[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.10.0-wl-06036-gaf15f8d (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-3) ) #1 Mon Jul 1 23:30:57 CST 2013 [ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c25-0701/devel-cairo-x86_64-201307012240/.vmlinuz-af15f8de4f3a7b28e3a2c2064ad74106767516ca-20130701233130-9-bay branch=linux-devel/devel-cairo-x86_64-201307012240 BOOT_IMAGE=/kernel/x86_64-randconfig-c25-0701/af15f8de4f3a7b28e3a2c2064ad74106767516ca/vmlinuz-3.10.0-wl-06036-gaf15f8d [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02521000, 0x02521fff] PGTABLE [ 0.000000] BRK [0x02522000, 0x02522fff] PGTABLE [ 0.000000] BRK [0x02523000, 0x02523fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x02524000, 0x02524fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127612(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 840 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 222d240 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64519 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c25-0701/devel-cairo-x86_64-201307012240/.vmlinuz-af15f8de4f3a7b28e3a2c2064ad74106767516ca-20130701233130-9-bay branch=linux-devel/devel-cairo-x86_64-201307012240 BOOT_IMAGE=/kernel/x86_64-randconfig-c25-0701/af15f8de4f3a7b28e3a2c2064ad74106767516ca/vmlinuz-3.10.0-wl-06036-gaf15f8d [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 204124k/262136k available (11815k kernel code, 392k absent, 57620k reserved, 8095k data, 1036k init) [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2992.484 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5984.96 BogoMIPS (lpj=11969936) [ 0.008004] pid_max: default: 32768 minimum: 301 [ 0.009141] Mount-cache hash table entries: 256 [ 0.010418] Initializing cgroup subsys debug [ 0.011447] Initializing cgroup subsys devices [ 0.012004] Initializing cgroup subsys freezer [ 0.013065] Initializing cgroup subsys net_prio [ 0.014138] Initializing cgroup subsys hugetlb [ 0.015305] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.015305] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.015305] tlb_flushall_shift: 6 [ 0.016003] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.035820] ACPI: Core revision 20130517 [ 0.036612] ACPI: All ACPI Tables successfully acquired [ 0.038143] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.041236] Getting VERSION: 50014 [ 0.042141] Getting VERSION: 50014 [ 0.043033] Getting ID: 0 [ 0.044004] Getting ID: ff000000 [ 0.044873] Getting LVT0: 8700 [ 0.045700] Getting LVT1: 8400 [ 0.046592] enabled ExtINT on CPU#0 [ 0.048523] ENABLING IO-APIC IRQs [ 0.049411] init IO_APIC IRQs [ 0.050219] apic 0 pin 0 not connected [ 0.051175] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.052020] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.053885] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.056017] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.057852] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.060017] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.061851] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.064018] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.065860] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.068026] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.070019] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.071867] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.072017] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.073879] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.076017] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.077882] apic 0 pin 16 not connected [ 0.080002] apic 0 pin 17 not connected [ 0.080953] apic 0 pin 18 not connected [ 0.081905] apic 0 pin 19 not connected [ 0.082862] apic 0 pin 20 not connected [ 0.084001] apic 0 pin 21 not connected [ 0.084955] apic 0 pin 22 not connected [ 0.085927] apic 0 pin 23 not connected [ 0.087034] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088002] Using local APIC timer interrupts. [ 0.088002] calibrating APIC timer ... [ 0.092000] ... lapic delta = 6250058 [ 0.092000] ... PM-Timer delta = 358045 [ 0.092000] ... PM-Timer result ok [ 0.092000] ..... delta 6250058 [ 0.092000] ..... mult: 268437947 [ 0.092000] ..... calibration result: 4000037 [ 0.092000] ..... CPU clock speed is 2993.2386 MHz. [ 0.092000] ..... host bus clock speed is 1000.0037 MHz. [ 0.092166] devtmpfs: initialized [ 0.093571] xor: measuring software checksum speed [ 0.132003] prefetch64-sse: 10835.000 MB/sec [ 0.172002] generic_sse: 9113.000 MB/sec [ 0.173114] xor: using function: prefetch64-sse (10835.000 MB/sec) [ 0.174640] regulator-dummy: no parameters [ 0.175747] NET: Registered protocol family 16 [ 0.176506] ACPI: bus type PCI registered [ 0.177612] PCI: Using configuration type 1 for base access [ 0.182037] bio: create slab at 0 [ 0.248010] raid6: sse2x1 4874 MB/s [ 0.316011] raid6: sse2x2 5322 MB/s [ 0.384005] raid6: sse2x4 8650 MB/s [ 0.385034] raid6: using algorithm sse2x4 (8650 MB/s) [ 0.386287] raid6: using intx1 recovery algorithm [ 0.387548] ACPI: Added _OSI(Module Device) [ 0.388002] ACPI: Added _OSI(Processor Device) [ 0.389137] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390324] ACPI: Added _OSI(Processor Aggregator Device) [ 0.392520] ACPI: EC: Look up EC in DSDT [ 0.394729] ACPI: Interpreter enabled [ 0.396006] ACPI: (supports S0 S5) [ 0.396947] ACPI: Using IOAPIC for interrupt routing [ 0.398192] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.402430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.404113] PCI host bridge to bus 0000:00 [ 0.405187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.406517] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.408002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.409473] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.411065] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.412049] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.413872] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.416523] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.421142] pci 0000:00:01.1: reg 20: [io 0xc1e0-0xc1ef] [ 0.423726] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.424430] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.426281] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.428187] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.432027] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.434873] pci 0000:00:02.0: reg 14: [mem 0xfebe4000-0xfebe4fff] [ 0.443102] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref] [ 0.444202] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 0.446751] pci 0000:00:03.0: reg 10: [io 0xc1c0-0xc1df] [ 0.449067] pci 0000:00:03.0: reg 14: [mem 0xfebe5000-0xfebe5fff] [ 0.456544] pci 0000:00:03.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 0.458271] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 0.460548] pci 0000:00:04.0: reg 10: [mem 0xfeb80000-0xfeb9ffff] [ 0.463054] pci 0000:00:04.0: reg 14: [io 0xc000-0xc03f] [ 0.469612] pci 0000:00:04.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.471263] pci 0000:00:05.0: [8086:2668] type 00 class 0x040300 [ 0.472629] pci 0000:00:05.0: reg 10: [mem 0xfebe0000-0xfebe3fff] [ 0.478791] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.481131] pci 0000:00:06.0: reg 10: [io 0xc040-0xc07f] [ 0.483514] pci 0000:00:06.0: reg 14: [mem 0xfebe6000-0xfebe6fff] [ 0.490367] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.493122] pci 0000:00:07.0: reg 10: [io 0xc080-0xc0bf] [ 0.495493] pci 0000:00:07.0: reg 14: [mem 0xfebe7000-0xfebe7fff] [ 0.502372] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.505126] pci 0000:00:08.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.507489] pci 0000:00:08.0: reg 14: [mem 0xfebe8000-0xfebe8fff] [ 0.514375] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.517125] pci 0000:00:09.0: reg 10: [io 0xc100-0xc13f] [ 0.519501] pci 0000:00:09.0: reg 14: [mem 0xfebe9000-0xfebe9fff] [ 0.526372] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 0.529156] pci 0000:00:0a.0: reg 10: [io 0xc140-0xc17f] [ 0.531560] pci 0000:00:0a.0: reg 14: [mem 0xfebea000-0xfebeafff] [ 0.538383] pci 0000:00:0b.0: [1af4:1001] type 00 class 0x010000 [ 0.541126] pci 0000:00:0b.0: reg 10: [io 0xc180-0xc1bf] [ 0.543500] pci 0000:00:0b.0: reg 14: [mem 0xfebeb000-0xfebebfff] [ 0.550356] pci 0000:00:0c.0: [8086:25ab] type 00 class 0x088000 [ 0.552297] pci 0000:00:0c.0: reg 10: [mem 0xfebec000-0xfebec00f] [ 0.557370] pci_bus 0000:00: on NUMA node 0 [ 0.558449] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.560406] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.562375] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.564892] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.566870] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.568837] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.570929] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.572004] acpi root: \_SB_.PCI0 notify handler is installed [ 0.573376] Found 1 acpi root devices [ 0.574685] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.576003] vgaarb: loaded [ 0.576806] vgaarb: bridge control possible 0000:00:02.0 [ 0.578125] Error: Driver '88PM80X' is already registered, aborting... [ 0.580021] tps65010: version 2 May 2005 [ 0.612012] tps65010: no chip? [ 0.613078] SCSI subsystem initialized [ 0.614091] ACPI: bus type ATA registered [ 0.615199] libata version 3.00 loaded. [ 0.616062] Linux video capture interface: v2.00 [ 0.617253] pps_core: LinuxPPS API ver. 1 registered [ 0.618482] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.620007] PTP clock support registered [ 0.621131] Advanced Linux Sound Architecture Driver Initialized. [ 0.622588] PCI: Using ACPI for IRQ routing [ 0.624008] PCI: pci_cache_line_size set to 64 bytes [ 0.625527] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.626961] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.628100] irda_init() [ 0.628897] NET: Registered protocol family 23 [ 0.630052] Bluetooth: Core ver 2.16 [ 0.632007] NET: Registered protocol family 31 [ 0.633158] Bluetooth: HCI device and connection manager initialized [ 0.634631] Bluetooth: HCI socket layer initialized [ 0.635850] Bluetooth: L2CAP socket layer initialized [ 0.636007] Bluetooth: SCO socket layer initialized [ 0.637242] nfc: nfc_init: NFC Core ver 0.1 [ 0.640017] NET: Registered protocol family 39 [ 0.644223] Switching to clocksource kvm-clock [ 0.645415] pnp: PnP ACPI init [ 0.646294] ACPI: bus type PNP registered [ 0.647355] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.648078] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.649614] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.651628] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.653206] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.655258] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.656818] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.658829] pnp 00:03: [dma 2] [ 0.659726] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.661324] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.663369] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.664945] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.666966] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.668613] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.670256] pnp: PnP ACPI: found 7 devices [ 0.671330] ACPI: bus type PNP unregistered [ 0.677987] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.679344] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.680710] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.682190] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.683695] NET: Registered protocol family 2 [ 0.684996] TCP established hash table entries: 2048 (order: 3, 32768 bytes) [ 0.686656] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.688203] TCP: Hash tables configured (established 2048 bind 2048) [ 0.689772] TCP: reno registered [ 0.690684] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.692106] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.693613] NET: Registered protocol family 1 [ 0.694733] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.696169] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.697569] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.699066] pci 0000:00:02.0: Boot video device [ 0.700348] PCI: CLS 0 bytes, default 64 [ 0.701422] Unpacking initramfs... [ 1.128375] Freeing initrd memory: 23656k freed [ 1.137357] kvm: no hardware support [ 1.138600] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 1.139968] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.142239] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 1.144565] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.146038] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.147524] AVX or AES-NI instructions are not detected. [ 1.148825] AVX instructions are not detected. [ 1.149967] AVX instructions are not detected. [ 1.151104] AVX instructions are not detected. [ 1.152255] AVX2 or AES-NI instructions are not detected. [ 1.153570] AVX2 instructions are not detected. [ 1.154867] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.156426] VFS: Disk quotas dquot_6.5.2 [ 1.157476] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.159074] DLM installed [ 1.159906] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161410] NTFS driver 2.1.30 [Flags: R/W]. [ 1.162529] QNX6 filesystem 1.0.0 registered. [ 1.163665] fuse init (API version 7.22) [ 1.164771] JFS: nTxBlock = 1779, nTxLock = 14236 [ 1.166685] SGI XFS with security attributes, realtime, large block/inode numbers, debug enabled [ 1.168967] BeFS version: 0.9.3 [ 1.169869] bio: create slab at 1 [ 1.170985] Btrfs loaded [ 1.171776] msgmni has been set to 444 [ 1.173959] alg: No test for crc32 (crc32-table) [ 1.175199] alg: No test for stdrng (krng) [ 1.176299] NET: Registered protocol family 38 [ 1.177451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.179357] io scheduler noop registered (default) [ 1.180582] test_string_helpers: Running tests... [ 1.182240] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32 [ 1.183499] crc32: self tests passed, processed 225944 bytes in 211036 nsec [ 1.185336] crc32c: CRC_LE_BITS = 32 [ 1.186313] crc32c: self tests passed, processed 225944 bytes in 102419 nsec [ 1.188526] xz_dec_test: module loaded [ 1.189592] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it. [ 1.192070] no IO addresses supplied [ 1.193114] hgafb: HGA card not detected. [ 1.194180] hgafb: probe of hgafb.0 failed with error -22 [ 1.195616] uvesafb: failed to execute /sbin/v86d [ 1.196824] uvesafb: make sure that the v86d helper is installed and executable [ 1.198701] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 1.200255] uvesafb: vbe_init() failed with -22 [ 1.201412] uvesafb: probe of uvesafb.0 failed with error -22 [ 1.202830] ipmi message handler version 39.2 [ 1.203969] ipmi device interface [ 1.204934] IPMI System Interface driver. [ 1.206015] ipmi_si: Adding default-specified kcs state machine [ 1.207529] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 1.209955] ipmi_si: Interface detection failed [ 1.211110] ipmi_si: Adding default-specified smic state machine [ 1.212652] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 1.215047] ipmi_si: Interface detection failed [ 1.216207] ipmi_si: Adding default-specified bt state machine [ 1.217698] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.220061] ipmi_si: Interface detection failed [ 1.221217] ipmi_si: Unable to find any System Interface(s) [ 1.222565] IPMI Watchdog: driver initialized [ 1.223725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.225665] ACPI: Power Button [PWRF] [ 1.226754] xenfs: not registering filesystem on non-xen platform [ 1.232121] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 1.233474] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.257775] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.259584] lp: driver loaded but no devices found [ 1.260827] Non-volatile memory driver v1.3 [ 1.261931] ppdev: user-space parallel port driver [ 1.263140] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 1.264408] smapi::smapi_init, ERROR invalid usSmapiID [ 1.265678] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 