All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator
@ 2012-06-28 10:20 Johan Hovold
  2012-06-28 10:20 ` [PATCH 1/2] " Johan Hovold
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Johan Hovold @ 2012-06-28 10:20 UTC (permalink / raw)
  To: Samuel Ortiz
  Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel,
	Johan Hovold

These patches (against v3.5-rc4) add support for enabling the external 32-kHz
oscillator input in tps6591x devices. Depending on boot-mode, the internal
RC-oscillator may be used by default and the external crystal-oscillator input
must be enabled by clearing a flag in the device-control register.

These patches are needed in order to get an accurate system clock on boards
such as the Craneboard.

Thanks,
Johan

Johan Hovold (2):
  mfd: tps65910: add support for enabling external 32-kHz oscillator
  mfd: tps65910: add device-tree entry to enable external 32-kHz
    oscillator

 Documentation/devicetree/bindings/mfd/tps65910.txt |    4 ++-
 drivers/mfd/tps65910.c                             |   24 +++++++++++++++++++-
 include/linux/mfd/tps65910.h                       |    1 +
 3 files changed, 27 insertions(+), 2 deletions(-)

-- 
1.7.8.6


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH 1/2] mfd: tps65910: add support for enabling external 32-kHz oscillator
  2012-06-28 10:20 [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator Johan Hovold
@ 2012-06-28 10:20 ` Johan Hovold
  2012-06-28 10:20 ` [PATCH 2/2] mfd: tps65910: add device-tree entry to enable " Johan Hovold
  2012-07-05 15:23   ` Samuel Ortiz
  2 siblings, 0 replies; 8+ messages in thread
From: Johan Hovold @ 2012-06-28 10:20 UTC (permalink / raw)
  To: Samuel Ortiz
  Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel,
	Johan Hovold

Add flag to platform data to enable external 32-kHz crystal oscillator
(or square wave) input.

The tps6591x can use either an internal 32-kHz RC oscillator or an
external crystal (or square wave) to generate the 32-kHz clock.

The default setting depends on the selected boot mode. In boot mode 00
the internal RC oscillator is used at power-on, but the external crystal
oscillator (or square wave) can be enabled by clearing the ck32k_ctrl
flag in the device control register.

Note that there is no way to switch from the external crystal oscillator
to the internal RC oscillator.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
 drivers/mfd/tps65910.c       |   21 ++++++++++++++++++++-
 include/linux/mfd/tps65910.h |    1 +
 2 files changed, 21 insertions(+), 1 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index be9e07b..b0526b7d 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -68,6 +68,25 @@ static const struct regmap_config tps65910_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+static int __devinit tps65910_misc_init(struct tps65910 *tps65910,
+					struct tps65910_board *pmic_pdata)
+{
+	struct device *dev = tps65910->dev;
+	int ret;
+
+	if (pmic_pdata->en_ck32k_xtal) {
+		ret = tps65910_reg_clear_bits(tps65910,
+						TPS65910_DEVCTRL,
+						DEVCTRL_CK32K_CTRL_MASK);
+		if (ret < 0) {
+			dev_err(dev, "clear ck32k_ctrl failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int __devinit tps65910_sleepinit(struct tps65910 *tps65910,
 		struct tps65910_board *pmic_pdata)
 {
@@ -243,7 +262,7 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 	init_data->irq_base = pmic_plat_data->irq_base;
 
 	tps65910_irq_init(tps65910, init_data->irq, init_data);
-
+	tps65910_misc_init(tps65910, pmic_plat_data);
 	tps65910_sleepinit(tps65910, pmic_plat_data);
 
 	return ret;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index dd8dc0a..a989d2b 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -807,6 +807,7 @@ struct tps65910_board {
 	int irq_base;
 	int vmbch_threshold;
 	int vmbch2_threshold;
+	bool en_ck32k_xtal;
 	bool en_dev_slp;
 	struct tps65910_sleep_keepon_data *slp_keepon;
 	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
-- 
1.7.8.6


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH 2/2] mfd: tps65910: add device-tree entry to enable external 32-kHz oscillator
  2012-06-28 10:20 [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator Johan Hovold
  2012-06-28 10:20 ` [PATCH 1/2] " Johan Hovold
@ 2012-06-28 10:20 ` Johan Hovold
  2012-07-05 15:23   ` Samuel Ortiz
  2 siblings, 0 replies; 8+ messages in thread
From: Johan Hovold @ 2012-06-28 10:20 UTC (permalink / raw)
  To: Samuel Ortiz
  Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel,
	Johan Hovold

