All of lore.kernel.org
 help / color / mirror / Atom feed
From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: akpm@linux-foundation.org, a.zummo@towertech.it,
	aghayal@codeaurora.org, ashayj@codeaurora.org,
	mcuos.com@gmail.com, sameo@linux.intel.com, sboyd@codeaurora.org
Subject: + drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix.patch added to -mm tree
Date: Tue, 07 Jun 2011 17:33:03 -0700	[thread overview]
Message-ID: <201106080033.p580X3ak005209@imap1.linux-foundation.org> (raw)


The patch titled
     drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix
has been added to the -mm tree.  Its filename is
     drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix
From: Andrew Morton <akpm@linux-foundation.org>

cosmetic tweaks

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Cc: Ashay Jaiswal <ashayj@codeaurora.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/rtc/rtc-pm8xxx.c |   20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff -puN drivers/rtc/rtc-pm8xxx.c~drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix drivers/rtc/rtc-pm8xxx.c
--- a/drivers/rtc/rtc-pm8xxx.c~drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix
+++ a/drivers/rtc/rtc-pm8xxx.c
@@ -15,7 +15,7 @@
 #include <linux/rtc.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
-#include<linux/spinlock.h>
+#include <linux/spinlock.h>
 
 #include <linux/mfd/pm8xxx/core.h>
 #include <linux/mfd/pm8xxx/rtc.h>
@@ -46,7 +46,6 @@
  * @rtc_dev:		device structure.
  * @ctrl_reg_lock:	spinlock protecting access to ctrl_reg.
  */
-
 struct pm8xxx_rtc {
 	struct rtc_device *rtc;
 	int rtc_alarm_irq;
@@ -63,7 +62,6 @@ struct pm8xxx_rtc {
  * The RTC registers need to be read/written one byte at a time. This is a
  * hardware limitation.
  */
-
 static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
 		int base, int count)
 {
@@ -105,8 +103,7 @@ static int pm8xxx_write_wrapper(struct p
  * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
  * 4. Enable alarm if disabled in step 1.
  */
-static int
-pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	int rc, i;
 	unsigned long secs, irq_flags;
@@ -181,8 +178,7 @@ rtc_rw_fail:
 	return rc;
 }
 
-static int
-pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	int rc;
 	u8 value[NUM_8_BIT_RTC_REGS], reg;
@@ -232,8 +228,7 @@ pm8xxx_rtc_read_time(struct device *dev,
 	return 0;
 }
 
-static int
-pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	int rc, i;
 	u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
@@ -277,8 +272,7 @@ rtc_rw_fail:
 	return rc;
 }
 
-static int
-pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	int rc;
 	u8 value[NUM_8_BIT_RTC_REGS];
@@ -310,9 +304,7 @@ pm8xxx_rtc_read_alarm(struct device *dev
 	return 0;
 }
 
-
-static int
-pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
 {
 	int rc;
 	unsigned long irq_flags;
_

Patches currently in -mm which might be from akpm@linux-foundation.org are

backlight-add-backlight-type-fix.patch
vmscanmemcg-memcg-aware-swap-token-fix.patch
vmscanmemcg-memcg-aware-swap-token-fix-checkpatch-fixes.patch
memcg-add-documentation-for-the-memorynumastat-api-fix.patch
linux-next.patch
next-remove-localversion.patch
i-need-old-gcc.patch
arch-alpha-kernel-systblss-remove-debug-check.patch
cris-fix-a-build-error-in-kernel-forkc-checkpatch-fixes.patch
drivers-base-platformc-dont-mark-platform_device_register_resndata-as-__init_or_module.patch
arch-x86-include-asm-delayh-fix-udelay-and-ndelay-for-8-bit-args.patch
slab-use-numa_no_node.patch
mm.patch
mm-extend-memory-hotplug-api-to-allow-memory-hotplug-in-virtual-machines-fix.patch
pagewalk-add-locking-rule-comments-fix.patch
writeback-sync-expired-inodes-first-in-background-writeback.patch
writeback-split-inode_wb_list_lock-into-bdi_writebacklist_lock.patch
frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch
hpet-factor-timer-allocate-from-open.patch
leds-route-kbd-leds-through-the-generic-leds-layer.patch
checkpatch-suggest-using-min_t-or-max_t-v2.patch
lib-hexdumpc-make-hex2bin-return-the-updated-src-address.patch
fs-binfmt_miscc-use-kernels-hex_to_bin-method-fix.patch
fs-binfmt_miscc-use-kernels-hex_to_bin-method-fix-fix.patch
init-skip-calibration-delay-if-previously-done-fix.patch
init-skip-calibration-delay-if-previously-done-fix-fix.patch
init-calibratec-calibrate_delay-tidy-up-the-pr_info-messages.patch
drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix.patch
cpusets-randomize-node-rotor-used-in-cpuset_mem_spread_node.patch
cpusets-randomize-node-rotor-used-in-cpuset_mem_spread_node-fix-2.patch
cpusets-randomize-node-rotor-used-in-cpuset_mem_spread_node-cpusets-initialize-spread-rotor-lazily-fix.patch
scatterlist-new-helper-functions.patch
scatterlist-new-helper-functions-update-fix.patch
kexec-remove-kmsg_dump_kexec.patch
journal_add_journal_head-debug.patch
mutex-subsystem-synchro-test-module-fix.patch
slab-leaks3-default-y.patch
put_bh-debug.patch
memblock-add-input-size-checking-to-memblock_find_region.patch
memblock-add-input-size-checking-to-memblock_find_region-fix.patch


             reply	other threads:[~2011-06-08  0:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-08  0:33 akpm [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-05-06 20:49 + drivers-rtc-add-support-for-qualcomm-pmic8xxx-rtc-fix.patch added to -mm tree akpm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201106080033.p580X3ak005209@imap1.linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=a.zummo@towertech.it \
    --cc=aghayal@codeaurora.org \
    --cc=ashayj@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcuos.com@gmail.com \
    --cc=mm-commits@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.