From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [RFC PATCH 6/6] hwmon: OMAP4: On die temperature sensor driver Date: Wed, 17 Aug 2011 06:45:04 -0700 Message-ID: <20110817134504.GB12113@ericsson.com> References: <1312979122-5896-1-git-send-email-j-keerthy@ti.com> <1312979122-5896-7-git-send-email-j-keerthy@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: lm-sensors-bounces@lm-sensors.org Errors-To: lm-sensors-bounces@lm-sensors.org To: "J, KEERTHY" Cc: "b-cousson@ti.com" , "rnayak@ti.com" , "lm-sensors@lm-sensors.org" , "vishwanath.bs@ti.com" , "linux-omap@vger.kernel.org" List-Id: linux-omap@vger.kernel.org On Wed, Aug 17, 2011 at 06:37:10AM -0400, J, KEERTHY wrote: [ ... ] > > Hi Guenter, > > Any inputs on the driver? > Hi Keerthy. I think there was so much feedback that I would just add noise at this time, and stumble over the same issues. I'll look into it after the feedback has been applied. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Wed, 17 Aug 2011 13:45:04 +0000 Subject: Re: [lm-sensors] [RFC PATCH 6/6] hwmon: OMAP4: On die temperature Message-Id: <20110817134504.GB12113@ericsson.com> List-Id: References: <1312979122-5896-1-git-send-email-j-keerthy@ti.com> <1312979122-5896-7-git-send-email-j-keerthy@ti.com> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: "J, KEERTHY" Cc: "b-cousson@ti.com" , "rnayak@ti.com" , "lm-sensors@lm-sensors.org" , "vishwanath.bs@ti.com" , "linux-omap@vger.kernel.org" On Wed, Aug 17, 2011 at 06:37:10AM -0400, J, KEERTHY wrote: [ ... ] > > Hi Guenter, > > Any inputs on the driver? > Hi Keerthy. I think there was so much feedback that I would just add noise at this time, and stumble over the same issues. I'll look into it after the feedback has been applied. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors