From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Mon, 11 Jul 2011 22:12:32 +0200 Subject: [U-Boot] [GIT pull] Please pull u-boot-mpc85xx In-Reply-To: References: Message-ID: <20110711201232.BF2A11579E14@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Kumar Gala, In message you wrote: > The following changes since commit 810cb19003ffe0115d10700fc512a2a743916f20: > > MPC83XX: Fix PCI express clock setup (2011-07-06 19:09:28 -0500) > > are available in the git repository at: > git://git.denx.de/u-boot-mpc85xx master > > Felix Radensky (1): > powerpc/85xx: Fix pin muxing for second USB controller > > Kumar Gala (4): > powerpc/85xx: Fix compile errors if CONFIG_SYS_{B,Q}MAN_MEM_PHYS aren't set > powerpc/85xx: Fix compile errors if CONFIG_SYS_{BR,OR}0_PRELIM aren't set > powerpc/85xx: Fix compile errors if CONFIG_SYS_DPAA_QBMAN isn't set > powerpc/85xx: Add P2041 processor support > > Mingkai Hu (1): > powerpc/p2040: Add various p2040 specific information > > Ramneek Mehresh (5): > qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB > powerpc/8xxx: Update USB mode device tree fixup > powerpc/85xx: Specify hwconfig usage for USB controller > qoriq/p1_p2_rdb: USB device-tree fixups for P1020 > powerpc/85xx: Add default usb mode and phy type to hwconfig > > Roy Zang (1): > powerpc/85xx: Add basic support for P1023RDS board > > Shaohui Xie (1): > powerpc/85xx: Add NAND boot support for P3041/P5020DS > > Timur Tabi (2): > powerpc/86xx: display boot device and bank on the MPC8610 HPCD > powerpc/85xx: remove SERDES4 soft-reset work-around > > York Sun (11): > powerpc/mpc8xxx: adjust DDR burst length and chop accroding to sdram width > powerpc/mpc8xxx: check SPD length before using part number > powerpc/mpc8xxx: Add 16-bit support for DDR3 > Adding more SPD registers > powerpc/mpc8xxx: Enable calculation for fixed DDR chips > powerpc/mpc8xxx: Adding fallback to raw timing on supported boards > powerpc/mpc8xxx: fix DDR data width checking > powerpc/corenet_ds: Fix RCW overriding for RDIMM > powerpc/mpc85xx: Display a warning for unsupported DDR data rates > powerpc/mpc8xxx: Allow override DDR read-to-write turnaround time > powerpc/corenet_ds: add back buffer write for NOR flash > > MAINTAINERS | 1 + > README | 6 + > arch/powerpc/cpu/mpc85xx/Makefile | 6 + > arch/powerpc/cpu/mpc85xx/cpu.c | 4 +- > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 71 ++- > arch/powerpc/cpu/mpc85xx/p2040_ids.c | 109 +++++ > arch/powerpc/cpu/mpc85xx/p2040_serdes.c | 24 + > arch/powerpc/cpu/mpc85xx/p3041_ids.c | 11 +- > arch/powerpc/cpu/mpc85xx/p4080_ids.c | 13 +- > arch/powerpc/cpu/mpc85xx/p5020_ids.c | 11 +- > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + > arch/powerpc/cpu/mpc8xxx/ddr/Makefile | 13 +- > arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 3 + > arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 7 + > arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 3 +- > arch/powerpc/cpu/mpc8xxx/ddr/main.c | 34 ++- > arch/powerpc/cpu/mpc8xxx/ddr/options.c | 44 ++- > arch/powerpc/cpu/mpc8xxx/fdt.c | 77 +++- > arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 2 + > arch/powerpc/include/asm/config_mpc85xx.h | 16 + > arch/powerpc/include/asm/fsl_ddr_sdram.h | 6 + > arch/powerpc/include/asm/immap_85xx.h | 2 +- > arch/powerpc/include/asm/processor.h | 2 + > board/freescale/corenet_ds/corenet_ds.c | 2 + > board/freescale/corenet_ds/ddr.c | 8 +- > board/freescale/corenet_ds/law.c | 4 + > board/freescale/corenet_ds/tlb.c | 4 + > board/freescale/mpc8572ds/ddr.c | 8 +- > board/freescale/mpc8610hpcd/mpc8610hpcd.c | 25 +- > board/freescale/mpc8641hpcn/ddr.c | 5 + > board/freescale/p1023rds/Makefile | 38 ++ > board/freescale/p1023rds/bcsr.h | 53 +++ > board/freescale/p1023rds/law.c | 35 ++ > board/freescale/p1023rds/p1023rds.c | 162 +++++++ > board/freescale/p1023rds/tlb.c | 118 +++++ > board/freescale/p1_p2_rdb/p1_p2_rdb.c | 47 ++ > board/freescale/p2020ds/ddr.c | 6 + > board/xes/xpedite550x/ddr.c | 6 + > boards.cfg | 4 + > doc/README.fsl-hwconfig | 25 + > doc/README.p1023rds | 101 ++++ > include/configs/MPC8536DS.h | 3 +- > include/configs/P1023RDS.h | 562 +++++++++++++++++++++++ > include/configs/P1_P2_RDB.h | 3 +- > include/configs/P2020DS.h | 3 +- > include/configs/corenet_ds.h | 39 ++- > include/ddr_spd.h | 4 +- > nand_spl/board/freescale/p1023rds/Makefile | 132 ++++++ > nand_spl/board/freescale/p1023rds/nand_boot.c | 99 ++++ > 49 files changed, 1888 insertions(+), 75 deletions(-) > create mode 100644 arch/powerpc/cpu/mpc85xx/p2040_ids.c > create mode 100644 board/freescale/p1023rds/Makefile > create mode 100644 board/freescale/p1023rds/bcsr.h > create mode 100644 board/freescale/p1023rds/law.c > create mode 100644 board/freescale/p1023rds/p1023rds.c > create mode 100644 board/freescale/p1023rds/tlb.c > create mode 100644 doc/README.p1023rds > create mode 100644 include/configs/P1023RDS.h > create mode 100644 nand_spl/board/freescale/p1023rds/Makefile > create mode 100644 nand_spl/board/freescale/p1023rds/nand_boot.c Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de We are all agreed that your theory is crazy. The question which divides us is whether it is crazy enough to have a chance of being correct. My own feeling is that it is not crazy enough. - Niels Bohr