1.267932] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 1.269828] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 1.271299] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.273487] Hangcheck: Using getrawmonotonic(). [ 1.274694] [drm] Initialized drm 1.1.0 20060810 [ 1.276672] parport_pc 00:04: reported by Plug and Play ACPI [ 1.278100] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 1.280106] lp0: using parport0 (interrupt-driven). [ 1.281323] lp0: console ready [ 1.282463] Floppy drive(s): fd0 is 1.44M [ 1.284053] loop: module loaded [ 1.285018] nbd: registered device at major 43 [ 1.286615] events: mcg drbd: 6 [ 1.289753] drbd: initialized. Version: 8.4.3 (api:1/proto:86-101) [ 1.291288] drbd: built-in [ 1.292141] drbd: registered as block device major 147 [ 1.293474] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 1.295371] c2port c2port0: C2 port uc added [ 1.296495] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 1.298866] FDC 0 is a S82078B [ 1.300122] Uniform Multi-Platform E-IDE driver [ 1.301815] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.304233] Loading iSCSI transport class v2.0-870. [ 1.305480] emc: device handler registered [ 1.306552] alua: device handler registered [ 1.307638] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.309172] osd: LOADED open-osd 0.2.1 [ 1.310226] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 1.312509] vcan: Virtual CAN interface driver [ 1.313707] slcan: serial line CAN interface driver [ 1.314938] slcan: 10 dynamic interface channels. [ 1.316128] CAN device driver interface [ 1.317184] sja1000 CAN netdevice driver [ 1.318230] sja1000_isa: insufficient parameters supplied [ 1.319643] w83977af_init() [ 1.320484] w83977af_open() [ 1.321318] w83977af_probe() [ 1.322269] w83977af_probe(), Wrong chip version [ 1.323201] w83977af_probe() [ 1.324505] w83977af_probe(), Wrong chip versionparide: comm registered as protocol 0 [ 1.326713] paride: k951 registered as protocol 1 [ 1.327917] paride: k971 registered as protocol 2 [ 1.329129] paride: epat registered as protocol 3 [ 1.330333] pd: pd version 1.05, major 45, cluster 64, nice 0 [ 2.174161] tsc: Refined TSC clocksource calibration: 2992.490 MHz [ 2.950051] pda: Autoprobe failed [ 2.955243] pd: no valid drive found [ 2.956286] pcd: pcd version 1.07, major 46, nice 0 [ 4.596186] pcd0: Autoprobe failed [ 4.597142] pcd: No CD-ROM drive found [ 4.598151] pf: pf version 1.04, major 47, cluster 64, nice 0 [ 4.599524] pf: No ATAPI disk detected [ 4.600546] pt: pt version 1.04, major 96 [ 6.226006] pt0: Autoprobe failed [ 6.226951] pt: No ATAPI tape drive detected [ 6.228067] pg: pg version 1.02, major 97 [ 7.841001] pga: Autoprobe failed [ 7.841972] pg: No ATAPI device detected [ 7.843189] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 7.846068] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.847343] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.848673] parport0: cannot grant exclusive access for device parkbd [ 7.918864] mousedev: PS/2 mouse device common for all mice [ 7.920297] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 7.922647] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 7.924765] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 7.927306] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 7.928891] rtc_cmos 00:00: RTC can wake from S4 [ 7.930348] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 7.931905] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 7.933686] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 7.935157] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 7.936655] i2c /dev entries driver [ 7.937627] i2c-parport: adapter type unspecified [ 7.938805] i2c-parport-light: adapter type unspecified [ 7.940239] pps pps0: new PPS source ktimer [ 7.941323] pps pps0: ktimer PPS source registered [ 7.942522] pps_ldisc: PPS line discipline registered [ 7.943791] Driver for 1-wire Dallas network protocol. [ 7.945088] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 7.946507] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 7.949538] md: raid1 personality registered for level 1 [ 7.950831] md: raid10 personality registered for level 10 [ 7.952187] md: raid6 personality registered for level 6 [ 7.953476] md: raid5 personality registered for level 5 [ 7.954766] md: raid4 personality registered for level 4 [ 7.956083] md: multipath personality registered for level -4 [ 7.957460] md: faulty personality registered for level -5 [ 7.958786] Bluetooth: Virtual HCI driver ver 1.3 [ 7.959999] Bluetooth: HCI UART driver ver 2.2 [ 7.961152] Bluetooth: HCI H4 protocol initialized [ 7.962358] Bluetooth: HCILL protocol initialized [ 7.963585] Bluetooth: HCIATH3K protocol initialized [ 7.964835] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 7.966326] cpuidle: using governor ladder [ 7.967397] cpuidle: using governor menu [ 7.968564] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.083118] panel: driver version 0.9.5 registered on parport0 (io=0x378). [ 8.084835] zram: Created 1 device(s) ... [ 8.085969] ashmem: initialized [ 8.086880] logger: created 256K log 'log_main' [ 8.088074] logger: created 256K log 'log_events' [ 8.089281] logger: created 256K log 'log_radio' [ 8.090460] logger: created 256K log 'log_system' [ 8.091677] hdaps: supported laptop not found! [ 8.092833] hdaps: driver init failed (ret=-19)! [ 8.094137] fake-fmc-carrier: mezzanine 0 [ 8.095202] Manufacturer: fake-vendor [ 8.096306] Product name: fake-design-for-testing [ 8.097595] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 8.099210] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 8.101676] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 8.103293] BUG: scheduling while atomic: swapper/1/0x10000002 [ 8.104703] CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-wl-06036-gaf15f8d #1 [ 8.106580] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 8.107966] 0000000000000000 ffff88000dc5bb00 ffffffff81b7bf27 ffff88000dc5bb10 [ 8.110313] ffffffff81b77ffd ffff88000dc5bb70 ffffffff81b848be ffffffff810dcf60 [ 8.112635] ffff88000dc5bfd8 ffff88000dc5bfd8 ffff88000dc5bfd8 ffff88000dc5bfd8 [ 8.114976] Call Trace: [ 8.115743] [] dump_stack+0x19/0x1b [ 8.117044] [] __schedule_bug+0x42/0x50 [ 8.118369] [] __schedule+0x50e/0x520 [ 8.119657] [] ? __enqueue_entity+0x70/0x80 [ 8.121115] [] __cond_resched+0x20/0x30 [ 8.122434] [] _cond_resched+0x33/0x40 [ 8.123749] [] wait_for_completion+0x2a/0x140 [ 8.125215] [] devtmpfs_create_node+0xf4/0x130 [ 8.126664] [] device_add+0x23e/0x6f0 [ 8.127969] [] device_create_vargs+0xd0/0x100 [ 8.129430] [] device_create+0x2f/0x40 [ 8.130750] [] ? mutex_lock+0x20/0x30 [ 8.132064] [] misc_register+0xc6/0x120 [ 8.133397] [] fc_probe+0x98/0x140 [ 8.134643] [] fmc_probe+0x12/0x20 [ 8.135878] [] really_probe+0x52/0x1f0 [ 8.137225] [] __driver_attach+0x91/0xa0 [ 8.138564] [] ? __device_attach+0x50/0x50 [ 8.139952] [] bus_for_each_dev+0x63/0xa0 [ 8.141382] [] driver_attach+0x19/0x20 [ 8.142703] [] bus_add_driver+0x1c8/0x260 [ 8.144091] [] ? fc_read+0xb0/0xb0 [ 8.145336] [] driver_register+0x6f/0x150 [ 8.146700] [] ? fc_read+0xb0/0xb0 [ 8.147960] [] fmc_driver_register+0x30/0x40 [ 8.149415] [] fc_init+0x10/0x20 [ 8.150635] [] do_one_initcall+0x79/0x117 [ 8.152000] [] kernel_init_freeable+0xfb/0x17c [ 8.153476] [] ? do_early_param+0x88/0x88 [ 8.154831] [] ? rest_init+0x90/0x90 [ 8.156144] [] kernel_init+0x9/0x180 [ 8.157424] [] ret_from_fork+0x7a/0xb0 [ 8.158745] [] ? rest_init+0x90/0x90 [ 8.160103] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 8.162448] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 8.164419] aedsp16: I/O, IRQ and DMA are mandatory [ 8.165647] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 8.167084] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 8.169040] ad1848: No ISAPnP cards found, trying standard ones... [ 8.170497] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 8.172409] I/O, IRQ, DMA and type are mandatory [ 8.173583] sb: Init: Starting Probe... [ 8.174606] sb: Init: Done [ 8.175424] uart6850: irq and io must be set. [ 8.176578] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 