From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 25 Jan 2013 09:06:43 +0100
Subject: [U-Boot] [PATCH] powerpc/p2041: skip waiting for SERDES bank 3
 reset done
In-Reply-To: <20130124090311.39a30162@crub>
References: <1358930919-5322-1-git-send-email-agust@denx.de>
	<ED492CCEAF882048BC2237DE806547C90B0A77D7@039-SN2MPN1-013.039d.mgd.msft.net>
	<20130123113644.68820536@crub>
	<ED492CCEAF882048BC2237DE806547C90B0A8519@039-SN2MPN1-013.039d.mgd.msft.net>
	<20130124090311.39a30162@crub>
Message-ID: <20130125090643.44a300ca@crub>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

On Thu, 24 Jan 2013 09:03:11 +0100
Anatolij Gustschin <agust@denx.de> wrote:

> Hello,
> 
> On Thu, 24 Jan 2013 02:33:31 +0000
> Xie Shaohui-B21989 <B21989@freescale.com> wrote:
> ...
> > > currently I do not have access to the p2041rdb board, but here is the
> > > previously captured boot log where I've seen this:
> > > 
> > > 
> > > U-Boot 2011.09-00000-g2c02d1d (Oct 22 2011 - 18:31:36)
> > > 
> > [S.H] Did you try the latest U-boot? This u-boot is old. I don't see the
> > "time out" dump with the latest U-boot.
> 
> I'm not sure which exact version I've tried, IIRC it was v2013-rcX
> and the problem was there also. I'll have access to the p2041rdb
> board tomorrow and will tell which exact version it was.

It was the version 2013.01-rc1-00258-gce12a8c. Now I updated to
v2013.01 and do not see the issue any more. This patch is not needed
then. Sorry for the noise.

Thanks,

Anatolij