From: Pavel Machek <pavel@ucw.cz>
To: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
pali.rohar@gmail.com, kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org
Subject: [PATCH] N900: enable N900-specific drivers even if device tree is enabled
Date: Mon, 1 Jul 2013 23:15:04 +0200 [thread overview]
Message-ID: <20130701211504.GB15318@amd.pavel.ucw.cz> (raw)
In-Reply-To: <20130617111031.GQ20992@atomide.com>
We still need video & sound drivers with device tree enabled.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
---
Patch against 3.10.
--- linux-delme-clean//arch/arm/mach-omap2/board-rx51-video.c 2013-07-01 21:51:07.000000000 +0200
+++ linux-delme/arch/arm/mach-omap2/board-rx51-video.c 2013-07-01 22:50:27.000000000 +0200
@@ -61,7 +61,7 @@
static int __init rx51_video_init(void)
{
- if (!machine_is_nokia_rx51())
+ if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return 0;
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
diff -urN linux-delme-clean//sound/soc/omap/rx51.c linux-delme/sound/soc/omap/rx51.c
--- linux-delme-clean//sound/soc/omap/rx51.c 2013-07-01 21:54:49.000000000 +0200
+++ linux-delme/sound/soc/omap/rx51.c 2013-07-01 22:50:27.000000000 +0200
@@ -396,7 +396,7 @@
{
int err;
- if (!machine_is_nokia_rx51())
+ if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return -ENODEV;
err = gpio_request_one(RX51_TVOUT_SEL_GPIO,
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] N900: enable N900-specific drivers even if device tree is enabled
Date: Mon, 1 Jul 2013 23:15:04 +0200 [thread overview]
Message-ID: <20130701211504.GB15318@amd.pavel.ucw.cz> (raw)
In-Reply-To: <20130617111031.GQ20992@atomide.com>
We still need video & sound drivers with device tree enabled.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
---
Patch against 3.10.
--- linux-delme-clean//arch/arm/mach-omap2/board-rx51-video.c 2013-07-01 21:51:07.000000000 +0200
+++ linux-delme/arch/arm/mach-omap2/board-rx51-video.c 2013-07-01 22:50:27.000000000 +0200
@@ -61,7 +61,7 @@
static int __init rx51_video_init(void)
{
- if (!machine_is_nokia_rx51())
+ if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return 0;
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
diff -urN linux-delme-clean//sound/soc/omap/rx51.c linux-delme/sound/soc/omap/rx51.c
--- linux-delme-clean//sound/soc/omap/rx51.c 2013-07-01 21:54:49.000000000 +0200
+++ linux-delme/sound/soc/omap/rx51.c 2013-07-01 22:50:27.000000000 +0200
@@ -396,7 +396,7 @@
{
int err;
- if (!machine_is_nokia_rx51())
+ if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return -ENODEV;
err = gpio_request_one(RX51_TVOUT_SEL_GPIO,
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2013-07-01 21:15 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-09 1:59 N900 device tree conversion: how to do first step Pavel Machek
2013-06-09 1:59 ` Pavel Machek
2013-06-09 9:24 ` Pali Rohár
2013-06-09 9:24 ` Pali Rohár
2013-06-09 16:47 ` Pavel Machek
2013-06-09 16:47 ` Pavel Machek
2013-06-09 17:03 ` Pali Rohár
2013-06-09 17:03 ` Pali Rohár
2013-06-09 17:03 ` Pali Rohár
2013-06-09 17:30 ` Pavel Machek
2013-06-09 17:30 ` Pavel Machek
2013-06-09 20:11 ` Aaro Koskinen
2013-06-09 20:11 ` Aaro Koskinen
2013-06-13 13:26 ` Pavel Machek
2013-06-13 13:26 ` Pavel Machek
2013-06-13 14:10 ` Tony Lindgren
2013-06-13 14:10 ` Tony Lindgren
2013-06-13 14:28 ` Pavel Machek
2013-06-13 14:28 ` Pavel Machek
2013-06-13 14:57 ` Tony Lindgren
2013-06-13 14:57 ` Tony Lindgren
2013-06-13 15:52 ` Pavel Machek
2013-06-13 15:52 ` Pavel Machek
2013-06-13 16:14 ` Tony Lindgren
2013-06-13 16:14 ` Tony Lindgren
2013-06-13 23:08 ` Pavel Machek
2013-06-13 23:08 ` Pavel Machek
2013-06-14 5:56 ` Tony Lindgren
2013-06-14 5:56 ` Tony Lindgren
2013-06-14 21:28 ` Pavel Machek
2013-06-14 21:28 ` Pavel Machek
2013-06-17 11:10 ` Tony Lindgren
2013-06-17 11:10 ` Tony Lindgren
2013-06-27 12:12 ` N900 device tree conversion: next steps Pavel Machek
2013-07-01 14:03 ` [PATCH] N900: fix operation on emulator Pavel Machek
2013-07-01 14:03 ` Pavel Machek
2013-07-01 18:22 ` Sergei Shtylyov
2013-07-01 18:22 ` Sergei Shtylyov
2013-07-01 18:22 ` Sergei Shtylyov
2013-07-01 19:51 ` Pavel Machek
2013-07-01 19:51 ` Pavel Machek
2013-07-01 20:00 ` Sergei Shtylyov
2013-07-01 20:00 ` Sergei Shtylyov
2013-07-01 20:53 ` Pavel Machek
2013-07-01 20:53 ` Pavel Machek
2013-07-01 21:15 ` Pavel Machek [this message]
2013-07-01 21:15 ` [PATCH] N900: enable N900-specific drivers even if device tree is enabled Pavel Machek
2013-07-04 11:47 ` Tony Lindgren
2013-07-04 11:47 ` Tony Lindgren
2013-07-01 21:17 ` [PATCH] N900: add device tree Pavel Machek
2013-07-01 21:17 ` Pavel Machek
2013-07-04 17:19 ` Aaro Koskinen
2013-07-04 17:19 ` Aaro Koskinen
2013-07-04 20:21 ` Pavel Machek
2013-07-04 20:21 ` Pavel Machek
2013-07-04 20:32 ` Aaro Koskinen
2013-07-04 20:32 ` Aaro Koskinen
2013-07-13 12:17 ` [PATCH v2] " Pavel Machek
2013-07-13 12:17 ` Pavel Machek
2013-07-14 22:28 ` Aaro Koskinen
2013-07-14 22:28 ` Aaro Koskinen
2013-07-28 13:44 ` Pavel Machek
2013-07-28 13:44 ` Pavel Machek
2013-08-01 23:43 ` Pavel Machek
2013-08-01 23:43 ` Pavel Machek
2013-08-10 11:09 ` Pavel Machek
2013-08-10 11:09 ` Pavel Machek
2013-08-10 11:09 ` Pavel Machek
2013-08-10 11:27 ` [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree) Pavel Machek
2013-08-10 11:27 ` Pavel Machek
2013-08-10 11:46 ` [PATCH v2] N900: add device tree Belisko Marek
2013-08-10 11:46 ` Belisko Marek
2013-08-10 20:29 ` Jiri Kosina
2013-08-10 20:29 ` Jiri Kosina
2013-08-11 0:55 ` OMAP device tree maintainance (was Re: [PATCH v2] N900: add device tree) Pavel Machek
2013-08-11 0:55 ` Pavel Machek
2013-08-11 11:50 ` [PATCH v2] N900: add device tree Javier Martinez Canillas
2013-08-11 11:50 ` Javier Martinez Canillas
2013-08-11 13:47 ` Pavel Machek
2013-08-11 13:47 ` Pavel Machek
2013-08-11 13:47 ` Pavel Machek
2013-08-12 7:37 ` Tony Lindgren
2013-08-12 7:37 ` Tony Lindgren
2013-08-12 7:36 ` Tony Lindgren
2013-08-12 7:36 ` Tony Lindgren
2013-08-11 15:02 ` Javier Martinez Canillas
2013-08-11 15:02 ` Javier Martinez Canillas
2013-08-13 10:50 ` Benoit Cousson
2013-08-13 10:50 ` Benoit Cousson
2013-08-13 13:36 ` [PATCH v3] " Pavel Machek
2013-08-13 13:36 ` Pavel Machek
2013-08-13 14:06 ` Benoit Cousson
2013-08-13 14:06 ` Benoit Cousson
2013-06-26 15:14 ` N900 device tree conversion: first step Pavel Machek
2013-07-19 18:14 ` N900 device tree conversion: how to do " Sebastian Reichel
2013-07-19 18:14 ` Sebastian Reichel
2013-07-19 18:14 ` Sebastian Reichel
2013-07-28 13:37 ` Pavel Machek
2013-07-28 13:37 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130701211504.GB15318@amd.pavel.ucw.cz \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.