8.178678] ALSA seq_oss.c:236 can't register device seq [ 8.180080] ALSA mtpav.c:589 MTVAP port 0x378 is busy [ 8.181342] snd_mtpav: probe of snd_mtpav failed with error -16 [ 8.182783] snd_mts64: probe of snd_mts64.0 failed with error -5 [ 8.184312] snd_portman2x4: probe of snd_portman2x4.0 failed with error -5 [ 8.185996] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 8.187589] evbug: Connected device: input2 (PC Speaker at isa0061/input0) [ 8.189339] ALSA pcm_oss.c:3016 unable to register OSS PCM device 0:0 [ 8.192077] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 8.194155] NET: Registered protocol family 26 [ 8.195353] gre: GRE over IPv4 demultiplexor driver [ 8.196619] ip_gre: GRE over IPv4 tunneling driver [ 8.197983] TCP: cubic registered [ 8.198941] Initializing XFRM netlink socket [ 8.200124] NET: Registered protocol family 17 [ 8.201300] NET: Registered protocol family 4 [ 8.202459] NET: Registered protocol family 5 [ 8.203621] can: controller area network core (rev 20120528 abi 9) [ 8.205156] NET: Registered protocol family 29 [ 8.206328] IrCOMM protocol (Dag Brattli) [ 8.207702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.209069] Bluetooth: BNEP filters: protocol [ 8.210235] Bluetooth: BNEP socket layer initialized [ 8.211498] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.212967] Bluetooth: HIDP socket layer initialized [ 8.214249] NET: Registered protocol family 33 [ 8.215420] Key type rxrpc registered [ 8.216449] Key type rxrpc_s registered [ 8.217531] RxRPC: Registered security type 2 'rxkad' [ 8.218851] sctp: Hash tables configured (established 8192 bind 8192) [ 8.220510] sctp: sctp_init_sock(sk: ffff880005e2fb80) [ 8.221852] NET: Registered protocol family 21 [ 8.223030] Registered RDS/tcp transport [ 8.224120] tipc: Activated (version 2.0.0) [ 8.225310] NET: Registered protocol family 30 [ 8.226491] tipc: Started in single node mode [ 8.227645] NET: Registered protocol family 36 [ 8.228876] batman_adv: B.A.T.M.A.N. advanced 2013.2.0 (compatibility version 14) loaded [ 8.231191] [ 8.231191] printing PIC contents [ 8.232653] ... PIC IMR: ffff [ 8.233561] ... PIC IRR: 1153 [ 8.234476] ... PIC ISR: 0000 [ 8.235387] ... PIC ELCR: 0c00 [ 8.240583] printing local APIC contents on CPU#0/0: [ 8.241858] ... APIC ID: 00000000 (0) [ 8.242971] ... APIC VERSION: 00050014 [ 8.244014] ... APIC TASKPRI: 00000000 (00) [ 8.244531] ... APIC PROCPRI: 00000000 [ 8.244531] ... APIC LDR: 01000000 [ 8.244531] ... APIC DFR: ffffffff [ 8.244531] ... APIC SPIV: 000001ff [ 8.244531] ... APIC ISR field: [ 8.244531] 0000000000000000000000000000000000000000000000000000000000000000 [ 8.244531] ... APIC TMR field: [ 8.244531] 0000000002000000000000000000000000000000000000000000000000000000 [ 8.244531] ... APIC IRR field: [ 8.244531] 0000000000000000000000000000000000000000000000000000000000008000 [ 8.244531] ... APIC ESR: 00000000 [ 8.244531] ... APIC ICR: 00000831 [ 8.244531] ... APIC ICR2: 01000000 [ 8.244531] ... APIC LVTT: 000000ef [ 8.244531] ... APIC LVTPC: 00010000 [ 8.244531] ... APIC LVT0: 00010700 [ 8.244531] ... APIC LVT1: 00000400 [ 8.244531] ... APIC LVTERR: 000000fe [ 8.244531] ... APIC TMICT: 00034e89 [ 8.244531] ... APIC TMCCT: 00000000 [ 8.244531] ... APIC TDCR: 00000003 [ 8.244531] [ 8.271396] number of MP IRQ sources: 15. [ 8.272496] number of IO-APIC #0 registers: 24. [ 8.273666] testing the IO APIC....................... [ 8.274993] IO APIC #0...... [ 8.275855] .... register #00: 00000000 [ 8.276930] ....... : physical APIC id: 00 [ 8.278080] ....... : Delivery Type: 0 [ 8.279160] ....... : LTS : 0 [ 8.280257] .... register #01: 00170011 [ 8.281318] ....... : max redirection entries: 17 [ 8.282598] ....... : PRQ implemented: 0 [ 8.283725] ....... : IO APIC version: 11 [ 8.284896] .... register #02: 00000000 [ 8.285950] ....... : arbitration: 00 [ 8.287032] .... IRQ redirection table: [ 8.288133] 1 0 0 0 0 0 0 00 [ 8.289330] 0 0 0 0 0 1 1 31 [ 8.290522] 0 0 0 0 0 1 1 30 [ 8.291718] 0 0 0 0 0 1 1 33 [ 8.292945] 1 0 0 0 0 1 1 34 [ 8.294143] 1 1 0 0 0 1 1 35 [ 8.295336] 0 0 0 0 0 1 1 36 [ 8.296539] 0 0 0 0 0 1 1 37 [ 8.297734] 0 0 0 0 0 1 1 38 [ 8.298939] 0 1 0 0 0 1 1 39 [ 8.300151] 1 1 0 0 0 1 1 3A [ 8.301342] 1 1 0 0 0 1 1 3B [ 8.302537] 0 0 0 0 0 1 1 3C [ 8.303730] 0 0 0 0 0 1 1 3D [ 8.304954] 0 0 0 0 0 1 1 3E [ 8.306144] 0 0 0 0 0 1 1 3F [ 8.307341] 1 0 0 0 0 0 0 00 [ 8.308589] 1 0 0 0 0 0 0 00 [ 8.309789] 1 0 0 0 0 0 0 00 [ 8.310988] 1 0 0 0 0 0 0 00 [ 8.312193] 1 0 0 0 0 0 0 00 [ 8.313389] 1 0 0 0 0 0 0 00 [ 8.314588] 1 0 0 0 0 0 0 00 [ 8.315782] 1 0 0 0 0 0 0 00 [ 8.316992] IRQ to pin mappings: [ 8.317923] IRQ0 -> 0:2 [ 8.318910] IRQ1 -> 0:1 [ 8.319902] IRQ3 -> 0:3 [ 8.320907] IRQ4 -> 0:4 [ 8.321895] IRQ5 -> 0:5 [ 8.322883] IRQ6 -> 0:6 [ 8.323872] IRQ7 -> 0:7 [ 8.324835] IRQ8 -> 0:8 [ 8.325821] IRQ9 -> 0:9 [ 8.326799] IRQ10 -> 0:10 [ 8.327813] IRQ11 -> 0:11 [ 8.328878] IRQ12 -> 0:12 [ 8.329881] IRQ13 -> 0:13 [ 8.330882] IRQ14 -> 0:14 [ 8.331883] IRQ15 -> 0:15 [ 8.332901] .................................... done. [ 8.334264] registered taskstats version 1 [ 8.335454] Key type encrypted registered [ 8.337076] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 8.339183] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 8.340703] ALSA device list: [ 8.341573] #0: Internal PC-Speaker at port 0x61 [ 8.343518] Freeing unused kernel memory: 1036k freed [ 8.345255] Write protecting the kernel read-only data: 18432k [ 8.347853] Freeing unused kernel memory: 464k freed [ 8.350452] Freeing unused kernel memory: 616k freed [ 8.508690] init: Failed to create pty - disabling logging for job [ 8.510245] init: Temporary process spawn error: No such file or directory [ 8.536972] init: Failed to create pty - disabling logging for job [ 8.538526] init: Temporary process spawn error: No such file or directory [ 8.587755] init: mounted-tmp main process (136) terminated with status 32 [ 8.606007] init: Failed to create pty - disabling logging for job [ 8.607559] init: Temporary process spawn error: No such file or directory [ 8.620225] init: Failed to create pty - disabling logging for job [ 8.621798] init: Temporary process spawn error: No such file or directory [ 8.637122] init: Failed to create pty - disabling logging for job [ 8.638879] init: Temporary process spawn error: No such file or directory [ 8.653427] init: Failed to create pty - disabling logging for job [ 8.654972] init: Temporary process spawn error: No such file or directory [ 8.656962] udevd[166]: starting version 175 [ 8.688306] init: Failed to create pty - disabling logging for job [ 8.689859] init: Temporary process spawn error: No such file or directory [ 8.697997] init: Failed to create pty - disabling logging for job [ 8.699543] init: Temporary process spawn error: No such file or directory [ 8.707302] init: plymouth-log main process (172) terminated with status 1 [ 8.925427] init: Re-executing /init [ 9.987117] Unregister pv shared memory for cpu 0 [ 10.010796] Restarting system. [ 10.011679] reboot: machine restart Elapsed time: 15 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /tmp//kernel/x86_64-randconfig-c25-0701/af15f8de4f3a7b28e3a2c2064ad74106767516ca/vmlinuz-3.10.0-wl-06036-gaf15f8d-28183 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c25-0701/devel-cairo-x86_64-201307012240/.vmlinuz-af15f8de4f3a7b28e3a2c2064ad74106767516ca-20130701233130-9-bay branch=linux-devel/devel-cairo-x86_64-201307012240 BOOT_IMAGE=/kernel/x86_64-randconfig-c25-0701/af15f8de4f3a7b28e3a2c2064ad74106767516ca/vmlinuz-3.10.0-wl-06036-gaf15f8d' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::32279-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -soundhw hda -drive file=/fs/sda3/diska-bay-28183,media=disk,if=virtio -drive file=/fs/sda3/diskb-bay-28183,media=disk,if=virtio -drive file=/fs/sda3/diskc-bay-28183,media=disk,if=virtio -drive file=/fs/sda3/diskd-bay-28183,media=disk,if=virtio -drive file=/fs/sda3/diske-bay-28183,media=disk,if=virtio -drive file=/fs/sda3/diskf-bay-28183,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-bay-lkp-28183 -serial file:/dev/shm/kboot/serial-bay-lkp-28183 -daemonize -display none -monitor null