siblings, 1 reply; 8+ messages in thread
From: Stefan Roese @ 2010-09-13  6:27 UTC (permalink / raw)
  To: u-boot

On Monday 13 September 2010 07:34:40 Wolfgang Denk wrote:
> > BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every
> > PowerPC board, so share a common definition.
> > 
> > Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> > ---
> > It looks like there are only a few boards (5) that use the warm/cold
> > boot concept, maybe we should remove this largely unused feature?
> > Or at least remove it for most CPU types?  Is anyone out there
> > using it?
> 
> I added this with the very first versions of PPCBoot, more than a
> decade ago. I've never seen it really used in the code.
> 
> I vote for removing it.

Me too:

Acked-by: Stefan Roese <sr@denx.de>

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13  6:27   ` Stefan Roese
@ 2010-09-13 14:53     ` Peter Tyser
  2010-09-13 22:02       ` Wolfgang Denk
  0 siblings, 1 reply; 8+ messages in thread
From: Peter Tyser @ 2010-09-13 14:53 UTC (permalink / raw)
  To: u-boot

On Mon, 2010-09-13 at 08:27 +0200, Stefan Roese wrote:
> On Monday 13 September 2010 07:34:40 Wolfgang Denk wrote:
> > > BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every
> > > PowerPC board, so share a common definition.
> > > 
> > > Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> > > ---
> > > It looks like there are only a few boards (5) that use the warm/cold
> > > boot concept, maybe we should remove this largely unused feature?
> > > Or at least remove it for most CPU types?  Is anyone out there
> > > using it?
> > 
> > I added this with the very first versions of PPCBoot, more than a
> > decade ago. I've never seen it really used in the code.
> > 
> > I vote for removing it.
> 
> Me too:
> 
> Acked-by: Stefan Roese <sr@denx.de>

Sounds good, I'll resubmit.  Getting rid of the BOOTFLAG_* defines will
make bd->bi_bootflags unused.  What's the policy on modifying the
bd_info structure?  Leave an unused bi_bootflags field to prevent
breakage of OSes?

Best,
Peter

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13 14:53     ` Peter Tyser
@ 2010-09-13 22:02       ` Wolfgang Denk
  2010-09-13 22:13         ` Scott Wood
  0 siblings, 1 reply; 8+ messages in thread
From: Wolfgang Denk @ 2010-09-13 22:02 UTC (permalink / raw)
  To: u-boot

Dear Peter Tyser,

In message <1284389585.26713.2967.camel@petert> you wrote:
>
> Sounds good, I'll resubmit.  Getting rid of the BOOTFLAG_* defines will
> make bd->bi_bootflags unused.  What's the policy on modifying the
> bd_info structure?  Leave an unused bi_bootflags field to prevent
> breakage of OSes?

AFAICT only 2.4 PowerPC Linux kernels make use of bd_info. I think we
can just drop that entry.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Knowledge, sir, should be free to all!
	-- Harry Mudd, "I, Mudd", stardate 4513.3

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13 22:02       ` Wolfgang Denk
@ 2010-09-13 22:13         ` Scott Wood
  2010-09-14  2:40           ` Peter Tyser
  0 siblings, 1 reply; 8+ messages in thread
From: Scott Wood @ 2010-09-13 22:13 UTC (permalink / raw)
  To: u-boot

On Tue, 14 Sep 2010 00:02:49 +0200
Wolfgang Denk <wd@denx.de> wrote:

> Dear Peter Tyser,
> 
> In message <1284389585.26713.2967.camel@petert> you wrote:
> >
> > Sounds good, I'll resubmit.  Getting rid of the BOOTFLAG_* defines will
> > make bd->bi_bootflags unused.  What's the policy on modifying the
> > bd_info structure?  Leave an unused bi_bootflags field to prevent
> > breakage of OSes?
> 
> AFAICT only 2.4 PowerPC Linux kernels make use of bd_info. I think we
> can just drop that entry.

2.6 arch/ppc used it, and cuImage still does.  Ideally people would
use a device tree if they have a new kernel and a new U-Boot (are
there still individual boards that don't yet have device tree support in
U-Boot?), but currently the old scheme still works.  IMHO it should
either work, or be obvious about not working -- that is, either keep
bd_info compatible or remove support for passing it to an OS altogether.

-Scott

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13 22:13         ` Scott Wood
@ 2010-09-14  2:40           ` Peter Tyser
  0 siblings, 0 replies; 8+ messages in thread
From: Peter Tyser @ 2010-09-14  2:40 UTC (permalink / raw)
  To: u-boot

On Mon, 2010-09-13 at 17:13 -0500, Scott Wood wrote:
> On Tue, 14 Sep 2010 00:02:49 +0200
> Wolfgang Denk <wd@denx.de> wrote:
> 
> > Dear Peter Tyser,
> > 
> > In message <1284389585.26713.2967.camel@petert> you wrote:
> > >
> > > Sounds good, I'll resubmit.  Getting rid of the BOOTFLAG_* defines will
> > > make bd->bi_bootflags unused.  What's the policy on modifying the
> > > bd_info structure?  Leave an unused bi_bootflags field to prevent
> > > breakage of OSes?
> > 
> > AFAICT only 2.4 PowerPC Linux kernels make use of bd_info. I think we
> > can just drop that entry.
> 
> 2.6 arch/ppc used it, and cuImage still does.  Ideally people would
> use a device tree if they have a new kernel and a new U-Boot (are
> there still individual boards that don't yet have device tree support in
> U-Boot?), but currently the old scheme still works.  IMHO it should
> either work, or be obvious about not working -- that is, either keep
> bd_info compatible or remove support for passing it to an OS altogether.

I agree with Scott; breaking the bd_info defeats it purpose.  I won't
modify bd_info in my change and leave removing bd_info for a future
discussion.

Thanks,
Peter

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage
  2010-09-13  5:21 [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage Peter Tyser
  2010-09-13  5:34 ` Wolfgang Denk
@ 2010-10-12 20:49 ` Wolfgang Denk
  1 sibling, 0 replies; 8+ messages in thread
From: Wolfgang Denk @ 2010-10-12 20:49 UTC (permalink / raw)
  To: u-boot

Dear Peter Tyser,

In message <1284355310-25449-1-git-send-email-ptyser@xes-inc.com> you wrote:
> BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every
> PowerPC board, so share a common definition.
> 
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> It looks like there are only a few boards (5) that use the warm/cold
> boot concept, maybe we should remove this largely unused feature?
> Or at least remove it for most CPU types?  Is anyone out there
> using it?

Sorry, this doesn't apply any more:

fatal: sha1 information is lacking or useless
(include/configs/XPEDITE5170.h).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 powerpc: Cleanup BOOTFLAG_* usage


Can you please have a look?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I think animal testing is a terrible idea; they get all  nervous  and
give the wrong answers.

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2010-10-12 20:49 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-13  5:21 [U-Boot] [PATCH] powerpc: Cleanup BOOTFLAG_* usage Peter Tyser
2010-09-13  5:34 ` Wolfgang Denk
2010-09-13  6:27   ` Stefan Roese
2010-09-13 14:53     ` Peter Tyser
2010-09-13 22:02       ` Wolfgang Denk
2010-09-13 22:13         ` Scott Wood
2010-09-14  2:40           ` Peter Tyser
2010-10-12 20:49 ` Wolfgang Denk

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.