From mboxrd@z Thu Jan 1 00:00:00 1970 From: grant.likely@secretlab.ca (Grant Likely) Date: Thu, 17 May 2012 15:23:53 -0600 Subject: [PATCH 7/7] MMC: mmci: Add required documentation for Device Tree bindings In-Reply-To: <1334325909-5779-8-git-send-email-lee.jones@linaro.org> References: <1334325909-5779-1-git-send-email-lee.jones@linaro.org> <1334325909-5779-8-git-send-email-lee.jones@linaro.org> Message-ID: <20120517212353.0F9E53E0621@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 13 Apr 2012 15:05:09 +0100, Lee Jones wrote: > This provides full documentation detailing each compulsory, > optional and device (variant) specific properties available > for use within the MMCI Device Tree. > > Signed-off-by: Lee Jones Acked-by: Grant Likely Should be merged with the mmc driver code changes. g. > --- > Documentation/devicetree/bindings/mmc/mmci.txt | 19 +++++++++++++++++++ > 1 files changed, 19 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/mmci.txt > > diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt > new file mode 100644 > index 0000000..14a81d5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/mmci.txt > @@ -0,0 +1,19 @@ > +* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 > + > +The ARM PrimeCell MMCI PL180 and PL181 provides and interface for > +reading and writing to MultiMedia and SD cards alike. > + > +Required properties: > +- compatible : contains "arm,pl18x", "arm,primecell". > +- reg : contains pl18x registers and length. > +- interrupts : contains the device IRQ(s). > +- arm,primecell-periphid : contains the PrimeCell Peripheral ID. > + > +Optional properties: > +- wp-gpios : contains any write protect (ro) gpios > +- cd-gpios : contains any card detection gpios > +- cd-inverted : indicates whether the cd gpio is inverted > +- max-frequency : contains the maximum operating frequency > +- bus-width : number of data lines, can be <1>, <4>, or <8> > +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable > +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable > -- > 1.7.9.1 > -- Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd.