From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 5 Aug 2011 00:12:33 +0200 Subject: [U-Boot] [PATCH 2/2] atmel: Update support of board AT91SAM9M10G45-EK to new style In-Reply-To: <1312492441.31913.147.camel@ubuntu> References: <1312484010-7493-1-git-send-email-thomas.petazzoni@free-electrons.com> <1312484010-7493-3-git-send-email-thomas.petazzoni@free-electrons.com> <1312489318.31913.138.camel@ubuntu> <20110804225642.1a54819e@skate> <1312492441.31913.147.camel@ubuntu> Message-ID: <20110805001233.64b720fc@skate> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Le Thu, 04 Aug 2011 21:14:01 +0000, Reinhard Meyer a ?crit : > That would mean, that the other boards would not display the message > either..!? I cannot verify this, I can only verify seamless build.. I guess so. However, I have just taken an AT91SAM9261-EK and it seems that U-Boot from atmel/master does not work at all. First, the AT91Bootstrap binary provided by Atmel only loads 0x33900 bytes from the Dataflash, but current U-Boot binaries are larger than that. This might surprise people trying to mix a recent version of U-Boot with the normal AT91Bootstrap configuration on this platform. Unfortunately, even with this fix in place, U-Boot still doesn't show any sign of life on this platform... Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com