From: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
To: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>,
Suresh Siddha <suresh.b.siddha@intel.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>, Paul Turner <pjt@google.com>
Subject: Re: sched: Avoid SMT siblings in select_idle_sibling() if possible
Date: Thu, 23 Feb 2012 16:19:59 +0530 [thread overview]
Message-ID: <20120223104959.GA8454@linux.vnet.ibm.com> (raw)
In-Reply-To: <1329761661.6276.146.camel@marge.simpson.net>
* Mike Galbraith <efault@gmx.de> [2012-02-20 19:14:21]:
> > I was looking at this code due to vatsa wanting to do SD_BALANCE_WAKE.
>
> I really really need to find time to do systematic mainline testing.
>
> Enabling SD_BALANCE_WAKE used to be decidedly too expensive to consider.
> Maybe that has changed, but I doubt it. (general aside: testing with a
> bloated distro config is a big mistake)
I am seeing 2.6% _improvement_ in volanomark score by enabling SD_BALANCE_WAKE
at SMT/MC domains.
Machine : 2 Quad-core Intel X5570 CPU (H/T enabled)
Kernel : tip (HEAD at 6241cc8)
Java : OpenJDK 1.6.0_20
Volano : 2_9_0
Volano benchmark was run 4 times with and w/o SD_BALANCE_WAKE enabled in
SMT/MC domains.
Average score std. dev
SD_BALANCE_WAKE disabled 369459.750 4825.046
SD_BALANCE_WAKE enabled 379070.500 379070.5
I am going to try pipe benchmark next. Do you have suggestions for any other
benchmarks I should try to see the effect of SD_BALANCE_WAKE turned on in
SMT/MC domains?
- vatsa
next prev parent reply other threads:[~2012-02-23 11:11 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 9:46 sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2011-11-16 1:14 ` Suresh Siddha
2011-11-16 9:24 ` Mike Galbraith
2011-11-16 18:37 ` Suresh Siddha
2011-11-17 1:59 ` Mike Galbraith
2011-11-17 15:38 ` Mike Galbraith
2011-11-17 15:56 ` Peter Zijlstra
2011-11-17 16:38 ` Mike Galbraith
2011-11-17 17:36 ` Suresh Siddha
2011-11-18 15:14 ` Mike Galbraith
2011-11-18 15:17 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Mike Galbraith
2011-11-18 15:35 ` Peter Zijlstra
2011-11-18 17:34 ` Mike Galbraith
2011-11-22 14:17 ` Mike Galbraith
2011-11-22 14:18 ` [patch 1/7] " Mike Galbraith
2011-12-06 9:50 ` [tip:sched/core] sched: Use " tip-bot for Mike Galbraith
2011-11-22 14:20 ` [patch 2/7] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-12-06 20:20 ` [tip:sched/core] sched: Save " tip-bot for Mike Galbraith
2011-11-22 14:21 ` [patch 3/7] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2011-11-23 11:53 ` Peter Zijlstra
2011-11-23 12:06 ` Mike Galbraith
2011-11-23 14:48 ` Peter Zijlstra
2011-11-24 3:50 ` Mike Galbraith
2011-11-24 10:12 ` Peter Zijlstra
2011-11-25 6:39 ` Mike Galbraith
2011-12-06 9:51 ` [tip:sched/core] sched: Set " tip-bot for Mike Galbraith
2011-11-22 14:22 ` [patch 4/7] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-23 11:55 ` Peter Zijlstra
2011-11-23 12:09 ` Mike Galbraith
2011-11-23 12:27 ` Peter Zijlstra
2011-11-23 12:57 ` Mike Galbraith
2011-11-23 14:21 ` Mike Galbraith
2011-11-22 14:23 ` [patch 5/7] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-22 14:24 ` [patch 6/7] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-23 11:57 ` Peter Zijlstra
2011-11-23 12:35 ` Mike Galbraith
2011-11-22 14:26 ` [patch 7/7] sched: only use TTWU_QUEUE when waker/wakee CPUs do not share top level cache Mike Galbraith
2011-11-23 12:08 ` Peter Zijlstra
2011-11-18 15:39 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Hillf Danton
2011-11-18 15:18 ` [patch 2/6] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-18 15:19 ` [patch 3/6] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-18 15:36 ` Peter Zijlstra
2011-11-18 17:42 ` Mike Galbraith
2011-11-19 0:51 ` Van De Ven, Arjan
2011-11-19 4:15 ` Mike Galbraith
2011-11-18 15:20 ` [patch 4/6] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-18 15:22 ` [patch 5/6] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-11-18 15:23 ` [patch 6/6] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2012-02-20 14:41 ` sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2012-02-20 15:03 ` Srivatsa Vaddagiri
2012-02-20 18:25 ` Mike Galbraith
2012-02-21 0:06 ` Srivatsa Vaddagiri
2012-02-21 6:37 ` Mike Galbraith
2012-02-21 8:09 ` Srivatsa Vaddagiri
2012-02-20 18:14 ` Mike Galbraith
2012-02-20 18:15 ` Peter Zijlstra
2012-02-20 19:07 ` Peter Zijlstra
2012-02-21 5:43 ` Mike Galbraith
2012-02-21 8:32 ` Srivatsa Vaddagiri
2012-02-21 9:21 ` Mike Galbraith
2012-02-21 10:37 ` Peter Zijlstra
2012-02-21 14:58 ` Srivatsa Vaddagiri
2012-02-23 10:49 ` Srivatsa Vaddagiri [this message]
2012-02-23 11:19 ` Ingo Molnar
2012-02-23 12:18 ` Srivatsa Vaddagiri
2012-02-23 11:20 ` Srivatsa Vaddagiri
2012-02-23 11:26 ` Ingo Molnar
2012-02-23 11:32 ` Srivatsa Vaddagiri
2012-02-23 16:17 ` Ingo Molnar
2012-02-23 11:21 ` Mike Galbraith
2012-02-25 6:54 ` Srivatsa Vaddagiri
2012-02-25 8:30 ` Mike Galbraith
2012-02-27 22:11 ` Suresh Siddha
2012-02-28 5:05 ` Mike Galbraith
2011-11-17 19:08 ` Suresh Siddha
2011-11-18 15:12 ` Peter Zijlstra
2011-11-18 15:26 ` Mike Galbraith
2011-12-06 9:49 ` [tip:sched/core] sched: Clean up domain traversal in select_idle_sibling() tip-bot for Suresh Siddha
2011-11-18 23:40 ` [tip:sched/core] sched: Avoid SMT siblings in select_idle_sibling() if possible tip-bot for Peter Zijlstra
[not found] <1329764866.2293.376.camhel@twins>
2012-03-05 15:24 ` Srivatsa Vaddagiri
2012-03-06 9:14 ` Ingo Molnar
2012-03-06 10:03 ` Srivatsa Vaddagiri
2012-03-22 15:32 ` Srivatsa Vaddagiri
2012-03-23 6:38 ` Mike Galbraith
2012-03-26 8:29 ` Peter Zijlstra
2012-03-26 8:36 ` Peter Zijlstra
2012-03-26 17:35 ` Srivatsa Vaddagiri
2012-03-26 18:06 ` Peter Zijlstra
2012-03-27 13:56 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120223104959.GA8454@linux.vnet.ibm.com \
--to=vatsa@linux.vnet.ibm.com \
--cc=efault@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.