From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755116Ab2DZJoi (ORCPT ); Thu, 26 Apr 2012 05:44:38 -0400 Received: from cam-admin0.cambridge.arm.com ([217.140.96.50]:34453 "EHLO cam-admin0.cambridge.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754807Ab2DZJoh (ORCPT ); Thu, 26 Apr 2012 05:44:37 -0400 Date: Thu, 26 Apr 2012 10:44:00 +0100 From: Catalin Marinas To: Yilu Mao Cc: "linux-kernel@vger.kernel.org" , "linux@arm.linux.org.uk" , "Baohua.Song@csr.com" , "santosh.shilimkar@ti.com" , "robherring2@gmail.com" , "linux-arm-kernel@lists.infradead.org" Subject: Re: [PATCH] ARM: cache-l2x0.c: save aux ctrl for resume in case that l2x0 is enabled before init Message-ID: <20120426094400.GD18136@arm.com> References: <1335235280-25148-1-git-send-email-ylmao@marvell.com> <20120424082810.GA9367@arm.com> <4F98D659.4030709@marvell.com> <20120426083554.GB18136@arm.com> <4F99148B.4020900@marvell.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4F99148B.4020900@marvell.com> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Apr 26, 2012 at 10:25:31AM +0100, Yilu Mao wrote: > On 04/26/2012 04:35 PM, Catalin Marinas wrote: > > On Thu, Apr 26, 2012 at 06:00:09AM +0100, Yilu Mao wrote: > >> On 04/24/2012 04:28 PM, Catalin Marinas wrote: > >>> On Tue, Apr 24, 2012 at 03:41:20AM +0100, Yilu Mao wrote: > >>>> + l2x0_saved_regs.aux_ctrl = aux; > >>>> + > >>>> aux&= aux_mask; > >>>> aux |= aux_val; > >>> > >>> I think that's the wrong place to save it, it should be after the > >>> masking was done. > >>> > >>> Anyway, if we cannot write this register in l2x0_init() because the L2 > >>> was enabled, do we expect the L2 to be disabled during resume? > >>> > >> Sorry, I don't think so. > >> This is the right place to save it because we must make sure the saved > >> aux_ctrl is the same as what it is set. > >> If we save it after masking was done, the saved value will be different > >> because we can't actually change the real setting. > > > > And since we can't actually change the real setting on the resume path, > > why do we need to save it anyway. Is your L2 cache disabled on the > > resume path but not on the cold boot one? > > We can't change L2 aux ctrl setting when do init because it has been > enabled. This is normally for the case where the kernel running in non-secure mode is not allowed to write the L2 aux ctrl register. Does this permission change with core idle? -- Catalin From mboxrd@z Thu Jan 1 00:00:00 1970 From: catalin.marinas@arm.com (Catalin Marinas) Date: Thu, 26 Apr 2012 10:44:00 +0100 Subject: [PATCH] ARM: cache-l2x0.c: save aux ctrl for resume in case that l2x0 is enabled before init In-Reply-To: <4F99148B.4020900@marvell.com> References: <1335235280-25148-1-git-send-email-ylmao@marvell.com> <20120424082810.GA9367@arm.com> <4F98D659.4030709@marvell.com> <20120426083554.GB18136@arm.com> <4F99148B.4020900@marvell.com> Message-ID: <20120426094400.GD18136@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Apr 26, 2012 at 10:25:31AM +0100, Yilu Mao wrote: > On 04/26/2012 04:35 PM, Catalin Marinas wrote: > > On Thu, Apr 26, 2012 at 06:00:09AM +0100, Yilu Mao wrote: > >> On 04/24/2012 04:28 PM, Catalin Marinas wrote: > >>> On Tue, Apr 24, 2012 at 03:41:20AM +0100, Yilu Mao wrote: > >>>> + l2x0_saved_regs.aux_ctrl = aux; > >>>> + > >>>> aux&= aux_mask; > >>>> aux |= aux_val; > >>> > >>> I think that's the wrong place to save it, it should be after the > >>> masking was done. > >>> > >>> Anyway, if we cannot write this register in l2x0_init() because the L2 > >>> was enabled, do we expect the L2 to be disabled during resume? > >>> > >> Sorry, I don't think so. > >> This is the right place to save it because we must make sure the saved > >> aux_ctrl is the same as what it is set. > >> If we save it after masking was done, the saved value will be different > >> because we can't actually change the real setting. > > > > And since we can't actually change the real setting on the resume path, > > why do we need to save it anyway. Is your L2 cache disabled on the > > resume path but not on the cold boot one? > > We can't change L2 aux ctrl setting when do init because it has been > enabled. This is normally for the case where the kernel running in non-secure mode is not allowed to write the L2 aux ctrl register. Does this permission change with core idle? -- Catalin