From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Mundt Date: Tue, 17 Apr 2012 07:38:22 +0000 Subject: Re: [PATCH 1/4] sh: sh4a: Change the specification method of IRQ to SCIx_IRQ_MUXED Message-Id: <20120417073822.GA25751@linux-sh.org> List-Id: References: <1334286843-3297-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> In-Reply-To: <1334286843-3297-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Fri, Apr 13, 2012 at 12:14:00PM +0900, Nobuhiro Iwamatsu wrote: > Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. > And change use to evt2irq(), without specifying the value of IRQ directly. > This is correction to the SH4A series. On Fri, Apr 13, 2012 at 12:14:01PM +0900, Nobuhiro Iwamatsu wrote: > Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. > And change use to evt2irq(), without specifying the value of IRQ directly. > This is correction to the SH4 series. On Fri, Apr 13, 2012 at 12:14:02PM +0900, Nobuhiro Iwamatsu wrote: > Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. > And change use to evt2irq(), without specifying the value of IRQ directly. > This is correction to the SH3 series. On Fri, Apr 13, 2012 at 12:14:03PM +0900, Nobuhiro Iwamatsu wrote: > Some SCIF devices specify the same IRQ. We can use SCIx_IRQ_MUXED for this. > This is correction to the SH2/SH2A series. All applied, thanks.