From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:62929 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750992Ab1GDFYR (ORCPT ); Mon, 4 Jul 2011 01:24:17 -0400 Date: Mon, 4 Jul 2011 10:54:11 +0530 From: Rajkumar Manoharan To: Forest Bond CC: Mohammed Shafi , "Luis R. Rodriguez" , Jouni Malinen , Vasanthakumar Thiagarajan , Senthil Balasubramanian , Subject: Re: ath9k_htc fails to initialize TL-WN721N with compat-wireless 3.0-rc4-1 Message-ID: <20110704052410.GA1364@vmraj-lnx.users.atheros.com> (sfid-20110704_072426_245244_96BD3FD1) References: <20110701133553.GA7125@alittletooquiet.net> <20110701173237.GC7125@alittletooquiet.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" In-Reply-To: <20110701173237.GC7125@alittletooquiet.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Fri, Jul 01, 2011 at 01:32:37PM -0400, Forest Bond wrote: > Hi shafi, > > [Sorry for the duplicate, lost the Cc's the first time around.] > > On Fri, Jul 01, 2011 at 07:39:40PM +0530, Mohammed Shafi wrote: > > On Fri, Jul 1, 2011 at 7:31 PM, Mohammed Shafi wrote: > > > On Fri, Jul 1, 2011 at 7:05 PM, Forest Bond wrote: > > >> Now the module loads fine and appears to load the firmware correctly, but the > > >> interface never comes up.  Here's what happens when I insert the device: > > >> > > >> [  206.657723] Compat-wireless backport release: compat-wireless-v3.0-rc4-1 > > >> [  206.657732] Backport based on linux-2.6-allstable.git v3.0-rc4 > > >> [  206.864667] Calling CRDA to update world regulatory domain > > >> [  207.714633] usb 5-7: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288 > > >> [  207.861037] ath9k_htc 5-7:1.0: ath9k_htc: HTC initialized with 33 credits > > >> > > >> At this point the interface is not visible in the output of ifconfig.  Something > > >> has gone wrong with USB, because lsusb hangs until I unplug the device, at which > > >> point I see the following in dmesg: > > >> > > >> [  225.464212] usb 5-7: USB disconnect, address 5 > > >> [  225.592282] ath: Reading Magic # failed > > >> [  225.592310] ath: no band has been marked as supported in EEPROM > > >> [  225.592315] ath: Unable to initialize hardware; initialization status: -22 > > >> [  225.592321] ath: Unable to initialize hardware; initialization status: -22 > > >> [  225.592336] Failed to initialize the device > > >> [  225.592400] ath9k_htc: probe of 5-7:1.0 failed with error -22 > > >> [  225.712249] usbcore: registered new interface driver ath9k_htc > > > > > > something wrong in reading EEPROM, please post the kernel log for > > > sudo modprobe ath9k_htc debug debug=0x404 > > > > please do > > sudo modprobe ath9k_htc debug=0xffffffff > > this will give lots of information > > [ 98.421395] Compat-wireless backport release: compat-wireless-v3.0-rc4-1 > [ 98.421405] Backport based on linux-2.6-allstable.git v3.0-rc4 > [ 98.638709] Calling CRDA to update world regulatory domain > [ 99.219353] usbcore: registered new interface driver ath9k_htc > [ 103.829197] usb 5-7: new high speed USB device using ehci_hcd and address 5 > [ 103.985215] usb 5-7: configuration #1 chosen from 1 choice > [ 104.288053] usb 5-7: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288 > [ 104.448323] ath9k_htc 5-7:1.0: ath9k_htc: HTC initialized with 33 credits > [ 104.453395] ath: UNDEFINED -> AWAKE > [ 104.454654] ath: serialize_regmode is 0 > [ 104.686218] ath: Timeout waiting for WMI command: WMI_REG_WRITE_CMDID > [ 104.686240] ath: REGISTER WRITE FAILED, multi len: 9 > [ 104.901237] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID > [ 104.901259] ath: REGISTER READ FAILED: (0x9c00, -110) > [ 104.901276] ath: Reading from EEPROM, not flash > [ 105.136983] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID > [ 105.137000] ath: Multiple REGISTER READ FAILED (count: 8) > [ 105.408496] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID > [ 105.408513] ath: Multiple REGISTER READ FAILED (count: 8) > [ 105.676507] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID > [ 105.676524] ath: Multiple REGISTER READ FAILED (count: 8) > [ 105.911084] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID Please share your PID/VID. -- Rajkumar