From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 7 Jan 2012 00:22:17 +0100
Subject: [U-Boot] Possible Denx m28evk ethernet problem + solution
In-Reply-To: <6F6D3536-378A-4DA4-8C7E-7C6D74CC7895@delien.nl>
References: <3C18F794-D414-406A-BEA4-ABE59990B5BF@Delien.nl>
	<201201062151.43616.marek.vasut@gmail.com>
	<6F6D3536-378A-4DA4-8C7E-7C6D74CC7895@delien.nl>
Message-ID: <201201070022.17784.marek.vasut@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

> > make mx28evk_config? board/freescale/mx28evk
> 
> Are you sure you checked it in? I checked, but I couldn't find it.
> (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/config
> s;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)

It's in u-boot-imx tree.

> 
> > Yes, it can go both ways.
> 
> For the SoC I understand. But he PHYs on the Freescale don't, as
> far as I know.
> Anyway, the Denx module probably uses more advanced PHYs.

Different one, I dunno if it's more advanced or not.

> 
> > The PHY doesn't supply clock on mx28evk, CPU does.
> 
> I'm glad we agree here.
> 
> > Yea ...
> > 
> > M28EVK: PHY supplies clock to CPU
> > MX28EVK: CPU supplies clock to PHY
> 
> It's getting rather obvious, now you've given me a bit of insight in the
> differences between both boards. Thanks.

You're welcome

> 
> > Still, the support is already there.
> 
> I figured that too; I expected you probably made that first before moving
> on to the Denx module.

Fabio did (Cced), after DENX module was supported.

Please always Cc the mailing list etc.

> But I couldn't find it.
> At first I thought m28evk_config would support it (too). The similarity in
> names suggests similarity in boards. But after patching too much code,
> I figured to implement mx28evk_config and board/freescale/mx28evk
> myself. What a waste of time.... At least it was a good exercise before
> our product boards arrive next week.
> 
> I just pulled my git repository and Make can't find a rule to make
> mx28evk_config, so it's really not there. Not even hidden in another
> configuration.
> 
> Wasn't it removed, since the Freescale implementation in 2009.08
> broke?

No, see above.

M
> 
> Robert.