From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754881Ab3FLL6Z (ORCPT ); Wed, 12 Jun 2013 07:58:25 -0400 Received: from 17.mo3.mail-out.ovh.net ([87.98.178.58]:37483 "EHLO mo3.mail-out.ovh.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751379Ab3FLL6X (ORCPT ); Wed, 12 Jun 2013 07:58:23 -0400 Date: Wed, 12 Jun 2013 13:53:41 +0200 From: Jean-Christophe PLAGNIOL-VILLARD To: manjunath.goudar@linaro.org Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, patches@linaro.org, stern@rowland.harvard.edu, arnd@linaro.org, gregkh@linuxfoundation.org, Greg KH , Grant Likely , Rob Herring , Andrew Victor , Nicolas Ferre , linux-kernel@vger.kernel.org X-Ovh-Mailout: 178.32.228.3 (mo3.mail-out.ovh.net) Subject: Re: [PATCH 05/10] USB: EHCI: make ehci-atmel a separate driver Message-ID: <20130612115341.GP23653@game.jcrosoft.org> References: <1360258447-27247-1-git-send-email-yes> <5113e60e.c84e420a.08c3.ffffbeda@mx.google.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5113e60e.c84e420a.08c3.ffffbeda@mx.google.com> X-PGP-Key: http://uboot.jcrosoft.org/plagnioj.asc X-PGP-key-fingerprint: 6309 2BBA 16C8 3A07 1772 CC24 DEFC FFA3 279C CE7C User-Agent: Mutt/1.5.20 (2009-06-14) X-Ovh-Tracer-Id: 7076280915546516274 X-Ovh-Remote: 213.251.161.87 (ns32433.ovh.net) X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiiedrhedtucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-Spam-Check: DONE|U 0.5/N X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiiedrhedtucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 23:04 Thu 07 Feb , manjunath.goudar@linaro.org wrote: > From: Manjunath Goudar > > Separate the Atmel host controller driver from ehci-hcd host code > into its own driver module. > > Signed-off-by: Manjunath Goudar > Cc: Alan Stern > Cc: Greg KH > Cc: Grant Likely > Cc: Rob Herring > Cc: Andrew Victor > Cc: Nicolas Ferre > Cc: Jean-Christophe Plagniol-Villard > Cc: linux-usb@vger.kernel.org > Cc: linux-kernel@vger.kernel.org Acked-by: Jean-Christophe PLAGNIOL-VILLARD Best Regards, J. > --- > drivers/usb/host/Kconfig | 7 ++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-atmel.c | 78 ++++++++++++++++++++++------------------- > drivers/usb/host/ehci-hcd.c | 6 +--- > 4 files changed, 51 insertions(+), 41 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 3689b7b..5a13f9d 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -176,6 +176,13 @@ config USB_EHCI_HCD_ORION > ---help--- > Enables support for the on-chip EHCI controller on > Morvell Orion chips. > +config USB_EHCI_HCD_AT91 > + tristate "Support for Atmel on-chip EHCI USB controller" > + depends on USB_EHCI_HCD && ARCH_AT91 > + default y > + ---help--- > + Enables support for the on-chip EHCI controller on > + Atmel chips. > > config USB_EHCI_MSM > bool "Support for MSM on-chip EHCI USB controller" > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 23b07dd..96b4839 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o > obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o > obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o > obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o > +obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o > obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o > obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o > obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o > diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c > index 27639487..2f06711 100644 > --- a/drivers/usb/host/ehci-atmel.c > +++ b/drivers/usb/host/ehci-atmel.c > @@ -15,6 +15,19 @@ > #include > #include > #include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "ehci.h" > + > +#define DRIVER_DESC "EHCI atmel driver" > + > +static const char hcd_name[] = "ehci-atmel"; > +static struct hc_driver __read_mostly ehci_atmel_hc_driver; > > /* interface and function clocks */ > static struct clk *iclk, *fclk; > @@ -60,41 +73,6 @@ static int ehci_atmel_setup(struct usb_hcd *hcd) > return ehci_setup(hcd); > } > > -static const struct hc_driver ehci_atmel_hc_driver = { > - .description = hcd_name, > - .product_desc = "Atmel EHCI UHP HS", > - .hcd_priv_size = sizeof(struct ehci_hcd), > - > - /* generic hardware linkage */ > - .irq = ehci_irq, > - .flags = HCD_MEMORY | HCD_USB2, > - > - /* basic lifecycle operations */ > - .reset = ehci_atmel_setup, > - .start = ehci_run, > - .stop = ehci_stop, > - .shutdown = ehci_shutdown, > - > - /* managing i/o requests and associated device resources */ > - .urb_enqueue = ehci_urb_enqueue, > - .urb_dequeue = ehci_urb_dequeue, > - .endpoint_disable = ehci_endpoint_disable, > - .endpoint_reset = ehci_endpoint_reset, > - > - /* scheduling support */ > - .get_frame_number = ehci_get_frame, > - > - /* root hub support */ > - .hub_status_data = ehci_hub_status_data, > - .hub_control = ehci_hub_control, > - .bus_suspend = ehci_bus_suspend, > - .bus_resume = ehci_bus_resume, > - .relinquish_port = ehci_relinquish_port, > - .port_handed_over = ehci_port_handed_over, > - > - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, > -}; > - > static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); > > static int ehci_atmel_drv_probe(struct platform_device *pdev) > @@ -210,7 +188,35 @@ static struct platform_driver ehci_atmel_driver = { > .remove = ehci_atmel_drv_remove, > .shutdown = usb_hcd_platform_shutdown, > .driver = { > - .name = "atmel-ehci", > + .name = hcd_name, > .of_match_table = of_match_ptr(atmel_ehci_dt_ids), > }, > }; > + > +static const struct ehci_driver_overrides atmel_overrides __initdata = { > + .reset = ehci_atmel_setup, > +}; > + > +static int __init ehci_atmel_init(void) > +{ > + if (usb_disabled()) > + return -ENODEV; > + > + pr_info("%s: " DRIVER_DESC "\n", hcd_name); > + ehci_init_driver(&ehci_atmel_hc_driver, &atmel_overrides); > + return platform_driver_register(&ehci_atmel_driver); > +} > +module_init(ehci_atmel_init); > + > +static void __exit ehci_atmel_cleanup(void) > +{ > + platform_driver_unregister(&ehci_atmel_driver); > +} > +module_exit(ehci_atmel_cleanup); > + > +MODULE_DESCRIPTION(DRIVER_DESC); > + > +MODULE_ALIAS("platform:ehci-atmel"); > +MODULE_AUTHOR("Nicolas Ferre"); > +MODULE_LICENSE("GPL"); > + > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > index 5a19a57..628ed139 100644 > --- a/drivers/usb/host/ehci-hcd.c > +++ b/drivers/usb/host/ehci-hcd.c > @@ -1272,11 +1272,6 @@ MODULE_LICENSE ("GPL"); > #define PLATFORM_DRIVER ehci_hcd_w90x900_driver > #endif > > -#ifdef CONFIG_ARCH_AT91 > -#include "ehci-atmel.c" > -#define PLATFORM_DRIVER ehci_atmel_driver > -#endif > - > #ifdef CONFIG_USB_OCTEON_EHCI > #include "ehci-octeon.c" > #define PLATFORM_DRIVER ehci_octeon_driver > @@ -1334,6 +1329,7 @@ MODULE_LICENSE ("GPL"); > !defined(PLATFORM_DRIVER) && \ > !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ > !IS_ENABLED(CONFIG_PLAT_SPEAR) && \ > + !IS_ENABLED(CONFIG_ARCH_AT91) && \ > !defined(PS3_SYSTEM_BUS_DRIVER) && \ > !defined(OF_PLATFORM_DRIVER) && \ > !defined(XILINX_OF_PLATFORM_DRIVER) > -- > 1.7.9.5 > From mboxrd@z Thu Jan 1 00:00:00 1970 From: plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD) Date: Wed, 12 Jun 2013 13:53:41 +0200 Subject: [PATCH 05/10] USB: EHCI: make ehci-atmel a separate driver In-Reply-To: <5113e60e.c84e420a.08c3.ffffbeda@mx.google.com> References: <1360258447-27247-1-git-send-email-yes> <5113e60e.c84e420a.08c3.ffffbeda@mx.google.com> Message-ID: <20130612115341.GP23653@game.jcrosoft.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 23:04 Thu 07 Feb , manjunath.goudar at linaro.org wrote: > From: Manjunath Goudar > > Separate the Atmel host controller driver from ehci-hcd host code > into its own driver module. > > Signed-off-by: Manjunath Goudar > Cc: Alan Stern > Cc: Greg KH > Cc: Grant Likely > Cc: Rob Herring > Cc: Andrew Victor > Cc: Nicolas Ferre > Cc: Jean-Christophe Plagniol-Villard > Cc: linux-usb at vger.kernel.org > Cc: linux-kernel at vger.kernel.org Acked-by: Jean-Christophe PLAGNIOL-VILLARD Best Regards, J. > --- > drivers/usb/host/Kconfig | 7 ++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-atmel.c | 78 ++++++++++++++++++++++------------------- > drivers/usb/host/ehci-hcd.c | 6 +--- > 4 files changed, 51 insertions(+), 41 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 3689b7b..5a13f9d 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -176,6 +176,13 @@ config USB_EHCI_HCD_ORION > ---help--- > Enables support for the on-chip EHCI controller on > Morvell Orion chips. > +config USB_EHCI_HCD_AT91 > + tristate "Support for Atmel on-chip EHCI USB controller" > + depends on USB_EHCI_HCD && ARCH_AT91 > + default y > + ---help--- > + Enables support for the on-chip EHCI controller on > + Atmel chips. > > config USB_EHCI_MSM > bool "Support for MSM on-chip EHCI USB controller" > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 23b07dd..96b4839 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o > obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o > obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o > obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o > +obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o > obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o > obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o > obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o > diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c > index 27639487..2f06711 100644 > --- a/drivers/usb/host/ehci-atmel.c > +++ b/drivers/usb/host/ehci-atmel.c > @@ -15,6 +15,19 @@ > #include > #include > #include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "ehci.h" > + > +#define DRIVER_DESC "EHCI atmel driver" > + > +static const char hcd_name[] = "ehci-atmel"; > +static struct hc_driver __read_mostly ehci_atmel_hc_driver; > > /* interface and function clocks */ > static struct clk *iclk, *fclk; > @@ -60,41 +73,6 @@ static int ehci_atmel_setup(struct usb_hcd *hcd) > return ehci_setup(hcd); > } > > -static const struct hc_driver ehci_atmel_hc_driver = { > - .description = hcd_name, > - .product_desc = "Atmel EHCI UHP HS", > - .hcd_priv_size = sizeof(struct ehci_hcd), > - > - /* generic hardware linkage */ > - .irq = ehci_irq, > - .flags = HCD_MEMORY | HCD_USB2, > - > - /* basic lifecycle operations */ > - .reset = ehci_atmel_setup, > - .start = ehci_run, > - .stop = ehci_stop, > - .shutdown = ehci_shutdown, > - > - /* managing i/o requests and associated device resources */ > - .urb_enqueue = ehci_urb_enqueue, > - .urb_dequeue = ehci_urb_dequeue, > - .endpoint_disable = ehci_endpoint_disable, > - .endpoint_reset = ehci_endpoint_reset, > - > - /* scheduling support */ > - .get_frame_number = ehci_get_frame, > - > - /* root hub support */ > - .hub_status_data = ehci_hub_status_data, > - .hub_control = ehci_hub_control, > - .bus_suspend = ehci_bus_suspend, > - .bus_resume = ehci_bus_resume, > - .relinquish_port = ehci_relinquish_port, > - .port_handed_over = ehci_port_handed_over, > - > - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, > -}; > - > static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); > > static int ehci_atmel_drv_probe(struct platform_device *pdev) > @@ -210,7 +188,35 @@ static struct platform_driver ehci_atmel_driver = { > .remove = ehci_atmel_drv_remove, > .shutdown = usb_hcd_platform_shutdown, > .driver = { > - .name = "atmel-ehci", > + .name = hcd_name, > .of_match_table = of_match_ptr(atmel_ehci_dt_ids), > }, > }; > + > +static const struct ehci_driver_overrides atmel_overrides __initdata = { > + .reset = ehci_atmel_setup, > +}; > + > +static int __init ehci_atmel_init(void) > +{ > + if (usb_disabled()) > + return -ENODEV; > + > + pr_info("%s: " DRIVER_DESC "\n", hcd_name); > + ehci_init_driver(&ehci_atmel_hc_driver, &atmel_overrides); > + return platform_driver_register(&ehci_atmel_driver); > +} > +module_init(ehci_atmel_init); > + > +static void __exit ehci_atmel_cleanup(void) > +{ > + platform_driver_unregister(&ehci_atmel_driver); > +} > +module_exit(ehci_atmel_cleanup); > + > +MODULE_DESCRIPTION(DRIVER_DESC); > + > +MODULE_ALIAS("platform:ehci-atmel"); > +MODULE_AUTHOR("Nicolas Ferre"); > +MODULE_LICENSE("GPL"); > + > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > index 5a19a57..628ed139 100644 > --- a/drivers/usb/host/ehci-hcd.c > +++ b/drivers/usb/host/ehci-hcd.c > @@ -1272,11 +1272,6 @@ MODULE_LICENSE ("GPL"); > #define PLATFORM_DRIVER ehci_hcd_w90x900_driver > #endif > > -#ifdef CONFIG_ARCH_AT91 > -#include "ehci-atmel.c" > -#define PLATFORM_DRIVER ehci_atmel_driver > -#endif > - > #ifdef CONFIG_USB_OCTEON_EHCI > #include "ehci-octeon.c" > #define PLATFORM_DRIVER ehci_octeon_driver > @@ -1334,6 +1329,7 @@ MODULE_LICENSE ("GPL"); > !defined(PLATFORM_DRIVER) && \ > !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ > !IS_ENABLED(CONFIG_PLAT_SPEAR) && \ > + !IS_ENABLED(CONFIG_ARCH_AT91) && \ > !defined(PS3_SYSTEM_BUS_DRIVER) && \ > !defined(OF_PLATFORM_DRIVER) && \ > !defined(XILINX_OF_PLATFORM_DRIVER) > -- > 1.7.9.5 >