From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Thu, 30 May 2013 08:47:41 +0000 Subject: Re: [lm-sensors] Configuration file for Intel D2500CC mini-ITX board Message-Id: <20130530104741.2a18e809@endymion.delvare> List-Id: References: <20130529150440.4e021553@obraro.integrasoft.ro> In-Reply-To: <20130529150440.4e021553@obraro.integrasoft.ro> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Thu, 30 May 2013 10:40:42 +0300, SZENTE Balint wrote: > I have read the relevant parts from the Intel Atom Datasheet and I > believe now I figured out what should be the limits. > > Table 4-30 from the "Intel Atom Processor D2000 and N2000 Series > Datasheet, Vol. 1" contains two voltage specifications > : > > VCC_HFM: > - Vcc at Highest Frequency Mode (HFM) > - Range 0.91V - 1.21V, depending on the calibrated individual > voltage identification value (VID) > > VCC_LFM: only for CPUs with SpeedStep feature > - Vcc at Lowest Frequency Mode (LFM) > - Range 0.70/0.75 - 0.90V, depending on VID > > The Intel D2500CC mini-ITX board has an Intel Atom D2500 soldered on > it which lacks the SpeedStep technology, so one can say that the proper > Vcore limits for this specific mainboard are: > > label in0 "Vcore" > set in0_min 0.91 > set in0_max 1.21 > > Can you fix this on the Wiki page? Done, thanks for the update! -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors