From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from storm.alittletooquiet.net ([67.23.28.199]:39123 "EHLO storm.alittletooquiet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932078Ab2GMQ0H (ORCPT ); Fri, 13 Jul 2012 12:26:07 -0400 Date: Fri, 13 Jul 2012 12:26:06 -0400 From: Forest Bond To: John W Linville Cc: Larry Finger , linux-wireless@vger.kernel.org Subject: [PATCH resubmit] rtlwifi: rtl8192de: Fix phy-based version calculation Message-ID: <20120713162605.GH9489@alittletooquiet.net> (sfid-20120713_182612_928590_97CA4F78) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <5000484E.9070700@lwfinger.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Forest Bond Commit d83579e2a50ac68389e6b4c58b845c702cf37516 incorporated some changes from the vendor driver that made it newly important that the calculated hardware version correctly include the CHIP_92D bit, as all of the IS_92D_* macros were changed to depend on it. However, this bit was being unset for dual-mac, dual-phy devices. The vendor driver behavior was modified to not do this, but unfortunately this change was not picked up along with the others. This caused scanning in the 2.4GHz band to be broken, and possibly other bugs as well. This patch brings the version calculation logic in parity with the vendor driver in this regard, and in doing so fixes the regression. However, the version calculation code in general continues to be largely incoherent and messy, and needs to be cleaned up. Signed-off-by: Forest Bond Cc: Stable [v3.2+] Signed-off-by: Larry Finger --- drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 18380a7..4420312 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3345,21 +3345,21 @@ void rtl92d_phy_config_macphymode_info(struct ieee80211_hw *hw) switch (rtlhal->macphymode) { case DUALMAC_SINGLEPHY: rtlphy->rf_type = RF_2T2R; - rtlhal->version |= CHIP_92D_SINGLEPHY; + rtlhal->version |= RF_TYPE_2T2R; rtlhal->bandset = BAND_ON_BOTH; rtlhal->current_bandtype = BAND_ON_2_4G; break; case SINGLEMAC_SINGLEPHY: rtlphy->rf_type = RF_2T2R; - rtlhal->version |= CHIP_92D_SINGLEPHY; + rtlhal->version |= RF_TYPE_2T2R; rtlhal->bandset = BAND_ON_BOTH; rtlhal->current_bandtype = BAND_ON_2_4G; break; case DUALMAC_DUALPHY: rtlphy->rf_type = RF_1T1R; - rtlhal->version &= (~CHIP_92D_SINGLEPHY); + rtlhal->version &= RF_TYPE_1T1R; /* Now we let MAC0 run on 5G band. */ if (rtlhal->interfaceindex == 0) { rtlhal->bandset = BAND_ON_5G; -- 1.7.0.4