From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 10 Dec 2011 22:54:55 +0100 Subject: [U-Boot] Pull request: u-boot-arm/master In-Reply-To: <4EE23A7F.2090307@aribaud.net> References: <4EE23A7F.2090307@aribaud.net> Message-ID: <20111210215455.4F3C9823C9@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Albert ARIBAUD, In message <4EE23A7F.2090307@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit c4eba6ec5c58083b38340724c006294c7a4fe2eb: > > common/usb_kbd.c: fix bug introduced in commit 00b7d6e (2011-12-09 > 12:09:35 +0100) > > are available in the git repository at: > git://git.denx.de/u-boot-arm.git master > > Chander Kashyap (1): > S5PC2XX: Rename S5pc2XX to exynos > > Jason Liu (4): > i.mx: introduce the armv7/imx-common folder > i.mx: add the initial support for freescale i.MX6Q processor > i.mx: mxc_gpio: add the i.mx6q support > i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board > > Marek Vasut (4): > M28: Document that units has to be set to sectors on SD bootcard > M28: Fix typo > i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28 > M28: Cleanup memsize.o OOT build > > Simon Glass (9): > tegra2: Add arch_cpu_init() to fire up Cortex-A9 > tegra2: Simplify tegra_start() boot path > arm: Move CP15 init out of cpu_init_crit() > tegra2: Enable instruction cache > tegra2: Remove unneeded boot code > tegra2: Remove unneeded config option > tegra2: Remove unused low-level Tegra2 UART code > tegra2: Remove unneeded 'dynamic ram size' message > tegra2: Don't use board pointer before it is set up > > Stephen Warren (4): > tegra2: Move board_mmc_init into board files > tegra2: Modify MMC driver to handle power and cd GPIOs > tegra2: Add support for Ventana > tegra2: Use new GPIO APIs in gpio_config_uart() > > MAINTAINERS | 12 +- > Makefile | 10 +- > arch/arm/cpu/arm926ejs/mx28/Makefile | 4 + > .../arm/cpu/arm926ejs/mx28/mx28_init.h | 0 > arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 + > .../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +- > .../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +- > .../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0 > .../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +- > arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile | 0 > arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c | 50 +- > arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c | 0 > arch/arm/cpu/armv7/imx-common/Makefile | 47 + > arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++ > arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0 > arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +- > arch/arm/cpu/armv7/mx5/Makefile | 2 +- > arch/arm/cpu/armv7/mx5/soc.c | 77 - > arch/arm/cpu/armv7/mx6/Makefile | 48 + > arch/arm/cpu/armv7/mx6/clock.c | 366 +++++ > arch/arm/cpu/armv7/mx6/iomux-v3.c | 71 + > arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 + > arch/arm/cpu/armv7/mx6/soc.c | 82 + > arch/arm/cpu/armv7/start.S | 36 +- > arch/arm/cpu/armv7/tegra2/Makefile | 5 + > arch/arm/cpu/armv7/tegra2/ap20.c | 54 +- > arch/arm/cpu/armv7/tegra2/ap20.h | 10 +- > arch/arm/cpu/armv7/tegra2/board.c | 35 +- > arch/arm/cpu/armv7/tegra2/config.mk | 7 +- > arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 118 -- > .../asm/{arch-s5pc2xx => arch-exynos}/adc.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/clk.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/clock.h | 2 +- > .../asm/{arch-s5pc2xx => arch-exynos}/cpu.h | 64 +- > .../asm/{arch-s5pc2xx => arch-exynos}/gpio.h | 28 +- > .../asm/{arch-s5pc2xx => arch-exynos}/mmc.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/pwm.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/sromc.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h | 0 > .../asm/{arch-s5pc2xx => arch-exynos}/uart.h | 0 > arch/arm/include/asm/arch-mx28/sys_proto.h | 6 + > arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++ > arch/arm/include/asm/arch-mx6/clock.h | 50 + > .../arm/include/asm/arch-mx6/gpio.h | 18 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++ > arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++ > arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683 > ++++++++++++++++++++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 38 + > arch/arm/include/asm/u-boot-arm.h | 3 + > board/denx/m28evk/Makefile | 11 +- > board/denx/m28evk/m28evk.c | 2 +- > board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +- > board/freescale/mx6qarm2/Makefile | 42 + > board/freescale/mx6qarm2/imximage.cfg | 167 ++ > board/freescale/mx6qarm2/mx6qarm2.c | 155 ++ > board/nvidia/common/board.c | 58 +- > board/nvidia/common/board.h | 4 +- > board/nvidia/harmony/harmony.c | 57 +- > board/nvidia/seaboard/seaboard.c | 81 +- > board/nvidia/ventana/Makefile | 49 + > board/samsung/origen/lowlevel_init.S | 26 +- > board/samsung/origen/mem_setup.S | 12 +- > board/samsung/origen/origen.c | 8 +- > board/samsung/origen/origen_setup.h | 8 +- > board/samsung/smdkv310/lowlevel_init.S | 22 +- > board/samsung/smdkv310/mem_setup.S | 8 +- > board/samsung/smdkv310/smdkv310.c | 8 +- > board/samsung/universal_c210/lowlevel_init.S | 24 +- > board/samsung/universal_c210/universal.c | 8 +- > boards.cfg | 8 +- > doc/README.m28 | 3 +- > drivers/gpio/mxc_gpio.c | 4 +- > drivers/gpio/tegra2_gpio.c | 6 +- > drivers/mmc/tegra2_mmc.c | 42 +- > drivers/mmc/tegra2_mmc.h | 4 +- > drivers/serial/Makefile | 1 - > drivers/serial/serial_tegra2.c | 77 - > include/configs/m28evk.h | 6 +- > include/configs/mx6qarm2.h | 162 ++ > include/configs/origen.h | 6 +- > include/configs/s5pc210_universal.h | 10 +- > include/configs/smdkv310.h | 6 +- > include/configs/tegra2-common.h | 3 +- > include/configs/ventana.h | 55 + > 84 files changed, 4903 insertions(+), 703 deletions(-) > rename board/denx/m28evk/m28_init.h => > arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%) > create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c > rename board/denx/m28evk/mem_init.c => > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%) > rename board/denx/m28evk/power_init.c => > arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%) > rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%) > rename {board/denx/m28evk => > arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%) > rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile (100%) > rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c (81%) > rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c (100%) > create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile > create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c > rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%) > rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%) > mode change 100644 => 100755 > create mode 100644 arch/arm/cpu/armv7/mx6/Makefile > create mode 100644 arch/arm/cpu/armv7/mx6/clock.c > create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c > create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S > create mode 100644 arch/arm/cpu/armv7/mx6/soc.c > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/adc.h (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clk.h (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clock.h (99%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/cpu.h (64%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/gpio.h (84%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/mmc.h (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/pwm.h (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sromc.h (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h > (100%) > rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/uart.h (100%) > create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h > create mode 100644 arch/arm/include/asm/arch-mx6/clock.h > rename drivers/serial/serial_tegra2.h => > arch/arm/include/asm/arch-mx6/gpio.h (75%) > create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h > create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h > create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h > create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h > rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%) > create mode 100644 board/freescale/mx6qarm2/Makefile > create mode 100644 board/freescale/mx6qarm2/imximage.cfg > create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c > create mode 100644 board/nvidia/ventana/Makefile > delete mode 100644 drivers/serial/serial_tegra2.c > create mode 100644 include/configs/mx6qarm2.h > create mode 100644 include/configs/ventana.h Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "We learn from history that we learn nothing from history." - George Bernard Shaw