From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 20 Nov 2011 01:18:05 +0100
Subject: [U-Boot] [PATCH 2/9] ARM: cerf250: re-add MACH_TYPE_PXA_CERF
In-Reply-To: <201111200109.11390.marek.vasut@gmail.com>
References: <1321703956-4224-1-git-send-email-agust@denx.de>
	<CAPnjgZ1bATy2tvh2Z5xdD+6DhxKzhozvg5TwHbo+7=7fwk_Xiw@mail.gmail.com>
	<201111200109.11390.marek.vasut@gmail.com>
Message-ID: <201111200118.05752.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> > On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin <agust@denx.de> wrote:
> > > MACH_TYPE_PXA_CERF was removed from mach-types.h.
> > > Add it to the board config file.
> > > 
> > > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> > 
> > I built this and it fixes the failure. I did not test on hardware.
> > 
> > Acked-by: Simon Glass <sjg@chromium.org>
> 
> Good, CCing original maintainer.
> 
> Is the device still activelly used or can we drop it?
> 
> M

I see delivery failure to the address, this board is dead. Time for a good-bye 
patch?

M
> 
> > > ---
> > > 
> > >  board/cerf250/cerf250.c   |    3 ---
> > >  include/configs/cerf250.h |    3 +++
> > >  2 files changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
> > > index 043afea..615c288 100644
> > > --- a/board/cerf250/cerf250.c
> > > +++ b/board/cerf250/cerf250.c
> > > @@ -43,9 +43,6 @@ int board_init (void)
> > > 
> > >        dcache_disable();
> > >        icache_disable();
> > > 
> > > -       /* arch number of cerf PXA Board */
> > > -       gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
> > > -
> > > 
> > >        /* adress of boot parameters */
> > >        gd->bd->bi_boot_params = 0xa0000100;
> > > 
> > > diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
> > > index 70427da..dde9e14 100644
> > > --- a/include/configs/cerf250.h
> > > +++ b/include/configs/cerf250.h
> > > @@ -42,6 +42,9 @@
> > > 
> > >  #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff
> > >  */
> > > 
> > > +#define MACH_TYPE_PXA_CERF     139
> > > +#define CONFIG_MACH_TYPE       MACH_TYPE_PXA_CERF
> > > +
> > > 
> > >  /* we will never enable dcache, because we have to setup MMU first */
> > >  #define CONFIG_SYS_DCACHE_OFF
> > > 
> > > --
> > > 1.7.5.4
> > > 
> > > _______________________________________________
> > > U-Boot mailing list
> > > U-Boot at lists.denx.de
> > > http://lists.denx.de/mailman/listinfo/u-boot
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot