Re: building meta-ti + poky HOWTO?

[Denys Dmytriyenko <denis@denix.org>]

On Thu, Apr 05, 2012 at 06:40:15PM -0700, Russell Senior wrote:
> >>>>> "Russell" == Russell Senior <russell@personaltelco.net> writes:
> 
> Russell> [...] I have tried taking the pre-baked Angstrom image from here:
> 
> Russell>
> Russell> http://www.angstrom-distribution.org/demo/beaglebone/Angstrom-Cloud9-IDE-eglibc-ipk-v2012.02-core-beaglebone-2012.02.14.img.xz
> 
> Russell> (which works for me), and replacing the uImage on the vfat
> Russell> partition by copying over the existing one with one I built.
> Russell> That boots, but the rootfs isn't aligned (different
> Russell> kernel/module versions?).
> 
> With that in mind, I discovered that uEnv.txt had "quiet", so I tried
> booting without that and got some new information:
> 
>   Failed to start Journal Service                                        [FAILED]
>   See 'systemctl status systemd-journald.service' for details.                   
>   Started udev Coldplug all Devices                                      [  OK  ]
>   Started File System Check on Root Device                               [  OK  ]
>   Starting Remount Root FS...                                                    
>   Failed to start Remount Root FS                                        [FAILED]
>   See 'systemctl status remount-rootfs.service' for details.                     
>   Starting /tmp...                                                               
>   Starting Machine ID first boot configure...                                    
>   Starting Run pending postinsts...                                              
>   Failed to start /tmp                                                   [FAILED]
>   See 'systemctl status tmp.mount' for details.                                  
>   Dependency failed. Aborted start of Serial Getty on ttyO0              [ABORT]
>   Dependency failed. Aborted start of Getty on tty1                      [ABORT]
>   udevd[67]: timeout, giving up waiting for workers to finish
> 
> This looks like the same problem as here: 
> 
>   http://lists.linuxtogo.org/pipermail/angstrom-distro-devel/2012-March/005762.html
> 
> That was a month ago.  Why hasn't this been fixed?  I'm running a stock/very-recent checkout.

Russell,

It appears your kernel configuration may not have all the required options 
enabled to work properly with latest udev and systemd, according to this post:
http://lists.linuxtogo.org/pipermail/angstrom-distro-devel/2012-March/005793.html

As it was mentioned in the reply, enabling those options fixes the [FAILED] 
issues above with the Journal Service:
http://lists.linuxtogo.org/pipermail/angstrom-distro-devel/2012-March/005798.html

Also, please follow the rest of the thread for additional info:
http://thread.gmane.org/gmane.linux.distributions.angstrom.devel/6142

-- 
Denys