From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Thu, 5 Jul 2012 10:40:47 +0200 Subject: [U-Boot] Pull request for u-boot-marvell.git In-Reply-To: References: <4F3576CA.7050408@aribaud.net> Message-ID: <20120705104047.72b3fbaf@aari01-12> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Prafulla, On Tue, 3 Jul 2012 04:59:21 -0700, Prafulla Wadaskar wrote: > Dear Albert > > Please kindly pull > The following changes since commit > 3e0cac6b5158b22248f57cdf7769bf8d610fec5e: Rajeshwari Shinde (1): > EXYNOS: SMDK5250: Enable the pinmux setup > > are available in the git repository at: > > u-boot-marvell.git ..BRANCH.NOT.VERIFIED.. Seems the branch was not pushed at time of pull request... And then current marvell master has one more commit than what's listed below. Can you re-issue a (rebased and) updated pull request? Thanks in advance. > Holger Brunck (7): > arm/km: add board type to boards.cfg > arm/km: add piggy mac adress offset for mgcoge3un > arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE > arm/km: use ARRAY_SIZE macro > arm/km: fix wrong comment in SDRAM config for mgcoge3un > arm/km: change maintainer for mgcoge3un > arm/km: remove CONFIG_RESET_PHY_R > > Luka Perkov (1): > kwboot: boot kirkwood SoCs over a serial link > > Michael Walle (4): > lib: add rand() function > net: use common rand()/srand() functions > net: add helper to generate random mac address > Kirkwood: add lschlv2 and lsxhl board support > > Simon Guinot (3): > lacie_kw: fix SDRAM banks number for net2big_v2 > lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 > ARM: don't probe PHY address for LaCie boards > > Valentin Longchamp (9): > arm/km: enable mii cmd > km_arm: use filesize for erase in update command > kirkwood: add save functionality kirkwood_mpp_conf function > kirkwood: fix calls to kirkwood_mpp_conf > kw_spi: backup and reset the MPP of the chosen CS pin > kw_spi: support spi_claim/release_bus functions > kw_spi: add weak functions board_spi_claim/release_bus > arm/kirkwood: protect the ENV_SPI #defines > arm/km: use spi claim bus to switch between SPI and NAND > > MAINTAINERS | 7 +- > arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 10 +- > arch/arm/include/asm/arch-kirkwood/config.h | 12 +- > arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +- > arch/arm/include/asm/arch-kirkwood/spi.h | 11 + > board/LaCie/common/common.c | 23 +- > board/LaCie/common/common.h | 2 +- > board/LaCie/edminiv2/edminiv2.c | 2 +- > board/LaCie/net2big_v2/net2big_v2.c | 4 +- > board/LaCie/netspace_v2/netspace_v2.c | 4 +- > board/Marvell/dreamplug/dreamplug.c | 2 +- > board/Marvell/guruplug/guruplug.c | 2 +- > board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- > board/Marvell/openrd/openrd.c | 2 +- > board/Marvell/rd6281a/rd6281a.c | 2 +- > board/Marvell/sheevaplug/sheevaplug.c | 2 +- > board/Seagate/dockstar/dockstar.c | 2 +- > board/buffalo/lsxl/Makefile | 44 ++ > board/buffalo/lsxl/kwbimage-lschl.cfg | 229 +++++++ > board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 +++++++ > board/buffalo/lsxl/lsxl.c | 283 +++++++++ > board/buffalo/lsxl/lsxl.h | 75 +++ > board/cloudengines/pogo_e02/pogo_e02.c | 2 +- > board/d-link/dns325/dns325.c | 2 +- > board/keymile/km_arm/km_arm.c | 48 +-- > board/keymile/km_arm/kwbimage-memphis.cfg | 2 +- > board/raidsonic/ib62x0/ib62x0.c | 2 +- > boards.cfg | 6 +- > doc/kwboot.1 | 84 +++ > drivers/spi/kirkwood_spi.c | 64 ++- > include/common.h | 10 + > include/configs/km/km_arm.h | 15 +- > include/configs/km_kirkwood.h | 4 +- > include/configs/lacie_kw.h | 6 +- > include/configs/lsxl.h | 182 ++++++ > include/configs/mgcoge3un.h | 1 + > include/net.h | 17 + > lib/Makefile | 5 +- > lib/rand.c | 48 ++ > net/Makefile | 2 - > net/eth.c | 22 + > net/link_local.c | 7 +- > net/net_rand.c | 68 -- > net/net_rand.h | 31 +- > tools/Makefile | 6 + > tools/kwboot.c | 742 > +++++++++++++++++++++++ 46 files changed, 2143 insertions(+), 184 > deletions(-) create mode 100644 board/buffalo/lsxl/Makefile > create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg > create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg > create mode 100644 board/buffalo/lsxl/lsxl.c > create mode 100644 board/buffalo/lsxl/lsxl.h > create mode 100644 doc/kwboot.1 > create mode 100644 include/configs/lsxl.h > create mode 100644 lib/rand.c > delete mode 100644 net/net_rand.c > create mode 100644 tools/kwboot.c > > Regards... > Prafulla . . . > Amicalement, -- Albert.