From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp01.frii.com ([216.17.135.167]:39637 "EHLO smtp01.frii.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754139Ab1BFX2B (ORCPT ); Sun, 6 Feb 2011 18:28:01 -0500 Date: Sun, 6 Feb 2011 16:28:00 -0700 From: Mark Zimmerman To: Dave Johansen Cc: v4l-dvb Mailing List Subject: Re: Tuning channels with DViCO FusionHDTV7 Dual Express Message-ID: <20110206232800.GA83692@io.frii.com> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: List-ID: Sender: On Sun, Feb 06, 2011 at 03:46:59PM -0700, Dave Johansen wrote: > I am trying to resurrect my MythBuntu system with a DViCO FusionHDTV7 > Dual Express. I had previously had some issues with trying to get > channels working in MythTV ( > http://www.mail-archive.com/linux-media@vger.kernel.org/msg03846.html > ), but now it locks up with MythBuntu 10.10 when I scan for channels > in MythTV and also with the scan command line utility. > > Here's the output from scan: > > scan /usr/share/dvb/atsc/us-ATSC- > center-frequencies-8VSB > scanning us-ATSC-center-frequencies-8VSB > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > >>> tune to: 189028615:8VSB > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x1ffb > > Any ideas/suggestions on how I can get this to work? Check your dmesg to see if yout firmware loads.