From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sat, 18 Aug 2012 13:53:16 -0700 Subject: [U-Boot] Please pull u-boot-staging/trini@ti.com In-Reply-To: <20120818141556.GA13282@bill-the-cat> References: <20120817215201.GG3255@bill-the-cat> <20120818082855.1bb115e3@lilith> <20120818141556.GA13282@bill-the-cat> Message-ID: <20120818205316.GB13282@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, Aug 18, 2012 at 07:15:56AM -0700, Tom Rini wrote: > On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote: > > Hi Tom, > > > > On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini wrote: > > > > > Hello, > > > > > > This replaces my previous pull-request and is new warning free on > > > MAKEALL -a arm for ELDK4.2/5.1/5.2.1. > > > > > > The following changes since commit > > > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: > > > > > > zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) > > > > > > are available in the git repository at: > > > > > > git://git.denx.de/u-boot-staging trini at ti.com > > > > > > for you to fetch changes up to > > > 5d26e4de33fab7b132e8a8036ac54176f537d79f: > > > > > > ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15 > > > 09:43:47 -0700) > > > > > > ---------------------------------------------------------------- > > > John Rigby (1): > > > u8500: Separating mmc config parameters from driver > > > > > > Mathieu J. Poirier (10): > > > snowball: Add support for ux500 based snowball board > > > u8500: Moving prcmu to cpu directory > > > snowball: Adding architecture dependent initialisation > > > snowball: Adding CPU clock initialisation > > > snowball: Moving to ux500.v2 addess scheme for PRCMU access > > > snowball: applying power to LAN and GBF controllers > > > u8500: Moving processor-specific functions to cpu area. > > > u8500: Enabling power to MMC device on AB8500 V2 > > > armv7: Adding cpu specific cache managmenent > > > snowball: Adding board specific cache cleanup routine > > > > > > Stephen Warren (4): > > > README: fix references to config_cmd_default.h > > > ARM: arm1176: enable instruction cache in arch_cpu_init() > > > ARM: add basic support for the Broadcom BCM2835 SoC > > > ARM: add Raspberry Pi model B board, using BCM2835 SoC > > > > > > MAINTAINERS | 8 + > > > README | 4 +- > > > arch/arm/cpu/arm1176/bcm2835/Makefile | 37 + > > > arch/arm/cpu/arm1176/bcm2835/config.mk | 19 + > > > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 + > > > arch/arm/cpu/arm1176/bcm2835/reset.c | 35 + > > > arch/arm/cpu/arm1176/bcm2835/timer.c | 55 ++ > > > arch/arm/cpu/arm1176/cpu.c | 7 + > > > arch/arm/cpu/armv7/cpu.c | 8 + > > > arch/arm/cpu/armv7/u8500/Makefile | 2 +- > > > arch/arm/cpu/armv7/u8500/clock.c | 34 + > > > arch/arm/cpu/armv7/u8500/cpu.c | 192 +++++ > > > .../arm/cpu/armv7}/u8500/prcmu.c | 128 +++- > > > arch/arm/include/asm/arch-bcm2835/gpio.h | 66 ++ > > > arch/arm/include/asm/arch-bcm2835/timer.h | 37 + > > > arch/arm/include/asm/arch-bcm2835/wdog.h | 36 + > > > arch/arm/include/asm/arch-u8500/clock.h | 5 +- > > > arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 ++ > > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++++ > > > arch/arm/include/asm/arch-u8500/hardware.h | 33 +- > > > .../arm/include/asm/arch-u8500/prcmu.h | 35 +- > > > arch/arm/include/asm/arch-u8500/sys_proto.h | 1 + > > > board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +- > > > board/raspberrypi/rpi_b/Makefile | 34 + > > > board/raspberrypi/rpi_b/rpi_b.c | 34 + > > > board/st-ericsson/snowball/Makefile | 49 ++ > > > board/st-ericsson/snowball/db8500_pins.h | 745 > > > ++++++++++++++++++++ > > > board/st-ericsson/snowball/snowball.c | 348 +++++++++ > > > board/st-ericsson/u8500/Makefile | 2 +- > > > board/st-ericsson/u8500/u8500_href.c | 100 +-- > > > boards.cfg | 2 + > > > drivers/gpio/Makefile | 2 + > > > drivers/gpio/bcm2835_gpio.c | 89 +++ > > > drivers/gpio/db8500_gpio.c | 221 ++++++ > > > drivers/mmc/arm_pl180_mmci.c | 131 ++-- > > > drivers/mmc/arm_pl180_mmci.h | 27 +- > > > drivers/serial/serial_pl01x.c | 2 + > > > include/configs/rpi_b.h | 104 +++ > > > include/configs/snowball.h | 266 +++++++ 39 > > > files changed, 2937 insertions(+), 213 deletions(-) create mode > > > 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 > > > arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 > > > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 > > > arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 > > > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 > > > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => > > > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 > > > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 > > > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 > > > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644 > > > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 > > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename > > > board/st-ericsson/u8500/prcmu-fw.h => > > > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644 > > > board/raspberrypi/rpi_b/Makefile create mode 100644 > > > board/raspberrypi/rpi_b/rpi_b.c create mode 100644 > > > board/st-ericsson/snowball/Makefile create mode 100644 > > > board/st-ericsson/snowball/db8500_pins.h create mode 100644 > > > board/st-ericsson/snowball/snowball.c create mode 100644 > > > drivers/gpio/bcm2835_gpio.c create mode 100644 > > > drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h > > > create mode 100644 include/configs/snowball.h > > > > Are you sure you want me to only pull the top 15 patches of > > u-boot-staging/trini at ti.com, but not the tens of ones that that are > > below it in u-boot-staging/master? These are nowhere else, especially > > not in u-boot/master, so I am wondering why your your request takes > > staging/master as its base. > > I don't see any patches like that. And I did a quick re-confirm of what > is in trini at ti.com and that's what I want to replace the commits in > u-boot-arm/master from before. To be clear, u-boot-staging/trini at ti.com is based on a somewhat older, but not top of tree u-boot/master than what u-boot-arm is based on today. I think your local u-boot/master is out of date. http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127 is what my branch is on top of. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: