From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752292Ab3EUJWl (ORCPT ); Tue, 21 May 2013 05:22:41 -0400 Received: from cantor2.suse.de ([195.135.220.15]:48554 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750928Ab3EUJWj (ORCPT ); Tue, 21 May 2013 05:22:39 -0400 Date: Tue, 21 May 2013 11:22:33 +0200 From: Jan Kara To: Li Wang Cc: linux-ext4@vger.kernel.org, "Theodore Ts'o" , Andreas Dilger , Dmitry Monakhov , Zheng Liu , linux-kernel@vger.kernel.org, Yunchuan Wen Subject: Re: [PATCH v2] ext4: Avoid unnecessarily writing back dirty pages before hole punching Message-ID: <20130521092233.GA10180@quack.suse.cz> References: <20130517032328.GA14249@gmail.com> <1369040675-7347-1-git-send-email-liwang@ubuntukylin.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1369040675-7347-1-git-send-email-liwang@ubuntukylin.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon 20-05-13 17:04:35, Li Wang wrote: > For hole punching, currently ext4 will synchronously write back the > dirty pages fit into the hole, since the data on the disk responding > to those pages are to be deleted, it is benefical to directly release > those pages, no matter they are dirty or not, except the ordered case. > > Signed-off-by: Li Wang > Signed-off-by: Yunchuan Wen > Reviewed-by: Zheng Liu > Cc: Dmitry Monakhov > --- > Hi Zheng, > Thanks for your comments. > This is the revised version with the operation of writting back moved > down after the inode mutex held. But there is one thing I wanna confirm > is that whether the inode mutex could prevent the mmap() writer? I did > not take a careful look at the mmap() code, the straightforward thinking > is that mmap() write will directly dirty the pages without going through > the VFS generic_file_write() path. Currently there's no easy way to stop mmap writer. When I eventually get to implementing the mapping range lock, it will be used exactly for that. > BTW, I have one other question to confirm regarding the ext4 journal mode: > what is the advantage of data=ordered journal mode compared to data=writeback? > For overwriting write, it still may lead to the inconsistence between data and > metadata, that is, data is new and metadata is old. So its standpoint is > that it beats data=writeback in appending write? The advantage of data=ordered mode is that in case of a system crash / power failure, you are guaranteed that only data sometimes written to a file is visible there - i.e., you will not ever expose uninitialized blocks to user (which is a security concern on multiuser systems as those uninitialized blocks can contain old versions of /etc/shadow or other sensitive data). Honza > --- > fs/ext4/inode.c | 27 +++++++++++++--------- > fs/jbd2/journal.c | 1 + > fs/jbd2/transaction.c | 61 +++++++++++++++++++++++++++++++------------------ > include/linux/jbd2.h | 3 +++ > 4 files changed, 59 insertions(+), 33 deletions(-) > > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c > index d6382b8..568b0bd 100644 > --- a/fs/ext4/inode.c > +++ b/fs/ext4/inode.c > @@ -3569,6 +3569,16 @@ int ext4_can_truncate(struct inode *inode) > return 0; > } > > +static inline int ext4_begin_ordered_fallocate(struct inode *inode, > + loff_t start, loff_t length) > +{ > + if (!EXT4_I(inode)->jinode) > + return 0; > + return jbd2_journal_begin_ordered_fallocate(EXT4_JOURNAL(inode), > + EXT4_I(inode)->jinode, > + start, length); > +} > + I somewhat dislike the naming of the functions - especially 'fallocate' seems a bit misleading as it's really about hole punching. So maybe we could call the functions like: ext4_begin_ordered_punch_hole() and jbd2_journal_begin_ordered_punch_hole()? > /* > * ext4_punch_hole: punches a hole in a file by releaseing the blocks > * associated with the given offset and length > @@ -3602,17 +3612,6 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) > > trace_ext4_punch_hole(inode, offset, length); > > - /* > - * Write out all dirty pages to avoid race conditions > - * Then release them. > - */ > - if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) { > - ret = filemap_write_and_wait_range(mapping, offset, > - offset + length - 1); > - if (ret) > - return ret; > - } > - > mutex_lock(&inode->i_mutex); > /* It's not possible punch hole on append only file */ > if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) { > @@ -3644,6 +3643,12 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) > first_page_offset = first_page << PAGE_CACHE_SHIFT; > last_page_offset = last_page << PAGE_CACHE_SHIFT; > > + if (ext4_should_order_data(inode)) { > + ret = ext4_begin_ordered_fallocate(inode, offset, length); > + if (ret) > + return ret; > + } > + > /* Now release the pages */ > if (last_page_offset > first_page_offset) { > truncate_pagecache_range(inode, first_page_offset, > diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c > index 9545757..ccc483a 100644 > --- a/fs/jbd2/journal.c > +++ b/fs/jbd2/journal.c > @@ -98,6 +98,7 @@ EXPORT_SYMBOL(jbd2_journal_file_inode); > EXPORT_SYMBOL(jbd2_journal_init_jbd_inode); > EXPORT_SYMBOL(jbd2_journal_release_jbd_inode); > EXPORT_SYMBOL(jbd2_journal_begin_ordered_truncate); > +EXPORT_SYMBOL(jbd2_journal_begin_ordered_fallocate); > EXPORT_SYMBOL(jbd2_inode_cache); > > static void __journal_abort_soft (journal_t *journal, int errno); > diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c > index 10f524c..035c064 100644 > --- a/fs/jbd2/transaction.c > +++ b/fs/jbd2/transaction.c > @@ -2305,6 +2305,36 @@ done: > return 0; > } > > + > +static int jbd2_journal_begin_ordered_discard(journal_t *journal, > + struct jbd2_inode *jinode, > + loff_t start, loff_t end) > +{ I don't see a need for this internal function - it is exactly the same as the external one (jbd2_journal_begin_ordered_punch_hole()). > + transaction_t *inode_trans, *commit_trans; > + int ret = 0; > + > + /* This is a quick check to avoid locking if not necessary */ > + if (!jinode->i_transaction) > + goto out; > + /* Locks are here just to force reading of recent values, it is > + * enough that the transaction was not committing before we started > + * a transaction adding the inode to orphan list */ > + read_lock(&journal->j_state_lock); > + commit_trans = journal->j_committing_transaction; > + read_unlock(&journal->j_state_lock); > + spin_lock(&journal->j_list_lock); > + inode_trans = jinode->i_transaction; > + spin_unlock(&journal->j_list_lock); > + if (inode_trans == commit_trans) { > + ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping, > + start, end); > + if (ret) > + jbd2_journal_abort(journal, ret); > + } > +out: > + return ret; > +} > + > /* > * File truncate and transaction commit interact with each other in a > * non-trivial way. If a transaction writing data block A is > @@ -2329,27 +2359,14 @@ int jbd2_journal_begin_ordered_truncate(journal_t *journal, > struct jbd2_inode *jinode, > loff_t new_size) > { > - transaction_t *inode_trans, *commit_trans; > - int ret = 0; > + return jbd2_journal_begin_ordered_discard(journal, jinode, > + new_size, LLONG_MAX); > +} You can make this function inline and declare it in jbd2.h header file... Honza > > - /* This is a quick check to avoid locking if not necessary */ > - if (!jinode->i_transaction) > - goto out; > - /* Locks are here just to force reading of recent values, it is > - * enough that the transaction was not committing before we started > - * a transaction adding the inode to orphan list */ > - read_lock(&journal->j_state_lock); > - commit_trans = journal->j_committing_transaction; > - read_unlock(&journal->j_state_lock); > - spin_lock(&journal->j_list_lock); > - inode_trans = jinode->i_transaction; > - spin_unlock(&journal->j_list_lock); > - if (inode_trans == commit_trans) { > - ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping, > - new_size, LLONG_MAX); > - if (ret) > - jbd2_journal_abort(journal, ret); > - } > -out: > - return ret; > +int jbd2_journal_begin_ordered_fallocate(journal_t *journal, > + struct jbd2_inode *jinode, > + loff_t start, loff_t length) > +{ > + return jbd2_journal_begin_ordered_discard(journal, jinode, > + start, start + length - 1); > } > diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h > index 6e051f4..6c63c5e 100644 > --- a/include/linux/jbd2.h > +++ b/include/linux/jbd2.h > @@ -1128,6 +1128,9 @@ extern int jbd2_journal_force_commit(journal_t *); > extern int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode); > extern int jbd2_journal_begin_ordered_truncate(journal_t *journal, > struct jbd2_inode *inode, loff_t new_size); > +extern int jbd2_journal_begin_ordered_fallocate(journal_t *journal, > + struct jbd2_inode *inode, loff_t start, > + loff_t length); > extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode); > extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode); > > -- > 1.7.9.5 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Jan Kara SUSE Labs, CR