Add device-tree entry to enable external 32-kHz crystal oscillator
input.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
 Documentation/devicetree/bindings/mfd/tps65910.txt |    4 +++-
 drivers/mfd/tps65910.c                             |    3 +++
 2 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 645f5eaa..0f5d9b7 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -29,6 +29,8 @@ Optional properties:
   comparator. (see VMBCH_VSEL in TPS65910 datasheet)
 - ti,vmbch2-threshold: (tps65911) main battery discharged threshold
   comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+  in TPS6591X datasheet)
 - ti,en-gpio-sleep: enable sleep control for gpios
   There should be 9 entries here, one for each gpio.
 
@@ -53,7 +55,7 @@ Example:
 
 		ti,vmbch-threshold = 0;
 		ti,vmbch2-threshold = 0;
-
+		ti,en-ck32k-xtal;
 		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
 
 		regulators {
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index b0526b7d..3f27ea1 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -194,6 +194,9 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
 	else if (*chip_id == TPS65911)
 		dev_warn(&client->dev, "VMBCH2-Threshold not specified");
 
+	prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
+	board_info->en_ck32k_xtal = prop;
+
 	board_info->irq = client->irq;
 	board_info->irq_base = -1;
 
-- 
1.7.8.6


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator
@ 2012-07-05 15:23   ` Samuel Ortiz
  0 siblings, 0 replies; 8+ messages in thread
From: Samuel Ortiz @ 2012-07-05 15:23 UTC (permalink / raw)
  To: Johan Hovold; +Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel

Hi Johan,

On Thu, Jun 28, 2012 at 12:20:20PM +0200, Johan Hovold wrote:
> These patches (against v3.5-rc4) add support for enabling the external 32-kHz
> oscillator input in tps6591x devices. Depending on boot-mode, the internal
> RC-oscillator may be used by default and the external crystal-oscillator input
> must be enabled by clearing a flag in the device-control register.
> 
> These patches are needed in order to get an accurate system clock on boards
> such as the Craneboard.
> 
> Thanks,
> Johan
> 
> Johan Hovold (2):
>   mfd: tps65910: add support for enabling external 32-kHz oscillator
>   mfd: tps65910: add device-tree entry to enable external 32-kHz
>     oscillator
Both patches applied, although the misc_init() naming is quite vague. If you
can come up with a follow up patch for a better name, I'll take it.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator
@ 2012-07-05 15:23   ` Samuel Ortiz
  0 siblings, 0 replies; 8+ messages in thread
From: Samuel Ortiz @ 2012-07-05 15:23 UTC (permalink / raw)
  To: Johan Hovold
  Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring

Hi Johan,

On Thu, Jun 28, 2012 at 12:20:20PM +0200, Johan Hovold wrote:
> These patches (against v3.5-rc4) add support for enabling the external 32-kHz
> oscillator input in tps6591x devices. Depending on boot-mode, the internal
> RC-oscillator may be used by default and the external crystal-oscillator input
> must be enabled by clearing a flag in the device-control register.
> 
> These patches are needed in order to get an accurate system clock on boards
> such as the Craneboard.
> 
> Thanks,
> Johan
> 
> Johan Hovold (2):
>   mfd: tps65910: add support for enabling external 32-kHz oscillator
>   mfd: tps65910: add device-tree entry to enable external 32-kHz
>     oscillator
Both patches applied, although the misc_init() naming is quite vague. If you
can come up with a follow up patch for a better name, I'll take it.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH] mfd: add tps65910 32-kHz-crystal-input init
  2012-07-05 15:23   ` Samuel Ortiz
  (?)
@ 2012-07-11 13:44   ` Johan Hovold
  2012-07-16 13:43       ` Samuel Ortiz
  -1 siblings, 1 reply; 8+ messages in thread
From: Johan Hovold @ 2012-07-11 13:44 UTC (permalink / raw)
  To: Samuel Ortiz
  Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel,
	Johan Hovold

Replace tps65910_misc_init with a dedicated init function for the
32-kHz-crystal input.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
---

Hi Samuel,

How about something like this? My thought with misc_init was that it could be
extended should more simple initialisation like for the ck32k_xtal need to be
done, but perhaps it's cleaner to stick with dedicated init functions
through-out. At least for now.

