From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 5/5] omap2+: board-n8x0: Change the flags for the serial pads. Date: Wed, 23 Feb 2011 10:49:57 -0800 Message-ID: <20110223184956.GY15225@atomide.com> References: <1296191298-17545-1-git-send-email-r.sricharan@ti.com> <1296191298-17545-6-git-send-email-r.sricharan@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:51428 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932271Ab1BWSt7 (ORCPT ); Wed, 23 Feb 2011 13:49:59 -0500 Content-Disposition: inline In-Reply-To: <1296191298-17545-6-git-send-email-r.sricharan@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: sricharan Cc: linux-omap@vger.kernel.org, santosh.shilimkar@ti.com, paul@pwsan.com * sricharan [110127 21:05]: > The flag for remuxing uart3_rx_irxx pad is changed. > > Signed-off-by: sricharan > --- > arch/arm/mach-omap2/board-n8x0.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c > index 9b52e2d..bd51356 100644 > --- a/arch/arm/mach-omap2/board-n8x0.c > +++ b/arch/arm/mach-omap2/board-n8x0.c > @@ -751,7 +751,7 @@ static struct omap_board_mux board_mux[] __initdata = { > static struct omap_device_pad serial2_pads[] __initdata = { > { > .name = "uart3_rx_irrx.uart3_rx_irrx", > - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, > + .flags = OMAP_DEVICE_PAD_REMUX_IDLE | OMAP_DEVICE_PAD_WAKEUP, > .enable = OMAP_MUX_MODE0, > .idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */ > }, This should not be needed when rebased on my patch to replace patch 1/5. Regards, Tony