From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: Re: beagleboardxm 2.6.39rc4 mcbsp problems. Date: Tue, 17 May 2011 13:42:34 +0300 Message-ID: <201105171342.35056.peter.ujfalusi@ti.com> References: <1305122135-27938-1-git-send-email-premi@ti.com> <201105161154.55850.peter.ujfalusi@ti.com> <4DD167EC.2010007@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:43117 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752232Ab1EQKmi convert rfc822-to-8bit (ORCPT ); Tue, 17 May 2011 06:42:38 -0400 In-Reply-To: <4DD167EC.2010007@gmail.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Steve Calfee Cc: Jarkko Nikula , "Premi, Sanjeev" , "linux-omap@vger.kernel.org" , "Girdwood, Liam" Hi, On Monday 16 May 2011 21:07:40 Steve Calfee wrote: > No, they get called. I just don't get the clock on the bclk pin. OK. Could you try to disconnect the CLKX, and FSX lines from OMAP, and see = that=20 you have the clocks on the codec side? If in this way you still can not see the clocks, than your codec (max98= 095 ?)=20 is not generating the clocks. Could you also post from your machine driver how you configure the form= ats for=20 cpu/codec DAI (snd_soc_dai_set_fmt call)? While the clock lines are not physically connected, you can try to conf= igure=20 either side to generate the correct clocks on the lines. When you see t= hat,=20 you can connect them together, and see (hear) if it works. --=20 P=C3=A9ter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html