From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@linaro.org (Shawn Guo)
Date: Thu, 12 Jul 2012 09:30:28 +0800
Subject: [PATCH v6 7/7] ARM: dts: imx6q-sabrelite: add usbotg pinctrl
 support
In-Reply-To: <1342006425-21008-8-git-send-email-richard.zhao@freescale.com>
References: <1342006425-21008-1-git-send-email-richard.zhao@freescale.com>
 <1342006425-21008-8-git-send-email-richard.zhao@freescale.com>
Message-ID: <20120712013026.GC6971@S2101-09.ap.freescale.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, Jul 11, 2012 at 07:33:45PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |    2 ++
>  arch/arm/boot/dts/imx6q.dtsi          |    6 ++++++
>  2 files changed, 8 insertions(+)
> 
I haven't see usb driver that Greg applied calls pinctrl API to set up
the pin.  So I'm not going to apply this one.

Regards,
Shawn

> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 5bba0d1..de3cd2e 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -57,6 +57,8 @@
>  		aips-bus at 02100000 { /* AIPS2 */
>  			usb at 02184000 { /* USB OTG */
>  				vbus-supply = <&reg_usb_otg_vbus>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_usbotg_1>;
>  				status = "okay";
>  			};
>  
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index 5e4f100..64a24a0 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -552,6 +552,12 @@
>  					};
>  				};
>  
> +				usbotg {
> +					pinctrl_usbotg_1: usbotggrp-1 {
> +						fsl,pins = <1591 0x17059>;	/* MX6Q_PAD_GPIO_1__USBOTG_ID */
> +					};
> +				};
> +
>  				usdhc3 {
>  					pinctrl_usdhc3_1: usdhc3grp-1 {
>  						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
> -- 
> 1.7.9.5
> 
>