From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 20 Apr 2012 00:23:55 +0200 Subject: [U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 In-Reply-To: References: <20120416174633.GA7463@debian> <201204192245.21242.marex@denx.de> Message-ID: <201204200023.55991.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Ilya Averyanov, > 2012/4/20 Marek Vasut > > > Dear Gabriel Huau, > > > > > On Thu, Apr 19, 2012 at 10:08:47PM +0200, Marek Vasut wrote: > > > > Dear Gabriel Huau, > > > > > > > > > --- > > > > > > > > > > Changes for v2: > > > > > - Coding style cleanup > > > > > - Remove unnecessary files modification > > > > > - Remove unnecessary board configuration set > > > > > > > > > > Changes for v3: > > > > > - Coding style cleanup > > > > > - Move some macro definition from lowlevel_init.S > > > > > to a new header > > > > > - Remove some "magic bloat" with I/O board initialization > > > > > - Add a pll_delay and replace loop by it > > > > > - Somme cleanup in the configuration file > > > > > - Cancel modifications on an SoC specific header > > > > > - Add my name to copyright > > > > > > > > > > --- > > > > > > > > > > board/friendlyarm/mini2440/Makefile | 45 ++++++ > > > > > board/friendlyarm/mini2440/lowlevel_init.S | 76 ++++++++++ > > > > > board/friendlyarm/mini2440/mini2440.c | 139 > > > > > ++++++++++++++++++ board/friendlyarm/mini2440/mini2440.h | > > > > > 104 ++++++++++++++ boards.cfg | > > > > > 1 + > > > > > include/configs/mini2440.h | 215 > > > > > > > > > > ++++++++++++++++++++++++++++ 6 files changed, 580 insertions(+) > > > > > > > > > > create mode 100644 board/friendlyarm/mini2440/Makefile > > > > > create mode 100644 board/friendlyarm/mini2440/lowlevel_init.S > > > > > create mode 100644 board/friendlyarm/mini2440/mini2440.c > > > > > create mode 100644 board/friendlyarm/mini2440/mini2440.h > > > > > create mode 100644 include/configs/mini2440.h > > > > > > > > > > diff --git a/board/friendlyarm/mini2440/Makefile > > > > > b/board/friendlyarm/mini2440/Makefile new file mode 100644 > > > > > index 0000000..e8d68cb > > > > > --- /dev/null > > > > > +++ b/board/friendlyarm/mini2440/Makefile > > > > > @@ -0,0 +1,45 @@ > > > > > +# > > > > > +# (C) Copyright 2012 > > > > > +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. > > > > > +# > > > > > +# See file CREDITS for list of people who contributed to this > > > > > +# project. > > > > > +# > > > > > +# This program is free software; you can redistribute it and/or > > > > > +# modify it under the terms of the GNU General Public License as > > > > > +# published by the Free Software Foundation; either version 2 of > > > > > +# the License, or (at your option) any later version. > > > > > +# > > > > > +# This program is distributed in the hope that it will be useful, > > > > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > > > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > > > +# GNU General Public License for more details. > > > > > +# > > > > > +# You should have received a copy of the GNU General Public > > > > > License +# along with this program; if not, write to the Free > > > > > Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > > > > +# MA 02111-1307 USA > > > > > +# > > > > > + > > > > > +include $(TOPDIR)/config.mk > > > > > + > > > > > +LIB = $(obj)lib$(BOARD).o > > > > > + > > > > > +COBJS := mini2440.o > > > > > +SOBJS := lowlevel_init.o > > > > > + > > > > > +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) > > > > > +OBJS := $(addprefix $(obj),$(COBJS)) > > > > > +SOBJS := $(addprefix $(obj),$(SOBJS)) > > > > > + > > > > > +$(LIB): $(obj).depend $(OBJS) $(SOBJS) > > > > > + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) > > > > > + > > > > +###################################################################### > > > > > > > ### + > > > > > +# defines $(obj).depend target > > > > > +include $(SRCTREE)/rules.mk > > > > > + > > > > > +sinclude $(obj).depend > > > > > + > > > > +###################################################################### > > > > > > > ### diff --git a/board/friendlyarm/mini2440/lowlevel_init.S > > > > > b/board/friendlyarm/mini2440/lowlevel_init.S new file mode 100644 > > > > > index 0000000..f69a08c > > > > > --- /dev/null > > > > > +++ b/board/friendlyarm/mini2440/lowlevel_init.S > > > > > @@ -0,0 +1,76 @@ > > > > > +/* > > > > > + * Memory Setup stuff - taken from blob memsetup.S > > > > > + * > > > > > + * Copyright (C) 1999 2000 2001 Erik Mouw ( > > > > J.A.K.Mouw at its.tudelft.nl) > > > > > > > and + * Jan-Derk Bakker > > > > > (J.D.Bakker at its.tudelft.nl) + * > > > > > + * Modified for the Samsung SMDK2410 by > > > > > + * (C) Copyright 2002 > > > > > + * David Mueller, ELSOFT AG, > > > > > + * > > > > > + * (C) Copyright 2012 > > > > > + * Gabriel Huau > > > > > + * > > > > > + * See file CREDITS for list of people who contributed to this > > > > > + * project. > > > > > + * > > > > > + * This program is free software; you can redistribute it and/or > > > > > + * modify it under the terms of the GNU General Public License as > > > > > + * published by the Free Software Foundation; either version 2 of > > > > > + * the License, or (at your option) any later version. > > > > > + * > > > > > + * This program is distributed in the hope that it will be useful, > > > > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > > > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > > > + * GNU General Public License for more details. > > > > > + * > > > > > + * You should have received a copy of the GNU General Public > > > > > License + * along with this program; if not, write to the Free > > > > > Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > > > > + * MA 02111-1307 USA > > > > > + */ > > > > > + > > > > > +#include > > > > > +#include > > > > > +#include "mini2440.h" > > > > > + > > > > > +_TEXT_BASE: > > > > > + .word CONFIG_SYS_TEXT_BASE > > > > > + > > > > > +.globl lowlevel_init > > > > > +lowlevel_init: > > > > > + /* memory control configuration */ > > > > > + /* make r0 relative the current location so that it */ > > > > > + /* reads SMRDATA out of FLASH rather than memory ! */ > > > > > + ldr r0, =SMRDATA > > > > > + ldr r1, _TEXT_BASE > > > > > + sub r0, r0, r1 > > > > > + ldr r1, =BWSCON /* Bus Width Status Controller */ > > > > > + add r2, r0, #13*4 > > > > > +0: > > > > > + ldr r3, [r0], #4 > > > > > + str r3, [r1], #4 > > > > > + cmp r2, r0 > > > > > + bne 0b > > > > > + > > > > > + /* everything is fine now */ > > > > > + mov pc, lr > > > > > + > > > > > + .ltorg > > > > > +/* the literal pools origin */ > > > > > + > > > > > +SMRDATA: > > > > > + .word > > > > (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BW > > > > > > > SCO N<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) + .word > > > > ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_ > > > > > > > Tac p<<2)+(B0_PMC)) + .word > > > > ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_ > > > > > > > Tac p<<2)+(B1_PMC)) + .word > > > > ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_ > > > > > > > Tac p<<2)+(B2_PMC)) + .word > > > > ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_ > > > > > > > Tac p<<2)+(B3_PMC)) + .word > > > > ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_ > > > > > > > Tac p<<2)+(B4_PMC)) + .word > > > > ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_ > > > > > > > Tac p<<2)+(B5_PMC)) + > > > > > + .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) > > > > > + .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) > > > > > + .word > > > > > ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + > > > > > .word 0x32 > > > > > + .word 0x30 > > > > > + .word 0x30 > > > > > > > > What this undocumented stuff? > > > > > > SoC specific, I pasted it from smdk2410, it's for initialize the DRAM. > > > > Can't you init DRAM in some more fitting place? Also document this? > > > > > > > diff --git a/board/friendlyarm/mini2440/mini2440.c > > > > > b/board/friendlyarm/mini2440/mini2440.c new file mode 100644 > > > > > index 0000000..9ba8d39 > > > > > --- /dev/null > > > > > +++ b/board/friendlyarm/mini2440/mini2440.c > > > > > @@ -0,0 +1,139 @@ > > > > > +/* > > > > > + * (C) Copyright 2002 > > > > > + * Sysgo Real-Time Solutions, GmbH > > > > > + * Marius Groeger > > > > > + * > > > > > + * (C) Copyright 2002 > > > > > + * David Mueller, ELSOFT AG, > > > > > + * > > > > > + * (C) Copyright 2009 > > > > > + * Michel Pollet > > > > > + * > > > > > + * (C) Copyright 2012 > > > > > + * Gabriel Huau > > > > > + * > > > > > + * See file CREDITS for list of people who contributed to this > > > > > + * project. > > > > > + * > > > > > + * This program is free software; you can redistribute it and/or > > > > > + * modify it under the terms of the GNU General Public License as > > > > > + * published by the Free Software Foundation; either version 2 of > > > > > + * the License, or (at your option) any later version. > > > > > + * > > > > > + * This program is distributed in the hope that it will be useful, > > > > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > > > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > > > + * GNU General Public License for more details. > > > > > + * > > > > > + * You should have received a copy of the GNU General Public > > > > > License + * along with this program; if not, write to the Free > > > > > Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > > > > + * MA 02111-1307 USA > > > > > + */ > > > > > + > > > > > +#include > > > > > +#include > > > > > +#include > > > > > +#include > > > > > +#include "mini2440.h" > > > > > + > > > > > +#ifdef CONFIG_DRIVER_DM9000 > > > > > +#include > > > > > +#endif > > > > > + > > > > > +DECLARE_GLOBAL_DATA_PTR; > > > > > + > > > > > +static inline void pll_delay(unsigned long loops) > > > > > +{ > > > > > + __asm__ volatile ("1:\n" > > > > > + "subs %0, %1, #1\n" > > > > > + "bne 1b" : "=r" (loops) : "0" (loops)); > > > > > +} > > > > > + > > > > > +int arch_cpu_init(void) > > > > > +{ > > > > > + struct s3c24x0_clock_power * const clk_power = > > > > > + s3c24x0_get_base_clock_power(); > > > > > + > > > > > + /* to reduce PLL lock time, adjust the LOCKTIME register */ > > > > > + clk_power->locktime = 0xFFFFFF; > > > > > + clk_power->clkdivn = CLKDIVN_VAL; > > > > > + > > > > > + /* configure UPLL */ > > > > > + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + > > > > U_M_SDIV); > > > > > > > + /* some delay between MPLL and UPLL */ > > > > > + pll_delay(100000); > > > > > + > > > > > + /* configure MPLL */ > > > > > + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); > > > > > + > > > > > + /* some delay between MPLL and UPLL */ > > > > > + pll_delay(500000); > > > > > > > > You use udelay() below, do you need pll_delay() at all? > > > > > > Yes, because initialisation of PLL is done before timer_init(), so we > > > can't use udelay(). > > > > Maybe fix the timer driver? > > How fix timer driver if arch_cpu_init(void) call befor timer_init in > \arch\arm\lib\board.c:227 init_fnc_t *init_sequence[] = { Where did you get such a weird path? \arch\arm... ? btw you can always check some bit, if the timer is enabled, behave one way, otherwise, behave other way. > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +/* > > > > > + * Miscellaneous platform dependent initialisations > > > > > + */ > > > > > +int board_init(void) > > > > > +{ > > > > > + struct s3c24x0_clock_power * const clk_power = > > > > > + s3c24x0_get_base_clock_power(); > > > > > + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); > > > > > + > > > > > + /* to reduce PLL lock time, adjust the LOCKTIME register */ > > > > > + clk_power->locktime = 0xFFFFFF; > > > > > + clk_power->clkdivn = CLKDIVN_VAL; > > > > > + > > > > > + /* configure UPLL */ > > > > > + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + > > > > U_M_SDIV); > > > > > > > + /* some delay between MPLL and UPLL */ > > > > > + udelay(10); > > > > > + /* configure MPLL */ > > > > > + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); > > > > > + > > > > > + /* some delay between MPLL and UPLL */ > > > > > + udelay(8000); > > > > > + > > > > > + /* set up the I/O ports */ > > > > > + writel(0x007FFFFF, &gpio->gpacon); > > > > > + writel(0x00044555, &gpio->gpbcon); > > > > > + writel(0x000007FF, &gpio->gpbup); > > > > > + writel(0xAAAAAAAA, &gpio->gpccon); > > > > > + writel(0x0000FFFF, &gpio->gpcup); > > > > > + writel(0xAAAAAAAA, &gpio->gpdcon); > > > > > + writel(0x0000FFFF, &gpio->gpdup); > > > > > + writel(0xAAAAAAAA, &gpio->gpecon); > > > > > + writel(0x0000FFFF, &gpio->gpeup); > > > > > + writel(0x000055AA, &gpio->gpfcon); > > > > > + writel(0x000000FF, &gpio->gpfup); > > > > > + writel(0xFF95FFBA, &gpio->gpgcon); > > > > > + writel(0x0000FFFF, &gpio->gpgup); > > > > > + writel(0x002AFAAA, &gpio->gphcon); > > > > > + writel(0x000007FF, &gpio->gphup); > > > > > + > > > > > + /* adress of boot parameters */ > > > > > + gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR; > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +int dram_init(void) > > > > > +{ > > > > > + gd->ram_size = PHYS_SDRAM_1_SIZE; > > > > > + return 0; > > > > > +} > > > > > + > > > > > +int board_eth_init(bd_t *bis) > > > > > +{ > > > > > +#ifdef CONFIG_DRIVER_DM9000 > > > > > + return dm9000_initialize(bis); > > > > > +#else > > > > > + return 0; > > > > > +#endif > > > > > +} > > > > > + > > > > > +/* The sum of all part_size[]s must equal to the NAND size, i.e., > > > > > 0x4000000 */ +unsigned int dynpart_size[] = { 0x40000, 0x20000, > > > > > 0x500000, 0xffffffff, 0 }; +char *dynpart_names[] = { "u-boot", > > > > > "u-boot_env", "kernel", "rootfs", NULL }; diff --git > > > > > a/board/friendlyarm/mini2440/mini2440.h > > > > > b/board/friendlyarm/mini2440/mini2440.h new file mode 100644 > > > > > index 0000000..02197c8 > > > > > --- /dev/null > > > > > +++ b/board/friendlyarm/mini2440/mini2440.h > > > > > @@ -0,0 +1,104 @@ > > > > > +/* > > > > > + * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S > > > > > + * Copyright (C) 2002 Samsung Electronics SW.LEE > > > > > + */ > > > > > + > > > > > +#ifndef BOARD_LL_MINI2440_H > > > > > +#define BOARD_LL_MINI2440_H > > > > > + > > > > > +/* > > > > > + * PLL/Clock configuration > > > > > + */ > > > > > +/* FCLK = 405 MHz, HCLK = 101 MHz, PCLK = 50 MHz, UCLK = 48 MHz */ > > > > > +#define CLKDIVN_VAL 7 > > > > > +#define M_MDIV 0x7f > > > > > +#define M_PDIV 0x2 > > > > > +#define M_SDIV 0x1 > > > > > + > > > > > +#define U_M_MDIV 0x38 > > > > > +#define U_M_PDIV 0x2 > > > > > +#define U_M_SDIV 0x2 > > > > > + > > > > > +/* BWSCON */ > > > > > +#define BWSCON 0x48000000 > > > > > +#define DW8 (0x0) > > > > > +#define DW16 (0x1) > > > > > +#define DW32 (0x2) > > > > > +#define WAIT (0x1<<2) > > > > > +#define UBLB (0x1<<3) > > > > > + > > > > > +#define B1_BWSCON (DW32) > > > > > +#define B2_BWSCON (DW16) > > > > > +#define B3_BWSCON (DW16 + WAIT + UBLB) > > > > > +#define B4_BWSCON (DW16) > > > > > +#define B5_BWSCON (DW16) > > > > > +#define B6_BWSCON (DW32) > > > > > +#define B7_BWSCON (DW32) > > > > > + > > > > > +/* BANK0CON */ > > > > > +#define B0_Tacs 0x0 /* 0clk */ > > > > > +#define B0_Tcos 0x0 /* 0clk */ > > > > > +#define B0_Tacc 0x7 /* 14clk */ > > > > > +#define B0_Tcoh 0x0 /* 0clk */ > > > > > +#define B0_Tah 0x0 /* 0clk */ > > > > > +#define B0_Tacp 0x0 > > > > > +#define B0_PMC 0x0 /* normal */ > > > > > + > > > > > +/* BANK1CON */ > > > > > +#define B1_Tacs 0x0 /* 0clk */ > > > > > +#define B1_Tcos 0x0 /* 0clk */ > > > > > +#define B1_Tacc 0x7 /* 14clk */ > > > > > +#define B1_Tcoh 0x0 /* 0clk */ > > > > > +#define B1_Tah 0x0 /* 0clk */ > > > > > +#define B1_Tacp 0x0 > > > > > +#define B1_PMC 0x0 > > > > > + > > > > > +#define B2_Tacs 0x0 > > > > > +#define B2_Tcos 0x0 > > > > > +#define B2_Tacc 0x7 > > > > > +#define B2_Tcoh 0x0 > > > > > +#define B2_Tah 0x0 > > > > > +#define B2_Tacp 0x0 > > > > > +#define B2_PMC 0x0 > > > > > + > > > > > +#define B3_Tacs 0x0 /* 0clk */ > > > > > +#define B3_Tcos 0x3 /* 4clk */ > > > > > +#define B3_Tacc 0x7 /* 14clk */ > > > > > +#define B3_Tcoh 0x1 /* 1clk */ > > > > > +#define B3_Tah 0x0 /* 0clk */ > > > > > +#define B3_Tacp 0x3 /* 6clk */ > > > > > +#define B3_PMC 0x0 /* normal */ > > > > > + > > > > > +#define B4_Tacs 0x0 /* 0clk */ > > > > > +#define B4_Tcos 0x0 /* 0clk */ > > > > > +#define B4_Tacc 0x7 /* 14clk */ > > > > > +#define B4_Tcoh 0x0 /* 0clk */ > > > > > +#define B4_Tah 0x0 /* 0clk */ > > > > > +#define B4_Tacp 0x0 > > > > > +#define B4_PMC 0x0 /* normal */ > > > > > + > > > > > +#define B5_Tacs 0x0 /* 0clk */ > > > > > +#define B5_Tcos 0x0 /* 0clk */ > > > > > +#define B5_Tacc 0x7 /* 14clk */ > > > > > +#define B5_Tcoh 0x0 /* 0clk */ > > > > > +#define B5_Tah 0x0 /* 0clk */ > > > > > +#define B5_Tacp 0x0 > > > > > +#define B5_PMC 0x0 /* normal */ > > > > > + > > > > > +#define B6_MT 