All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Stefan Lippers-Hollmann" <s.L-H@gmx.de>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: Nix <nix@esperi.org.uk>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: 3.4.x regression: rtl8169: frequent resets
Date: Fri, 29 Jun 2012 13:50:35 +0200	[thread overview]
Message-ID: <201206291350.41133.s.L-H@gmx.de> (raw)
In-Reply-To: <201206290131.49150.s.L-H@gmx.de>

[-- Attachment #1: Type: Text/Plain, Size: 4427 bytes --]

Hi

On Friday 29 June 2012, Stefan Lippers-Hollmann wrote:
> On Thursday 28 June 2012, Francois Romieu wrote:
> > Nix <nix@esperi.org.uk> :
> > > I recently upgraded from 3.3.x to 3.4.4, and am now experiencing
> > > networking problems with my desktop box's r8169 card. The symptoms are
> > > that all traffic ceases for five to ten seconds, then the card appears
> > > to reset and everything is back to normal -- until it happens again. It
> > > can happen quite a lot:
> > 
> > Can you try and revert 036dafa28da1e2565a8529de2ae663c37b7a0060 ?
> > 
> > I would welcome a complete dmesg including the XID line from the
> > r8169 driver.

Full gzipped messages/ kern.log attached (unfortunately he rebooted to 
quickly for a regular dmesg).

[    0.573645] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.573930] r8169 0000:04:00.0: eth0: RTL8168d/8111d at 0xffffc90000c72000, 00:24:1d:72:7c:75, XID 081000c0 IRQ 44
[    0.573933] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.573953] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.574093] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[    0.574213] r8169 0000:05:00.0: eth1: RTL8168d/8111d at 0xffffc90000c6e000, 00:24:1d:72:7c:77, XID 081000c0 IRQ 45
[    0.574217] r8169 0000:05:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[…]
[   20.872579] r8169 0000:04:00.0: eth0: link down
[   20.872594] r8169 0000:04:00.0: eth0: link down
[   20.873162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.945479] NET: Registered protocol family 17
[   22.516769] r8169 0000:04:00.0: eth0: link up
[   22.517670] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.996741] ip_tables: (C) 2000-2006 Netfilter Core Team
[   26.091554] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[…]
[14454.544994] ------------[ cut here ]------------
[14454.545004] WARNING: at /tmp/buildd/linux-aptosid-3.4/debian/build/source_amd64_none/net/sched/sch_generic.c:256 dev_watchdog+0xe9/0x15c()
[14454.545008] Hardware name: EX58-UD5
[14454.545010] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[14454.545013] Modules linked in: rfcomm bnep cpufreq_powersave cpufreq_stats cpufreq_conservative binfmt_misc xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables af_packet hfsplus fuse nls_utf8 nls_cp437 vfat fat jfs it87 dm_crypt dm_mod kvm_intel kvm adt7475 hwmon_vid nouveau snd_hda_codec_realtek coretemp video ttm drm_kms_helper drm snd_hda_intel power_supply snd_hda_codec snd_hwdep snd_pcm snd_page_alloc i2c_i801 i2c_algo_bit iTCO_wdt i7core_edac snd_seq iTCO_vendor_support microcode snd_seq_device edac_core i2c_core mxm_wmi btusb snd_timer snd bluetooth evdev pcspkr rfkill acpi_cpufreq soundcore mperf button processor wmi ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic usbhid pata_acpi hid sd_mod crc_t10dif crc32c_intel pata_jmicron uhci_hcd ahci libahci libata scsi_mod r8169 mii ehci_hcd usbcore usb_common [last unloaded: scsi_wait_scan]
[14454.545100] Pid: 4245, comm: iceape-bin Not tainted 3.4-4.slh.1-aptosid-amd64 #1
[14454.545103] Call Trace:
[14454.545105]  <IRQ>  [<ffffffff810332f6>] ? warn_slowpath_common+0x76/0x8a
[14454.545116]  [<ffffffff810333a2>] ? warn_slowpath_fmt+0x45/0x4a
[14454.545121]  [<ffffffff8127546a>] ? netif_tx_lock+0x67/0x7a
[14454.545127]  [<ffffffff812755b3>] ? dev_watchdog+0xe9/0x15c
[14454.545133]  [<ffffffff81020f2d>] ? __default_send_IPI_dest_field.constprop.0+0x38/0x4d
[14454.545139]  [<ffffffff8103c332>] ? run_timer_softirq+0x153/0x1e3
[14454.545145]  [<ffffffff8100f389>] ? paravirt_read_tsc+0x5/0x8
[14454.545150]  [<ffffffff81037f6b>] ? __do_softirq+0x92/0x126
[14454.545154]  [<ffffffff810202e2>] ? lapic_next_event+0xd/0x11
[14454.545160]  [<ffffffff813231dc>] ? call_softirq+0x1c/0x30
[14454.545164]  [<ffffffff8100ae23>] ? do_softirq+0x3a/0x77
[14454.545168]  [<ffffffff8103824b>] ? irq_exit+0x49/0xb1
[14454.545172]  [<ffffffff81020672>] ? smp_apic_timer_interrupt+0x74/0x82
[14454.545176]  [<ffffffff8132288a>] ? apic_timer_interrupt+0x6a/0x70
[14454.545179]  <EOI>  [<ffffffff81321df9>] ? system_call_fastpath+0x16/0x1b
[14454.545185] ---[ end trace a37b096a01814f14 ]---
[14454.549925] r8169 0000:04:00.0: eth0: link up
[14472.536356] r8169 0000:04:00.0: eth0: link up

Regards
	Stefan Lippers-Hollmann

[-- Attachment #2: messages.gz --]
[-- Type: application/x-gzip, Size: 14397 bytes --]

[-- Attachment #3: kern.log.gz --]
[-- Type: application/x-gzip, Size: 18217 bytes --]

  parent reply	other threads:[~2012-06-29 11:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-28 16:15 3.4.x regression: rtl8169: frequent resets Nix
2012-06-28 19:30 ` Francois Romieu
2012-06-28 21:12   ` Nix
2012-06-28 22:23     ` Francois Romieu
2012-06-28 23:10       ` Nix
2012-06-28 23:31   ` Stefan Lippers-Hollmann
2012-06-28 23:42     ` Nix
2012-06-29 11:50     ` Stefan Lippers-Hollmann [this message]
2012-07-02  0:43   ` Stefan Lippers-Hollmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201206291350.41133.s.L-H@gmx.de \
    --to=s.l-h@gmx.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nix@esperi.org.uk \
    --cc=romieu@fr.zoreil.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.