From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sarah Sharp Subject: Re: [RFC PATCH] usb/acpi: Add support usb port power off mechanism for device fixed on the motherboard Date: Thu, 10 May 2012 09:35:28 -0700 Message-ID: <20120510163528.GA32651@xanatos> References: <1336638838-6157-1-git-send-email-tianyu.lan@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Alan Stern Cc: Lan Tianyu , lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Thu, May 10, 2012 at 11:54:04AM -0400, Alan Stern wrote: > On Thu, 10 May 2012, Lan Tianyu wrote: > > > hi all: > > Currently, we are working on usb port power off mechanism. Our developing > > machine provides usb port power control (a vbus switch)via ACPI power resource. > > When the power resource turns off, usb port powers off and usb device loses > > power. From usb hub side, just like the device being unplugged. > > > > Since usb port power off will affect hot-plug and devices remote wakeup > > function, it should be careful to do that. > > We conclude three different situations for power off mechanism. > > (1) hard-wired port with device > > (2) hot-pluggable port without device > > (3) hot-pluggable port with device > > > > For hard-wired port, the device will not be removed physically. So we can > > power off it when device is suspended and remote wakeup is disabled without > > concerning with hot-plug. This patch is dedicated to this siutation. > > > > This patch is to provide usb acpi power control method and call them in the > > usb_port_suspend() and usb_port_resume() when port can be power off. When the > > usb port is in the power off state, usb core doesn't remove device which is > > attached to the port. The device is still on the system and user can access > > the device. > > Can you provide any examples where this would be useful? It won't end > up saving very much power (although on a laptop even a little bit might > help). Every little bit of power savings helps for the particular system that implements the USB port power off. For this particular platform, Intel is looking at the system as a whole and trying to eek out power savings where ever they can. A little power savings in one particular subsystem may not seem like a big deal, but when you look at the overall picture, the long tail adds up. Just trust me, I'm excited about this system. :) As for examples of where the port power off would be useful, think about a laptop with several internal ports. The customer can save some money by choosing not to purchase an internal USB bluetooth device. The OEM may have just one motherboard for those two choices, so the port that would have held the bluetooth device will be empty. In that case, we'll never see a USB device connect on that empty port, so we may as well power it down. If we can further power off the internal webcam port when the device is suspended, we can save more power. Another example is when a user walks away from their laptop with some USB devices plugged in. If userspace can somehow know when the system is idle (e.g. the screen blanks, the bluetooth/NFC radio no longer detects the person's phone, etc), we can power off unconnected and suspended external ports. The hypothesis is that some users may not care about USB device connects and disconnects when their system is idle. They really will only care that the changes get noticed when they start using their system. This breaks down for some users, of course. Arjan has several desktops under his desk that are always on, and he starts interacting with them by plugging in a USB mouse and keyboard. So obviously the "port power off on screen blank" policy might not work for him. It also won't work for servers, where no one connects a real monitor to the server for months, but server folks probably won't care about this mechanism because their power budget is so much larger. However, someone on an airplane, trying to eek out every mW out of their battery, would want to power off any external unconnected or suspended USB ports. The point is that whether a user wants to allow the ports to be powered off should be a userspace policy. That's why we export the sysfs file, so that desktop software can implement whatever their customers want. Personally, I would want a checkbox in the Gnome display settings that says "Power off USB ports on screen blank". > > introduce three port's states. > > > > USB_PORT_POWER_STATE_ON > > USB_PORT_WAITING_FOR_CONNECTION > > USB_PORT_POWER_STATE_OFF > > > > "on" > > port power on > > > > "waiting for connection" > > port power on but hub port has not detected the device or detect event has > > not been processed. > > This state is not needed. > > > "off" > > port power off > > > > At first, port's state is "on". When the device is suspended, power off the port and > > set port's state to "off". After the port powering off, the usb hub will detect a > > connection change event. Normally, the device will be removed with regarding as being > > unplugged. But in the power off mechanism, the device is still on the port and user > > can still access the device. So ignore the event. > > > > When the device is resumed, turn on the power resource and set port's state to > > "waiting for connection". After the port powering on, the usb hub will detect a > > connection change event which originally means a device plugged in and previous > > device will be removed. But in the power offmechanism, the device is not changed > > and so ignore the event. When port's state is "waiting for connection", receive > > an event "connection" and the port's connection state is on. This means the usb > > the device is detected by usb hub again after powering on port. Set port's state > > to "on". > > > > "on" > > | > > "off" > > | > > "waiting for connection" > > | > > "on" > > > > "waiting for connection" state is to avoid device to being removed. > > Why would the device be removed? When we turn the power back on, we'll get a connect status change bit set. We don't want the USB core to misinterpret that bit and try to logically disconnect the device attached to the port. > > If set to "on" after powering on, the connection event may not be processed at that > > time. When it is processed, the port's state has been "on" and the device will be > > removed. So introduce "waiting for connection" state. > > Instead you should simply delay setting the state back to "on" until > the device has connected. What if the external device was suspended, we power off the port, and then the user yanks the device while it was suspended? A device may never connect in that case. > > We also have a proposal to add sys file for each port to control port power off > > under usb hub sys directory. If the port's power off is supported by platform, > > create a sys file e.g "port1_power" for port one. Echo "on" to "port1_power" is > > to not allow port to be power off. Echo "auto" to "port1_power" is to power off > > port if possible. > > > > Different type ports have different default values. > > (1) hard-wired port with device "auto" > > (2) hot-pluggable port without device "on" > > (3) hot-pluggable port with device "on" > > > > Add member port_power_control, can_power_off to struct usb_hub_port. port_power_control > > records user choice. Can_power_off means the platform and device support to power off. > > When a device is attached, check whether port can be power off if yes set can_power_off > > to true. When device driver is load, the driver also can set value to can_power_off. When > > That's no good. What happens if the driver sets the value to false and > then the driver is unloaded? Or the probe fails... > > try to power off port, can_power_off and port_power_control should be taken into account. > > Only when these two members are set to true, the port could be power off. > > > > sys file operation > > port with device > > port1_power "auto" => "on" or "on" => "auto" implement > > pm_runtime_get_syn(udev) > > port_power_control = "auto" or "on" > > pm_runtime_put_syn(udev) > > > > port without device > > port can power on or power power off directly. > > We have no code for powering off ports that don't have a device. If > you did power off such a port, it would not be able to detect when a > device was plugged in. > > > Suggestion and comments more welcome. > > Your code style for continuation lines is wrong. Continuation lines > should be indented more than one tab stop -- otherwise they look like > regular lines in an inner block. Let me know if you have any more questions about the mechanisms or policy we're trying to set up. Tianyu has been creating these patches, but I've tried to provide some advice to him along the way. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html