From mboxrd@z Thu Jan 1 00:00:00 1970 From: Allen Martin Date: Fri, 19 Oct 2012 22:46:45 -0700 Subject: [U-Boot] [PATCH V2 1/5] ARM: fix u-boot.lds for -ffunction-sections/-fdata-sections In-Reply-To: <1350602759-22605-1-git-send-email-swarren@wwwdotorg.org> References: <1350602759-22605-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <20121020054644.GB25104@badger> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Oct 18, 2012 at 04:25:55PM -0700, Stephen Warren wrote: > From: Stephen Warren > > When -ffunction-sections or -fdata-section are used, symbols are placed > into sections such as .data.eserial1_device and .bss.serial_current. > Update the linker script to explicitly include these. Without this > change (at least with my gcc-4.5.3 built using crosstool-ng), I see that > the sections do end up being included, but __bss_end__ gets set to the > same value as __bss_start. > Acked-by: Allen Martin > Signed-off-by: Stephen Warren > --- > v2: Removed changes from some entries where it wasn't needed. > --- > arch/arm/cpu/u-boot.lds | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds > index e49ca0c..9153c3d 100644 > --- a/arch/arm/cpu/u-boot.lds > +++ b/arch/arm/cpu/u-boot.lds > @@ -34,8 +34,8 @@ SECTIONS > .text : > { > __image_copy_start = .; > - CPUDIR/start.o (.text) > - *(.text) > + CPUDIR/start.o (.text*) > + *(.text*) > } > > . = ALIGN(4); > @@ -43,7 +43,7 @@ SECTIONS > > . = ALIGN(4); > .data : { > - *(.data) > + *(.data*) > } > > . = ALIGN(4); > @@ -81,7 +81,7 @@ SECTIONS > > .bss __rel_dyn_start (OVERLAY) : { > __bss_start = .; > - *(.bss) > + *(.bss*) > . = ALIGN(4); > __bss_end__ = .; > } > -- > 1.7.0.4 > -- nvpublic