0x3 /* SDRAM */ > > > > > +#define B6_Trcd 0x1 > > > > > +#define B6_SCAN 0x1 /* 9bit */ > > > > > + > > > > > +#define B7_MT 0x3 /* SDRAM */ > > > > > +#define B7_Trcd 0x1 /* 3clk */ > > > > > +#define B7_SCAN 0x1 /* 9bit */ > > > > > + > > > > > +/* REFRESH parameter */ > > > > > +#define REFEN 0x1 /* Refresh enable */ > > > > > +#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto > > > > refresh */ > > > > > > > +#define Trp 0x0 /* 2clk */ > > > > > +#define Trc 0x3 /* 7clk */ > > > > > +#define Tchr 0x2 /* 3clk */ > > > > > +#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz */ > > > > > + > > > > > +#endif > > > > > diff --git a/boards.cfg b/boards.cfg > > > > > index 3cf75c3..93eeb3c 100644 > > > > > --- a/boards.cfg > > > > > +++ b/boards.cfg > > > > > @@ -61,6 +61,7 @@ mx1ads arm arm920t > > > > > - > > > > > > > > > > - scb9328 arm arm920t > > > > - > > > > > > > - imx cm4008 arm > > > > > > > > > > arm920t - - ks8695 cm41xx > > > > > > > > > > arm arm920t - - > > > > > ks8695 > > > > > > > > > > +mini2440 arm arm920t mini2440 > > > > > friendlyarm s3c24x0 VCMA9 arm > > > > arm920t > > > > > > > vcma9 mpl s3c24x0 smdk2410 > > > > > > > > > > arm arm920t - samsung s3c24x0 > > > > > omap1510inn arm arm925t - > > > > > ti diff --git a/include/configs/mini2440.h > > > > b/include/configs/mini2440.h > > > > > > > new file mode 100644 > > > > > index 0000000..a3f06d0 > > > > > --- /dev/null > > > > > +++ b/include/configs/mini2440.h > > > > > @@ -0,0 +1,215 @@ > > > > > +/* > > > > > + * (C) Copyright 2002 > > > > > + * Sysgo Real-Time Solutions, GmbH > > > > > + * Marius Groeger > > > > > + * Gary Jennejohn > > > > > + * David Mueller > > > > > + * > > > > > + * (C) Copyright 2009-2010 > > > > > + * Michel Pollet > > > > > + * > > > > > + * (C) Copyright 2012 > > > > > + * Gabriel Huau > > > > > + * > > > > > + * Configuation settings for the MINI2440 board. > > > > > + * > > > > > + * See file CREDITS for list of people who contributed to this > > > > > + * project. > > > > > + * > > > > > + * This program is free software; you can redistribute it and/or > > > > > + * modify it under the terms of the GNU General Public License as > > > > > + * published by the Free Software Foundation; either version 2 of > > > > > + * the License, or (at your option) any later version. > > > > > + * > > > > > + * This program is distributed in the hope that it will be useful, > > > > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > > > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > > > + * GNU General Public License for more details. > > > > > + * > > > > > + * You should have received a copy of the GNU General Public > > > > > License + * along with this program; if not, write to the Free > > > > > Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > > > > + * MA 02111-1307 USA > > > > > + */ > > > > > + > > > > > +#ifndef __CONFIG_H > > > > > +#define __CONFIG_H > > > > > + > > > > > +#define CONFIG_SYS_TEXT_BASE 0x0 > > > > > + > > > > > +/* > > > > > + * High Level Configuration Options > > > > > + */ > > > > > +#define CONFIG_ARM920T 1 /* This is an ARM920T > > > > > Core > > > > > > > > */ > > > > > > > > > +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C2440 > > > > SoC */ > > > > > > > +#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 > > > > SoC */ > > > > > > > +#define CONFIG_MINI2440 1 /* on a MIN2440 Board > > > > */ > > > > > > > + > > > > > +#define MACH_TYPE_MINI2440 1999 > > > > > +#define CONFIG_MACH_TYPE MACH_TYPE_MINI2440 > > > > > + > > > > > +/* > > > > > + * It is possible to have u-boot save it's environment in NOR, > > > > > however, + * reember it is incompatible with booting from NAND as > > > > > the NOR is not + * available at that point. So use this only if > > > > > you use nand as storage + * and will never boot from it > > > > > + */ > > > > > +#define CONFIG_MINI2440_NOR_ENV 1 > > > > > +/* allow use of frequencies over 405Mhz */ > > > > > +#define CONFIG_MINI2440_OVERCLOCK 1 > > > > > + > > > > > +/* > > > > > + * input clock of PLL > > > > > + */ > > > > > +/* MINI2440 has 12.0000MHz input clock */ > > > > > +#define CONFIG_SYS_CLK_FREQ 12000000 > > > > > +#define CONFIG_ARCH_CPU_INIT 1 /* for the initialization of PLL */ > > > > > + > > > > > +#define USE_920T_MMU 1 > > > > > +#define CONFIG_BAUDRATE 115200 > > > > > + > > > > > +/* > > > > > + * Size of malloc() pool > > > > > + */ > > > > > +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048*1024) > > > > > +/* size in bytes reserved for initial data */ > > > > > +#define CONFIG_GBL_DATA_SIZE 128 > > > > > + > > > > > +/* > > > > > + * Hardware drivers > > > > > + */ > > > > > +#define CONFIG_DRIVER_DM9000 1 > > > > > +#define CONFIG_DRIVER_DM9000_NO_EEPROM 1 > > > > > +#define CONFIG_DM9000_BASE > > > > > 0x20000300 +#define DM9000_IO CONFIG_DM9000_BASE > > > > > +#define DM9000_DATA (CONFIG_DM9000_BASE+4) > > > > > + > > > > > +/* > > > > > + * select serial console configuration > > > > > + */ > > > > > +#define CONFIG_S3C24X0_SERIAL > > > > > +#define CONFIG_SERIAL1 1 > > > > > + > > > > > +/* > > > > > + * allow to overwrite serial and ethaddr > > > > > + */ > > > > > +#define CONFIG_ENV_OVERWRITE > > > > > + > > > > > +/* > > > > > + * Command definition > > > > > + */ > > > > > +#include > > > > > + > > > > > +#define CONFIG_CMD_DHCP > > > > > +#define CONFIG_CMD_PORTIO > > > > > +#define CONFIG_CMD_REGINFO > > > > > +#define CONFIG_CMD_SAVES > > > > > + > > > > > +/* > > > > > + * Miscellaneous configurable options > > > > > + */ > > > > > +#define CONFIG_LONGHELP > > > > > +#define CONFIG_SYS_PROMPT "MINI2440 => " > > > > > +#define CONFIG_SYS_CBSIZE 256 > > > > > +#define CONFIG_SYS_PBSIZE > > > > > > > > (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) > > > > > > > > > +#define CONFIG_SYS_MAXARGS 32 > > > > > +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > > > > > + > > > > > +#define CONFIG_SYS_MEMTEST_START 0x30000000 > > > > > +#define CONFIG_SYS_MEMTEST_END 0x34000000 /* 64MB > > > > > in > > > > DRAM > > > > > > */ > > > > > > > > > + > > > > > +/* everything, incl board info, in Hz */ > > > > > +#undef CONFIG_CLKS_IN_HZ > > > > > + > > > > > +/* default load address */ > > > > > +#define CONFIG_SYS_LOAD_ADDR 0x32000000 > > > > > + > > > > > +/* boot parameters address */ > > > > > +#define CONFIG_BOOT_PARAM_ADDR 0x30000100 > > > > > + > > > > > +/* > > > > > + * the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need > > > > > + * it to wrap 100 times (total 1562500) to get 1 sec. > > > > > + */ > > > > > +#define CONFIG_SYS_HZ 1562500 > > > > > + > > > > > +/* > > > > > + * valid baudrates > > > > > + */ > > > > > +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, > > > > 57600, > > 