Thanks,
Johan


 drivers/mfd/tps65910.c |   19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 3f27ea1..1c56379 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -68,20 +68,19 @@ static const struct regmap_config tps65910_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
-static int __devinit tps65910_misc_init(struct tps65910 *tps65910,
+static int __devinit tps65910_ck32k_init(struct tps65910 *tps65910,
 					struct tps65910_board *pmic_pdata)
 {
-	struct device *dev = tps65910->dev;
 	int ret;
 
-	if (pmic_pdata->en_ck32k_xtal) {
-		ret = tps65910_reg_clear_bits(tps65910,
-						TPS65910_DEVCTRL,
+	if (!pmic_pdata->en_ck32k_xtal)
+		return 0;
+
+	ret = tps65910_reg_clear_bits(tps65910, TPS65910_DEVCTRL,
 						DEVCTRL_CK32K_CTRL_MASK);
-		if (ret < 0) {
-			dev_err(dev, "clear ck32k_ctrl failed: %d\n", ret);
-			return ret;
-		}
+	if (ret < 0) {
+		dev_err(tps65910->dev, "clear ck32k_ctrl failed: %d\n", ret);
+		return ret;
 	}
 
 	return 0;
@@ -265,7 +264,7 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 	init_data->irq_base = pmic_plat_data->irq_base;
 
 	tps65910_irq_init(tps65910, init_data->irq, init_data);
-	tps65910_misc_init(tps65910, pmic_plat_data);
+	tps65910_ck32k_init(tps65910, pmic_plat_data);
 	tps65910_sleepinit(tps65910, pmic_plat_data);
 
 	return ret;
-- 
1.7.8.6


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH] mfd: add tps65910 32-kHz-crystal-input init
@ 2012-07-16 13:43       ` Samuel Ortiz
  0 siblings, 0 replies; 8+ messages in thread
From: Samuel Ortiz @ 2012-07-16 13:43 UTC (permalink / raw)
  To: Johan Hovold; +Cc: Grant Likely, Rob Herring, devicetree-discuss, linux-kernel

Hi Johan,

On Wed, Jul 11, 2012 at 03:44:33PM +0200, Johan Hovold wrote:
> Replace tps65910_misc_init with a dedicated init function for the
> 32-kHz-crystal input.
> 
> Signed-off-by: Johan Hovold <jhovold@gmail.com>
> ---
> 
> Hi Samuel,
> 
> How about something like this? My thought with misc_init was that it could be
> extended should more simple initialisation like for the ck32k_xtal need to be
> done, but perhaps it's cleaner to stick with dedicated init functions
> through-out. At least for now.
Yes, it's clearer, at least to me.
I applied this patch, thanks for following up.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH] mfd: add tps65910 32-kHz-crystal-input init
@ 2012-07-16 13:43       ` Samuel Ortiz
  0 siblings, 0 replies; 8+ messages in thread
From: Samuel Ortiz @ 2012-07-16 13:43 UTC (permalink / raw)
  To: Johan Hovold
  Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring

Hi Johan,

On Wed, Jul 11, 2012 at 03:44:33PM +0200, Johan Hovold wrote:
> Replace tps65910_misc_init with a dedicated init function for the
> 32-kHz-crystal input.
> 
> Signed-off-by: Johan Hovold <jhovold-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> 
> Hi Samuel,
> 
> How about something like this? My thought with misc_init was that it could be
> extended should more simple initialisation like for the ck32k_xtal need to be
> done, but perhaps it's cleaner to stick with dedicated init functions
> through-out. At least for now.
Yes, it's clearer, at least to me.
I applied this patch, thanks for following up.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2012-07-16 13:44 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-28 10:20 [PATCH 0/2] mfd: tps65910: add support for enabling external 32-kHz oscillator Johan Hovold
2012-06-28 10:20 ` [PATCH 1/2] " Johan Hovold
2012-06-28 10:20 ` [PATCH 2/2] mfd: tps65910: add device-tree entry to enable " Johan Hovold
2012-07-05 15:23 ` [PATCH 0/2] mfd: tps65910: add support for enabling " Samuel Ortiz
2012-07-05 15:23   ` Samuel Ortiz
2012-07-11 13:44   ` [PATCH] mfd: add tps65910 32-kHz-crystal-input init Johan Hovold
2012-07-16 13:43     ` Samuel Ortiz
2012-07-16 13:43       ` Samuel Ortiz

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.