From: Pavel Machek <pavel@ucw.cz> To: Aaro Koskinen <aaro.koskinen@iki.fi>, olof@lixom.net, arnd@arndb.de, Andrew Morton <akpm@osdl.org> Cc: Tony Lindgren <tony@atomide.com>, b-cousson@ti.com, pali.rohar@gmail.com, kernel list <linux-kernel@vger.kernel.org>, linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, linux-omap@vger.kernel.org, trivial@kernel.org Subject: [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree) Date: Sat, 10 Aug 2013 13:27:40 +0200 [thread overview] Message-ID: <20130810112740.GA12456@amd.pavel.ucw.cz> (raw) In-Reply-To: <20130810110955.GA11437@amd.pavel.ucw.cz> On Sat 2013-08-10 13:09:55, Pavel Machek wrote: > On Fri 2013-08-02 01:43:55, Pavel Machek wrote: > > On Sun 2013-07-28 15:44:09, Pavel Machek wrote: > > > On Mon 2013-07-15 01:28:19, Aaro Koskinen wrote: > > > > Hi, > > > > > > > > On Sat, Jul 13, 2013 at 02:17:09PM +0200, Pavel Machek wrote: > > > > > > > > > > This adds device tree with neccessary support to boot with functional > > > > > video (on both emulator and real N900 device). > > > > > > > > > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > > > > > > > You can also add: > > > > > > > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > > > > > Benoit, could you apply this? Tony said you are doing dts changes, and > > > the patch seems to be ready. > > > > Tony, Benoit was apparently abducted by aliens or something. Is there > > chance you could take the patch? > > Hello, is there anybody out there? > > There's nice and simple patch enabling device tree on n900, it is even > reviewed by Aaro, and it is neither applied nor are negative comments > coming? ...for a month...? > > Tony also seen the patch and comment was "Benoit takes these", so I > assume it looks basically ok. > > Benoit, you are supposed to maintain device tree for omap2. >From archives I see Benoit is normally quite active... so I tried adding few more keywords to the subject line. Hopefully he's back from holidays and notices this...? > [I wonder if this is clean-enough cause for "trivial in resubmit > mode?] > Pavel > --- > > This adds device tree with neccessary support to boot with functional > video (on both emulator and real N900 device). > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > --- > > From v1: Aaro wants just GPLv2, so I did that. I re-enabled parts that > can be enabled on 3.10, and tested it on that kernel. > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f0895c5..1950aed 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ > omap3-devkit8000.dtb \ > omap3-beagle-xm.dtb \ > omap3-evm.dtb \ > + omap3-n900.dtb \ > omap3-tobi.dtb \ > omap3-igep0020.dtb \ > omap3-igep0030.dtb \ > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > new file mode 100644 > index 0000000..fb461bf > --- /dev/null > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -0,0 +1,92 @@ > +/* > + * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> > + * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > + > +/include/ "omap34xx.dtsi" > + > +/ { > + model = "Nokia N900"; > + compatible = "nokia,omap3-n900", "ti,omap3"; > + > + cpus { > + cpu@0 { > + cpu0-supply = <&vcc>; > + }; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x10000000>; /* 256 MB */ > + }; > + > +}; > + > +&i2c1 { > + clock-frequency = <2200000>; > + > + twl: twl@48 { > + reg = <0x48>; > + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ > + interrupt-parent = <&intc>; > + }; > +}; > + > +/include/ "twl4030.dtsi" > + > +&twl_gpio { > + ti,pullups = <0x0>; > + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > +}; > + > +&mmc1 { > + status = "disabled"; > +}; > + > +&mmc2 { > + status = "disabled"; > +}; > + > +&mmc3 { > + status = "disabled"; > +}; > + > +&mcspi1 { > + // For some reason, touchscreen is neccessary for screen to work at > + // all on real hw. It works well without it on emulator. > + // > + // Also... order in the device tree actually matters here. > + tsc2005@0 { > + compatible = "tsc2005"; > + spi-max-frequency = <6000000>; > + reg = <0>; > + }; > + mipid@2 { > + compatible = "acx565akm"; > + spi-max-frequency = <6000000>; > + reg = <2>; > + // turbo_mode = 0, > + // cs_per_word = 0 > + }; > +}; > + > +&usb_otg_hs { > + interface-type = <0>; > + usb-phy = <&usb2_phy>; > + mode = <2>; > + power = <50>; > +}; > -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree) Date: Sat, 10 Aug 2013 13:27:40 +0200 [thread overview] Message-ID: <20130810112740.GA12456@amd.pavel.ucw.cz> (raw) In-Reply-To: <20130810110955.GA11437@amd.pavel.ucw.cz> On Sat 2013-08-10 13:09:55, Pavel Machek wrote: > On Fri 2013-08-02 01:43:55, Pavel Machek wrote: > > On Sun 2013-07-28 15:44:09, Pavel Machek wrote: > > > On Mon 2013-07-15 01:28:19, Aaro Koskinen wrote: > > > > Hi, > > > > > > > > On Sat, Jul 13, 2013 at 02:17:09PM +0200, Pavel Machek wrote: > > > > > > > > > > This adds device tree with neccessary support to boot with functional > > > > > video (on both emulator and real N900 device). > > > > > > > > > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > > > > > > > > You can also add: > > > > > > > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > > > > > Benoit, could you apply this? Tony said you are doing dts changes, and > > > the patch seems to be ready. > > > > Tony, Benoit was apparently abducted by aliens or something. Is there > > chance you could take the patch? > > Hello, is there anybody out there? > > There's nice and simple patch enabling device tree on n900, it is even > reviewed by Aaro, and it is neither applied nor are negative comments > coming? ...for a month...? > > Tony also seen the patch and comment was "Benoit takes these", so I > assume it looks basically ok. > > Benoit, you are supposed to maintain device tree for omap2. >From archives I see Benoit is normally quite active... so I tried adding few more keywords to the subject line. Hopefully he's back from holidays and notices this...? > [I wonder if this is clean-enough cause for "trivial in resubmit > mode?] > Pavel > --- > > This adds device tree with neccessary support to boot with functional > video (on both emulator and real N900 device). > > Signed-off-by: Pavel Machek <pavel@ucw.cz> > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > --- > > From v1: Aaro wants just GPLv2, so I did that. I re-enabled parts that > can be enabled on 3.10, and tested it on that kernel. > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f0895c5..1950aed 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ > omap3-devkit8000.dtb \ > omap3-beagle-xm.dtb \ > omap3-evm.dtb \ > + omap3-n900.dtb \ > omap3-tobi.dtb \ > omap3-igep0020.dtb \ > omap3-igep0030.dtb \ > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > new file mode 100644 > index 0000000..fb461bf > --- /dev/null > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -0,0 +1,92 @@ > +/* > + * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> > + * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > + > +/include/ "omap34xx.dtsi" > + > +/ { > + model = "Nokia N900"; > + compatible = "nokia,omap3-n900", "ti,omap3"; > + > + cpus { > + cpu at 0 { > + cpu0-supply = <&vcc>; > + }; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x10000000>; /* 256 MB */ > + }; > + > +}; > + > +&i2c1 { > + clock-frequency = <2200000>; > + > + twl: twl at 48 { > + reg = <0x48>; > + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ > + interrupt-parent = <&intc>; > + }; > +}; > + > +/include/ "twl4030.dtsi" > + > +&twl_gpio { > + ti,pullups = <0x0>; > + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > +}; > + > +&mmc1 { > + status = "disabled"; > +}; > + > +&mmc2 { > + status = "disabled"; > +}; > + > +&mmc3 { > + status = "disabled"; > +}; > + > +&mcspi1 { > + // For some reason, touchscreen is neccessary for screen to work at > + // all on real hw. It works well without it on emulator. > + // > + // Also... order in the device tree actually matters here. > + tsc2005 at 0 { > + compatible = "tsc2005"; > + spi-max-frequency = <6000000>; > + reg = <0>; > + }; > + mipid at 2 { > + compatible = "acx565akm"; > + spi-max-frequency = <6000000>; > + reg = <2>; > + // turbo_mode = 0, > + // cs_per_word = 0 > + }; > +}; > + > +&usb_otg_hs { > + interface-type = <0>; > + usb-phy = <&usb2_phy>; > + mode = <2>; > + power = <50>; > +}; > -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2013-08-10 11:27 UTC|newest] Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-09 1:59 N900 device tree conversion: how to do first step Pavel Machek 2013-06-09 1:59 ` Pavel Machek 2013-06-09 9:24 ` Pali Rohár 2013-06-09 9:24 ` Pali Rohár 2013-06-09 16:47 ` Pavel Machek 2013-06-09 16:47 ` Pavel Machek 2013-06-09 17:03 ` Pali Rohár 2013-06-09 17:03 ` Pali Rohár 2013-06-09 17:03 ` Pali Rohár 2013-06-09 17:30 ` Pavel Machek 2013-06-09 17:30 ` Pavel Machek 2013-06-09 20:11 ` Aaro Koskinen 2013-06-09 20:11 ` Aaro Koskinen 2013-06-13 13:26 ` Pavel Machek 2013-06-13 13:26 ` Pavel Machek 2013-06-13 14:10 ` Tony Lindgren 2013-06-13 14:10 ` Tony Lindgren 2013-06-13 14:28 ` Pavel Machek 2013-06-13 14:28 ` Pavel Machek 2013-06-13 14:57 ` Tony Lindgren 2013-06-13 14:57 ` Tony Lindgren 2013-06-13 15:52 ` Pavel Machek 2013-06-13 15:52 ` Pavel Machek 2013-06-13 16:14 ` Tony Lindgren 2013-06-13 16:14 ` Tony Lindgren 2013-06-13 23:08 ` Pavel Machek 2013-06-13 23:08 ` Pavel Machek 2013-06-14 5:56 ` Tony Lindgren 2013-06-14 5:56 ` Tony Lindgren 2013-06-14 21:28 ` Pavel Machek 2013-06-14 21:28 ` Pavel Machek 2013-06-17 11:10 ` Tony Lindgren 2013-06-17 11:10 ` Tony Lindgren 2013-06-27 12:12 ` N900 device tree conversion: next steps Pavel Machek 2013-07-01 14:03 ` [PATCH] N900: fix operation on emulator Pavel Machek 2013-07-01 14:03 ` Pavel Machek 2013-07-01 18:22 ` Sergei Shtylyov 2013-07-01 18:22 ` Sergei Shtylyov 2013-07-01 18:22 ` Sergei Shtylyov 2013-07-01 19:51 ` Pavel Machek 2013-07-01 19:51 ` Pavel Machek 2013-07-01 20:00 ` Sergei Shtylyov 2013-07-01 20:00 ` Sergei Shtylyov 2013-07-01 20:53 ` Pavel Machek 2013-07-01 20:53 ` Pavel Machek 2013-07-01 21:15 ` [PATCH] N900: enable N900-specific drivers even if device tree is enabled Pavel Machek 2013-07-01 21:15 ` Pavel Machek 2013-07-04 11:47 ` Tony Lindgren 2013-07-04 11:47 ` Tony Lindgren 2013-07-01 21:17 ` [PATCH] N900: add device tree Pavel Machek 2013-07-01 21:17 ` Pavel Machek 2013-07-04 17:19 ` Aaro Koskinen 2013-07-04 17:19 ` Aaro Koskinen 2013-07-04 20:21 ` Pavel Machek 2013-07-04 20:21 ` Pavel Machek 2013-07-04 20:32 ` Aaro Koskinen 2013-07-04 20:32 ` Aaro Koskinen 2013-07-13 12:17 ` [PATCH v2] " Pavel Machek 2013-07-13 12:17 ` Pavel Machek 2013-07-14 22:28 ` Aaro Koskinen 2013-07-14 22:28 ` Aaro Koskinen 2013-07-28 13:44 ` Pavel Machek 2013-07-28 13:44 ` Pavel Machek 2013-08-01 23:43 ` Pavel Machek 2013-08-01 23:43 ` Pavel Machek 2013-08-10 11:09 ` Pavel Machek 2013-08-10 11:09 ` Pavel Machek 2013-08-10 11:09 ` Pavel Machek 2013-08-10 11:27 ` Pavel Machek [this message] 2013-08-10 11:27 ` [PATCH] ARM: dts: omap3 / n900 support, Benoit please take me (was Re: [PATCH v2] N900: add device tree) Pavel Machek 2013-08-10 11:46 ` [PATCH v2] N900: add device tree Belisko Marek 2013-08-10 11:46 ` Belisko Marek 2013-08-10 20:29 ` Jiri Kosina 2013-08-10 20:29 ` Jiri Kosina 2013-08-11 0:55 ` OMAP device tree maintainance (was Re: [PATCH v2] N900: add device tree) Pavel Machek 2013-08-11 0:55 ` Pavel Machek 2013-08-11 11:50 ` [PATCH v2] N900: add device tree Javier Martinez Canillas 2013-08-11 11:50 ` Javier Martinez Canillas 2013-08-11 13:47 ` Pavel Machek 2013-08-11 13:47 ` Pavel Machek 2013-08-11 13:47 ` Pavel Machek 2013-08-12 7:37 ` Tony Lindgren 2013-08-12 7:37 ` Tony Lindgren 2013-08-12 7:36 ` Tony Lindgren 2013-08-12 7:36 ` Tony Lindgren 2013-08-11 15:02 ` Javier Martinez Canillas 2013-08-11 15:02 ` Javier Martinez Canillas 2013-08-13 10:50 ` Benoit Cousson 2013-08-13 10:50 ` Benoit Cousson 2013-08-13 13:36 ` [PATCH v3] " Pavel Machek 2013-08-13 13:36 ` Pavel Machek 2013-08-13 14:06 ` Benoit Cousson 2013-08-13 14:06 ` Benoit Cousson 2013-06-26 15:14 ` N900 device tree conversion: first step Pavel Machek 2013-07-19 18:14 ` N900 device tree conversion: how to do " Sebastian Reichel 2013-07-19 18:14 ` Sebastian Reichel 2013-07-19 18:14 ` Sebastian Reichel 2013-07-28 13:37 ` Pavel Machek 2013-07-28 13:37 ` Pavel Machek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20130810112740.GA12456@amd.pavel.ucw.cz \ --to=pavel@ucw.cz \ --cc=aaro.koskinen@iki.fi \ --cc=akpm@osdl.org \ --cc=arnd@arndb.de \ --cc=b-cousson@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=olof@lixom.net \ --cc=pali.rohar@gmail.com \ --cc=tony@atomide.com \ --cc=trivial@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.