115200 > > > > > > > } + > > > > > +/* > > > > > + * Stack sizes > > > > > + * The stack sizes are set up in start.S using the settings below > > > > > + */ > > > > > +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ > > > > > +#ifdef CONFIG_USE_IRQ > > > > > +#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ > > > > > +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ > > > > > +#endif > > > > > + > > > > > +/* > > > > > + * Physical Memory Map > > > > > + */ > > > > > +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank > > > > > of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* > > > > > SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE > > > > > (64*1024*1024) /* 64MB of DRAM */ +#define CONFIG_SYS_SDRAM_BASE > > > > > PHYS_SDRAM_1 > > > > > +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + > > > > 0x1000 > > > > > > - \ > > > > > > > > > + > > > > GENERATED_GBL_DATA_SIZE) > > > > > > > + > > > > > +/* > > > > > + * When booting from NAND, it is impossible to access the lowest > > > > > addresses + * due to the SteppingStone being in the way. Luckily > > > > > the NOR doesn't really + * care about the highest 16 bits of > > > > > address, so we set the controlers + * registers to go and poke > > > > > over there, instead. > > > > > + */ > > > > > +#define PHYS_FLASH_1 0x0 > > > > > +#define CONFIG_SYS_FLASH_BASE 0x0 > > > > > + > > > > > +/* > > > > > + * NOR FLASH organization > > > > > + * Now uses the standard CFI interface > > > > > + * FLASH and environment organization > > > > > + */ > > > > > +#define CONFIG_SYS_FLASH_CFI 1 > > > > > +#define CONFIG_FLASH_CFI_DRIVER 1 > > > > > +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT > > > > > +#define CONFIG_SYS_MONITOR_BASE 0x0 > > > > > +/* max number of memory banks */ > > > > > +#define CONFIG_SYS_MAX_FLASH_BANKS 1 > > > > > +/* 512 * 4096 sectors, or 32 * 64k blocks */ > > > > > +#define CONFIG_SYS_MAX_FLASH_SECT 512 > > > > > +#define CONFIG_FLASH_SHOW_PROGRESS 1 > > > > > + > > > > > +/* > > > > > + * u-boot environmnent > > > > > + */ > > > > > +#define CONFIG_BOOTDELAY 3 > > > > > +#define CONFIG_BOOTARGS "root=/dev/sdb1 > > > > console=ttySAC0,115200" > > > > > > > +#define CONFIG_NETMASK 255.255.255.0 > > > > > +#define CONFIG_IPADDR 192.168.0.2 > > > > > +#define CONFIG_SERVERIP 192.168.0.1 > > > > > +#define CONFIG_DOS_PARTITION 1 > > > > > +#define CONFIG_BOOTCOMMAND "tftp 0x32000000 uImage;bootm" > > > > > > > > DROP THIS! > > > > > > ok :-) > > > > > > > > + > > > > > +/* > > > > > + * Config for NOR flash > > > > > + */ > > > > > +#define CONFIG_ENV_IS_IN_FLASH 1 > > > > > +#define CONFIG_MY_ENV_OFFSET 0x40000 > > > > > +/* addr of environment */ > > > > > +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + > > > > CONFIG_MY_ENV_OFFSET) > > > > > > > +/* 16k Total Size of Environment Sector */ > > > > > +#define CONFIG_ENV_SIZE 0x4000 > > > > > + > > > > > +#define CONFIG_PREBOOT_OVERRIDE 1 > > > > > + > > > > > +/* ATAG configuration */ > > > > > +#define CONFIG_INITRD_TAG 1 > > > > > +#define CONFIG_SETUP_MEMORY_TAGS 1 > > > > > +#define CONFIG_CMDLINE_TAG 1 > > > > > +#define CONFIG_CMDLINE_EDITING 1 > > > > > +#define CONFIG_AUTO_COMPLETE 1 > > > > > + > > > > > +#endif /* __CONFIG_H */ > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot at lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot