From mboxrd@z Thu Jan 1 00:00:00 1970 From: Janusz Krzysztofik Subject: Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h Date: Mon, 20 Dec 2010 18:32:22 +0100 Message-ID: <201012201832.24243.jkrzyszt@tis.icnet.pl> References: <201012172332.06480.jkrzyszt@tis.icnet.pl> <201012181639.29820.jkrzyszt@tis.icnet.pl> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org To: Aaro Koskinen Cc: Dmitry Torokhov , linux-omap@vger.kernel.org, linux-input@vger.kernel.org, Tony Lindgren , linux-arm-kernel@lists.infradead.org List-Id: linux-input@vger.kernel.org Monday 20 December 2010 16:29:32 Aaro Koskinen wrote: > Hello, > > On Sat, 18 Dec 2010, Janusz Krzysztofik wrote: > > Most keypad drivers make use of the > > defined macros, structures and inline functions. > > > > Convert omap-keypad driver to use those as well, as suggested by a > > compile time warning, hardcoded into the OMAP . > > > > Created against linux-2.6.37-rc5. > > Tested on Amstrad Delta. > > Compile tested with omap1_defconfig and omap2plus_defconfig > > shrinked to board-h4. > > > > Signed-off-by: Janusz Krzysztofik > > [...] > > > --- linux-2.6.37-rc5/arch/arm/mach-omap1/board-ams-delta.c.orig > > 2010-12-09 23:07:35.000000000 +0100 +++ > > linux-2.6.37-rc5/arch/arm/mach-omap1/board-ams-delta.c > > 2010-12-18 16:23:29.000000000 +0100 @@ -46,81 +46,79 @@ static u16 > > ams_delta_latch2_reg; > > static int ams_delta_keymap[] = { > > [...] > > > +static const struct matrix_keymap_data ams_delta_keymap_data = { > > + .keymap = ams_delta_keymap, > > + .keymap_size = ARRAY_SIZE(ams_delta_keymap), > > +}; > > You should update the ams_delta_keymap type as well, otherwise this > patch will introduce the following sparse warning: > > CHECK arch/arm/mach-omap1/board-ams-delta.c > arch/arm/mach-omap1/board-ams-delta.c:191:27: warning: incorrect type in initializer (different signedness) > arch/arm/mach-omap1/board-ams-delta.c:191:27: expected unsigned int const [usertype] *keymap > arch/arm/mach-omap1/board-ams-delta.c:191:27: got int static [toplevel] * Hi Aaro, How did you get this output? I'm using OpenEmbedded as my development environment. Running make with "C=1" (EXTRA_OEMAKE=" C=1 ") displays a lot but the above. Running sparse by hand breaks with "unable to open 'linux/init.h'". Any advice? Thanks, Janusz From mboxrd@z Thu Jan 1 00:00:00 1970 From: jkrzyszt@tis.icnet.pl (Janusz Krzysztofik) Date: Mon, 20 Dec 2010 18:32:22 +0100 Subject: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h In-Reply-To: References: <201012172332.06480.jkrzyszt@tis.icnet.pl> <201012181639.29820.jkrzyszt@tis.icnet.pl> Message-ID: <201012201832.24243.jkrzyszt@tis.icnet.pl> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Monday 20 December 2010 16:29:32 Aaro Koskinen wrote: > Hello, > > On Sat, 18 Dec 2010, Janusz Krzysztofik wrote: > > Most keypad drivers make use of the > > defined macros, structures and inline functions. > > > > Convert omap-keypad driver to use those as well, as suggested by a > > compile time warning, hardcoded into the OMAP . > > > > Created against linux-2.6.37-rc5. > > Tested on Amstrad Delta. > > Compile tested with omap1_defconfig and omap2plus_defconfig > > shrinked to board-h4. > > > > Signed-off-by: Janusz Krzysztofik > > [...] > > > --- linux-2.6.37-rc5/arch/arm/mach-omap1/board-ams-delta.c.orig > > 2010-12-09 23:07:35.000000000 +0100 +++ > > linux-2.6.37-rc5/arch/arm/mach-omap1/board-ams-delta.c > > 2010-12-18 16:23:29.000000000 +0100 @@ -46,81 +46,79 @@ static u16 > > ams_delta_latch2_reg; > > static int ams_delta_keymap[] = { > > [...] > > > +static const struct matrix_keymap_data ams_delta_keymap_data = { > > + .keymap = ams_delta_keymap, > > + .keymap_size = ARRAY_SIZE(ams_delta_keymap), > > +}; > > You should update the ams_delta_keymap type as well, otherwise this > patch will introduce the following sparse warning: > > CHECK arch/arm/mach-omap1/board-ams-delta.c > arch/arm/mach-omap1/board-ams-delta.c:191:27: warning: incorrect type in initializer (different signedness) > arch/arm/mach-omap1/board-ams-delta.c:191:27: expected unsigned int const [usertype] *keymap > arch/arm/mach-omap1/board-ams-delta.c:191:27: got int static [toplevel] * Hi Aaro, How did you get this output? I'm using OpenEmbedded as my development environment. Running make with "C=1" (EXTRA_OEMAKE=" C=1 ") displays a lot but the above. Running sparse by hand breaks with "unable to open 'linux/init.h'". Any advice? Thanks, Janusz