[U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM

[Wolfgang Denk <wd@denx.de>]

Dear Marek Vasut,

In message <1331797965-7415-1-git-send-email-marex@denx.de> you wrote:
> From: Marek Vasut <marek.vasut@gmail.com>
> 
> This command boots Linux zImage from where the zImage is loaded to. Passing
> initrd and fdt is supported.
> 
> Tested on i.MX28 based DENX M28EVK
> Tested on PXA270 based Voipac PXA270.
> 
> NOTE: This currently only supports ARM, but other architectures can be easily
> added by defining bootz_setup().
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Tom Warren <TWarren@nvidia.com>
> Cc: albert.u.boot at aribaud.net
> Cc: afleming at gmail.com,
> Cc: Simon Glass <sjg@chromium.org>,
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Nicolas Pitre <nico@fluxnic.net>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
>  README                   |    8 +++
>  arch/arm/lib/bootm.c     |   30 ++++++++++
>  common/cmd_bootm.c       |  141 +++++++++++++++++++++++++++++++++++++++++++---
>  include/config_cmd_all.h |    1 +
>  4 files changed, 171 insertions(+), 9 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hi there! This is just a note from me, to you, to tell you, the  per-
son  reading this note, that I can't think up any more famous quotes,
jokes, nor bizarre stories, so you may as well go home.