Hi all,

Just a quick note to say I got a boot OOPs with next-20120208 and 9 on a
Power7 blade (my other PowerPC boot tests are ok.  I'll investigate this
further on Monday.

The line referenced below is:

BUG_ON(!kobj || !kobj->sd || !attr);

in sysfs_create_file().

calling  .topology_init+0x0/0x1ac @ 1
initcall 7_.async_cpu_up+0x0/0x40 returned 0 after 9765 usecs
async_continuing @ 20 after 9765 usec
------------[ cut here ]------------
kernel BUG at fs/sysfs/file.c:573!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=32 NUMA pSeries
Modules linked in:
NIP: c00000000024a35c LR: c0000000004ee050 CTR: c00000000083ca24
REGS: c0000003fd9e7560 TRAP: 0700   Not tainted  (3.3.0-rc2-autokern1)
MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 88002082  XER: 0000000f
CFAR: c00000000024a370
TASK = c0000003fd9e8000[20] 'kworker/u:6' THREAD: c0000003fd9e4000 CPU: 0
GPR00: 0000000000000001 c0000003fd9e77e0 c000000000d19bb8 0000000000000000 
GPR04: c000000000bf37a8 0000000000000008 8000000002096400 0000000000000000 
GPR08: 0000000000000000 c000000000f80028 c000000000d52bd8 0000000000000000 
GPR12: 0000000048002088 c00000000f33b000 0000000001affa78 00000000009aa000 
GPR16: 0000000000e1f3c8 0000000002d517f0 0000000001aff984 0000000000000060 
GPR20: 0000000000000000 ffffffffffffffff 0000000000000000 c000000000c45128 
GPR24: 0000000000000000 0000000000000008 0000000000000000 c000000000c44200 
GPR28: c000000000f80028 0000000000000008 c000000000c85038 0000000000000002 
NIP [c00000000024a35c] .sysfs_create_file+0x1c/0x40
LR [c0000000004ee050] .device_create_file+0x20/0x40
Call Trace:
[c0000003fd9e77e0] [c0000003fd9e78a0] 0xc0000003fd9e78a0 (unreliable)
[c0000003fd9e7850] [c00000000083c9a4] .register_cpu_online+0x1d0/0x250
[c0000003fd9e7900] [c00000000083ca8c] .sysfs_cpu_notify+0x68/0x28c
[c0000003fd9e79b0] [c00000000083769c] .notifier_call_chain+0x9c/0x100
[c0000003fd9e7a50] [c0000000000a5878] .__cpu_notify+0x38/0x80
[c0000003fd9e7ad0] [c00000000083e124] ._cpu_up+0x10c/0x178
[c0000003fd9e7b90] [c00000000083e2c8] .cpu_up+0x138/0x164
[c0000003fd9e7c20] [c000000000ba46d0] .async_cpu_up+0x28/0x40
[c0000003fd9e7ca0] [c0000000000d81ec] .async_run_entry_fn+0xbc/0x1f0
[c0000003fd9e7d50] [c0000000000c7cbc] .process_one_work+0x19c/0x590
[c0000003fd9e7e10] [c0000000000c8618] .worker_thread+0x188/0x4b0
[c0000003fd9e7ed0] [c0000000000ce57c] .kthread+0xbc/0xd0
[c0000003fd9e7f90] [c000000000021448] .kernel_thread+0x54/0x70
Instruction dump:
7fa3eb78 ebe1fff8 eba1ffe8 7c0803a6 4e800020 2c230000 41820024 e8630030 
7c800074 7800d182 2fa30000 419e0014 <0b000000> 38a00002 4bfffebc e8630030 
---[ end trace 31fd0ba7d8756001 ]---
initcall .topology_init+0x0/0x1ac returned 0 after 0 usecs
calling  .pcibios_init+0x0/0xe8 @ 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware done
initcall .pcibios_init+0x0/0xe8 returned 0 after 0 usecs
calling  .add_system_ram_resources+0x0/0x140 @ 1
initcall .add_system_ram_resources+0x0/0x140 returned 0 after 0 usecs
calling  .__machine_initcall_powermac_pmac_i2c_create_platform_devices+0x0/0xc8 @ 1
initcall .__machine_initcall_powermac_pmac_i2c_create_platform_devices+0x0/0xc8 returned 0 after 0 usecs
calling  .opal_init+0x0/0x1cc @ 1
opal: Node not found
initcall .opal_init+0x0/0x1cc returned -19 after 0 usecs
calling  .__machine_initcall_pseries_ioei_init+0x0/0xa0 @ 1

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au